PUBLICATIONS JOURNAL ARTICLES 1. J. Seo et al, “Thermal Diffusion Boron Doping of Single-Crystal Natural Diamond,” J Appl Phys, 119, 2016, 205703. 2. K Zhang, G Gui, P Pathak, J Seo, J Blanchard, and Z. Ma, “Quantitative Modeling of Betavoltaic Microbattery Performance,” Sensors and Actuators, 240, 2016, 131. 3. G Gui, K Zhang, JP Blanchard, and Z Ma, “Prediction of 4H–SiC betavoltaic microbattery characteristics based on practical Ni-63 sources,” Appl. Rad. and Isotopes, 107, 2016, 272. 4. HH Toudeshki et al, “ARIES ACT-1 Vacuum Vessel Design and Disruption Analysis,” Fus Sci Tech, 68, 2015, 535. 5. CE Kessel et al, “The Fusion Nuclear Science Facility, the Critical Step in the Pathway to Fusion Energy,” Fus Sci Tech, 68, 2015, 225. 6. CE Kessel, “The ARIES Advanced and Conservative Tokamak Power Plant Study,” Fus Sci Tech, 67, 2015, 1. 7. JP Blanchard and CJ Martin, “Thermomechanical Analysis for an All-Tungsten ARIES Divertor,” Fus Sci Tech, 67, 2015, 158. 8. SJ Zinkle, et al, “Fusion Materials Science and Technology Research Opportunities now and during the ITER Era,” Fus Eng Des, 89, 2014, 1579. 9. CE Kessel, MS Tillack, JP Blanchard, “The Evaluation of the Heat Loading from Steady, Transient and Off-Normal Conditions in ARIES Power Plants,” Fus Sci Tech, 64, 2013, 440. 10. JP Blanchard and CJ Martin, “Fracture and Creep in an All-Tungsten Divertor for ARIES,” Fus Sci Tech, 64, 2013, 435. 11. Hongyi Mi, Solomon Mikael, Darryl Butt, Todd Allen, Kumar Sridharan, James Blanchard, Zhenqiang Ma, "Monitoring the Oxidation of Nuclear Fuel Cladding Using Raman Spectroscopy," J Nuc Mat, 445, 2014, 7. 12. Carstens, T., Corradini, M., Blanchard, J, and Ma. Z., “Gamma Radiation Influence on Thermoelectric Powered Wireless Sensors for Dry-Cask Storage” Electrical and Power Engineering Frontier, v0l. 2, no. 2, pp. 30-36, 2013, 13. Carstens, T., Corradini, M., Blanchard, J., Liu, C., Li, M., Behdad, N., and Ma. Z., “Thermoelectric Powered Wireless Sensors for Dry-Cask Storage” IEEE Transactions on Nuclear Science, vol.60, no. 2, pp. 1072-1079, 2013. 14. Carstens, T., Corradini, M., Blanchard, J., and Ma, Z., “Thermoelectric Powered Wireless Sensors for Spent Fuel Monitoring,” IEEE Transactions on Nuclear Science, Nuclear Science, vol.59, no.4, pp.1408,1413, Aug. 2012 15. TJ Renk, PP Provencio, TJ Tanaka, JP Blanchard, CJ Martin, and TR Knowles, “Survivability of First-Wall Materials in Fusion Devices: An Experimental Study of Material Exposure to Pulsed Energetic Ions,” Fus Sci Tech, 61, 2012, 57. 16. JP Blanchard, CJ Martin, M Tillack, and X. Wang, “Ratcheting Models for Fusion Component Design,” Fus Sci Tech, 60, 2011, 313-317. 17. JD Sethian, et al, “The Science and Technologies for Fusion Energy with Lasers and Direct-Drive Targets,” IEEE Transactions on Plasma Science, 38, 2010, 690. 18. J. Blanchard, Q. Hu, and N. Ghoniem, “A Unified Model for Ion Deposition and Thermomechanical Response in Dry Wall Laser IFE Chambers,” Fus Sci Tech, 56, 2009, 341. 