Curriculum Vitae

1- Personal Information Name: Mahmoud Mohamed Mohamed Nemat-Alla Title: Acting President of New Cairo Technological University and Dean of Faculty of Engineering, Kafrelsheikh University. Date of Birth: February 28, 1964 El-Dakahlya, Egypt. Home Address: Group 13 Building No.5 Apartment No. 54 Madinaty, New Cairo, Cairo, Egypt. Work Address: New New Cairo Technological University, 5th settlement, New Cairo, Cairo Egypt or Faculty of Engineering, Kafrelsheikh University, Kafrelsheikh, Egypt. E-mail: [email protected], [email protected] Contact phones: Mobile: (+2)01066006966 Home: +20-21016641 & 0473109533 Fax: +20 -47-3109533 Fax: +20 -47-3109529 2- Education: School Degree Date Major Mechanical Mansura B. Sc. Mech. Design and Production Eng., Faculty July Design & University, of Engineering, , Mansoura, 1987 Production Egypt Egypt. Engineering Mechanical Assiut M. Sc., Faculty of Engineering, , May Engineering University, Thesis Title: “Study of Residual Stresses in 1993 (Mechanical Egypt Viscoelastic Tubes” Design) Mechanical Ph.D., Faculty of Engineering, Shizuoka Engineering University, Japan. Dissertation Title: “Study of March (Design of Shizuoka edge crack problems in a semi-infinite FGM plate 1999 Advanced University, with bi-direction coefficient of thermal expansion Engineering Japan under thermal loading” Materials) 3- Citation and H-indices: SH-index according to Google Scholar can be obtained from the following link; http://scholar.google.com.eg/citations?hl=en&user=hx5TDtIAAAAJ 4- Career: No Position Authority Period Decision issued by Teaching and Assiut University, April 27, 1988- Assiut University 1 research assistant Egypt June 29, 1993 president Assiut University, June 30,1993- Assiut University 2 Assistant Lecturer Egypt January 11, 1995 president

1

Shizuoka University, January 11,1995- Ministry of H. 3 Research Assistant Japan March 27, 1999 education, Japan Assiut University, April 17,1999- Assiut University 4 Assistant Professor Egypt April 26, 2004 president Assiut University, April 27, 2004- Assiut University 5 Associate Professor Egypt October 24, 2009 president King Khaled August 31 , 2007- King Khaled 6 Associate Professor University, KSA August 31 , 2009 University president Professor of Machine Design and Assiut University, October 25, 2009 Assiut University 7 Production Egypt –July 31,2012 president Engineering Professor of Machine Design and Kafrelsheikh August 1, 2012 – Kafrelsheikh 8 Production University, Egypt Now University president Engineering Acting Dean of Kafrelsheikh 9- 9- 2012: 26-10 Kafrelsheikh 9 faculty of University, Egypt 2014 University president Engineering Dean of faculty of Kafrelsheikh 27-10 2014: 26-10 10 Presidential decision Engineering University, Egypt 2017 Acting Dean of Kafrelsheikh 27-10 2017: 6-3- Kafrelsheikh 10 faculty of University, Egypt 2018 University president Engineering Dean of faculty of Kafrelsheikh 7-3- 2018: 6-3- 11 Presidential decision Engineering University, Egypt 2021 Acting head of Faculty of Mechanical Engineering September 2012- Kafrelsheikh 12 Engineering Kafrelsheikh July 2013 University president Department University, Egypt Acting head of Faculty of Mechanical Engineering September 2012- Kafrelsheikh 13 Engineering Kafrelsheikh July 2013 University president Department University, Egypt Acting head of Faculty of Mechanical Engineering August 2013- July Kafrelsheikh 14 Engineering Kafrelsheikh 2014 University president Department University, Egypt Acting head of Faculty of Mechanical Engineering August 2013- July Kafrelsheikh 15 Engineering Kafrelsheikh 2014 University president Department University, Egypt Faculty of Chairman of research Engineering December 14, Kafrelsheikh 16 and engineering Kafrelsheikh 2012 till now University president consultancy center University, Egypt

2

Faculty of Chairman of Engineering October, 2015 till Kafrelsheikh mechatronic systems 17 Kafrelsheikh now University president engineering program University, Egypt New Cairo President of New New Cairo Technological September 3, 2019 18 Cairo Technological Technological University, Cairo, till now University University Egypt

5- Member ship of national, scientific or university committees No Committee Authority period Kafrelsheikh 1 Development of FUWA City March 2019 governorate National committee for higher education Ministry of 2 June 2018 mega projects higher education Secretary of professor and associate professor Ministry of September 2016 till 3 promoting committee No. 52 higher education now SCU, Ministry of 4 Member of Engineering sector bureau cycle of 2018-2021 higher education Member of planning committee of SCU, Ministry of 5 cycle of 2015-2008 Engineering sector higher education SCU, Ministry of 6 Member of Engineering sector bureau cycle of 2012-2015 higher education Reviewer for professor and associate Ministry of 7 cycle of 2012-2016 professor promoting committee No. 52 higher education Reviewer for professor and associate Ministry of 8 cycle of 2009-2012 professor promoting committee No. 52 higher education Kafrelsheikh September 2012, till 9 Kafrelsheikh university council university now Kafrelsheikh September 2012, till 10 Deans council university now Kafrelsheikh September 2012, till 11 Development committee university now Kafrelsheikh September 2012, till 12 Constructions committee university now Kafrelsheikh September 2012, till 13 Human resources committee university 2016 Kafrelsheikh September 2012, till 14 Higher committee for special committee university now September 2010 : 15 Faculty council Assiut university August 2011 16 Mechanical engineering department council Assiut university 2004: 2012 Consultancy council for Kafrelsheikh Kafrelsheikh 17 May 2017 till now governorate governorate

