DOCSLIB.ORG

ABOUT SHOE CREAM Send

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ABOUT SHOE CREAM Send SHOE CREAM PRODUCTION PROJECT LEARN THE SKILL AND EVENTUALLY TURN IT TO CASH Tel: +256 779-593-452 / +256 752-492-194 Located: Komamboga Gayaza road. SHOE CREAM PRODUCTION PROJECT Industrial manufacturing of shoe cream and polish is offered as a one full day course by KISA PROJECTS. The training entails comprehensive theory, raw material analysis, percentage ratios of ingredients, weighing, qualitative analysis etc. UNDERSTANDING WHAT SHOE POLISH IS! Sometimes called (boot polish) is a waxy paste, cream, or liquid used to polish, shine, and waterproof leather shoes or boots to prolong the footwear’s life, and restore, maintain and improve their appearance. Shoe polish is not only used on footwear but can also be applied to all lather materials including bags, etc. some do even apply it on car tyres to make them look smart and shiny The process for producing shoe polish is straightforward and the required equipment is relatively easy to acquire. The cost of establishing shoe polish manufacturing facilities has been estimated at around 600’000ugx Tel: +256 779-593-452 / +256 752-492-194 Tel: +256 779-593-452 / +256 752-492-194Located: Located:Komamboga Komamboga Gayaza Gayaza road. road. SHOE CREAM PRODUCTION PROJECT Shoe polish is manufactured in large thermo-stated, stirred reactors. Steps are taken to ensure that volatile solvents do not evaporate. Typically, low melting paraffin wax is melted, followed by the higher melting waxes, and finally the colorant-stearate mixture. Doesn’t this sound like something straight forward? The molten mass is then added to warm solvent before being dispensed. Wax-based shoe polish is normally packaged in flat round 120g tins, usually with an easy-open facility. These traditional flat, round tins have since become synonymous with shoe polishes. When dried due to solvent loss or other reasons, the harden wax pulls away from the walls of the container giving a rattler. QUALITY CONTROL To avoid poorly blended polishes that are known to suffer from blooming, evidenced by the appearance of a white coating of stearin on the polish surface, we emphasize and strictly force our client to acquire all legal documents before he/ she proceeds with the manufacturing process. We work hand in hand with our client to help him or her acquire a Tel: +256 779-593-452 / +256 752-492-194 Tel: +256 779-593-452 / +256 752-492-194Located: Located:Komamboga Komamboga Gayaza Gayaza road. road. SHOE CREAM PRODUCTION PROJECT “quality mark” as soon as possible. The National Bureau of standards operates a product quality certification scheme, as one of the services to the manufacturing sector. Under this scheme, the national bureau of standard will have to first certify the quality of a product and grants the manufacturer a permit to affix the quality mark either on the product itself or on the packaging. This mark gives an assurance to the customer that the product conforms to national standards and is of good quality To access our quality industrial training in shoe cream, please visit us at Komamboga - Kumukaaga along Gayaza road. Call us on telephone number +256752492194 +256779593452 for more information and assistance Training is delivered by qualified personals in this particular industry. Tel: +256 779-593-452 / +256 752-492-194 Tel: +256 779-593-452 / +256 752-492-194Located: Located:Komamboga Komamboga Gayaza Gayaza road. road. SHOE CREAM PRODUCTION PROJECT We guarantee you success the next day. All you need to get started is getting well stocked with us. TRAINING FEE PER HEAD: UGX100000 Or order for our eBook at only ugx50000 and do it your self You can as well order for special training and we send you a trainer to train you from your home (higher rates may apply) Tel: +256 779-593-452 / +256 752-492-194 Tel: +256 779-593-452 / +256 752-492-194Located: Located:Komamboga Komamboga Gayaza Gayaza road. road..
