SO-03D INSTRUCTION MANUAL ’11.10 Introduction Thank You for Your Purchase of "SO-03D"

SO-03D INSTRUCTION MANUAL ’11.10 Introduction Thank you for your purchase of "SO-03D". For proper use of the SO-03D, read this manual carefully before and while you use the SO-03D. Before using the terminal

● The SO-03D supports W-CDMA, GSM/GPRS and Wireless LAN Systems. ● Because the terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the terminal, in locations with weak radio wave condition, or outside of the FOMA's service area. The FOMA services may not be available on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you. On occasion, your calls may become disconnected even in areas with strong radio wave condition, even if you are not moving, or even if there are 4-antenna marks in the terminal's display. ● Note that because the terminal operates on radio frequencies, your calls are at risk of being intercepted by the third party. However, the W-CDMA, GSM/GPRS system automatically scrambles all calls through a private call feature. Therefore, even if third party successfully intercepts your call, they will only hear noise. ● The terminal operates on radio frequencies by converting voice into digital signals. If the caller moves into an area of adverse radio wave condition, the digital signal may not restored accurately, and the voice received in the call may differ slightly from the actual voice. ● Always keep the information you save in the terminal in a separate note. Even if the data may be lost as a result of malfunction, repair, change, or other handling of the terminal, under no condition will DOCOMO be held liable for any lost data saved in the terminal. ● You are recommended to save important data to microSD card. ● As with PCs, some user-installed applications may disrupt the stability of the terminal performance, or unexpectedly transmit information via the Internet causing improper use of your location information as well as personal information recorded on the terminal. Therefore, verify the supplier and operating conditions of the applications to be used before using them. ● This terminal has FOMA Plus-Area and FOMA HIGH-SPEED Area support. ● Descriptions in this manual are for the terminal with a DOCOMO's UIM inserted. SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ● The SIM unlock service is provided at a docomo Shop. ● A SIM unlock charge is separately required. ● If you use a SIM other than by DOCOMO, available services and functions will be limited. DOCOMO is not liable to any failures or malfunctions. ● For details of SIM unlock, refer to NTT DOCOMO website. ･ Battery Pack SO04 Accessories

Supplied accessories ･ SO-03D (with warranty and Back Cover SO17) ･ AC Adapter Cable SO03 (with warranty)

･ microSDHC card (16GB)* (Sample) ･ Quick Start Guide (In Japanese only) (with instruction manual)

クイックスタートガイド * Inserted in the terminal when purchased.

･ Stereo Headset with Microphone (Sample) (with instruction manual)

･ Notes on usage Safety/Handling precautions (In Japanese only) For details on optional devices, see "Optional and related devices" (P.193). 1 ❖Cautions About manuals of SO-03D ･ For downloading or updating the application, a high packet communication charge will be applied In addition to this manual, the operations of because of a large amount data communication. SO-03D are described in "Quick Start Guide" For this reason, subscription of packet flat-rate (in Japanese only) and "Instruction Manual" service is highly recommended. * If you use Wi-Fi function to download, packet application of the terminal. communication charges are not applied.

"Quick Start Guide" "Instruction Manual" (PDF file) (Supplied accessories) Operations and settings of each function are The initial operations and settings after explained. purchasing the terminal, screen view It can be downloaded from NTT DOCOMO contents and operations of main function are website. explained. (In Japanese only) http://www.nttdocomo.co.jp/english/support/ trouble/manual/download/index.html "Instruction Manual" * The URL and contents are subject to (Application of the terminal) change without prior notice. Similarly to this manual, operations and ❖Cautions settings of each function are explained. ･ Reproduction or reprint of all or part of this manual To use "Instruction Manual" application, from without prior permission is prohibited. ･ Important information for SO-03D is posted in the the Home screen, tap X [Instruction following website. Be sure to check before using. Manual]. For the first time using, download http://www.sonyericsson.co.jp/support/ and install it according to the onscreen use_support/product/so-03d/ instructions. You can use the application as an electronic book. You can also shift to actual operations by tapping the description in the contents or view reference contents.

2 ･ Please note that "SO-03D" is called the "the Operation descriptions terminal" in this manual. In this manual, each key operations are described with p, x, y, t, s, m. And selection operations of the icons or function items on the touch panel are described as follows.

Description Operation From the Home From the Home screen, press screen, press t (Menu) key and tap t and tap "Settings" on the screen. [Settings]. Tap [Settings] X Tap "Settings" displayed on the [Date & time] X screen, and then tap "Date & [Set date]. time" on the next screen and "Set date" on the following screen in order. Tap to Tap displayed on the zoom out or in. screen to zoom out or in the map. Touch and hold Keep touching an icon on the an icon. screen longer (1-2 seconds).

❖Information ･ In this manual, the instructions are described with the default Home screen. If you set the other application to the home screen, the operations may differ from the descriptions. ･ Display examples and illustrations used in this manual are just images for explanations and may be different from actual ones. ･ In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures.

3 Contents

Accessories ...... 1 About manuals of SO-03D ...... 2 Safety Precautions (Always follow these directions) ...... 9 Handling precautions ...... 18

･ Part names and functions ...... 25 ･ UIM...... 27 ･ microSD card ...... 28 ･ Charging ...... 29 ･ Turning power on and off ...... 34 ･ Initial settings (Setup guide) ...... 35 ･ Status bar ...... 36 Before Using the Handset ･ Notification panel ...... 38 →P. 2 5 ･ Notification LED...... 38 ･ Basic operations ...... 39 ･ Home screen...... 42 ･ Searching information in the terminal and web pages ...... 47 ･ Applications screen ...... 48 ･ Character entry ...... 56 ･ Settings of entering characters...... 65 ･ Settings of Japanese keyboard ...... 66 ･ Making/Receiving calls ...... 71 Calling/Network Services ･ Call log ...... 75 →P. 7 1 ･ Contacts...... 76 ･ Network Services ...... 85

Contents/Precautions 4 ･ Viewing the setting menu ...... 93 ･ Wireless & networks ...... 93 ･ Call settings...... 102 ･ Sound...... 103 ･ Display ...... 105 ･ Location & security...... 106 Settings ･ Applications ...... 111 ･ Accounts & sync ...... 114 →P. 9 3 ･ Privacy...... 117 ･ Storage...... 118 ･ Language & keyboard ...... 119 ･ Voice input & output...... 119 ･ Accessibility ...... 120 ･ Date & time...... 120 ･ About phone...... 121 ･ sp-mode mail ...... 122 ･ Message (SMS)...... 122 Mail/Internet ･ Email...... 124 ･ Using Gmail...... 131 →P.122 ･ Google Talk (Chat) ...... 131 ･ Early warning "Area Mail" ...... 132 ･ Using Browser...... 133 ･ Handling a file ...... 138 File management ･ Transferring and moving data ...... 138 ･ Using Bluetooth function...... 143 →P.138 ･ Sharing files with DLNA devices via Connected devices (Media server) ...... 147 Games ･ Use the terminal as a gaming console...... 148 →P.148

Contents/Precautions 5 ･ Using the camera...... 150 ･ Shooting screenshot ...... 158 ･ Playing multimedia content...... 158 ･ Viewing photos/videos with Gallery ...... 160 ･ Playing video with YouTube...... 163 ･ Music player...... 165 Applications ･ TrackID ...... 168 ･ Using Android Market ...... 168 →P.150 ･ Using docomo market...... 169 ･ TimescapeTM ...... 170 ･ About location services...... 174 ･ Calendar...... 179 ･ Clock/Alarm...... 181 ･ OfficeSuite...... 183 ･ Other applications...... 183 ･ Overview of International roaming (WORLD WING) ...... 186 International roaming ･ Available Services...... 186 →P.186 ･ Before using ...... 187 ･ Making/Receiving calls in the country you stay...... 190 ･ Optional and related devices...... 193 ･ Troubleshooting...... 193 ･ Warranty and After Sales Services...... 198 ･ Updating software...... 201 Appendix/Index ･ Main specifications ...... 203 ･ Specific Absorption Rate of Mobile Phone, etc...... 206 →P.193 ･ End User Licence Agreement...... 219 ･ About Open Source Software...... 220 ･ Export Controls and Regulations ...... 220 ･ Intellectual Property Right...... 220 ･ Index ...... 224

Contents/Precautions 6 Notes on usage ･ You can perform software update by downloading an update file with a PC via ･ The terminal does not support i-mode sites Internet and connecting the PC to the (programs) or i-Dppli. terminal. For details, see "Connecting to a ･ The terminal automatically performs PC and updating" (P.202). communication for synchronizing data, By some software updates, the operating checking the latest software version, ･ system (OS) may be version-upgraded for maintain connection with the server, etc. If improving the terminal quality. For this you transmit a large amount of data such reason, you always need to use the latest as downloading applications or watching OS version. And some applications that movie, a packet communication charge used in the previous OS version may not becomes high. Subscription of packet flat- be available or some unintended bugs rate service is highly recommended. may occur. ･ Public mode (Driving mode) is not If you use the terminal with a part of FOMA supported. ･ cards (green) inserted, voice calls and ･ Setting the phone to silent mode does not packet communication may not be mute sounds (playback of video or music, available with some overseas network alarm, etc.) other than the ringtone, operators or in some overseas networks. operation sound, and notification sounds. For using overseas, please visit a docomo ･ The names of the operators are displayed Shop near you. DOCOMO exchanges UIM on the key unlocking screen (P.35). (FOMA card) (green) free of charge. ･ Your phone number (own number) can be Set the screen lock to ensure the security checked as follows: ･ of your terminal for its loss. For details, see From the Home screen, press t and "Screen lock" (P.109). tap [Settings] X [About phone] X [Status]. ･ The software version of your terminal can be checked as follows: From the Home screen, press t and tap [Settings] X [About phone].

Contents/Precautions 7 Continued on next page ･ If your terminal is lost, change your each ･ In the initial settings for tethering, security account password to invalidate setting is not made. Make a security authentication using a PC to prevent other setting as required. persons from using Google services such ･ For details on usage charge, etc., refer to as Google Talk, Gmail, Android Market, http://www.nttdocomo.co.jp/ . etc., Facebook, Twitter and mixi. ･ The terminal supports only sp-mode, Notice: mopera U and Business mopera Internet. This device has been granted a designation Other providers are not supported. number by the Ministry of Internal Affairs and ･ To use tethering, subscription of sp-mode Communications according to the Ordinance is required. concerning the Technical Regulations ･ Packet communication charge when using Conformity Certification etc. of Specified tethering varies depending on the Radio Equipment charging plan you use. Subscription of packet flat-rate service is highly (特定無線設備の技術基準適合証明等に関す recommended. る規則) ･ If you subscribe packet flat-rate service, R-(W-CDMA)/Article 2-1-11-3: packet communication charge is treated 202XYSM1156964 as "communications connected to an R-(W-CDMA) /Article 2-1-11-7: 202MWSM1156964 external device such as a PC". If tethering IEEE802.11bgn (2.4GHz)/Article 2-1-19: is enabled, all packet communication 202WWSM1156964 charge is treated as "communications BT/Article 2-1-19: 202WWSM11569641 connected to an external device such as a ANT+/Article 2-1-19: 202WWSM11569642 PC" even if any external device is not T-(W-CDMA): AD 11-0022 202 connected. This device should not be modified Make sure to deactivate tethering as soon (otherwise the granted designation number as communication with an external device will become invalid) is completed.

Contents/Precautions 8 ■ The following symbols indicate specific Safety Precautions (Always directions. follow these directions) Indicates prohibited actions. Don’t ■ For safe and proper use of the terminal, please read the "Safety Precautions" prior to use. Indicates not to disassemble. Keep the Manual in a safe place for future reference. No disassembly ■ ALWAYS observe the safety precautions since Indicates not to handle with wet hands. they intend to prevent personal injury or No wet hands property damage. Indicates not to use where it could get The following symbols indicate the different ■ wet. levels of injury or damage that may result if the No liquids guidelines are not observed and the terminal Indicates compulsory actions in is used improperly. accordance with instructions. Failure to observe Do these guidelines may Indicates to remove the power plug from DANGER immediately result in the outlet. death or serious injury. Unplug Failure to observe ■ "Safety Precautions" are described in the these guidelines may following categories: WARNING result in death or 1. Handling the terminal, Battery Pack, AC serious injury. Adapter cable, and UIM (general)...... 10 Failure to observe 2. Handling the terminal...... 11 these guidelines may 3. Handling the Battery Pack ...... 13 CAUTION result in injury and 4. Handling the AC Adapter cable...... 14 property damage. 5. Handling the UIM...... 16 6. Handling the terminal near electronic medical equipment...... 16 7. Material list ...... 17

Contents/Precautions 9 1. Handling the terminal, Battery Pack, AC Adapter cable, and UIM WARNING Do not throw the equipment, put strong force (general) or give hard shock to it. Doing so may cause fire, burns, injury or DANGER Don’t electric shock. Do not use, store, or leave the terminal, Do not allow the microUSB connection jack battery pack, AC adapter cable, or UIM in a or headset connection jack to come in place subject to high temperature such as contact with conducting foreign substances close to fire, under direct sunlight, or in a car (a piece of metal, pencil lead, etc.). Never Don’t on an extremely hot day. allow these objects to get into the connection Doing so may cause fire, burns or injury. Don’t jack. Doing so may cause fire, burns, injury or Do not place the terminal, battery pack, AC electric shock. adapter cable, or UIM inside cooking appliance such as a microwave oven or high- Do not cover or wrap the terminal, battery pressure containers. pack, AC adapter cable, or UIM with a cloth Don’t Doing so may cause fire, burns, injury or or bedding in use or while charging. electric shock. Don’t Doing so may cause fire or burns.

Do not disassemble or modify the terminal, Power off the terminal before you step into a battery pack, AC adapter cable, or UIM. place where flammable gas can leak, such Doing so may cause fire, burns, injury or as gas stations. Do not charge the battery. No disassembly electric shock. Do Gas may catch fire.

Do not let the terminal, battery pack, AC If you notice anything unusual about the adapter cable, or UIM get wet with water, terminal, battery pack, AC adapter cable, or drinking water, urine of pet animals, etc. UIM such as an unusual odor, overheating, No liquids Doing so may cause fire, burns, injury or discoloration or deformation during electric shock. operation, charging or storage, immediately perform the following measures. Use the battery pack and AC adapter cable ・Remove the power plug from the power for the terminal specified by DOCOMO. Do outlet. Failure to do so may cause fire, burns, injury ・Power off the terminal. Do or electric shock. ・Remove the battery pack from the terminal. Failure to do so may cause fire, burns, injury or electric shock.

Contents/Precautions 10 2. Handling the terminal CAUTION Do not place on an unstable or inclined platform. WARNING Doing so may cause the device to fall and Do not turn on the photo light with the Don’t cause injury. lighting luminescence part close to the eyes. Especially to shoot infants or young children, Do not keep in a place that is very humid, step away from them more than 1 m. dusty, or subject to high temperature. Don’t Doing so may cause blurred vision. Or injury Doing so may cause fire, burns or electric by dazzling eyes or surprising may occur. Don’t shock. Do not allow a foreign substance such as If children use the terminal, parents or water and other liquids, metal parts, or guardians should give them the proper flammables to get in the UIM or microSD instructions for use. Make sure that they use card insertion slot on the terminal. Don’t Do the terminal as instructed. Doing so may cause fire, burns, injury or Failure to do so may cause injury. electric shock.

Keep the terminal, battery pack, AC adapter Do not turn on the light toward a driver of a cable, or UIM out of the reach of babies and car etc. infants. Doing so may disturb driving and cause an Don’t Do Failure to do so may cause accidental accident. swallowing or injury.

Be careful especially when you use the terminal while it has been continuously connected to the AC adapter cable for a long period of time. If you play a game, etc. for a long time while charging, the temperature of the terminal, battery pack and AC adapter cable may Do rise. If you are directly in contact with hot parts for a long period of time, it may cause your skin to become red, itchy, or develop a rash depending on your physical condition and also it may cause low-temperature burn.

Contents/Precautions 11 WARNING WARNING Power off the terminal in a place where the If you are wearing any electronic medical use is prohibited such as in airplane or equipment, check with the relevant medical hospital. electronic equipment manufacturer or vendor Failure to do so may affect electronic whether the operation may be affected by equipment and electronic medical Do radio waves. equipment. If you set the automatic power- The radio waves from the terminal may on function, cancel it before powering off the affect electronic medical equipment. terminal. Follow the instructions of each medical Power off the terminal near electronic facility for the use of mobile phones on their devices or equipment operating on high premises. precision control or weak signals. Prohibited acts such as mobile phone usage Failure to do so may interfere with the Do on board an airplane may be punished by operation of electronic devices or law. If usage of mobile phones in an aircraft equipment. is admitted by setting airplane mode, etc., * The followings are some electronic devices use the terminal under the direction of the or equipment that you should be careful of: airline. Hearing aids, implantable cardiac If the microUSB cable is connected into the pacemaker, implantable cardioverter microUSB connection jack for charging etc., defibrillator, other electronic medical the terminal is automatically powered on. Be Do equipment, fire detector, automatic door, careful not to connect the microUSB cable in and other automatically controlled devices a place where the use is prohibited such as or equipment. in airplane or hospital. If you use an implantable cardiac pacemaker, implantable cardioverter Always keep the terminal away from your ear defibrillator, or other electronic medical when you talk setting the hands-free equipment, check with the relevant function. medical electronic equipment Also, when you play game, play back music, manufacturer or vendor whether the etc. connecting the Earphone/Microphone, operation can be affected by radio waves. etc. to the terminal, adjust the volume Do adequately. Be careful about broken glasses or exposed If the volume is too loud, it may cause internal from the terminal if the display or the difficulty in hearing. Moreover, if you barely camera lens is broken. hear the surrounding sounds, it may cause Shatterproof film-applied hardened glass is an accident. used on the display surface and the acrylic Do resin is applied on camera lens so as not to If you have a weak heart, set the vibrator or be shattered when broken. But they may ringtone volume carefully. cause injury if you touch a cut surface or Do Failure to do so may affect your heart. exposed portion mistakenly.

Contents/Precautions 12 CAUTION CAUTION Do not swing the terminal around by holding When opening or closing the terminal, take the strap, etc. care not to have your fingers or strap caught The terminal may hit you or others and by the terminal. Don’t cause accident such as injury. Do Failure to do so may cause injury.

Do not use damaged terminal. When watching the display, take a certain Doing so may cause fire, burns, injury or distance from the display in a fully bright Don’t electric shock. place. Do Failure to do so may reduce visual acuity. If the display is mistakenly damaged and when the liquid crystal runs out, do not get it on your skin such as face, hands, etc. 3. Handling the Battery Pack Doing so may cause blindness or injury on your skin. ■ Check the type of the battery by the label on If the liquid crystal gets in your eye or the battery pack. Don’t mouth, rinse with clean running water, and Display Type of Battery get medical treatment immediately. Also, if it gets on your skin or clothes, use Li-ion 00 Lithium Ion Battery something such as alcohol to wipe off and wash it with soap in clear water. DANGER To use the terminal in car, check with Do not touch the battery pack terminal with a automobile manufacturer or dealer to metal object such as a wire. Also, do not determine how the device is affected by radio carry or keep the battery pack together with waves before using. metal objects such as a necklace. In rare cases, using the phone in some Don’t Doing so may cause battery pack to ignite, Do vehicle models can cause the vehicle's explode, overheat or leak. electronic equipment to malfunction. In that case, stop using the terminal immediately. Check the orientation of battery pack to install it to the terminal, and do not forcibly The use of the terminal may cause itching, attach the battery pack to the terminal if you rashes, eczema, or other symptoms are having trouble installing it. depending on the user's physical condition. Don’t Doing so may cause battery pack to ignite, Immediately stop using and get medical explode, overheat or leak. Do treatment in such a case. For material of each part, →P.17 "Material Do not throw the battery pack into fire. list". Doing so may cause battery pack to ignite, Don’t explode, overheat or leak.

Contents/Precautions 13 DANGER CAUTION Do not stick a nail into the battery pack, hit it Do not discard the battery pack together with with a hammer, or step on it. other garbage. Doing so may cause battery pack to ignite, The battery pack may become the source of Don’t explode, overheat or leak. fire or environmental destruction. Take the used battery pack to our service counter If the battery fluid gets into your eyes, do not (docomo Shop, etc.) after insulating it by rub, rinse with clean running water, and get Don’t affixing an adhesive tape on the terminal of it medical treatment immediately. or follow the instructions of the local Do Failure to do so may cause blindness. authorities in charge of collecting used battery packs. WARNING Do not use or charge the wet battery pack. Doing so may cause battery pack to ignite, If the battery pack seems to have explode, overheat or leak. abnormalities such as deformation or Don’t scratches due to falling, never use it. If fluid etc. leaks out from battery pack, do Don’t Doing so may cause battery pack to ignite, not make the fluid contact with your skin of explode, overheat or leak. face or hands. Doing so may cause blindness or injury on If the battery pack leaks or hears an unusual your skin. odor, immediately stop using and move it If the fluid etc. put into your eyes or mouth, away from fire. Do or contacts skin or clothes, immediately Do The leaking liquid may ignite fire, catch fire, flush the contacted area with clean running or explode. water. Be careful about your pet not to bite the If the fluid put into the eyes or mouth, battery pack. immediately see a doctor after flushing. Failure to do so may cause battery pack to Do ignite, explode, overheat or leak. 4. Handling the AC Adapter cable WARNING Do not use the microUSB cable if it is damaged. Doing so may cause fire, burns or electric Don’t shock.

Contents/Precautions 14 WARNING WARNING Do not use the AC adapter cable in a very Use the adapter only on the specified power humid or steamy place such as bathroom. supply and voltage. Doing so may cause fire, burns or electric Use the AC adapter cable available overseas Don’t shock. when you charge the battery overseas. Failure to do so may cause fire, burns or Do not touch the AC adapter cable if you Do electric shock. hear thunder. AC adapter cable: AC 100 V to 240 V (Make Don’t Doing so may cause electric shock. sure to connect the adapter to a household AC power outlet.) Do not short-circuit the microUSB plug while it is connected to the power outlet. Do not Clean dust from the power plug. touch the microUSB plug with your hands, Failure to do so may cause fire, burns or fingers, or any part of your body. Do electric shock. Don’t Doing so may cause fire, burns or electric shock. When you connect the AC adapter to the power outlet, insert it firmly. Do not place any heavy objects on the Failure to do so may cause fire, burns or microUSB cable. Do electric shock. Doing so may cause fire, burns or electric Don’t shock. Hold the AC adapter, not the microUSB cable, when you remove the power plug from When you insert and remove AC adapter the power outlet. from power outlet, do not contact a metal Do Failure to do so may cause fire, burns or strap or other metal objects with the jack. electric shock. Don’t Doing so may cause fire, burns or electric shock. Remove the power plug from the power outlet when not used for a long period of Do not touch the cord of the AC adapter time. cable or the power outlet with wet hands. Unplug Failure to do so may cause fire, burns or Doing so may cause fire, burns or electric electric shock. No wet hands shock. If liquid such as water gets into the adapter, immediately remove it from the power outlet. Failure to do so may cause fire, burns or Unplug electric shock.

Contents/Precautions 15 WARNING WARNING Before cleaning, remove the power plug from Please observe the following guidelines in the power outlet. medical facilities. Failure to do so may cause fire, burns or ・Do not take the terminal into the operating Unplug electric shock. rooms, ICU (Intensive Care Unit), or CCU (Coronary Care Unit). ・Power off the terminal inside hospital 5. Handling the UIM wards. ・Power off the terminal in the lobby and other places if there are any electronic Do CAUTION medical equipment operating in the Please be careful not to touch a cut surface vicinity. when you remove the UIM. ・Follow the instructions of each medical Do Failure to do so may cause injury. facility when they specify areas forbidding to use and carrying a mobile phone. ・If you set the automatic power-on function, 6. Handling the terminal near cancel it before powering off the terminal. electronic medical equipment Power off the terminal in crowded places ■ The following instructions observe the such as rush-hour trains. There may be a guidelines of the Electromagnetic person with an implantable cardiac Compatibility Conference, Japan to protect pacemaker or implantable cardioverter electronic medical equipment from radio defibrillator near you. waves from mobile phones. Do The radio waves from the terminal may affect the operation of implantable cardiac pacemaker or implantable cardioverter defibrillator.

Wearers of electronic medical equipment such as implanted pacemakers or defibrillators must carry and use terminal at least 22 cm away from the implanted device. Do The radio waves from the terminal may affect the performance of electronic medical equipment.

Contents/Precautions 16 Surface Part Material WARNING treatment If you need to use electronic medical Inner PC resin (with UV coating equipment other than implantable cardiac packaging glass)+SUS+ pacemaker or implantable cardioverter (front and back PET resin defibrillator outside medical facilities such as treating at home, check with the relevant part when game medical electronic equipment manufacturer keypad open) Do whether the operation may be affected by Hardware key PC resin UV coating radio waves. (△/□/○/× The radio waves from the terminal may keys, Direction affect the performance of electronic medical key) equipment. Hardware key PC resin UV coating 7. Material list (Game menu button of the game keypad, Surface Part Material Select button, treatment Start button) Exterior case PC resin Non-conductive Hardware key PET resin UV coating (Front) (with glass) vacuum (Touch pad) metallization (tin)+ UV coating Inner PCM resin None packaging Hardware key PC resin Non-conductive (Slide rail) (Back key, vacuum Home key, metallization (tin)+ Transparent PMMA resin AR coating+ Menu key, UV coating plate (Camera Non-conductive Search key) lens cover) vacuum metallization (tin)+ Transparent Hardened Hard coating UV coating plate (Display) glass+ PET resin Transparent PMMA resin AR coating+ plate (Photo Non-conductive Inner PC resin UV coating light cover) vacuum packaging metallization (tin)+ (panel part UV coating when game keypad open)

Contents/Precautions 17 Continued on next page Surface Part Material treatment Handling precautions Exterior case PC resin Non-conductive (Lateral side of (with glass) vacuum ■ Common precautions body) metallization (tin)+ ･ Do not expose to water. UV coating The terminal, battery pack, AC Adapter cable, Hardware key PC resin Non-conductive and UIM are not waterproof. Do not use them in (L button, (with glass) vacuum a humid place such as bathroom or in the rain. R button) metallization (tin)+ If you carry the terminal on your body, UV coating perspiration may corrode the internal parts of the terminal and cause malfunction. Note that if Hardware key PC resin UV coating a trouble is diagnosed as exposure to water or (Volume key, other liquid, repairs of the terminal may not be Power key) covered by the Warranty or it may not be Back Cover PC resin UV coating possible to repair such phones. In that case, (with glass) even if the terminal can be repaired, it is repaired at the owner's expense. ･ Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses). - Do not rub it roughly with a dry cloth. The display may be damaged. - Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzene, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration.

Contents/Precautions 18 Continued on next page ･ Clean the terminals occasionally with a ■ The terminal precautions dry cotton swab. ･ Do not press touch panel surface If the jack is soiled, connection gets worse and forcibly, or not operate with a sharp- it may cause power to be turned off or pointed objects such as nail, ballpoint insufficient battery charge, so clean the jack pen, pin, etc. with a dry cotton swab etc. When cleaning, be Doing so may cause damage of touch panel. careful not to damage the terminals. Do not use the terminal in extremely hot ･ Do not leave the terminal near the air ･ conditioning vent. or cold places. Use the terminal within a temperature range of Extreme temperature changes may produce 5°C to 35°C and a humidity range of 45% to condensation and corrode the internal parts of 85%. the terminal, causing it to malfunction. Using the terminal near ordinary phone, ･ Make sure to use the terminal or battery ･ pack without excessive force. television or radio may cause If you put the terminal in a bag full of items or sit interference in these electric down with the terminal in the pocket of your appliances. Make sure to move far away cloth, it may damage the display, and internal from them when using the terminal. circuit board, and the battery pack and cause ･ Note down the information saved in the the terminal to malfunction. terminal in a separate note and keep it Also, while the external device is connected to safely. the microUSB connection jack or headset connection jack, it may damage the connector Under no condition will DOCOMO be held and cause malfunction. liable for any damaged or lost data saved in the ･ Do not rub or scratch the display with terminal. ･ Do not drop or give a strong impact to metal. the terminal. The display may get scratched and it may cause malfunction or damage. Doing so may cause malfunction or damage. ･ Make sure to see the user's manuals ･ Do not plug the connector of the external supplied with the battery pack and AC device into the microUSB connection adapter cable. jack or headset connection jack at the slant or pull it while connecting. Doing so may cause malfunction or damage.

Contents/Precautions 19 Continued on next page ･ The terminal could become warm while ･ Do not bring strong magnetic objects in use and charging. This condition is close to the terminal. not abnormal. You can continue Strong magnetic objects may cause charging the battery. misoperation. ･ Do not leave the camera under direct ■ Battery pack precautions sunlight. ･ The battery pack is a consumable If you do so, some of the elements may melt or accessory. become faded. Even if the operating time of the terminal varies ･ Do not use the terminal without the back depending on the operating conditions and cover. other factors, when the length of time you can Doing so may cause the battery pack fall, use the terminal with a fully charged battery malfunction, and damage. becomes unusually short, it is time to replace ･ Do not put extreme thick stickers etc. on the battery pack. Purchase the battery pack the keypad side. specified in this manual. Doing so may cause malfunction, damage or ･ Charge the battery pack in an erroneous operation. environment with the proper ambient ･ Do not put labels or stickers on the back temperature (5°C to 35°C). side of the display. ･ The operating time of the battery pack Label or sticker may be hooked when opening/ varies depending on the operating closing the terminal and may cause environment and the secular malfunction or damage. degradation level of the battery pack. ･ Do not remove the microSD card or power off the terminal while using the ･ Depending on the use condition, the battery pack may be inflated as it comes microSD card. Doing so may cause data loss or malfunction. to the end of its life. This is not a ･ Do not let magnetic cards, etc. come malfunction. close to the terminal. The magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.

Contents/Precautions 20 Continued on next page ･ Do not store the battery pack in the ■ UIM precautions following cases: ･ Do not use unnecessary force to insert/ - The battery is fully charged (immediately remove the UIM. after the charging is complete) ･ Do not insert and use the UIM with - The battery has run out (the phone cannot another IC card reader/writer. Please power on) The performance and life of the battery pack note that you are wholly liable for any may deteriorate. damage or malfunction as a result of It is recommended that you store the battery such action. pack with the remaining battery level of about ･ Always keep the IC portion clean when 40 percent as a guide. you use the card. ■ AC adapter cable precautions ･ Clean the terminal with a dry soft cloth ･ Charge the battery pack in an (such as used for cleaning eyeglasses). environment with the proper ambient ･ Note down the information saved in the temperature (5°C to 35°C). UIM in a separate note and keep it ･ Do not charge in the following places. safely. - Places that are very humid, dusty or exposed Under no condition will DOCOMO be held to strong vibrations. liable for any damaged or lost data saved in the - Near ordinary phone or TV/radio. terminal. ･ The AC adapter cable could become ･ Take an expended UIM to sales outlet warm while charging. This condition is such as docomo Shop for proper not abnormal. You can continue using disposal in order to protect the the terminal. environment. ･ When you use the power outlet with a ･ Do not carelessly damage, contact, or mechanism to prevent the plug from short-circuit an IC. being removed, follow the instructions Doing so may cause data loss or malfunction. Do not drop a UIM or subject it to on the outlet's user's manual. ･ impact. ･ Do not give a strong impact to the Doing so may cause malfunction. adapter. Also, do not bend or deform the ･ Do not bend a UIM or place a heavy microUSB plug. object on it. Doing so may cause malfunction. Doing so may cause malfunction.

Contents/Precautions 21 Continued on next page ･ Do not insert the UIM on which any label 1: The estimated interference distance is 10 m or seal is stuck into the terminal. or less. Doing so may cause malfunction. 4: The estimated interference distance is 40 m or less. ■ Bluetooth function precautions 8: The estimated interference distance is 80 m ･ To secure the Bluetooth communication or less. security, the terminal supports the : The full band between 2400 MHz and 2483.5 MHz is used and the security function compliant with band of the mobile identification Bluetooth standards, but the security device can be avoided. may not be sufficient depending on the Available channels vary depending on the setting. country. Concern about the communication For use in an aircraft, contact the airline beforehand. using the Bluetooth function. ･ Bluetooth cautions Please be aware that DOCOMO is not ･ The operating frequency band of the terminal is responsible for data leak when making used by industrial, scientific, consumer and data communications using Bluetooth. medical equipment including microwave ･ You can use a headset, handsfree, and ovens, premises radio stations for identifying audio profiles on the terminal. The audio/ mobile units used in the manufacturing lines of plants (radio stations requiring a license), video remote control may be available specified low power radio stations (radio for audio profile. (only compatible stations requiring no license) and amateur Bluetooth devices) radio stations (hereinafter referred to as ･ Frequency band "another station"). The frequency band used by the terminal's 1. Before using the terminal, confirm that Bluetooth/wireless LAN function is indicated on "another station" is not being operated the battery storage section. The following are nearby. the descriptions: 2. In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by 2.4: This radio equipment uses the 2400 MHz turning off the power, etc. band. 3. If you have further questions, contact FH/DS/OF: Modulation scheme is the FH-SS, "General Inquiries" on the last page of this DS-SS, or OFDM system. manual.

Contents/Precautions 22 ■ Wireless LAN (WLAN) precautions ･ 2.4 GHz device cautions ･ Wireless LAN (WLAN) exchanges The operating frequency band of the WLAN information using radio waves, and device is used by industrial, scientific, allows you to freely establish LAN consumer and medical equipment including home electric appliances such as microwave connection if you are within an area ovens, premises radio stations for identifying where radio wave reaches On the other mobile units used in the manufacturing lines of side, if you communicate without plants (radio stations requiring a license), appropriate security settings, specified low power radio stations (radio communications may be intercepted or stations requiring no license) and amateur radio stations (radio stations requiring a hacked by malicious parties. It is license). recommended to make necessary 1. Before using the device, confirm that security settings on your responsibility premises radio stations for identifying and expense. mobile units, specified low power radio ･ Wireless LAN stations and amateur radio stations are not being operated nearby. Do not use wireless LAN near magnetic 2. If the device causes harmful radio devices such as electrical appliances or AV/OA interference to premises radio stations for devices, or in radio waves. identifying mobile units, immediately change - Magnetism or radio waves may increase the frequency band or stop use, and contact noises or disable communications "General Inquiries" on the last page of this (especially when using a microwave oven). manual for crosstalk avoidance, etc. (e.g. - When used near TV, radio, etc., reception partition setup). interference may occur, or channels on the 3. If the device causes radio interference to TV screen may be disturbed. specified low power radio stations or - If there are multiple wireless LAN access amateur radio stations, contact "General points nearby and the same channel is used, Inquiries" on the last page of this manual. search may not work correctly.

Contents/Precautions 23 ■ Cautions ･ Do not use an altered terminal. Using an altered device is a violation of the Radio Law. A "Technical Conformity Mark " affixed on the manufacturer's specification sticker certifies that the terminal meets technical regulations for specified radio equipment that are based on the Radio Law. If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid. Do not use the terminal with the certification invalid, as it is a violation of the Radio Law. ･ Be careful when using the terminal while driving. Using a handheld mobile phone while driving will result in a penalty. However, absolutely necessary cases such as rescue of a sick person or maintaining public's safety are exempted. ･ Do not change basic software maliciously. Repair may be refused due to modification of the software.

Contents/Precautions 24 Part names and functions Before Using the Handset Using Before

defghi o p q a bc r

x s y t z A j

u B v

w C k l m n

a microUSB connecting terminal i Frontcamera lens b Headset connector j Display (Touch panel) c HDMI connector (type D) k x Back key d Notification LED Returns to the previous screen. Notifies charging condition, missed call or unread l y Home key mail. Displays home screen. e Proximity sensor m Microphone Turns on or off the touch screen to prevent Transmits your voice to the other caller. erroneous operation during a call. n t Menu key f Light sensor Displays menu according to the operating Adjusts screen brightness. Do not cover it with conditions. your fingers etc. o Speaker g Ear speaker p Camera lens Allows you to hear the other party's voice etc. q Second Microphone during a call. Reduces noise to make easy to listen. h Infrared port r GPS/Bluetooth£/Wi-Fi antenna*1 Sends and receives data via infrared communication. Before Using the Handset 25 Continued on next page s p Power key/Screen lock key ■ Game keypad Turns on/off power. Also, turns off the backlight Slide the game keypad to use the and sets key lock. following game buttons. t Whip antenna Extend it when watching TV (1Seg). It has no influence on calls or data communication if you extend the whip antenna when calling or using browser. u m Volume key/Zoom key v k Camera key Hold it down for at least one second to activate Camera. Use it as a shutter to take photos or movies. w Built in antenna*2 x microSD memory card slot y FeliCaTM mark Hold it over card reader/writer when using Osaifu- Keitai£. a z Flash/Photo light Direction keys (move the cursor up/down/left/ Lights to brighten an object when taking a right) b photograph. Menu button c A au IC-Card slot Touch pad L d B Charge terminal Touch pad R e C Strap hole Select button f *1 Do not cover the antenna area with your hand Start button g when using Wi-Fi, Bluetooth£ or retrieve GPS × button h information. ○ button i *2 Do not cover the antenna area with your hand △ button j during a call or when using the browser. □ button k R button l L button * cdefijkl are dedicated buttons for games. For details on how to use each button in games, see the user's manual of each game. * Operating, selecting setting items are available by using the game keypad. Some items cannot be operated or selected.

Before Using the Handset 26 UIM Inserting UIM Put your tips of the third and fourth The UIM is an IC card recorded user 1 fingers (nails) into the groove, hold information such as your phone number etc. the back cover up in the direction When the UIM is not inserted to the terminal, of the arrow ( ) to remove. you cannot use some functions (phone function, etc.) of the terminal. ･ In this terminal, the UIM (blue) is not available. If you have the UIM (blue), bring it to the nearest docomo Shop to replace. ･ When inserting/removing the UIM, make sure to power off the terminal and remove the back cover. Do not connect the AC Adapter cable.

■ Security codes of the UIM The UIM has a Security code, namely 2 Insert straight the UIM all the way PIN. It is set "0000" at the subscription. into the holder with the metal part They can be changed by yourself. (P.109) (IC) facing down. ･ Insert it with the corner cut back side.

Before Using the Handset 27 ❖Information Removing UIM ･ Make sure to attach the back cover before using. Remove the back cover, press the The microSD card cannot be recognized if the back cover is not attached. 1 UIM with your fingertip and remove ･ Do not touch the back cover detect switch. It may it sliding outside. cause malfunction or damage.

Inserting microSD card 1 Remove the back cover (P.27). Make sure the inserting direction 2 and insert straight the microSD card all the way into the holder ❖Information untill it clicks. ･ Please be careful not to touch or scratch a metal part (IC) when you handle the UIM. Doing so may ･ Insert the microSD card with metal cause malfunction or damage. contacts side down.

microSD card

You can use microSD card for any other compatible devices. ･ When a microSD card is not inserted, camera functions, playing or downloading music or videos, communications using the Bluetooth function, etc. are not available. ･ The terminal supports microSD card of up to 2GB, and microSDHC card of up to 32GB (As of October, 2011).

Before Using the Handset 28 Removing microSD card Charging Remove the back cover (P.27). The battery pack is not full charged when you 1 ･ If the back cover is removed, " SD purchased the terminal. card safe to remove" appears on the status bar. Make sure that the microSD card is unmounted then Charging time remove the microSD card. Charging time is an estimate of the time Insert the microSD card straight required to charge a completely empty 2 into the slot all the way until it battery pack. Charging under low clicks. temperature requires longer time. Pull out microSD card slowly. AC Adapter Cable SO03 Approx. 200 min. 3 ･ The icon in the status bar changes to (included accessory) to notify that microSD card is removed. Operation time on full charge (estimate) The following time varies by the battery condition or operating environment. For details, see (P.204).

Continuous FOMA/3G Stationary (Auto): stand-by time Approx. 480 hours Moving (Auto): Approx. 330 hours Moving (3G static): Approx. 440 hours GSM Approx. 300 hours (stationary) Continuous call FOMA/3G Approx. 340 min. time GSM Approx. 450 min.

Before Using the Handset 29 ･ When charging starts, the notification LED Battery pack life turns on in red/orange/green. Green means ･ The battery pack is a consumable the remaining battery level reaches more accessory. The usage duration of the than 90%. To check the battery level, press battery per one charge decreases gradually t from the Home screen, then tap each time the battery is recharged. [Settings] X [About phone] X [Status] and ･ When the usage duration per one charge check "Battery level". When charging is becomes about half of a new battery pack, completed, "100%" is displayed in the the life if the battery pack is assumed to be battery level. almost over. It is recommended that you ･ When you start charging the battery with the replace the battery pack ahead of time. terminal powered off, the power turns on. Depending on the usage condition, the However, you cannot operate the terminal. battery pack may be inflated as it comes to Do not charge the battery in a place where be end of its life. This is not a malfunction. the use is prohibited such as in airplane or ･ Return all spent battery packs to hospital. NTT DOCOMO or a dealer, or a Li-ion 00 recycling shop to protect the Do not charge the battery pack for environment. a long time (several days) ･ If you remain charging the terminal for a Charging long time, the power supply starts from the ･ Make sure to charge with the Battery pack battery pack after completion of charging. S004 designed for the SO-03D attached. The usage time duration may be short. In ･ The included AC adapter's power plug is that case, please charge it again correctly. compatible with AC100V to 240V. For using For recharging, remove the terminal from the terminal overseas, a plug adapter that the AC Adapter cable and reconnect it fits the electrical outlets in the country you again. stay is needed. Do not use an electrical transformer for overseas use to charge the terminal. ･ Use the included AC Adapter cable for charging.