3

Kafrelsheikh August 2016, till 18 Promotion complaining committee University now

6- Evaluation and equivalization of engineering curriculums engineering sector committees No. Program University/Faculty Position Date MSc in Mechanical Arab Academy for Science Equivalization 1 and industrial Technology & Maritime October 2012 Member engineering Transport- Alexandria Arab Academy for Science MSc in Mechanical Equivalization 2 Technology & Maritime October 2012 engineering Member Transport- Cairo BSc in Arab Academy for Science Equivalization 3 Mechatronic Technology & Maritime June 2013 Member engineering Transport- Cairo MSc in Mechanical Arab Academy for Science Equivalization 4 and industrial Technology & Maritime May 2013 Member engineering Transport- Cairo Arab Academy for Science MSc in Mechanical Equivalization 5 Technology & Maritime December2013 engineering Member Transport- Cairo BSc in Mechanical Equivalization 6 American university in Cairo December2013 engineering Member Committee 7 BSc bylaw MAS December2013 chair BSc in industrial Committee 8 Nile university December2013 engineering chair Arab Academy for Science BSc in Mechanical Equivalization 9 Technology & Maritime February 2014 engineering Member Transport- Alexandria Higher studies Equivalization 10 December2014 bylaw Member Higher studies Equivalization 11 El-Faiuom university February 2015 bylaw Member Mechatronics Committee 12 May 20153 program chair Product Equivalization 13 February 2015 development MSc Member Equivalization 14 BSc bylaw BUC February 2015 Member Alexandria high institute for Committee 15 BSc bylaw February 2015 engineering and technology chair Toward better graduate for SCU, Engineering sector November 16 Member engineering committee 2015 education

4

SAT students complain November 17 SCU Member investigation 2015 committee Starting BSC in Committee 18 Minufia university January 2016 mechatronic chai 19 BSc bylaw Egyptian-Chinese university Member January 2016 Founding Faculty of engineering 20 member January 2016 Damietta university Alexandria high institute for 21 BSc bylaw Committee chair January 2016 engineering and technology MSc in industrial 22 MUST Committee chair May 2017 engineering Arab Academy for BSc in Mechanical Science Technology Equivalization 23 May 2017 engineering & Maritime Transport- Member Alexandria September 24 BSc bylaw Damietta university member 2017 Mechanical power September 25 and mechatronic Nile university Committee chair 2017 engineering BSc in industrial November 26 Committee chair engineering 2017 BSc in November 27 Future university Committee chair Mechatronic 2017 Arab Academy for MSc in Mechanical Science Technology 28 Committee chair March 2018 engineering & Maritime Transport- Cairo 29 BSc bylaw MSA Committee chair March 2018 30 BSc bylaw Nile university member July 2018 31 BSc bylaw Ain shams university member July 2018 Modifications of Egyptian-Chinese 32 Member July 2018 BSc bylaw university December 33 BSc bylaw MUST Member 2018 December 34 BSc bylaw Future university Committee chair 2018 Arab Academy for MSc in Mechanical Science Technology December 35 Committee chair engineering & Maritime Transport- 2018 Alexandria

5

7- Scholarships and Prizes

1. Ministry of higher education Scholarship for excellent student 1982-1987. 2. Munbusho (Japanese ministry of education, culture and scientific research) Research Student Scholarship, from January 1995 to April 1996. 3. Munbusho (Japanese ministry of education, culture and scientific research) PhD Scholarship, from April 1996 to April 1999. 4. Five prizes of publishing research papers from Assiut University. 5. One prize of publishing research papers from Kafrelsheikh University

8- Development and construction works at Kafrelsheikh university and Faculty of Engineering

No Work Place Date Constructing and starting Computer Faculty of 1 2013-2014 engineering and systems program Engineering Constructing and starting Mechatronic Faculty of 2 2015-2016 systems engineering program Engineering Faculty of 3 Higher studies bylaw 2015-2016 Engineering Constructing and starting electronic and Faculty of 4 2016-2017 communications program Engineering Constructing 3 lecture halls of capacity Faculty of 5 2013: 2017 200 students Engineering Constructing 3 lecture halls of capacity Faculty of 6 2014, 2017 140 students Engineering Constructing 2 lecture halls of capacity Faculty of 7 2016 100 students Engineering Constructing a lecture hall of capacity Faculty of 8 2018 800 students Engineering Development of 7th floor for Faculty of 9 2015: now mechatronic program Engineering Faculty of engineering development to Faculty of 10 2013: now beer the exceeds number of students Engineering Increasing number of staffs more than Faculty of 11 2013: now three times Engineering Faculty of 2014: 12 Improvement of exams control system Engineering 20187 13 About to finish workshop and labs Faculty of 2015- 2019 buildings Engineering 14 Increase the productivity of workshop Faculty of 2015- till Engineering now 15 Applying Maintenance to faculty Faculty of 2013- furniture Engineering 2015 16 Design of 8th elevators University 2013 hospital 17 Design and supervising of constructing Faculty of 2014 of two elevators education

6

18 Supervising of constructing of two Faculty of 2014 -2015 elevators specific education 19 Supervising of constructing of three Faculty of 2014 -2015 elevators medicine 20 Design and supervising of constructing Faculty of 2014 -2015 of two elevators nursing 21 Design and supervising of constructing Faculty of 2014 -2015 of two elevators aqua culture and fishing 22 Design and supervising of constructing Faculty of 2016 of two elevators computer science 23 Design of two elevators Faculty of 2015 pharmacy, 24 Reconstructing BSc and higher studies Assiut 1999 -2012 bylaw university 25 Design of 8th elevators for MASNA Kafrelsheikh 2016- 2017 towers governorate 26 Design of elevators for Nile towers, Kafrelsheikh 2016- 2017 Disoook governorate 27 Design of elevators for International Kafrelsheikh 2016- 2017 school governorate 28 Mechatronic workshop Faculty of 2018 Engineering 29 Robotic Lab Faculty of 2019 Engineering 30 3D printing lab Faculty of 2019 Engineering 31 Buying 86 new computers for computer Faculty of 2019 labs Engineering 32 Buying 61 new two work stations Faculty of 2019 computers Engineering 33 Covering all labs, halls and spaces with Faculty of 2019 WIFI Engineering

9- Research Projects (1) Design and production of robot for pharmacy jobs, funded from academy of science by 75 000 LE, 2019 (2) Design and production of 3D metalic printer, funded from academy of science by 75 000 LE, 2018 (3) Project for educational qualification to prepper faculty of Engineering for accreditation, Ministry of Higher education 2018-2020 (4) Solid waste management master planning for Dakahlia Governorate, Egypt, 2017-2018 (5) Solid waste management master planning for Behira Governorate, Egypt, 2017-2018

7

(6) Revision of the new standard and specifications for the Egyptian authority for standardization and quality with Assiut university, 2005- 2006 (7) Design and production of multiple drilling machine that used in production of ceramic dishes, Marmo Trade Company, 6 October City, Egypt, 2005. (8) Design and production of SiC slaps Marmo Trade Company, 6 October City, Egypt, 2004. (9) Functionally Graded Materials Design, Shizuoka University, Japan 1998. (10) Nano graphite/ cupper functionally graded journal bearing materials, King Khaled University, KSA, Accepted but I withdraw it due to returning back to Egypt, 2009.