19. A. Aoyama, J. Blanchard, J. Sethian, N. Ghoniem, and S. Sharafat, “Thermo-mechanical Analysis of the Hibachi Foil for the Electra Laser System,” Fus Sci Tech, 56, 2009, 435. 20. R. Yao and J. Blanchard, “A Micro-Insulation Concept for MEMS Applications,” J Heat Trans, 131, 2009, 052401. 21. S. Sharafat, G.R. Odette, and J. Blanchard, “Materials and Design Interface,” J Nuc Mat, 386, 2009, 896. 22. J. Blanchard and R. Raffray, “Laser Fusion Chamber Design,” Fus Sci Tech, 52, 2007, 440. 23. J. Conzen and J. Blanchard, “An Upper Bound for Stress Waves Induced By Volumetric Heating In IFE Chamber Walls,” Fus Sci Tech, 52, 2007, 506. 24. A Nosek, J Conzen, H Doescher, C Martin, and J Blanchard, “Thermomechanics of Candidate Coatings for Advanced Gas Reactor Fuels,” J Nuc Mat, 371, 2007, 288. 25. A. R. Raffray, et al, "Progress Towards Realization of a Laser IFE Solid Wall Chamber," Fus Eng Des, 81, 2006, 1627. 26. A. R. Raffray, J Blanchard, AE Robson, et al., “Impact of magnetic diversion on laser IFE reactor design and performance,” Journal De Physique IV, 133, 2006, 845. 27. John D. Sethian et al, “An overview of the development of the first wall and other principal components of a laser fusion power plant,” J Nuc Mat, 347 (3), 2005, 161-177. 28. A. Rene Raffray, “Threats, design limits and design windows for laser IFE dry wall chambers,” J Nuc Mat, 347 (3), 2005, 178-191. 29. James P. Blanchard and Carl J. Martin, “Thermomechanical effects in a laser IFE first wall,” J Nuc Mat, 347 (3), 2005, 192-206. 30. Shahram Sharafat et al, “Micro-engineered first wall tungsten armor for high average power laser fusion energy systems,” J Nuc Mat, 347 (3), 2005, 217-243. 31. J. Pfotenhauer, J. Blanchard, and C. Martin, “Eddy current heating in micro-SMES bus- bars,” IEEE Transactions on Applied Superconductivity, 15, (2), 2005, 1939. 32. Timothy J. Renk, Anatoli Shlapakovski, Robert R. Peterson, James P. Blanchard and Carl Martin, “Miniconference on use of ion beams for surface modification, new materials synthesis, and materials response,” Physics of Plasmas, 12, 2005, 058302. 33. J. Blanchard and Carl Martin, “Development of a Dry Wall Concept for Laser IFE Chambers,” Fusion Science and Technology, 47 (3), 2005, 585. 34. D. Williamson and J. Blanchard, “Wire Debris Modeling of the Z Accelerator,” Fusion Science and Technology, 47 (4), 2005, 936. 35. Amit Lal and Jake Blanchard, “The Daintiest Dynamos,” IEEE Spectrum, September 2004, 36. 36. S. Baik, J. Blanchard, and M. Corradini, “Development of Micro-Diesel Injector Nozzles Via Mems Technology and Effects On Spray Characteristics,” Atomiz. & Sprays, 13 (5&6), 2003. 37. J. Blanchard, "Practical Considerations for Thermal Stresses Induced by Surface Heating," Fus Sci Tech., 44 (1), 2003, 101. 38. D. Williamson, R. Peterson, and J. Blanchard, "Isentropic Compression Experiment On Aluminum Using the Z-Accelerator," Fus Sci Tech., 44 (1), 2003, 169. 39. J. Blanchard, "Elastic Waves Induced by Surface Heating in a Half-Space," J. Appl. Mech., 70 (4), 2003, 613. 40. S. Baik, J. Blanchard, and M. Corradini, “Development of Micro-Diverging Nozzles via LIGA Technology for Diesel Injection Systems,” J Eng Gas Turb Power, 125 (2), Apr 2003, 427. 