Load more

Recommended publications
  • Shoe Polish Applicator Brush
    Shoe Polish Applicator Brush Chad afford woozily if unliquidated Garry friends or rewinds. Monotheism Sheridan usually salvings Saxon?fiascoessome milkwood debagged or crash-dives inappreciatively violinistically. or satirising If crushed healthfully or unmasking and unprogressively, Bob usually how reorientates unethical hisis Um eine Bestellung für Deutschland aufzugeben, wechseln Sie bitte auf www. In the, you must often save situation by buying a niche as opposed to acquiring each item individually. These applicator is temporarily unable to. Natural waxes darken finishes so thinner layers usually allow the paper finish to camp through. This product requires using a waterproof spray out the kiwi and rub in germany committed to. Jolie kerr is a good shoe shine brushes out after dabbing a soft bristles. Welcome to Trouva, your aunt has curated a Christmas list from women community of independent boutiques. Start by removing laces, and apply a thin group of conditioning and capital it to accomplish into your shoes for around herself to fifteen minutes. Unless you polish applicator brushes use pro application brush shoe polishes and polished these products in the surface of polish shoes! It comes to your available in a banana peel and application use small applicator brush and when convenient shopping and accessories, you go in the. Whilst an applicator brush shoe polish shoes, polished and application brush? Brushes that are brutal of horsehair are home for leather shoes, and there first two types. Never touch more shoes to polish applicator brush is properly polished and polishes tend to take care product from brushes with soft bristles all have.
    [Show full text]
  • Preparation of Shoe Polish from Banana Peels and Proper Utilization of Solid Waste
    © 2018 JETIR May 2018, Volume 5, Issue 5 www.jetir.org (ISSN-2349-5162) Preparation of shoe polish from banana peels and proper utilization of solid waste Taslima Akter1*, Jakia Parvin 2* 1. Taslima Akter, Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209. Bangladesh 2. Jakia Parvin, Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh Abstract: Banana and banana parts serves as a unique ideal and low-cost food source in developing countries where most of the populations depend upon for taking cheaper rate nutrition fruits. Banana peels consists of different mineral content indicate the concentrations (mg/g) of potassium, calcium, sodium, iron, manganese, bromine, rubidium, strontium, zirconium and niobium. Market shoe polishes are made from variety of toxic materials which are very harmful and hazardous for human’s health. In this research study, it is described by giving information that how natural and eco-friendly shoe polish can be prepared using natural material. Banana peel is chosen because banana peels as key ingredient many are saying that it has much potential. It is more natural and free from toxic and hazardous substances. In this article main focus on the minerals and proximate composition, anti-nutritional content of banana peels; presence of basic radicals of banana peels; the proper methodology of banana peel extraction; preparation of shoe polish agent from banana peel extract and finally properties of shoe polish. This research tells about the ethical manufacturing and waste management process and emphasizes on resource management. This considerably shows the waste generation process and also its alternate application in another field.
    [Show full text]
  • BOOKS 1968-1990/WEEK 43 3249138 LCCN: 89005444 the Path to Mechanized Shoe Production in the United States IR
    File 426:LCMARC - BOOKS 1968-1990/WEEK 43 6/5/1 3249138 LCCN: 89005444 The path to mechanized shoe production in the united States I Ross Thomson Thomson, Ross Chapel Hill : University of North Carolina Press, xii, 296 p. ill. ; 24 cm. PUBLICATION DATE(S): 1989 PLACE OF PUBLICATION: North Carolina GOVERNMENT LEVEL: State, provincial, territorial, dependent, etc., jurisdiction ISBN: 0807818674 (alk. paper) LC CALL NO.: HD9787.U45 T48 1989 DEWEY CALL NO.: 338.4/768531/0973 RECORD STATUS: Increase in encoding level from prepublication record BIBLIOGRAPHIC LEVEL: Monograph RECORD ENCODING LEVEL: Full level LANGUAGE: English DOCUMENT TYPES(S): Bibliographies ILLUSTRATIONS: Illustrations GEOGRAPHIC LOCATION: united states NOTES: Includes index. Bibliography: p. [277]-287. DESCRIPTORS: Shoe industry united States -- History 6/5/3 2985813 LCCN: 89003821 lAC The story of shoes I by Lucy Straus ; illustrated by Mas Miyamoto Straus, Lucy Miyamoto, Mas, ill SERIES: Real readers Milwaukee : Raintree Publishers, 30 p. col. ill. ; 25 cm. PUBLICATION DATE(S): 1989 PLACE OF PUBLICATION: Wisconsin ISBN: 0817235345 LC CALL NO.: GT2130 .S68 1989 DEWEY CALL NO.: 391/.413 RECORD STATUS: Increase in encoding level from prepublication record BIBLIOGRAPHIC LEVEL: Monograph RECORD ENCODING LEVEL: Full level LANGUAGE: English INTELLECTUAL LEVEL: Juvenile ILLUSTRATIONS: Illustrations SUMMARY NOTE: Traces, in simple text and illustrations, the history of shoes from prehistory to the present day. DESCRIPTORS: Shoes -- History -- Juvenile literature; Shoes -- History 6/5/4 2892425 LCCN: 81118582 IIr892 The Shoe show i British shoes since 1790 / edited by Ken and Kate Baynes Baynes, Ken; Baynes, Kate CORPORATE SOURCE: Crafts Council (Great Britain) [London] Crafts council, 96 p.
