Standards Confirmed
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Portafolio De Servicios
• ISO/IEC 27001 – Seguridad de la Información. Determina procesos, controles y mecanismos para proteger la información mediante la preservación de su confidencialidad, integridad y disponibilidad, proporcionando confianza a las partes interesadas. Otros Servicios • ISO 37001 – Anti-Soborno. Este esquema promueve una cultura de Evaluación organizacional ética e implementa los controles adecuados para la NO ACREDITADOS detección, atención y erradicación de prácticas de corrupción en organismos privados y públicos. ▪ ISO 18295 – Centros de Contacto con el Cliente Normas Mexicanas: ▪ ISO 18788 – Operaciones de Seguridad Privada ▪ ISO 21001 – Gestión de Organizaciones Educativas • NOM 035 STPS – Factores de Riesgo Psicosocial en el Trabajo. Establece ▪ ISO 28000 – Seguridad de la Cadena de Suministro los elementos para identificar, analizar y prevenir los factores de riesgo psicosocial, así como para promover un entorno organizacional favorable ▪ ISO 31000 – Gestión de Riesgos en los centros de trabajo. (Norma en proceso de acreditación y aprobación). ▪ ISO/IEC 38500 – Gobierno de TI ▪ ISO 39001 – Seguridad Vial ▪ ISO 50001 – Gestión de la Energía Otros Servicios de ▪ Evaluación de Proveedores ▪ NMX-I-319-NYCE-2018 – Escuelas Responsables Certificación y Evaluación en el Uso de Internet Portafolio ▪ PDPPSO – Protección de Datos Personales También le invitamos a que certifique o evalúe su Organización en los siguientes Esquemas que Normalización y en Posesión de Sujetos Obligados Certificación NYCE, una empresa más de Grupo NYCE, tiene acreditados: ▪ GDPR – General Data Protection Regulation (Reglamento de la Unión Europea) • Esquema de Protección de Datos Personales. Ayuda a evaluar y certificar el cumplimiento de organizaciones, responsables y encargadas, de acuerdo con el marco legal mexicano vigente. de Servicios • ISO/IEC 29110 - Desarrollo y Mantenimiento de Software. -
Evitalia NORMAS ISO En El Marco De La Complejidad
No. 7 Revitalia NORMAS ISO en el marco de la complejidad ESTEQUIOMETRIA de las relaciones humanas FRACTALIDAD en los sistemas biológicos Dirección postal Calle 82 # 102 - 79 Bogotá - Colombia Revista Revitalia Publicación trimestral Contacto [email protected] Web http://revitalia.biogestion.com.co Volumen 2 / Número 7 / Noviembre-Enero de 2021 ISSN: 2711-4635 Editor líder: Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. Globuss Biogestión [email protected] ORCID: 0000-0002-1947-5589 Par evaluador: Jhon Eyber Pazos Alonso Experto en nanotecnología, biosensores y caracterización por AFM. Universidad Central / Clúster NBIC [email protected] ORCID: 0000-0002-5608-1597 Contenido en este número Editorial p. 3 Estequiometría de las relaciones humanas pp. 5-13 Catálogo de las normas ISO en el marco de la complejidad pp. 15-28 Fractalidad en los sistemas biológicos pp. 30-37 Licencia Creative Commons CC BY-NC-ND 4.0 2 Editorial: “En armonía con lo ancestral” Juan Pablo Ramírez Galvis. Consultor en Biogestión, NBIC y Gerencia Ambiental/de la Calidad. [email protected] ORCID: 0000-0002-1947-5589 La dicotomía entre ciencia y religión proviene de la edad media, en la cual, los aspectos espirituales no podían explicarse desde el método científico, y a su vez, la matematización mecánica del universo era el único argumento que convencía a los investigadores. Sin embargo, más atrás en la línea del tiempo, los egipcios, sumerios, chinos, etc., unificaban las teorías metafísicas con las ciencias básicas para dar cuenta de los fenómenos en todas las escalas desde lo micro hasta lo macro. -
EXAMINING EVIDENCE-BASED MANAGEMENT SKILLS in PUBLIC SCHOOL ADMINISTRATORS by Michael Leitera Submit