41. J. Blanchard, "Stretching the Boundaries of Nuclear Technology," The Bridge, 32 (4), 2002, 27. 42. H. Li, A. Lal, J. Blanchard, and D. Henderson, "Self-reciprocating Radioisotope- powered Cantilever," J. Appl. Phys., 92, 2002, 1122. 43. S. Baik, J. Blanchard, M. Corradini, “Development of Micro-Diesel Nozzles via MEMS Technology and Effects on High-Pressure Spray Characteristics,” SAE-2001-01-0528, SAE International Congress, Detroit, MI, 2001. 44. J. Crowell and J. Blanchard, "Electromagnetic Disruption Effects in the ARIES-RS Tokamak Design," Fus Tech, 39 (2), Mar 2001, 434. 45. S. Baik, KH Goney, S. Kang, J. Murphy, J. Blanchard, M.L.Corradini, “Development of Micro-Diesel Injector Nozzles via MEMS Technology and Initial Results for Diesel Sprays,” SAE Fuels & Lubricant Mtg., SAE99-01-3645, Toronto, Canada, 1999. 46. J. P. Blanchard, Using Spreadsheets to Teach Engineering Problem Solving: Differential and Integral Equations, Comp. Ed., VIII (3), 1998, 6. 47. Najmabadi et al, Overview of the ARIES-RS Reversed-Shear Tokamak Power Plant Study, Fus. Eng. Des., 38, 1997, 3. 48. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, J. P. Blanchard, and M. A. El- Gammal, Compression Response of Fiber Reinforced Composite Tubes, Adv. Comp. Mat., 5, 1996, 255. 49. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, and J. P. Blanchard, Acoustic Emission Response of E-Glass/Polyester Woven Roving Composite, Alexandria Engineering Journal, 35, 1996, 79. 50. W. Yu and J. Blanchard, Analytical Models for Hardness, J. Mat. Res., 11, 1996, 1. 51. S. Bilbao y Leon, R. Ulfig, and J. Blanchard, Teaching the Numerical Solution of Ordinary Differential Equations Using Excel 5.0, Comp. Apps. Eng. Ed., 4, 1996, 117. 52. C. P. Munson et al, Recent Advances in Plasma Source Ion Implantation, Surf. Coat. Eng., 84, 1995, 528. 53. Y.T. Cheng, B. Qiu, S. Tung, J. Blanchard, and G. Drew, Practical and Fundamental Studies of Nanocrystalline Composite Thin Films, Proc. 1994 Fall Meeting of MRS, Thin Films: Stresses and Mechanical Properties, MRS Symposium Proceedings, 356, 1995, 875. 54. J. Crowell, J. P. Blanchard, and the PULSAR Team, Fatigue Life of the Plasma-Facing Components in PULSAR, Nuc. Eng. Des./Fusion., 27, 1995, 515. 55. G.T. Sager, et al, Using the Shield for Thermal Energy Storage in PULSAR, Fus. Eng. Des., 29, 1995, 43. 56. J.P. Blanchard, Target Temperature Prediction for Plasma Source Ion Implantation, J. Vac. Sci. B, 12(2), 1994, 910. 57. J.P. Blanchard, Finite Element Simulation of the Hardness Testing of Ion-Implanted Materials, J. Appl. Mech., 61, 1994, 480. 58. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, and J. P. Blanchard, M. El-Gammal, Design Optimization of Fiber-Reinforced Laminate Composites, Alexandria Engineering Journal, 33, 1994, 205. 59. J.P. Blanchard, A. Chen, and B. Qiu, The Relationship Between Depth Profiles of Nitrogen Concentration, Hardness, and Wear Rate in Ion-Implanted Ti-6Al-4V, Nuc. Inst. Meth. B, 82, 1993, 63. 