10- Teaching Courses A. Undergrad Level 1. Strength of materials and their testing. 2. Materials engineering and testing. 3. Machine drawing and construction of machine elements. 4. Machine design. 5. Statistical quality control 6. Engineering materials and their applications. 7. Engineering drawing. 8. Modeling and simulation of mechanical systems. 9. System dynamics 10. Mechanical systems design 11. Theory of elasticity B. Grade Level 1. Advanced engineering materials 2. Mechanical behavior of engineering materials 3. Thermal stresses

11- B. Sc. Graduation Projects Supervision 1. Design of new water saver for domestic use, Assiut University, Mech. Engg. Dept, (1999-2000). 2. Design and manufacturing of an electromagnetic load handling attachment and model of an overhead crane, Assiut University, Mech. Engg. Dept, (2000-2001) 3. Design and manufacturing of a centrifugal casting unit for the production of high-quality gears, Assiut University, Mech. Engg. Dept, (2001-2002) 4. Computer aided design and manufacturing for drawing box-shaped products from sheet metals, Assiut University, Mech. Engg. Dept, (2002-2003) 5. Design of thermal barrier materials, Assiut University, Mech. Engg. Dept, (2003-2004) 6. Design and production of SiC slabs, Assiut University, Mech. Engg. Dept, (2004-2005) 7. Design and production of electric furnace for melting and ceramic centering, Assiut University, Mech. Eng. Dept, (2005-2006) 8. Design and manufacturing of vertical centrifugal casting unit, Assiut University, Mech. Engg. Dept, (2005-2006) 9. Development of quality control system in Coca-Cola factory- Assiut branch, Labor university, Assiut branch, (2005-2006). 10. Study and control of quality control system in beverage factories- Applied to Assiut Coca-Cola factories, Labor university, Assiut branch, (2006-2007).

8

11. Design and production of drawing dies for deep drawing of triangular shapes, Mech. Engg. Dept, King Khaled University, KSA, (2007-2008). 12. Design and manufacturing of pizza vending machine, Mech. Eng. Dept, Faculty of Engineering, Kafrelsheikh University, Egypt, (2012-2013). 13. Design and manufacturing plastic injection molding machine, Mech. Eng. Dept, Faculty of Engineering, Kafrelsheikh University, Egypt, (2012-2013). 14. Design and manufacturing CNC plasma cutting machine, Mech. Eng. Dept, Faculty of Engineering, Kafrelsheikh University, Egypt, (2013-2014). 15. Design and manufacturing metallic 3D printer, Mech. Eng. Dept, Faculty of Engineering, Kafrelsheikh University, Egypt, (2017-2018). 16. Design and manufacturing robot for pharmacy jobs, Mech. Eng. Dept, Faculty of Engineering, Kafrelsheikh University, Egypt, (2018-2019).

11- M. Sc. And Ph D supervising

Not conferred yet degrees Student No Degree/university Date Title name Investigation of Aluminum/ PhD, Kafrelsheikh March Mahmoud M 1 SiC manufactured by 3D university 2019 Tawfiq printing MSc, Kafrelsheikh January Optimum design for parallel Hosam 2 university 2019 robot Elweheshy PhD, Shobra/ Benha March Ahmed Abo 3 Improvement of 3d printing university 2019 Elfadl Simulation of manufacturing MSc, Kafrelsheikh February Kareem 4 process for nanocompound university 2018 Ahmed used in bone replacement

Conferred degrees Student No Degree/university Date Title name Design and investigation of PhD, Assiut May Mootaz Bellah 1 aluminum cell anode using university 2012 Hassan FGM PhD, Assiut July Fatigue behavior of SBR and Abdalla M 2 university 2014 NBR rubber compounds Kaed MSc, Assiut July Investigation of behavior of Abdelrasool M 3 university 2004 Herringbone journal bearing Gad MSc, Assiut May FE analysis of electromagnetic Ali Abd 4 university 2012 plugging Elhafeez MSc, Assiut June Study of fuel cell manufactured Mohamed Eid 5 university 2016 from FGM poles Abdelmawla MSc, Shobra/ Benha March Development of Aluminum/ Maged M 6 university 2017 Sci composite using FSW Elhefnawy

9

Microstructure and Dynamic MSc, Shobra/ Benha May Mahmoud M 7 Characteristic of Aluminum/ university 2017 Tawfiq graphite composites MSc, Shobra/ Benha May Vertical compensation for Taher Atia 8 university 2017 Aluminum in FSW Shehabeldeen

12- Areas of Interest ▪ Two Dimensional Functionally Graded Materials ▪ Functionally Graded Materials ▪ Advance materials ▪ Thermal Stresses ▪ Fracture Mechanics ▪ Singular Integral Equations ▪ Viscoelasticity ▪ Testing and Evaluations of Tubular materials ▪ Tube Forming ▪ Centrifugal Casting ▪ Refractory materials ▪ Static and dynamic performance of journal bearings ▪ Residual stresses

