Polybutadiene Rubber (PBR) Is a Synthetic Rubber. PBR Is Produced by the Polymerization of 1,3-Butadiene

Total Page：16

File Type：pdf, Size：1020Kb

Polybutadiene rubber (PBR) is a synthetic rubber. PBR is produced by the polymerization of 1,3-butadiene. PBR has a high resistance to abrasion and is mostly used in the manufacture of tires. About 75% of the production of this material is consumed in the rubber industry. Another 25% is used as an additive to improve the toughness (impact resistance) of plastics such as High-Impact Polystyrene (HIPS) and Acrylonitrile-Butadiene-Styrene (ABS). PBR accounts for about a quarter of the total global consumption of synthetic rubbers. The PBR is produced by the following reaction: High-cis polybutadiene Low-cis polybutadiene High-vinyl polybutadiene High-trans polybutadiene www.rayeneh.com Low-cis polybutadiene is used for producing of high-impact polystyrene, but high-cis is used in tires, shoes, car parts and golf balls. In the low-cis type, the cis percentage should not exceed 35% by weight, but in the high-cis type, it should be more than 95% by weight. The catalyst used determines the type of produced polybutadiene rubber. PBR is supplied in bale weight (35 kg) or in box weight (1050 kg). These packages should be stored in cool, dry warehouses away from heat sources and other chemicals. The storage temperature of these materials should not exceed 30° C. It should be noted that the remnants of this polymer composition should not be discharged into streams and sewage under any circumstances. Rayenehdaran Company is fully prepared to supply the PBR continuously and just in time delivery at a competitive price. Rayeneh Group is an international supplier of chemicals, catalysts, and equipment in the Oil, Gas, Petrochemical, and Mine Industries. Since its establishment in 1999, Rayeneh has continuously strived to reach new markets while offering world class services. As of today, Rayneh Group operate international ofﬁ ces in our territory with unique access to sources of high-quality chemicals, and is one of major players in the chemicals market. As dictated by our policy, “Serving Our Clients Beyond Their requirements ” has always been at the forefront of our operations..

Copy Link

Recommended publications

Synthesis and Characterization of Copolymers Based On
SYNTHESIS AND CHARACTERIZATION OF COPOLYMERS BASED ON 2,3,4,5,6-PENTAFLUOROSTYRENE A Dissertation Presented to The Graduate Faculty of The University of Akron In Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy Marta Paz Pazos December, 2005 SYNTHESIS AND CHARACTERIZATION OF COPOLYMERS BASED ON 2,3,4,5,6-PENTAFLUOROSTYRENE Marta Paz Pazos Dissertation Approved: Accepted: ______________________________ ______________________________ Advisor Department Chair Dr. Coleen Pugh Dr. Mark D. Foster ______________________________ ______________________________ Committee Chair Dean of the College Dr. William J. Brittain Dr. Frank N. Kelley ______________________________ ______________________________ Committee Member Dean of the Graduate School Dr. Stephen Cheng Dr. George R. Newkome ______________________________ Committee Member Dr. Wayne L. Mattice ______________________________ Committee Member Dr. Peter L. Rinaldi i i ABSTRACT 2,3,4,5,6-Pentafluorostyrene (PFS) was polymerized in the presence of a solution of polybutadiene (PB) in tetrahydrofuran using benzoyl peroxide as the radical initiator at 50, 60, 80 ºC. The products were graft copolymers of poly(2,3,4,5,6-pentafluorostyrene) (PPFS) into PB. The copolymerizations follow typical free radical polymerization kinetics and behavior, with the rate of propagation proportional to the monomer concentration and the square root of the initiator concentration. Gel permeation chromatography (GPC) equipped with two detectors (UV and refractive index) has allowed us to determine conversion of the monomer, graft efficiency, graft ratio and graft frequency of the grafted products obtained at different temperatures and initiator concentrations, without the need of purification and/or isolation of the final graft copolymer. Conversion of the monomer and graft ratio increase and grafting frequency decreases with increasing temperature and initiator concentration.