60. Chen, et al, A Study of the Relationship Between Wear Rate and Nitrogen Concentration Profile and Application to Plasma Source Ion Implanted Ti-6Al-4V Alloy, Wear, 165, 1993, 97. 61. Chen, J.P. Blanchard, and J.R. Conrad, Wear Improvement Evaluation of Non- Homogeneous, Surface-Modified Materials, Wear, 160, 1993, 105. 62. F. Najmabadi, et al, Introduction and Synopsis of the Titan Reversed-Field-Pinch Fusion- Reactor Study, Fus. Eng. Des., 23, 1993, 1. 63. F. Najmabadi et al, The Titan-I Reversed-Field-Pinch Fusion-Power-Core Design, Fus. Eng. Des., 23, 1993, 81 64. Sharafat, et al, Materials Analysis of the Titan-I Reversed-Field-Pinch Fusion Power Core, Fus. Eng. Des., 23, 1993, 99. 65. M. Hasan, et al, Thermal-Hydraulic and Structural Design of the Titan-I Reversed-Field- Pinch Fusion Power Core, Fus. Eng. Des., 23, 1993. 66. Wong et al, Safety Design and Radioactive-Waste-Disposal Analysis for The Titan-I Reversed-Field-Pinch Reactor Design, Fus. Eng. Des., 23, 1993, 133. 67. Wong et al, The Titan-II Reversed-Field-Pinch Fusion-Power-Core Design, Fus. Eng. Des., 23, 1993, 173. 68. S. Sharafat, et al, Materials Selection Criteria and Performance Analysis for The Titan-Ii Reversed-Field-Pinch Fusion Power Core, Fus. Eng. Des., 23, 1993, 201. 69. K. El-Awadly and J. P. Blanchard, Three-Dimensional Analysis of a SiC/SiC Composite Fusion Component, Fusion Tech., 24, 1992, 417. 70. Chen, et al, A Study of Nitrogen Ion Implanted Ti-6Al-4V ELI by Plasma Source Ion Implantation at High Temperature, J. Mat. Eng. Perf., 1, 1992, 845. 71. M.H. Hassan, J.P. Blanchard, and G.L. Kulcinski, Irradiation Behavior of bonded structures: Impact of swelling-creep-stress relationship, Fusion Technology, 21, 1992, 1927. 72. G.L Kulcinski, J.P. Blanchard, et al., Safety and Environmental Characteristics of Recent D-3He and DT Tokamak Power Reactors, Fusion Technology, 21, 1992, 1779. 73. J. Chen, J. Blanchard, J.R. Conrad, and R.A. Dodd, Structure and Wear Properties of Carbon Implanted 304 Stainless Steel Using Plasma Source Ion Implantation, Surf. Coat. Tech., 53, 1992, 267. 74. G.L. Kulcinski, et al, Summary of Apollo, a D-3He Tokamak Reactor Design, Fusion Tech., 21, 1992, 2292. 75. Chen, et al, Wear Behavior of Surgical Ti-6Al-4V Alloy by Plasma Source Ion Implantation, Wear of Materials, 1991, 667. 76. I.N. Sviatoslavsky, J.P. Blanchard, Y. Gohar, and S. Majumdar, Mechanical Design and Fabrication of the U.S. Solid Breeder Blanket for ITER, Fusion Tech., 19, 1991, 1552. 77. Y. Gohar, et al, U.S. Solid Breeder Blanket Design for ITER, Fusion Technology, 19, 1991, 1538. 78. J.P. Blanchard and R.F. Mattas, The Effect of Sputtering on Stress Distributions in Plasma-Facing Components, Fusion Technology, 19, 1991, 1736. 79. Chen, et al, Wear Modeling for Nitrogen-Implanted Ti-6Al-4V, J. Mat. Eng, 12, 1990, 299. 80. J.P. Blanchard and N.M. Ghoniem, Analysis of Singular Stress Fields in Duplex Fusion Components, J. Nuc. Mat., 172, 1990, 54. 81. I.N. Sviatoslavsky et al, US Aqueous Salt Blanket for ITER, Fus. Eng. Des, 13, 1990, 33. 