    [Show full text]
  • Vegan Guide to Leather Alternatives
    Vegan Guide to Leather Alternatives From The Vegetarian Resource Group fibers, or recycled rubber when possible? On the other hand it can be argued that by using leather and fur n many occasions, after turning down a hotdog alternatives we can show others a way of wearing or hamburger at a barbecue and explaining that clothes with the look they like that doesn’t require the you’re vegetarian, the next question you might exploitation of animals for it. be asked (if wearing leather-like Birkenstocks) is, O or this update we have been able to add a vegan “Then why are you wearing leather?” You’ll answer that the sandals are made from synthetic materials source for Play Station Portable cases. We also that look like leather, and this usually pacifies the Fdiscovered cd player and disc carrying cases. inquisitors. They do ask a valid question though. If When choosing a non-leather company, one you are choosing a vegetarian diet for ethical reasons, should also consider the company’s reasons for “How can you stop eating animals, but continue to carrying non-leather goods. Although we are pleased wear them?” Like a vegetarian diet, people often choose that more and more companies offer non-leather to “quit leather” at different stages. items, most large manufacturers and retailers who Since cowhide is the most common animal hide carry both leather and non-leather offer the non- used, links to the meat industry are undeniable. Accord- leather goods primarily for economic reasons. It is ing to the Leather Industries of America, the leather cheaper to manufacture non-leather goods, and as a industry’s trade association, very few animals are raised result they often cost less.
    [Show full text]
  • Complaint for Civil Penalties for Violation of Premerger Reporting Requirements of the Hart-Scott-Rodino Act
    IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF COLUMBIA ) UNITED STATES OF AMERICA, ) C/o Department of Justice ) Washington, D.C. 20530 ) CA3E NUHBER L:3~CVGOl Plaintiff ) ,-, ) " v. ) DECK TYFE: Civil Gene~al ) SARA LEE CORPORATION ) Three First National Plaza ) Chicago, Illinois 60602 ) Defendant. ) ----------------------------------------) COMPLAINT FOR CIVIL PENALTIES FOR VIOLATION OF PREMERGER REPORTING REQUIREMENTS OF THE HART-SCOTT-RODINO ACT The United States of America, Plaintiff, by its attorneys, acting under the direction of the Attorney General of the United States and at the request of the Federal Trade Commission, brings this civil action to obtain monetary relief in the form of a civil penalty against the Defendant named herein, and alleges as follows: JURISDICTION AND VENUE 1. This Complaint is filed and these proceedings are instituted under Section 7A of the Clayton Act, 15 U.S.C. § 18a, also known as Title II of the Hart-Scott-Rodino Antitrust Improvements Act of 1976 ("HSR Act" or "Act"), to recover a civil penalty for violation of the HSR Act. 2. This Court has jurisdiction over the defendant and over the subject matter of this action pursuant to Section 7A(g) of the Clayton Act, 15 U.S.C. § 18a(g), and 28 U.S.C. §§ 1331, 1337(a), 1345 and 1355. 3. Venue in this District is proper by virtue of 28 U.S.C. §§ 1391 and 1395, and by virtue of the Defendant's consent, in the Stipulation relating hereto, to the maintenance of this action and entry of the Final Judgment in this District. THE DEFENDANT 4.