[Show full text]
Total Cray Valley Product Guide
PRODUCT GUIDE CONTENTS PROFILE 02 MARKET 04 BREAKDOWN LIQUID POLYBUTADIENES 06 Ricon® | Ricobond® | Ricon MA® LIQUID 08 POLYBUTADIENES (continued) Krasol® | Poly bd® | Specialty Ricon® METALLIC MONOMERS 10 Dymalink® HYDROCARBON 12 RESINS Wingtack® | Cleartack® PROFILE TOTAL Cray Valley manufactures and supplies diene- based liquid homopolymers and copolymers, C5 and C9 hydrocarbon tackifying resins, derivatives, metallic monomer salts of acrylic and methacrylic acid, and specialty monomer products. TOTAL Cray Valley sells these products under the Ricon®, Ricobond®, Krasol®, Poly bd®, Wingtack®, Cleartack®, and Dymalink® brand names. TOTAL Cray Valley focuses on rubber and adhesives, while also supporting other traditional markets and new opportunities in the electronics, coatings, and plastics modification areas. The many technologies for TOTAL Cray Valley lead to molecular structures in our products that promote rheology control, crosslinking, adhesion, sealing, reactive intermediates, polymer synthesis, and dispersion. Continuous improvement and technology innovation enables TOTAL Cray Valley to capitalize on new products and manufacturing excellence. These synergies lead to increased value in our markets and business growth for our customers. Liquid Polybutadienes 03 TOTAL CRAY VALLEY TOTAL Cray Valley is part of TOTAL Refining and Chemicals Global Polymers Division. TOTAL Cray Valley is a global manufacturer of specialty low-molecular-weight functional additives based on a variety of unique chemistries. Included are functional diene-based polymers, (meth)acrylate- functional metallic monomers, and aromatic and aliphatic hydrocarbon resins based on C5 and C9 feed streams that can serve a wide variety of applications in the adhesives, rubber, and thermoplastics industries. We work closely with our customers, and our ambition is to offer them the solutions that best fulfill the latest needs of the markets in which they operate.
[Show full text]
Improvement of Devulcanization Yield During Reclamation Ofwaste Tires
Global Journal of Researches in Engineering Chemical Engineering Volume 13 Issue 1 Version 1.0 Year 2013 Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals Inc. (USA) Online ISSN: 2249-4596 & Print ISSN: 0975-5861 Improvement of Devulcanization Yield during Reclamation of Waste Tires By Dr. Kalrenganathan Sharma Lone Star College University Park Abstract - Waste tire recycling has become a bigger environmental problem. Despite regulations waste tires are stockpiled and often are breeding ground for west Nile virus and mosquitoes that cause pandemic. A number of times waste tires are incinerated or pyrolysis. Reclamation of value in the rubber portion of the waste tires may be more profitable and more environmentally benign compared with incineration and fuel use methods. Devulcanization and depolymerization reactions can lead to recovery of polybutadiene and butadiene monomer. Competing parallel reactions after the devulcanization step is studied in more detail. Dynamics of the general Denbigh scheme of reactions in a CSTR is studied. The composition of the species involved is obtained as a function of time from model solutions. A general state space form is proposed for simultaneous series-parallel reactions. Types of instability that may arise depends on the eigenvalues of the system. The Eigenvalues of the sparse matrix indicate that the system is of the integrating type. Solutions can be obtained from the eigenvalues for 7 species. Information from the model solution can be used to optimize the yield of rubber during reclamation of rubber from waste tires. GJRE-C Classification : FOR Code: 900402 Improvement of Devulcanization Yield during Reclamation of Waste Tires Strictly as per the compliance and regulations of : © 2013.