82. G.L. Kulcinski, G.A. Emmert, J.P. Blanchard, et al, Apollo -- An Advanced Fuel Fusion Power Reactor for the 21st Century, Fusion Tech., 15 (2), 1989, 1233. 83. J.P. Blanchard and N.M. Ghoniem, An Eigenfunction Approach to Singular Thermal Stresses in Bonded Strips, J. Thermal Stresses, 12 (4), 1989, 501. 84. J.P. Blanchard and N.M. Ghoniem, Relaxation of Thermal Stress Singularities in Bonded Viscoelastic Quarter Planes, J. Appl. Mech., 56 (4), (1989), 756. (Presented at the ASME Winter Conference, San Francisco, CA, Dec. 10-15, 1989.) 85. P.I.H. Cooke, et al, Engineering Design of the TITAN-II Divertor, Nuc. Eng. Des./Fusion, 9, 1989, 417. 86. C.P.C. Wong, et al, The Safety Designs for the TITAN Reversed-Field Pinch Reactor Study, Nuc. Eng. Des./Fusion, 9, 1989, 447. 87. S.P. Grotz, et al, Overview Of The Titan-I Fusion-Power Core, Fus. Eng. Des., 9, 1989, 367. 88. M.Z. Hasan, J.P. Blanchard, and N.M. Ghoniem, Thermal-Hydraulic and Structural Design for the Lithium-Cooled TITAN-I Reversed-Field-Pinch Reactor, Nuc. Eng. Des./Fusion, 9, 1989, 431. 89. J. Blanchard, N. Ghoniem, and S. Chou, An Approximate Solution to the Scattering Integral for General Interatomic Potentials, J. Appl. Phys., 61 (8), (1987), 3120. 90. R. Mattas, M. Baskes, J. Brooks, J. Blanchard, A. Hassanein, and A. Tobin, Divertor Studies for the International Tokamak Reactor, Fusion Tech., 10, (1986), 298. 91. J. Blanchard and N. Ghoniem, The Bowing of Solid Breeder Rods in a Pin-Type Fusion Reactor, Fusion Tech., 10, (1986), 1623. (Presented at the 7th Topical Meeting on the Technology of Fusion Energy, Reno, NV, 1986.) 92. J. Blanchard and R. Watson, Residual Stresses in Bonded Armor Tiles for In-Vessel Fusion Components, Nuc. Eng. Des./Fusion, 4, (1986), 61. (Presented at the 8th SMIRT Conference, Brussels, Belgium, August, 1985.) 93. J. Blanchard and N. Ghoniem, The Influence of Uncertainties in Material Properties and the Effects of Dimensional Scaling on the Prediction of Fusion Structure Lifetimes, Nuc. Eng. Des./Fusion, 4, (1986), 67. (Presented at the 8th SMIRT Conference, Brussels, Belgium, August, 1985.) 94. J. Garner, J. Blanchard, G. Orient, and K. Taghavi, A Module for Testing a Lithium- Cooled Tokamak Blanket in a Tandem Mirror Test Reactor, Fusion Tech., 8, (1985), 962. 95. P. Gierszewski, et al, Engineering Scaling and Quantification of the Test Requirements for Fusion Nuclear Technology, Fusion Tech., 8, (1985), 1100. 96. J. Blanchard and N. Ghoniem, Inelastic Structural Analysis of the MARS Tandem Mirror Reactor, Nuc. Eng. Des./Fusion, 2, (1985), 19. (Presented at the 7th SMIRT Conference, Chicago, IL, August, 1983.) 97. J. Blanchard and N. Ghoniem, The Influence of Irradiation and Thermal Creep on Stress Redistribution in Fusion Blankets, J. Nuc. Mat., 122, (1984), 101. (Presented at the 3rd Topical Meeting on Fusion Reactor Materials, Albuquerque, NM, 1983.) 98. Ghoniem, K. Taghavi, J. Blanchard, and S. Grotz, Limits on Transient Power Variation During Startup and Shutdown of Li-Pb Cooled TMR Blankets, Nuc. Tech./Fusion, 4, (1983), 769.