KNOWLEDGE BASE REVISITED: EXAMINING EVIDENCE-BASED MANAGEMENT SKILLS IN PUBLIC SCHOOL ADMINISTRATORS By Michael Leitera Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor in Educational Leadership YOUNGSTOWN STATE UNIVERSITY December, 2019 KNOWLEDGE BASE REVISITED: EXAMINING EVIDENCE-BASED MANAGEMENT SKILLS IN PUBLIC SCHOOL ADMINISTRATORS Michael T. Leitera I hereby release this dissertation to the public. I understand that this dissertation will be made available from the OhioLINK ETD Center and the Maag Library Circulation Desk for public access. I also authorize the University or other individuals to make copies of this thesis as needed for scholarly research. Signature: ________________________________________________ Michael T. Leitera, Student Date Approvals: Dr. Karen H. Larwin, Dissertation Chair Date Dr. Lauren Cummins, Committee Member Date Dr. Patrick Spearman, Committee Member Date Dr. Vaughn Bicehouse, Committee Member Date Dr. Salvatore A. Sanders, Dean of Graduate Studies Date ii Abstract Research supports the theory that evidence-based management practices increase efficiencies in organizations. This study explores the use of evidence-based management among school principals and recognizes the differences with the autonomy and accountability of school system administrators. The review of literature examines the history of management in education, the ongoing debate over a knowledge base for educational administration, positivism and postmodern considerations, and a more utilitarian approach to the epistemological debate in educational leadership. The research study instrument is based upon an adapted World Management Survey, Education Instrument (World Management Survey, n.d.) and uses forced-choice survey and narrative response formats. Basic descriptive statistics were computed and analyzed and indicated a moderate level of application [operations, (M= 3.6), performance, (M= 3.69), target, (M= 3.45), and talent, (M= 3.02)] for each of the management factors measured by the survey. -
Ethical Hacking
Training Catalog Year 2020 Digital Marketing Information Technology + Human Resourses Project Management Business Analysis Cyber Security Soft Skills ISO Application Development Languages Milan - Italy About Us Vantisco is an accredited training provider and examination organization located in Milan. Our training courses cover a broad range of subjects in Information Technology, Digital Marketing, ISO, Cyber Security, Data Analysis, Block chain, Articial Intelligence, Soft Skills, Project Management, Application Development and Languages Center.... Our courses are accredited by renowned exam institutions, including EXIN, BCS, Microsoft, The Open Group, CCC, Wileys, DASA...Taught by Experts in the eld using professionally equipped venues with guaranteed pre and post course support. Our Delivery Mode: • Self Paced Training • Instructor Led Live Online Training • On-premise classroom Training • Corporate Customized Training Instructor-Led Self Paced Live, Online Training Training On-Premise Corporate Classroom Customized Training Training We can deliver a customized program suited to the training needs of your company and employees. We can help you identify training needs and create bespoke programs for training to be delivered by either our training specialists or staff from your own department. To find out more about our corporate offerings, please get in touch with us: [email protected]. Self Paced Training Security Awareness and Compliance Tehcnology Tehcnology Project Management Project Management Agile and Scrum ApAplgiiclaet aionnd DSecvreulmopment Big Data & Analytics Blockchain Business & Soft Skills Cloud Computing DevOps IT Compliance and Governance Information Security Financial Management Operating System Service Management Security Awareness and Compliance Security Awareness Essentials Leading a Secure Organization Human error continues to be the While cybersecurity is now clearly biggest threat to information security. -
ISO/IEC JTC 1 N13604 ISO/IEC JTC 1 Information Technology