Before Using the Handset 30 Check the direction of the back Attaching the battery pack 3 cover, and attach to the terminal ･ When attaching/removing the battery pack, body ( ), press each part make sure to power off the terminal. marked as shown and make sure that there are not any spaces Remove the back cover (P.27). 1 between the body and cover ( ). Check the orientation of charging ･ When attaching the back cover, be 2 jack of the battery pack, insert it in aware not to get your finger caught in the direction of the arrow ( ) the protrusion of the back cover rim. aligning the notches of the terminal and battery pack.

Before Using the Handset 31 Insert the microUSB cable Removing the battery pack 2 horizontally with the USB plug Remove the back cover, put your engraved side facing up into the 1 tip of thumb (nail) under the connector for USB of the AC battery pack from the groove of the Adapter, and insert the AC Adapter terminal, hold the battery pack up plug to the power outlet. in the direction of the arrow ( ) to When the charging is completed, remove. 3 remove the microUSB plug of the microUSB cable from the terminal. Remove the AC Adapter from the 4 power outlet.

❖Note ･ If the microUSB cable is connected into the connector for external devices for charging etc, the terminal is automatically powered on. Be careful not to connect the microUSB cable in a place where the use is prohibited such as in airplane or hospital. Charging with the AC Adapter Charging with a PC 1 Insert the supplied microUSB cable horizontally with the 1 Insert the microUSB cable microUSB plug engraved side horizontally with the microUSB facing up into the connector for plug engraved side facing up USB cable of the terminal. into the connector for USB cable of the terminal.

Before Using the Handset 32 Continued on next page Insert the USB plug of the ill 2 microUSB cable horizontally into the USB port of a PC. ･ When "PC Companion software" screen appears on the terminal, tap [Skip]. ･ When a screen for new hardware detection etc. appears on the PC, select [Cancel]. When the charging is completed, 3 remove the microUSB plug of the microUSB cable from the terminal. Remove the USB plug of the 4 microUSB cable from the USB port of the PC.

❖Note ･ If the microUSB cable is connected into the USB connection jack for charging etc, the terminal is automatically powered on although the operations are not available. Be careful not to connect the microUSB cable in a place where the use is prohibited such as in airplane or hospital. ･ Check the connecting direction to connect correctly. Wrong connection may cause damage.

Before Using the Handset 33 Turning power on and off Turning power off 1 Press p for over a second. Turning power on ･ Phone options menu appears. 1 Press p for over a second. 2 Tap [Power off]. ･ The key unlock screen appears. 3 Tap [OK].

Setting Key lock When the key lock is set, the screen light turns off. You can avoid the touch screen or button from false operations. ･ The terminal keys are locked with turning the screen light off after the specified time duration. 1 Press p. 2 Deactivate the key lock. ･ For deactivating the key lock, see ❖Information "Unlocking the keys" (P.35). ･ For details on settings for turning the backlight off and the duration of time before the key lock ❖Information activation, see "Adjusting the idle time before the ･ The first time you turn ON, "Setup guide" (P.35) screen turns off" (P.106). appears. ･ There is no function to deactivate the key lock. ･ If you activate the screen lock (P.109) or SIM card ･ If you set the screen lock, entering the pattern, PIN lock (P.108), a PIN code entry screen appears or password is needed before the screen unlock. when turning power on. Enter the PIN code and For details on the screen lock settings, see "Screen tap [OK]. To correct the wrong PIN entry, tap / lock" (P.109). .

Before Using the Handset 34 Press p for over a second. Unlocking the keys 1 ･ A screen for selecting language A key unlocking screen appears when appears. turning the power on or the backlight on by Tap [English (United States)] X p y pressing / . 2 [Done]. Touch and drag to until ･ "Welcome!" screen appears. You can 1 it laps over. check the operations of functions and make initial settings. Tap . 3 ･ The Internet connection screen Key lock appears. Tap [Mobile network or Wi- ❖Information Fi] or [Wi-Fi only] to select. ･ appears on the right until you touch . You Tap . can switch the ringtone ON/OFF without unlocking 4 ･ The wireless network screen appears. the keys and screen by touching and dragging to the left. Tap [Search for networks] to add Wi-Fi network. Tap . Initial settings (Setup guide) 5 ･ The Services screen appears. Make settings of "Google (P.114)" When you turn on the terminal for the first "Facebook (P.115)" "Exchange time, Setup guide appears to set up the ActiveSync (P.124)". display language, wireless network, online services, etc. and to import contacts. 6 Tap . ❖ ･ Automatic synchronization screen Information appears. Tap [Synchronize You can set or change the items later as required. ･ automatically] or [No thank you] to To change the settings later, from the Home screen, tap , then tap [Settings] or [Setup select. guide] to set up from the menu.

Before Using the Handset 35 Continued on next page Tap . ❖Note 7 ･ The import contacts screen appears. ･ If you cancel the "status bar" of application forcibly If you have contacts saved in the UIM, (P.112), operations may not be performed correctly. from the Home screen, tap X Tap [Contacts] then [Import] in "Import contacts" on the contacts import Status icons screen X Tap [SIM card]/[Memory The main status icons displayed on the card] to select "account" X Select screen are as follows. "contacts to be imported". Signal strength Connecting to Tap X [Finish]. Bluetooth device 8 The Home screen appears. ･ During International Postioning with GPS ❖Information roaming ･ Make sure to check if the data connection is No signal During Data available (3G/GPRS) before setup online services. synchronization For checking the data connection status, see FOMA HIGH- Airplane mode "Status icons" (P.36). SPEED available activated Sending and Silent mode downloading via (vibration) ON Status bar FOMA HIGH- SPEED A status bar appears at the top of the screen. GPRS available Sound OFF In the status bar, the terminal status and (Ringtone volume 0) notification are displayed. Notification icons Sending and Speakerphone ON appear on the left side, and the terminal downloading GPRS status icons appear on the right side of the data status bar. 3G available Microphone set to mute Sending and Alarm is set. downloading 3G data Status bar Connecting to Wi-Fi Battery status

Before Using the Handset 36 Continued on next page Connecting to Wi-Fi The battery is microSD card Media server using AutoIP charging. unmounted activated in function (disabled reading Connected devices The Bluetooth UIM is locked or not and writing), ready function is ON. inserted. to remove microSD card Media server removed connection request Notification icons notification in Connected devices The main notification icons displayed on the Bluetooth Red: Error screen are as follows. connection request messages notification Yellow: Warning New email Missed call messages message Installation is Problem with sync New Gmail New voice mail completed (when message installing New SMS message Upcoming calendar applications from event Android Market, etc). Problem with SMS Playing a track Software update Setup guide message delivery notification or unchecked New instant USB connected updating software message Update notification More (undisplayed) New Facebook Data (when update of the notifications message communication installed market invalid application is Uploading data to New Area Mail notified) Facebook Outgoing, Setting Wi-Fi Uploading data to Wi-Fi open network receiving, or calling tethering Facebook available Calling with Setting USB completed Bluetooth device tethering Receiving/ Connecting to a Call on hold Setting Wi-Fi Downloading data VPN tethering/USB Sending/Uploading Not connected to a tethering data VPN

Before Using the Handset 37 ❖Information Notification panel ･ Some notifications cannot be cleared.

Notification icons are displayed in the Notification panel. You can open notifications, Notification LED such as messages, remainders, or event notifications directly from the Notification Notification LED provides information on the panel. terminal status, incoming/receiving, etc.

Opening/Closing the LED status Notification panel Status Indication Red The battery is charging when the remaining battery level is Notification panel less than 10 %. Flashing red The battery level is not enough for activating the terminal for turning ON. Green The battery is charging when the remaining battery level is more than 90 %. Flashing green While backlight is off, missed calls/incoming messages (SMS)/new email messages Drag the status bar downwards. exist. 1 ･ Press x to close the Notification Flashing white A call is received. panel. Flashing blue Received sp-mode mails while backlight is off exist. Orange The battery is charging when Clearing the Notification panel the remaining battery level is From the Notification panel, tap 11 % - 89 %. 1 [Clear].

Before Using the Handset 38 s Google ･ Display entry screen for the Basic operations Search search box to search information in the terminal or on the Internet. (P.47) Basic hardware key operation * In this manual, each key operation is described with x, y, t, s.

Using the touch screen Precautions on using touch screen ･ Touch screen is designed for being touched lightly with fingers. Do not push it forcibly x Back ･ Go back to the previous screen. with a finger or press it with sharp objects Or close a dialog box, options (nail, ballpoint pen, pin, etc.). menu, or the Notifications panel. ･ Touching the touch screen may not work in ･ Close the software keyboard. the following cases. Note that it may cause y Home ･ Go to the Home screen. malfunction. ･ Press and hold down for over a - Operation with gloved hands second to open a list of recently used applications. - Operation with tip of fingernail t Menu ･ Open a list of options available - Operation with foreign object on the in the Home screen or screen application. - Operation with protective sheet or seal on ･ Touch and hold for 1 second or the screen more when entering characters switches display/not display the software keyboard. ･ From the Home screen, touch and hold for 1 second or more to display the software keyboard. Tap any key to start Google Search.

Before Using the Handset 39 Operations on the touch screen ■ Pinch Touch the screen with two fingers and ■ Tap widen (pinch-out) or narrow (pinch-in) the Touch an item such as icon or menu with fingers' distance. your finger lightly and release it. On some screens, pinch-out to zoom in ･ Double-tap means tapping twice and pinch-in to zoom out. quickly.

■ Touch Touch and hold an icon or menu item long.

■ Flick Stroke the screen with your finger lightly and flick up/down/left/right. Flick operation is used to switch or scroll the screen.

❖Information ･ You can zoom in or out also by double-tapping or by tapping the zoom control icons ( / ). The zoom control icons may appear when you drag in any direction on the screen.

■ Drag Touch the screen, drag to the desired position and release the finger.

Before Using the Handset 40 Selecting items quickly from a Marking or unmarking options list You can switch ON/OFF of the option settings Some lists have Japanese syllabary and by marking or unmarking the checkboxes or alphabetic index on the right side of the radio buttons. screen. ･ To switch ON/OFF of the option setting, tap ･ Drag your finger along the index to scroll the checkbox or radio button. through the list. ■ Checkboxes

Marked Unmarked

■ Radio buttons

Marked Unmarked

･ Tap the index character to move on the list.

Before Using the Handset 41 Home screen

The Home screen consists of 5 screens: the center screen and 2 auxiliary screens on right and left. The center screen is the starting point of the terminal operation. You can personalize the Home screen by adding or moving, for example, application shortcuts and widgets, or changing the wallpaper.

a b c d e f g

h i j i i k l i i m a Widget: (From the left) ON/OFF: Wi-Fi, ON/OFF: Bluetooth, ON/OFF: Sound, ON/OFF: Backlight b Widget: PlayStation®pocket (Large) c Widget: Google search (P.47) d Home screen position: Show your current position of 5 home screens. e Widget: Digital clock f Widget: Music player g Widget: Photos and videos h Media folder (Gallery, Music, Camera) i Shortcuts (applications) j Wallpaper k Widget: Get games l Widget: TimescapeTM m Application button

Before Using the Handset 42 Adding a shortcut on the Home Switching the Home screen screen 1 Flick the Home screen to left or right. 1 In "Add to home screen" menu, tap ･ The Home screen switches. [Shortcuts].

❖Information Select a shortcut you want to add. 2 The shortcut appears on the Home ･ You can check the current position of the Home ･ screen with at the top of the screen. screen. ❖Information Changing the Home screen ･ You can add shortcuts of applications on the Home screen also by the following operation. 1 From the Home screen, press - From the Home screen, tap , touch and hold t. down an icon until the Home screen appears and release the finger where you want to place Tap [Add]. the shortcut. 2 ･ "Add to home screen" menu appears to change the Home screen. Adding widgets ■ Add to home screen 1 In "Add to home screen" menu, tap Shortcuts Add shortcuts of applications or [Widgets]. setting screens. (P.43) ･ A list of widgets appears. Widgets Add widgets. (P.43) Analog clock Display the analog clock. Folder Add folders to collect shortcuts, Calendar Display the calendar. etc. (P.45) Data traffic Switch ON/OFF of data Wallpapers Change the wallpaper. (P.46) communication. Themes Change the theme. (P.46) Digital clock Display the digital clock. Facebook View comments of members. ❖ Information Favorites and Display contacts registered to ･ "Add to home screen" appears also by touching call log Favorites and related call log. and holding anywhere on the Home screen without Friends' games Sign in Facebook to acquire or icons. & applications check information on applications friends use.

Before Using the Handset 43 Continued on next page Friends' music Display lists of videos or music On/Off: Wi-Fi Switch on/off Wi-Fi function & videos tracks shared on Facebook. Photos and Display photos and videos stored FUN& Display a list of games you can videos on the microSD card. TM downloads play with Xperia PLAY. (Get Picture frame Crop the shot photo to display on mini/normal games) the Home screen. Google Search Display the Quick search box. PlayStation® Display the contents and tab Home screen Display tips of the Home screen pocket (Large) information of tips operation. PlayStation®pocket. Latitude View locations of members. PlayStation® Display the contents of ® LiveWareTM Set to automatically activate pocket (Small) PlayStation pocket. manager selected application when you Rate Places Display information of nearby connect Stereo Headset with stores or post word of mouth. Microphone (sample) or Status switch Display the battery level (%), commercially available stereo setting buttons for turning on earphone set, or connect to Airplane mode, Bluetooth charge with microUSB cable and function, GPS function, Wi-Fi AC adapter. function, and for switching Market Display recommended speakerphone ON, vibrate, and applications of Android Market. Mobile network settings. Media Display Music player and Gallery Timer Display Timer. shortcuts (photos, videos). TimescapeTM Display the latest Timescape tile. Music player Display Music player. Widget News & Display news and weather. TrackIDTM Display TrackID. Weather Traffic Enter widget name and On/Off: Turn on/off the backlight. destination to display time Backlight required to go to the destination On/Off: Switch on/off Bluetooth function from the current location and Bluetooth widget. Tap the widget to check the traffic information provided. On/Off:GPS Switch on/off GPS function Twitter (large) View comments of members with On/Off: Display setting buttons for mobile entry screen. Roaming network setting. Twitter (small) View comments of members. On/Off: Sound Switch between speaker on and vibrate.

Before Using the Handset 44 Continued on next page Weather widget View weather in the specified Adding a folder to the Home area. screen World clock Select time zones to display date and time of up to 3 cities in the In "Add to home screen" menu, tap world. 1 [Folder]. YouTube Display the list of frequently Tap [Done]. played movies and 2 recommended. ･ The folder appears on the Home screen. Select an item. ･ To change the folder name, tap 2 [Create new folder] entry box. ❖Information Adding items to a folder ･ If you install an application with widget from Android Market, the installed widget is added to From the Home screen, touch and the widget list. 1 hold a shortcut icon until the Displaying widget on the Home terminal vibrates. screen by a list Drag the shortcut icon over to the 2 folder. From the Home screen, pinch-in. 1 ･ A list of the widgets on the Home Release your finger from the icon. screen appears. 3 ･ The shortcut is added in a folder. ❖ Information Renaming a folder ･ To return to the Home screen, pinch-out or tap [Exit overview] or press x. 1 Tap the folder to open it. Tap the title bar of the folder. 2 ･ A dialog box for changing folder settings appears. Tap entry box of [Folder name] and 3 enter a folder name, and tap [Done].

Before Using the Handset 45 Changing wallpaper ❖Information ･ Alternatively, you can change theme from the In "Add to home screen" menu, tap Home screen, press t and tap [Theme], or 1 [Wallpapers]. from the Home screen, press t and tap [Settings] X [Display] X [Theme]. Tap [Gallery]/[Live wallpapers]/ 2 [Sony Ericsson wallpapers]. ･ When you tap [Gallery], select an Moving an icon on the Home image to set to the wallpaper, pinch screen the cropping frame or drag it to area From the Home screen, touch and you want to use as wallpaper, and tap 1 hold an icon until the terminal [Save]. vibrates. ･ When you tap [Live wallpapers], select a content, tap [Set wallpaper]. 2 Keep touching the icon and drag it. You can also download and add Live ･ To move to another Home screen, wallpaper content from a web page. keep touching the icon and drag to left or right. ･ When you tap [Sony Ericsson wallpapers], select an image to set to Release your finger from the icon. the wallpaper, tap [Set wallpaper]. 3

❖Information Deleting an icon from the Home ･ From the Home screen, you can also press t screen and tap [Wallpaper]. From the Home screen, touch and Changing the theme 1 hold an icon until appears at Set the background image for the Home the bottom of the screen. screen or settings menu from themes. 2 Drag the icon to . 1 From "Add to home screen" menu, ･ The icon turns in red. tap [Themes]. 3 Release your finger from the icon. Select a theme you want to 2 change.

Before Using the Handset 46 ･ If you have set a Facebook account Sharing shortcuts and widgets and Facebook inside XperiaTM on the Home screen account, the posting screen for You can send application shortcuts and Facebook appears in Step 2 to post widgets on the Home screen to someone with on Facebook. You can select send an easy operation. You can send/post method by tapping "Other sharing download information (URL) of applications options". or widgets you found without entering ❖Information manually. ･ Some applications and widgets cannot be shared. Touch and hold a shortcut or ･ You cannot share them unless UIM is inserted. 1 widget on the Home screen. ･ "Share" appears in the status bar area. Searching information in Drag the shortcut or widget to the terminal and web pages 2 "Share" without lifting your finger. ･ A selection screen for sending Enter a word in the search box to browse the method appears. information in the terminal or on the Internet. Select a sending method Tap the search box (P.42 c) on the 3 (Bluetooth/Facebook/Gmail/ 1 Home screen. Twitter/message) to send. ･ The software keyboard appears. ･ For details on the sending methods, Enter a search word. see "Using Bluetooth function" (P.143), 2 ･ Search suggestions appear as you "Using Gmail" (P.131), "Sending enter a character. message (SMS)" (P.122). To post on ･ For character entry, see "Character Facebook or Twitter, set up each entry" (P.56). account referring "Setting Facebook account" (P.115) in advance to show 3 Tap a search item or . the posting screen. ･ To enter a search word again, press x.

Before Using the Handset 47 Continued on next page ❖ Information Searchable You can change the search ･ Alternatively, from the Home screen, tap , then items range by marking/unmarking tap [Search] to display search screen. data categories (web, twitter, ･ Tap at the left of the search box to set the Apps, Music, Messaging, search range from "All", "Web" and "Apps". Contacts, Voice search) in the ･ Tap at the right of the search box to enter a terminal to search. search word by voice to browse the Internet. Clear shortcuts You can set not to display recently selected search results. Search settings You can set search engines to use for Quick search box or set search objectives in the Applications screen terminal. You can access the applications installed in Tap the search box (P.42 c) on the the terminal using the Applications screen. 1 Home screen. Press t, then tap [Search Displaying applications screen 2 settings]. ･ A search settings screen appears. You can set the following items.

Google search You can set whether to display search options when a search Application button word is entered, or whether to reflect the previous search result From the Home screen, tap . in the search options. You can 1 ･ On the Applications screen, flick left also open the web search log or right to switch the Applications settings page by Browser. screen. ･ You need to create your Google account. ❖Information ･ To close the Applications screen, tap or press x or y.

Before Using the Handset 48 Applications The applications displayed on the Applications screen by default are as follows. ･ Some applications require separate subscriptions (charged) to use.

Icon Application Description Page ｉチャネル An application to use i-Channel - (i-Channel) Koe-no-Takuhaibin Use "Koe-no-Takuhaibin" easily and conveniently on the - smartphone. You can record and play voice messages with a simple operation. melodycall An application for using melodycall - BOOKストア2Dfacto BOOKストア2DFacto is an electronic book store where you can - (BOOK Store 2Dfacto) buy to view e-books in many categories such as serious novels, popular comics, hot business books, etc. Contacts Keep contacts of your friends and colleagues. P.76 Phone Make and receive calls, and switch between calls. P.71 Messaging Send and receive messages (SMS). P.122 Browser Browse Web and WAP sites (except for WML) and download P. 13 3 files. TimescapeTM View Social Network Service (SNS), missed calls, message P. 17 0 (SMS) history. You can make a call, send a message, etc. from the history. Settings Make the terminal settings. P.93 Setup guide Display Setup guide. P.35 Music Playback music data stored on a microSD card. P.165 Gallery View photos and videos you took, and images posted on Picasa P. 16 0 or Facebook. Alarms Set an alarm. P.182

Before Using the Handset 49 Continued on next page Icon Application Description Page Camera Take photos and record video clips. P.150 Email Send and receive emails (multiple accounts are also available). P.124 Market Access to the Android Market, download and buy new P. 16 8 applications. Facebook Activate Facebook client application. P.115 Calendar Display a calendar and manage schedule. P.179 Video Unlimited Connect to Video Unlimited to download favorite videos onto the P. 18 5 terminal. you can enjoy watching them at any place. Maps Use Google map services, such as viewing current location, P. 17 6 finding another location and calculating routes. Gmail Send and receive mails from/to a Google account. P.131 Talk Chat with friends using Google Talk instant messaging. P.131 Navigation Display Google map navigation to receive detailed guides for P. 17 8 your destination. Places Use various information registered on Google map, such as P. 17 7 shops around the current location. Latitude Check and share the location information of specified friends. P.179 Calculator Perform basic calculations such as addition, subtraction, - multiplication, and division. TrackIDTM Use a service to check information on the currently played music. P. 16 8 YouTube Playback videos around the world or upload recorded videos. P.163 Area Mail Receive early warning "Area Mail" and view received Area Mail. P.132 みんなのGOLF(R)2 A game you can play with PlayStation®pocket. P.148 (EVERYBODY'S GOLF 2)

Before Using the Handset 50 Continued on next page Icon Application Description Page SE Store Display website introducing accessories for terminals. P.184 News & Weather Receive current location information to display weather forecast - or view news in categories. Downloads Display a list of downloaded items. P.112 PlayNow Access to PlayNow website to browse a variety of beneficial P. 18 4 information. Instruction Manual Display the terminal instruction manual. You can start a function P. 2 you want to use from the explanation. Asphalt 6 A game you can play with XperiaTM PLAY. P.148 Google Search Search information in the terminal and web pages from P. 47 keywords. Connected devices Set up and manage Media server in Connected devices. P.147 PlayNow Game Connect to the game information page in the PlayNow website. - Clock Display clock and set an alarm, etc. P.181 docomo market Access to the docomo market in which you can search P. 16 9 applications and videos. APPNAVI Introduce applications for Android terminals. You can search - applications from categories, rankings, etc. 定型文 (Fixed phrase) Adding phrases, editing phrases such as changing, deleting are P. 69 available. PhoneBookCopy Move or copy contacts data by using external storage media P. 84 such as a microSD card. Bruce Lee Dragon A game you can play with XperiaTM PLAY. P.148 Warrior Music & Videos Display lists of videos or music tracks shared on Facebook. P.183 PlayStation®pocket Display a list of games you can play with PlayStation®pocket to P. 14 9 buy, download, play some.

Before Using the Handset 51 Continued on next page Icon Application Description Page Get games Display a list of games you can play with XperiaTM PLAY to buy, P. 14 8 download some. OfficeSuite Browse and read Office documents. P.183 XperiaTM PLAY Display a list of games you can play with XperiaTM PLAY to buy, P. 14 8 download, play some. Voice Search Use Google search by voice input. P.47 SE Home Website for smartphones where products of Sony Ericsson and - the campaign information are provided. Update center Acquire latest software and applications from the website of P. 20 1 Sony Ericsson. Star Battalion HD A game you can play with XperiaTM PLAY. P.148 Games & apps Sign in Facebook to acquire or check information on P. 18 3 applications friends use. クラッシュ・ A game you can play with PlayStation®pocket. P.148 バンディクー ® (Crash Bandicoot) mora touch Access to mora touch, the music download site. P.184 LiveWareTM manager Set to automatically activate selected application when you - connect Stereo Headset with Microphone (sample) or commercially available stereo earphone set, or connect to charge with microUSB cable and AC adapter. BeeTV A broadcasting station for mobile terminals. You can watch - programs such as original dramas, music, variety shows. Phonebook backup Contacts data can be backed up automatically and regularly to - the contacts backup center. Data can be restored when you lose the terminal or delete data by mistake. ecoモード An application to set eco mode which reduces battery - (eco mode) consumption by adjusting terminal setting such as screen brightness.

Before Using the Handset 52 Continued on next page Icon Application Description Page Evernote Launcher Save various information such as website contents, shot images, - idea memos to the server to search/view at any time you want it. Saving or viewing information can be available not only from the terminal but also PC or other devices. 書籍・コミック View high-profile electronic books, electronic comics, etc. - E★エブリスタ ranged from original works by professional authors/famous (Books, comics people to general user posted popular works. E★EVERYSTAR) 地図アプリ Functions such as 地図(Map), お店や施設検索(Shop and facility - (Map application) search), ナビ(Navigation), 乗換(Transfer function), 訪れた街 (Visited places) support your outing. マクドナルド You can use McDonald's coupons and shop search function. - (McDonald's) Mobage An application to enjoy contents produced by Mobage. - PS Storeを始めよう Display website featuring "PS Store". Download games and enjoy - (Let's start PS Store) them with the terminal. 楽天オークション An application to place or take bid on the Rakuten auction. - (Rakuten auction) ドコモ海外利用 Support using packet communications overseas. Data roaming - (International setting or network operator settings when using Global Pake- roaming) hodai (flat rate service for packet communication overseas) can be easily made. spモードメール Send/Receive mails using DOCOMO mail address P. 12 2 (sp-mode mail) (@docomo.ne.jp). You can use pictogram and Deco-mail. Mails can be received automatically. ToruCa Acquire, display, search, and update ToruCa. P.184 Twitter Twitter official client application - Twonky Special An application to connect home appliances and the terminal. - You can play back videos, pictures, music on the terminal or web with TV or audio system wirelessly connected.

Before Using the Handset 53 Continued on next page Icon Application Description Page Gガイド番組表 (G View ground-based broadcasting, BS digital broadcasting. - Guide program table) Searching programs by key words or categories and remote recording from outside the home are available. life.episodeTM View the latest information such as news and music. P.184 VirusScan An application to protect the terminal from virus. Detect virus - (docomo Anshin hidden in installed applications or microSD card. Scan) Campaign Navi View campaign information for Xperia. -

❖Information ･ Some application names may not be displayed fully. ･ Some application icons are displayed with a number of missed calls or unread mails. ･ Downloading and installing are needed for some applications. If download does not get started even when an application is tapped, mark "Unknown sources" (P.111) and then tap the application again.

Before Using the Handset 54 Sorting applications Uninstalling applications You can sort the applications displayed on Some application icons can be deleted from the Applications screen from the "Arrange the Applications screen. apps" menu. ･ Before uninstalling application, back up contents related to the application that you On the Applications screen, tap want to save including data saved in the 1 . application. ･ "Arrange apps" menu appears. ･ Some applications cannot be uninstalled. Own order Select an application icon to sort. (P.55) 1 On the Applications screen, tap Alphabetical Sort in alphabetical order. . Most used Sort in frequency order. Tap an icon with . Recently installed Sort in install date order. 2 ･ Uninstall screen appears. Tap [OK] X [OK]. Selecting an application to move 3 4 Tap . On the Applications screen, tap 1 , then touch and hold an ❖Information application icon you want to move ･ Some applications pre-installed in the terminal to drag. cannot be uninstalled. ･ Application icons can be deleted from the Release your finger from the managing applications screen. For details, see 2 application icon. "Deleting an installed application" (P.113). ･ The application icon moves. 3 Tap . ❖Information ･ To move icons to another Applications screen, drag the icon to the side edge of the screen. ･ To add the Applications screen, drag the icon to the rightmost screen.

Before Using the Handset 55 On a character entry screen, touch Opening the recently used 1 and hold the text box. applications window Tap [Input method] X [International You can view and access recently used 2 keyboard]/[Japanese keyboard]. applications from this window. ❖Information y Press for over a second. ･ You can change Input method (keyboard type) 1 ･ A recently used applications appear during character entry. on a list. Software keyboard Character entry For Japanese keyboard, there are 3 types of software keyboards: QWERTY, 12 key and To enter characters, use the software Japanese syllabary. keyboard which appears when you tap the ❖ character input box in a message, contacts, Information ･ The key display of software keyboard varies etc. depending on the entry screen, character mode or ❖Information settings. ･ Press x to return to the previous screen from the character entry screen.

Selecting input method In this terminal, you can select Input method (keyboard type) from "International keyboard" and "Japanese keyboard".

International Select a language for text entry. keyboard Select to enter language other than Japanese. Japanese Select to enter Japanese. keyboard

Before Using the Handset 56 ■ QWERTY keyboard ■ Japanese syllabary keyboard Japanese characters can be entered in Japanese characters can be entered in "Romaji input" mode. "Kana input" mode using keys arranged according to the Japanese syllabary.

Portrait

Landscape

■ 12 key keyboard Japanese characters can be entered in Landscape "Kana input" mode. Switching the keyboard On the character entry screen, 1 touch and hold the character mode icon .

Portrait Tap ////. 2 ･ : The 12 key keyboard appears. ･ : The QWERTY keyboard appears. ･ : The Japanese syllabary keyboard appears.

Landscape ･ Tap to display Japanese keyboard settings screen.

Before Using the Handset 57 Continued on next page ･ Tap to display plug-in applications Icon Function list. Tap [定型文 (Fixed phrase)] or / Display a pop-up window. [Contact Picker 2.3] to quote. Touch and / : Keyboard switch (two-byte)/ (one-byte): ❖Information hold Character mode switch ･ The QWERTY keyboard is set by default. Also, : Display the setting screen for "Popup on key press", "Auto capitalization", "Word Japanese keyboard. suggestions" and "Error correction" are set to on. : Display plug-in applications list. Tap to display one-byte symbols/two- Entering characters on the byte symbols list and enter them. QWERTY keyboard Switch the tab to display smileys list and enter them. (While entering an sp- Use the QWERTY keyboard to enter mode mail, pictogram tab also Japanese characters in "Romaji input" mode. appears.) A list of plug-in applications appears The main functions of the touch- Touch and and you can activate the plug-in keys hold application. ･ To change character modes and other input Enter punctuation marks such as ? and !. operations, tap the following icons on the Flick from side to side and enter a QWERTY keyboard. space, ・, ～, …, 「, 」, (, and ). Icon Function Move the cursor*1 to the left. Touch and hold to move continuously. Or change / Each time you tap, the character mode the range for conversion. switches "Number" → "Hiragana/Kanji → "Alphabet" in order and a status Move the cursor*1 to the right. Touch icon, →→ / / appears in and hold to move continuously. Or the status bar. change the range for conversion. あ: Hiragana/Kanji When there is an unfixed character Aa: one-byte alphabet/Ａ: two-byte string with the cursor at the right end, alphabet tap to enter the same character as the 12: one-byte number/１: two-byte one at the end. number

Before Using the Handset 58 Continued on next page Icon Function On the character entry screen, 1 touch and hold the character mode *2 Fix input characters and converted characters. When characters are icon . already fixed, enter a line feed at the Tap . cursor position. 2 Delete the character before the cursor. 3 Tap [On-screen keyboard settings] Touch and hold to delete characters X [Select display keys]. continuously. ･ If the assistant keyboard (P.60) is set Enter characters by voice. A candidate to "Off", "Select display keys" cannot list appears. Tap the character string be selected and the displayed you want to enter. keyboard cannot be changed. Appears before conversion is fixed. Tap to switch conversion methods to "直変換". / In alphabet input mode, tap to switch upper case and lower case. In number input mode, tap to switch symbols possible to enter with the keyboard. *1 When any characters are entered, just tap the desired Unmark the checkbox of the key position on the entered character string to move the 4 cursor. you want to hide. *2 " 確定 (Fix)" is displayed before conversion is fixed. In Tap [OK]. some screens such as the search box or mail account 5 registration screen, " 次へ (Next)", "完了 (Done)", "実行 (Go)", etc. appear. Changing symbols Changing display keys ･ You can change symbols (12) displayed in ･ For Japanese input, you can set not to (Symbol assistant area) to the ones display less-frequent-used keys (Q, X, C, you use frequently. etc.) on the QWERTY keyboard. On the character entry screen, 1 touch and hold the character mode icon .

Before Using the Handset 59 Continued on next page Tap . On the character entry screen, 2 1 touch and hold the character mode Tap [On-screen keyboard settings] icon . 3 X [Change symbols]. ･ A list of 12 symbols to be displayed Tap . on QWERTY keyboard appears. 2 Tap [On-screen keyboard settings] 3 X [Choose key type]. Tap any of [Static key resizing]/ 4 [Key highlight while typing]/ [Dynamic key resizing with highlight]/[Off].

■ Static key resizing Widen frequent using key for easy tapping. Tap a symbol you want to change 4 and delete character previously set, then enter a character to display. 5 Tap [OK]. ❖Information ■ Key highlight while typing ･ In Step 3, press t and tap [Reset] X [OK] to Widen frequent using key and highlight restore to the default. the key that is predicted for the next entry.

Selecting an assistant keyboard When you enter in Hiragana/Kanji input mode using the QWERTY keyboard, you can change the assistant keyboard to make the frequent using keys to be displayed widely for easy tapping.

Before Using the Handset 60 ■ Dynamic key resizing with highlight Widen the key that is predicted for the Entering characters on the next entry much further and highlight it. 12 key keyboard Use the numeric keyboard to enter Japanese characters in "Kana input" mode.

The main functions of the touch- keys ･ To change character modes and other ■ Off entering operations, tap the following icons Display equally the width of each key. on the 12 key keyboard.

Icon Function / Each time you tap, the character mode switches "Number" → "Hiragana/Kanji → "Alphabet" in order and a status icon, →→ / appears in the status bar. あ: Hiragana/Kanji Aa: one-byte alphabet/Ａ: two-byte alphabet 12: one-byte number/１: two-byte number / Display a pop-up window. Touch and / : Keyboard switch hold (two-byte)/ (one-byte): Character mode switch : Display the setting screen for Japanese keyboard. : Display plug-in applications list.

Before Using the Handset 61 Continued on next page Icon Function Icon Function Tap to display one-byte symbols/two- Delete the character before the cursor. byte symbols list and enter them. Touch and hold to delete characters Switch the tab to display smileys list continuously. and enter them. (While entering an sp- Select the candidates of direct mode mail, pictogram tab also conversion. When no character is appears.) entered, a space can be entered. A list of plug-in applications appears Touch and hold to enter spaces Touch and and you can activate the plug-in continuously. hold application. Enter characters by voice. A candidate Appears before conversion is fixed to list appears. Tap the character string switch conversion methods you want to enter. (" 予測変換", "直変換"). And display Display the previous character conversion candidates for (opposite order). alphanumeric characters allocated to *1 When any characters are entered, just tap the desired the tapped key. position on the entered character string to move the Appears after conversion is fixed to cursor. return to text before conversion. *2 " 確定 (Fix)" is displayed before conversion is fixed. In some screens such as the search box or mail account 1 Move the cursor* to the left. Touch and registration screen, "次へ (Next)", "完了 (Done)", hold to move continuously. Or change "実行 (Go)", etc. appear. the range for conversion. Move the cursor*1 to the right. Touch Settings of key entry and hold to move continuously. Or ■ Flick input change the range for conversion. Flick up/down/left/right to enter When there is an unfixed character string with the cursor at the right end, characters in each column of kana tap to enter the same character as the syllabary. one at the end. *2 Fix entered or converted characters. When characters are already fixed, enter a line feed at the cursor position.

Before Using the Handset 62 Continued on next page ･ Ex: Entering characters in "な" ■ Toggle entry column Tap the same key continuously to enter You can enter "な" only by tapping. Flick the assigned character. left for "に", up for "ぬ", right for "ね" and To enter characters assigned to the same down for "の". key continuously, operate the followings. ･ Ex: To enter "あお" Flick up ぬ Tap a Tap " あ" once. b Tap , and tap "あ" 5 times. Flick left になね Flick right ･ Ex: To enter "ca" a Tap "ABC" 3 times. b の Flick down Tap , and tap "ABC" once. ❖Information ･ To switch upper/lower case or change to ･ When a certain time is passed after the key voiced sound, flick or tap . tapped, the tapped key's highlighter goes off and ･ Flick input is available by default. You you can enter a character assigned to the same can cancel by the following operation key consecutively without tapping . beforehand. a From the Home screen, press t ･ To switch upper/lower case or change to and tap [Settings]. voiced sound, tap . b Tap [Language & keyboard] → ･ Operate the following to enter [Japanese keyboard] → [On-screen characters in the toggle entry while Flick keyboard settings]. input is set. c Unmark the checkbox of [Flick a From the Home screen, press t input]. and tap [Settings]. b Tap [Language & keyboard] → [Japanese keyboard] → [On-screen keyboard settings]. c Mark [Multitap text input] checkbox.

Before Using the Handset 63 Entering characters on the Icon Function Japanese syllabary keyboard Tap to display one-byte symbols/two- byte symbols list and enter them. You can use the software keys arranged Switch the tab to display smileys list according to the Japanese syllabary to enter and enter them. (While entering an sp- mode mail, pictogram tab also Japanese characters in "Kana input" mode. appears.) The main functions of the touch- A list of plug-in applications appears and you can activate the plug-in keys Touch and hold application. ･ To change character modes and other input Move the cursor*1 to the left. operations, tap the following icons on the Touch and hold to move continuously. Japanese syllabary keyboard. Or change the range for conversion. Move the cursor*1 to the right. Icon Function Touch and hold to move continuously. / Each time you tap, the character Or change the range for conversion. mode switches "Alphanumeric" → When there is an unfixed character "Hiragana/Kanji in order and a status string with the cursor at the right end, icon, / / → appears in tap to enter the same character as the the status bar. one at the end. / Display a character mode switch Select the candidates of direct Touch and window. conversion. When no character is hold / : Keyboard switch entered, a space can be entered.Touch (two-byte)/ (one-byte): and hold to enter spaces continuously. Character mode switch *2 Fix entered or converted characters. : Display the setting screen for When characters are already fixed, Japanese keyboard. enter a line feed at the cursor position. : Display plug-in applications list. Delete the character before the cursor. Tap to switch upper/lower case or add Touch and hold to delete characters voiced sound. continuously. Input characters by voice. A candidate list appears. Tap the character string you want to enter.

Before Using the Handset 64 Continued on next page Icon Function Paste Display when "Cut"/"Copy" is selected. Paste the cut/copied text / In alphanumerics input mode, tap to by "Cut"/"Copy". switch between upper case and lower case or switch to symbols which can be entered from the keyboard. Appears in landscape view. Change Settings of entering settings of Japanese keyboard. *1 When any characters are entered, just tap the desired characters position on the entered character string to move the cursor. For each type of keyboard, you can make *2 " 確定 (Fix)" is displayed before conversion is fixed. In settings related to character entry. some screens such as the search box or mail account registration screen, " 次へ (Next)", "完了 (Done)", From the Home screen, press " (Go)", etc. appear. 実行 1 t, then tap [Settings] X [Language & keyboard]. Editing text Tap [Japanese keyboard]/ While entering characters, touch and hold the 2 [International keyboard]. text box to display the "Edit text" menu and ･ The settings screen for each edit entered text. keyboard appears. Tap an item

Select word Drag the slider to select a part of displayed on the screen to set. entered text. ❖Information Select all Select all entered text. ･ The items vary depending on the keyboard type. Input method P. 5 6 Add "xx" to Add the entered text to the dictionary dictionary. Cut Display when "Select word"/"Select all" is selected. Cut the text selected by "Select word"/"Select all". Copy Display when "Select word"/"Select all" is selected. Copy the text selected by "Select word"/"Select all".

Before Using the Handset 65 Auto capitalization Settings of Japanese Set to automatically capitalize the top letter keyboard you enter in English input mode. From the Home screen, press t Common on-screen keyboard 1 and tap [Settings] X [Language & settings keyboard] X [Japanese keyboard]. You can make keyboard settings such as Key Mark [Auto capitalization] sound, Vibrate, etc. 2 checkbox. From the Home screen, press t 1 and tap [Settings] X [Language & Keyboard skin settings keyboard] X [Japanese keyboard]. You can change keyboard skin. ･ The setting screen for Japanese keyboard appears. From the Home screen, press 1 t, then tap [Settings] X Tap [On-screen keyboard settings]. [Language & keyboard]. 2 ･ Tap (mark/unmark) to set an item in [common on-screen keyboard 2 Tap [Japanese keyboard] X [Select settings]. keyboard skin].