CONFERENCE PROCEEDINGS 1. Hang Guol, Hui Le, Amit Lal, and James Blanchard, “Nuclear Microbatteries for Micro and Nano Devices,” 9th International Conference on Solid-State and Integrated-Circuit Technology, Beijing, 2008. 2. T. Carstens, M. Corradini, and J. Blanchard, “Diesel Sprays Through Multi-Hole Micro- Nozzles: MEMS-Based Fabrication Process Improvements,” ILASS-2007, Chicago. 3. A. Raffray et al, “Impact of magnetic diversion on laser IFE reactor design and performance,” presented at IFSA 2005. 4. P. Ravi, M. Corradini, and J. Blanchard, “Diesel Sprays Through Multi-Hole Micro- Nozzles: Spray Dynamics and Structure,” ICLASS, 2006, Kyoto. 5. G. Moses et al, “Effective Teaching with Technology,” 36th Frontiers in Education Conference, 2006, San Diego. 6. P. Ravi, M. Corradini, and J. Blanchard, “Diesel Sprays Through Multi-hole Micro- Nozzles: Spray Dynamics and Structure,” ILASS-Americas 2006. 7. Park, Ma, and Blanchard, “Boron-Doped Diamond Schottky Diodes for Temperature Sensing”, MRS: Materials in Extreme Environments, 2006, San Francisco. 8. S. Sharafat, N. Ghoniem, J. El-Awady, S. Liu, R. Odette, T. Yamamoto, J. Blanchard, E. Diegele, and S. Zinkle, “Large-Scale Finite Element Modeling of the Thermo- Mechanical Behavior of the Dual Coolant US-ITER TBM Incorporating Damage Evolution,” ICFRM 12, Santa Barbara, December 2005. 9. R. Yao and J. Blanchard, “Microinsulation for a thermionic microbattery,” PowerMEMS 2005, Tokyo, November 2005. 10. A. Zillmer, J. Santarius, and J. Blanchard, "Coupled MEMS Nuclear Battery and FEEP Thruster System," AIP Conference Proceedings Vol 699 (1), 2004, 256. 11. Prashanth Ravi, Jake Blanchard, Mike Corradini, Diesel Spray Behavior with 3- Dimensional Micro-Nozzles, ICLASS 2003. 12. J. Blanchard, H. Li, and A. Lal, Modeling of a Self-Oscillating Cantilever, Proc. SEM Annual Conference, Milwaukee, June, 2002. 13. J.P. Blanchard, D.L. Henderson, A. Lal, H. Li, H. Guo, R. Yao, and S. Santanam, Radioisotope Power for MEMS Devices, Proc. ANS National Conference, Hollywood, FL, June, 2002. 14. J. Blanchard, A. Lal, R. M. Bilbao Y León, D. Henderson, Radioisotope Power Sources for Mems Devices, Proc. ANS National Conference, Milwaukee, June 2001. 15. H. Li, A. Lal, J. Blanchard and D. Henderson, A Self-Reciprocating Radioisotope Powered Cantilever, Proc. 11th International Conference on Solid-State Sensors and Actuators, Munich, June 2001. 16. Lal, R. M. Bilbao Y León, H. Guo, H. Li, S. Santanam, R. Yao, J. Blanchard, D. Henderson, A Nuclear Microbattery for MEMS Devices, Proc. 9th International Conference on Nuclear Engineering, Nice, April, 2001. 17. S. Baik, S. Kang, J. Blanchard, and M. Corradini, Development of Micro-Diesel Injector Nozzles via MEMS Technology and Effects on Spray Characteristics, 8th International Conference on Nuclear Engineering, ICONE-8142, April 2000. 18. S. Baik, S. Kang, J. Blanchard, and M. Corradini, Development of Micro-Diesel Injector Nozzles via MEMS Technology and Effects on Spray Characteristics, 8th International Conference on Liquid Atomization and Spray Systems, Pasadena, July 2000. 