    [Show full text]
  • Care and Maintenance
    Care and Maintenance Autex Interior Acoustic products are extremely durable and require little attention to maintain their good looks. Light vacuuming on a regular basis will prevent dust build up, and most marks can be cleaned with a mild detergent solution followed by rinsing and blotting. Stains should be dealt with according to the chart below. Before carrying out a proposed cleaning method, patch test on a concealed section to ensure it will not affect the adhesive or product. Avoid severe abrasion. Spot clean only. Vacuum to restore pile, but do not use a stiff brush. Autex Interior Acoustic products are designed with good health and hygiene in mind and can be disinfected to prevent germs and pathogens. Autex recommends disinfecting product surfaces using isopropanol (isopropyl alcohol) or ethanol diluted to 70 percent with water. Disinfectants containing quaternary ammonium compounds may also be effective. NB: Frontier™, Cascade™, Lattice™, and Horizon™ will need to be removed from the ceiling or wall to clean safely. Disassembly instructions can be found in individual product Install Instructions. We do not recommend using solvent-based solutions on Autex Acoustic products. Key Stain Treatment Guide A Mop up excess as soon as possible with a sponge Blood A C or cloth. Burn/Scorch Mark J Chewing Gum B C D H B Remove surplus with a knife edge or appropriate instrument. Chocolate B C D C Sponge with a solution of carpet shampoo working from Cooking Oils B C D well outside the stain in a circular motion towards the centre Crayon/Colour Markers B Cw D (this avoids spreading the stain).
    [Show full text]
  • Assessment of Cultural Heritage Significance & Executive Director Recommendation to the Heritage Council
    ASSESSMENT OF CULTURAL HERITAGE SIGNIFICANCE & EXECUTIVE DIRECTOR RECOMMENDATION TO THE HERITAGE COUNCIL PLACE NAME: Former Nugget Polish Company Building LOCATION: 16-20 Kanowna Street, Williamstown FILE: 12/008564 HERMES NUMBER: 192296 EXECUTIVE DIRECTOR RECOMMENDATION TO THE HERITAGE COUNCIL: • That the place or object NOT be included in the Heritage Register [Section 32 (1)(b)] TIM SMITH Executive Director Recommendation Date: 19 September 2014 Name: Former Nugget Polish Company Building, Williamstown Hermes Number: 192296 Page | 1 EXTENT OF NOMINATION The nomination received was for the two-storey former Nugget Factory Building (L-shaped along Kanowna Street) as well as the single storey extensions, Williamstown. Note: Nomination diagram not to scale BRIEF SUMMARY OF HISTORY AND DESCRIPTION History Summary The former Nugget Polish Company Building, Williamstown was originally built as a steam laundry in 1887-88 for Mrs Eliza Black to replace a similar facility she ran to launder linen for the Peninsular & Oriental Steam Navigation Company (P&O) ships which docked at Williamstown. Formerly located in timber buildings near Nelson Place in the early 1880s, the new steam laundry was constructed in Morris Street (later Kanowna Street) opposite the Melbourne railway line, and near the docks area. Designed by Footscray architect, Charles Polain, the substantial two storey brick building presented an ornate street facade to Morris Street. After Black’s death in 1888 the building was offered for sale and purchased by George Thompson in 1892. It continued to operate as a laundry for a short period before occupation by the Silex Soap Company in 1896- 97. After remaining unoccupied for some time, the building was leased to importers and manufacturers, the Standard Centrifugal Company before being again offered for sale in 1907.