13- Publications A- International Journals. (1) M. Elhefnawey, G.L. Shuai, Z. Li, M. Nemat-Alla, D.T. Zhang, L. Li, On achieving April ,174 ز.superior strength for Al-Mg-Zn alloy adopting cold ECAP, Vacuum, Vo 2020, 109191, https://doi.org/10.1016/j.vacuum.2020.109191. (2) M Saied, K Ahmed, M Ahmed, M. Nemat-Alla, M El-Sebaie, Performance study of solid oxide fuel cell with various flow field designs: numerical study, International Journal of Hydrogen Energy, 45, pp.20931-20946, 2018. (3) M Saied, K Ahmed, M Ahmed, M. Nemat-Alla, M El-Sebaie, Investigations of solid oxide fuel cells with functionally graded electrodes for high performance and safe thermal stress, International Journal of Hydrogen Energy, Vol. 42, No.24, pp.15887-15902, 2017. (4) Mahmoud M. Nemat-Alla and Mohamed G. El-Sebaie Mohamed E. Saied, Khaled I. Ahmed, Mahmoud A. Ahmed. Numerical Study of Solid Oxide Fuel Cell Performance with Helical and Serpentine Flow Field Designs, INTERNATIONAL JOURNAL OF CONTROL, AUTOMATION AND SYSTEMS,2015, 4 (3), 27-33> (5) Ali M. Abdelhafeez, M. Nemat-Alla, M G El-Sebaie, FEA of electromagnetic forming using a new coupling algorithm: Effects of strain hardening properties and Anisotropy, International Journal of Scientific &Engineering Research, Vol. 5, No.12, pp. 1069-1075, 2014. (6) Abouel-Kasem, A., Hassab-Allah, I.M, M. Nemat-Alla “Viscoelastic analysis of adhesively bonded tubular joints” Journal of Engineering and Applied Sciences, Majmaah University, Vol. 1, pp. 13- 23, 2014.

10

(7) Abdullah Mohammed, Mahmoud M Nemat-Alla, Karam M Emara, Effect of frequency on fatique life of SBR and NBR compounds, International Journal of Scientific and Engineering Research, Vol 5, No.1, pp., 865-870, 2014, (8) Ali M. Abdelhafeez, M. Nemat-Alla, M G El-Sebaie, FEA of electromagnetic forming using a new coupling algorithm, International Journal of Applied Electromagnetics and Mechanics, Vol. 42, No. 2, pp. 157-169, 2013. (9) Ali M. Abdelhafeez, M. Nemat-Alla, M G El-Sebaie, Finite Element Analysis of Electromagnetic Bulging of sheet metals, International Journal of Scientific & Engineering research, Vol. 3, No. 2, 2012. (10) Mahmoud M. Nemat-Alla, Moataz H. Ata, Mohamed R. Bayoumi, Wael Khair-Eldeen" Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material", Materials Sciences and Applications, Vol. 2, pp.1708- 1718, 2011. (11) M. Nemat-Alla, Ahmed, K. and Hassab-Allah, I. "Elastic-plastic analysis of two dimensional functionally graded materials under thermal loading" International Journal of Solids and Structures, Vol. 46, No. 14-15, pp. 2774-2786, doi:10.1016/j.ijsolstr.2009.03.008, 2009. (12) Mahmoud Nemat-Alla “Reduction of thermal stresses by composition optimization of two -dimensional functionally graded materials" Acta Mechanica, doi: 0.1007/s00707- 008-0136-1, 2009. (13) M. Nemat-Alla Gad, A. M., Nasr, A. M. and Khalil, A. A. “Static and dynamic characteristics of oil-lubricated beveled-step herringbone-grooved journal bearings, ASME Journal of Tribology, Vol. 131, No. 1, 011701, doi:10.1115/1.2908903, 2009. (14) Mahmoud Nemat-Alla “On eccentric tube nosing" ASME Journal of Manufacturing Science and Engineering, Vol. 130. No.1, 011006, doi:10.1115/1.2783273, 2008. (15) Gad, A., M. Nemat-Alla, Nasr, A. M. and Khalil, A. A. “On the optimum groove geometry for herringbone grooved journal bearings” ASME journal of Tribology, Vol. 128, pp. 586-593, doi:10.1115/1.21975, 2006. (16) H.S. Hedia and Nemat-Alla, Mahmoud “Design optimization of functionally graded dental implant” Bio-Medical Materials and Engineering, Vol.142/2, pp 133-143, 2004. (17) M. Nemat-Alla “Reduction of thermal stresses by developing two-dimensional functionally graded materials” Int. J. of Solids and Structures, Vol.40/26, pp 7339-7356, doi:10.1016/j.ijsolstr.2003.08.017, 2003. (18) M. Nemat-Alla “Reproducing hoop stress-strain behavior for tubular material using lateral compression test” Int. J. of Mech. Science, Vol.45, No. 4, pp 605-621, doi:10.1016/S0020-7403(03)00115-2, 2003. (19) M. Nemat-Alla and NODA, N. “Edge crack problem in a semi-infinite FGM plate with bi-directional coefficient of thermal expansion under two-dimensional thermal loading” Acta mechanica. Vol.144, No. 3-4, pp. 211- 230, doi: 10.1007/BF01170176, 2000. (20) M. Nemat-Alla and NODA, N. “Study of an edge crack problem in a semi- infinite functionally graded medium with two dimensionally non-homogeneous coefficient of thermal expansion under thermal load”. J. Thermal Stresses, Vol.19, pp. 863- 888, 1996. (21) M. Nemat-Alla and NODA, N. “Thermal stress intensity factor for functionally gradient half space with an edge crack under thermal Load” Archive of Applied Mechanics, Vol. 66, pp. 569-580, doi: 10.1007/BF00808145, 1996.