19. J. Blanchard, Using Spreadsheets to Teach Engineering Problem Solving: Differential and Integral Equations, ASEE, Milwaukee, 1997. 20. D. Sze, et al, The ARIES-RS Power Core - Recent Development in Li/V Designs, Fus Eng Des, 41, Sep. 1998, 371-376. 21. J. R. Conrad, et al, Review of the World Wide Status of the Development and Implementation of Plasma Source Ion Implantation, Proc. 1996 MRS-J Conf. and 3rd Ion Eng. Conf., Chiba, Japan. 22. B. Qiu, Y. T. Cheng, and J. P. Blanchard, Hardness of Thin Films of Nanocrystalline Silver and Nickel Composites Studied by Nanoindentation and Finite Flement Analysis, MRS Proc., Metastable Phases and Microstructures, 400, 1996, 305. 23. J.P. Blanchard, B. Qiu, J. Crowell, and W. Yu, Finite Element Simulation of Hardness Testing, Proc. 1996 NSF Design and Manufacturing Grantees Conference, Albuquerque, NM. 24. K. Sridharan, et al, Plasma Source Ion Implantation -- Science and Technology, Proc. ASM-TMS meeting, Cleveland, 1995. 25. M. W. Kissick, et al, Comprehensive Modeling of Plasma Source Ion Implantation, Proc. SAMPE, Albuquerque, 1995. 26. J. Conrad, J. Blanchard, et al, Plasma source ion implantation: history, successes, failures, challenges, and future prospects, IEEE Conference Record – Abstracts, 1995 IEEE International Conference on Plasma Science, 308, 1995, 262. 27. M. Kissick, J. Blanchard, et al, Comprehensive modeling of plasma source ion implantation, IEEE Conference Record – Abstracts, 1995 IEEE International Conference on Plasma Science, 308, 1995, 203. 28. M. Kissick, J. Blanchard, et al., Comprehensive modeling of plasma source ion implantation, 27th International SAMPE Technical Conference, Diversity into the Next Century, 27, 1995, 11. 29. J.T. Scheuer, K.C. Walter, J.P. Blanchard, D.J. Rej, and M. Nastasi, Plasma Source Ion Implantation of Ammonia into Electroplated Chromium, Proc. TMS Annual Meeting, Las Vegas, 1995. 30. Chen, et al, A Study of Nitrogen Ion Implanted Ti-6Al-4V ELI by Plasma Source Ion Implantation at High Temperatures, Proc. Materials Week, October 1991, Cincinnati. 31. Chen, et al, Wear Resistance and Depth Profile Correlation of Plasma Source Ion Implanted Ti-6Al-4V Alloy, Proc. Materials Week, October 1991, Cincinnati. 32. I.N. Sviatoslavsky, J.P. Blanchard, and E.A. Mogahed, Thermo-Mechanical Design and Structural Analysis of the First Wall for ARIES-III, a 1000 MWe D-3He Power Reactor, Proc. 14th IEEE/NPSS Symposium on Fusion Engineering, San Diego, September 1991. 33. G.A. Emmert, et al, An Improved First Stability Advanced Fuel Tokamak: Apollo-L3, Proc. 14th IEEE/NPSS Symposium on Fusion Engineering, San Diego, September 1991. 34. M.E. Sawan, et al, Organic Cooled First Wall and Shield Design for the ARIES-III D- 3He Reactor, Proc. 14th IEEE/NPSS Symposium on Fusion Engineering, San Diego, September 1991. 35. I.N. Sviatoslavsky, J.P. Blanchard, Y. Gohar, and S. Majumdar, Mechanical Design and Fabrication of the U.S. Solid Breeder Blanket for ITER, Proc. 9th Topical Meeting on the Technology of Fusion Energy, Chicago, October 1990. 