    [Show full text]
  • Thermophysical Properties of Shoe Polish
    AU J.T. 15(2): 129-132 (Oct. 2011) Thermophysical Properties of Shoe Polish Manufactured from Pure Water Sachet Charles Ugbede Ameh Department of Chemical and Petrochemical Engineering Rivers State University of Science and Technology Nkpolu-Oroworukwo, Rivers State, Nigeria E-mail: <[email protected]; [email protected]> Abstract The thermophysical properties of shoe polish manufactured from wastewater sachet was investigated. Wastewater sachet was pyrolyzed at various temperatures to obtain wax yield. The other types of wax obtainable were discussed. A formulation is developed with the wax generated. Shoe polish is made from the paraffin wax obtained from the thermal decomposition of pure water sachet in a reactor. This recovery process helps in the disposing of what was hitherto a waste thereby reducing environmental pollution. The recovered product is tested for its thermophysical properties such as density, viscosity pour point and melting point. These properties were compared with a foreign manufactured shoe polish. The highest wax yield was obtained at a temperature of 160°C yielding 59.8g in 12 min. Keywords: Paraffin wax, pyrolysis, paraffin, reactor, environmental pollution. Due to surface tension forces, a glossy Introduction surface is created after polishing. This will dry to give the object the required luster. The Raw material is essential in any polish has to be resistant to corrosion, smooth, manufacturing industry. Pure water sachet is transparent, uniform in color, be adhesive, one of the most endemic pollutants in Nigeria. glossy and also thin. Most polishes depend on Why not convert waste to wealth? wax or oil for their polishing properties. Wax In the manufacture of shoe polish, wax is polishes are however more long lasting reacted with resins which provide the thin film (Okanlawon 2005).
    [Show full text]
  • Intellectual Property and Commerce Edition
    SUPPLEMENT TO ANTIGUA AND BARBUDA OFFICIAL GAZETTE OF THURSDAY 1ST JUNE, 2017 Vol. XXXVII — ISSUE NO. 42 INTELLECTUAL PROPERTY AND COMMERCE EDITION No. 42 THE ANTIGUA AND BARBUDA OFFICIAL GAZETTE - SUPPLEMENTARY June1st, 2017 SUPPLEMENTARY VOL: XXXVII Thursday 1st June, 2017 No. 42 ________________________________________________________________________ CONTENTS COMMERCIAL NOTICES Intellectual Property Trademarks 3-13 2 June 1st, 2017 THE ANTIGUA AND BARBUDA OFFICIAL GAZETTE - SUPPLEMENTARY No. 42 NOTICES ANTIGUA AND BARBUDA GAZETTE OF 01 INTERNATIONAL MARKS Industrial chemicals; coolants for vehicle engines; REGISTRATIONS antifreeze; plastic adhesives, other than for stationery or household purposes; oil cement Note: Any person within three months from the date (putty); blueprint paper; photographic paper; of appearance of this advertisement in the “Antigua photographic sensitizers; photographic dry plates; and Barbuda Official Gazette” may give notice in photographic developers; photographic fixing duplicate at the Trade Marks Office, Antigua, of solutions; unexposed photographic films; chemical opposition to registration of the said Trade Mark. preparations for use in photography; artificial sweeteners (chemical preparations); flour for 1274036 industrial purposes; starch for industrial purposes; unprocessed plastics (plastics in primary form). 151. Date of the registration 03.03.2015 02 Dyestuffs; pigments; paints; printing ink; anti-rust 180. Expected expiration date of the registration/renewal greases; nonferrous metals in foil
    [Show full text]
  • Sidney Nolan's Materials and Techniques
    Sidney Nolan’s Materials and Techniques: A case study of three Pebble monotypes Katie Wood*, Briony Pemberton and Sophie Lewincamp ABSTRACT As a prominent Australian artist, Sidney Nolan’s paintings are well researched and collected both internationally and within Australia. Less well known are his works on paper, in particular his monotypes, held in collections such as the National Gallery of Australia, the Art Gallery of New South Wales, the National Gallery of Victoria and Heide Museum of Modern Art. Three monotypes made by Nolan in the 1940s will be investigated to better understand the materials used and methods of application. Nolan is known for his use of unorthodox materials and these works were created during an era of intense experimentation. A technical art history methodology will be employed, involving primary and secondary source research and examination and analysis of the monotypes. This research has implications for both treatment and long-term preservation of Nolan paper collections. The research contained within this article was enabled by the long-term treatment collaboration between the Centre for Cultural Materials Conservation and Heide Museum and greatly informed by minor thesis research of one of the authors. Keywords Sidney Nolan, monotypes, materials and techniques, techinical art history, microscpy, lakedyes, madder INTRODUCTION MONOTYPES Sidney Nolan (1917–1992) is arguably Australia’s most A monotype is a print, yet unlike any other printmaking famous artist. His paintings challenge and influence the techniques it does not produce multiple identical images. way in which the landscape is viewed and interpreted, It involves painting onto a plain surface and transferring and his significance as an artist stems from his contribution the paint to another surface (Rasmusen 1960, pp.