Key sound Set whether to sound at the Tap [Set skin] from the displayed time of key tapping. 3 keyboard. Vibrate Set whether to vibrate at the ❖Information time of key tapping. ･ To download and add keyboard skins from a Pop-up on key Set to popup the key you have website, tap [Search for skin] in Step 3. press tapped at the time of key tapping. Keep keyboard Set to stabilize the last status of type keyboard by screen orientation and kana/alphabet/number input mode.

Before Using the Handset 66 From the Home screen, press Word suggestion settings 1 t, then tap [Settings] X The Word suggestion function shows [Language & keyboard]. predicted conversion candidates when you Tap [Japanese keyboard]. enter Japanese/English characters. Mark the 2 checkbox of Word suggestion checkbox to 3 Mark [Error correction] checkbox. set options "Error correction" and "Auto space" These options help you entering Setting Auto space characters with ease. ･ When selecting English word suggestion, Auto space enters a space next to the Setting Word suggestions entered character. However, space is not From the Home screen, press entered automatically in the mail address or 1 t, then tap [Settings] X URL input fields. [Language & keyboard]. 1 From the Home screen, press Tap [Japanese keyboard]. t, then tap [Settings] X 2 [Language & keyboard]. 3 Mark [Word suggestions] checkbox. 2 Tap [Japanese keyboard]. ❖Information 3 Mark [Auto space] checkbox. ･ Flick or drag downward in the word suggestion field to enlarge suggestion field in which you can see more word suggestions and to hide the User dictionary settings keyboard. To show the software keyboard, tap [戻 To display the word as the preferred る (Back)] or press x. candidate when entering characters, set the Setting Error correction user dictionary beforehand. ･ Error correction corrects mistyped characters and shows conversion candidates before conversion in one-byte alphabet input mode when entering characters with QWERTY keyboard.

Before Using the Handset 67 Registering words in user Editing user dictionary dictionaries On the user dictionary screen, There are 2 types of user dictionaries: "My 1 select a word you want to edit. words Japanese" (Kana/Kanji) and "My words t English" (one-byte alphabet). 2 Press , then tap [Edit]. From the Home screen, press 3 Edit the content and tap [Save]. 1 t, then tap [Settings] X [Language & keyboard]. Deleting words from user dictionary 2 Tap [Japanese keyboard]. Tap [My words Japanese]/[My 1 On the user dictionary screen, 3 words English]. select a word you want to delete. t Press t, then tap [Add]. Press , then tap [Delete] X 4 2 [OK]. 5 Tap the character input box for ･ Tap [Delete all] X [OK] to delete all "Reading" and fill it out, then tap words in the list. [次へ (Next)]. 6 Enter words in the input box for Setting Words by learning "Word" and tap [完了 (Done)]. 1 From the Home screen, press Tap [Save]. t, then tap [Settings] X 7 [Language & keyboard]. ❖Information Tap [Japanese keyboard] X [Learn ･ Up to 50 characters (regardless of one-byte or 2 two-byte characters) can be stored for a "Reading" words]. and "Word", and up to 500 items can be stored in Mark [Save word while typing] the user dictionary. 3 checkbox. ･ When entering characters, tapping [直変換 (Direct conversion)] in the word suggestion field may give ･ To reset all learning, tap "Delete saved priority to some registered words. words" X [OK].

Before Using the Handset 68 Continued on next page ❖Information Tap [OK] X [OK]. ･ To delete learned words individually, touch and 6 ･ The data is backed up or restored. hold a word you want to delete and tap [学習データ削除 (Delete learned word)]. ❖Information ･ If restoring data is failed, user dictionary in the Backing up and restoring terminal restores to the default. dictionary User dictionary and Words by learning can Using plug-in application "定型 be backed up onto a microSD card and 文 (Fixed phrase)", "Contact restored when needed. Picker 2.3" 1 From the Home screen, press t When entering characters, touch and hold and tap [Settings] X [Language & or character mode icon and tap to keyboard]. view plug-in applications list. Tap a plug-in Tap [Japanese keyboard] X application, "定型文 (Fixed phrase)" or 2 [Backup & restore]. "Contact Picker 2.3" to quote. Phrases are saved in 5 categories of "インターネット Tap [Backup]/[Restore]. 3 (Internet)", "あいさつ (Greeting)", "ビジネス Mark a dictionary you want to back (Business)", "返事 (Reply)", "プライベート 4 up or restore from among [My (Private)" in advance. You can add, delete words Japanese], [My words and edit categories and phrases. English], or [Learn words]. If contacts are saved in Contacts, you can use "Contact Picker 2.3" when entering Tap [Go]. character. From the saved contents (name of 5 ･ If a backed up file exists on the contact, phone number, mail address, etc.) in microSD card when backing up, a Contacts, mark items you want to quote. On screen asking whether to overwrite the contacts list screen, tap [History] or appears. When restoring, a screen [Favorites] to display selected contacts. asking whether to overwrite the user dictionary in the terminal appears.

Before Using the Handset 69 Adding a category of phrases On the Info screen, tap [OK]. 3 The plug-in setting screen appears. Add a new category and register a phrase. From the Home screen, tap , 4 Tap [Download new applications]. 1 then tap [定型文 (Fixed phrase)]. Tap an application and follow the A list of categories appears. 5 onscreen instructions. 2 Press t, then tap [カテゴリー追 ❖Information 加 (Add category)]. ･ Marked plug-in applications in the plug-in setting screen can be activated in the character entry Enter the category name and tap 3 screen. Checkboxes for preinstalled plug-in [OK]. applications, "定型文 (Fixed phrase)" and "Contact Picker 2.3" are marked by default. Tap [ 新規追加 (Add phrase)] and 4 enter a phrase. POBox Touch User Guide Tap [OK]. 5 You can view the detailed explanations on the ❖Information high performance Japanese keyboard from ･ When you tap each category, a list of registered the basic to application. The latest phrases appears. Tap a phrase to edit/delete. information can be obtained from the ･ To restore the default phrases, in the category list, websites for plug-in applications or keyboard press t, then tap [初期化 (Reset)]. skins. Adding a plug-in application From the Home screen, press t 1 and tap [Settings] X [Language & You can install and add plug-in applications keyboard]. to use when entering characters. Tap [Japanese keyboard] X From the Home screen, press 2 [POBox Touch User Guide]. 1 t, then tap [Settings] X [Language & keyboard]. Tap [Japanese keyboard] X 2 [Manage applications].

Before Using the Handset 70 ces i Entering pause (,) Making/Receiving calls This function allows you to operate voice mail ng/Network Serv i Call at home, to reserve tickets or to check the Making a call balance of a bank account, etc. From the Home screen, tap From the Home screen, tap 1 [Phone]. 1 [Phone]. Enter the number of the recipient Enter the number of the recipient 2 and tap [Call]. 2 and touch and hold the asterisk (*) ･ If a wrong number is entered, tap key until a comma (,) appears. on the right of the phone number field to delete the number. Emergency call ❖ Information When the terminal is within range of the ･ If the screen orientation does not change service area, you can make an emergency automatically when you turn the terminal sideways, call of 110 (Police), 119 (Fire and ambulance) from the Home screen, press t and tap [Settings] X [Display], then mark [Auto-rotate or 118 (Japan Coast Guard). screen] checkbox. From the Home screen, tap 1 [Phone]. Enter the emergency number and 2 tap [Call]. ･ If a wrong number is entered, tap on the right of the phone number field to delete the number.

Calling/Network Services 71 Continued on next page ❖Note ･ Note that you may not connect to the local Fire ･ In Japan, when UIM is not inserted to the terminal, Department or Police Station depending on where the emergency numbers of 110, 119, 118 are not you are calling from. In this case, try to call from a available. public phone or an ordinary phone in the ･ This terminal supports "Emergency call location neighborhood. information". If you make a call to emergency numbers such as 110, 119, or 118, the information Emergency call during SIM card of a location where you are calling from (location lock information) is automatically notified to the Emergency call acceptance organization such as Tap [Emergency call]. the Police Station. 1 The Emergency call acceptance organization may Enter the emergency number and not be able to figure out your exact location 2 tap [Call]. depending on the location where you place a call ･ If a wrong number is entered, tap or radio wave condition. on the right of the phone number field If you make a call without the caller ID, such as by to delete the number. entering a phone number with "184" for each call, the location information and phone number are not ❖Note notified. However, the Emergency call acceptance ･ In Japan, while entering PIN code on the screen organization may decide to obtain the location (P.108) or during PUK lock (P.109), the emergency information and phone number regardless of your numbers of 110, 119, 118 are not available. settings when they consider it is necessary for lifesaving, etc. Note that the areas/time for which the "Emergency call location information" is ready Ending a call to be used vary depending on the preparatory state of each Emergency call acceptance organization. Tap [End call]. ･ When you call the Police (110), Fire/Ambulance 1 (119), or Maritime rescue (118) from the terminal, clearly indicate that you are calling from a mobile Making an international call phone, give your phone number and your current location precisely for checking callback from the (WORLD CALL) police/fire department. Also, make a point to call in For details on WORLD CALL, refer to a stationary position to prevent the call from being DOCOMO International Services website. dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case From the Home screen, tap the Police or Fire/Ambulance may have to get in 1 [Phone]. contact with you.

Calling/Network Services 72 Continued on next page Touch and hold [0] key until "+" ❖Information 2 sign appears. ･ The icon appears even during the screen lock or ･ When making an international call, "+" key lock, and you can decline a call by the same is replaced by an international access operation. code. Using Stereo Headset with Enter the country code X Area 3 code X A phone number of Microphone recipient and tap [Call]. You can make or answer a call with Stereo ･ If the area code begins with "0", omit Headset with Microphone (Sample) "0". However, "0" may be required to connecting to the terminal. dial to some countries or areas such as Italy.

Microphone Receiving a call While receiving a call, touch 1 (left) and drag it to (right). Switch

❖Information ･ If you are using regular headphones without a microphone, you need to speak to the microphone of the terminal. ･ The icon appears even during the screen lock or key lock, and you can answer a call by the same operation.

Headset connection jack Declining a call While receiving a call, touch 1 (right) and drag it to (left).

Calling/Network Services 73 ■ Making a call Adjusting the ear speaker Make a call with Stereo Headset volume 1 with Microphone connected. ･ An operation of making call is the 1 Press m during a call. same as usual operation. (P.71) ❖Information Press the switch to end the call. 2 ･ You can adjust the ear speaker volume only during a call. ■ Receiving a call 1 While receiving a call, press the Muting the ringtone for an switch of Stereo Headset with incoming call Microphone. Press m when a call is ･ The call is connected. 1 received. ･ When receiving a call, you can decline the call by pressing the switch ❖Information for over a second. ･ You can also press p to mute the ringtone for an incoming call. To end a call, press the switch 2 ･ Press up or down of m on the Home screen again. to adjust the ringtone volume. ❖Information ･ Even when you listen to music with Stereo Headset with Microphone connecting to the terminal, you can answer a call by pressing the switch. Music pauses on calling, and restarts when ending the call. ･ Connecting and removing Stereo Headset with Microphone repeatedly during a call may disconnect a call.

Calling/Network Services 74 i End call Operations during call t: During a call, press t and tap [Hold], ■ Calling screen while a call is on hold, press t and tap [Retrieve call]. ･ To set a call on hold, "Call waiting" subscription is required. (P.88) a e ❖Note b ･ Do not bring the terminal close to your ear with the f speakerphone ON to avoid hearing damage. c g

d h

i Call log a A photo saved in Contacts In the call log, missed ( ), received ( ), b Name of the other party and dialed ( ) calls are displayed in the list c Speaker: Set speakerphone on/off. ･ Other party's voice can be heard from the in chronological order. speaker and handsfree call can be made. ･ When the speakerphone is on, a speakerphone icon appears in the status bar. Displaying missed calls d Contacts: View contacts list screen. When you have missed calls, appears in e Call duration time the status bar. f Number of the other party g Mute: Set muting on/off of the microphone during Drag the status bar downwards. a call. 1 ･ When the microphone is muted, a mute icon Tap [Missed call]. appears in the status bar. 2 h Dial key: Enter the phone number you want to add to make a call. Calling a number from the call ･ The ongoing call is automatically on hold. ･ To add a call, "Call waiting" subscription is log required. (P.88) From the Home screen, tap 1 [Phone] X [Call log]. 2 Tap next to the desired number. Calling/Network Services 75 ❖Information Adding a number from the call ･ You can delete only one contact by touching and log to your contacts holding a contact to delete on the call log list, then tapping [Delete from call log]. From the Home screen, tap 1 [Phone] X [Call log]. Tap and hold the number, then tap Contacts 2 [Add to Contacts]. In Contacts, you can enter various ･ You can select [Add to Contacts] from information for contacts, for example, phone the menu displayed when you tap the numbers, email addresses and web service number. accounts. When you view a contact, you get 3 Tap desired contact, or tap [Create quick access to all communication with that new contact]. contact. ･ Tap [Create new contact] to display a screen for selection of the saving Opening Contacts locations appears. You can select Phone contact or docomo account as From the Home screen, tap , the saving location. 1 then tap [Contacts]. ･ The contacts list screen appears. Edit the contact details and tap ･ You can also open Contacts from the 4 [Done]. Home screen, tap [Phone] X [Contacts]. Deleting the call log ❖Information From the Home screen, tap ･ The first time you open Contacts, a setup wizard 1 [Phone] X [Call log]. starts. In the setup wizard, you can load contacts from UIM or microSD card, or synchronize contacts t 2 Press , and tap [Clear call with the account that you specified in advance. To log]. use Contacts, tap [Done].

Calling/Network Services 76 Continued on next page ･ If the screen orientation does not change * Depending on the usage, it may be different from online automatically when you turn the terminal sideways, display of Google Talk. from the Home screen, press t and tap [Settings] X [Display], then mark [Auto-rotate Managing contacts screen] checkbox. Adding a contact Contacts list screen On the contacts list screen (P.77), On the contacts list screen, you can view 1 tap at the top right. details of your contacts. You can add a contact picture, and display updating status Tap [docomo]/[Phone contact]. 2 When you set Google account etc., it information of Social Networking Service ･ appears as a saving location. (SNS). Enter a name. a c 3 d Enter or select the desired 4 additional information for the b e f contact.

g ･ You can add items other than phone number, email address and ringtone h by tapping [Add field]. i 5 Tap [Done]. a Contact search field ❖Information b A picture saved in Contacts For using "Send calls directly to voicem.", a c Icon for adding a new contact ･ subscription of Voice Mail service is required. For d Myself (your own phone number) details, see "Voice Mail Service" (P.86). e A contact saved in Contacts When you save " (Reading f Japanese syllabary or alphabetical index for ･ふりがな（姓／名） (Last name/First name))", contacts list is displayed browsing contacts according to Japanese syllabary order or g Online status* of Google Talk (Chat) (P.131) alphabets (only when Select language is set to h Updating status information for the Social 日 (Japanese)). Networking Service (SNS) 本語 i Screen tabs (Phone/Call log/Contacts/Favorites)

Calling/Network Services 77 Using shortcuts of Contacts Changing display conditions for When you tap the photo (image) part on contacts contacts list screen, shortcuts for phone Press t and tap [Filter] on the contacts number, mail, etc. appear. Tap the shortcut to list screen to set display items, saving make a call, or create and send a mail. location (docomo, phone contact) and

Make a call to saved phone number. whether to show or hide for each account. "Info" filter (P.82) screen of the contact ■ Filter contacts appears. Mark the following items to set. Create and send message (SMS). Select an email application to create and send Contacts with Show only contacts with phone an email. phone numbers numbers registered. * You can also use the registered Google Talk account, Online contacts Show only the contacts of online addresses, etc. Google talk users. ❖ Information ■ Setting to show/hide contacts ･ When you tap a part other than photo (image) on Tap a Social Networking Service (SNS) the contacts list screen, "Info" filter (P.82) screen of name which is made contacts saving the contact appears instead of shortcuts. ･ Email shortcut appears when email address is location setting or account setting (P.115) saved in the selected contact and you have set and mark [All contacts] checkbox to show your email account. If you have not set your email synchronized contacts. Unmark to hide account, shortcut for Gmail / appears. the contacts. * cannot be used. Searching for a contact Editing a contact On the contacts list screen (P.77), 1 On the contacts list screen (P.77), 1 enter searching name or reading in tap the name part of contact you the search field. want to edit. ･ "Info" filter (P.82) screen of the contact ･ All contacts beginning with those appears. letters appear.

Calling/Network Services 78 Continued on next page ･ When you tap the image (photo) part Deleting contacts of the contact, contact shortcuts appear (P.78). Tap to display "Info" On the contacts list screen (P.77), 1 t filter screen. press , then tap [Delete contacts]. 2 Tap [Edit]. ･ By tapping (Add field) on the 2 Mark the contacts you want to editing screen, you can add delete. information to enter. ･ If you want to delete all contacts, tap [Mark all]. 3 Edit the desired information and tap [Done]. 3 Tap [Delete] X [OK]. Linking contacts ❖Information ･ You can also delete the contacts by touching and You can bind multiple contacts together into holding a contact on the contacts list screen, then one. tapping [Delete contact] X [OK]. On the contacts list screen (P.77), Calling a contact 1 touch and hold the desired contact, then tap [Join contacts]. On the contacts list screen (P.77), ･ The link candidates appear. 1 tap a name of contact to call to. 2 Tap the contact to link. 2 Tap a desired phone number. Tap [OK]. 3 Checking Myself and editing ❖Information contact information ･ To cancel link of contacts, on Contact edit screen, press t, then tap [Separate] X [OK]. On the contacts list screen (P.77), 1 tap [XXX-XXXX-XXXX] (Myself) at the top of the contact list. Tap [Edit]. 2 ･ The "Myself" edit screen appears.

Calling/Network Services 79 Continued on next page Enter the new information or make Select sending method and follow 3 the changes you want. 4 the onscreen instructions. ･ By tapping (Add field) on the ❖Information editing screen, you can add ･ To use Bluetooth function, tap [Turn on] to activate information to enter. Bluetooth function, search destination Bluetooth When you are done, tap [Done]. devices, and send data. 4 ･ If you want to send data as files attached to email/ ❖ Gmail, send from the compose screen for the mail Information service in which you have set an account. If you ･ In "Myself", you can add multiple phone numbers, select "Gmail" when you have not set an account, emails, etc. The history of dialed/received calls to/ setup wizard appears. You can create and send from the registered phone numbers is displayed in email after settings are done. "Calls" of "Info" filter (P.82) screen. ･ If you set an email account by "Email" application, Marking a contact as a favorite your email account is shown on the "Myself" detailed screen but not on the "Myself" edit screen. You can mark a contact as a favorite. The favorite list provides quick access to the Sending your contact via contacts you have marked. Bluetooth/Email/Gmail On the contacts list screen (P.77), You can send the saved contacts or "Myself" 1 touch and hold the contact you information by using Bluetooth function want to mark. (P.143), email attachment, etc. 2 Tap [Add to Favorites]. 1 On the contacts list screen (P.77), press t, then tap [Send ❖Information contacts]. ･ You can also add the contacts to favorites by tapping [Favorite] on "Info" filter (P.82) screen. Mark the contacts you want to 2 ･ On the contacts list screen, tap [Favorites] to send. display contacts registered to Favorites. ･ If you want to mark all contacts, tap [Mark all]. 3 Tap [Send] X [OK].

Calling/Network Services 80 Setting a photo to a contact On the contacts list screen (P.77), 1 press t, and tap [Settings] X 1 On the contacts list screen (P.77), [Accounts & sync]. tap the contact. ･ The screen for basic settings for Tap [Edit]. synchronization and account 2 management appears. If you do not Tap . 3 have an account yet, you can tap Tap [Gallery]/[Take new photo]. [Add account] to set. (P.115) 4 ･ Select [Gallery] to select a saved Tap an account name. photo and add it. 2 ･ Items which can be synchronized ･ Select [Take new photo] to shoot a appear. photo and save it. Tap [Sync Contacts]. Tap [Done]. 3 5 ･ After synchronization is complete, contacts information such as "Friends" ❖Information appears on the contacts list screen. ･ You can also set photo to a contact by the following operation. ･ You can mark [Activate auto-sync] - From the Home screen, [メディア (Media)] X checkbox in Step 2 to synchronize. Tap [Gallery]. Select an image to set, press t For information on automatic and tap [Set as] X [Contact picture]. Select a synchronization, see "Setting contact you want to register to and tap [Save]. automatic synchronization" (P.116).

Displaying contacts ■ Setting to show or hide updating information for the Social status information Networking Service (SNS) On the contacts list screen (P.77), 1 press t, and tap [Settings] X If you have an account set for a Social [Show status updates]. Networking Service (SNS) (P.115), you can ･ A selection screen of the service to synchronize contacts to display contacts display updating status information information such as "Friends" on the contacts appears. list screen. You can also display updating status information of each service. Calling/Network Services 81 Continued on next page 2 Tap an item you want to display. Filter Information ･ Tap [All] to show updating status Photos Image posted by "Friends" in information of all networking services. contacts or tagged image If 2 or more service links are set, Interests "いいね！ (like)" information posted single information of the most recently by "Friends" in contacts updated account can be seen. Facebook Facebook status updates for the ･ Tap [Off] not to display status contact updating information. ･ Appears if you have connected to update information from Facebook account in Timescape. Dialing Service dial number Messages Message (SMS) conversations history with the contact On the contacts list screen (P.77), Calls Call history with the contact 1 press t, and tap [Settings] X [Service dial number]. ･ Service dial number (ドコモ総合案 Exporting/Importing contacts 内・受付 (General Inquiries), ドコモ You can export/import contacts from/to 故障問合せ (Repairs), etc.) saved on microSD card or UIM. This is useful, for the UIM appear. example, when you want to transfer the 2 Tap a contact you want to call. contact information to another phone. ❖Information The contact information filter ･ You can also use a synchronization service for synchronizing your contacts. For details, see "Data When you are viewing a contact details synchronization" (P.116). screen, you can flick the filter at the bottom of ･ When contacts are imported to other mobile the screen right or left to show the following phone, phone number type "Home:/H", "Mobile:/M" information. or "Work:/W" may appear at the next to the name of the contacts backed up from the terminal to UIM. If Filter Information there is no corresponding item, "/O" may appear. Info Contact phone numbers, mail addresses, Facebook profile, latest status information, etc.

Calling/Network Services 82 Exporting all contacts on microSD 4 Tap [OK]. card ❖Information On the contacts list screen (P.77), ･ Some part of data may not be imported or 1 press t, then tap [Back up exported depending on the contacts. contacts] X [Memory card]. Exporting names and numbers on 2 Tap [OK]. UIM ❖Information On the contacts list screen (P.77), ･ If display conditions for contacts (P.78) are set, 1 press t, then tap [Back up only contacts to be displayed are exported. contacts] X [SIM card]. Importing contacts from microSD 2 Mark the contacts you want to card copy. ･ If you want to mark all contacts, tap On the contacts list screen (P.77), [Mark all]. 1 press t, then tap [Import Tap [Back up]. contacts] X [Memory card]. 3 Tap [docomo]/[Phone contact]. Tap [Add contacts]/[Replace all 4 contacts]. 2 ･ When you set Google account etc., it If you select [Replace all contacts], all appears as an import destination. ･ existing UIM information is replaced. Select the vCard file to import. ❖ 3 ･ If there is only one vCard file, vCard Information file selection screen does not appear. ･ When you copy a contact to the UIM, only the contact name and the first number is saved. This is The file is imported immediately. due to limited memory on a UIM. ･ If a vCard file has multiple contacts, ･ Contacts without phone number cannot be saved they are imported all at once. to the UIM. ･ If there are 2 or more vCard files, tap any of [Import vCard file]/[Import vCard files]/[Import all vCard files] to select.

Calling/Network Services 83 Importing contacts from UIM Exporting contacts to microSD card 1 On the contacts list screen (P.77), press t, then tap [Import Attach a microSD card to the contacts] X [SIM card]. 1 terminal. 2 Tap [docomo]/[Phone contact]. On the "エクスポート (Export)" tab ･ When you set Google account etc., it 2 screen, tap [開始 (Start)]. appears as an import destination. ･ The Contacts data saved in docomo To import one contact, tap the account is saved onto the microSD 3 contact you want to import. card. To import all contacts, tap [Import all]. ･ Importing contacts on microSD ･ If there is a contact whose name is matched with the imported contact, card the contact is imported as a Attach a microSD card contains separated one. 1 the Contacts data to the terminal. ❖Information On the "インポート (Import)" tab ･ Names and phone numbers can be imported. 2 screen, tap a file you want to import. Using PhoneBookCopy 3 Tap [ 上書き (Overwrite)]/ You can copy the Contacts data to or from [追加 (Add)]. another terminal by using microSD card. You ･ Imported Contacts data is saved in can also copy the Contacts data registered in docomo account. Google account to docomo account. From the Home screen, tap , 1 then tap [PhoneBookCopy]. ･ For the first time of use, agree to "使用許諾契約書 (License Agreement)".

Calling/Network Services 84 Copying contacts registered in Google account to docomo Network Services account Available Network Services On the "docomoアカウントへコ 1 ピー (Copy to account)" tab You can use the following DOCOMO network screen, tap a Google account you services on the terminal. For details on the want to copy. outline and how to use each service, see the relevant pages indicated in the following table. Tap [ 上書き (Overwrite)]/ ･ You cannot use the network services when 2 [追加 (Add)]. you are outside of the service area or in a ･ Copied Contacts data is saved in location without the radio wave. docomo account. ･ "Stop of service" does not mean canceling ･ You can also copy the Contacts data the subscription such as Voice Mail service, saved in "Phone contact" to docomo Call Forwarding Service, etc. account as well as Google account. ･ For details, see the "Mobile Phone User's ❖Information Guide [Network Services]". ･ If contact item names (e.g. Phone number, etc.) of ･ For subscription and inquiry, contact the other terminal are different from ones of your "General Inquiries" on the last page of this terminal, the item names may be changed or manual. deleted. Also, some text may be deleted in copied destination, because savable characters in a Monthly Service name Application Page contact vary by terminal. charge ･ Group information cannot be imported. Voice Mail Paid Required P.86 ･ When exporting contacts to microSD card, data Service without Name cannot be copied. Call Waiting Paid Required P.88 ･ When importing contacts from microSD card, files Service created by "all backup" cannot be loaded. Call Forwarding Free Required P.90 Service Caller ID Free Not required P.91 Notification Service

Calling/Network Services 85 Continued on next page ❖Information Basic flow of the Voice Mail ･ In this manual, the outlines of each network service Service are described with menu operations.

Activate the Voice Mail Service. Voice Mail Service ▼ The Voice Mail Service takes messages for Your terminal receives a call. you, as long as it answers a call with the answering message, if there is an incoming ▼ call when you are in a location without the If you do not answer the call, it is radio wave, while the terminal is powered off, connected to the Voice Mail service or when you cannot answer a call within the center. preset ring time. ･ When the Voice Mail Service is set to ▼ "Activate" and if you do not answer an The caller leaves a message. incoming call, the call is saved in "Call log" as a "Missed call" and (Missed call) If you are in a hurry and wish to leave a appears in the status bar. message without listening to the Voice ･ The terminal does not support Voice Mail Mail answering message, you can service of videophone call. Call "1412" to set interrupt the answering message and "Not support". switch to message recording mode immediately by tapping [Dialpad] → [#]. ❖ Information ▼ ･ This terminal does not have Record message function which records voice messages on internal The receiver is notified that the Voice memory. Use the Voice Mail Service. Mail service center has taken the voice ･ The message can be recorded up to 3 minutes for message. 1 message, up to 20 messages, and stored up to 72 hours. ▼ ･ The number of Voice Mail messages appears until you have played all messages. Play the voice message.

Calling/Network Services 86 Setting Voice Mail Service Check messages* Check if a new message is stored. After checking, the t 1 From the Home screen, press completion message appears. and tap [Settings]. Notification Set whether to alert you of a Tap [Call settings] X [Network settings new message with the tone or vibration. 2 service setting]. Activate Missed When it is received while the Tap [Voicemail]. Call Notif. terminal is powered off or 3 ･ Select items you want to use from the outside of the service area, an following. SMS is sent to notify you of the information about the call (date, Activate Tap [OK] to activate the Voice time and the caller ID) once you Voicemail Mail Service. turn the terminal back on or Set ring time Enter the ring time (0 to 120 move back in to the service seconds). area. It changes only the ring time. Select [All Calls] to notify you of If the ring time is set to 0 all received calls. seconds, an incoming call is Select [Calls with Caller ID] to not saved in "Call log". notify you of only the calls with the caller ID. Deactivate Tap [OK] to deactivate the Voicemail Voice Mail Service. Deactiv. Missed While starting the notification, Call Notif. tap [OK] to deactivate the Check Voicemail Check the current service notification. setting settings. Check setting Check the notification settings. Play messages* Tap [OK] to call the Voice Mail service center. After this step, * After operation is finished, you receive the "NTT DoCoMo VM:XX" SMS. follow the voice prompts to play the message. ❖Information Voicemail Tap [OK] to change the Voice ･ If you have the recorded messages stored at the setting* Mail setting with the voice Voice Mail service center, (New arrival SMS prompts. The call is connected message) and (Voice Mail message) appear to the Voice Mail service center. on the status bar. (Voice Mail message) After this step, follow the voice disappears when you delete all messages. prompts to operate. ･ The notification setting and notifications (message (SMS) reception) are not charged.

Calling/Network Services 87 Playing the voice message Setting Call Waiting

When the SMS notification "NTT From the Home screen, press t 1 DoCoMo VM:XX" appears, tap 1 and tap [Settings]. [New message] from the Tap [Call settings] X [Network Notification panel (P.38). 2 service setting]. ･ A recorded message plays. Tap [Call Waiting]. Follow the voice prompts to 3 You can select the following operations. 2 operate. Activate Call Tap [OK] to activate the Call Waiting Waiting Service. Call Waiting Deactivate Call Tap [OK] to deactivate the Call When there is another incoming call while you Waiting Waiting Service. are on a call, the in-call ringtone notifies you Check settings You can check the current of the second call. You can answer the service settings. second call by putting the first call on hold. You can also put your current call on hold and Putting the current call on hold and place a call to another party. answering an incoming call

❖Information When you hear the beep during a ･ Even when the call is on hold, the caller is charged 1 call, tap [Answer]. for a call fee. The first call is put automatically on hold and the incoming call is received. ･ The terminal does not support Conference call. ･ Tap [Busy] to connect the incoming call to the Voice Mail service center. Activating Voice Mail service is required beforehand.

Calling/Network Services 88 Continued on next page 2 Switch to the first call. Putting the current call on hold and ･ To end the later call, tap [End call]. making a call to another party The later call is terminated and switched to the first call. 1 During a call, tap [Contacts]/ ･ To put the later call on hold, tap [Dialpad]. [Switch to this call]. Enter the other party's phone The later call is put on hold and 2 number, then tap . switched to the first call. Tapping ･ The first call is automatically on hold [Switch to this call] switches to the and switched to the new call you other party. made. You can also search for a contact by tapping [Contacts] and Ending the current call and [Call log]. answering an incoming call 3 Switch to the first call. 1 When you hear the beep during a ･ To terminate the new call, tap [End call, tap [End current call and call]. answer]. The new call is terminated and ･ The first call is terminated and the switched to the first call. incoming call is received. ･ To put the new call on hold, tap [Switch to this call]. The new call is put on hold and switched to the first call. Tapping [Switch to this call] switches to the other party.

Calling/Network Services 89 Call charge for the Call Forwarding Call Forwarding Service Service The Call Forwarding Service forwards a voice call to a preset forwarding number when you Caller are in a location without the radio wave, the terminal is powered off, or you do not answer The caller is charged for a call fee. the call within the preset ring time. ･ When the Call Forwarding Service is set to Call Forwarding Service subscriber "Activate Call Forwarding" and if you do not answer an incoming voice call, the call is The Call Forwarding Service saved in "Call log" as a "Missed call" and subscriber is charged for a call (Missed call) appears in the status bar. fee.

Basic flow of the Call Forwarding Forwarding party Service ❖Information Save the forwarding number. ･ Even when the Call Forwarding Service is set to "Activate Call Forwarding", you can answer the call ▼ during a ringtone sounds. Activate the Call Forwarding Service. Setting Call Forwarding Service ▼ 1 From the Home screen, press t Your terminal receives a call. and tap [Settings]. ▼ Tap [Call settings] X [Network 2 service setting]. If you do not answer the call, it is automatically forwarded to the specified forwarding number.

Calling/Network Services 90 Continued on next page 3 Tap [Call Forwarding]. Setting on/off of the Call ･ Select items you want to use. Forwarding guidance Activate Call Enter the forwarding number and From the Home screen, tap Forwarding ring time, then tap [OK] to 1 activate the Call Forwarding [Phone]. Service. [1] [4] [2] [9] X Tap [Call]. Change Mark the checkbox and enter the 2 ･ Follow the voice prompts to operate. forwarding forwarding number. For details, see the "Mobile Phone number User's Guide [Network Services]". Register Mark the checkbox and enter the ring time ring time (0 to 120 seconds). If the ring time is set to 0 Caller ID Notification seconds, an incoming call is not saved in "Call log". When making a call, your phone number can Deactivate Call Tap [OK] to deactivate the Call be shown in the display of the recipient's Forwarding Forwarding Service. phone you are calling. The caller ID is Register the Change the forwarding number. important personal information. Carefully forwarding Enter the forwarding number and decide whether you notify a recipient of your number tap [OK]. caller ID. Activate Call Mark the checkbox to change the ･ You cannot set the Caller ID notification Forwarding forwarding number and to where the terminal indicates the outside of activate the Call Forwarding Service simultaneously. service area ( ). If fwd number When the forwarding number is ･ The setting is available only the other party's busy* busy, an incoming call is phone can display the caller ID. connected to the Voice Mail ･ If an announcement requesting caller ID is service center. Tap [Connect] to heard when making a call, set Caller ID turn on the setting; tap [Do not notification or add prefix 186 to the phone connect] to turn off the setting. number to call again. Check setting Check the current service settings. 1 From the Home screen, press t * A subscription of Voice Mail service is required. and tap [Settings].

Calling/Network Services 91 Continued on next page Tap [Call settings] X [Network 2 service setting]. Tap [Caller ID Notification]. 3 ･ Select items you want to use.

Activate Caller Enter the Network security code, ID Notification then tap [OK]. Your phone number is notified to the other party. Deactivate Enter the Network security code, Caller ID then tap [OK]. Notification The caller ID notification is deactivated. Check Check the current settings. settings

Calling/Network Services 92 ngs i ❖Information Sett Viewing the setting menu ･ Alternatively, from the Home screen, tap , then tap [Settings]. From the Home screen, press 1 t. Wireless & networks 2 Tap [Settings]. ■ Setting menu You can make network settings such as Wi-Fi, Bluetooth function, etc. Sony Ericsson Set Facebook synchronization function Airplane mode P. 9 5 for the terminal (P.115), or Wi-Fi/Wi-Fi settings P. 9 6 make settings for Bluetooth/Bluetooth settings P.143 connecting the terminal to Tethering & portable hotspot P.100 a PC or another device via USB connection or Wi-Fi VPN settings P.101 (P.138). Mobile networks P. 9 3 , P. 19 0 Wireless & networks P. 9 3 Call settings P.102 Setting an access point Sound P.103 Display P.105 An access point for connecting to the Internet Location & security P.106 (sp-mode, mopera U) is already registered. Applications P.111 You can add or change it if necessary. Accounts & sync P.114 By default, sp-mode (P.95) is set for the usual Privacy P.117 access point. Storage P.118 Language & keyboard P.119 Voice input & output P.119 Accessibility P.120 Date & time P.120 About phone P.121

Settings 93 Checking the access point you use 7 Press t, then tap [Save]. 1 From the Settings screen (P.93), ❖Information tap [Wireless & networks] X ･ Do not change the MCC/MNC. If you change MCC/ [Mobile networks] X [Access Point MNC to other than the default value (440/10), the Names]. settings do not appear on the APNs screen. When ･ Available access points (APN) the MCC/MNC settings do not appear on the APNs screen, make APN settings with [Reset to default] appear. or [New APN] again. ･ It is recommended that you use the ･ Note that, when using the prediction conversion by displayed access point without editing. one-byte alphabet entry mode (English mode) with ❖ mark in [Auto space] checkbox on Japanese Information keyboard settings screen (P.67), spaces may be ･ If you have several available connections, a entered automatically. In this case, delete spaces. marked radio button to the right indicates the active network connection. Initializing an access point Setting an access point By initializing an access point, the default additionally state is restored. 1 From the Settings screen (P.93), From the Settings screen (P.93), tap [Wireless & networks] X 1 tap [Wireless & networks] X [Mobile networks] X [Access Point [Mobile networks] X [Access Point Names]. Names]. 2 Press t. 2 Press t, then tap [Reset to 3 Tap [New APN]. default]. Tap [Name], enter a name and tap 4 [OK]. Tap [APN] and enter the access 5 point name and tap [OK]. Tap and enter all other information 6 required by your network operator. Settings 94 ❖Information sp-mode ･ "mopera U設定" (mopera U settings) is an access sp-mode is ISP for NTT DOCOMO point for setting mopera U. When you use the access point for setting mopera U, packet smartphone. In addition to accessing communication charges for setting do not apply. Internet, you can use the mail service using Note that you can set only the initial setting screen the same address as i-mode mail or the change setting screen. For details on (@docomo.ne.jp), etc. sp-mode is a service mopera U settings, refer to mopera U website. requiring subscription. For details on ･ Subscription to packet flat-rate service is required for using "mopera U (スマートフォン定額) sp-mode, refer to NTT DOCOMO website. (mopera U (Smartphone flat-rate))". For details on mopera U (Smartphone flat-rate), refer to NTT mopera U DOCOMO website. mopera U is ISP of NTT DOCOMO's Internet Airplane mode connection. If you have subscribed to mopera U, you can use Internet after making In this mode, the functions of using radio the simple settings. mopera U is a service wave transmissions such as calling, requiring subscription. accessing to the Internet (including sending/ receiving mails), etc. are disabled. It can be Setting mopera U useful when you want to operate the terminal with no interruption of incoming calls or mails. 1 From the Settings screen (P.93), tap [Wireless & networks] X Turning on Airplane mode [Mobile networks] X [Access Point Names]. From the Settings screen (P.93), 1 tap [Wireless & networks]. Mark [mopera U (スマートフォン定 2 額)] (mopera U (Smartphone flat- Mark [Airplane mode] checkbox. rate))/[mopera U設定] (mopera U 2 ･ When you unmark [Airplane mode] settings) radio button. checkbox, the Airplane mode turns ･ Return to the Home screen and open off. the Browser. You can enjoy the nice Internet access.

Settings 95 Continued on next page ❖Information ❖Information ･ You can also switch on/off of the Airplane mode by ･ Make sure to receive enough signal strength for pressing and holding p for over a second to using Wi-Fi. The signal strength of the Wi-Fi switch to the Phone options menu, then tapping network varies by the location of the terminal. [Airplane mode]. Moving closer to the Wi-Fi router might enhance ･ Even if Airplane mode is on, Wi-Fi and Bluetooth the signal strength. function can be turned on. ■ Reception interference caused by Bluetooth devices About Wi-Fi Bluetooth devices and wireless LAN Using the Wi-Fi function, you can connect to (IEEE802.11b/g/n) use the same an access point for your home, company frequency band (2.4GHz). If you use network or public wireless LAN services to Bluetooth devices near a wireless LAN use mail and Internet. device, reception interference may occur ･ Even when Wi-Fi is on, packet or the communications speed may lower. communication is available. However, while Also, you may hear noise or have a you connect Wi-Fi network, Wi-Fi comes connection problem. Communication may first. be interrupted or sound may be lost while ･ When a Wi-Fi network is disconnected, streaming data, etc. In these cases, do connection is automatically switched to a the following: 3G/GPRS network. Note that packet ･ Keep the terminal and Bluetooth device communication fee applies for using 3G/ to be connected wirelessly over 10 GPRS network. meters away from a wireless LAN ･ Turn the Wi-Fi function to off when you do not device. use Wi-Fi to cut battery power consumption. ･ Within 10 meters, turn off the Bluetooth device to be connected. Before using Wi-Fi To use Wi-Fi, turn on Wi-Fi and search available Wi-Fi network, then connect it. ･ To access the Internet using Wi-Fi, connect to Wi-Fi network in advance.

Settings 96 ❖Information Turning on Wi-Fi ･ The next time you connect to a Wi-Fi network, the 1 From the Settings screen (P.93), security key is saved in the terminal. tap [Wireless & networks]. ■ Wi-Fi network status icons on status Mark [Wi-Fi] checkbox. bar 2 ･ The terminal scans for available Wi-Fi The following icons appear according to networks. the Wi-Fi network connection status.

