PUBLICATIONS JOURNAL ARTICLES 1. J. Seo et al, “Thermal Diffusion Boron Doping of Single-Crystal Natural Diamond,” J Appl Phys, 119, 2016, 205703. 2. K Zhang, G Gui, P Pathak, J Seo, J Blanchard, and Z. Ma, “Quantitative Modeling of Betavoltaic Microbattery Performance,” Sensors and Actuators, 240, 2016, 131. 3. G Gui, K Zhang, JP Blanchard, and Z Ma, “Prediction of 4H–SiC betavoltaic microbattery characteristics based on practical Ni-63 sources,” Appl. Rad. and Isotopes, 107, 2016, 272. 4. HH Toudeshki et al, “ARIES ACT-1 Vacuum Vessel Design and Disruption Analysis,” Fus Sci Tech, 68, 2015, 535. 5. CE Kessel et al, “The Fusion Nuclear Science Facility, the Critical Step in the Pathway to Fusion Energy,” Fus Sci Tech, 68, 2015, 225. 6. CE Kessel, “The ARIES Advanced and Conservative Tokamak Power Plant Study,” Fus Sci Tech, 67, 2015, 1. 7. JP Blanchard and CJ Martin, “Thermomechanical Analysis for an All-Tungsten ARIES Divertor,” Fus Sci Tech, 67, 2015, 158. 8. SJ Zinkle, et al, “Fusion Materials Science and Technology Research Opportunities now and during the ITER Era,” Fus Eng Des, 89, 2014, 1579. 9. CE Kessel, MS Tillack, JP Blanchard, “The Evaluation of the Heat Loading from Steady, Transient and Off-Normal Conditions in ARIES Power Plants,” Fus Sci Tech, 64, 2013, 440. 10. JP Blanchard and CJ Martin, “Fracture and Creep in an All-Tungsten Divertor for ARIES,” Fus Sci Tech, 64, 2013, 435. 11. Hongyi Mi, Solomon Mikael, Darryl Butt, Todd Allen, Kumar Sridharan, James Blanchard, Zhenqiang Ma, "Monitoring the Oxidation of Nuclear Fuel Cladding Using Raman Spectroscopy," J Nuc Mat, 445, 2014, 7. 12. Carstens, T., Corradini, M., Blanchard, J, and Ma. Z., “Gamma Radiation Influence on Thermoelectric Powered Wireless Sensors for Dry-Cask Storage” Electrical and Power Engineering Frontier, v0l. 2, no. 2, pp. 30-36, 2013, 13. Carstens, T., Corradini, M., Blanchard, J., Liu, C., Li, M., Behdad, N., and Ma. Z., “Thermoelectric Powered Wireless Sensors for Dry-Cask Storage” IEEE Transactions on Nuclear Science, vol.60, no. 2, pp. 1072-1079, 2013. 14. Carstens, T., Corradini, M., Blanchard, J., and Ma, Z., “Thermoelectric Powered Wireless Sensors for Spent Fuel Monitoring,” IEEE Transactions on Nuclear Science, Nuclear Science, vol.59, no.4, pp.1408,1413, Aug. 2012 15. TJ Renk, PP Provencio, TJ Tanaka, JP Blanchard, CJ Martin, and TR Knowles, “Survivability of First-Wall Materials in Fusion Devices: An Experimental Study of Material Exposure to Pulsed Energetic Ions,” Fus Sci Tech, 61, 2012, 57. 16. JP Blanchard, CJ Martin, M Tillack, and X. Wang, “Ratcheting Models for Fusion Component Design,” Fus Sci Tech, 60, 2011, 313-317. 17. JD Sethian, et al, “The Science and Technologies for Fusion Energy with Lasers and Direct-Drive Targets,” IEEE Transactions on Plasma Science, 38, 2010, 690. 18. J. Blanchard, Q. Hu, and N. Ghoniem, “A Unified Model for Ion Deposition and Thermomechanical Response in Dry Wall Laser IFE Chambers,” Fus Sci Tech, 56, 2009, 341. 19. A. Aoyama, J. Blanchard, J. Sethian, N. Ghoniem, and S. Sharafat, “Thermo-mechanical Analysis of the Hibachi Foil for the Electra Laser System,” Fus Sci Tech, 56, 2009, 435. 20. R. Yao and J. Blanchard, “A Micro-Insulation Concept for MEMS Applications,” J Heat Trans, 131, 2009, 052401. 