ISO/IEC JTC 1 N13604 2017-09-17 Replaces: ISO/IEC JTC 1 Information Technology Document Type: other (defined) Document Title: Study Group Report on 3D Printing and Scanning Document Source: SG Convenor Project Number: Document Status: This document is circulated for review and consideration at the October 2017 JTC 1 meeting in Russia. Action ID: ACT Due Date: 2017-10-02 Pages: Secretariat, ISO/IEC JTC 1, American National Standards Institute, 25 West 43rd Street, New York, NY 10036; Telephone: 1 212 642 4932; Facsimile: 1 212 840 2298; Email: [email protected] Study Group Report on 3D Printing and Scanning September 11, 2017 ISO/IEC JTC 1 Plenary (October 2017, Vladivostok, Russia) Prepared by the ISO/IEC JTC 1 Study Group on 3D Printing and Scanning Executive Summary The purpose of this report is to assess the possible contributions of JTC 1 to the global market enabled by 3D Printing and Scanning. 3D printing, also known as additive manufacturing, is considered by many sources as a truly disruptive technology. 3D printers range presently from small table units to room size and can handle simple plastics, metals, biomaterials, concrete or a mix of materials. They can be used in making simple toys, airplane engine components, custom pills, large buildings components or human organs. Depending on process, materials and precision, 3D printer costs range from hundreds to millions of dollars. 3D printing makes possible the manufacturing of devices and components that cannot be constructed cost-effectively with other manufacturing techniques (injection molding, computerized milling, etc.). It also makes possible the fabrications of customized devices, or individual (instead of identical mass-manufactured) units. -
Deliverable D7.5: Standards and Methodologies Big Data Guidance
Project acronym: BYTE Project title: Big data roadmap and cross-disciplinarY community for addressing socieTal Externalities Grant number: 619551 Programme: Seventh Framework Programme for ICT Objective: ICT-2013.4.2 Scalable data analytics Contract type: Co-ordination and Support Action Start date of project: 01 March 2014 Duration: 36 months Website: www.byte-project.eu Deliverable D7.5: Standards and methodologies big data guidance Author(s): Jarl Magnusson, DNV GL AS Erik Stensrud, DNV GL AS Tore Hartvigsen, DNV GL AS Lorenzo Bigagli, National Research Council of Italy Dissemination level: Public Deliverable type: Final Version: 1.1 Submission date: 26 July 2017 Table of Contents Preface ......................................................................................................................................... 3 Task 7.5 Description ............................................................................................................... 3 Executive summary ..................................................................................................................... 4 1 Introduction ......................................................................................................................... 5 2 Big Data Standards Organizations ...................................................................................... 6 3 Big Data Standards ............................................................................................................. 8 4 Big Data Quality Standards ............................................................................................. -
ISO Mai.Xlsx
Standard reference Title 1 ISO/IEC 23006-1:2018 Information technology -- Multimedia service platform technologies -- Part 1: Architecture 2 ISO 21001:2018 Educational organizations -- Management systems for educational organizations -- Requirements with guidance for use 3 ISO 17832:2018 Non-parallel steel wire and cords for tyre reinforcement 4 ISO 7240-5:2018 Fire detection and fire alarm systems -- Part 5: Point type heat detectors 5 ISO 18541-6:2018 Road vehicles -- Standardized access to automotive repair and maintenance information (RMI) -- Part 6: L-Category vehicle specific RMI use cases and requirements 6 ISO 1083:2018 Spheroidal graphite cast irons -- Classification 7 ISO 5496:2006/Amd 1:2018 Sensory analysis -- Methodology -- Initiation and training of assessors in the detection and recognition of odours -- Amendment 1 8 ISO/TS 