❖Information Appears when connected to Wi-Fi network. ･ It may take a few seconds before the Wi-Fi Appears when connected to Wi-Fi network connection is on. using AutoIP function. Appears when any open network within the service area is detected*. Connecting to a Wi-Fi network * Without connected to Wi-Fi network, you need to set Wi- From the Settings screen (P.93), Fi Network notification to ON beforehand. (P.98) 1 tap [Wireless & networks] X [Wi-Fi settings]. Disconnecting a Wi-Fi network ･ Available Wi-Fi networks are From the Settings screen (P.93), displayed under "Wi-Fi networks". The 1 tap [Wireless & network] X [Wi-Fi available networks may be open or settings]. secured. This is indicated by or next to the Wi-Fi network name. Touch and hold the Wi-Fi network 2 that you are connected to. 2 Select Wi-Fi network you want to connect, tap [Connect]. 3 Tap [Forget network]. ･ If you are trying to connect to a protected Wi-Fi network, you are asked to enter the security key for that Wi-Fi network before you can connect to it.

Settings 97 Tap a Wi-Fi network in the list to Wi-Fi network status 4 connect to it. When you are connected to a Wi-Fi network or when there are Wi-Fi networks available in Advanced Wi-Fi settings your vicinity, you can see the status of these Wi-Fi networks. You can also set the terminal Before you add a Wi-Fi network manually, you to notify you when an unsecured Wi-Fi need to turn on the Wi-Fi setting. (P.97) network is detected. Adding a Wi-Fi network manually

Setting the Wi-Fi network From the Settings screen (P.93), notification to ON 1 tap [Wireless & networks] X [Wi-Fi Confirm that Wi-Fi is turned on, settings]. 1 and then on the Settings screen Tap [Add Wi-Fi network]. (P.93), tap [Wireless & networks] X 2 Enter [Network SSID] name of the [Wi-Fi settings]. 3 Wi-Fi network you want to add. Mark [Network notification] Tap [Security] field, then mark a 2 checkbox. 4 radio button of security type for Scanning for Wi-Fi networks the Wi-Fi network you want to add. manually ･ 4 options, "Open", "WEP", "WPA/WPA2 PSK", or "802.1x EAP", appear. 1 From the Settings screen (P.93), If required, enter security tap [Wireless & networks] X [Wi-Fi 5 information for the Wi-Fi network settings]. you want to add. t 2 Press . 6 Tap [Save]. Tap [Scan]. 3 ･ Scanning for Wi-Fi networks is started, and they are displayed under "Wi-Fi networks".

Settings 98 Viewing detailed information on a 2 Press t. connected Wi-Fi network 3 Tap [Advanced]. From the Settings screen (P.93), Tap [Wi-Fi sleep policy]. 1 tap [Wireless & networks] X [Wi-Fi 4 Tap any of [When screen turns off]/ settings]. 5 [Never when plugged in]/[Never]. 2 Tap the Wi-Fi network that you are currently connected to. Using a static IP address ･ The detailed network information is displayed. You can set up the terminal to connect to a ❖Information Wi-Fi network using a static IP address. ･ To check MAC address and IP address, [Wireless & networks] on the Settings menu screen (P.93) X Setting up a static IP address Tap [Wi-Fi settings], press t, and tap [Advanced] . From the Settings screen (P.93), 1 tap [Wireless & networks] X [Wi-Fi Wi-Fi sleep policy settings]. t By changing a Wi-Fi sleep policy, you can 2 Press . choose to disable the Wi-Fi function in the Tap [Advanced]. terminal when the screen backlight turns off. 3 Mark [Use static IP] checkbox. You can also set the terminal to always turn 4 ･ Item of IP settings can be selected. ON the Wi-Fi function or to turn it ON when the terminal is charged. 5 Tap an item to enter necessary ❖Information information. ･ When a Wi-Fi network is disconnected, connection ･ Enter "IP address", "Gateway", is automatically switched to a 3G/GPRS network. "Netmask", "DNS 1" to use a static IP address. Adding a Wi-Fi sleep policy Press t. From the Settings screen (P.93), 6 1 Tap [Save]. tap [Wireless & networks] X [Wi-Fi 7 settings]. Settings 99 From the Settings screen (P.93), Using tethering function 1 tap [Wireless & networks] X Tethering stands for using mobile devices [Tethering & portable hotspot]. such as smartphone as modem to allow USB Connect the terminal to a PC with a compatible devices or wireless LAN devices 2 microUSB cable (P.33). to access the Internet. ･ When you connect a USB cable for ❖Information the first time, driver software for the ･ Packet communication charge when using terminal is installed to the PC. Wait for tethering varies depending on the charging plan a while until installation is completed. you use. Subscription of packet flat-rate service is A confirmation screen for installation highly recommended. of PC Companion software appears If you subscribe packet flat-rate service, packet when the driver software installation is communication charge is treated as "communications connected to an external device completed. such as a PC". If tethering is enabled, all packet Tap [Skip]. communication charge is treated as 3 "communications connected to an external device ･ The terminal is connected to a PC in such as a PC" even if any external device is not "Media transfer mode (MTP)", USB connected. connection mode set by default. Make sure to deactivate tethering as soon as Tap [USB tethering]. communication with an external device is 4 completed. Check the cautions displayed, tap For details on usage charge, etc., refer to 5 [OK]. http://www.nttdocomo.co.jp/english/ ･ For the details on tethering, from the Settings ･ [USB tethering] is marked. screen (P.93), tap [Wireless & networks] X ❖Information [Tethering & portable hotspot] X [Help]. ･ System requirements (OS) for USB tethering are as Setting USB tethering follows. A required driver is automatically installed. - Microsoft Windows 7 Connecting the terminal to the included - Microsoft Windows Vista microUSB cable, and using it as a modem, - Microsoft Windows XP you can connect USB device to the Internet. ･ Set USB connection mode to "Media transfer mode (MTP)" when connecting the terminal and a PC using microUSB cable.

Settings 100 Setting up a portable Wi-Fi hotspot 3 Check the cautions displayed, tap You can use the terminal as Wi-Fi access [OK]. [Portable Wi-Fi hotspot] is marked. point to connect up to 5 wireless LAN devices ･ to the Internet simultaneously. ❖Information From the Settings screen (P.93), ･ If Wi-Fi tethering starts while connecting to Wi-Fi 1 network, Wi-Fi network is disconnected and tap [Wireless & networks] X automatically connected when Wi-Fi tethering ends. [Tethering & portable hotspot]. Alternatively, when the terminal and DLNA device Tap [Port. Wi-Fi hotspot settings]. are connected via Wi-Fi network, starting/ending Wi- 2 Fi tethering affects Wi-Fi connection. Enter [Network SSID] of the Wi-Fi ･ USB tethering and Wi-Fi tethering can be used at 3 hotspot to set. the same time. ･ By default, "SO-03D" is set. Connecting to a VPN (Virtual Tap [Security] field and mark the 4 radio button for the security type Private Network) of Wi-Fi hotspot to set. Virtual Private Network (VPN) is a technology ･ Either "WPA2 PSK" or "Open" appears. to connect to the information in a protected Enter security information of the local network from another network. 5 Wi-Fi hotspot to set as required. Generally, VPNs are provided to companies, schools and other facilities. A user can 6 Tap [Save]. access to the information in the local network from outside of the premises. Using Wi-Fi tethering To set up a VPN access from the terminal, you need to retrieve the information related to From the Settings screen (P.93), security from your network administrator. For 1 tap [Wireless & networks] X details, refer to [Tethering & portable hotspot]. http://www.sonyericsson.co.jp/support/ Tap [Portable Wi-Fi hotspot]. 2 ❖Information ･ If you set sp-mode as an ISP, you cannot use PPTP.

Settings 101 Adding a VPN If the dialog box appears, enter the 3 desired authentication information 1 From the Settings screen (P.93), and tap [Connect]. tap [Wireless & networks] X [VPN ･ When you are connected to a VPN, settings]. the connecting notification appears in Tap [Add VPN]. the status bar. When you are 2 disconnected, the notification Tap a VPN type to add. 3 indicating to return to the VPN setting If a setting screen appears, follow screen appears, so that you can 4 the instruction of the network reconnect to. For details, see "Status administrator to set required items bar" (P.36). of VPN settings. Disconnecting a VPN Press t, then tap [Save]. 5 ･ A new VPN is added in the list on VPN Open the Notification panel, tap settings screen. 1 the VPN connecting notification. ･ Tap a connecting VPN to disconnect. ❖Information ･ Added VPNs can be edited or deleted. To edit VPNs, touch and hold a desired VPN, then tap [Edit network]. Change the VPN settings, as Call settings required, press t and tap [Save]. To delete, touch and hold a VPN to be removed, You can use the network services and search then tap [Delete network] X [OK]. for available networks. Connecting to a VPN Network service P. 8 5 setting From the Settings screen (P.93), Service providers When you start using 1 tap [Wireless & networks] X [VPN overseas or move out of settings]. your operator's network, the terminal searches another Added VPNs are displayed in the list ･ available network and on the VPN setting screen. reconnects to it. 2 Tap a VPN to connect to. Settings 102 Continued on next page Noise suppression Make the voice clear to understand for the other Setting the terminal to silent party during a call. mode Accounts Set Internet phone (SIP) Press p for over a second. account. 1 ･ Phone options menu appears. Use Internet calling Set Internet phone (SIP) call method. 2 Tap [Silent mode]. ❖Information ･ Alternatively, you can set silent mode from the Sound Settings screen (P.93), tap [Sound] and mark [Silent mode] checkbox. Set ringtones, operation sound, vibrator, etc. ･ Setting the phone to silent mode does not mute sounds (playback of video or music, alarm, etc.) xLOUDTM Set audio playback level other than the ringtone, operation sound, and enhancement technology notification sounds. ("xLOUD") to enjoy powerful sounds with the built-in speaker when playing Setting the vibrator music, YouTube, Gallery, etc. 1 From the Settings screen (P.93), Silent mode P. 1 03 tap [Sound] X [Vibrate]. Vibrate P. 1 03 Tap any of [Always]/[Never]/[When Volume P. 1 04 2 sound is off]/[When sound is on]. Phone ringtone P. 1 04 Notification ringtone P. 1 05 Audible touch tones P. 1 05 Audible selection P. 1 05 Screen lock sounds Set sound ON/OFF when unlocking the screen. Haptic feedback Set whether to vibrate for some operations such as specified software key operation.

Settings 103 Adjusting the volume Adjusting the ringer volume 1 From the Settings screen (P.93), with the volume key tap [Sound] X [Volume]. From the Home screen, press up ･ Adjust the volume of following items. 1 or down of m. - Ringtone ･ The volume adjustment bar appears, - Media (sounds of the Music player you can adjust the volume up or and Gallery) down. -Alarm ❖Information - Notification ･ You can also press m or p to mute the Drag the slider left or right to ringtone for an incoming call. 2 adjust the level. ･ Drag the slider to the left for volume Setting a ringtone down, or to the right for volume up. From the Settings screen (P.93), Tap [OK]. 1 3 tap [Sound] X [Phone ringtone]. ❖Information 2 Select a ringtone and tap [Done]. ･ By default, Notification volume is adjusted to the ･ You can set voice file in ".wav", ".m4a" same as Ringtone volume. To adjust Ringtone and or in other format which is transferred Notification separately, unmark [Use incoming call from Media Go (P.142) or downloaded volume for notifications] checkbox in Step 1. from the Internet as a ringtone. (P.167) Ringtone and Notification volume adjustment sliders appear, then drag each slider to the right or ❖Information left to adjust volume. ･ To set a ringtone other than the ones stored by default, you can also set from "Music library".

Settings 104 Selecting a notification Display ringtone Set brightness, orientation of the screen, etc. From the Settings screen (P.93), 1 tap [Sound] X [Notification Brightness P.105 ringtone]. Auto-rotate screen P.105 Animation P.106 Select a ringtone and tap [Done]. 2 Screen timeout P.106 ❖Information Theme P. 4 6 ･ To set a notification sound other than the ones stored by default, you can also set from "Music library". Adjusting the screen brightness Setting touch tones to ON 1 From the Settings screen (P.93), 1 From the Settings screen (P.93), tap [Display] X [Brightness]. tap [Sound]. 2 Drag the slider to the right or left. Mark [Audible touch tones] ･ Drag the slider to the left for dimmer 2 checkbox, [Audible selection] screen, or to the right for brighter checkbox. screen. ･ If you unmarked them, any operation Tap [OK]. tone does not sound when you touch 3 or tap. ❖Information Changing orientation of the ･ "Audible touch tones" is a tone for numeric key screen operations. "Audible selection" is a tone when selecting menu item. You can set the screen orientation to change ･ To set the key sound of software keyboard, from automatically between landscape and the Settings screen (P.93), tap [Language & portrait view when you turn the terminal keyboard], and select a type of software keyboard. sideways/paleways.

Settings 105 Continued on next page ❖Information ❖Information ･ Even when you change the orientation of the ･ To turn the screen backlight off immediately, press terminal, the screen may not change to landscape p. view depending on the screen such as Home screen, etc. Location & security Setting to change to landscape view Set options related to location information and security. From the Settings screen (P.93), 1 tap [Display]. Use wireless networks P. 1 75 Use GPS satellites P. 1 75 Mark [Auto-rotate screen] Set up screen lock P. 1 09 2 checkbox. Set up SIM card lock P. 1 08 Visible passwords Set whether to show the Setting animation effect to input character before transition "・" appears on the password entry screen. Set animation effect which shows transition of Select device Set whether to enable screen smoothly. administrators device administrators. From the Settings screen (P.93), Use secure credentials Allow applications to access secure 1 tap [Display] [Animation]. X certificates and other Select an animation option. credentials.*1 2 Install from SD card Install encrypted certificates from microSD Adjusting the idle time before card. the screen turns off Set password Set or change the credential storage*2 From the Settings screen (P.93), password. 1 tap [Display] X [Screen timeout]. Select a time option before the 2 screen backlight turns off.

Settings 106 Continued on next page Clear storage Delete all certificates and ･ If you forget any of your security codes, credential information you must bring your official identification from the credential (such as driver's license), the terminal, *2 storage and reset its and UIM with you to the nearest docomo password. Shop. For details, contact the "General *1 Set the password to the credential storage in advance. Inquiries" on the last page of this *2 Save certificates and credential information in the credential storage. manual. ･ The PUK code is written on the Protecting the UIM subscription form (copy for customer) handed at the subscription in the Some functions provided for convenient use docomo Shop. If you did not subscribe of the terminal require the security code to other than docomo Shop, you must use them. Besides the security code for bring your official identification (such as locking the terminal, the network security driver's license), the UIM with you to the code necessary for the network services etc. nearest docomo Shop or contact the are available. Make use of the terminal using "General Inquiries" on the last page of an appropriate security code according to this manual. the purpose. Network security code ■ Notes on the security codes ･ Avoid using a number that is easy to The network security code is a 4-digit number guess, such as "birth date", "part of your necessary for identification or using the phone number", "street address number docomo Network Services at reception of or room number", "1111", and "1234". your request in docomo Shop or at docomo Make sure to make a note of the security Information Center. It can be set any number code you set lest you should forget it. at the subscription and also changed later by ･ Be very careful not to let others know yourself. your security code. If your security code You can change your network security code is known by anyone else, DOCOMO to the new one using the PC if you have the shall have no liability for any loss due to "docomoID"/"Password" for the "My docomo"* any unauthorized use of it. General support site for PC.

Settings 107 Continued on next page * For information on "My docomo", see the PUK code previons page of the last page of this The PUK code is an 8-digit number for manual. canceling the locked PIN1/PIN2 code. The PUK code cannot be changed by yourself. PIN code ･ If you enter a wrong PUK code 10 times You can set a security code called PIN code consecutively, the UIM is locked. Please to the UIM. The code is set to "0000" at the contact a docomo Shop. time of subscription. It can be changed by yourself. Enabling the UIM PIN PIN code is a 4- to 8-digit number (code) that must be entered for user confirmation to By setting PIN (security code) and enter PIN1 prevent unauthorized use by a third party code when powered on, you can protect the every time you insert the UIM into the terminal UIM from improper use. or when the terminal is powered on. Entering From the Settings screen (P.93), the PIN code enables making/receiving calls 1 tap [Location & security] X [Set up and terminal operation. SIM card lock] X [Lock SIM card]. ･ When you purchase a new terminal and use Enter the PIN code of the UIM and the UIM that you have used on the current 2 tap [OK]. terminal by inserting to the new one, use the ･ [Lock SIM card] is marked. set PIN code on the former terminal. If you did not change the setting, the code is Entering the PIN code when "0000". powered on ･ If you enter a wrong PIN code 3 times consecutively, the PIN code is locked and On the PIN code entry screen, cannot be used anymore. In this case, 1 enter the PIN code of the UIM. unlock with "PUK". (P.108) 2 Tap [OK].

Settings 108 Continued on next page ❖Information ･ Even if you do not unlock the SIM card lock, you Screen lock can make an emergency call by tapping You can secure your data by requiring a [Emergency call] on the unlock SIM card lock screen unlock pattern every time the terminal screen displayed after unlocking the screen. For details, see "Emergency call" (P.71). is turned on or every time it is activated from sleep mode. Changing the PIN code There are 3 types of screen lock settings: ･ You can change the PIN code when the UIM "Pattern", "PIN" and "Password". (P.109) PIN is enabled. ❖Information From the Settings screen (P.93), ･ You can use Key lock (P.34) to prevent unintended 1 tap [Location & security] X [Set up operation or save the power consumption of the terminal without setting screen lock. SIM card lock] X [Change SIM PIN]. Enter the current PIN code of the Setting screen unlock pattern 2 UIM and tap [OK]. From the Settings screen (P.93), Enter the new PIN code of the UIM 1 tap [Location & security] X [Set up 3 and tap [OK]. screen lock]. Enter the new PIN code and tap Tap [Pattern]/[PIN]/[Password]. 4 [OK]. 2 ･ When you tap [Pattern], follow the onscreen instructions to enter screen Unblocking the locked UIM unlock pattern. Set security question and answer in On the PUK code entry screen, case you forget the pattern. 1 enter the PUK code and tap [OK]. ･ When you tap [PIN], follow the 2 Enter the new PIN code of the UIM onscreen instructions to enter 4 or and tap [OK]. more numbers. This "PIN" code is Enter the new PIN code and tap different from a PIN code to be set to 3 [OK]. UIM (P.108).

Settings 109 Continued on next page ･ When you tap [Password], follow the Unlocking the screen onscreen instructions to enter 4 or y p more characters including alphabets. Press or to activate the 1 terminal. Changing the screen unlock Unlock the key lock, then enter the method 2 screen unlock pattern. ･ Enter preset screen unlock pattern, From the Settings screen (P.93), PIN or password. 1 tap [Location & security] X [Change screen lock]. ❖Information ･ Enter current screen unlock pattern, ･ Even if you do not unlock the screen lock, you can PIN or password. make an emergency call by tapping [Emergency ･ If you should fail 5 times when you call] on the unlock the screen lock screen displayed after unlocking the screen. For details, enter the unlock pattern, wait see "Emergency call" (P.71). 30 seconds and then try again. 2 Tap [Pattern]/[PIN]/[Password]. If you forget how to unlock ･ Select items you want to change into. ■ If you set "Pattern" For setting procedure, see Step 2 "Incorrect pattern" appears when you (P.109) of "Setting screen unlock enter incorrect unlock pattern 5 times pattern". consecutively. ･ Tap [Next], then mark [Answer Locking the screen question], then tap [Next], and then Once screen unlock pattern (P.109) is set, answer the question made when the keys and screen are locked when the unlock pattern was set so that you can terminal enters in the sleep mode or when unlock screen. p is pressed. ･ If you registered Google account, on the "Incorrect pattern" screen, tap [Next], then mark [Enter Google account details], then tap [Next], and then enter Google account and password to unlock screen.

Settings 110 Continued on next page ❖ Information Running services Display/Manage the currently ･ Tap [Try again] to retry entering pattern in 30 running services. seconds. Storage use Display size of all applications, ･ Alternatively, when you tap [Try again] X [Forgot usage condition, etc. pattern?], the question screen that you set unlock Display operations which has pattern appears. Battery use been using the battery. ･ You can set multiple Google accounts. To unlock the screen with Google account and password, Development Set options for application enter one of those accounts. development.

■ If you set "PIN"/"Password" Please contact a docomo Shop. Permitting downloading unknown source's application Canceling screen lock Before you can download unknown source's You can cancel screen lock pattern after you applications, set the terminal to enable set. downloading. 1 From the Settings screen (P.93), Applications you download may be of tap [Location & security] X unknown origin. To protect your terminal and [Change screen lock]. personal data, only download applications ･ Enter preset screen unlock pattern, from trusted sources such as the Android PIN or password. Market etc. 2 Tap [None]. From the Settings screen (P.93), 1 tap [Applications]. Applications 2 Tap [Unknown sources]. Read the cautions appeared, tap You can set options related to application 3 [OK]. display and management. ･ [Unknown sources] checkbox is Unknown sources P.111 marked. Manage P.112 applications

Settings 111 Checking downloaded applications 1 From the Settings screen (P.93), You can check data downloaded from tap [Applications] X [Manage websites, such as unknown source's applications]. applications, in the following steps. 2 Tap an application to view. From the Home screen, tap Scroll down the screen to view 1 [Browser]. 3 permitted operations. ･ If all permitted operations do not Press t, tap [More] X appear, tap [All]. 2 [Downloads].

❖Information Shutting down an application ･ Alternatively, you can tap from the home If a pop-up window that indicates the screen X [Downloads] to check applications. application does not reply appears, you can ･ Applications downloaded from Android Market do not appear. force quit the application. 1 From the Settings screen (P.93), Managing your applications tap [Applications] X [Manage applications]. Manage and delete installed applications, display memory usage condition, etc. or 2 Tap an application to force-quite. change the settings. 3 Tap [Force stop]. Viewing permitted operation of the 4 Read the cautions displayed, tap applications in the terminal [OK]. You can check functions which are permitted ❖Information to each application to access in the progress ･ If you do not want to shut down the application, tap of performing, such as network [Cancel] and wait for a reply of the application. communication function or location ❖Note information function of the terminal. ･ If you cancel the "status bar" of application forcibly, operations may not be performed correctly.

Settings 112 Deleting all data of the application When uninstallation is completed, 5 tap [OK]. ･ Before deleting all installed application data, back up contents related to the ❖Information application that you want to save including ･ You may not uninstall the applications pre-installed data saved in the application. in the terminal. ･ Applications can be deleted from the Applications 1 From the Settings screen (P.93), screen. For details, see "Uninstalling applications" tap [Applications] X [Manage (P.55). applications]. Deleting cache of the application Tap an application to delete the 2 data. From the Settings screen (P.93), 1 tap [Applications] X [Manage Tap [Clear data]. 3 applications]. Tap [OK]. 4 2 Tap an application to delete cache. Deleting an installed application 3 Tap [Clear cache]. ･ Before deleting installed application, back up contents related to the application that Keeping the screen ON while you want to save including data saved in the charging application. ･ Some applications cannot be deleted. From the Settings screen (P.93), 1 tap [Applications] X From the Settings screen (P.93), [Development]. 1 tap [Applications] X [Manage applications]. 2 Mark [Stay awake] checkbox. 2 Tap an application to be deleted. 3 Tap [Uninstall]. 4 Tap [OK].

Settings 113 Follow the registration wizard, set Accounts & sync 2 a Google account. ･ If you have no Google account, create You can manage (add or delete) online an account. service accounts or synchronize contacts, ･ If you have already the Google messages, etc. saved in online services with account, sign in. the terminal. ❖Information Background data All the applications installed to ･ You can use the terminal without creating your traffic the terminal perform automatic Google account, however the services such as data communications. Google Talk, Gmail, Android Market, etc. are not Activate auto- Synchronize online information available. sync such as your Gmail, calendar, ･ To sign in, you need a Google account and a contacts, etc. automatically. password. (P.116) ･ If you set a Google account, you can tap your Manage accounts P. 1 14 Google account displayed on the "Accounts & sync" screen in the setting menu to manually synchronize data from the following items.

Managing accounts Sync Contacts Synchronize contacts stored in You can add or delete an online service Gmail with the phonebook stored in the terminal. account. Sync Gmail Synchronize Mail logs used in Setting Google account Gmail account with Gmail on the terminal. You can create a Google account on your Sync Calendar Synchronize calendar information terminal and use Google services such as such as schedule, etc., stored in Gmail, Google Talk, Google Calendar, Google account with Calendar in Android Market, etc. the terminal. You can set multiple Google accounts on the ･ If you set a Google account and use Picasa in it, "Sync Picasa Web Albums" appears. Tapping to terminal. synchronize displays Picasa Web Album in the From the Settings screen (P.93), Gallery on the terminal. 1 tap [Accounts & sync] X [Add account] X [Google].

Settings 114 Continued on next page ･ Make sure to check if the data connection is Enter your login information. available before sign-in to the Google account. For 2 ･ If you have no Facebook account, checking the data connection status, see "Status register an account. icons" (P.36). ･ If you have Facebook account, login.

Setting Facebook account ❖Information When you register or sign in Facebook, you ･ If you have set a Facebook account, 2 Facebook can synchronize (register/update) profile icons and set mail address are displayed on the information published by "Friend" online to "Accounts & sync" screen in the setting menu. Tap a Facebook icon, (Sony Ericsson Facebook for Contacts. mobile), and tap the following items to synchronize You can display image posted on Facebook and display corresponding data. by "Friends" onto the Gallery or Photo filter in Sync Calendar Synchronize events such as Contacts, display information stored in "いい Friends' birthdays, etc., stored in ね (Like)" on the Interests filter in Contacts, Facebook with Calendar in the and display Facebook updates of "Friends" in terminal. Timescape. Sync Albums Display images posted on ❖ in Gallery Facebook onto Photo filter in the Information contact information filter or onto ･ If you do not have a Facebook account, you can the album in Gallery of the also create a new account at terminal. http://www.facebook.com. Sync Contacts Synchronize profile of Friends If you download and install client applications for ･ stored in Facebook with the Twitter, mixi, you can setup accounts and phonebook stored in the terminal. synchronize contacts information in the same manner as Facebook. ･ If synchronizing process is not completed, follow the onscreen instructions to drag the status bar From the Settings screen (P.93), downward and tap the notification, then tap [OK] 1 tap [Accounts & sync] X [Add on the connection screen. Synchronization will account] X [Facebook]. complete. ･ If you already have a Facebook account and set account from Phonebook or Timescape of the terminal, you need not add a new account.

Settings 115 Setting other account Data synchronization ■ Exchange Active Sync account Synchronize online information such as your ･ If you have Exchange ActiveSync Gmail, calendar, contacts, etc. to the account, on the settings screen (P.93), terminal. You can display and edit information tap [Accounts & sync] X [Add account] on the terminal or a PC. X [Exchange Active Sync], and then set the settings according to the onscreen ❖Information instructions. ･ You need to set your online service account such as Google account, etc. on the terminal to ■ docomo account synchronize. You can set to synchronize manually ･ docomo account helps you to use or automatically through use of background data. "Phonebook backup" service (P.52) provided by NTT DOCOMO. a docomo Setting automatic synchronization account is set by default. From the Settings screen (P.93), 1 tap [Accounts & sync]. Deleting a service account Mark [Background data traffic] From the Settings screen (P.93), 2 checkbox. 1 tap [Accounts & sync] and select a service account you want to 3 Tap [Activate auto-sync]. delete. 4 Read the cautions displayed, tap Tap [Remove account] X [Remove [OK]. 2 account]. ･ [Activate auto-sync] checkbox is marked. ❖Information Tap an online service whose ･ The first set Google account cannot be removed 5 from "Remove account". To remove the first set account is set. Google account, reset the terminal. For details on how to reset, see "Resetting the terminal" (P.117).

Settings 116 Continued on next page Tap to mark an item for automatic 6 synchronization. Privacy ･ If the items to be synchronized are Restore the terminal to default. marked and checkboxes are led by , synchronization starts. If no Factory data Reset the terminal. appears, press t and tap [Sync reset now] to start synchronization. ❖Note Resetting the terminal ･ If you mark [Background data traffic] checkbox, all the applications installed to the terminal are Resetting the terminal deletes all data, permitted automatic data communications to including downloaded applications and online services whose accounts are set. And, if you Google accounts, and resets the terminal mark [Activate auto-sync] checkbox, your Gmail, back to the initial (default) state. Make sure to calendar, contacts, and profile information back up important data you have on the published by "Friend", etc. are permitted automatic terminal before you reset the terminal. data communications by Google account. These communications may cause you to pay packet For the initial settings, see "Initial settings communications charges. (Setup guide)" (P.35). ･ If you do not mark [Activate auto-sync] checkbox, you can synchronize manually. On the settings 1 From the Settings screen (P.93), screen (P.93), tap [Accounts & sync], tap the tap [Privacy] X [Factory data reset] service where your account is set to display the X [Reset phone]. synchronizing items, then tap items you want to ･ Mark [Erase SD card] checkbox to synchronize. delete all contents on the microSD Canceling synchronization card. ･ Enter your screen unlock method as During synchronization required. 1 ( appears in the status bar), Tap [Erase everything]. press t. 2 ･ By tapping [Erase everything], the 2 Tap [Cancel sync]. terminal restarts automatically.

Settings 117 Continued on next page ❖Note ･ While restarting or resetting the terminal, wait for a Managing memory while. Note that, if you remove the battery pack while restarting or resetting, it may cause Formatting a microSD card malfunction of the terminal. From the Settings screen (P.93), 1 tap [Storage] X [Unmount SD Storage card]. ･ If the confirmation screen appears, You can check memory space of microSD tap [OK]. card and terminal, and initialize microSD Tap [Erase SD card]. card. 2 Tap [Erase SD card] again, and tap Total space Check memory of microSD card. 3 [Erase everything]. Available Check memory space of microSD space card. ❖Information Unmount SD Cancel recognition of microSD ･ Formatting a microSD card deletes all the data in it. card* card to remove it safely. Mount SD Recognize microSD card. Confirming how much space left is card* on a microSD card and the terminal Erase SD card P.118 From the Settings screen (P.93), Available Check memory space of the 1 space terminal. tap [Storage]. ･ The total volume and free space of the * Display changes depending on condition of microSD card recognition. microSD card appear at the top of the screen, and the free space of the terminal appears at the bottom of the screen.

Settings 118 Increasing the free volume of the ❖Information terminal and a microSD card ･ If you choose the wrong language and cannot read the menu texts, go to If the terminal has a small memory, you can http://www.sonyericsson.co.jp/so-03d/faq.html do the following to increase the available for help. memory: ･ In the browser, you can clear all temporary Internet files and browser history Voice input & output information. For details, see "Clearing You can set Google voice recognizer and history" (P.137). Text-to-speech settings. ･ Uninstall programs that you no longer use. For details, see "Deleting an installed ■ Voice recognizer settings application" (P.113). Language Select language used for Google voice search. SafeSearch Set filter explicit. Language & keyboard Block Set whether to display recognized offensive offensive voice results. You can select language and keyboard input. words

Select language P.119 ■ Text-to-speech settings User dictionary Register words. International keyboard P. 6 5 Listen to an Playback sample of audio synthesis. example Japanese keyboard Always use Overwrite application settings with my settings content of "Default Engine", "Install Changing the phone language voice data", "Speech rate", "Language" and "Pico TTS". From the Settings screen (P.93), 1 Default Set audio synthesis engine to read tap [Language & keyboard] X Engine out text. By default, "Pico TTS" is set. [Select language]. Install voice Install voice data required to voice Select a language. data synthesis. If voice data is not 2 installed, connect to Android Market to search voice data. Speech rate Set speed at reading out text.

Settings 119 Continued on next page Language Set language for reading out text. Pico TTS* Make settings for installed voice Date & time synthesis engine. You can change the date and time in the * Japanese is not supported. terminal. To set date, time zone and time manually, Accessibility unmark "Automatic" time setting (Use network-provided values) under Date & time You can set call end operation and user settings. support service which sounds or vibrates Automatic Adjust date, time zone, and according to user's operation. time automatically by using ❖ network-provided Information information. ･ A user support application is not installed by Set date P. 1 20 default. For the first time of use, install a screen reader for terminal from the Android Market Select time zone P. 1 21 according the onscreen instructions. Set time P. 1 21 ･ To use Android Market, you need to set Google Use 24-hour format P. 1 21 account (P.114). Select date format P. 1 21 Accessibility Set user support service ON/OFF. Power button Set to end a call by pressing p. ends call Setting the date From the Settings screen (P.93), 1 tap [Date & time] X [Set date]. 2 Tap numbers to adjust the date. 3 Tap [Set]. ❖Information ･ Correction of the time differences may not be performed correctly depending on the overseas telecommunication carrier. In that case, set time zone manually (P.121).

Settings 120 Setting the time zone Setting the date format From the Settings screen (P.93), From the Settings screen (P.93), 1 tap [Date & time] X [Select time 1 tap [Date & time] X [Select date zone]. format]. 2 Tap an item to set. 2 Tap an item to set.

Setting the time About phone

From the Settings screen (P.93), You can check your own phone number, 1 tap [Date & time] [Set time]. X signal level, legal information, etc. Tap numbers to adjust the hour Software update P.201 2 and minute. Status Check your own phone ･ When you unmark [Use 24-hour number, signal level, etc. format] checkbox, you can change Battery use Display operations which AM/PM. When you tap [AM], it have been using the battery. changes to [PM] (or vice versa). Legal information Check license agreement, Tap [Set]. terms of use, etc. 3 Model number Check version and number. Android version Setting the time format Baseband version From the Settings screen (P.93), Kernel version 1 tap [Date & time] and mark/unmark Build number [Use 24-hour format] checkbox. ･ Mark the checkbox to shift to 24-hour format, and unmark to shift to 12-hour format.

Settings 121 Mark the checkbox of the recipient l/Internet i Ma sp-mode mail 3 you want to send a message from the contact list. You can send/receive mails using i-mode ･ If a name or phone number is entered mail address (@docomo.ne.jp). in the box at the top of the screen, a You can use pictogram and Deco-mail. Mails list of contacts beginning with the can be received automatically. For details on entered numbers or letters appears. sp-mode mail, refer to "ご利用ガイドブック･ Alternatively, you can enter a phone (sp ) Mobile Phone User's Guide [sp- モード編 number in the box at the top of the mode] (in Japanese only)". screen, then tap [Add] to add a 1 From the Home screen, tap [spモー recipient. ドメール (sp-mode mail)]. Tap [Done]. ･ After this step, follow the onscreen 4 instructions. Tap [Write message] field and 5 enter a message. ･ When the number of entered Message (SMS) characters comes close to a limit, a counter appears on the upper left of Using a mobile phone number as the the text box and you can check the recipient address, you can send and receive remaining entry space. text messages up to 70 two-byte characters Tap [Send]. (160 one-byte characters). 6 ❖Information Sending message (SMS) ･ For the character entry, see "Character entry" (P.56). 1 From the Home screen, tap , ･ You can also send/receive text messages to/from then tap [Messaging]. customers of overseas network operators. See "Mobile Phone User's Guide [International Tap [New message] [Add 2 X Services]" or the DOCOMO International Services recipient]. website.

Mail/Internet 122 Continued on next page ･ To send SMS to users of overseas network Press t, then tap [Edit operators, enter "+", "Country code" and then "the 3 recipients]. recipient mobile phone number". Enter the phone number without a leading "0", if any. You can also Tap the phone number you want to enter "010", "Country code" and "the recipient 4 add to a contact. mobile phone number" to send messages (To reply to the received SMS overseas, enter "010"). On the Sending screen, tap 5 , then tap [Create new Receiving and reading contact]. messages (SMS) Tap [docomo]/[Phone contact]. 6 ･ When you set Google account etc., it From the Home screen, tap , appears as a saving location. 1 then tap [Messaging]. Enter required items and tap Tap someone whose messages 7 [Done]. 2 you want to read from the recipient list. ･ A received message appears. Adjusting messages (SMS) settings ❖Information ･ When you receive a message (SMS), appears From the Home screen, tap , on the status bar. To read the message, drag the 1 then tap [Messaging]. status bar downwards, then tap the notified message (SMS) item. Press t, then tap [Settings]. 2 ･ You can set the following options. Saving a number in a received Delivery report Mark to mark a message thread message to a contact you sent each time a recipient receives the message. From the Home screen, tap , Notifications Mark if you want to receive a 1 then tap [Messaging]. notification in the status bar when a new message arrives. Select a thread whose phone 2 Notification Set if you want to receive a number you want to save. tone notification in selected ringtone when a new message arrives.

Mail/Internet 123 Continued on next page t Notification Set if you want to receive a 2 Press , then tap [Delete vibration notification by vibration when a several]. new message arrives. Tap [Mark all] X [Delete]. SIM messages Manage messages saved to UIM. 3 ･ After tapping [Mark all], you can tap Push settings Reports of message settings can individual thread to unmark. Tap be received from the provider. [Unmrk all] to unmark all of the threads. Deleting a message From the Home screen, tap , Email 1 then tap [Messaging]. You can create an email account provided by Tap a thread to select. 2 mopera U mail, a POP3 or IMAP compatible Touch and hold a message you email account provided by general service 3 want to delete. providers, or an Exchange ActiveSync account to send or receive email. 4 Tap [Delete message] X [Yes]. Setting up an email account Deleting thread Email setup wizard appears. Set according 1 From the Home screen, tap , the onscreen instructions. Multiple email then tap [Messaging]. accounts can be set. 2 Touch and hold a thread to delete. 1 From the Home screen, tap , 3 Tap [Delete conversation] X [Yes]. then tap [Email]. Enter your email address and 2 password. Deleting all threads 3 Tap [Next]. 1 From the Home screen, tap , ･ To make the email account settings then tap [Messaging]. manually, tap [Manual setup] and follow the onscreen instructions.

Mail/Internet 124 Continued on next page Enter account name and a name Enter the email address of 4 you want to display on outgoing 3 recipient. mails. ･ Tap to display the Contacts list ･ If "What type of account is this?" screen to select among the registered appears, tap an email account type contacts. and follow the onscreen instructions to ･ If you enter an alphabet or a name, set. email address options appear from ･ If you set an Exchange ActiveSync the contacts beginning with the account, name to be displayed on entered character. outgoing messages cannot be set. ･ To add a Cc or Bcc, press t and tap [Add Cc/Bcc]. Tap [Done]. ･ If you enter characters directly for 5 ･ Inbox for set email account appears. multiple email addresses, separate ❖Information with a comma (,) and then enter the ･ If you need to make the settings manually, contact next email address. your email service provider or system administrator ･ The sender name of a received email for the correct email account settings. is the name set on sender's terminal. ･ If you set an Exchange ActiveSync account as email account, and if server manager sets Remote Enter a subject. wipe, the data saved in the terminal may be 4 deleted. Enter a message text. ･ Emails are not displayed in Timescape. 5 To attach a file, tap [Add 6 attachment] and attach a file in the Creating and sending an email following steps. message Add picture Select a file from the saved image From the Home screen, tap , file list. 1 then tap [Email]. Take photo Start the camera to take a photo and attach it. Tap [New mail]. 2 Add video Select a file from the saved video file list. Record video Start the camera to record a video and attach it.

Mail/Internet 125 Continued on next page ❖ Add sound Select music: Select a saved Information music file. ･ If you set "Email notifications" in Account settings Sound Recorder: Record a voice (P.128) and set "Inbox check frequency" to an item message and attach it. other than "Manual", appears in the status bar when you receive a new message. Drag the status ･ Only image/video/music file (up to 5 bar downwards to read the message. MB) can be attached to email. ･ If you set "Inbox check frequency" in Account Tap [Send]. settings (P.128) to an item other than "Manual", and 7 if you are using the pay-as-you-go data communication, you may be charged every time ❖Information you check your email. ･ You can save the message as a draft by tapping ･ If you tap the address of a received email, you can [Save draft]. Also, when you move to the other register it in a contact. If it has been already screen while creating a mail, the mail is registered, you can display the details. automatically saved as draft. ･ Tap (gray) to turn (yellow) on the mail ･ In sent/received emails, a communication data is message screen to add the marked mail to also included other than text and image displayed "Starred" on the email screen. From "Starred", you on the screen and charges will apply to the data. can quickly access to the mail you have marked. ･ Email is handled as an email from a PC. You If is not shown on the mail message screen, cannot send or receive email if "Reject emails from tap to show. PCs" is set on a recipient terminal. ･ When phone memory becomes low, a message indicating low memory space appears and Receiving and reading the receiving emails is not available. Delete saved messages etc. to make available memory space. email Changing Inbox view 1 From the Home screen, tap , then tap [Email]. From the Home screen, tap , ･ When an account list appears, tap 1 and then tap [Email]. and select an email account to ･ When an account list appears, tap an receive. email account you want to use for On the inbox, press t, then tap receiving mail to select. 2 [Refresh]. 3 Tap the email.