21. S. Sharafat, G.R. Odette, and J. Blanchard, “Materials and Design Interface,” J Nuc Mat, 386, 2009, 896. 22. J. Blanchard and R. Raffray, “Laser Fusion Chamber Design,” Fus Sci Tech, 52, 2007, 440. 23. J. Conzen and J. Blanchard, “An Upper Bound for Stress Waves Induced By Volumetric Heating In IFE Chamber Walls,” Fus Sci Tech, 52, 2007, 506. 24. A Nosek, J Conzen, H Doescher, C Martin, and J Blanchard, “Thermomechanics of Candidate Coatings for Advanced Gas Reactor Fuels,” J Nuc Mat, 371, 2007, 288. 25. A. R. Raffray, et al, "Progress Towards Realization of a Laser IFE Solid Wall Chamber," Fus Eng Des, 81, 2006, 1627. 26. A. R. Raffray, J Blanchard, AE Robson, et al., “Impact of magnetic diversion on laser IFE reactor design and performance,” Journal De Physique IV, 133, 2006, 845. 27. John D. Sethian et al, “An overview of the development of the first wall and other principal components of a laser fusion power plant,” J Nuc Mat, 347 (3), 2005, 161-177. 28. A. Rene Raffray, “Threats, design limits and design windows for laser IFE dry wall chambers,” J Nuc Mat, 347 (3), 2005, 178-191. 29. James P. Blanchard and Carl J. Martin, “Thermomechanical effects in a laser IFE first wall,” J Nuc Mat, 347 (3), 2005, 192-206. 30. Shahram Sharafat et al, “Micro-engineered first wall tungsten armor for high average power laser fusion energy systems,” J Nuc Mat, 347 (3), 2005, 217-243. 31. J. Pfotenhauer, J. Blanchard, and C. Martin, “Eddy current heating in micro-SMES bus- bars,” IEEE Transactions on Applied Superconductivity, 15, (2), 2005, 1939. 32. Timothy J. Renk, Anatoli Shlapakovski, Robert R. Peterson, James P. Blanchard and Carl Martin, “Miniconference on use of ion beams for surface modification, new materials synthesis, and materials response,” Physics of Plasmas, 12, 2005, 058302. 33. J. Blanchard and Carl Martin, “Development of a Dry Wall Concept for Laser IFE Chambers,” Fusion Science and Technology, 47 (3), 2005, 585. 34. D. Williamson and J. Blanchard, “Wire Debris Modeling of the Z Accelerator,” Fusion Science and Technology, 47 (4), 2005, 936. 35. Amit Lal and Jake Blanchard, “The Daintiest Dynamos,” IEEE Spectrum, September 2004, 36. 36. S. Baik, J. Blanchard, and M. Corradini, “Development of Micro-Diesel Injector Nozzles Via Mems Technology and Effects On Spray Characteristics,” Atomiz. & Sprays, 13 (5&6), 2003. 37. J. Blanchard, "Practical Considerations for Thermal Stresses Induced by Surface Heating," Fus Sci Tech., 44 (1), 2003, 101. 38. D. Williamson, R. Peterson, and J. Blanchard, "Isentropic Compression Experiment On Aluminum Using the Z-Accelerator," Fus Sci Tech., 44 (1), 2003, 169. 39. J. Blanchard, "Elastic Waves Induced by Surface Heating in a Half-Space," J. Appl. Mech., 70 (4), 2003, 613. 40. S. Baik, J. Blanchard, and M. Corradini, “Development of Micro-Diverging Nozzles via LIGA Technology for Diesel Injection Systems,” J Eng Gas Turb Power, 125 (2), Apr 2003, 427. 41. J. Blanchard, "Stretching the Boundaries of Nuclear Technology," The Bridge, 32 (4), 2002, 27. 42. H. Li, A. Lal, J. Blanchard, and D. Henderson, "Self-reciprocating Radioisotope- powered Cantilever," J. Appl. Phys., 92, 2002, 1122. 