19392-1:2018 Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 1: Minimum requirements and weathering 9 ISO/TS 19392-2:2018 Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 2: Determination and evaluation of resistance to rain erosion using rotating arm 10 ISO/TS 19392-3:2018 Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 3: Determination and evaluation of resistance to rain erosion using water jet 11 ISO 4730:2017/Amd 1:2018 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) -- Amendment 1: Enantiomeric distribution 12 ISO 20558-1:2018 Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -
Standardiseringsprosjekter Og Nye Standarder
Annonseringsdato: 2018-08-22 Listenummer: 17/2018 Standardiseringsprosjekter og nye standarder Listenummer: 17/2018 Side: 1 av 127 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - nasjonale prNS 3467 Steg og leveranser i byggeprosessen Stages and deliverables in the building process Språk: no Kommentarfrist: 2020.04.19 Standardforslag til høring - europeiske (CEN) prEN ISO 12718 Ikke-destruktiv prøving - Virvelstrømprøving - Terminologi (ISO/DIS 12718:2018) Non-destructive testing - Eddy current testing - Vocabulary (ISO/DIS 12718:2018) Språk: en Kommentarfrist: 2018.09.06 Standardforslag til høring - internasjonale (ISO) ISO 7001:2007/DAmd 101 PI CF 021: Dance hall or ballroom Språk: en Kommentarfrist: 2018.08.28 ISO 7001:2007/DAmd 102 PI PF 077 Drinking water fountain Språk: en Kommentarfrist: 2018.08.28 ISO 7001:2007/DAmd 103 PI PF 078 Elevator or lift for goods Språk: en Kommentarfrist: 2018.08.28 ISO 7001:2007/DAmd 104 PI PF 079 Men's changing room Språk: en Kommentarfrist: 2018.08.28 ISO 7001:2007/DAmd 105 PI PF 080 Pedestrian overpass or footbridge Språk: en Kommentarfrist: 2018.08.28 ISO 7001:2007/DAmd 106 PI PF 081 Women's changing room Språk: en Kommentarfrist: 2018.08.28 ISO 7010:2011/DAmd 243 Safety sign E030: Emergency exit for people unable to walk or with walking impairment (right) Språk: en Kommentarfrist: 2018.09.07 Listenummer: 17/2018 Side: 2 av 127 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 2710-2 Reciprocating -
Technical Report
TECHNICAL REPORT SEMICOLON : STATE OF THE ART REPORT NO 2008-0996 DET NORSKE VERITAS DET NORSKE VERITAS TECHNICAL REPORT Date of first issue: Project No: DET NORSKE VERITAS AS 1. December 2008 Approved by: Organisational unit: 1322 Høvik Jon Ølnes Norway Principal Engineer Tel: Client: Client ref.: Fax: http://www.dnv.com NO 945 748 931 MVA Summary: Report No: Subject Group: 2008-0996 Indexing terms Report title: Keywords Service Area Semicolon: State Of The Art Market Sector Work carried out by: Terje Grimstad, Per Myrseth, Henrik Smith- Unrestricted distribution (internal and external) Meyer, Lasse Udjus, Hans Solli-Sæther, Dag Belsnes, Tore Christiansen, Riitta Hellman, Birger Unrestricted distribution within DNV Møller-Pedersen, Audun Stolpe, Arild Waaler, Jim Yang. Limited distribution within DNV after 3 years Work verified by: No distribution (confidential) Date of this revision: Revision No: Number of pages: <rev> 143 © 2002 Det Norske Veritas AS All rights reserved. This publication or parts thereof may not be reproduced or transmitted in any form or by any means, including photocopying or recording, without the prior written consent of Det Norske Veritas AS. Semicolon_SOTA_v1.0 DET NORSKE VERITAS Report No: 2008-0996 TECHNICAL REPORT Table of Contents Page 1 EXECUTIVE SUMMARY.............................................................................................................3 2 INTRODUCTION..........................................................................................................................3 2.1 Norwegian -
(PSI) Project Overview 2009