Mail/Internet 126 Continued on next page Press t, then tap [Preview 2 pane]. Replying to or forwarding ･ You can set the following options. emails Off Inbox is not shown piecewise. 1 From the Home screen, tap , On Tap in portrait view or in then tap [Email]. landscape view to cut the Inbox to ･ When an account list appears, tap show the selected mail body. and select an email account whose email you want reply or forward. ❖Information ■ Replying ･ If you have two or more accounts, change made in t any of the accounts applies to all accounts. Tap an email X Press and tap [Reply] or [Reply all] X Enter text, then tap [Send]. Saving email message attachment ■ Forwarding Tap an email X Press t and tap 1 From the Home screen, tap , [Forward] X Enter recipient email then tap [Email]. address X Enter text, then tap [Send]. ･ When an account list appears, tap and select an email account whose ❖Information attachment you want to save. ･ On the mail message screen, you can also tap X (Reply)/ (Reply all)/ (Forward) to reply Tap an email. or forward an email. 2 ･ The attachment list appears ･ When you reply or forward an email, the original underneath the message field. message contents for replying or forwarding is quoted. To delete the quoted message text, tap Tap [Save] of a file you want to . 3 save. ･ When you forward an email, the attachment file of the original message is quoted. To cancel quoting ･ The attached file is saved on the attached file, tap . microSD card. ･ You can also touch and hold the email to reply or ･ You can display attachment files by forward an email. tapping [Open].

Mail/Internet 127 Press t, then tap [Account Deleting an email message 2 settings]. 1 From the Home screen, tap , ･ You can set the following options. then tap [Email]. Account Change account name. ･ When an account list appears, tap name and select an email account whose Your name Change your name (sender name). email you want to delete. Signature Change your signature. Touch and hold an email, then tap Inbox check Set whether to check new 2 [Delete]. frequency messages automatically and intervals of automatic check. ❖Information Default Set to the default account to send ･ To delete multiple emails at the same time, tap account email, if you set two or more email checkboxes at the left of the mails you want to accounts. delete and then tap at the bottom of the Email Set whether to show email arrival screen. notifications notification in the status bar. ･ To delete email while sending, press t and tap Select Set ringtone when receiving an [Folders] X [Outbox], touch and hold a mail you ringtone email. want to delete and then tap [Discard]. Vibrate Set whether to vibrate when receiving an email. Changing the settings for an Incoming Set mail server for receiving. email account settings Outgoing Set mail server for sending. From the Home screen, tap , settings 1 then tap [Email]. When an account list appears, touch ･ ❖Information and hold an account that you want to ･ You can also set "Inbox check frequency", "Sync change the settings and tap [Account contacts", and "Sync calendar" for an Exchange settings], then go to Step 2. ActiveSync account. "Outgoing settings" cannot be set. ･ If you set "Inbox check frequency" to other than "Manual", and if you are using the pay-as-you-go data communication, you may be charged every time you check your email.

Mail/Internet 128 ❖Information Adding an extra email account ･ If you need to make the settings manually, contact From the Home screen, tap , your email service provider or system administrator for the correct email account settings. 1 then tap [Email]. ･ If you set an Exchange ActiveSync account as ･ When a screen other than account list, email account, and if server manager sets Remote press t and tap [Accounts]. wipe, the data saved in the terminal may be deleted. Press t, tap [Add account]. 2 ･ Press t on the inbox and tap [Accounts] to Enter your email address and display the email screen and set account list. All received mails for the set accounts are shown in 3 password. ･ the "Combined Inbox" on the email screen. ･ If required, mark [Send email from this ･ Tap an account name to open the inbox for account by default.] checkbox. selected account alone. ･ Emails are not displayed in Timescape. Tap [Next]. 4 ･ To make the email account settings manually, tap [Manual setup] and Removing an email account follow the onscreen instructions. from the terminal Enter an account name and name From the Home screen, tap , 5 you want to display on outgoing 1 then tap [Email]. messages. ･ When a screen other than account list, ･ If "What type of account is this?" press t and tap [Accounts]. appears, tap an email account type Touch and hold the account to be and follow the onscreen instructions to 2 removed, then tap [Delete account] set. X [OK]. ･ If you set an Exchange ActiveSync account, name to be displayed on outgoing messages cannot be set. Tap [Done]. 6 ･ Inbox for set email account appears.

Mail/Internet 129 Check that you have entered [User Using mopera U mail 4 name] and [Password] for mopera mopera U users (for the setting, see "Setting U correctly, and [mail.mopera.net] mopera U" (P.95)) can use mopera U Mail. for the POP3 server. In mopera U Mail, POP mail and IMAP mail ･ If you tap [Next] in Step 2, are available. The mail box supports 50 MB. "mail.mopera.net" is entered in the Also, the Web mail system is available. POP3 server field.

■ POP mail Select the security type. 5 ･ If you do not select it, tap [Next] to go From the Home screen, tap , to Step 8. 1 then tap [Email]. ･ If you have already set an email 6 On the security selection screen, account, operate the following mark the security radio button to operations. be used. - When an account list appears, Confirm the entry, then tap [Next]. press t and tap [Add account]. 7 Enter [mail.mopera.net] for the - When a screen other than account 8 SMTP server and confirm the entry list appears, press t and tap of [User name] and [Password] for [Accounts], and then press t mopera U. and tap [Add account]. ･ If you tapped [Next] in Step 2, to 2 Enter mopera U mail address and confirm the entry of [User name] and mopera U password, then tap [Password] for mopera U, mark [Manual setup]/[Next]. [Require sign-in]. ･ If you tap [Next], it changes ･ If you tap [Next] in Step 2, automatically to POP3 account. Go to "mail.mopera.net" is entered in the Step 4. SMTP server field. Set "587" in the Port 3 Tap [POP3] from the type of the field. mail account. 9 Tap [Next].

Mail/Internet 130 Continued on next page On the option setting screen, set On the inbox, press t and tap 10 frequency of checking Emails etc. 2 [Refresh]. and tap [More]. ･ Synchronizing Gmail application in the terminal with your Gmail account On the mail account registration starts, and the Inbox is refreshed. 11 screen, enter a name you want to display on outgoing messages, ❖Information then tap [Done]. ･ For details of Gmail, press t on the Gmail ･ The mailer is displayed and the set screen, then tap [More] X [Help] to view the mail account is available. mobile help.

❖Information ･ If [Require sign-in] is not marked on the SMTP Google Talk (Chat) server setting screen, mail cannot be sent. Mark [Require sign-in]. You can use Google Talk instant messaging to chat with friends. To use Google Talk, you need to make settings of your Google Using Gmail account. For details, see "Setting Google account" (P.114). If you have a Google account, you can send/ receive emails by using Gmail on your terminal. If you have no Google account, see Sign in and online chat "Setting Google account" (P.114). Signing in Google Talk ❖Information Signing in is unnecessary if you have already ･ Gmail messages are not displayed in Timescape. set a Google account. Refreshing Gmail From the Home screen, tap , 1 then tap [Talk]. From the Home screen, tap , 1 then tap [Gmail]. Tap [Next] X [Sign in], enter your 2 user name and password. 3 Tap [Sign in].

Mail/Internet 131 Continued on next page ❖Information ･ For details of Google Talk, on the Google Talk Receiving Early warning "Area screen, press t, then tap [Settings] Mail" X [Terms & privacy] X [Help Center] (Talk Help is displayed in English). When terminal is in service area, Area Mail is sent automatically. Receive an Area Mail Early warning "Area Mail" 1 automatically. Early warning "Area Mail" is a service with When you receive an Area Mail, which you can receive earthquake early 2 dedicated ringtone sounds and the warning, etc. delivered by the Meteorological notification LED blinks. Agency. ･ Dedicated ringtone sounds for 10 ･ Area mail is a free service for which seconds. subscription is not required. ･ Ringtone and ringtone volume cannot ･ You cannot receive Area Mails in the be changed. following case. An Area Mail message appears - During a voice call 3 automatically. - Out of service area - When power OFF Viewing received Area Mail later - During International roaming - In Airplane mode 1 From the Home screen, tap , - During updating software then tap [Area Mail]. - When using UIM by a carrier other than Select an Area Mail you want to NTT DOCOMO 2 view from the Area Mail list. - During sending or receiving messages ･ You can view the Area Mail message. (SMS) ･ You may not be able to receive Area Mails while tethering is set or if packet Setting Early warning "Area communications are used. Mail" ･ Area Mail that could not be received cannot From the Home screen, tap , be received later. 1 then tap [Area Mail]. Mail/Internet 132 Continued on next page Press t, then tap [Settings]. t and tap [Settings] X [Display], then mark 2 [Auto-rotate screen] checkbox. Receive Area Set whether to receive Area Mails. Mail Moving to a web page Register Area To receive Area Mails other than Mail early warning, register the name On the Browser screen, press of Area Mail about which you 1 s. want to receive information and Message ID. Up to 20 items can 2 Using the keyboard, enter the web be registered. page address or keyword to be Sound in silent Set whether to sound a dedicated searched for. mode ringtone even in silent mode. ･ As you enter an address or Sample screen Check the ringtone when an characters, retrieved web pages list & sound earthquake early warning or Area appears. Mail for disaster/evacuation information is received. Tap the displayed candidates list 3 or . ❖Information ･ You can move the web page. ･ If the UIM is not inserted, you cannot set Area Mail. ❖Information ･ You can tap to enter search words by voice and search a web page. Using Browser Going back to the previous page Opening Browser 1 Press x. 1 From the Home screen, tap [Browser]. Exiting Browser ❖Information Press y. ･ You can view the browser screen turning the 1 ･ All open windows are closed and terminal sideways. If the screen orientation does not change automatically when you turn the Browser ends. terminal sideways, from the Home screen, press

Mail/Internet 133 Zooming in/out a web page Displaying web pages To zoom in/out a webpage, perform any of Browser offers advanced features that let you the following operations. view web pages like on a PC. ･ Double-tap at the point you want to zoom in/ out. Opening a new browser window ･ Pinch-out at the point you want to zoom in or You can open up to 8 browser windows. pinch-in at the point you want to zoom out. While viewing a web page, press ･ Tap the zoom control icon (the zoom control 1 t, and tap [New window]. icon may appear when you drag in any ･ A new browser window opens in the direction on the screen). default home page. Zoom out Zoom in Switching between browser windows ❖Information You can easily switch from one website to ･ Web pages created to fit to the screen cannot be another by opening several windows. zoomed in/out. On the Browser screen, press Searching for text within a web 1 t, then tap [Windows]. page 2 Tap a browser window you want to While viewing a web page, press view. 1 t, then tap [More] X [Find on page]. Closing a browser window ･ The search bar appears in the upper part of the screen. On the Browser screen, press 1 t, then tap [Windows]. Enter the search item. 2 As you enter, matching characters are Tap on the browser window ･ highlighted in green. 2 you want to close. Back to the previous matched item Go to next matched item

Mail/Internet 134 Continued on next page 3 Tap to close the search bar. Auto-fitting a web page Adjust display size of web pages Copying text from a web page automatically to fit the screen. While viewing a web page, press 1 On the Browser screen, press 1 t, then tap [More] X [Select t, tap [More] X [Settings] X text]. Mark [Auto-fit pages] checkbox. Place your finger at the start of the ❖Information 2 text you want to copy and then ･ Some web pages cannot be adjusted drag to the end of the text you want automatically. to copy. Adjusting Browser settings ･ Copied text is highlighted in orange. Take your finger away from the On the Browser screen, press 1 t 3 screen and tap the selected text. , tap [More] X [Settings] to set ･ After copying text is completed, a Browser settings and options. message "Text copied to clipboard." Setting the home page appears. To paste text in an email, text 1 On the Browser screen, press 4 message or multimedia message, t, tap [More] X [Settings]. touch and hold the text box on a Tap [Set home page], enter URL message or email and tap [Paste] 2 you want to set as the home page, in the menu. tap [OK].

❖Information ❖Information ･ On some web pages, selecting characters may not ･ The URL set as the home page appears when available. opening a new browser window.

Mail/Internet 135 Operating links Managing bookmarks and history Operating links in web pages You can check history and store many Open the web page you want to bookmarks on the terminal. 1 operate the links. Bookmarking a web page 2 To open the web page, tap the link. ･ The links get enclosed in an orange On the Browser screen, go to the box when selected. 1 web page you want to bookmark. ･ If you touch and hold the link, the t menus, "Open", "Open in new 2 Press , then tap [Bookmarks]. window", "Bookmark link", "Save link", ･ A list of bookmarks appears. "Share link" and "Copy link URL", ･ You can also access the list screen by appear. When you touch and hold an tapping on the right side of the image or a link contained image, URL. "Save image", "View image" and "Set ･ You can switch thumbnail view and t as wallpaper" also appear. To share List view by pressing on the the link via email, Bluetooth function, bookmark list screen. Gmail or message, tap "Share the ■ Thumbnail view link". Tap [ ★ Add] on the upper left of the ･ Browser recognizes some phone screen X Edit the name of bookmark, if numbers that allow you to call the required, and tap [OK]. phone number. Tap the phone number ■ List view to call. Tap [Add bookmark...] on the top of the ･ When you download a file by "Save screen X Edit the name of bookmark, if link" from websites which require required and tap [OK]. Basic authentication or SSL session, the downloading may be failed.

Mail/Internet 136 Continued on next page ❖Information Checking browsing history ･ You can also bookmark the page by pressing t and tapping [Bookmark last-viewed page] in the On the Browser screen, press bookmark list screen. 1 t, then tap [Bookmarks] X ･ Tap [Most visited]/[History] tab in the bookmark list [History] tab. screen and tap on the right side of the record. turns into and the web page is added to the Tap the time you browsed the web bookmark list. 2 page, such as [Today], [Yesterday], etc. Opening a bookmark ･ To open the web page, tap an item. On the Browser screen, press ･ To check your most visited web 1 t, then tap [Bookmarks]. pages, tap [Most visited] tab. ❖ Tap the bookmark you want to Information x 2 open. ･ You can also press and hold over a second on the Browser screen to check the history. ･ If you do not tap a bookmark but touch and hold it, the menus, "Open", Clearing history "Open in new window", "Edit bookmark", "Add shortcut to Home", 1 On the Browser screen, press "Share link", "Copy link URL", "Delete t, then tap [Bookmarks] X bookmark" and "Set as homepage", [History] tab. appear. Tap "Add shortcut to Home" to Press t, then tap [Clear create a shortcut on the Home screen. 2 history]. To share the link via email, Bluetooth ･ When you delete the history, a list in function, Gmail or message, tap "Most visited" tab is also deleted. "Share link". ❖Information ･ To delete temporary internet file such as cache, on the Browser screen, press t and tap [More] X [Settings] and then set each item from "Privacy settings" menu on the appeared screen.

Mail/Internet 137 le management le i Handling a file Transferring and moving F

Files in the terminal should be operated on data the file handling application. For example, to You can transfer and move images, music delete files saved in the microSD card, use data and some other data. Sharing some the deletion function of the applications such data may not be permitted due to copyright. as Music player or Gallery. With "Share" function of each application, you can exchange the files via Bluetooth or by Using microUSB cable email file attachment sending to/receiving By connecting the terminal and a PC with the from the other compatible devices. supplied microSD cable, you can exchange In addition, with the terminal connected to a data between the microSD card of the PC, you can move or delete files in the terminal and the PC. microSD card mounted on the PC. With PC Companion and Media Go, you can manage Using a microUSB cable to files between a PC and the terminal mutually. connect the terminal to a PC With "Sync Zone" of PC Companion, you can synchronize contacts in the terminal and 1 Connect the terminal to a PC using calendar with Outlook of a PC. a microUSB cable (P.33). ･ When you connect microUSB cable for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is completed. A confirmation screen for installation of PC Companion software appears when the driver software installation is completed.

File management 138 Continued on next page Tap [Skip]. ･ If you switch the USB connection mode to "Mass 2 ･ The terminal is connected to a PC in storage mode (MSC)" and connect to a PC, you "Media transfer mode (MTP)", USB can access the microSD card in the terminal as a removable disc. However accessing microSD card connection mode set by default. Follow on the terminal is not available and you may not use the onscreen instructions on the PC to functions or applications on the terminal such as access "Memory Card" in the terminal. Camera, Gallery and music player. ･ If you install PC Companion, you can use the ❖Information following applications on a PC for managing media ･ Drag the status bar when connecting and tap files, creating backup files, etc. when connecting [Connected in Media transf. mode] X the terminal and the PC. For details, check on the [Connectivity settings] to check connectivity or PC Companion screen after installation. change the following connection settings. Media Go P.142 Install PC Display PC Companion Support Zone Update software of the Companion installation wizard when terminal connecting to a PC. connected to a PC. (P.202) USB connection Select USB connection mode Sync Zone Synchronize calendar and mode from "Media transfer mode contacts between Outlook (MTP)"/"Mass storage mode and the terminal. (MSC)" when connected to a File Manager Check file type, update time, PC. location, etc. of microSD Auto connect in Automatically set USB card. MSC connection mode to "MSC" when connected to a PC. ･ When the terminal is connected to a PC, charging starts automatically. Tethering & Set terminal data portable hotspot communication via USB cable or as portable Wi-Fi hotspot. (P.100) Trusted devices Connect the terminal and a for wireless host device in a pair via Wi-Fi media transf. network. (P.141)

File management 139 Disconnecting the microUSB cable Dragging and dropping data on the safely terminal and a PC ･ Do not disconnect the microUSB cable ■ Media transfer mode (MTP) during data transferring. Otherwise, data Connect the terminal to a PC using may be damaged. 1 a microUSB cable. ･ If you connect the terminal in the Media ･ "Connected in Media transf. mode" transfer mode (MTP), make sure that data appears in the status bar. transfer is not in progress and just disconnect the microUSB cable. Drag and drop data that you have 2 selected between the terminal and ■ Mass storage mode (MSC) a PC. Drag the status bar downwards. ■ Mass storage mode (MSC) 1 ･ When "Connect your phone" is displayed, go to Step 4. When "Phone Connect the terminal to a PC using memory card connected" is 1 a microUSB cable. displayed, go to Step 2. ･ "Phone memory card connected" appears in the status bar. Tap [Phone memory card 2 connected]. Drag and drop data that you have 2 selected between the terminal and Tap [Disconnect]. a PC. 3 ･ "Connect your phone" appears in the status bar. ❖Information ･ You can transfer files using a microUSB cable on Disconnect the microUSB cable. 4 most devices and the following operating systems (OSs) that supports the USB mass-storage memory interface. - Microsoft Windows 7 - Microsoft Windows Vista - Microsoft Windows XP

File management 140 Right click the portable device Connecting the terminal to a PC 6 icon, then click "ネットワーク構成 on a Wi-Fi network (network composition)". If the terminal and a PC*1 are connected in a Click [次へ (Next)]. pair on a Wi-Fi network, automatic 7 On the terminal, tap [Pair]. connection/disconnection of microSD card 8 and a PC is enabled when the terminal user On the network composition of the comes in and out of the Wi-Fi area, You can 9 portable device screen of the PC, easily access to a microSD card inserted in click " 完了 (Done)". the terminal from a connected PC. Disconnect the microUSB cable. *1 Use Microsoft Windows 7 to make a pair 10 setting. Pair setting cannot be made under 11 From the Home screen of the Microsoft Windows XP, Microsoft Windows terminal, press t and tap Vista or other OS. [Settings], X [Sony Ericsson] X [Connectivity] X "Host name" (PC Connect a PC you want to set in a name) in the "Trusted devices..." 1 pair to a Wi-Fi network. field. Set USB connection mode of the Tap [Connect]. 2 terminal to "Media transfer mode 12 ･ The terminal and a PC are connected (MTP)". in "Media transfer mode (MTP)" on a Connect the terminal to a Wi-Fi Wi-Fi network, and you can exchange 3 network (P.97). data files. Connect the terminal to a PC using 4 a microUSB cable. ･ When a confirmation screen for installation of PC Companion software appears on the terminal, tap [Skip]. Make sure that "SO-03D" is 5 displayed as a portable device on the explorer of the PC. File management 141 Continued on next page ❖Information Installing Media Go ･ From the Home screen of the terminal, press t and tap [Settings], X [Sony Ericsson] X Connect the terminal to a PC using [Connectivity] to display "Host name" (PC name) in 1 a microUSB cable. the "Trusted devices for wireless media transfer" ･ "PC Companion software" screen field. Tap the host name and tap [Forget] to cancel appears. connection setting. Until "Forget" is tapped, the connection setting retains even if you connect/ Tap [Install]. disconnect repeatedly by coming in and out of a 2 ･ An Installer screen appears on the PC Wi-Fi area. screen.

Using Media Go On the Installer screen of PC, 3 select "English (U.K.)" or "English The Media Go computer application helps (U.S.)" X Click "Install". you transfer and manage media content in ･ After this step, follow the instructions the terminal and computer. on the screen. With Media Go, you can load music from a After the installation, on the "Sony CD to a PC and transfer to the terminal. 4 Ericsson PC Companion" screen You need one of these operating systems to of the PC, install "Media Go". use the Media Go application: ･ Microsoft Windows 7 ❖Information ･ Microsoft Windows Vista ･ You can also download Media Go from ･ Microsoft Windows XP, Service Pack 3 or http://www.sonyericsson.co.jp/mediago/. higher

❖Information ･ To transfer files, set USB connection mode to "Media transfer mode (MTP)" in advance when connecting the terminal and a PC using microUSB cable. ･ To learn more about how to use the Media Go application, see the help section in the main menu of the Media Go application.

File management 142 Transferring data using Media Go Using Bluetooth function Connect the terminal to a PC using 1 a microUSB cable. The Bluetooth function creates a wireless connection to other Bluetooth devices, for Drag the status bar down to check example, handsfree devices. A range within 2 the USB connection mode. 10 m, with no solid objects in between, is ･ When "Connected in Media transf. recommended. You must turn on the mode" is displayed, go to Step 5. Bluetooth function to communicate with When "Phone memory card Bluetooth devices. You may also have to connected" is displayed, go to Step 3. make pair setting for your phone and Tap [Phone memory card Bluetooth devices. 3 connected]. ❖Information Tap [Connectivity settings] X [USB ･ By default, Bluetooth function is OFF. If you turn 4 connection mode] X [Media Bluetooth on and then turn off the terminal, transfer mode (MTP)] X [OK]. Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on Select Media Go from the PC's automatically. 5 start menu and activate Media Go. ･ If you do not use Bluetooth function, turn it off to ･ Using Media Go, you can move files save the battery. between the terminal and the PC. ■ Reception interference caused by wireless LAN devices The terminal's Bluetooth function and wireless LAN devices use the same frequency band (2.4GHz). If you use the terminal near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. In these cases, do the following:

File management 143 Continued on next page ･ Keep the Bluetooth device over 10 meters away from a wireless LAN Entering the terminal's name device. You can name the terminal. The name ･ Within 10 meters, turn off either the appears on Bluetooth devices when you use Bluetooth device or the wireless LAN the Bluetooth function. device. Confirm that the Bluetooth * The terminal does not communicate 1 function is ON. wirelessly with all types of Bluetooth devices. Bluetooth DUN is not From the Home screen, press supported. 2 t. Tap [Settings] X [Wireless & Making the terminal detectable 3 networks] X [Bluetooth settings] X with the Bluetooth function ON [Device name]. 1 From the Home screen, press 4 Enter a name. t. 5 Tap [OK]. Tap [Settings] X [Wireless & 2 networks]. Making pair setting for the Mark [Bluetooth] checkbox. terminal and Bluetooth device 3 ･ appears on the status bar and Bluetooth function turns ON. By making pair setting for the terminal and another Bluetooth device, you can use the 4 Tap [Bluetooth settings]. device such as Bluetooth handsfree headset Mark [Discoverable] checkbox. etc. connecting to the terminal to make and 5 ･ Bluetooth devices can detect the receive calls. terminal for 120 seconds.

File management 144 Continued on next page Once you have made pair setting for your If necessary, enter the pass code terminal and a Bluetooth device, the setting is 5 (PIN). saved. When making pair setting for the ･ You can use a Bluetooth device that terminal and a Bluetooth device, you may has been paired. The pairing and need to enter a pass code (PIN). Your connection status appear below the terminal will automatically try the generic device name in the Bluetooth device pass code 0000. If this does not work, see list. the documentation of your Bluetooth device ･ Some Bluetooth devices make for the pass code used by your Bluetooth connections continuously after device. You do not need to re-enter the pass making pair setting. code the next time you connect to a paired ❖Information Bluetooth device already set. ･ Make sure that the Bluetooth function of the device for making pair setting is ON, and that the You cannot make pair setting for the terminal Bluetooth detection function is on. and two Bluetooth headsets. However, you ･ When you make pair setting with the Bluetooth can set it with two or more Bluetooth devices device supporting Secure Simple Pairing (SSP) if the same profile is not in use. The terminal function, a passkey appears on the screen. After checking the appeared passkey is correct, the pair supports the following Bluetooth profiles: setting is mode. A2 D P, AVR C P, H FP, H SP, OP P, P BA P an d SPP. Connecting the terminal with From the Home screen, press another Bluetooth device 1 t. From the Home screen, press Tap [Settings] [Wireless & X 1 t. 2 networks] X [Bluetooth settings]. Tap [Settings] X [Wireless & Tap [Scan for devices]. 2 networks] X [Bluetooth settings]. 3 ･ A list of Bluetooth devices detected appears. Tap a Bluetooth device name to 4 pair with the terminal.

File management 145 Continued on next page Touch and hold a Bluetooth device Tap [Disconnect]. 3 name that you are going to 4 ･ Tap the device name and tap [OK] on connect. the confirmation screen for ･ Touch and hold a device with "Pair disconnecting to disconnect. The with this device" displayed under the display under the device name device name. changes to "Paired but not connected" while the pair setting remains set. To Tap [Pair]. reconnect, tap the device name. 4 ･ Depending on the device type, connection status is displayed under the device name when pair setting is Deactivating the pair setting of completed. While connecting to a a Bluetooth device device, appears in the status bar. From the Home screen, press 1 t. Deactivating the connection of a Bluetooth device Tap [Settings] X [Wireless & 2 networks] X [Bluetooth settings]. From the Home screen, press Touch and hold the currently 1 t. 3 connected Bluetooth device name. Tap [Settings] [Wireless & X Tap [Disconnect & unpair]. 2 networks] [Bluetooth settings]. X 4 ･ Connection disconnects and the pair Touch and hold the currently setting is canceled. 3 connected Bluetooth device name. ❖Information ･ The device displayed under the ･ When the terminal is only set to pair with Bluetooth device name is paired with the device (not connected), "Unpair" appears. terminal and connected.

File management 146 Sharing files with DLNA devices via Connected devices (Media server)

With Media server, you can share media files with other client (DLNA: Digital Living Network Alliance) devices using Wi-Fi function. Set Wi-Fi connection (P.96) with another client device.

Setting Connected devices (Media server) From the Home screen, tap , 1 then tap [Connected devices].

2 Server Rename the terminal (server) information on a client device. Share Set to connect from client contents devices to the terminal via Wi-Fi. Pending Manage pending client devices devices. Registered Manage client devices devices registered to the terminal.

❖Information ･ Press t to set Wi-Fi connection or confirm Help.

File management 147 ･ Content files for some games preinstalled in Games Use the terminal as a the terminal are saved in the microSD card gaming console attached at the time of purchase. If you erase data in the microSD card or attach Use XperiaTM PLAY or PlayStation®pocket to another microSD card to the terminal, enjoy playing games with the terminal. downloading content files may start ･ Some games require downloading a large automatically when activating a game. volume of data before using, they may be ･ The terminal could become warm if you play downloadable only via Wi-Fi connection. In games for a long time. This condition is not that case, turn Wi-Fi connection to ON and abnormal. then download it. ･ The game keypad is designed for use of ･ When you try to download games from other games. If you use the game keypad for than Android Market, downloading may be applications other than games, the blocked because of security protection. To operations may be different from those of continue downloading, mark [Unknown games. sources] in the settings menu and then download again. (P.111) Using XperiaTM PLAY ･ Because content files for a lot of games are saved to the microSD card, do not the Use XperiaTM PLAY to enjoy playing many following operations while playing a game. kinds of games with the terminal. Playing the game may be interrupted. Slide out the gaming keypad. - Unmounting microSD card 1 ･ XperiaTM PLAY is activated, and the - Removing the back cover of the terminal game list screen appears. - Connecting the terminal to a PC and read/ write the microSD card Tap [XperiaTM PLAY Games]. 2 ･ The list of preinstalled games or downloaded games appear. Tap a game you want to play. 3 ･ Or press the directional buttons to select a tab or game, and press the ○ button to start a game.

Games 148 Continued on next page Press the button to go back to the ･ × ® previous screen. Using PlayStation pocket ･ Tap [More games] tab to display the Use PlayStation®pocket to enjoy playing list of downloadable games. games for PlayStation with the terminal. For the first time to tap [More games], From the Home screen, tap X a message confirming whether to 1 [PlayStation®pocket]. agree to the privacy policy appears. ･ A list of PlayStation®pocket games Tap [Agree]. appears. ･ Tap to search games for XperiaTM PLAY in the Android Market. Tap [All]/[Recently Played]/ 2 [Recently Added] tab, and then tap Operate a game. a game you want to play. 4 ･ The operation of the gaming keypad ･ Or press the directional buttons to varies by games. For details, refer to select a tab or game, and press the ○ Help etc. of each game. button to start a game. ❖Information ･ Press the × button to go back to the ･ When there is an incoming call, a game pauses previous screen. automatically and an incoming call screen ･ Tap to display website featuring appears. When a message (SMS) is received "PS Store". during a game, you are notified with notification sound or vibration (only when notification settings Operate a game. are set). 3 ･ The operation of the gaming keypad ･ To set whether to activate XperiaTM PLAY varies by games. For details, refer to automatically when you slide the gaming keypad, press the menu button or t on the game list Help etc. of each game. screen and tap [Settings]. ❖Information ･ Tap [More games] tab and press the menu button ･ When there is an incoming call, a game pauses or t, and then tap [Refresh], the list of automatically and an incoming call screen appears. downloadable games is updated to the latest one. When a message (SMS) is received during a game, ･ Alternatively, from the Home screen, tap , then you are notified with notification sound or vibration tap [Get games] to display the downloadable (only when notification settings are set). game list. ･ To set the background theme, operation sound, etc., press the menu button or t on the game list screen and tap [Settings]. Games 149 ons i cat i ■About the Copyright and Portrait rights

Appl Using the camera Objects, such as movies, still images, and sounds, recorded using the terminal are prohibited by the You can take a photo or record a video by copyright law from use without consent of the tapping the screen. You can hold the camera copyright holders, unless intended for personal use horizontally or vertically. Photos and videos or any other purpose permitted by law. Also, using are saved automatically in the microSD card. or transformation of other person's portrait or name without his or her permission may violate the portrait right. When you present recorded images or sounds Before using the camera in a public place such as on an Internet home page, make sure to be aware of the copyright and portrait ･ You must install a microSD card before you right. Note that some performances, shows, and use the camera. All pictures or videos that exhibitions may not allow photography, movie you capture on your terminal are stored on shooting, or sound recording even for personal use. Transmission of images related to copyright or the microSD card. You cannot take a photo beyond the scope provided in the copyright law is while the microSD card reads/writes data, not available. for example transferring a file from Media Go. Please be considerate of the privacy of ･ If you insert the microSD card used in the individuals around you when taking and sending photos using camera-equipped terminal into an i-mode compatible mobile mobile phones. phone, photos and videos shot by the If you cause the public any trouble using the terminal cannot be viewed. terminal, you may be punished under law or ･ Avoid copyright infringements when you regulations (for example, nuisance prevention handle photos taken with your terminal, e.g. ordinance). copy/edit. In addition, avoid rights infringements of portraits by using these photos without consent, altering them or by other means. Note that capturing or recording a stage performance, entertainment or exhibition may be prohibited even if for personal use.

Applications 150 f Shutter (Photo) Shooting screen and key Start/Stop recording (Video) operations g Flash mode h Select camera ■ Still image shooting screen i Video quality (Video) j Recording time for video (Video) a b c ❖Information d ･ Tap x to turn off the camera.

e Taking photos f

g h Taking photos ■ Video shooting screen From the Home screen, tap [メディ 1 ア (Media)] X [Camera]. g a c ･ If the still image shooting screen does d not appear, tap .

e Tap . 2 ･ The photo is taken as soon as focus is f set. The photo is automatically saved in the microSD card. j i h a White balance ❖Information b Record of location information (photo) ･ To take a photo using auto-focus function, touch c Settings and hold and release your finger when the d Recently shot log focus frame turns green and a beep sounds. The ･ Tap to switch to the playback screen for photo is taken as soon as you release the finger. If recently shot photos or videos. the focus frame turns red, auto-focus does not ･ Press t on the playback screen to display operate correctly. [Slideshow], [Share], [Delete], [Details], ･ Auto-focus cannot be operated if "Focus mode" [Set as]*1, [More]*1, [Edit movie]*2. (P.153) is set to "infinity". *1 Appears only on the photo viewing screen. *2 Appears only on the video playback screen. e Switch between still and video camera

Applications 151 Continued on next page ･ When you connect Stereo Headset with Microphone (sample), commercially available Changing the capturing earphone set or other Bluetooth device, shutter settings sound may be softer. From the Home screen, tap [メディ Taking a photo using in-camera 1 ア (Media)] X [Camera]. ･ If the still image shooting screen does On the shooting screen, tap not appear, tap . 1 (Select camera), and then tap [Front]. On the shooting screen, tap a 2 setting item icon. Tap . ･ The displayed setting icon changes 2 ･ The photo is taken as soon as focus is depending on the setting conditions. set. The photo is automatically saved ･ For setting items and icons, see "Still in the microSD card. camera settings" (P.153). ❖ Information Tap one of the options in the When using the in-camera, "Picture quality", "Color ･ 3 setting that you have selected. effect", "Camera setting", "Store location" and "Select camera" can be set. The in-camera does ･ The setting option icon displayed on not support other still camera settings (P.153). the shooting screen is changed to the selected one (Except for ). Adjusting Exposure value

On the shooting screen, tap 1 (Settings), and then tap a value (+2 - -2) in [Exposure].

Applications 152 Still camera settings Item Icon/Value Description Scene Portrait Settings are Item Icon/Value Description Settings mode optimized to give Focus Set focus controls. brighter and Settings mode Auto The camera warmer skin tones. automatically Landscape Shoot landscape focuses on a depicting trees selected subject. with vivid color The focus frame and focusing on turns to green distant objects. when focus is on. Night Shoot a crisp and Infinity Use when clear night scene. shooting at a Due to long distance. Focus on exposure time, be subjects far away. careful not to Subjects close to shake camera. the camera may Night Suitable for be blurred. portrait shooting persons Macro Auto focus for against the close-up photos. nightscape Exposure P.152 background. Due to long exposure Scene Use Scenes to quickly set up time, be careful mode the camera for various scene not to shake conditions. camera. Auto Adjust color shade Beach Reconstruct beach or brightness brightly and automatically. vividly. Action To shoot fast- Snow Reconstruct snowy moving object, scene brightly and shorten exposure vividly. time to minimize motion blurring.

Applications 153 Continued on next page Item Icon/Value Description Item Icon/Value Description Picture Select image sizes before Color Set special effect for shooting. Settings size shooting. An image with a Settings effect None Shoot without higher resolution requires special effect. more memory. Mono Shoot in ･ Aspect ratio is 4:3 only. monochrome. ･ For in-camera, VGA (0.3 megapixel) only. Sepia Shoot in sepia tone. 5M Pixels Approx. 5 megapixel image Negative Shoot negative/ size (2592×1944) positive in reverse. 3M Pixels Approx. 3 Solarize Shoot with megapixel image solarization effect. size (2048×1536) Camera Restore Reset the camera 2M Pixels Approx. 2 settings defaults settings to the megapixel image default. size (1600×1200) Store Tag photos location information for the 1M Pixels Approx. 1 location detail shooting spot. megapixel image You need to mark "Use wireless networks" size (1024×768) (P.175) or "Use GPS satellites" (P.175) checkboxes in "Location & security" VGA Approx. 0.3 settings beforehand. For details on megapixel image location information, see "About location size (640×480) services" (P.174). Picture Select the image quality ･ Location information enables to specify quality (compression rate for the shooting spot of the photo. recording image). An image Off Shooting location cannot be with a higher image quality viewed on a map. requires more memory. On When On is set, location Super fine Shoot in super information is added to the high quality. taken photo. Fine Shoot in high quality. Normal Shoot in standard quality.

Applications 154 Continued on next page Item Icon/Value Description Item Icon/Value Description White The white balance setting adjusts the Select Switch shooting camera between out- balance color balance according to the light camera camera (Back)/in-camera (Front). source. Back Shoot with out-camera on rear Adjust the color balance side of the terminal. Auto automatically to the light Front P. 15 2 source. Adjust the color balance for ❖Note Incandescent lighting like incandescent bulb. ･ Some settings cannot be used in combination with one another. Adjust the color balance for a Daylight sunny place. Adjust the color balance for Recording videos Fluorescent lighting like fluorescent. Adjust the color balance for a Recording videos Cloudy cloudy sky or shaded area. From the Home screen, tap [メディ Flash Set whether to turn on the flash when 1 mode shooting when lighting conditions are ア (Media)] X [Camera]. poor or when there is a backlight. ･ If the movie recording screen does Turn on the flash automatically not appear, tap . Auto according to the shooting Tap to start recording. condition. 2 On The Flash turns on. 3 Tap to stop the recording. Off The flash does not turn on. ･ The recording data is automatically Sometimes the video quality saved in the microSD card. can be better without a flash, ❖ even if lighting conditions are Information poor. Shooting a good photo ･ When you connect Stereo Headset with without using the flash Microphone (sample), commercially available requires a steady hand. earphone set or other Bluetooth device, starting/ stopping sound for recording may be smaller.

Applications 155 Recording videos using in-camera Drag at the left of the progress 3 bar to the right for starting point of On the shooting screen, tap cropping. 1 (Select camera), and then tap [Front]. Drag at the right of progress bar 4 to the left for ending point of 2 Tap to start recording. cropping. Tap to stop the recording. ･ Tap the screen to play the cropped 3 ･ The recording data is automatically part for check. saved in the microSD card. 5 Tap [Save]. ❖Information ･ Tap [Cancel] to return to the video ･ When using the in-camera, "Color effect", "Camera playback screen without saving the settings", "Video quality", and "Select camera" can edited video. be set. The in-camera does not support other video recording settings (P.157). ❖Information ･ Cropped videos are stored in the album in "Camera" (P.160). Cropping video Tap the recently recorded history displayed Changing the recording on the shooting screen to display video, and settings then press t and [Edit video] to crop the video partially. From the Home screen, tap [メディ 1 ア (Media)] X [Camera]. On the recording screen, tap the 1 ･ If the video recording screen does not shooting history to display video. appear, tap . t 2 Press , then tap [Edit video]. On the shooting screen, tap a ･ (Progress 2 setting item icon. bar) appears at the bottom of the ･ The displayed setting icon changes screen. depending on the setting conditions. ･ For setting items and icons, see "Video recording settings" (P.157).

Applications 156 Continued on next page 3 Tap an option in the selected Item Icon/Value Description setting. White Adjust the color balance for a ･ The setting option icon displayed on balance Daylight sunny place. the shooting screen changes to the Adjust the color balance for set one (Except for ). Fluorescent lighting like fluorescent. Adjust the color balance for a Video recording settings Cloudy cloudy sky or shaded area. Flash Use the photo light (flash) to shoot when Item Icon/Value Description mode lighting conditions are poor or when Color Set special effect for shooting. there is a backlight. Settings effect None Shoot without On The photo light turns on. special effect. Off The photo light does not turn Mono Shoot in on. Sometimes the video monochrome. quality can be better without a Sepia Shoot in sepia photo light, even if lighting tone. conditions are poor. Shooting a good photo without using Negative Shoot negative/ the photo light requires a positive in reverse. steady hand. Solarize Shoot with Video Select video size and maximum solarization effect. quality recording time before recording video. Camera Restore Reset the camera An image with a higher resolution settings defaults settings to the requires more memory. default. HD 720p format with 16:9 White The white balance setting adjusts the High aspect ratio, 1280×720 pixels balance color balance according to the light (30m) (Maximum recording time: source. Approx. 30 min.) Adjust the color balance ･ For in-camera, VGA format Auto automatically to the light with 4:3 aspect ratio (640× source. 480 pixels). Adjust the color balance for QCIF format with 4:3 aspect Incandescent lighting like incandescent Low ratio, 176×144 pixels bulb. (30m) (Maximum recording time: Approx. 30 min.).

Applications 157 Continued on next page Item Icon/Value Description Select Switch shooting camera between out- Playing multimedia content camera camera (Back)/in-camera (Front). You can play music files on "Music" and view Back Shoot with out-camera on rear photos and video files on "Gallery". side of the terminal. You can play photos and videos shot by the Front P.156 terminal, transfer files to a microSD card by connecting to a PC, and play multimedia ❖Note content of the following file formats ･ Some settings cannot be used in combination with one another. downloaded from the Internet. Type File format Sound MP3, 3GPP, MP4, AMR, AMRWB, Shooting screenshot SMF, XMF, WAV, iMelody, RTTTL/RTX, OTA, Ogg vorbis You can shoot a current displayed screen as Still image JPEG, GIF, PNG, BMP an image (screen shot). Video 3GPP, MP4 Shot screen shot can be displayed in "Pictures" album in the Gallery. For details on operations for copying files by connecting to a PC, see "Transferring and On the screen you want to shoot a moving data" (P.138). 1 screen shot, press p for over a second. ･ Phone options menu appears. Tap [Take screenshot]. 2 ･ A screen shot is taken and a notification message for saving location appears on the screen.