[Show full text]
7: Source-Based Nomenclature for Copolymers (1985)
7: Source-Based Nomenclature for Copolymers (1985) PREAMBLE Copolymers have gained considerable importance both in scientific research and in industrial applications. A consistent and clearly defined system for naming these polymers would, therefore, be of great utility. The nomenclature proposals presented here are intended to serve this purpose by setting forth a system for designating the types of monomeric-unit sequence arrangements in copolymer molecules. In principle, a comprehensive structure-based system of naming copolymers would be desirable. However, such a system presupposes a knowledge of the structural identity of all the constitutional units as well as their sequential arrangements within the polymer molecules; this information is rarely available for the synthetic polymers encountered in practice. For this reason, the proposals presented in this Report embody an essentially source-based nomenclature system. Application of this system should not discourage the use of structure-based nomenclature whenever the copolymer structure is fully known and is amenable to treatment by the rules for single-strand polymers [1, 2]. Further, an attempt has been made to maintain consistency, as far as possible, with the abbreviated nomenclature of synthetic polypeptides published by the IUPAC-IUB Commission on Biochemical Nomenclature [3]. It is intended that the present nomenclature system supersede the previous recommendations published in 1952 [4]. BASIC CONCEPT The nomenclature system presented here is designed for copolymers. By definition, copolymers are polymers that are derived from more than one species of monomer [5]. Various classes of copolymers are discussed, which are based on the characteristic sequence arrangements of the monomeric units within the copolymer molecules.
[Show full text]
Elastomeric Materials
ELASTOMERIC MATERIALS TAMPERE UNIVERSITY OF TECHNOLOGY THE LABORATORY OF PLASTICS AND ELASTOMER TECHNOLOGY Kalle Hanhi, Minna Poikelispää, Hanna-Mari Tirilä Summary On this course the students will get the basic information on different grades of rubber and thermoelasts. The chapters focus on the following subjects: - Introduction - Rubber types - Rubber blends - Thermoplastic elastomers - Processing - Design of elastomeric products - Recycling and reuse of elastomeric materials The first chapter introduces shortly the history of rubbers. In addition, it cover definitions, manufacturing of rubbers and general properties of elastomers. In this chapter students get grounds to continue the studying. The second chapter focus on different grades of elastomers. It describes the structure, properties and application of the most common used rubbers. Some special rubbers are also covered. The most important rubber type is natural rubber; other generally used rubbers are polyisoprene rubber, which is synthetic version of NR, and styrene-butadiene rubber, which is the most important sort of synthetic rubber. Rubbers always contain some additives. The following chapter introduces the additives used in rubbers and some common receipts of rubber. The important chapter is Thermoplastic elastomers. Thermoplastic elastomers are a polymer group whose main properties are elasticity and easy processability. This chapter introduces the groups of thermoplastic elastomers and their properties. It also compares the properties of different thermoplastic elastomers. The chapter Processing give a short survey to a processing of rubbers and thermoplastic elastomers. The following chapter covers design of elastomeric products. It gives the most important criteria in choosing an elastomer. In addition, dimensioning and shaping of elastomeric product are discussed The last chapter Recycling and reuse of elastomeric materials introduces recycling methods.