36. G.L. Kulcinski, et al., Apollo-L3, An Advanced Fuel Fusion Power Reactor Utilizing Direct and Thermal Energy Conversion, Proc. 9th Topical Meeting on the Technology of Fusion Energy, Chicago, October 1990. 37. Y. Gohar, et al., U.S. Solid Breeder Blanket Design for ITER, Proc. 9th Topical Meeting on the Technology of Fusion Energy, Chicago, October 1990. 38. G. A. Emmert, et al, Apollo-L2, An Advanced Fuel Tokamak Reactor Utilizing Direct Conversion, Proc. 13th Symp. Fusion Eng., Knoxville, October 1989. 39. M. E. Sawan, et al, An Aqueous Lithium Salt Blanket for ITER, Proc. 13th Symp. Fusion Eng., Knoxville, October, 1989. 40. J. F. Santarius, et al, Energy Conversion Options for ARIES-III - A Conceptual D-3He Tokamak Reactor, Proc. 13th Symp. Fusion Eng., Knoxville, October, 1989. 41. M. Z. Hasan, J.P. Blanchard and N.M. Ghoniem, Thermal-Hydraulic and Structural Design for the Lithium-Cooled TITAN-I Reversed-Field-Pinch Reactor, Proc. Int. Symp. Fusion Nuc. Tech., Tokyo, April, 1988. 42. P.I.H. Cooke, C. Bathke, J.P. Blanchard, et al, Divertor Design for the TITAN Reversed- Field-Pinch Reactor, Proc. IEEE 12th Symp. Fusion Eng., Monterey, October, 1987. 43. G.E. Orient, J.P. Blanchard, and N.M. Ghoniem, Thermostructural Design of the First Wall/Blanket for the TITAN-RFP Fusion Reactor, Proc. 9th SMIRT Conference, Lausanne, August, 1987, 169.

BOOK REVIEWS 1. J.P. Blanchard, Aging and Life Extension of Major Light Water Reactor Components, Nuc. Tech., 109, 1995, 163.

PRESENTATIONS (not otherwise published) 1. J. Blanchard, "WITCH: An Axisymmetric Finite Element Code for Simulating Indentation Experiments," USNCCM, San Francisco, 1997. 2. M. Redmond, et al, Technology Leadership in the Engineering Classroom, ASEE National Meeting, Washington D.C., June 1996.

BOOK CHAPTERS 1. JP Blanchard and CJ Martin, “Thermal Stresses in Solid-Wall Laser IFE Chambers,” chapter in Encyclopedia of Thermal Stresses, RB Hetnarski, ed., Springer, 2014.

REPORTS 1. F. Najmabadi, et al., ARIES-III--Final Report, UCLA report, to be published. 2. F. Najmabadi, et al., The Starlite Study: Assessment of Options of Tokamak Power Plants, UCSD-ENG-005, 1997. 3. F. Najmabadi, et al., Stellarator Power Plant Study, UCSD-ENG-004, 1997. 4. F. Najmabadi, et al., The TITAN Reversed-Field Pinch Fusion Reactor Study--Final Report, UCLA PPG-1100, 1987. 5. F. Najmabadi, et al., The TITAN Reversed-Field Pinch Fusion Reactor Study--Scoping Phase Report, UCLA-PPG-1100, (Jan. 1987). 6. R. Conn et al., TOKOPS: The Influence of Reactor Operation on the Design and Performance of Tokamaks with Solid Breeder Blankets, UCLA-PPG-1009, (Sept. 1986). 7. R. Mattas et al., U.S. Contribution: INTOR Critical Issue A, Impurity Control and First Wall Engineering, ETR-INTOR/ICE/8, (Oct. 1984). 8. M. Abdou et al., Finesse: A Study of the Issues, Experiments and Facilities for Fusion Nuclear Technology Research and Development, UCLA-PPG-821, (Oct. 1984). 9. R. Conn et al., START/TM: A Study of Start-Up and Fractional Power Operation of Tandem Mirror Fusion Reactors, UCLA-PPG-764, (Jan. 1984).