❖Information ･ By tapping [Share]/[Set as] on the shooting completion screen, you can share (send) the image via Bluetooth or email, or register as wallpaper or contact image.

Applications 158 Copyright protected content Using Stereo Headset with Avoid copyright infringements when you Microphone handle photos taken with the terminal, e.g. Connect the plug of Stereo copy/edit. In addition, avoid rights 1 Headset with Microphone infringements of portraits by using these (Sample) to headset connector of photos without consent, altering them or by the terminal. other means. Note that capturing or ･ Check the connecting direction to recording a stage performance, connect correctly. Wrong connection entertainment or exhibition may be prohibited may cause damage. even if for personal use. Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped Microphone mobile phones.

Switch

Headset connection jack

Applications 159 Continued on next page ❖Information 1 From the Home screen, tap [メディ･ When you listen to Music player with Stereo ア (Meida)] X [Gallery]. Headset with Microphone connecting to the ･ The following album list screen terminal, you can switch ON/OFF by pressing the appears by default. switch of Stereo Headset with Microphone. However, operation may differ depending on the Camera Photos and videos taken with the conditions of use. terminal ･ If receiving a call when using Stereo Headset with ･ It does not appear when no photo Microphone, music stops, and resumes when the nor video is taken. call ends. ･ If you signed in an online service available to be synchronized such as Viewing photos/videos Facebook and Picasa, online album with Gallery appears after synchronization. Tap an album you want to view. Use Gallery to view/play pictures, photos or 2 ･ A screen listing Photo/Video files in videos you take. Also, use Media Go to album appears. transfer content to the terminal's microSD ❖ card and to take content from an external Information device. For details, see "Using microUSB ･ When you tap an album, then tap in to the upper right of the screen, the cable" (P.138). albums sorted by date appear. When you tap the date album, the list of all files Viewing photo/video album appears. However, the files of selected date appear with the thicker frame than the other files. Photos and videos that you took or saved in ･ To display only videos in the list, set a widget on the microSD from a PC are displayed in an the Home screen and then tap of "Media shortcuts". album. Videos recorded by the terminal appear on the list screen. ･ Depending on the number of photos saved, it may take some times to load all photos on the screen.

Applications 160 ■ Album list screen Press t and tap the displayed 2 menu. b ･ You can perform the following a operations.

Share Select a transfer method and send c photos/videos. Delete Delete selected photos/videos. Details xDisplay title, type, date, album name, location, etc. Select all Select all files in album. a Camera album Deselect All Cancel all files in the album. b Camera button: Tap to activate the camera. More Rotate Left: Rotate a picture 90 c Album list degrees counterclockwise. Rotate Right: Rotate a picture 90 Operating Photo/Video files in degrees clockwise. Show on map: Display location album information included in the image on the map. On the photo/video file list screen, you can The items vary depending on the select files in the album to operate them at a selected file. time. Edit video Crop the video partially to save. 1 On the photo/video file list screen, ･ The items vary depending on the touch and hold a file. selected file. ･ The checkbox is marked and file is ･ Some items cannot be operated in selected. Tap another file in a row to some files. select two or more files. ･ Tap a selected file to unmark the checkbox.

Applications 161 Continued on next page ❖Information ■ Photo viewing screen of Gallery t ･ Press while selecting a file, tap [Share] X a [Play on Device] X [OK] to display Play on Device setting screen (if you do not connect to the Wi-Fi network, tap [Not connected] to open Wi-Fi setting screen). Connect to the Wi-Fi network, select a searched device from the list on the player device selection screen and tap [Play] to share the file between a DLNA device and the terminal. ･ For shared files, file size and the file type are not particularly limited, but may be limited by the b application to transfer. DRM content cannot be c shared. a Album information t ･ When you press before selecting a file, a file b Zoom out. near the center among several files displayed on c Zoom In. the screen is marked automatically. Note that once you select a file, a file near the center may not be ❖Information marked. ･ Press t on the playback screen to display ･ Press t on the photo viewing screen to operate "Slideshow", "Share", "Delete", "Details", "Set as", photo files individually. "More", "Set as wallpaper". * "Set as wallpape" only appears in the albums provided by an online service such as Facebook and Viewing photos Picasa. ･ The items vary depending on the selected file. 1 From the Home screen, tap [メディ･ From the photo viewing screen for the Facebook ア (Media)] X [Gallery]. album, you can post comments or "いいね (Like)" onto Facebook. 2 Tap an album. ･ A list screen of files in the album Starting a slideshow appears. While viewing photo, press t Tap a photo to view it. 1 3 and tap [Slideshow]. ･ A slideshow of the photos or first frames of videos in the album starts.

Applications 162 b Progress bar: Display the playback position in the Playing a video playback duration. c Marker: Playback position. Drag to change the From the Home screen, tap [ 1 メディ playback position. ア (Media)] X [Gallery]. d [Play/Pause] key e Tap an album. [Fast forward] key: Fast-forward the playing position. 2 ･ The file list screen in the album appears. appears on the moving Adjusting the volume of a video picture file. On the video playback screen, Tap a video to play it. 1 3 press m up or down. ❖ Information Fast forwarding and rewinding a ･ If the screen orientation does not change video automatically when you turn the terminal sideways, t from the Home screen, press and tap Drag the progress bar marker right [Settings] X [Display], then mark [Auto-rotate 1 screen] checkbox. or left. ･ Tap / to rewind/forward. ■ Video viewing screen of Gallery

Playing video with YouTube

YouTube is a free online video streaming service. You can play, search for and upload videos. ･ A packet communication charge is applied d when downloading or uploading video a e content using 3G network. b c a [Rewind] key: Move the frame to be played backward.

Applications 163 Playing YouTube video Playing YouTube videos in high 1 From the Home screen, tap , quality then tap [YouTube]. While playing a video, double-tap ･ When you use for the first time, agree 1 the screen to switch to the to "Terms of Service". landscape screen. ･ YouTube playback screen and list Tap the screen to display the play screen of videos appear. 2 control keys, then tap [HQ]. ･ You can also press t and tap [Browse] to select a video from each ❖Information category. ･ A video plays in high quality when Wi-Fi is connected. Tap a video to play it. 2 ･ To play video in high quality on 3G network, on ･ While playing a video, tap the screen YouTube screen, press t, then tap [Settings] to display the play control keys which and mark [High quality on mobile] checkbox. you can switch Play/Pause. Double- tap to switch landscape/portrait. In Searching for a video with landscape, drag the marker on the keywords progress bar at the bottom of the play screen left or right to change playing 1 On YouTube screen, press t point. and tap [Search]. x ･ Press to stop the playback, and Enter the search keyword. return to list screen of videos. 2 ･ To exit YouTube, press y. Scroll the result and tap a video 3 you want to play it. ❖Information ･ For movies with caption function which can display subtitles, "CC" appears on the playback screen in Deleting search history the landscape mode. For your first activation, tap On YouTube screen, press t "CC" to tap language for the subtitles. 1 and tap [Settings]. 2 Tap [Clear search history] X [OK].

Applications 164 ■ Music player screen Music player a e You can browse and listen to your music, playlists and podcasts using Music.

b Playing music f Tap on the Music player screen, you can c g browse and play audio content saved in d h microSD by detailed category. i j k ❖Note a Artist name, song title ･ Do not perform "Unmount SD card" while a track is b playing. Album art c [Previous] key: Go to the previous track, or to the From the Home screen, tap [メディ beginning of the track in the current playlist. 1 ア (Media)] X [Music]. d Progress bar: Resume playback from the ･ The Music player screen appears. specified point by dragging or tapping. e Select/Cancel "いいね (Like)" on Facebook. Tap . ･ Appears if you login to Facebook. 2 f Play/Pause key 3 Browse to a track by tapping g [Next] key: Go to the next track in the current Artists/Albums/Tracks/Playlists by playlist. category. h Track play time i Display the track list of artist/album/track/playlist. 4 Tap a track to play it. j Infinite button: Connect to Google, wikipedia or YouTube to display related information of the current track. k Display playing track and the list contains the track. ･ You can switch to play/pause the playing track, and change the track by tapping other track in the list.

Applications 165 Continued on next page ･ Touch and hold a track to display menu for Sharing a track sharing the track, adding to a playlist, registering incoming ringtone, deleting, etc. You can share (send) files by Bluetooth or ･ Tap [Save] to save the tracks displayed in the email attachment. list to a playlist. On the Music player screen, tap ･ Drag at the left side of tracks to change the 1 order of tracks in the list. . To add a track to the list, touch and hold a track ･ Tap a category in Artists, Albums, you want to add from Artists/Albums/Tracks/ 2 Playlists categories and then tap [Queue artist]. Tracks or Playlists. m : Adjust the volume. Touch and hold a track you want to t: Select "Sound settings"/"Equalizer"/"Set as 3 share. ringtone"/"Extensions" from the menu by pressing on the Music player screen. ･ To share two or more tracks, on the list ･ On the track list of each category, tap to select screen, press t, tap [Send "Send several"/"Delete several" from the menu. several] and mark taracks you want to ❖Information share (send). ･ You can return to the Home screen to perform Tap [Send]. another operation while listening to the Music 4 player in the background. To return to the playback Select sending method and send. screen of the Music player, from the Home screen, 5 tap [メディア (Media)] X [Music], or drag down ❖Information the status bar and tap the current track name in the ･ For shared (to be sent) files, file size and the file ongoing item. type are not particularly limited, but may be limited ･ If the Music player widget is displayed on the by the application to transfer. DRM content cannot Home screen, tap Play/Pause/ / . Tap the be shared. album art to display the playback screen of the Music player. Deleting a track

Adjusting the volume On the Music player screen, tap 1 . While playing a track, press m 1 up or down. Tap a category in Artists, Albums, 2 Tracks or Playlists.

Applications 166 Continued on next page Touch and hold a track you want to Creating a playlist 3 delete. ･ To delete two or more tracks, on the 1 On the Music player screen, tap list screen, press t, tap [Delete . several], then mark tracks you want to Tap [Playlists] X [Create new delete. 2 playlist]. 4 Tap [Delete] X [Delete]. Mark a track you want to add to the 3 playlist and then tap [Create]. Using a track as a ringtone 4 Tap [Name] entry box and enter a On the Music player screen of the playlist name, and tap [OK]. 1 Music player, press t. Playing Playlists Tap [Set as ringtone]. 2 On the Music player screen, tap 1 . Playlist 2 Tap [Playlists]. In Music player, playlists named "Newly ･ The following playlists appear by added", "Most played" and "Never played", default. are automatically created. You can also Newly added Display the list of tracks newly create new playlists with your desired tracks. added. You can use Media Go (P.142) to maintain Most played Display the list of frequently played your music library and create your own tracks. playlists. Playlists that you create yourself are Never played Display the list of available tracks stored on microSD in the terminal in the m3u which have not played wholly. format. You can connect the terminal to a PC using 3 Tap a playlist you want to play X the included microUSB cable to use a Tap a track. microSD card as a removal disk. For details, ･ The playlist plays from the track you refer to "Using microUSB cable" (P.138). tap.

Applications 167 TrackID Using TrackID results When a track has been recognized by TrackID is a music recognition service. You TrackID, you can recommend it, search for can search for title, artist and album name for related content for the track on YouTube, or a track you hear playing through a do some others. The track information loudspeaker. For best results, use TrackID in appears when a track is recognized after a a quiet area. You can recommend tracks to search, but also in a history list. others. You can also search for and view related content on YouTube. If you cannot use To use TrackID results TrackID, see "Wireless & networks" (P.93) to When a recorded track is recognized, the check the Internet connection. ･ track information appears. Tap one of the keys in the track information screen to Starting TrackID recommend to others, or view the track on From the Home screen, tap , YouTube. 1 then tap [TrackIDTM]. ･ To view the track information, tap the desired track in the history list, or tap [Charts] and view the optional chart. Searching for the track information Start TrackID, then hold the Using Android Market 1 terminal towards the music source. With Android Market, you can access to Tap [Record]. useful applications or fun games directly 2 ･ The track information appears in the which you can download and install on the result screen. terminal. And you can send feedback and ･ To return to the TrackID start screen, comments about an application, or report press x. objectionable application or incompatible application with the terminal as an inappropriate content.

Applications 168 Continued on next page ･ To use Android Market, you need to set ･ Some applications automatically perform packet Google account (P.114). communications. Packet communication is kept active unless you disconnect it or the time-out is ･ Some applications and games are free of occurred. To disconnect packet communication charge, and the others are paid. In the manually, from the Home screen, press t and applications list of Market, distinction tap [Settings] X [Wireless & networks] X [Mobile between free and paid is clearly specified. networks], then unmark [Data enabled] checkbox For details on purchasing, returning and by tapping. refunding of paid applications, see "Help" ･ Some applications may be updated automatically. (P.169). Help Opening Android Market When you need help or have any questions about Android Market, open Android Market, From the Home screen, tap , press t then tap [Help]. The Browser 1 then tap [Market]. opens the Android Market Help web page. ･ When you open Android Market for the first time, the Terms of Service for Android Market window appears. Tap [Accept]. Using docomo market

❖Information In the docomo market, you can quickly ･ Be sure to check the security of application, then access DOCOMO recommended sites and install it at your own risk. The terminal may be useful applications. infected with a virus and the data may be damaged. ･ NTT DOCOMO is not liable for malfunctions, if any, Opening the docomo market caused by the application you installed. In such From the Home screen, tap , case, the repair is charged even during the 1 warranty period. then tap [docomo market]. ･ NTT DOCOMO is not liable for any disadvantage ･ The browser is activated and docomo brought to you or any third party due to an market is displayed. application you installed.

Applications 169 Continued on next page ❖Information TM ･ To use docomo market, Internet connection by Timescape packet communication (3G/GPRS) or Wi-Fi is required. Sony Ericsson TimescapeTM (hereinafter ･ For accessing docomo market or downloading referred to as Timescape) displays various applications introduced in docomo market, a information such as received messages packet communication charge is applied (SMS), Facebook, Twitter or mixi updates, separately. Some downloaded applications automatically perform packet communications. etc. in chronological order. You can see a tile ･ The introduced applications on docomo market preview of events before choosing to view the include charged ones. full content. With (infinite button), you can ･ NTT DOCOMO is not liable for any disadvantage view all communication information related to caused by introduced websites on docomo market the registered contacts. (P.173) or the acquired information from the website. ･ And NTT DOCOMO is not liable for contents, ❖Information adequateness to purpose of use, reliability, etc. of ･ To make best use of Timescape, you can set up applications introduced on the docomo market. your social networking service (SNS) account. ･ Some applications that you perform installation ･ Note that, you cannot view emails of Gmail or other may give the terminal instability of the operation, or Email application accounts in Timescape. may send your location information or personal ･ If you do not have a Facebook account, you can information registered to the terminal to outside via create a new account at http://www.facebook.com. the Internet and the information may be used ･ If you do not have a Twitter account, you can improperly. Please thoroughly check a provider create a new account at http://www.twitter.com. and operation status of the application etc. which ･ If you do not have a mixi account, you can create a you want to use beforehand and then use it. new account at http://mixi.jp. ･ The copyrights of materials (documents, ･ You can check the update of set Facebook, Twitter photographs, illustrations, animations, sounds, or mixi by Timescape. software, etc.) on this Site are the possession of DOCOMO or other third parties and are protected by the Copyright Act as well as other laws and agreements. Excluding the extent of quotation and reproduction for private use that is approved in the Copyright Act, without the consent of the party owing the copyright, the reproduction, adapting or public transmission of copyrighted material is prohibited.

Applications 170 Setting up Timescape Timescape screen ･ The first time you start Timescape, a setup wizard will guide you the necessary steps to a set up account. From the Home screen, tap , 1 then tap [TimescapeTM]. b ･ The Timescape screen appears. 2 Tap a tile. c 3 If you want, enter your Facebook/ Twitter/mixi account information. a Latest comment: Display the latest comments Tap [Done]. posted to Facebook/Twitter/mixi. 4 ･ To narrow the services to post down, use filter. b ❖ Tile: Display various information such as missed Information calls, received SMS, Facebook, Twitter or mixi ･ Timescape also can be started by tapping friend's updates are displayed in chronological under the Timescape widget. order. ･ In the setup wizard, tap [Extension search] on the c Filter: Tap a filter item to narrow the information account registration screen to connect to Android down to a certain type. Market and search new services for Timescape. ･ Display order of filters may differ. ･ After completion of setup wizard, you can change the settings. On the Timescape screen, press Scrolling through tiles in t and tap [Settings]. Timescape ･ If the screen orientation does not change automatically when you turn the terminal sideways, Drag a tile up and down. from the Home screen, press t and tap 1 [Settings] X [Display], then mark [Auto-rotate screen] checkbox. Previewing tiles in Timescape ･ If the automatic update of Facebook/Twitter/mixi is set, you can check information update sooner; Select a tile to view the content on the tile. however, the battery runs out quickly. To save the Tap a tile. battery, set to manual update. 1

Applications 171 Posting to Facebook, Twitter, mixi Filter icons from Timescape

Filter Icon Displayed tile In the Timescape screen, press All tiles 1 t and tap [Update status]. Received SMS Mark the service you want to post Missed calls 2 and tap [Continue]. Updates from your Twitter contacts Updates from your Facebook contacts 3 Enter the text and tap [Post]. Updates from your mixi contacts Tile icons Filtering the displayed tile The following icons on a tile indicate a type of Tap the filter icons on the event. 1 Timescape screen. Icon Event Refreshing the start screen in A missed call: Tap the tile to call the Timescape caller. An SMS message: Tap the tile to When you refresh the start screen, the display the message. terminal connects to the Internet to update A Twitter update: Tap the tile to display information from your Twitter, Facebook and the update. mixi account set in Timescape. A Facebook update: Tap the tile to display the update. In the Timescape screen, press A mixi update: Tap the tile to display 1 t and tap [Refresh]. the update.

Viewing a tile information

On the Timescape screen, tap a 1 tile.

Applications 172 Calling back from Timescape when Viewing the registered information you have a missed call of contacts in Timescape

On the Timescape screen, tap On the Timescape screen, tap a 1 tile. 1 tile. Tap the tile again. Tap . 2 2 ･ Communication logs and information Tap [Return call XXXXXXXX]. 3 related to the selected tile by event appear. Flick the filter at the bottom of Replying to an SMS message in the screen to switch displayed Timescape information. On the Timescape screen, tap 1 tile. Setting Timescape 2 Tap the tile again. Displaying the Timescape setting 3 Enter a message text. screen 4 Tap [Send]. On the Timescape screen, press 1 t, then tap [Settings]. ･ You can set the following operations. The infinite button in Timescape Update mode Set your Twitter/Facebook/mixi account information to be updated When you tap a tile, (infinite button) may manually/automatically when appear in the upper right corner. By tapping Timescape is activated. , you can view the communication log by TimescapeTM Change a content type displayed registered information in the contacts or tile content in Timescape. filter event. Set up Set Facebook/Twitter/mixi account services and search new services for Timescape.

Applications 173 ･ Use the GPS system with great care. About location services DOCOMO is not liable for any damage caused by abnormality of the system. There are two ways to find your location, ･ Note that DOCOMO shall have no liabilities using Mobile networks with Wi-Fi (Wireless for any purely economic loss including network) or GPS. Wireless network those due to missing a chance to check the technology determines your position fast but measurement (communication) results accuracy may vary. If you use GPS because of external factors (including the technology it may take a little longer, but it will running out of the battery), such as a failure, find your exact position. You can enable both malfunction, or any other problems of the Wireless network and GPS to benefit from terminal or the power failure. both technologies when trying to find your ･ You cannot use the terminal as a navigation position. device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities GPS Function whatsoever even if you suffer damage or loss while performing a navigation using the The terminal has a GPS receiver that uses location information. satellite signals to calculate your location. ･ You cannot use the terminal as a high- Some GPS features use the Internet. Data accuracy measurement GPS. Note that rates and charges may apply. DOCOMO shall have no liabilities When you use functions that require the GPS whatsoever even if you suffer damage or receiver to find your location, make sure you loss due to a deviation of the location have a clear view of the sky. If the GPS information. receiver does not find your location after a ･ The GPS signals cannot be easily received few minutes, you should move to another near a vehicle's sun visor with metal parts. location. To help the search, stand still and do not cover the GPS/Wi-Fi/Bluetooth antenna section (P.25). The first time you use the GPS it may take up to 10 minutes before your location is found.

Applications 174 Continued on next page ･ GPS is operated by the U.S. Department of ･ In buildings-clustered or residential area Defense. The department controls the ･ Near a high-voltage cable accuracy of the system, and manages the ･ Bad weather such as heavy rain or snow system. Therefore, GPS radio wave ❖Note condition may be controlled (degradation of ･ If some of the GPS functions are not available, or if accuracy, suspension of radio wave none of them are, check that your contract transmission, etc.) at the discretion of the includes the use of the Internet, and see "Wireless U.S. Department of Defense. & networks" (P.93). ･ Some wireless communications products ･ NTT DOCOMO is not liable for navigation services (mobile phone, data detectors and some or for the accuracy of location services. others) block satellite signals and also Enabling GPS function causes instability of signal reception. ･ Some map displays based on location From the Home screen, press t information (latitude/longitude information) 1 and tap [Settings]. may be not accurate due to some countries' Tap [Location & security]. or regions' regulations. 2 Mark [Use GPS satellites] ■ Where radio waves are difficult to 3 checkbox. receive Note that radio waves may not be received or 4 Read the note and tap [Agree]. it may be difficult to receive radio waves in the following conditions, since GPS uses Enabling Wireless network to find radio waves from a satellite. your position ･ Inside or immediately under a building ･ Enable to search a current location using ･ Inside a bag or box mobile network and Wi-Fi. ･ Inside or under a thick covering of trees t ･ In a car, inside a train compartment 1 From the Home screen, press ･ When there are obstructions (people or and tap [Settings]. objects) near the terminal Tap [Location & security]. ･ Inside a basement or tunnel, and below the 2 Mark [Use wireless networks] ground or water 3 checkbox.

Applications 175 Continued on next page Read the note and tap [Agree]. ･ Only using 3G/Wi-Fi connection may not detect 4 some locations. Read the note on location ･ Google may provide updated service or function. 5 information and tap [Agree]. From the Home screen, tap . ･ Wireless network users' location 1 information is stored without Tap [Maps]. specifying who they are. Some 2 location information is stored even Detecting the current location on a when the application is not running. map

Using Google Map On the map screen, tap . 1 ･ The blinking blue arrow shows the The Google Maps application lets you view current location. your current location, find other locations and calculate routes. When you start the Google Using Street View Maps application, your approximate location ･ Street View does not cover some areas. is shown using information from nearby Touch and hold a spot on the map mobile towers. Your location is updated with a 1 more precise position when the GPS receiver that you are going to look at in finds your location. Street View. Tap the displayed balloon. ❖Information 2 ･ Make sure you enable the current location Tap (Street View). information setting before trying to get your 3 ･ When Street View is operating, press position. t and tap [Compass mode], and ･ If the screen orientation does not change then the compass in Street View automatically when you turn the terminal sideways, from the Home screen, press t and tap shows the same direction as the [Settings] X [Display], then mark [Auto-rotate terminal's geomagnetic compass. screen] checkbox. ･ Uncovered area for Street View ･ To use Google Map, enable data connection (3G/ appears in gray. GPRS) or connect to Wi-Fi. ･ Google Map does not cover the whole world.

Applications 176 Searching for a location you want ❖Information to look at ･ You can use (Show on map), (Get directions), (Call XXXXXXXX), (More On the map screen, press t options), etc. on the detailed information screen. 1 and tap [Search]. The options you can use vary depending on the location. Fill out the search box. ･ With (Places) on the map, select a category 2 ･ You can enter addresses, city names, such as "Restaurants", "Cafe", etc. to search and show it on the map. You can add the search business types and institution names categories. (for example, London and art museum). Zooming in or out on a map ･ You can tap the search box to shows a list of all places entered and referred 1 Tap to zoom in or out on a to previously. Tap an address, etc. on map. the list to check the location on the ❖Information map. If you tap an address on the ･ Alternatively, double-tap or pinch on the screen to menu, you can check the location on zoom in/out. the map. Changing the layer Tap [ 実行 (Execute)]/ . 3 ･ Search result appears on the map. You can select information to overlay on the ･ If appears, tap to select the map. place to display. On the map screen, tap . ･ When "Do you mean..." appears at the 1 Tap an item you want to see. top of the map, you can tap "Do you 2 ･ Traffic information and routes are not mean..." to select the place. available in all locations. Tap a destination. Traffic Show traffic condition. 4 ･ A detailed information screen Satellite Display satellite photo. appears. Terrain Display geological formation. Transit Lines Show route information. Latitude Join Latitude.

Applications 177 Continued on next page My Maps View My Maps that you create on a 5 If your search type is Transit, tap a PC. Only viewing: You cannot create route in the list. My Maps on the terminal. ･ A route is displayed if you search in Wikipedia appears. car or walk option. Tap to display a Tap to display a Wikipedia article route on the map. related to the location. ❖Information ･ With "Navigation" application, you can use easy Receiving guides route search with current location as a departure Google Map helps you receive detailed point. guides for your destination. Clearing the Maps On the map screen, press t, Clear deleted layers, route search results and 1 then tap [Directions]. some others. Enter a departure point in the On the map screen, press t, 2 upper text box, and a destination in 1 then tap [Clear Map]. the lower text box. ･ If there is nothing to clear, you cannot ･ Alternatively, tap at the right of the tap [Clear Map]. text box to select a Start point and End point from [My current location]/ [Contacts]/[Point on map]. Select a transportation device from 3 (Driving)/ (Transit)/ (Walking). Tap [Go]. 4 ･ A list of guides for your destination appears.

Applications 178 Opening Latitude Confirming your friend's current location with Google If you join Latitude, you can confirm where a friend is, and check update with opening the Latitude screen. Google Latitude enables you to check where When a map is displayed, press a friend is on the map, and to share status 1 t, and tap [Latitude]. messages. Latitude also enables you to send messages (SMS) and emails, to make phone ❖Information calls, and to find the route to where a friend ･ For details of Latitude, press t on the map is. screen, then tap [More] X [Help] X [Latitude] to view the mobile help. Location information cannot be automatically shared. You need to join Latitude and invite a friend who gives his or her location Calendar information, or to receive an invitation from him or her. The terminal has a built-in calendar for the schedule. If you have a Google account, you Joining Latitude can synchronize the terminal's calendar and While a map is displayed, press web calendar. See "Accounts & sync" (P.114). 1 t, and tap [Join Latitude]. ･ You need to create a Google account ･ For the first time to join Latitude, a (P.114) before activating the calendar. message confirming whether to allow After Google account registration, tap the friends and Google to share location Google account displayed in "Accounts & information may appear. sync" and a sync item "Sync Calendar". You ･ Once you join Latitude, your menu can create schedule etc. item changes into [Latitude].

❖Information ･ To set Latitude or log out, press t on the map screen, then tap [Latitude], press t and tap [Settings] to display the screen to operate.

Applications 179 Enter a place and some others of Setting the calendar view 7 schedule. From the Home screen, tap , Tap [Save]. 1 then tap [Calendar]. 8 Press t, tap [Day]/[Week] to ❖Information 2 select. ･ Tap [More] and scroll the screen to set "Time zone", "Guests (Email addresses)", "Show me as", ･ In "Day" view, [Week] and [Month] can "Privacy". be selected, and in "Week" view, [Day] and [Month] can be selected. Displaying a calendar schedule

From the Home screen, tap , Creating a calendar schedule 1 then tap [Calendar]. To create a schedule in Calendar, register Tap a schedule you want to Google account and synchronize Google. 2 display. From the Home screen, tap , ･ Flick from side to side to display the 1 then tap [Calendar]. next or previous month/day/week according to the view mode. Tap [New event]. 2 ･ In Day view or Week view, press t ❖Information and tap [New event]. ･ If you login to Facebook, events in Facebook appear on the calendar. 3 Enter a schedule name and date. 4 If you have two or more calendar Releasing the reminder of a accounts, select one. schedule or setting the snooze If necessary, select the repetition If a reminder icon ( ) appears in 5 intervals of the calendar. 1 the status bar, drag the bar 6 Select the notification intervals of downward. the schedule. ･ The notification panel opens. ･ Tap to add a new notification into ･ The reminder icon appears at set the schedule. notification time.

Applications 180 Continued on next page 2 Tap a schedule. 1 From the Home screen, tap . Tap [Snooze all]/[Dismiss all]. Tap [Clock]. 3 ･ If you have any schedules on hold, 2 The Clock screen appears.

they appear on the same screen. a ･ If you tap [Snooze all], all the b calendars can be put on snooze 5 minutes later. (Snooze is a function c that sounds the alarm some time later even though you stop it.)

d Changing the calendar settings Set Calendar view, reminder notifications, ringtone, vibration, reminder time. e f g h a Alarm display From the Home screen, tap , 1 ･ Appear when there is a set alarm. then tap [Calendar]. b : Turn off the backlight. Tap the screen to light up. Press t, tap [More] X ･ 2 c Clock display [Settings]. ･ When 5 minutes are passed without touching Select an item to change. the display, the day and time view appears. 3 d News & Weather ･ Tap to activate "News & Weather". * To view the weather of current location, set to position the current location (P.175). Clock/Alarm e : Set alarm. f : Set to slideshow display. With "Clock" application, you can set an g : Display the Music player screen. alarm; additionally, you can set to show the h : Go to the Home screen. clock or photo slideshow on the display or to play with the Music player.

Applications 181 Turning the alarm ON/OFF Setting the alarm On the alarms list screen, tap . From the Home screen, tap , 1 If you set the alarm on, green line 1 then tap [Alarms]. ･ under lights on and appears in ･ The alarm list screen appears. the status bar. ･ Alternatively, tap on the clock When you set the alarm off, the line screen to display the alarm clock list. ･ under turns off. Tap [Add alarm]. 2 ･ A new alarm time setting screen Setting the alarm settings appears. Make common settings such as alarm 3 Tap numbers to adjust the time and volume etc. then tap [Set]. From the alarms list screen, press ･ An edit new alarm screen appears 1 t. and you can set the following items. Tap [Settings]. Turn alarm Mark to set the alarm on. 2 ･ The alarm common settings screen on appears and you can set the following Time When changing the time, tap to items. return to Step 3. Repeat Set a day of the week for the alarm. Alarm in silent Set not to sound the ringtone in ･ No repetition without setting mode silent mode. Ringtone Select ringtone. Alarm volume Set alarm volume. Vibrate Mark to vibrate at the alarm time. Snooze duration Set time interval to sound the Label Name the alarm. ringtone again after stopping the ringtone. Tap [Done]. Side key behavior Set operation when side key (m) is pressed while 4 ･ Return to the alarms list screen. alarm is sounding.

Applications 182 Deleting the alarm Other applications On the alarms list screen, tap an 1 alarm to delete. The following applications are preinstalled in the terminal to use the various services on the Tap [Delete]. 2 Web. 3 Tap [OK]. Friends' music & videos Stopping an alarm while the alarm is sounding Friends' music & videos is an application for viewing the list of music and videos that are On the dialog box for the alarm shared on Facebook. You can also view a list 1 sounding, tap [Dismiss] or of videos and tracks shared by Friends on [Snooze]. Facebook. In addition, you can select a video ･ [Dismiss] stops the alarm. [Snooze] or track to post or to view comments and "い stops the alarm in a given time and いね！ (Like)". sounds again. To use the application, login to Facebook, then from the Home screen, tap and tap [Music & videos]. OfficeSuite

With OfficeSuite, you can view files of Word, Friends' games & applications Excel, etc. from the terminal or the microSD Friends' games & applications is an card. application for viewing the list of games or applications that are shared on Facebook. Activating OfficeSuite You can download games and applications that are not installed on the terminal from 1 From the Home screen, tap . here. Tap [OfficeSuite]. To use the application, login to Facebook, 2 OfficeSuite is activated. then from the Home screen, tap and tap [Games & apps].

Applications 183 SE Store life.episode SE Store displays Sony Ericsson Store. life.episode application is a new You can view information on accessories entertainment which allows you to discover compatible the terminal and purchase them. the latest information for wide ranged To use SE Store, from the Home screen, tap categories such as news, music, animation, and then tap [SE Store]. photos, gourmet, shopping, etc. corresponding specified age and gender. PlayNow Use "Pocket" function, you can clip favorite information easily and take it out any time. PlayNow is a web application which allows To use life.episode, from the Home screen, you to use news flash, dictionary service, etc. tap and then tap [life.episode] to To use the application, from the Home download the application. Set age and screen, tap and then tap [PlayNow] to gender to complete installation. connect the dedicated site. For membership registration etc., operate following the ToruCa onscreen instructions. ToruCa is an electronic card that can be mora touch obtained to mobile terminals. It can be obtained from the site as store information, mora touch is an application which allows coupon ticket, etc. Obtained ToruCa is saved you to access music downloading service for to the "ToruCa" application. Use the "ToruCa" Android terminal. application to display, search or update. To use the application, from the Home For details on ToruCa, refer to "ご利用ガイド screen, tap and then tap [mora touch] to ブック (sp モード編) (Mobile Phone User's connect the dedicated site. You can operate Guide [sp-mode]) (in Japanese only)" or after creating a new account or using your DOCOMO Market. existing account.

Applications 184 Continued on next page ❖Information ･ For obtaining, displaying or updating ToruCa, a Video Unlimited packet communication charge may be applied. This application allows you to use the online ･ Some ToruCa provided to i-mode terminal may not service "Video Unlimited" providing new be obtained/displayed/updated. ･ Depending on the settings of IP (Information entertainment world via Sony's internet Provider), the following functions may not be compatible devices. You can download your available. favorite videos to the terminal to enjoy - Updating, sending attaching email, moving to watching everywhere. microSD card, copying/displaying map To use the application, tap from the Home ･ Some ToruCa which can be displayed in a map from ToruCa (details) may not be displayed in a screen, tap [Video Unlimited] to install the map from the ToruCa list depending on the IP application, and then back to the Home settings. screen, X Tap [Video] to connect to the ･ If you set 重複チェック (Duplication check) to dedicated website. "ON", obtaining the same ToruCa redundantly is not available. To obtain the same ToruCa redundantly, set it to "OFF". ･ When you send ToruCa attaching to email, it is sent in the condition before obtaining ToruCa (details). ･ Depending on email application, ToruCa received via the emails may not be saved. ･ Depending on browser, ToruCa cannot be obtained. ･ When ToruCa is moved/copied to the microSD card, it is moved/copied in the condition before obtaining ToruCa (details).

Applications 185 ng i ❖Information onal roam i Overview of International ･ For Country code, International call access code, Internat roaming (WORLD WING) Universal number international prefix, supported countries/area and network operator, refer to "Mobile Phone User's Guide [International With the international roaming (WORLD Services]" or DOCOMO International Services WING), you can use without changing phone Website. number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the Available Services settings of call and SMS. Main communication GSM/ 3G GSM ■ Service area service GPRS The terminal works in a 3G roaming area Call ○○○ and GSM/GPRS service area. Services Message (SMS) ○○○ are also available in countries and areas Email*1 supporting 3G850MHz/GSM850MHz. ○○× Browser*1 Check available area. ○○× Position location of ○○× ■ Before using the terminal overseas, GPS*2 refer to the followings. *1 To use data communication during roaming, mark "Mobile Phone User's Guide [Data roaming] checkbox in Mobile network settings. ･ (P.190) [International Services]" *2 For GPS positioning (Positioning location), a packet ･ DOCOMO International Services communication charge is applied. website ･ Some services are not available depending ･ "ドコモ海外利用 (International on the overseas network operator or roaming)" application help network.

International roaming 186 Before using Advance preparation Network service settings Before leaving Japan If you subscribe to network services, you can To use the terminal overseas, check the use network services such as Voice Mail following in Japan. Service, Call Forwarding Service, Caller ID Notification Service, etc., even overseas. ■ Subscription However, some network services cannot be ･ Check the subscription of WORLD used. WING. For details, contact "General ･ To use network services overseas, you need Inquiries" on the last page of this to set "Remote access" to activate. You can manual. set "Remote access" in the country you stay. ･ Even if the setting/canceling operation is ■ Usage charge available, some network services cannot be ･ Overseas usage charges (call and used depending on overseas network packet communication) differ from those operators. in Japan. ･ Some applications automatically perform communications. Your packet After arriving overseas communication charges may be higher When you arrive overseas and turn on the even in Japan. For operation status of terminal, an available network is each application, please check it to the automatically set. application provider.

International roaming 187 Connectivity Date & time settings When you have set search mode of "Available When "Date & time" is set to "Automatic", the networks" to "Select automatically" in date, time and time differences of the "Network operators" settings, optimized terminal clock are corrected by receiving the network is automatically selected. information related to time and time When you connect to the network operator differences from the network of overseas conducted in flat-rate service manually, you network operator you connect to. can use the service with flat-rate packet ･ Correction of the time/time differences may communication charges overseas up to the not be performed correctly depending on specified upper limit per day. To use this the network of overseas network operator. In service, subscription of packet flat-rate that case, set time zone manually. service is required. For details, refer to ･ Timing of correction varies by the overseas "Mobile Phone User's Guide [International network operator. Services]" or DOCOMO International ･ Date & time (P.120) Services Website. About inquiries Display ･ For loss or theft of the terminal or UIM, In the status bar, the type of your operator's immediately contact DOCOMO from the network are displayed. spot to take the necessary steps for : During International roaming suspending the use. For inquiries, see the / : Connecting/Using GPRS last page of this manual. Note that you are / : Connecting/Using 3G (packet) still liable for the call and communication / : Connecting/Using HSDPA charge incurred after the loss or theft ･ You can confirm the name of the connected occurred. network operator on the Notification panel. ･ For using from land-line phone, entering "International call access code" or "Universal number international prefix" for the country is needed.

International roaming 188 After returning to Japan Confirming and switching the When you return to Japan, the terminal is network search mode connected to DOCOMO's network By default, network search mode is set to automatically. If connection is failed, perform "Select automatically". When you connect the following operations. manually to an overseas network operator ･ Set "Preferred network mode" of "Network conducted in flat-rate service, confirm the Mode" to "GSM/WCDMA preferred". (P.190) search mode with the following operations ･ Set "Search mode" to "Select automatically" and switch to "Select manually". in "Network operators" settings. (P.189) From the Home screen, press t 1 and tap [Settings]. Making a call to outside country Tap [Call settings] X [Service you stay (including Japan) 2 providers]. When you start the international roaming or Tap [Search mode] X [Select move out of your operator's network, you 3 manually]. need to reconnect the terminal to another available network. From "Available networks", tap to 4 unmark a network to use. ❖ Information ･ To display available networks, tap ･ Some applications automatically perform packet [Search networks]. communications. To disconnect packet communication manually, from the Home screen, ❖Information t press and tap [Settings] X [Wireless & ･ If you set a network manually, the terminal is not networks] X [Mobile networks] X [Data enabled] reconnected to another network automatically even to unmark. if you move out of the network area. ･ To return to "Select automatically", tap [Select automatically] in Step 3.

International roaming 189 Changing network mode Making/Receiving calls in You can change network mode settings according to the network mode the country you stay (communication method) adopted by the When you arrive overseas and turn on the overseas network operator. terminal, an available network is 1 From the Home screen, press t automatically set. and tap [Settings]. ･ Check that the battery and signal levels are high enough. Tap [Wireless & networks] X Depending on the network operator, even if 2 [Mobile networks] X [Network ･ Mode]. the Caller ID notification is active, the caller ID may not be notified or appear properly. 3 Select your preferred network In this case, calls cannot be made from the mode. call log screen. ･ You can select from [WCDMA only], [GSM only] or [WCDMA preferred/ GSM]. If you select [WCDMA Making a call to outside country preferred/GSM], you can use both you stay (including Japan) GSM and WCDMA. You can make a call from overseas using the international roaming service. Activating data roaming ･ You can easily make international calls from From the Home screen, press t the country you stay to Japan or to other 1 and tap [Settings]. countries by entering prefix "+" and then the country code and phone number. Tap [Wireless & networks] X 2 [Mobile networks]. From the Home screen, tap 1 [Phone]. 3 Tap [Data roaming]. Read the cautions displayed, tap 4 [Yes]. ･ [Data roaming] checkbox is marked.