Private Sector Investment programme (PSI) Project overview 2009 Colophon Contact Private Sector Investment programme (PSI) T +31 88 602 80 32 F +31 88 602 90 26 [email protected] NL EVD International Juliana van Stolberglaan 148 | 2595 CL The Hague PO Box 20105 | 2500 EC The Hague The Netherlands Index Africa 11 Benin 13 PSI09/BJ/21 Bridging the digital gap in rural Benin 13 Burkina Faso 17 PSI09/BF/01 La Générale Poisson (LGP) 17 PSI09/BF/02 Small scale biodiesel production in Leo, Burkina Faso 20 PSI09/BF/03 MaxiGrana: a collaborative innovation for a value added sesame seeds production chain in Burkina Faso 24 PSI09/BF/21 Cashew nut kernels cracking plant in Burkina Faso 27 PSI09/BF/22 Burkina Primeur, sustainable production of onions and shallots for the West African market 31 Burundi (PSI Plus) 35 PSIP09/BI/31 Introducing modular construction for high quality, affordable housing in Burundi 35 Cape Verde 38 PSI09/CV/02 Shrimp farming on the Cape Verde Island São Vicente 38 PSI09/CV/22 An innovative and ISO 9001 certified manufacturing facility for high quality, aluminium fenestrations in Cape Verde 40 PSI09/CV/23 Safe and reliable transport services for Cape Verde 43 PSI09/CV/24 Tilapia juveniles for tuna live bait on Cape Verde 47 Egypt 50 PSI09/EG/04 Quality controlled logistics & distribution of high quality fresh vegetables & fruits for the domestic urban market in Egypt 50 PSI09/EG/21 MABA Retail: joint venture for the retail-packing and distribution of ware potatoes in Egypt 53 PSI09/EG/22 Growing Radish in the Egyptian -
International Standard Iso 21001:2018(E)
Nofurtherreproductionordistributionispermitted. Copyrighted materiallicensedtoUniversityofTorontobyClarivateAnalytics(US)LLC,subscriptions.techstreet.com,downloadedon2019-06-2910:39:39+0000User. INTERNATIONAL ISO STANDARD 21001 First edition 2018-05 Educational organizations — Management systems for educational organizations — Requirements with guidance for use Organismes d'éducation/formation — Systèmes de management des organismes d'éducation/formation — Exigences et recommandations pour leur application Reference number ISO 21001:2018(E) © ISO 2018 Nofurtherreproductionordistributionispermitted. Copyrighted materiallicensedtoUniversityofTorontobyClarivateAnalytics(US)LLC,subscriptions.techstreet.com,downloadedon2019-06-2910:39:39+0000User. ISO 21001:2018(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2018 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office CP 401 • Ch. de Blandonnet 8 CH-1214 Vernier, Geneva Phone: +41 22 749 01 11 Fax:Website: +41 22www.iso.org 749 09 47 Email: [email protected] iiPublished in Switzerland © ISO 2018 – All rights reserved Nofurtherreproductionordistributionispermitted. Copyrighted materiallicensedtoUniversityofTorontobyClarivateAnalytics(US)LLC,subscriptions.techstreet.com,downloadedon2019-06-2910:39:39+0000User. -
ISO Aprilie.Xlsx
Nr. Standard reference Title Information technology -- Telecommunications and information ISO/IEC/IEEE 8802- exchange between systems -- Local and metropolitan area 1 A:2015/Amd 1:2018 networks -- Part A: Overview and architecture -- Amendment 1: Allocation of Uniform Resource Name (URN) values in IEEE 802® Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area 2 ISO/IEC/IEEE 8802-21:2018 networks -- Specific requirements -- Part 21: Media independent services framework Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area 3 ISO/IEC/IEEE 8802-1AC:2018 networks -- Part 1AC: Media access control (MAC) service definition Information technology -- Telecommunications and information 4 ISO/IEC/IEEE 8802-21-1:2018 exchange between systems -- Local and metropolitan area networks -- Part 21-1: Media independent services Systems and software engineering -- Lifecycle profiles for Very 5 ISO/IEC 29110-3-2:2018 Small Entities (VSEs) -- Part 3-2: Conformity certification scheme Software and systems engineering-- Lifecycle profiles for very small entities (VSEs) -- Part 5-1-4: Software engineering: 6 ISO/IEC TR 29110-5-1-4:2018 Management and engineering guidelines: Generic profile group: Advanced profile 7 ISO/IEC TS 19216:2018 Programming Languages -- C++ Extensions for Networking Information technology -- Small computer system interface (SCSI) 8 ISO/IEC 14776-454:2018 -- Part 454: SCSI Primary Commands - 4 (SPC-4) Information