[Show full text]
Bunatm Cb Polybutadiene Rubber for Hips &
BUNATM CB POLYBUTADIENE RUBBER FOR HIPS & ABS For plastic modification ARLANXEO produces Besides our widely used Li-BRs, we have succeeded in polybutadiene by a solution polymerization process the production of Neodymium-based Butadiene Rubbers which enables the production of pure, clear, and (Nd-BR) for the HIPS application. These Nd-BRs allow virtually gel free products. for the production of HIPS resins with a higher rubber efficiency and superior properties. Similar mechanical Our Lithium-based Butadiene Rubbers (Li-BR) are properties (impact strength, modulus) can be reached manufactured via an anionic process producing highly with less amount of Nd-BR. Consequently, the uniform polymers that are particularly suited for the use mechanical properties of HIPS resins produced with Nd- in high impact polystyrene (HIPS) and for the mass- BR are similar (with less amount of rubber) or even solution polymerization of acrylonitrile-butadiene-styrene superior (with similar amount of rubber) to those of resins (m-ABS). resins based on corresponding Li-BRs. PRODUCT PORTFOLIO Lithium Butadiene Rubber for HIPS (Li-BR) Name Plant Mooney Solution Viscosity (MU) (mPa·s) BunaTM CB 550 Orange, TX 54 163 BunaTM CB 380 Orange, TX 38 90 BunaTM CB 70 GPT Cabo 69.5 250 BunaTM CB 55 GPT Cabo 53 168 BunaTM CB 530 T Pt. Jérôme 68 250 BunaTM CB 550 T Pt. Jérôme 54 163 BunaTM CB 550 IP Pt. Jérôme 54 163 BunaTM CB 565 T Pt. Jérôme 60 44 Neodymium Butadiene Rubber for HIPS (Nd-BR) Name Plant Mooney Solution Viscosity (MU) (mPas) BunaTM CB 728 T Orange, TX 44
[Show full text]
Thermal Decomposition of Cross-Linked Polybutadiene and Its Copolymers David D
Marquette University e-Publications@Marquette Chemistry Faculty Research and Publications Chemistry, Department of 9-1-1999 Thermal Decomposition of Cross-linked Polybutadiene and its Copolymers David D. Jiang Marquette University Galina F. Levchik Belorussian State University Sergei V. Levchik Belorussian State University Charles Wilkie Marquette University, [email protected] Accepted version. Polymer Degradation and Stability, Vol. 65, No. 3 (September 1999): 387-394. DOI. © 1999 Elsevier. Used with permission. Marquette University e-Publications@Marquette Chemistry Faculty Research and Publications/College of Arts and Sciences This paper is NOT THE PUBLISHED VERSION; but the author’s final, peer-reviewed manuscript. The published version may be accessed by following the link in the citation below. Polymer Degradation and Stability, Vol. 65, No. 3 (September, 1999): 387-394. DOI. This article is © Elsevier and permission has been granted for this version to appear in e- Publications@Marquette. Elsevier does not grant permission for this article to be further copied/distributed or hosted elsewhere without the express permission from Elsevier. Thermal decomposition of cross-linked polybutadiene and its copolymers David D.Jiang Department of Chemistry, Marquette University, Milwaukee, WI Galina F.Levchik Research Institute for Physical Chemical Problems, Belarussian State University, Belarus Sergei V.Levchik Research Institute for Physical Chemical Problems, Belarussian State University, Belarus Charles A.Wilkie Department of Chemistry, Marquette University, Milwaukee, WI Abstract Polybutadiene and two copolymers containing butadiene and styrene have been cross-linked by thermal processes, by the use of initiators in solution, and by intimately mixing an initiator with the polymer and then heating this blend. The most efficient cross-linking process is the use of an intimate blend of the initiator and polymer.