International roaming 190 Continued on next page Dial + (press and hold [0]) X 2 Country code X Area code (City Making a call to WORLD WING code) X Enter a phone number. user overseas ･ If the area code begins with "0", omit When the other party uses international "0". However, "0" may be required to roaming service, make a call as an dial to some country or area such as international call to Japan even when you Italy. stay in the same country as the other party. ･ To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code. Receiving a call in the country you stay Tap [Call]. 3 You can receive a call using the international roaming service. Making a call within the country While receiving a call, touch you stay 1 (left) and drag it to (right). You can make a call by entering the phone When the conversation is finished, number of the other party's land-line phone or 2 tap [End call]. mobile phone in the same way you do in Japan. ❖Information ･ When you received a call during the international From the Home screen, tap roaming, regardless of which country the call is 1 [Phone]. from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the Enter the other party's phone receiver is charged for a reception fee. 2 number. ･ To make a call to land-line phone, enter the area code (city code) + other party's phone number. 3 Tap [Call].

International roaming 191 ■ Having the other party call you ･ To have the other party in Japan call you overseas To have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan. ･ To have the other party make a call from the outside Japan to the terminal in the country you stay You have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access code and "81" (Country code of Japan). International access code - 81 - 90 (or 80) - XXXX - XXXX

International roaming 192 x/Index i

Append Optional and related Troubleshooting devices Troubleshooting A variety of commercially available optional devices allows you to expand the terminal's ･ First, check if the software update is capabilities by supporting a wide range of necessary for the terminal. If necessary, purpose, including personal and business perform the software update (P.201). uses. ･ When checking the following items not to Some accessories are only available in some improve the state, contact the phone areas. number given in "Repairs" the last page of For details, please contact a sales outlet such this manual (in Japanese only) or as docomo Shop. DOCOMO-specified repair office. For details on optional devices, see the user's Power supply manual of each device. ■ ･ Back Cover SO17 Cannot power on the terminal. ･ Battery Pack SO04 ･ Check if the battery pack is attached P. 3 1 ･ AC Adapter cable SO03 properly. ･ FOMA Portable Charging Adapter 02* ･ Check if the battery pack is not run out. P.29 ･ Carry Case 02 ･ Pocket charger 01 ■ Charging * To charge the terminal, use the supplied Cannot charge the terminal. microUSB cable. (The notification LED does not turn on, or the icon that means charging does not appear.) ･ Check if the battery pack is attached P. 3 1 properly. ･ Check if the AC adapter cable's power P. 3 2 plug is correctly inserted to an outlet. ･ Check if the AC adapter cable and the P. 3 2 terminal are set correctly.

Appendix/Index 193 Continued on next page ･ If you execute calls, communications - ･ The operating time of the battery pack P. 3 0 or other function operations while varies depending on the operating charging, the terminal may become hot environment and the secular and the battery status icon may not degradation of the battery pack. indicate charging. In this case, wait ･ The battery pack is a consumable - until the temperature of the terminal accessory. The usage duration of the drops and charge again. battery per one charge decreases The notification LED blinks in red and cannot gradually each time the battery is operate the terminal. recharged. ･ When the battery level is low, charge P. 2 9 Even the full charge state, when the the battery pack. operation time is too short, purchase a new battery pack of the specified type. ■ Terminal operation Turning the power off or restarting automatically happens. Become hot while operating/charging. ･ If the jack of battery pack is dirty, the - ･ While calling, depending on the radio - contact may become poor and the wave condition or call duration time, power may shut OFF. When it is dirty, the terminal may become hot. This clean the battery pack with a dry condition is not abnormal. cotton swab etc. ･ While operating or charging, or if you - No operations are performed even by pressing record video, etc. for a long time while the keys on the terminal. charging the battery, the terminal, ･ Check if you activate the screen lock. P.109 battery pack and adapter may become hot. There is no problem about safety The screen reacts slowly when a button is and continue to use it. pressed. The operation time provided by the battery pack ･ When large amount of data is saved in - is short. the terminal or transferring large-size data between the terminal and ･ Is your terminal left for a long time - microSD card, the reactions on the under the state of out of service area? screen may be delayed. Out of service area, many powers are consumed to search available radio The UIM is not recognized. waves. ･ Check if the UIM installed in the right P. 2 7 direction.

Appendix/Index 194 Continued on next page The clock is not on time. ･ Due to the crossing of radio waves, at - ･ The clock time may become wrong P. 1 20 the crowded public places, calls/mails while turning on the power for a long are crossed and the connection status time. Check if "Auto" time adjust (auto may not be good. Move to other place time adjust via network) is set to on and or call again at other time. turn the power off and on in a place with strong radio wave conditions. ■ Display

The display is dim. ■ Phone call ･ Check if the backlight time-out is set. P.106 Cannot make a call even if you press the dial ･ Check if the brightness of screen is P. 1 05 button. changed. ･ Check if you activate the SIM card P. 1 08 ･ Check if you activate eco mode. P.52 lock. ･ Check if you activate Airplane mode. P.95 ■ Sound The ringtone does not sound. During a voice call, the distant party's voice is ･ Is the call alert volume of volume P. 1 04 hard to listen to or too loud. setting set to silent? ･ Check if the listening volume of the P. 7 4 ･ Check if the silent mode is active. P.103 sound volume setting is changed. ･ Is the ring time for Voice Mail service or P. 8 7 Call Forwarding Service "0 Sec."? P. 9 1 ■ Display data Calls are not connected. Images or ringtones set in each feature do not (Even when moving " (out of service area)" 圏外 work and the terminal operates in the default does not disappear, or although radio waves are data. enough, making/receiving calls is unavailable). ･ Is the UIM currently inserted is the - Turn the power off and on, or remove P. 2 7 ･ same one which is set when the and attach battery pack or UIM. P. 3 1 images or ringtones are obtained? P. 3 4 ･ Due to the nature of radio waves, - ■ Camera making/receiving calls may be unavailable even when "not out of Photos and video taken with the camera are service area" or " appears on the blurred. display for the radio wave condition". ･ When shooting an object nearby, P. 1 53 Move to the other place and call again. switch to macro shooting.

Appendix/Index 195 Continued on next page ･ Check if clouds or dirt attach to the - Cannot use the terminal suddenly while using lens of camera. overseas. ･ Check if usage amount exceeds the - ■ International roaming limit of maximum charges for use. For use of "International roaming Cannot use the terminal overseas. (WORLD WING)", the limit of maximum ■ When antenna mark is displayed - charges for use is set in advance. If ･ Do you subscribe WIRLD WING? exceeding the limit of maximum Check if you subscribe WORLD WING. charges for use, pay the charges. ■ Out of service area indicator P. 1 87 Cannot receive calls overseas. appears P. 1 90 ･ Is "Incoming Call" se to "active"? - ･ Check if you are out of the international P. 3 4 roaming service area or in an area with No caller ID is notified/A notified caller ID is poor signal strength. different from that of the caller/Functions for Check if the service area and network using contents saved in phonebook or those operator are available, referring to using Caller ID notification do not operate. "Mobile Phone User's Guide ･ Even when a caller notifies its caller ID, - [International Services]" or DOCOMO it is not displayed on the terminal International Services website. unless notified from the network or ･ Try to change the network settings or network operator used. And, a notified overseas network operator settings. caller ID is different from that of the Set "Search mode" of "Network caller by some networks or networks operators" to "Select automatically". operators you use. Set "Network Mode" to "GSM/WCDMA preferred". ■ Data management ･ Turning off the terminal and then turning on again may work for the Data transfer is not performed. restoration. ･ Check if USB hub is used. If you use - Cannot perform data communication overseas. USB hub, operations may not be performed correctly. Mark the data roaming checkbox. P.190 Data saved in microSD card is not displayed. ･ Remove the microSD card and insert it P. 2 8 again.

Appendix/Index 196 Continued on next page When trying to display an image, "×" appears instead of it. Error messages Or "×" appears for the demo play or the preview function. No service ･ "×" may appear instead of destroyed - ･ The terminal is out of service area, or the image data. received signal is too weak. Move to a location where radio signal can be reached. ■ Bluetooth function ･ The UIM is not working properly. The terminal cannot be connected to a Bluetooth Insert the UIM in another terminal. If this communication device/A Bluetooth works, it is probably the terminal that is communication device cannot be found from the causing the problem. In this case, contact terminal. "Repairs" on the last page of this manual (in ･ Make Bluetooth communication device P. 1 44 Japanese only). (commercial item) registering stand-by Removing and inserting UIM may improve state and then register the device on the terminal. If you delete already the problem. registered device and register the device again as a new device, delete SIM card is locked the registrations on both Bluetooth Enter your PIN code (P.108) correctly. communication device (commercial item) and the terminal and then perform registration of the devices. SIM card is PUK-locked Calls cannot be made from the terminal Enter your PUK (Personal Unblocking Key) connecting to external device such as car (P.108) correctly. navigation or handsfree devices. ･ If calls are made several times when - The phone storage is full the other party does not answer or is There is no memory space. Delete out of service, the call to this number may be disabled. In this case, turn unnecessary applications (P.113) to obtain terminal off and on. memory space.

Appendix/Index 197 Warranty and After Sales After Sales Services Services If you have problems with the terminal Warranty Before asking repair, see "Troubleshooting" ･ Make sure that the warranty is received with (P.193) in this manual to check the problem. If the terminal upon purchase. Check to be the problem still persists, contact "Repairs" on sure that "販売店名・お買い上げ日 (the the last page of this manual (in Japanese name of the retailer, date of purchase)", and only). other items have been filled out on the If repair is required resultingly warranty before storing it in a safe place. If any necessary information is not provided, Bring the terminal to the DOCOMO-specified immediately contact the retailer and request repair office. However, it must be taken to complete the warranty. The terminal during business hours of the repair office. comes with a year's free warranty starting Make sure to bring a warranty card with the from the date of purchase. product when you visit the shop. Note that ･ Specifications of this product and its repair may take some days depending on the accessories are subject to change for problem. improvement without prior notice. ･ Data saved in the Contacts etc. may be changed/lost due to the trouble/repairs or handling of the terminal. Note down the data such as the contacts on a separate memo and keep it safely to prevent such problems. * You can save contents data in a microSD card inserted to the terminal.

Appendix/Index 198 ■ Within the warranty period ■ Note that repair may be refused in ･ We repair the terminal free of charge the following cases: based on the terms documented in the ･ When some water problem is warranty. acknowledged by the repair office (e.g. ･ When requesting a repair, make sure to water leak seal is reacted). bring the warranty card with the ･ When the terminal has corrosion due to terminal. Repair requests that are not wet by liquid, condensation, accompanied by the warranty or that perspiration, etc. or the internal circuit involve malfunction and damage due to board is damaged or deformed (we may incorrect handling by the owner not be able to repair when the microUSB (damage of liquid crystal, connector, connector, headset connection jack, etc) will only be repaired at the owner's liquid crystal, etc. is damaged or the expense, even if the warranty period is frame itself is cracked) based on the still effective. result of our examination. ･ Malfunction due to use of devices and - Even if repair is possible, it will be consumable parts other than those done at the owner's expense, as this specified by DOCOMO will only be type of corrosion or damage is not repaired at the owner's expense, even if covered by the warranty. the warranty period is still effective. ■ If the warranty period expires We will repair the terminal at the owner's expense.

Appendix/Index 199 ■ Parts stock period - Change the parts such as exterior to The functional parts necessary to repair other than DOCOMO standard parts. the terminal will be basically available for ･ Malfunction and damage due to a minimum of six years after the modifications will be repaired at the manufacture is discontinued. owner's expense, even if the warranty However, depending on the defective period is still effective. portion, repair may not be possible ● The model plate must not be removed because of a shortage of repair parts. from the terminal. Note that repair may still be possible The model plate certifies that the terminal depending on the defective portion even satisfies technical standards. It should be if the stock period has expired. Contact noted that if the plate is removed or is "Repairs" on on the last page of this replaced with a different plate, and the manual (in Japanese only). original model plate cannot be verified, it may disqualify the unit from repairs due to Precautions not being able to determine the technical ● Never modify the terminal or standards of that particular phone. accessories. ● Note that the settings and other ･ Doing so may result in fire, injuries or information may be reset (cleared) as a malfunctions. result of malfunction, repair or other ･ The modified terminal may be repaired handling. In this case, make the settings only if the owner agrees on that all the again. modified parts are restored to the original ● After the repair, Wi-Fi MAC address or conditions. Bluetooth address may be changed However, repairs may be refused regardless of the repaired parts. depending on the modifications. The following cases may be considered as modifications. - Put a seal etc. on the liquid crystal or keypad. - Glued decorations on the terminal using adhesion bond, etc.

Appendix/Index 200 Continued on next page ● A material that generates a magnetic field is used in the following parts of the Updating software terminal. You can update the terminal to the most Do not hold an object that is easily recent software for optimal performance and affected by magnetism, such as a cash to get the latest enhancements. card, close to the terminal. You may not be able to use the card any more. ❖Note Where it is used: Speaker, earpiece ･ When the terminal is connected to the Internet ● If the terminal has gotten wet or moist, using the mobile network connection, data immediately power off the terminal and communication fee is applied. ･ Make sure you back up and save all data remove the battery pack from it, and contained in the terminal before you start updating then bring it to the DOCOMO-specified the terminal. repair office as soon as possible. ･ For the first time activating the terminal after However, note that we may not repair the software update, the operation may be slower from terminal depending on the extent of the several minutes to several ten minutes due to data update. The required time varies by the data in the damage. terminal. Do not turn the power off until usual operation speed comebacks. Precautions on memory dial (Contacts function) and ❖Information downloaded data ･ For details, refer to http://www.sonyericsson.co.jp/ support/. Note that data you created or data you retrieved or downloaded from sources other Downloading software updates than your terminal may be changed or lost when you change the model or have repairs wirelessly done to the terminal. DOCOMO shall have no Downloading software to update liability for any change or loss of any kind. Latest software can be downloaded Under some circumstances, DOCOMO may wirelessly directly from your terminal via the replace your terminal with its equivalent Internet by using mobile network connection instead of repairing it. or by using a Wi-Fi network connection.

Appendix/Index 201 Continued on next page From the Home screen, tap , Press t, then tap [Settings]. 1 then tap [Update center]. 2 Tap [Automatic update] X [Via Wi- Press t, then tap [Refresh]. 3 Fi only]/[Via 3G/Wi-Fi] X [OK]. 2 ･ The terminal searches for software ❖Note updates.Note ･ Note that packet communication fee may apply for ❖Note searching automatically. ･ To download software updates by using Wi-Fi only, from the Home screen, tap , tap [Update Connecting to a PC and center] X t, then tap [Settings] X [Automatic update] X [Via Wi-Fi only]. Note that if you select updating [Via 3G/Wi-Fi], a Wi-Fi connection automatically You can update software by using PC switches to 3G connection when the Wi-Fi connection is unstable and packet communication Companion that can be installed into a PC fee may apply. from the terminal. ･ For software update via mobile network, a high ❖ packet communication charge will be applied Information because of a large amount data communication. ･ To install PC Companion on a PC, an Internet For this reason, subscription of packet flat-rate connection is required. service is highly recommended. ･ While you are using roaming service overseas, you When PC Companion is not cannot search for or download update software installed on your PC through the mobile network. Use the supplied microUSB cable Updating software with the latest 1 to connect the terminal to a PC. information automatically On the terminal, tap [Install]. You can update the software with the latest 2 ･ Installer of PC Companion starts on information automatically on regular basis. If the PC. software update is searched, appears on the status bar. From the Home screen, tap , 1 then tap [Update center].

Appendix/Index 202 Continued on next page Follow the onscreen instructions 3 on the PC to install. Main specifications ･ After installation, PC Companion starts on the PC. If further software ■ The terminal update is searched, it is automatically Product name SO-03D notified. Follow the onscreen Size Approx. 120 mm (H)× instructions on the PC. approx. 62 mm (W)× approx. 16.4 mm (T) When PC Companion is installed Weight Approx. 175 g (with on your PC battery pack attached) Storage ROM 1,024MB Check if PC Companion is (Flash memory) RAM 512MB (SRAM) 1 activated on the PC. If not, activate PC Companion from the Start External memory microSD card: Up to 2GB menu. microSDHC: Up to 32GB (as of October, 2011) Connect the terminal to a PC using 2 a microUSB cable. Continuous FOMA/3G Approx. 480 hours stand-by (Stationary) Follow the onscreen instructions time GSM Approx. 300 hours 3 on the PC. (stationary) ･ If software update is searched, it is Continuous FOMA/3G Approx. 340 min. automatically notified. call time GSM Approx. 450 min. Charging time with AC Approx. 200 min. adapter cable Display Type TFT16,777,217 colors Size Approx. 4.0 inches Number of 480 dots×854 dots dots (Full wide VGA)

Appendix/Index 203 Continued on next page Image Type Camera: CMOS sensor Bluetooth Supported Compliant with Bluetooth pickup In-camera: CMOS Bluetooth standard Ver. 2.1 + device sensor version EDR*1 Size Camera: 1/4 inches Radio Bluetooth standard In-camera: 1/13 inch power Power Class 1 Camera pixels Camera: Effective Available Within Approx. 10 m pixels: Approx. 5.1 mill. communic pixels ation (Recorded pixels: distance*2 Approx 5.1 mill. pixels) In-camera: Effective Supported A 2 DP, AV RCP, H FP, H SP, pixels: Approx. 300,000 Bluetooth OPP, PBAP, SPP pixels (Recorded pixels: profile*3 Approx 300,000 pixels) *1 It is confirmed that the terminal and all Bluetooth Still image capture size Camera: devices are compliant with Bluetooth standards 2592×1944 (5MP) designated by Bluetooth SIG, and they are 2048×1536 (3MP) authenticated. However, procedures may differ or data 1600×1200 (2MP) transfer may not be possible depending on the device's characteristics or specifications. 1024×768 (1MP) *2 May vary by the signal status and/or whether there is 640×480 (VGA) an interference between communications devices. In-camera: 640×480 *3 Bluetooth standards for Bluetooth device connection (VGA) procedure according to the product's applications. Video recording size Camera: Continuous call time is an estimate of the 1280×720 (HD 720p) ･ In-camera: 640×480 operation time for calling when radio signal (VGA) reception is normal. Frame rate Max.: 30 fps ･ Continuous stand-by time is an estimate of Music MP3 file Continuous playback the stand-by time when radio signal playback time reception is normal. Approx. 1900 min. In certain circumstances, the stand-by time (Background playback may drop to as low as half the time shown supported) due to the battery charge, function settings, Wireless LAN (WLAN) Compliant with temperature, or radio signal reception in the IEEE802.11b/g/n area (no reception or weak). (Corresponding frequency band to IEEE802.11n: 2.4 GHz) Appendix/Index 204 Continued on next page ･ A use of the Internet reduces the actual call File format (communication)/stand-by time. The terminal supports the display or Composing messages or activating the playback of the following file format: camera or applications also reduces call (communication)/stand-by time even if you Type File format do not call or use the Internet. Sound MP3, 3GPP, MP4, AMR, AMRWB, ･ Stationary continuous stand-by time is the SMF, XMF, WAV, iMelody, RTTTL/RTX, estimated average operation time when OTA, Ogg vorbis radio signal reception is normal. Still image JPEG, GIF, PNG, BMP ･ Moving continuous stand-by time is the Video 3GPP, MP4 estimated average operation time when the terminal remains in the combined conditions Still images are saved in the following file of "stationary" or "moving" in a service area format: when radio signal reception is normal and Type File format the condition of "out of area". Still image JPEG ･ Charging time is an estimate of the time required to charge a completely empty battery pack. ■ Numbers of still images (Estimation)

Savable number of shot images to ■ Battery pack Resolution microSD card (2GB) Product name Battery Pack SO04 640×480 Approx. 20,000 Battery type Lithium Ion Battery (VGA) Voltage DC 3.6V Current 1500mAh ■ Time length of shooting video (Estimation)

Recordable time of videos to Resolution microSD card (2GB) 640×480 Per video: Up to approx. 30 min. (VGA) Total: Up to approx. 134 min.

Appendix/Index 205 the Specific Absorption Rate, or SAR, which Specific Absorption Rate is the value of absorbed energy in any 10 of Mobile Phone, etc. grams of tissue over a 6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The Mobile Phone GSM/GPRS/EDGE 850/900/ highest SAR value for this mobile phone 1800/1900 & UMTS/HSPA Bands 1/5/6/9/19 when tested for use at the ear is 1.17 W/kg. There may be slight differences between the Specific Absorption Rate (SAR) SAR levels for each product, but they all of Mobile Phones satisfy the limit. The actual SAR of this mobile phone while This model SO-03D mobile phone complies operating can be well below that indicated with Japanese technical regulations and above. This is due to automatic changes to international guidelines regarding exposure the power level of the device to ensure it only to radio waves. uses the minimum required to reach the network. Therefore in general, the closer you This mobile phone was designed in are to a base station, the lower the power observance of Japanese technical output of the device. regulations regarding exposure to radio waves *1 and limits to exposure to radio This mobile phone can be used in positions waves recommended by a set of equivalent other than against your ear. This mobile international guidelines. This set of phone satisfies the international guidelines international guidelines was set out by the when used with a carrying case or a International Commission on Non-Ionizing wearable accessory approved by NTT Radiation Protection (ICNIRP), which is in DOCOMO or the manufacturer *2. In case you collaboration with the World Health are not using the approved accessory, Organization (WHO), and the permissible please use a product that does not contain limits include a substantial safety margin any metals, and one that positions the mobile designed to assure the safety of all persons, phone at least 1.5 cm away from your body. regardless of age and health condition. The technical regulations and international guidelines set out limits for radio waves as

Appendix/Index 206 Continued on next page The World Health Organization has stated *1 Technical regulations are defined by the that "a large number of studies have been Ministerial Ordinance Related to Radio performed over the last two decades to Law (Article 14-2 of Radio Equipment assess whether mobile phones pose a Regulations). potential health risk. To date, no adverse *2 Regarding the method of measuring SAR health effects have been established as when using mobile phones in positions being caused by mobile phone use." other than against the ear, international Please refer to the WHO website if you would standards (IEC62209-2) were set in March like more detailed information. 2010. On the other hand, technical http://www.who.int/docstore/peh-emf/ regulation is currently being deliberated on publications/facts_press/fact_english.htm by national council. (As of October, 2011) Please refer to the websites listed below if you would like more detailed information Radio Wave Exposure and regarding SAR. Specific Absorption Rate (SAR) Ministry of Internal Affairs and Communications Website: Information http://www.tele.soumu.go.jp/e/sys/ele/ United States & Canada index.htm Association of Radio Industries and THIS PHONE MODEL HAS BEEN CERTIFIED Businesses Website: IN COMPLIANCE WITH THE http://www.arib-emf.org/index02.html (in GOVERNMENT'S REQUIREMENTS FOR Japanese only) EXPOSURE TO RADIO WAVES. NTT DOCOMO, INC. Website: The SO-03D mobile phones have been http://www.nttdocomo.co.jp/english/product/ designed to comply with applicable safety sar/ requirements for exposure to radio waves. Sony Ericsson Mobile Communications Your wireless phone is a radio transmitter and Japan, Inc. Website: receiver. It is designed to not exceed the http://www.sonyericsson.co.jp/product/SAR/ limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The

Appendix/Index 207 Continued on next page guidelines are based on standards that were For devices which include "WiFi hotspot" developed by international scientific functionality, body-worn SAR measurements organizations through periodic and thorough for operation of the device operating in WiFi evaluation of scientific studies. The standards hotspot mode were taken using a separation include a safety margin designed to assure distance of 10mm. the safety of all individuals, regardless of age Use of third-party accessories may result in and health. different SAR levels than those reported. The radio wave exposure guidelines employ ** Before a phone model is available for sale a unit of measurement known as the Specific to the public in the US, it must be tested and Absorption Rate (SAR). Tests for SAR are certified by the Federal Communications conducted using standardized methods with Commission (FCC) that it does not exceed the phone transmitting at its highest certified the limit established by the government- power level in all used frequency bands. adopted requirement for safe exposure*. The While there may be differences between the tests are performed in positions and locations SAR levels of various phone models, they are (i.e., by the ear and worn on the body) as all designed to meet the relevant guidelines required by the FCC for each model. The for exposure to radio waves. For more FCC has granted an Equipment Authorization information on SAR, please refer to the safe for this phone model with all reported SAR and efficient use chapter in the User Guide. levels evaluated as in compliance with the The highest SAR value as reported to the FCC RF exposure guidelines. While there authorities for this phone model when tested may be differences between the SAR levels for use by the ear is 1.25 W/kg*, and when of various phones, all mobile phones granted worn on the body is 1.04 W/kg* for speech an FCC equipment authorization meet the and 1.40 W/kg* for data calls. For body-worn government requirement for safe exposure. operation, the phone has been tested when SAR information on this phone model is on file at the FCC and can be found under the positioned a minimum of 15 mm from the Display Grant section of http:// body without any metal parts in the vicinity of transition.fcc.gov/oet/ea/fccid/ after the phone or when properly used with an searching on FCC ID PY7A3880132. appropriate Sony Ericsson accessory and Additional information on SAR can be found worn on the body. on the Cellular Telecommunications &

Appendix/Index 208 Continued on next page Internet Association (CTIA) website at http:// all designed to meet the relevant guidelines www.ctia.org/. for exposure to radio waves. * In the United States and Canada, the SAR limit for mobile phones used by the public For more information on SAR, please refer to is 1.6 watts/kilogram (W/kg) averaged over the safety chapter in the User's Guide. one gram of tissue. The standard SAR data information for residents in incorporates a margin of safety to give countries that have adopted the SAR limit additional protection for the public and to recommended by the International account for any variations in Commission of Non-lonizing Radiation measurements. Protection (ICNIRP), which is 2 W/kg ** This paragraph is only applicable to averaged over ten (10) gram of tissue (for authorities and customers in the United example European Union, Japan, Brazil and States. New Zealand): The highest SAR value for this model phone Europe tested by Sony Ericsson for use at the ear is This mobile phone model SO-03D has been 1.17 W/kg (10g). designed to comply with applicable safety requirements for exposure to radio waves. Radio Frequency (RF) These requirements are based on scientific Exposure and SAR guidelines that include safety margins designed to assure the safety of all persons, Your mobile phone is a low-power radio regardless of age and health. transmitter and receiver. The radio wave exposure guidelines employ When it is turned on, it emits low levels of a unit of measurement known as the Specific radio frequency energy (also known as radio Absorption Rate, or SAR. Tests for SAR are waves or radio frequency fields). conducted using standardized methods with Governments around the world have adopted the phone transmitting at its highest certified comprehensive international safety power level in all used frequency bands. guidelines, developed by scientific While there may be differences between the organizations, e.g. ICNIRP (International SAR levels of various phone models, they are Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of

Appendix/Index 209 Continued on next page Electrical and Electronics Engineers Inc.), requirement for safe exposure. The tests are through periodic and thorough evaluation of performed in positions and locations (that is, scientific studies. These guidelines establish at the ear and worn on the body) as required permitted levels of radio wave exposure for by the FCC for each model. For body worn the general population. The levels include a operation, this phone has been tested and safety margin designed to assure the safety meets FCC RF exposure guidelines when the of all persons, regardless of age and health, handset is positioned a minimum of 15 mm and to account for any variations in from the body without any metal parts in the measurements. vicinity of the phone or when used with the Specific Absorption Rate (SAR) is the unit of original Sony Ericsson body worn accessory measurement for the amount of radio intended for this phone. Use of other frequency energy absorbed by the body accessories may not ensure compliance with when using a mobile phone. The SAR value is FCC RF exposure guidelines. determined at the highest certified power SAR information for this mobile phone model level in laboratory conditions, but the actual is included with the material that comes with SAR level of the mobile phone while this mobile phone. This information can also operating can be well below this value. be found, together with more information on This is because the mobile phone is radio frequency exposure and SAR, on: designed to use the minimum power required http://www.sonyericsson.co.jp/product/SAR/ to reach the network. (Japanese only) Variations in SAR below the radio frequency exposure guidelines do not mean that there Guidelines for Safe and are variations in safety. While there may be Efficient Use differences in SAR levels among mobile phones, all Sony Ericsson mobile phone Please follow these guidelines. Failure models are designed to meet radio frequency to do so might entail a potential health exposure guidelines. risk or product malfunction. If in doubt Before a phone model is available for sale to as to its proper function, have the product the public, it must be tested and certified to checked by a certified service partner before the FCC that it does not exceed the limit charging or using it. established by the government-adopted

Appendix/Index 210 ■ Recommendations for care and safe ･ Discontinue use of electronic devices, or use of our products disable the radio transmitting ･ Handle with care and keep in a clean functionality of the device, where and dust-free place. required or requested to do so. ･ Warning! May explode if disposed of in ･ Do not use where a potentially explosive fire. atmosphere exists. ･ Do not expose to liquid or moisture or ･ Do not place the product, or install excess humidity. wireless equipment, in the area above ･ For optimum performance, the an air bag in a car. product should not be operated ･ Caution: Cracked or broken displays in temperatures below +5°C may create sharp edges or splinters that (+41°F) or above +35°C(+95°F). Do not could be harmful upon contact. expose the battery to temperatures ･ Do not use the Bluetooth Headset in above +60°C(+140°F). positions where it is uncomfortable or ･ Do not expose to flames or lit will be subject to pressure. tobacco products. Children ･ Do not drop, throw or try to bend ■ Keep out of the reach of the product. Warning! children. Do not allow children to ･ Do not paint or attempt to play with mobile phones or accessories. disassemble or modify the They could hurt themselves or others. product. Only Sony Ericsson Products may contain small parts that authorised personnel should perform could become detached and create a service. choking hazard. ･ Consult with authorised medical staff and the instructions of the medical device manufacturer before using the product near pacemakers or other medical devices or equipment.

Appendix/Index 211 ■ Power supply (Charger) ■ Battery Connect the charger to power sources as New or idle batteries can have short-term marked on the product. Do not use reduced capacity. Fully charge the outdoors or in damp areas. Do not alter or battery before initial use. Use for the subject the cord to damage or stress. intended purpose only. Charge the Unplug the unit before cleaning it. Never battery in temperatures between alter the plug. If it does not fit into the +5°C(+41°F) and +35°C(+95°F). Do not outlet, have a proper outlet installed by an put the battery into your mouth. Do not let electrician. When a power supply is the battery contacts touch another metal connected there is a small drain of power. object. Turn off the product before To avoid this small energy waste, removing the battery. Performance disconnect the power supply when the depends on temperatures, signal product is fully charged. Use of charging strength, usage patterns, features devices that are not Sony Ericsson selected and voice or data transmissions. branded may pose increased safety risks. Only Sony Ericsson service partners should remove or replace built-in batteries. Use of batteries that are not Sony Ericsson branded may pose increased safety risks. Replace the battery only with another Sony Ericsson battery that has been qualified with the product per the standard IEEE-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.

Appendix/Index 212 ■ Personal medical devices ■ GPS/Location based functions Mobile phones may affect implanted Some products provide GPS/Location medical equipment. Reduce risk of based functions. Location determining interference by keeping a minimum functionality is provided "As is" and "With distance of 22 cm(8.7 inches) between all faults". Sony Ericsson does not make the phone and the device. Use the phone any representation or warranty as to the at your right ear. Do not carry the phone in accuracy of such location information. your breast pocket. Turn off the phone if Use of location-based information by you suspect interference. For all medical the device may not be uninterrupted or devices, consult a physician and the error free and may additionally be manufacturer. dependent on network service availability. Please note that functionality may be ■ Driving reduced or prevented in certain Some vehicle manufacturers forbid the environments such as building interiors or use of phones in their vehicles unless a areas adjacent to buildings. handsfree kit with an external antenna Caution: Do not use GPS functionality in supports the installation. Check with the a manner which causes distraction from vehicle manufacturer's representative to driving. be sure that the mobile phone or Bluetooth handsfree will not affect the ■ Emergency calls electronic systems in the vehicle. Full Calls cannot be guaranteed under all attention should be given to driving at all conditions. Never rely solely upon mobile times and local laws and regulations phones for essential communication. restricting the use of wireless devices Calls may not be possible in all areas, on while driving must be observed. all networks, or when certain network services and/or phone features are used.

Appendix/Index 213 ■ Antenna be well below this value. There is no proof Use of antenna devices not marketed by of difference in safety based on Sony Ericsson could damage the phone, difference in SAR value. reduce performance, and produce SAR Products with radio transmitters sold in levels above the established limits. Do not the US must be certified by the Federal cover the antenna with your hand as this Communications Commission (FCC). affects call quality, power levels and can When required, tests are performed when shorten talk and standby times. the phone is placed at the ear and when worn on the body. For body-worn ■ Radio Frequency (RF) exposure and operation, the phone has been tested Specific Absorption Rate (SAR) when positioned a minimum of 15 mm When the phone or Bluetooth handsfree is from the body without any metal parts in turned on, it emits low levels of radio the vicinity of the phone or when properly frequency energy. International safety used with an appropriate Sony Ericsson guidelines have been developed through accessory and worn on the body. periodic and thorough evaluation of For more information about SAR and scientific studies. These guidelines radio frequency exposure, go to: http:// establish permitted levels of radio wave www.sonyericsson.co.jp/product/SAR/ exposure. The guidelines include a safety (Japanese only) margin designed to assure the safety of all persons and to account for any ■ Flight mode variations in measurements. Bluetooth and WLAN functionality, if Specific Absorption Rate (SAR) is used available in the device, can be enabled in to measure radio frequency energy Flight mode but may be prohibited absorbed by the body when using a onboard aircraft or in other areas where mobile phone. The SAR value is radio transmissions are prohibited. In determined at the highest certified power such environments, please seek proper level in laboratory conditions, but authorisation before enabling Bluetooth or because the phone is designed to use the WLAN functionality even in Flight mode. minimum power necessary to access the chosen network, the actual SAR level can

Appendix/Index 214 ■ Malware ■ Disposal of old electrical and Malware (short for malicious software) is electronic equipment software that can harm the mobile phone Electronic equipment and or other computers. Malware or harmful batteries should not be included as applications can include viruses, worms, household waste but should be left at an spyware, and other unwanted programs. appropriate collection point for recycling. While the device does employ security This helps prevent potential negative measures to resist such efforts, Sony consequences for the environment and Ericsson does not warrant or represent human health. Check local regulations by that the device will be impervious to the contacting your local city office, your introduction of malware. You can however household waste disposal service, the reduce the risk of malware attacks by shop where you purchased the product or using care when downloading content or calling a Sony Ericsson Contact Center. accepting applications, refraining from Do not attempt to remove internal opening or responding to messages from batteries. Internal batteries shall be unknown sources, using trustworthy removed only by a waste treatment facility services to access the Internet, and only or trained service professional. downloading content to the mobile phone from known, reliable sources. ■ Disposing of the battery Check local regulations or call a ■ Accessories Sony Ericsson Contact Center for Use only Sony Ericsson branded original information. Never use municipal waste. accessories and certified service partners. Sony Ericsson does not test third-party accessories. Accessories may influence RF exposure, radio performance, loudness, electric safety and other areas. Third-party accessories and parts may pose a risk to your health or safety or decrease performance.

Appendix/Index 215 ■ Memory card ･ Do not strike, bend, or drop the memory If the product comes complete with a card. removable memory card, it is generally ･ Do not attempt to disassemble or modify compatible with the handset purchased the memory card. but may not be compatible with other ･ Do not use or store the memory card in devices or the capabilities of their humid or corrosive locations or in memory cards. Check other devices for excessive heat such as a closed car in compatibility before purchase or use. If summer, in direct sunlight or near a the product is equipped with a memory heater, etc. card reader, check memory card ･ Do not press or bend the end of the compatibility before purchase or use. memory card adapter with excessive Memory cards are generally formatted force. prior to shipping. To reformat the memory ･ Do not let dirt, dust, or foreign objects card, use a compatible device. Do not get into the insert port of any memory use the standard operating system format card adapter. when formatting the memory card on a ･ Check you have inserted the memory PC. For details, refer to the operating card correctly. instructions of the device or contact ･ Insert the memory card as far as it will go customer support. into any memory card adapter needed. The memory card may not operate Warning! properly unless fully inserted. If the device requires an adapter for insertion ･ We recommend that you make a backup into the handset or another device, do not copy of important data. We are not insert the card directly without the required responsible for any loss or damage to adapter. content you store on the memory card.

■ Precautions on memory card use ･ Do not expose the memory card to moisture. ･ Do not touch terminal connections with your hand or any metal object.

Appendix/Index 216 Continued on next page ･ Recorded data may be damaged or lost when you remove the memory card or FCC Statement for the USA memory card adapter, turn off the power This device complies with Part 15 while formatting, reading or writing data, of the FCC rules. Operation is or use the memory card in locations subject to the following two subject to static electricity or high conditions: electrical field emissions. (1) This device may not cause harmful interference, and ■ Protection of personal information (2) This device must accept any interference Erase personal data before disposing of received, including interference that may the product. To delete data, perform a cause undesired operation. master reset. Deleting data from the Any change or modification not expressly phone memory does not ensure that it approved by Sony Ericsson may void the cannot be recovered. Sony Ericsson does user's authority to operate the equipment. not warrant against recovery of This equipment has been tested and found to information and does not assume comply with the limits for a Class B digital responsibility for disclosure of any device, pursuant to Part 15 of the FCC Rules. information even after a master reset. These limits are designed to provide Loudness warning! reasonable protection against harmful interference in a residential installation. This Avoid volume levels that may be harmful to equipment generates, uses and can radiate your hearing. radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Appendix/Index 217 Continued on next page If this equipment does cause harmful interference to radio or television reception, Declaration of Conformity for which can be determined by turning the SO-03D equipment off and on, the user is encouraged We, Sony Ericsson Mobile to try to correct the interference by one or Communications AB of Nya Vattentornet more of the following measures: SE-221 88 Lund, Sweden declare under our ･ Reorient or relocate the receiving antenna. sole responsibility that our product ･ Increase the separation between the Sony Ericsson type AAD-3880132-BV equipment and receiver. and in combination with our accessories, to ･ Connect the equipment into an outlet on a which this declaration relates is in conformity circuit different from that to which the with the appropriate standards EN 301 receiver is connected. 511:V9.0.2, EN 301 489-7:V1.3.1, EN 301 ･ Consult the dealer or an experienced radio/ 908-1:V4.2.1, EN 301 908-2:V4.2.1, EN 301 TV technician for help. 489-24:V1.5.1, EN 300 440-2:V1.4.1, EN 301 489-3:V1.4.1, EN 300 328:V1.7.1, EN 301 Industry Canada Statement 489-17:V2.1.1, EN 302 291-2:V1.1.1 and EN 60950-1:2006 +A11:2009+A1:2010, following This Class B digital apparatus complies with the provisions of Radio Equipment and Canadian ICES-003. Telecommunication Terminal Equipment Cet appareil numérique de la classe B est Directive 1999/5/EC conforme á la norme NMB-003 du Canada. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two Lund, December 2011 conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Pär Thuresson Chief Quality Officer Head of Quality & Validation

Appendix/Index 218 Continued on next page We fulfill the requirements of the R&TTE This licence exists throughout the useful life Directive (1999/5/EC) of this Device. It can be terminated by transferring your rights to the Device to a third party in writing. End User Licence Failure to comply with any of these terms and Agreement conditions will terminate the licence immediately. Sony Ericsson and its third party suppliers End User Licence Agreement and licensors retain all rights, title and interest Software delivered with this device and its in and to the Software. To the extent that the media is owned by Sony Ericsson Mobile Software contains material or code of a third Communications AB, and/or its affiliated party, such third parties shall be beneficiaries companies and its suppliers and licensors. of these terms. Sony Ericsson grants you a non-exclusive This licence is governed by the laws of limited licence to use the Software solely in Sweden. When applicable, the foregoing conjunction with the Device on which it is applies to statutory consumer rights. installed or delivered. Ownership of the In the event Software accompanying or Software is not sold, transferred or otherwise provided in conjunction with your device is conveyed. provided with additional terms and Do not use any means to discover the source conditions, such provisions shall also govern code or any component of the Software, your possession and usage of the Software. reproduce and distribute the Software, or modify the Software. You are entitled to transfer rights and obligations to the Software to a third party, solely together with the Device with which you received the Software, provided the third party agrees in writing to be bound by the terms of this Licence.

Appendix/Index 219 About Open Source Export Controls and Software Regulations

This product and its accessories may be About Open Source Software covered and controlled by Japan's export This product includes certain open source or control regulations ("Foreign Exchange and other software originating from third parties Foreign Trade Law" and related laws and that is subject to the GNU General Public regulations). If you wish to export this product License (GPL), GNU Library/Lesser General and/or its accessories, you must complete Public License (LGPL) and different and/or the necessary procedures at your own additional copyright licenses, disclaimers responsibility and cost. For details about the and notices. The exact terms of GPL, LGPL procedure, contact the Ministry of Economy, and some other licenses, disclaimers and Trade and Industry. notices are reproduced in the about box in this product and are also available at http:// opensource.sonyericsson.com. Intellectual Property Right About the Copyright and Portrait Sony Ericsson offers to provide source code rights of software licensed under the GPL or LGPL or some other open source licenses allowing Copyrighted contents you recorded or source code distribution to you on a CD-ROM obtained from sites or Internet home pages for a charge covering the cost of performing using this product by downloading or other such distribution, such as the cost of media, means, such as documents, images, music shipping and handling, upon written request data, software, are prohibited from to Sony Ericsson Mobile Communications AB, reproduction, transformation and Open Source Software Management, Nya transmission over public lines without Vattentornet, SE-221 88 Lund, Sweden. This consent of the copyright holders, unless offer is valid for a period of three (3) years intended for personal use or any other from the date of the distribution of this purpose permitted by law. product by Sony Ericsson.

