The Ultimate Clause 942 BBA HAPAS Approved Road Surface Solution

SBN-0118

PAVE

The ultimate Clause 942 BBA HAPAS approved road surface solution

Tarmac Portland House Bickenhill Lane Solihull Birmingham B37 7BQ 0800 1 218 218 [email protected]

The ultimate Clause 942 BBA HAPAS approved road surface solution

ULTIPAVE is a high ULTIMATE LONG TERM DURABILITY ULTIMATE QUALITY TECHNICAL DATA performance asphalt Using high quality high PSV Our third party accredited ISO aggregates, it maintains its surface 9001 Systems and BBA certification suitable for most locations, The table below contains test results showing performance compared to conventional asphalt products. from rural roads to heavily texture and skid resisting properties ensures a consistently high quality trafficked motorways. over prolonged periods, even on product is supplied at all times. Typical Stiffness Typical Water Typical Wheel Tracking heavily trafficked routes. ULTIDRIVE Typical Air Voids Using high grade ULTIPAVE D (ITSM) Sensitivity (ITSR) WTSAIR PRDAIR aggregates it delivers EXCEPTIONAL CONTROL Also available is a 10mm dense version, BS EN 12697-22 Standard BS EN 12697-8 BS EN 12697-26 BS EN 12697-12 outstanding durability Our stringent quality control designed to deliver a lower texture, (Proc. B at 60°C) along with impressive processes, from design to laying, denser formulation than standard 0.18mm/10³ ULTIPAVE 6MM 3.5% 3400MPa 85% 9.6% reductions in road noise ensure exceptional control 10mm ULTIPAVE and resist pavement load cycles over the quality and consistency of deformation and premature wear on 0.16mm/103 and surface spray. ULTIPAVE D 10MM 3.0% 4000MPa 86% 9.2% finished asphalt surfaces. heavily trafficked roundabouts. load cycles 0.19mm/10³ PROVEN PERFORMANCE ULTIPAVE 10MM 4.0% 3400MPa 84% 10.0% ULTIMATE SUPPORT load cycles An exceptional record of At Tarmac, technical excellence 0.16mm/10³ ULTIPAVE 14MM 3.5% 3500MPa 86% 8.8% performance on some of the busiest comes as standard. ULTIFLEX is load cycles motorway routes in the UK. only available for installation by accredited contractors who have ULTIMATE VERSATILITY full access to our expert training, The ULTIPAVE range includes advice and technical support or by 6mm, 10mm and 14mm products our own expert Contracting division. to meet a variety of thickness This ensures it is laid to the highest and texture requirements. industry standards.

To find your local Tarmac office visit: tarmac.com/contact