11

B- National Journals (1) M. Elhefnawey, T.S. Mahmoud, M. M. Nemat-Alla, E.Y. El-Kadya. " Effect of Process Parameters on Microstructure of Friction Stirred 6061 Aluminum Alloy with Addition of SiC, Engineering Research Journal, Faculty of Engineering at Shoubra, to be published 2017 (2) M.M. Tawfikb, T.S. Mahmoud, M. M. Nemat-Alla, E.Y. El-Kadya. " Effect of Friction Stir Processing Parameters on Microstructure And Wear Behavior of AA6061/Gr Surface Composites, Engineering Research Journal, Faculty of Engineering at Shoubra Vol. 32 , April 2017 (3) T. Shehabeldeen, T.S. Mahmoud, M. M. Nemat-Alla, E.Y. El-Kadya. " Enhancement of The Microstructural and Mechanical Characteristics of AA6061 Aluminum Joints Using Vertical Compensation Friction Stir Welding, Engineering Research Journal, Faculty of Engineering at Shoubra Vol. 32, April 2017 (4) Abdullah Mohammed, Mahmoud M. Nemat-Alla, and Karam M. Emara, Effect of frequency on fatigue lifetime of sbr and nbr compounds, Journal of Engineering Sciences, Vol. 41, No. 4, pp.501- 516, 2013. (5) Abdullah Mohammed, Karam M. Emara and Mahmoud M. Nemat-Alla, Design of rubber fatigue behaviour test rig, Journal of Engineering Sciences, Vol. 41, No. 2, pp.501- 516,, 2013. (6) El-Kady, E. Y., Mahmoud, T.S., M. Nemat-Alla, and Hassab-Allah, I. M. "Investigations of FSW welding parameters in the stirred zone for A356 Al cast alloy, Journal of Engineering Sciences, Vol. 37, No. 1, pp. 101-116, 2009. (7) Mahmoud Nemat-Alla “Composition optimization of two dimensional functionally graded materials under thermal loading " Journal of Engineering Sciences Journal of Engineering Sciences, Vol. 36, No. 4, pp. 1461-1482, Assiut University, Egypt, 2008. (8) M. Nemat-Alla, Ahmed, K, Hassab-Allah, I. " Elastic-plastic investigation on effectiveness of two dimensional functionally graded materials in reduction of thermal Stresses " Journal of Engineering Sciences, Vol. 35, No. 3, pp. 689-710, Assiut University, Egypt, 2008. (9) Abouel-Kasem, A., Hassab-Allah, I.M, M. Nemat-Alla “Viscoelastic analysis of adhesively bonded tubular joints” Journal of Engineering Sciences, Assiut University, Vol. 33/3, pp. 135- 156, May 2005. (10) Hassab-Allah, I. M., M. Nemat-Alla, and Saleh, M. A. E. “Determination of hoop tensile properties of tubular materials using ring tension test” Journal of Engineering Sciences, Assiut University, Vol. 32/1, pp. 235- 256, January 2004. (11) Mahmoud Nemat-Alla “On obtaining stress-strain curves using tube lateral compression” JOURNAL of Engineering Sciences, Assiut University, Vol. 30, No. 4, pp. 911- 926, 2002. (12) HASSAB-ALLAH, I. and M. Nemat-Alla” J. of Engg. and Appl. Science, Vol. 49, No.3, pp. 529-546, Faculty of Engineering, , 2002. (13) M. Nemat-Alla, NODA, N. and HASSAB-ALLAH, I.,” Analysis and investigation of thermal stress intensity factor for edge cracked FGM plates” Bulletin of the Faculty of Engineering, Assiut university, Vol. 29, No.3, pp. 89-102, 2001. (14) M. Nemat-Alla, Farouk M.F. Badran and Emara, K. M., “Analysis of residual stresses in bars and tubes” Bulletin of the Faculty of Engineering, Assiut University, Vol. 20, pp. 56-66, 1992.

12

C- International Conferences (1) Taher A. Shehabeldeen, T. S. Mahmoud, Mahmoud Nemat-Alla, E.Y. El-Kady, Yajun Yin, Xiaoyuan Ji, Xu Shen and Jianxin Zhou “Improvement of Microstructural and Mechanical Characteristics of Friction Stir Welded AA6061 Aluminium Alloy Joint” ICMAE 2019: Materials Science and Engineering 751 (2020) 012088 IOP Publishing doi:10.1088/1757-899X/751/1/012088 (2) M.H. Ata, M.M.Nemat-Alla , M.R. Bayoumi and W . Khair-Eldeen "Fabrication and Microstructural Investigations of Aluminum/Steel functionally Graded Electric Transition Joint Fabricated by Powder Metallurgy" Proceedings of the Fifth Assiut University International Conference on Mechanical Engineering Advanced Technology for industrial Production, Assiut University, Assiut, Egypt, March 29-31 (2011). (3) M.H. Ata, M. M. Nemat-Alla, M.R. Bayoumi and W. Khair-Eldeen "Microstructure and Microhardness Investigations of Aluminum/Steel Functionally Graded Electric Transition Joint Fabricated by Powder Metallurgy" Proceedings of the Fifth Assiut University International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut, Egypt, March 29-31 (2011). (4) Mahmoud Nemat-Alla and Khaled Ahmed "3-D elastic-plastic finite element analysis of two dimensional functionally graded materials under cyclic thermal loading" 7th Int. Conference on Thermal Stresses, Thermal stresses 2007, Vol. 2, pp. 495- 498, Taipei, Taiwan, Jun 4-7, 2007. (5) Mahmoud Nemat-Alla “Theoretical and experimental investigation for eccentric nosing process of circular metal tubes" 4th Assiut University Int. Conf. On Mech. Eng. Advanced Tech. For Indus., MEATIP4, pp 414-426, December 12-14, 2006. (6) Abouel-Kasem, A., Hassab-Allah, I.M and M. Nemat-Alla “Analysis and design of viscoelastic adhesively bonded tubular joints” 4th Assiut University Int. Conf. On Mech. Eng. Advanced Tech. For Indus., MEATIP4, pp 40-52, December 12-14, 2006. (7) A. M. Gad, M. Nemat-Alla, A. M. Nasr, A. A. Khalil, “Beveled-Step herringbone grooved journal bearings" 7th International conference on Production engineering and Design for Development, PEDD7, February7-9, Cairo, Egypt, 2006. (8) A. M. Gad, M. Nemat-Alla, A. M. Nasr,A. A. Khalil, “Static characteristics of oil- lubricated beveled-step herringbone- grooved journal bearings” Proceedings of IMEC2004 International Mechanical Engineering Conference, December 5-8, Kuwait, 2004. (9) A. M. Gad, M. Nemat-Alla, A. M. Nasr, A. A. Khalil, “Dynamic characteristics of oil- lubricated beveled-step herringbone- grooved journal bearings” Proceedings of IMEC2004 International Mechanical Engineering Conference, December 5-8, Kuwait, 2004. (10) Hedia, H, S. and M. Nemat-Alla “Design Optimization of Functionally Graded Dental Implant” 8th International conference on mechanical design and production engineering, Cairo University, Vol. II, pp 833-844, January 4-6, 2004. (11) M. Nemat-Alla Hassab-Allah, I.M. and Emara, K.” Design of two dimensional functionally graded materials’ 8th International conference on mechanical design and production engineering, Cairo University, Vol. II, pp 845-857, January 4-6, 2004. (12) Mahmoud Nemat-Alla “Inverse analysis for identification of stress-strain curve using tube lateral compression” 3rd Assiut University Int. Conf. On Mech. Eng. Advanced Tech. For Indus., MEATIP3, Vol. 1, pp.116-126, December 24-26, 2002.