43. S. Baik, J. Blanchard, M. Corradini, “Development of Micro-Diesel Nozzles via MEMS Technology and Effects on High-Pressure Spray Characteristics,” SAE-2001-01-0528, SAE International Congress, Detroit, MI, 2001. 44. J. Crowell and J. Blanchard, "Electromagnetic Disruption Effects in the ARIES-RS Tokamak Design," Fus Tech, 39 (2), Mar 2001, 434. 45. S. Baik, KH Goney, S. Kang, J. Murphy, J. Blanchard, M.L.Corradini, “Development of Micro-Diesel Injector Nozzles via MEMS Technology and Initial Results for Diesel Sprays,” SAE Fuels & Lubricant Mtg., SAE99-01-3645, Toronto, Canada, 1999. 46. J. P. Blanchard, Using Spreadsheets to Teach Engineering Problem Solving: Differential and Integral Equations, Comp. Ed., VIII (3), 1998, 6. 47. Najmabadi et al, Overview of the ARIES-RS Reversed-Shear Tokamak Power Plant Study, Fus. Eng. Des., 38, 1997, 3. 48. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, J. P. Blanchard, and M. A. El- Gammal, Compression Response of Fiber Reinforced Composite Tubes, Adv. Comp. Mat., 5, 1996, 255. 49. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, and J. P. Blanchard, Acoustic Emission Response of E-Glass/Polyester Woven Roving Composite, Alexandria Engineering Journal, 35, 1996, 79. 50. W. Yu and J. Blanchard, Analytical Models for Hardness, J. Mat. Res., 11, 1996, 1. 51. S. Bilbao y Leon, R. Ulfig, and J. Blanchard, Teaching the Numerical Solution of Ordinary Differential Equations Using Excel 5.0, Comp. Apps. Eng. Ed., 4, 1996, 117. 52. C. P. Munson et al, Recent Advances in Plasma Source Ion Implantation, Surf. Coat. Eng., 84, 1995, 528. 53. Y.T. Cheng, B. Qiu, S. Tung, J. Blanchard, and G. Drew, Practical and Fundamental Studies of Nanocrystalline Composite Thin Films, Proc. 1994 Fall Meeting of MRS, Thin Films: Stresses and Mechanical Properties, MRS Symposium Proceedings, 356, 1995, 875. 54. J. Crowell, J. P. Blanchard, and the PULSAR Team, Fatigue Life of the Plasma-Facing Components in PULSAR, Nuc. Eng. Des./Fusion., 27, 1995, 515. 55. G.T. Sager, et al, Using the Shield for Thermal Energy Storage in PULSAR, Fus. Eng. Des., 29, 1995, 43. 56. J.P. Blanchard, Target Temperature Prediction for Plasma Source Ion Implantation, J. Vac. Sci. B, 12(2), 1994, 910. 57. J.P. Blanchard, Finite Element Simulation of the Hardness Testing of Ion-Implanted Materials, J. Appl. Mech., 61, 1994, 480. 58. K. El-Awadly, E. A. Esmail, M. S. Abdou Elwafa, and J. P. Blanchard, M. El-Gammal, Design Optimization of Fiber-Reinforced Laminate Composites, Alexandria Engineering Journal, 33, 1994, 205. 59. J.P. Blanchard, A. Chen, and B. Qiu, The Relationship Between Depth Profiles of Nitrogen Concentration, Hardness, and Wear Rate in Ion-Implanted Ti-6Al-4V, Nuc. Inst. Meth. B, 82, 1993, 63. 60. Chen, et al, A Study of the Relationship Between Wear Rate and Nitrogen Concentration Profile and Application to Plasma Source Ion Implanted Ti-6Al-4V Alloy, Wear, 165, 1993, 97. 61. Chen, J.P. Blanchard, and J.R. Conrad, Wear Improvement Evaluation of Non- Homogeneous, Surface-Modified Materials, Wear, 160, 1993, 105. 62. F. Najmabadi, et al, Introduction and Synopsis of the Titan Reversed-Field-Pinch Fusion- Reactor Study, Fus. Eng. Des., 23, 1993, 1. 63. F. Najmabadi et al, The Titan-I Reversed-Field-Pinch Fusion-Power-Core Design, Fus.