[Show full text]
Tire Compounds Containing Syndiotactic-1,2-Polybutadiene
iuropaisches Patentamt Patent Office © Publication number: 0 307 341 ® 0 ■uropean A1 )ffice europeen des brevets EUROPEAN PATENT APPLICATION (5) Application number: 88G30160.5 © Int. CI 4: B 60 C 1/00 C 08 L 9/00 @ Date of filing: 07.09.88 @ Priority: 11.09.87 US 95205 © Applicant: THE GOODYEAR TIRE & RUBBER COMPANY 1144 East Market Street Akron, Ohio 44316-0001 (US) © Date of publication of application: 15.03.89 Bulletin 89/11 © Inventor: Sandstrom, Paul Harry States: DE ES FR GB IT 96 Milton Drive @ Designated Contracting Tallmadge Ohio 44278 (US) Maly, Neil Arthur 953 Maple Street Tallmadge Ohio 44278 (US) Marinko, Mark Andrew 4470 Timberdale Drive Stow Ohio 44224 (US) @ Representative: Weyland, Joseph Jean Pierre Goodyear International Tire Technical Center Patent Department Avenue Gordon Smith L-7750 Colmar-Berg (LU) @ Tire compounds containing syndiotactic-1 ,2-polybutadiene. (g) The subject invention discloses the use of syndiotactic- 1 ,2-polybutadiene in the supporting carcass and/or innerliner of a tire. The incorporation of syndiotactic-1 ,2-polybutadiene into rubber compositions which are utilized in the supporting carcass or innerliner of tires greatly improves the green strength of those compositions. The incorporation of syndio- tactic-1 ,2-polybutadiene into halogenated butyl rubbers which are utilized as innerliner compositions also greatly improves the scorch safety of such compositions. The subject invention more specifically discloses a pneumatic rubber tire which comprises a circumferential rubber tread, a supporting carcass therefor, two spaced beads, two rubber sidewalls connecting said beads and an innerliner; wherein said supporting carcass is comprised of from 1 to 25 phr of syndiotactic-1 ,2-polybuta- CO diene having a melting point which is within the range of 120°C to 190°C and at least one rubber selected from the group and o consisting of polyisoprene, styrene-butadiene rubber, CO polybutadiene rubber.
[Show full text]
Characterization and Selection of Hydroxyl-Terminated Polybutadiene Polymers for High-Strain Applications
The University of Southern Mississippi The Aquila Digital Community Honors Theses Honors College Spring 5-2018 Characterization and Selection of Hydroxyl-Terminated Polybutadiene Polymers for High-Strain Applications Nathaniel Prine University of Southern Mississippi Follow this and additional works at: https://aquila.usm.edu/honors_theses Part of the Polymer and Organic Materials Commons Recommended Citation Prine, Nathaniel, "Characterization and Selection of Hydroxyl-Terminated Polybutadiene Polymers for High-Strain Applications" (2018). Honors Theses. 561. https://aquila.usm.edu/honors_theses/561 This Honors College Thesis is brought to you for free and open access by the Honors College at The Aquila Digital Community. It has been accepted for inclusion in Honors Theses by an authorized administrator of The Aquila Digital Community. For more information, please contact [email protected]. The University of Southern Mississippi Characterization and Selection of Hydroxyl-Terminated Polybutadiene Polymers for High-Strain Applications by Nathaniel Prine A Thesis Submitted to the Honors College of The University of Southern Mississippi in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in the Department of Polymer Science May 2018 ii Approved by _____ Robson F. Storey, Ph.D., Thesis Advisor School of Polymer Science and Engineering ____ Jeffery S. Wiggins, Ph.D., Director School of Polymer Science and Engineering ___ Ellen Weinauer, Ph.D., Dean Honors College iii Abstract Understanding the behavior of hydroxyl-terminated polybutadiene (HTPB) as a composite matrix is imperative for the development of future military and aerospace munition technology. As a vital component of solid rocket fuel, HTPB strongly contributes to the fatigue behavior, burn-rate, and other properties that can cause critical failure of the rocket if not formulated properly.