13

(13) Mahmoud Nemat-Alla “Volume fraction, rule of mixture and thermal stresses for 2-D functionally graded material” 3rd Assiut University Int. Conf. On Mech. Eng. Advanced Tech. For Indus., MEATIP3, Vol. 1, pp.133-146, December 24-26, 2002. (14) M. Nemat-Alla and NODA, N. and HASSAB-ALLAH, I.” Thermal stress intensity factor for edge cracked FGM plate with bi-directional coefficient of thermal expansion” 4th Int. Conference on Thermal Stresses, Thermal stresses 2001, pp. 201-204, Osaka, Japan, Jun 8-11, 2001. (15) HASSAB-ALLAH, I. and M. Nemat-Alla” Edge and internal cracked FGM plate under thermal loading” Thermal stresses 2001, pp. 205-208, Osaka, Japan, Jun 8-1, 2001. (16) M. Nemat-Alla and NODA, N. “Analysis of thermal stresses and thermal stress intensity factor for edge cracked functionally graded plate under thermal loading” CAMS-Spring 200 Second International spring school on current activities of material science, Assiut, Egypt, Vol. I, PP 67-85, April 22-26, 2000. (17) M. Nemat-Alla and NODA, N. “Edge crack problem in a semi-infinite FGM plate with bi-directional coefficient of thermal expansion under two dimensional thermal loading” 3rd Inter. Conference on Material Engineering for Resources (ICMR’98) pp 169-170, Akita, Japan 1999. (18) M. Nemat-Alla and NODA, N. "Thermal stress intensity factor for edge cracked functionally graded strip with a two dimensionally coefficient of thermal expansion” Thermal Stress”97, pp. 315 – 318, New York, USA 1997. (19) M. Nemat-Alla and NODA, N. “Study of an edge crack problem in a semi- infinite functionally graded medium with two dimensionally non-homogeneous coefficient of thermal expansion under thermal load” 19th Inter. Congress of Theoretical and applied mechanics (ICTAM”96), Kyoto, Japan pp. 252, 1996. (20) Farouk M.F. Badran, Emara, K. M. and M. Nemat-Alla, “Determination of residual stresses in viscoelastic tubes. Part I Theoretical analysis” PEDAC’92, 5th Inter. conference developments in Production Engineering, Design & Control, Alexandria University, Egypt, pp.99-108, 1992. (21) Farouk M.F. Badran, Emara, K. M. and M. Nemat-Alla, “Determination of residual stresses in viscoelastic tubes. Part-II- Experimental Work” PEDAC’92, 5th Inter. conference developments in Production Engineering, Design & Control, Alexandria University, Egypt, pp.109-120, 1992.

14- Published Books (1) Mahmoud NEMAT-ALLA, Materials testing and engineering, Kafrelsheikh University, 2013 (2) Mahmoud NEMAT-ALLA, Solved problems in materials testing and engineering, Kafrelsheikh University, 2013 (3) Mahmoud NEMAT-ALLA, Engineering drawing Part I, Kafrelsheikh University, 2013 (4) Mahmoud NEMAT-ALLA, Engineering drawing Part II, Kafrelsheikh University, 2013 (5) Mahmoud NEMAT-ALLA, Problems in Engineering drawing Part I, Kafrelsheikh University, 2013 (6) Mahmoud NEMAT-ALLA, Problems in Engineering drawing Part II, Kafrelsheikh University, 2013 (7) Mahmoud NEMAT-ALLA, Exercises and work sheets in engineering drawing Part I, Kafrelsheikh University, 2013

14

(8) Mahmoud NEMAT-ALLA, Exercises and work sheets in engineering drawing Part II, Kafrelsheikh University, 2013 (9) HASSAB-ALLAH, I. and NEMAT-ALLA, M. and MANSOUR, M. H. “Materials Science” King Khaled University, KSA, (2008). (10) HASSAB-ALLAH, I. and NEMAT-ALLA, M. and MANSOUR, M. H. “Materials Science Laboratory” King Khaled University, KSA, (2008). (11) El-Kady, E., Nemat-Alla, M., et al, Engineering drawing I, Modern Arabia, KSA, 2008. (12) HASSAB-ALLAH, I. and NEMAT-ALLA, M. “Lectures in Engineering Materials” Assiut University press (2006). (13) HASSAB-ALLAH, I. and NEMAT-ALLA, M. “Solved problems in Engineering Materials” Assiut University press (2006). (14) Nasr, A., Khalil, A., HASSAB-ALLAH, I. and NEMAT-ALLA, M. “Training sheets and problems in Engineering Drawing” Assiut University press (2006). (15) Nasr, A., Khalil, A., HASSAB-ALLAH, I. and NEMAT-ALLA, M. “Principles of Engineering Drawing” Assiut University press (IN ARABIC) (2006).

15- Curriculum Preparations 1- Curriculum of Mechanical Engineering Department, Assiut University, 2004. 2- The proposed parallel education curriculum, for manufacturing Engineering and Management, Assiut University 2002. 3- The proposed Faculty of Technology curriculum for Science and Technology, program of Materials and their Application, Institute of Sugar Industry, Assiut University, 2005 4- Computer Engineering and systems Curriculum, Faculty of Engineering Kafrelsheikh University, 2014 5- Higher Study Curriculum, Faculty of Engineering Kafrelsheikh University, 2015 6- Mechatronics Systems Engineering Curriculum, Faculty of Engineering Kafrelsheikh University, 2015 7- Electronics and communication Engineering and systems Curriculum, Faculty of Engineering Kafrelsheikh University, 2016

16- Conferences Steering Committee Membership (1) MEATIP1, 1st Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, December 249-26, (1994), Assiut University, Assiut, Egypt. (2) Thermal stresses 95 "Thermal stresses” 24-26 May 1995, Hamamatsu, Japan (3) MEATIP5, 5th Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, March 29-31, (2011), Assiut University, Assiut, Egypt. (4) MEATIP4, 4rd Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, December 12-14, (2006), Assiut University, Assiut, Egypt. (5) ICCES1, 1st International conference of Civil Engineering Sciences, October 7-8 (2003), Assiut University, Assiut, Egypt. (6) INES2003, IEEE 7th International Conference on Intelligent Engineering Systems, Assiut-Luxor, Egypt, March 4-6, (2003), Assiut University, Assiut, Egypt.