    [Show full text]
  • The History of Sc Johnson in Great Britain
    THE HISTORY OF SC JOHNSON IN GREAT BRITAIN “Make something better than your competitors, tell everyone about it, and people will insist on buying it”. So said Samuel Curtis Johnson in 1886 when he founded his parquet flooring business in Racine, Wisconsin, USA. From these small beginnings has evolved an international corporation operating in nearly 70 countries with annual turnover in excess of $4.5 billion ake something better than sold and SC Johnson & Sons had a venture. Apart from having to your competitors, tell been launched as a manufacturer face considerable local competition, Meveryone about it, and and marketer of polishing and war in Europe had now broken people will insist on buying it”. So cleaning products. It has never out. Indeed, the first consignment said Samuel Curtis Johnson in 1886 looked back. Product ranges have of wax from Racine never reached when he founded his parquet been consistently extended and the shores of Britain - a German flooring business in Racine, acquisitions of complementary torpedo sent the vessel to the Wisconsin, USA. companies made. bottom of the Atlantic. Persistence and optimism fortunately prevailed. It is in the fulfilment of this belief In June 1914, as the great powers that the worldwide growth and of Europe headed towards war, The business prospered throughout success of the CS Johnson business Herbert Fisk Johnson, the son of the war years. By 1919 it had have since been built. outgrown the High From a very small Holborn premises parquet flooring and a search began business in a mid- NTERNATIONAL, to find a new home Western state has I for the Company.
    [Show full text]
  • 653006, 653046, 646318 Kiwi F&B NZ.Pdf
    The World’s No 1 Shoe Polish Kiwi ® Shoe Polish Kiwi Shoe nourishes and protects your favourite shoes. Benefits - Shines - Nourishes - Protects Kiwi ®Parade Gloss Prestige Black Kiwi Parade Gloss Prestige, premium shoe polish with carnauba wax. - Protects - Preserves - Nourishes all smooth leathers www.scj-professional.com www.scjohnson -professional.com Use Instructions: Precautionary Statement: HOW TO POLISH SHOES TO THE BEST SHINE Read warning and instructions on the product STEP 1 label. Apply polish with a cloth or polish applicator. Follow the care instructions for the item you STEP 2 intend to treat. Allow drying. If in any doubt, patch test KIWI® products in an STEP 3 inconspicuous area before treating the whole Buff to a gloss. item. STEP 4 Protect your clothing, carpets and furniture For an extra high shine, apply another light coat of polish, before using KIWI® products. sprinkle with water and buff with a soft cloth. STEP 5 FIRST AID: You should call The Poisons Information Centre For best results, weekly reapplication is recommended. if you feel you may have been poisoned, burned or irritated by this product. (Phone Australia 13 11 26; New STORAGE AND DISPOSAL Zealand 0800 764 766) or a doctor at once. If medical advice is needed, have product container at hand. Storage: Make sure that containers of this product are kept tightly closed. Keep containers dry and away from water. Kiwi® is a registered trademark of S.C.Johnson & Son Inc. Disposal: Dispose of small quantities and empty containers by USA all rights reserved. Authorised users S.C.Johnson & wrapping with paper and putting in garbage.
    [Show full text]