[Show full text]
The Effects of Heat Aging on Acrylonitrile-Butadiene
THE EFFECTS OF HEAT AGING ON ACRYLONITRILE–BUTADIENE– STYRENE (ABS) BLENDS Heat aging of ABS blends B.E. TIGANIS and L.S. BURN CSIRO Building, Construction and Engineering, Victoria, Australia Durability of Building Materials and Components 8. (1999) Edited by M.A. Lacasse and D.J. Vanier. Institute for Research in Construction, Ottawa ON, K1A 0R6, Canada, pp. 912-922. Ó National Research Council Canada 1999 Abstract Degradation of thick ABS materials at elevated temperatures is observed to be predominantly a surface effect which deteriorates the bulk mechanical properties under impact conditions. It is postulated that a critical level of surface degradation initiates polymer crazing in the rubbery butadiene phase, which propagates through the polymer, causing failure. A physico-mechanical study of the effects of heat aging on the rubbery phase in ABS reveals an increase in the loss modulus and tan d, demonstrating a decrease in the free volume which may be due to cross-linking of free radicals formed by hydrogen abstraction and chain scission. Microscope FTIR spectroscopy of aged ABS surfaces shows that the degree of butadiene unsaturation decreases with time, and that carbonyl and hydroxyl absorbances increase as expected with thermo-oxidative degradation. Degradation of the rubbery polybutadiene phase in ABS may be initiated by hydrogen abstraction from the carbon a to unsaturated bonds, producing hydroperoxide radicals leading to carbonyl and hydroxyl products. Cross-linking is facilitated by the free radicals produced. Heat aging of ABS at elevated temperatures below the glass transition (Tg) of the SAN phase causes physical aging. This aging of the SAN phase provides thermal energy which allows for a structural reconfiguration of the glassy morphology towards an amorphous polymer.
[Show full text]
Hydroxyl Terminated Polybutadiene Resins and Derivatives - Poly Bd® and Krasol®
Product Bulletin Hydroxyl Terminated Polybutadiene Resins and Derivatives - Poly bd® and Krasol® TABLE OF CONTENTS Introduction .............................................................................................................. 4 Functionalized Polybutadiene Resins Currently Offered by Cray Valley Company ...... 5 Product Bulletins Hydroxyl Terminated Polybutadienes Poly bd® R-45HTLO Resin ............................................................................... 6 Poly bd® R-45M Resin...................................................................................... 7 Poly bd® R-20LM Resin ................................................................................... 8 Poly bd ® LF1 .................................................................................................... 9 Poly bd ® LF2 .................................................................................................. 10 Poly bd ® LF3 .................................................................................................. 11 Poly bd® 600E ................................................................................................ 12 Poly bd® 605E ................................................................................................ 13 Poly bd® 2035TPU ......................................................................................... 14 Poly bd® 3027TPU ......................................................................................... 15 Krasol® LBH2000 ..........................................................................................
[Show full text]
Impact Behaviour of Acrylonitrile-Butadiene-Styrene After Temperature and Humidity Load
MATEC Web of Conferences 125, 02048 (2017) DOI: 10.1051/ matecconf/201712502048 CSCC 2017 Impact behaviour of acrylonitrile-butadiene-styrene after temperature and humidity load Lenka Hylova 1,*, Miroslav Manas1 1Tomas Bata University in Zlin, nam. T. G. Masaryka 5555, 76001 Zlin, Czech Republic Abstract. This study deals with acrylonitrile-butadiene-styrene (ABS) which was subjected the drop-weight test before and after temperature and humidity load. ABS is an engineering plastic and also an important engineering terpolymer, which has butadiene part uniformly distributed through the acrylonitrile-styrene matrix and is commonly used in production of automotive interior components. The injection moulded ABS samples were subjected the penetration test at fall height 100 J before and after temperature and humidity load and the results were subsequently evaluated and discussed. It was found out that ABS after temperature and humidity load has lower impact resistance. 1 Introduction construction, computer and business equipment, personal care products, toys, medical devices and in automotive Acrylonitrile-butadiene-styrene (ABS) is an engineering interior components [1-3]. plastic and also an important engineering terpolymer, Brazilian scientists investigated three types of which has butadiene part uniformly distributed through commercial ABS, namely GP (ABS for general-purpose the acrylonitrile-styrene matrix. ABS was use), HI (an ABS high impact) and HH (ABS high heat commercialized at the latter of 1940s by U.S. Rubber and resistance). They studied activation energy of all three originally was made by blending of polystyrene-co- ABS and they realized that it is much higher than acrylonitrile (SAN) and NBR acrylonitrile-butadiene reported in the literature.
[Show full text]