15

(7) MEATIP3, 3rd Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, December 24-26, (2002), Assiut University, Assiut, Egypt. 17- International Journals Reviewer (1) Acta Mechanica, 2000. (2) International Journal of Materials and Product Technology (IJMPT), 2004. (3) International Journal of Solids and Structures (IJSS), 2004. (4) Heat Transfer Engineering, 2009. (5) Composites part B, 2011. (6) Energy and fuels, 2011. (7) Measurement, 2011. (8) International Journal of Solids and Structures (IJSS), 2011. (9) Journal of Mechanical Engineering Research 2012 (10) International Journal of Solids and Structures (IJSS), 2014. (11) Journal of quality in maintenance Engineering (12) Jazan University journal 2013 (13) Journal of Medicine and Medical Sciences Research 2013 (14) International Research Journal of Engineering Science, Technology and Innovation 2012 (15) Journal of Mechanical Engineering Research, 2013 (16) Journal of King Saud University: Engineering Sciences, 2013 (17) Vacuum, 2019,2020

18- Conferences and local journals Reviewer

(1) MEATIP5, 5th Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, March 29-31, (2011), Assiut University, Assiut, Egypt. (2) MEATIP4, 4rd Assiut University International Conference on Mechanical Engineering Advanced Technology for Industries, December 12-14, (2006), Assiut University, Assiut, Egypt. (3) Engineering between theory and application, Youth researchers 1st engineering conference, May 7-8, (2007), Faculty of Engineering, Assiut University, Assiut, Egypt. (4) Journal of Engineering sciences, Assiut University, 2002-2013. (5) Mansoura environmental journal, Mansoura University 2012-2013

19- General Lectures and Presentations (1) M. Nemat-Alla " On Copper-Graphite Functionally Graded Materials Applied to Journal Bearings" Egypt-Japan Joint workshop on Advances in Engineering Sciences and Technologies, Egypt,15-16 February 2010. (2) M. Nemat-Alla “Functionally graded Materials and Their Applications” Academy of Science Research and Technology, Cairo, Egypt, January 31, (2005). (3) M. Nemat-Alla and NODA, N. “Analysis of thermal stresses and thermal stress intensity factor for edge cracked functionally graded plate under thermal loading” CAMS-Spring 200 Second International spring school on current activities of material science, Assiut, Egypt, April 22-26, (2000).

16

20- Professors and associate professors’ promotion committee’s reviewer 1- Manufacturing and mechanical design committee 2- Mechanical power and thermal engineering committee 3- Military technical college committee 4- Metalogical research center committee

21- Consultations and Field Experiences (1) Study of the environmental impact of two hotels equipment’s and units on the surrounding area, Sharm Elskeikh, Egypt 2013 and 2014. (2) Investigations and testing of more than 50 boilers for different hotels in Sharm Elskeikh, Dahab and Taba, Egypt 2013- 2014. (3) Investigations and testing of 4 boilers for two hotels in Hurghada, Egypt, 2014 (4) Supervising of the installation process, testing, technical and receiving of 4 elevators for Faculty of Medicine Kafrelsheikh University, Egypt, 2014. (5) Supervising of the installation process, testing, technical and receiving of 2 elevators for Faculty of specific education Kafrelsheikh University, Egypt, 2014. (6) Design, specifications, working drawing and primary cost for 8 elevators for Kafrelsheikh University Hospital. In addition to, the supervising process on the installation process, testing, technical and receiving of them. Kafrelsheikh University Hospital, Egypt, 2013. (7) Design, specifications, working drawing and primary cost for 2 elevators for Faculty of education Kafrelsheikh University. In addition to, the supervising process on the installation process, testing, technical and receiving of them. Kafrelsheikh University, Egypt, 2013. (8) Design, specifications, working drawing and primary cost for 2elevators for Faculty of Nursing Kafrelsheikh University. In addition to, the supervising process on the installation process, testing, technical and receiving of them. Kafrelsheikh University, Egypt, 2013. (9) Design, specifications, working drawing and primary cost for 2elevators for Faculty of Fisheries Science and Fisheries Kafrelsheikh University. In addition to, the supervising process on the installation process, testing, technical and receiving of them. Kafrelsheikh University, Egypt, 2013. (10) Technical and financial evaluation of equipment’s, machine tools and accessories for Al-Menyawe Company, Sohag, Egypt 2002. (11) Preparation of design, specifications, working drawing and primary cost for 2 elevators for Assiut university faculty buildings. Also, the supervising process on their manufacturing and installation in addition to their testing, technical and final receiving of them. Assiut University, Egypt, 2007. (12) Preparation of design, specifications, working drawing and primary cost for 8 elevators for Assiut university Hospital. Also, the supervising process on their manufacturing and