Appendix/Index 220 Continued on next page Note that some performances, shows, and ･ "Liquid Identity" logo, "Xperia", "PlayNow", exhibitions may not allow photography, movie "Timescape" and "TrackID" are trademarks shooting, or sound recording even for or registered trademarks of Sony Ericsson personal use. Mobile Communications AB. You should also refrain from taking a picture ･ "APPNAVI" is a registered trademark of Sony of other people and disclosing it by such Ericsson Mobile Communications Japan, means as posting it on a site on the Internet Inc. without their consent because of possible ･ A technology of Gracenote Mobile infringement of their right of portrait. MusicID is used for "TrackID". "Gracenote" and "Gracenote Mobile Trademarks MusicID" are trademarks or registered The company names and product names trademarks of Gracenote, Inc. appearing in this manual are trademarks or ･ "Media Go" is a trademark or registered registered trademarks of their respective trademark of Sony Electronics Inc. holders. ･ "PlayStation" is a registered trademark of ･ "FOMA", "i-mode", "i-Dppli", "Deco-mail", "sp- Sony Computer Entertainment Inc. mode", "WORLD WING", "WORLD CALL", ･ "POBox" and "Sony" are trademarks or "ToruCa", "mopera" and "mopera U" are registered trademarks of Sony Corporation. trademarks or registered trademarks of NTT ･ "POBox" is a co-developed technology of DOCOMO, INC. Sony Computer Science Laboratories, Inc. ･ "Bluetooth" is a registered trademark of and Sony Ericsson Mobile Communications Bluetooth SIG. INC., and Sony Ericsson is Japan, Inc. licensed to use them. ･ "xLOUD" is a trademark of Sony ･ "Wi-Fi" is a registered trademark of Wi-Fi Corporation. Alliance. ･ microSDHC logo is a trademark of ･ "Catch Phone (Call waiting service)" is a SD-3C, LLC. registered trademark of Nippon Telegraph ･ "Twitter" is a trademark or registered and Telephone Corporation. trademark of Twitter, Inc. ･ Rovi, G-GUIDE, G-GUIDE MOBILE and their ･ "3GPP" is a trademark or registered logos are registered trademarks in Japan of trademark of ETSI. U.S. Rovi Corporation and/or its affiliates.

Appendix/Index 221 Continued on next page ･ "Google", "Google Maps", YouTube" and ･ Contains Adobe® Flash® Player technology "YouTube" logo are trademarks or registered by Adobe Systems Incorporated. All rights trademarks of Google, Inc. reserved. ･ "Facebook" is a trademark or registered Adobe Flash Player Copyright© 1996-2011 trademark of Facebook, Inc. Adobe Systems Incorporated. All rights ･ "Ericsson" is a trademark or registered reserved. trademark of Telefonaktiebolaget LM Adobe, Flash and Flash logo are either Ericsson. registered trademarks or trademarks of ･ mixi and mixi logo are registered Adobe Systems Incorporated in the United trademarks of mixi, Inc. States and/or other countries. ･ DLNA is a trademark or ･ This product is licensed under the MPEG-4 registered trademark of the visual and AVC patent portfolio license for the Digital Living Network Alliance. personal and non-commercial use of a ･ "Microsoft", "Windows", "Outlook", "Windows consumer for (i) encoding video in Vista", "Windows Server", "Windows Media" compliance with the MPEG-4 visual standard and "ActiveSync" are trademarks or ("MPEG-4 video") or the AVC standard ("AVC registered trademarks of Microsoft video") and/or (ii) decoding MPEG-4 or AVC Corporation in the United States and other video that was encoded by a consumer countries. engaged in a personal and non-commercial ･ This product is protected by certain activity and/or was obtained from a video intellectual property rights of Microsoft. Use provider licensed by MPEG LA to provide or distribution of such technology outside of MPEG-4 and/or AVC video. No license is this product is prohibited without a license granted or shall be implied for any other use. from Microsoft. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained MPEG LA, L.L.C. ("See http://www.mpegla.com"). MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson.

Appendix/Index 222 Continued on next page ･ Java, JavaScript and Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. ･ End-user license agreement for Sun Java Platform, Micro Edition. 1. Restrictions: Software is confidential copyrighted information of Sun and title to all copies is retained by Sun and/or its licensors. Customer shall not modify, decompile, disassemble, decrypt, extract, or otherwise reverse engineer Software. Software may not be leased, assigned, or sublicensed, in whole or in part. ･ Other product and company names mentioned herein may be the trademarks of their respective owners. In context, TM and ® mark are omitted. ･ Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners.

Appendix/Index 223 Index

A B About phone ...... 121 Backlight Access point Turn off ...... 106 Initialize ...... 94 Turn on...... 35, 113 Settings ...... 93 Battery pack ...... 31 Accessibility...... 120 BeeTV ...... 52 Account settings Bluetooth...... 143 Facebook ...... 115 Device name...... 144 Google ...... 114 Pair setting...... 144 Accounts & sync ...... 114 BOOK Store 2Dfacto ...... 49 Activate auto-sync ...... 114, 116 Bookmark...... 136 Airplane mode...... 95 Bookmark a web page ...... 136 Alarm...... 181 Edit...... 137 Set an alarm ...... 182 Open...... 137 Android Market ...... 168 Books, comics E★EVERYSTAR...... 53 Uninstall ...... 55, 113 Browser...... 133 Application button...... 48 Adjust settings ...... 135 Applications ...... 48, 111 Auto-fit a web page ...... 135 Icon ...... 49 Close...... 134 Manage ...... 112 Copy text ...... 135 Sort...... 55 Display...... 134 APPNAVI ...... 51 Exit ...... 133 Area Mail ...... 132 Go back to the previous page ...... 133 Auto-rotate screen ...... 105 Move ...... 133 Open...... 133 Open a new browser window ...... 134 Search for text...... 134 Set the home page ...... 135 Switch between browser windows...... 134 Zoom in/out...... 134 Browsing history ...... 137

Appendix/Index 224 C Use PC...... 32 Chat ...... 131 Calculator...... 50 Checkbox ...... 41 Calendar ...... 179 Clock...... 181 Create a schedule...... 180 Connected devices (Media server) ...... 147 Display a schedule ...... 180 Contact Picker 2.3 ...... 58, 69 Call ...... 71 Contacts Decline ...... 73, 74 Add a contact ...... 77 End...... 72 Delete ...... 79 Make ...... 71, 74 Edit...... 78 Mute ...... 75 Export ...... 83, 84 On hold ...... 75 Favorites ...... 80 Receive ...... 73, 74 Import ...... 83, 84 Speaker...... 75 Information filter ...... 82 Call Forwarding Service...... 90 Link contacts ...... 79 Call log...... 75 Make a call ...... 79 Add to contacts...... 76 Myself ...... 79 Delete...... 76 Search...... 78 Make a call...... 75 Send a contact ...... 80 Call settings ...... 102 Set a photo ...... 81 Call Waiting ...... 88 Caller ID Notification ...... 91 D Camera ...... 150 In-camera...... 152, 156 Data synchronization ...... 116 Record videos...... 155 Activate auto-sync ...... 116 Settings (Still camera) ...... 153 Date & time ...... 120 Settings (Video recording) ...... 157 Display...... 105 Take photos...... 151 docomo market...... 169 Campaign Navi ...... 54 Character entry E Character mode ...... 58, 61, 64 Ear speaker volume...... 74 Input method...... 58, 61, 64 Early warning "Area Mail"...... 132 Settings ...... 65 eco mode...... 52 Charge ...... 29 Email ...... 124 Use AC Adapter...... 32 Delete ...... 128

Appendix/Index 225 Forward ...... 127 GPS Function...... 174 Receive ...... 126 Enable GPS function...... 175 Reply ...... 127 Enable Wireless networks to find position Save attachment file...... 127 ...... 175 Send...... 125 Setup...... 124 H Email account Home screen ...... 42 Add ...... 129 Change ...... 128 I Remove ...... 129 i-Channel ...... 49 Emergency call ...... 71 Index letter...... 41 Evernote Launcher...... 53 Initial settings...... 35 F International call ...... 72 International roaming...... 53, 186 Facebook ...... 115 Delete...... 116 J Fixed phrase ...... 58, 69 Japanese keyboard...... 56 G Japanese syllabary keyboard ...... 64 G Guide program table...... 54 K Gallery...... 160 Key...... 39 Play (video) ...... 163 Key lock ...... 35 Slideshow (Photo) ...... 162 Koe-no-Takuhaibin...... 49 View (Photo) ...... 162 Games...... 148 L Games & apps ...... 183 Gmail...... 131 Landscape view ...... 106 Google Map ...... 176 Language & keyboard...... 119 Current location...... 176 life.episode ...... 184 Directions ...... 178 Link ...... 136 Google Latitude ...... 179 LiveWareTM manager ...... 52 Layer ...... 177 Location ...... 174 Street view...... 176 Location & security ...... 106 Google Talk ...... 131

Appendix/Index 226 M N Map Application...... 53 Network connection settings ...... 93 McDonald’s ...... 53 Network mode ...... 190 Media Go ...... 142 News & Weather ...... 51 Install...... 142 Notification icon ...... 37 Playlist ...... 167 Notification LED ...... 38 Transfer data ...... 143 Notification panel...... 38 melodycall...... 49 Notification ringtone...... 105 Message (SMS)...... 122 Add new contact...... 123 O Delete message ...... 124 OfficeSuite ...... 183 Delete threads...... 124 Own number ...... 7, 79, 121 Receive ...... 123 Send...... 122 P Settings ...... 123 microSD card ...... 28 PC Companion ...... 139 Format...... 118 Phone language ...... 119 microUSB cable ...... 138 Phonebook...... 76 Missed calls ...... 75 PhoneBookCopy...... 84 mixi...... 170 PIN code...... 108 Mobage...... 53 PlayNow...... 184 mopera U ...... 95 PlayStation pocket ...... 51, 149 mopera U mail...... 130 POBox Touch User Guide...... 70 mora touch...... 184 Privacy ...... 117 Move data ...... 138 PS Store ...... 53 Music player...... 165 PUK (PIN Unblocking Key)...... 108 Play ...... 165 Playlist ...... 167 Q Share...... 166 QWERTY keyboard ...... 58 Myself...... 79 R Radio button ...... 41 Rakuten auction...... 53 Record videos ...... 155

Appendix/Index 227 Remaining battery level ...... 30, 121 T Reset...... 117 Take photos ...... 151 Ringtone settings ...... 104 Theme...... 46 Ringtone volume ...... 74, 104 Timescape ...... 170 S Filter ...... 172 Reply to an SMS message ...... 173 Schedule Settings...... 171, 173 Create ...... 180 Tiles ...... 171 Display ...... 180 View a tile...... 172 Screen brightness...... 105 ToruCa ...... 184 Screen lock ...... 109 Touch screen ...... 39 Change ...... 110 Drag...... 40 Settings ...... 109 Flick ...... 40 Screenshot ...... 158 Pinch...... 40 SE Store ...... 184 Tap ...... 40 Search...... 47 Touch ...... 40 Security code Touch tone ...... 105 Network security code ...... 107 TrackID...... 168 PIN code ...... 108 Transfer data...... 138 Setting menu...... 93 Troubleshooting ...... 193 Setup guide...... 35 Turn power on/off ...... 34 Shortcut...... 43 Twitter...... 53, 170 Silent mode ...... 103 Twonky Special ...... 53 Software keyboard ...... 56 Software update...... 201 U Sound...... 103 UIM ...... 21, 27 Specific Absorption Rate (SAR)...... 206 PIN ...... 108 Specifications...... 203 Update center...... 201 sp-mode...... 95 USB connection...... 32, 138 sp-mode mail ...... 122 USB tethering ...... 100 Status bar...... 36 User dictionary ...... 67 Status icon ...... 36 Back up and restore ...... 69 Stereo Headset with Microphone...... 73, 159 My words English...... 68 Storage...... 118 My words Japanese...... 68

Appendix/Index 228 V Vibrate...... 103, 124, 181, 182 Video Unlimited...... 185 VirusScan (docomo Anshin Scan) ...... 54 Voice input & output...... 119 Voice Mail Service...... 86 Volume adjust...... 104 VPN ...... 101 W Wallpaper...... 46 Widget...... 43 Wi-Fi ...... 96 Wi-Fi tethering ...... 101 Wireless & networks...... 93 Word suggestion...... 67 Words by learning...... 68 WORLD CALL ...... 72 WORLD WING...... 186 X Xperia PLAY ...... 52, 148 Y YouTube ...... 163 Numerics 12 key keyboard ...... 61

Appendix/Index 229 Make various applications or charge your billing plan, check your charges and points, and more online. My docomo (http://www.mydocomo.com/) ⇒ 各種お申込・お手続き (Various applications/procedures) *In Japanese only. * "docomo ID and password" are required for use. * Please contact "General Inquiries" described on the last page of this manual if you forget or do not have "docomo ID and password". * May not be available in some cases depending on the conditions of your subscription. * There are cases where the site may not be available due to system maintenance, etc.

Don't forget your mobile phone ... or your manners! Remember to be courteous to others when you use your terminal. Turn the power off when you are: Keep your voice and ring tone down ■ In places where use is prohibited ■ Keep your voice down in quiet places like Be sure to switch the power off in an aircraft or a restaurants and hotel lobbies. hospital. ■ If you are in an outdoor public place, make sure * Turn off your terminal even in hospital lobbies you do not disturb others. and waiting rooms as well as hospital wards if Respect privacy electronic medical devices may be in use near Please be considerate of the privacy of you. individuals around you when taking and ■ In crowded places such as peak-hour trains if sending photos using camera-equipped implanted electronic medical devices may be in mobile phones. use near you Have good manners Radio waves emitted by the terminal may adversely affect implanted pacemakers and ICDs The terminal is equipped with useful functions when used in close proximity. not to answer an incoming call or to mute the ■ Driving sound. Using a handheld mobile phone while driving will [Vibrate] (P.103) result in a penalty. Vibrates when there is an incoming call. However, absolutely necessary cases such as rescue of a sick person or maintaining public's [Silent mode] (P.103) safety are exempted. Silent mode mutes the sounds of the terminal such ■ In places such as theaters, cinemas, and art as the keypad sounds and the ring tone. galleries * Shutter sound cannot be muted. Using the terminal in a public place, where you You can also use optional services such as the need to be quiet, annoys people around you. Voice Mail Service (P.86) and Call Forwarding Service (P.90). General Inquiries Repairs 0120-005-250 (toll free) ■From DOCOMO mobile phones (In Japanese only) *Service available in: English, Portuguese, Chinese, Spanish, Korean. (No prefix) 113 (toll free) *Unavailable from part of IP phones. *Unavailable from land-line phones, etc. (Business hours: 9:00 a.m. to 8:00 p.m.) ■From land-line phones (In Japanese only) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) 0120-800-000 (toll free) *Unavailable from part of IP phones. *Unavailable from land-line phones, etc. (Business hours: 24 hours (open all year round)) ■From land-line phones (In Japanese only) 0120-800-000 (toll free) *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m. (open all year round)) ●Please confirm the phone number before you dial. ●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website. NTT DOCOMO website http://www.nttdocomo.co.jp/english/

Loss or theft of the terminal or payment of cumulative cost overseas Failures encountered overseas (available 24 hours a day) (available 24 hours a day) From DOCOMO mobile phones From DOCOMO mobile phones

International call access code International call access code for the country you stay -81-3-6832-6600* (toll free) for the country you stay -81-3-6718-1414* (toll free) *You are charged a call fee to Japan when calling from a land-line phone, etc. *You are charged a call fee to Japan when calling from a land-line phone, etc. *If you use SO-03D, you should dial the number +81-3-6832-6600 *If you use SO-03D, you should dial the number +81-3-6718-1414 (to enter '＋', touch and hold '0'). (to enter '＋', touch and hold '0'). From land-line phones From land-line phones

Universal number international Universal number international prefix -8000120-0151* prefix -8005931-8600* *You might be charged a domestic call fee according to the *You might be charged a domestic call fee according to the call rate for the country you stay. call rate for the country you stay. *For international call access codes for major countries and *For international call access codes for major countries and universal number international prefix, refer to DOCOMO universal number international prefix, refer to DOCOMO International Services website. International Services website. ●If you lose your terminal or have it stolen, immediately take the steps necessary for suspending the use of the terminal. ●If the terminal you purchased is damaged, bring your terminal to a repair counter specified by DOCOMO after returning to Japan. Don’t forget your mobile phone・・・or your manners! Sales: NTT DOCOMO, INC. When using your mobile phone in a public place, don’t forget to show ٧ common courtesy and consideration for others around you. Manufacturer: Sony Ericsson Mobile To prevent damage to the environment, bring used battery packs to a Communications Japan, Inc docomo service counter, a docomo agent or a recycle center. Li-ion 00 ’11. October (1st Edition) 1255-3782.1 Sony Ericsson Consumer Web site • For optimum performance, the product should not be Use of charging devices that are not Sony Ericsson branded may At www.sonyericsson.com/support there is a support section operated in temperatures below -10°C(+14°F) or above pose increased safety risks. where help and tips are only a few clicks away. Here you will find +45°C(+113°F). Do not expose the battery to the latest computer software updates and tips on how to use your temperatures above +60°C(+140°F). Battery product more efficiently. • Do not expose to flames or lit tobacco products. New or idle batteries can have short-term reduced capacity. Fully • Do not drop, throw or try to bend the product. charge the battery before initial use. Use for the intended purpose • Do not paint or attempt to disassemble or modify the only. Charge the battery in temperatures between +5°C(+41°F) Service and support product. Only Sony Ericsson authorised personnel and +45°C(+113°F). Do not put the battery into your mouth. Do not You have access to a portfolio of exclusive service advantages should perform service. let the battery contacts touch another metal object. Turn off the such as: • Consult with authorised medical staff and the instructions of the product before removing the battery. Performance depends on • Global and local Web sites providing support. medical device manufacturer before using the product near temperatures, signal strength, usage patterns, features selected • A global network of Contact Centers. pacemakers or other medical devices or equipment. and voice or data transmissions. Only Sony Ericsson service • An extensive network of Sony Ericsson service partners. • Discontinue use of electronic devices, or disable the radio partners should remove or replace built-in batteries. Use of • A warranty period. Learn more about the warranty conditions in transmitting functionality of the device, where required or batteries that are not Sony Ericsson branded may pose increased theLimited warrantysection. requested to do so. safety risks. Replace the battery only with another Sony Ericsson At www.sonyericsson.com/support, you can find the latest • Do not use where a potentially explosive atmosphere exists. battery that has been qualified with the product per the standard support tools and information. For operator-specific services and • Do not place the product, or install wireless equipment, in the IEEE-1725. Use of an unqualified battery may present a risk of fire, features, please contact your network operator. area above an air bag in a car. explosion, leakage or other hazard. You can also contact our Contact Centers. If your country/region • Caution: Cracked or broken displays may create sharp edges or Important information is not represented in the list below, please contact your local splinters that could be harmful upon contact. Personal medical devices dealer. (Calls are charged according to national rates, including • Do not use the Bluetooth Headset in positions where it is Mobile phones may affect implanted medical equipment. Reduce local taxes, unless the phone number is a toll-free number.) uncomfortable or will be subject to pressure. risk of interference by keeping a minimum distance of If your product needs service, please contact the dealer from 15 cm(6 inches) between the phone and the device. Use the phone whom it was purchased, or one of our service partners. For Children at your right ear. Do not carry the phone in your breast pocket. warranty claims, save proof of purchase. Warning! Keep out of the reach of children. Do not allow Turn off the phone if you suspect interference. For all medical children to play with mobile phones or accessories. They could devices, consult a physician and the manufacturer. hurt themselves or others. Products may contain small parts that Guidelines for Safe and Efficient Use could become detached and create a choking hazard. Driving Please follow these guidelines. Failure to do so might entail a Some vehicle manufacturers forbid the use of phones in their potential health risk or product malfunction. If in doubt as to Power supply (Charger) vehicles unless a handsfree kit with an external antenna supports its proper function, have the product checked by a certified service Connect the charger to power sources as marked on the product. the installation. Check with the vehicle manufacturer's partner before charging or using it. Do not use outdoors or in damp areas. Do not alter or subject the representative to be sure that the mobile phone or Bluetooth cord to damage or stress. Unplug the unit before cleaning it. Never handsfree will not affect the electronic systems in the vehicle. Full Recommendations for care and safe use of our products alter the plug. If it does not fit into the outlet, have a proper outlet attention should be given to driving at all times and local laws and • Handle with care and keep in a clean and dust-free place. installed by an electrician. When a power supply is connected regulations restricting the use of wireless devices while driving • Warning! May explode if disposed of in fire. there is a small drain of power. To avoid this small energy waste, must be observed. • Do not expose to liquid or moisture or excess humidity. disconnect the power supply when the product is fully charged. 2 3 4

GPS/Location based functions February 15, 2011 18:05:56 phone. The SAR value is determined at theFebruary highest 15, 2011certified 18:05:56 power Accessories February 15, 2011 18:05:56 Memory cards are generally formatted priorFebruary to 15, shipping. 2011 18:05:56 To Some products provide GPS/Location based functions. Location level in laboratory conditions, but because the phone is designed Use only Sony Ericsson branded original accessories and certified reformat the memory card, use a compatible device. Do not use determining functionality is provided “As is” and “With all faults”. to use the minimum power necessary to access the chosen service partners. Sony Ericsson does not test third-party the standard operating system format when formatting the memory Sony Ericsson does not make any representation or warranty as to network, the actual SAR level can be well below this value. There is accessories. Accessories may influence RF exposure, radio card on a PC. For details, refer to the operating instructions of the the accuracy of such location information. no proof of difference in safety based on difference in SAR value. performance, loudness, electric safety and other areas. Third- device or contact customer support. Use of location-based information by the device may not be Products with radio transmitters sold in the US must be certified party accessories and parts may pose a risk to your health or uninterrupted or error free and may additionally be dependent on by the Federal Communications Commission (FCC). When safety or decrease performance. Warning! network service availability. Please note that functionality may be required, tests are performed when the phone is placed at the ear If the device requires an adapter for insertion into the handset or reduced or prevented in certain environments such as building and when worn on the body. For body-worn operation, the phone Accessible Solutions/Special Needs another device, do not insert the card directly without the required interiors or areas adjacent to buildings. has been tested when positioned a minimum of 15 mm from the In the US, compatible Sony Ericsson phones may offer adapter. Caution: Do not use GPS functionality in a manner which causes body without any metal parts in the vicinity of the phone or when compatibility with TTY terminals (with use of necessary accessory). distraction from driving. properly used with an appropriate Sony Ericsson accessory and For more information call the Sony Ericsson Special Needs Center Precautions on memory card use worn on the body. on 877 878 1996 (TTY) or 877 207 2056 (voice), or go to • Do not expose the memory card to moisture. Emergency calls For more information about SAR and radio frequency exposure, www.sonyericsson-snc.com. • Do not touch terminal connections with your hand or any metal Calls cannot be guaranteed under all conditions. Never rely solely go to: www.sonyericsson.com/health. object. upon mobile phones for essential communication. Calls may not be Disposal of old electrical and electronic equipment • Do not strike, bend, or drop the memory card. possible in all areas, on all networks, or when certain network Flight mode Electronic equipment and batteries should not be included • Do not attempt to disassemble or modify the memory card. services and/or phone features are used. Bluetooth and WLAN functionality, if available in the device, can be as household waste but should be left at an appropriate collection • Do not use or store the memory card in humid or corrosive enabled in Flight mode but may be prohibited onboard aircraft or in point for recycling. This helps prevent potential negative locations or in excessive heat such as a closed car in summer, in Antenna other areas where radio transmissions are prohibited. In such consequences for the environment and human health. Check local direct sunlight or near a heater, etc. Use of antenna devices not marketed by Sony Ericsson could environments, please seek proper authorisation before enabling regulations by contacting your local city office, your household • Do not press or bend the end of the memory card adapter with damage the phone, reduce performance, and produce SAR levels Bluetooth or WLAN functionality even in Flight mode. waste disposal service, the shop where you purchased the product excessive force. above the established limits. Do not cover the antenna with your or calling a Sony Ericsson Contact Center. Do not attempt to • Do not let dirt, dust, or foreign objects get into the insert port of hand as this affects call quality, power levels and can shorten talk Malware remove internal batteries. Internal batteries shall be removed only any memory card adapter. and standby times. Malware (short for malicious software) is software that can harm by a waste treatment facility or trained service professional. • Check you have inserted the memory card correctly. the mobile phone or other computers. Malware or harmful • Insert the memory card as far as it will go into any memory card Radio Frequency (RF) exposure and Specific Absorption applications can include viruses, worms, spyware, and other Disposing of the battery adapter needed. The memory card may not operate properly Rate (SAR) unwanted programs. While the device does employ security Check local regulations or call a Sony Ericsson Contact unless fully inserted. When the phone or Bluetooth handsfree is turned on, it emits low measures to resist such efforts, Sony Ericsson does not warrant or Center for information. Never use municipal waste. • We recommend that you make a backup copy of important data. levels of radio frequency energy. International safety guidelines represent that the device will be impervious to the introduction of We are not responsible for any loss or damage to content you have been developed through periodic and thorough evaluation of malware. You can however reduce the risk of malware attacks by Memory card store on the memory card. scientific studies. These guidelines establish permitted levels of using care when downloading content or accepting applications, If the product comes complete with a removable memory card, it is • Recorded data may be damaged or lost when you remove the radio wave exposure. The guidelines include a safety margin refraining from opening or responding to messages from unknown generally compatible with the handset purchased but may not be memory card or memory card adapter, turn off the power while designed to assure the safety of all persons and to account for any sources, using trustworthy services to access the Internet, and compatible with other devices or the capabilities of their memory formatting, reading or writing data, or use the memory card in variations in measurements. only downloading content to the mobile phone from known, cards. Check other devices for compatibility before purchase or locations subject to static electricity or high electrical field Specific Absorption Rate (SAR) is used to measure radio reliable sources. use. If the product is equipped with a memory card reader, check emissions. frequency energy absorbed by the body when using a mobile memory card compatibility before purchase or use. 5 6 7 8

Protection of personal information February 15, 2011 18:05:57 This licence is governed by the laws of Sweden.February 15, 2011When 18:05:57 Sony Ericsson Contact Center (national ratesFebruary may 15, 2011 apply) 18:05:57 or visit February 15, 2011 18:05:57 Erase personal data before disposing of the product. To delete applicable, the foregoing applies to statutory consumer rights. www.sonyericsson.com to get further information. data, perform a master reset. Deleting data from the phone In the event Software accompanying or provided in conjunction memory does not ensure that it cannot be recovered. with your device is provided with additional terms and conditions, Our warranty Sony Ericsson does not warrant against recovery of information such provisions shall also govern your possession and usage of Subject to the conditions of this Limited Warranty, Sony Ericsson and does not assume responsibility for disclosure of any the Software. warrants this Product to be free from defects in design, material information even after a master reset. and workmanship at the time of its original purchase by a consumer. This Limited Warranty will last for a period of two (2) Loudness warning! Export regulations years as from the original date of purchase of the Product for your Avoid volume levels that may be harmful to your hearing. Export regulations: Goods delivered under this Agreement may be mobile phone, and for a period of one (1) year following the original the subject to import and export regulations of the European purchase date of the Product for all original accessories (such as Union, the United States and other countries. Purchaser will the battery, charger or handsfree kit) which may be delivered with End User Licence Agreement comply with these applicable laws and regulations and will obtain your mobile phone. Software delivered with this device and its media is owned by and maintain any export and import license required for the Sony Ericsson Mobile Communications AB, and/or its affiliated delivery of goods to Purchaser under this Agreement. Without What we will do companies and its suppliers and licensors. limiting the foregoing, and as an example, Purchaser will not If, during the warranty period, this Product fails to operate under Sony Ericsson grants you a non-exclusive limited licence to use knowingly export or re-export goods to destinations identified normal use and service, due to defects in design, materials or the Software solely in conjunction with the Device on which it is pursuant to Articles in Chapter II of European Council Regulation workmanship, Sony Ericsson authorised distributors or service installed or delivered. Ownership of the Software is not sold, (EC) 428/2009 and specifically, and without limitation, Purchaser partners, in the country/region* where you purchased the Product, transferred or otherwise conveyed. will also comply with U.S. government Export Administration will, at their option, either repair or replace the Product in Do not use any means to discover the source code or any Regulations (“EAR”, 15 C.F.R. §§ 730-774, http:// accordance with the terms and conditions stipulated herein. www.sonyericsson.com component of the Software, reproduce and distribute the www.bis.doc.gov/) administered by Department of Commerce, Sony Ericsson and its service partners reserve the right to Software, or modify the Software. You are entitled to transfer rights Bureau of Industry and Security and economic sanctions charge a handling fee if a returned Product is found not to be under and obligations to the Software to a third party, solely together regulations (30 C.F.R. §§ 500 et. seq., http://www.treas.gov/ warranty according to the conditions below. with the Device with which you received the Software, provided the offices/enforcement/ofac/) administered by the U.S. Department Please note that some of your personal settings, downloads and third party agrees in writing to be bound by the terms of this of Treasury, Office of Foreign Assets Control. other information may be lost when your Sony Ericsson Product is Licence. repaired or replaced. At present, Sony Ericsson may be prevented This licence exists throughout the useful life of this Device. It can Limited Warranty by applicable law, other regulation or technical restrictions from be terminated by transferring your rights to the Device to a third making a backup copy of certain downloads. Sony Ericsson does Sony Ericsson Mobile Communications AB, SE-221 88 Lund, party in writing. not take any responsibility for any lost information of any kind and Sweden, (Sony Ericsson) or its local affiliated company, provides Failure to comply with any of these terms and conditions will will not reimburse you for any such loss. You should always make this Limited Warranty for your mobile phone, original accessory terminate the licence immediately. backup copies of all the information stored on your Sony Ericsson Sony Ericsson and its third party suppliers and licensors retain delivered with your mobile phone, and/or your mobile computing Product such as downloads, calendar and contacts before Sony Ericsson Mobile Communications AB all rights, title and interest in and to the Software. To the extent product (hereinafter referred to as “Product”). handing in your Sony Ericsson Product for repair or replacement. SE-221 88 Lund, Sweden that the Software contains material or code of a third party, such Should your Product need warranty service, please return it to third parties shall be beneficiaries of these terms. the dealer from whom it was purchased, or contact your local

9 10 11 1222-9269.5

February 15, 2011 18:05:5721:53:57 February 15, 2011 18:05:57 February 15, 2011 18:05:57 February 15, 2011 18:05:58 Conditions 4. Since the cellular system on which the Product is to operate is of implied warranties, so the preceding limitations or exclusions Other product and company names mentioned herein may be the 1. This Limited Warranty is valid only if the original proof of provided by a carrier independent from Sony Ericsson, may not apply to you. trademarks of their respective owners. purchase for this Product issued by a Sony Ericsson authorised Sony Ericsson will not be responsible for the operation, The warranty provided does not affect the consumer’s statutory Any rights not expressly granted herein are reserved. dealer specifying the date of purchase and serial number**, is availability, coverage, services or range of that system. rights under applicable legislation in force, nor the consumer’s presented with the Product to be repaired or replaced. 5. This warranty does not cover Product failures caused by rights against the dealer arising from their sales / purchase Sony Ericsson reserves the right to refuse warranty service if this installations, modifications, or repair or opening of the Product contract. information has been removed or changed after the original performed by a non-Sony Ericsson authorised person. purchase of the Product from the dealer. 6. The warranty does not cover Product failures which have been *Geographical scope of the warranty 2. If Sony Ericsson repairs or replaces the Product, the repair for caused by use of accessories or other peripheral devices which If you have purchased your Product in a country member of the the defect concerned, or the replaced Product shall be warranted are not Sony Ericsson branded original accessories intended for European Economic Area (EEA) or in Switzerland or the Republic of for the remaining time of the original warranty period or for ninety use with the Product. Turkey, and such Product was intended for sale in the EEA or in (90) days from the date of repair, whichever is longer. Repair or Sony Ericsson disclaims any and all warranties, whether Switzerland or in Turkey, you can have your Product serviced in replacement may involve the use of functionally equivalent express or implied, for failures caused to the Product or any EEA country or in Switzerland or in Turkey, under the warranty reconditioned units. Replaced parts or components will become peripheral devices as a result of viruses, trojan horses, spyware, conditions prevailing in the country in which you require servicing, the property of Sony Ericsson. or other malicious software. Sony Ericsson strongly recommends provided that an identical Product is sold in such country by an 3. This warranty does not cover any failure of the Product due to that you install appropriate virus protection software on your authorised Sony Ericsson distributor. To find out if your Product is normal wear and tear, or due to misuse, including but not limited Product and any peripheral devices connected to it, as available, sold in the country you are in, please call the local Sony Ericsson to use in other than the normal and customary manner, in and update it regularly, to better protect your device. It is Contact Center. Please observe that certain services may not be accordance with the Sony Ericsson instructions for use and understood, however, that such software will never fully protect available outside the country of original purchase, for example, maintenance of the Product. Nor does this warranty cover any your Product or its peripheral devices and Sony Ericsson due to the fact that your Product may have an interior or exterior failure of the Product due to accident, software or hardware disclaims all warranties, whether express or implied, in case of which is different from equivalent models sold in other countries. modification or adjustment, acts of God or damage resulting from failure by such antivirus software to fulfil its intended purpose. Please note in addition that it may sometimes not be possible to liquid. 7. Tampering with any of the seals on the Product will void the repair SIM-locked Products. A rechargeable battery can be charged and discharged more warranty. ** In some countries/regions additional information (such as a than a hundred times. However, it will eventually wear out – this is 8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN valid warranty card) may be requested. not a defect and corresponds to normal wear and tear. When the OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. talk-time or standby time is noticeably shorter, it is time to ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION replace the battery. Sony Ericsson recommends that you use THE IMPLIED WARRANTIES OF MERCHANTABILITY OR Trademarks and acknowledgements only batteries and chargers approved by Sony Ericsson. FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE The Liquid Identity logo and Xperia are trademarks or registered Minor variations in display brightness and colour may occur DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL trademarks of Sony Ericsson Mobile Communications AB. between phones. There may be tiny bright or dark dots on the SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR Sony is a trademark or a registered trademark of Sony display. These are called defective pixels and occur when INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE Corporation. individual dots have malfunctioned and can not be adjusted. Two WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST Ericsson is a trademark or registered trademark of defective pixels are deemed acceptable. PROFITS OR COMMERCIAL LOSS TO THE FULL EXTENT Telefonaktiebolaget LM Ericsson. Minor variations in camera image appearance may occur THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Bluetooth is a trademark or a registered trademark of Bluetooth between phones. This is nothing uncommon and is not regarded Some countries/states do not allow the exclusion or limitation of SIG Inc. and any use of such mark by Sony Ericsson is under as a defective camera module. incidental or consequential damages, or limitation of the duration license. 12 13 14 15

Support February 15, 2011 18:05:57 Costa Rica 0 800 011 0400 [email protected] 15, 2011 18:05:57 +91 (011) February 15, 2011 18:05:58 Perú 0800-532-38 [email protected] 15, 2011 18:05:58 (número gratuito) 39011111 (número gratuito) Anguilla 1-800-080-9518 [email protected] Danmark 3331 2828 [email protected] Indonesia 021 2701388 [email protected] Philippines/ +63 2 7891860 [email protected] (Toll Free) Deutschland 0180 534 2020 [email protected] Ireland 1850 545 888 [email protected] Pilipinas Antigua and 1-800-081-9518 [email protected] (ortsübliche (Local rate) Polska +48 22 22 77 444 [email protected] Barbuda (Toll Free) Gebühren) Italia 06 48895206 [email protected] Portugal 808 204 466 [email protected] Argentina 0800-333-7427 [email protected] Dominica 1-800-085-9518 [email protected] (tariffa locale) (chamada local) (número gratuito) (Toll Free) Jamaica 1-800-442-3471 [email protected] República 1-800-751-3370 [email protected] Australia 1300 650-050 (Toll [email protected] Dominicana Ecuador 1-800-0102-50 [email protected] (Toll Free) (número gratuito) Free) România [email protected] (número gratuito) Κύπρος/ 0800 90 909 [email protected] +40 21 401 0401 The Bahamas 1-800-205-6062 [email protected] Eesti 06 032 032 [email protected] Kıbrıs Saint Kitts 1-800-087-9518 [email protected] (Toll Free) and Nevis ([email protected] Latvija 67 21 43 01 [email protected] (Toll Free 16727 مصر/Egypt Barbados 1-800-082-9518 [email protected] Saint Vincent [email protected] Ελλάδα 801 11 810 810 [email protected] Lietuva 8 700 55030 [email protected] 1-800-088-9518 (Toll Free) and the +30 210 899 19 19 Magyarország 01 880 47 47 [email protected] (Toll Free) Belgique/ [email protected] Grenadines 02-0745 1611 Malaysia [email protected] België (από κινητό 1800-88-9900 (Toll Schweiz/ 0848 824 040 [email protected] Belize AN 815, PIN 5597 [email protected] τηλέφωνο) Free / bebas tol) Suisse/ [email protected] Svizzera 344 2958 2 212+ المغرب/Toll Free) El Salvador 800-6323 (número [email protected] Maroc) Singapore +65 6744 0733 [email protected] Bermuda 1-800-083-9518 [email protected] gratuito) México 0 1800 000 4722 [email protected] Slovenia 01 600 5000 [email protected] (Toll Free) España 902 180 576 (tarifa [email protected] (número gratuito) Slovensko 02 5443 6443 [email protected] Bolivia 800-100-542 [email protected] local) Nederland 0900 8998318 [email protected] South Africa 0861 632222 [email protected] (número gratuito) France 09 69 32 21 21 [email protected] Nederlandse 001-866-509-8660 [email protected] Antillen South (+82) 1588 4170 [email protected] Brasil 4001-0444 [email protected] 09 69 32 21 22 (gratis nummer) orea/대한 (ligação gratuita) (Xperia™ New Zealand 0800-100-150 (Toll [email protected] Κ 민국 Canada 1 866 766 9374 [email protected] uniquement) Free) Guatemala [email protected] Suomi 09 299 2000 [email protected] (Toll Free / sans 1-800-300-0057 Nicaragua AN 1800-0166, [email protected] Sverige 013 24 45 00 (lokal [email protected] frais) (número gratuito) PIN 5600 (número Haïti/Ayiti [email protected] taxa) Cayman 1-800-084-9518 [email protected] AN 193, PIN 5598 gratuito) Trinidad and 1-800-080-9521 [email protected] Islands (Toll Free) (numéro gratuit / Norge 815 00 840 [email protected] Tobago (Toll Free) Central and +27 11 506 0123 [email protected] nimewo gratis) (lokaltakst) Southern Honduras AN 8000122, PIN [email protected] Österreich 0810 200 245 [email protected] Türkiye +90 212 473 77 77 [email protected] Africa 5599 (número Pakistan/ 021 - 111 22 55 73 [email protected] United 08705 237 237 [email protected] [email protected] Kingdom (Local rate) پاکستان (Česká 844 550 055 gratuito republika Hong Kong/ +852 8203 8863 [email protected] Panamá 00800-787-0009 [email protected] United States 1 866 766 9374 [email protected] Chile 800-646-425 [email protected] 香港 (número gratuito) Uruguay 000-401-787-013 [email protected] (número gratuito) Hrvatska 062 000 000 [email protected] Paraguay 009 800 54 20032 [email protected] (número gratuito) Colombia [email protected] 01800-0966-080 India/ê 1800 11 1800 (Toll [email protected] (número gratuito) Venezuela 0-800-1-00-2250 [email protected] (número gratuito) Free) (número gratuito) 16 17 18 19

Việt Nam 1900 1525 (miễn [email protected] 15, 2011 18:05:58 February 15, 2011 18:05:58 February 15, 2011 18:05:58 February 15, 2011 18:05:58 phí) Беларусь 8 82 00 361 0001 [email protected] България 0800 1 8778 [email protected] Россия +7 (495) 7870986 [email protected] Україна (+380) 44 590 [email protected] 1515 [email protected] 880 3919 4 971+ الأردن [email protected] 880 3919 4 971+ الإمارات العربية (UAE) المتحدة [email protected] 880 3919 4 971+ الكويت [email protected] 727-8200-800 المملكة العربية السعودية 中国 +86 400 810 0000 [email protected] 台灣 +886 2 25625511 [email protected] ไทย 02 2483 030 [email protected]

February 15, 2011 18:05:5821:53:58 November 15, 2010 10:55:47 November 15, 2010 10:55:47 November 15, 2010 10:55:47