DLSR2 DSPBRIK™ L- SOFTWARE-DEFINED RADIO

Wideband ⋅ Reconfigurable ⋅ Scalable

♦ L-band analog input (950 MHz to 1750 MHz) ♦ 1800 MSPS 10 bit ADC (7.8 ENOB) ♦ Programmable attenuator (0 dB to 31.5 dB, 0.5 dB steps) ♦ Multiple digital downconverter (DDC) configurations provided: • 3180: Up to 3 DDCs with 80/40/20/10/5/2.5 MHz bandwidth selection • 8140g: Up to 8 DDCs with 40/20/10/5/2.5 MHz bandwidth selection • 8180: Up to 8 DDCs with 80/40/20/10/5/2.5 MHz bandwidth selection • 21400: Up to 2 DDCs with 400 MHz bandwidth • 11240: 1 DDC with 240 MHz bandwidth • 11320: 1 DDC with 320 MHz bandwidth • 11650: 1 DDC with 650 MHz bandwidth USING MULTI-RATE PROCESSING TECHNIQUES, the DLSR2 • 41160: Up to 4 DDCs with 160 MHz digitizes multiple L-band inputs and provides up to 8 independent bandwidth • All configurations allow independent tuning digitally downconverted signal channels, distributed over 10 Gigabit for each DDC Ethernet to individual clients or broadcast to multiple recipients. • Data output via 10GbE interfaces, except when using the 8140g configuration which BUILT UPON HIGH-PERFORMANCE FPGA TECHNOLOGY, the supports 1GbE DLSR2 supports seamless in-field firmware upgrades to meet the ♦ High-precision data time tags provided for DDC demands of evolving requirements, making it easy to deploy and and snapshot outputs maintain hundreds of units. • Tags generated using 1 PPS input • IRIG-B, NMEA-0183, or NTP time sources HIGH-PRECISION TIME TAGGING IS A SIGNATURE FEATURE of all • Accepts external 10 MHz reference Rincon Research data acquisition systems. The DLSR2 continues (optional) this tradition by producing time-tagged data with sub-1ns accuracies. ♦ Wideband (800 MHz) snapshot capability (up to 2 GB) Through careful compensation of all algorithmic delays, we are able ♦ Command and control via dedicated Ethernet to maintain this level of precision for all DDC output bandwidths. interface THE DLSR2’S UNIQUE WIDEBAND SNAPSHOT FEATURE provides ♦ Boot from local flash storage or network file continuous surveys of the entire digitized input signal (800 MHz system (NFS) wide) to support downlink evaluation and signal discovery and ♦ Automatic restoration of a saved configuration after reset, enabling seamless operation without identification, reducing overall system cost by eliminating the need user intervention for external test equipment or for sweeping a narrow-band receiver. ♦ Redundant, hot-swappable power supplies

ADDRESS ORDER TECH SUPPORT FAX | WEB 101 N. Wilmot Rd., Ste. 101 520.519.3131 520.519.3132 520.519.3120 Tucson, Arizona 85711 [email protected] [email protected] www.rincon.com

INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ PRODUCTS ARE SUBJECT TO THE RESTRICTIONS OF THE ARMS EXPORT CONTROL ACT▪ V 1.4

DLSR2 DSPBRIK™ L-BAND SOFTWARE-DEFINED RADIO

BLOCK DIAGRAM

SPECIFICATIONS

GENERAL DATA INPUT/OUTPUT ORDERING INFORMATION Power Connector NEMA5-15 Analog -27 dBm (nom), 50 ohm, AC DLSR2-1U-WSvwx-yz coupled, 950 MHz to 1750

Power 110/220 VAC 50/60 Hz, MHz, SMA connector v Number of analog inputs (1 to 4) 300 Watts (max) Clock/Reference 750 mVpp to 2 Vpp w Number of 10GbE outputs (2 to 8) Number of Inputs Up to 4 (1.5 dBm to 10 dBm) x Customization Code, optional (none, A, B, C, Number of Outputs Up to 8 50 ohm, AC Coupled, sine D, or request a new modification) or square , SMA no code = standard Command/Control 10/100/1000 Mbit connector A = Power detector and second attenuator on Ethernet, RJ45 each input 1PPS CMOS compatible, 50 ohm, B = Adds runtime-selectable S-band input Dimensions 1U 19” rackmount, SMA connector 26” depth filter, 2400 MSPS Time IRIG-B: 0.5 Vpp to 6 Vpp, C = 900 MHz input filter, 1200 MSPS Temperature 0° C to 50° C 50 ohm, 1 kHz AM, SMA D = Adds 10 port Ethernet switch, rear-panel Operating

NMEA-0813: RS-232 signal access level, LEMO connector, y 10GbE media (L, S, C, or 0) DB9 adapter supplied L = Long range fiber SFP+ modules, 1310 nm Data Connector 10 Gigabit Ethernet, SFP+ S = Short range fiber SFP+ modules, 850 nm modules (included), SR/LR C = direct-attach passive copper patch cables, fiber or direct attach copper Cisco, 3m 0 = no media included Digital Down SDDS or VITA-49, Converter Data various bandwidths z Boot mode (none or F) Format no code = NFS boot (flash write-protected) F = Flash booth (flash write-enabled) WB Snapshot Up to 2 GB (~1 sec) Example Configuration: DLSR2-1U-WS12 One L-band input with two 10GbE outputs Call for availability and custom configurations.

ADDRESS ORDER LINE TECH SUPPORT FAX | WEB 101 N. Wilmot Rd., Ste. 101 520.519.3131 520.519.3132 520.519.3120 Tucson, Arizona 85711 [email protected] [email protected] www.rincon.com

INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ PRODUCTS ARE SUBJECT TO THE RESTRICTIONS OF THE ARMS EXPORT CONTROL ACT▪ V 1.4