17

installation in addition to their testing, technical and final receiving of them. Assiut University, Egypt, 2006. (13) Preparation of design, specifications, working drawing and primary cost for 2 elevators for Assiut university examination halls. Also, the supervising process on their manufacturing and installation in addition to their testing, technical and final receiving of them. Assiut University, Egypt, 2006. (14) The supervising process for the manufacturing and installation in addition to testing, technical and final receiving of 2 hot water reservoirs for Assiut university students houses. Assiut University, Egypt, 2006. (15) Revisions and approving of the working drawing for punches dies that used in production of ceramic tails, EGY MOLD Company, ELPOEAK, 6 October City, Egypt, 2006. (16) Failure diagnoses of the premature failure for a new crank shaft for south valley university bus, South Valley University, Aswan branch, Aswan, Egypt, 2001. (17) Supervision of investigations, repairing and maintenance processes for out of order machine tools in faculty of engineering workshop, Assiut University, Assiut, Egypt. (18) Preparing technical investigations, testing and writing a technical report about issue No. 2308 for Year 48 to the Egyptian Higher Management Court, Circle No. 5, Giza, Egypt, 2006. (19) Member of technical comity of the faculty of engineering workshop, Assiut University, Assiut, Egypt. (20) Preparation of technical reports for a- Suitability or changing of the control unit for the elevator of the biology department, Faculty of science, Assiut University, Egypt, 2005. b- Suitability or changing of the control unit for the elevator of the biology department, Faculty of agriculture, Assiut University, Egypt, 2004. c- C Suitability or changing of the control unit for the elevator of the biology department, Faculty of Pharmacy, Assiut University, Egypt, 2004. d- Maintenance process of seven elevators at faculties of commerce, law, science and physical arts and houses of residence for students and demonstrators, Assiut University, Egypt, 2005. (21) Revision of the 12 new slandered and specifications for the Egyptian authority for standardization and quality which are; 1. مسامير مصنوعة من أسالك الصلب للتطبيقات العامة 2. كراسى التحميل الدحروجية بصف واحد من الدحاريج االسطوانية - أبعاد التشطيب للدعامة الحرة والجوانب بدون دعامة. 3. كراسى التحميل الدحروجية دحاريج ابرية - األبعاد و التفاوتات. 4. كراسى التحميل الدحروجية بصف واحد من الدحاريج الكروية و تالمس زاوى - أبعاد الشطب للحلقة الخارجية- بدون دفع جانبى . 5. كراسى الدحاريج الكراسى المترية ذات الدحاريج االسطوانية المسلوبة حدود األبعاد وترميز المتسلسالت.

18

6. الخواص الميكانيكية الدوات التثبيت المصنوعة من الصلب السبائكى مسامير الرباط مسامير التثبيت والجويط. 7. اسطوانات الغاز الصغيرة لالغراض الطبية وصالت المحبس من النوع الزرجينة ذات مسمار دليل . 8. الرسومات الفنية متطلبات النسخ و التصغير. 9. اسطوانات الغاز متكررة التعبئة المصنوعة من الصلب غير الملحوم- التصميم والتصنيع و االختبار. الجزء االول اسطوانات من الصلب المقسى و المطبع ذو مقاومة شد اقل من 1100 ميجا بسكالز 10. الحبال الصلب لالغراض العامة الحد االدنى للمتطلبات . 11. مواسير الزهر المرن اللوازم و الملحقات ووصالتها الستخدامات المياه أو الغاز. 12. الفيروفسفور .

19

22- Workshops and Training Courses Attendance

1- A workshop and training course on Information Technology systems "Effective presentations" December 23-26 2018, Center of Faculty and Leadership Development, Kafrelsheikh University, Egypt. 2- A workshop and training course on Information Technology systems "Data base" December 17-20 2018, Center of Faculty and Leadership Development, Kafrelsheikh University, Egypt. 3- A workshop and training course on New NARS for engineering, May 2018, NAQAA, Cairo, Egypt. 4- A workshop and training course on Publishing integrity and transparency values and awareness of corruption effects, January 1 : February 2, 2018, ALREQABA ALEDARIYA, Egypt. Cairo, 5- Blackboard training workshop, eLearning Center, King Khaled University, January 17: January 19, 2009, KSA. 6- 2nd Spring school on Current Activities of Material Science, April 22 – 26, 2000, Assiut University, Egypt. 7- Workshop on "Explosive and fire preventive maintenance" April 7, 2004, Faculty of Engineering, Assiut University, Egypt. 8- Workshop on "Effect of reference materials and tools on improvement of product quality and laboratories accreditations" April 7, 2004, Faculty of Engineering, Assiut University, Egypt. 9- A training course in Electron microscopy (Techniques and interpretations), March 26- 31, 2005, Electron Microscopy Unit, Assiut University, Egypt. 10- A work shop and training course on "Decision making and solving problems" April 16-19, 2005, Center of Faculty and Leadership Development, Assiut University, Egypt. 11- A work shop and training course on "Egyptian Universities Law" April 26-28 2005, Center of Faculty and Leadership Development, Assiut University, Egypt. 12- A work shop and training course on "New Trends in Teaching" March 25-27 2006, Center of Faculty and Leadership Development, Assiut University, Egypt. 13- A work shop and training course on "Time Management and work pressure" April 8-11, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt. 14- A work shop and training course on "Accreditation and Quality Assurance" April 26-27, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt. 15- A work shop and training course on "Course Design" May 13-14, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt. 16- A work shop and training course on "Teaching using Technology" May 6-9, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt. 17- A work shop and training course on "Teaching Evaluations" May 20-22, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt.

20

18- A work shop and training course on "Financial Supporting and Economics of Scientific Research" May 13-14, 2006, Center of Faculty and Leadership Development, Assiut University, Egypt.

23- Reviewing Master and PhD thesis

1- Master thesis for Assiut University, Egypt 2009. 2- Master thesis for Assiut University, Egypt 2010. 3- PhD thesis for Malaya University, Malaysia 2011. 4- Master thesis for Assiut University, Egypt 2012. 5- Master thesis for , Egypt 2012. 6- Master thesis for Mansoura University, Egypt 2013. 7- Master thesis for Zagazig University, Egypt 2013. 8- PhD thesis for Malaya University, Malaysia 2014. 9- PhD thesis for Assiut University, Egypt 2014. 10- PhD thesis for Zagazig University, Egypt 2014. 11- Two Master thesis’s for Assiut University, Egypt 2014. 12- Three PhD thesis for Malaya University, Malaysia 2015. 13- Three Master thesis for Tanta university, Egypt, 2014, 2016 14- One PhD thesis for Malaya University, Malaysia 2016. 15- One PhD thesis for Faculty of engineering at Shobra, , 2016. 16- One PhD thesis for Faculty of engineering at Shobra, Benha University, 2016. 17- Three Master thesis for Faculty of engineering at Shobra, Benha university, Egypt, 2017 18- One master thesis for Cairo university 2018 19- Two Master theses for Port Saied University, Egypt 2018. 20- One master thesis for Military technical college 2018

21