Specialty Tools

Plumb Bobs Pin Vises Retrieving Tools Tweezers Holding Tools Calipers Micrometers Meters Magnifiers Inspection Mirrors Magnetic Tools Sweepers Magnets Knives Carving Tools Grommets, Fasteners Punches Pliers File Sets Probe Sets Levels SPECIALTY TOOLS Measure ’N Mark/Plumb Bobs The New “Measure ’N Mark” is a pocket pen with a from a cord for determining the vertical or plumb 3 foot removable tape measure. A handy little pen line to a point on the ground. General’s Plumb Bobs tool for those on the go. A Plumb Bob is a pointed, are available in a wide range of sizes and conform to tapered brass or steel weight which is suspended government specifications.

309

POCKET PEN WITH REMOVABLE TAPE MEASURE • 3' (914mm) removable tape measure • Pen with comfort grip • Convenient pocket clip • Great for high-traffic areas like checkout counters and end-cap shelving • Available only as a 15 piece counter display UPC NO. 02126 8 309CD Countertop Display 15 pieces (Sold only as a counter display - see Page T-117 for display)

309CD Patent Pending

BRASS PLUMB BOBS • Machined of solid brass, fully polished and lacquered • Removable self-centering cord cap for easy cord replacement. Cap used with 5/64" (0.078) braided cord • Replaceable hardened steel point • Conforms to government specs GGG-P-501e • Now with extra string and tip 800 • 10' (3mm) long braided cord • Available in six sizes

UPC NO. WEIGHT (A) (B) 42624 6 800-8 8 oz. 4-1/2" (114mm) 1-3/16" (30mm) 42630 7 800-12 12 oz. 5" (127mm) 1-3/8" (35mm) B 42633 8 800-16 16 oz. 5-3/4" (146mm) 1-1/2" (38mm) 42639 0 800-32 32 oz. 7-1/4" (184mm) 1-7/8" (48mm) 42641 3 800NP Replacement Point 10-33 Thread A SPECIALTY

HEXAGON STEEL PLUMB BOBS • Made of hexagonal cold drawn steel and B nickel plated to prevent rust • Removable cord cap for 3/32" (0.094) • 10' (3mm) long braided cord A

UPC NO. WEIGHT (A) (B) 42612 3 790-5 5 oz. 3-3/8" (86mm) 3/4" (19mm) 42615 4 790-8 8 oz. 4" (102mm) 7/8" (22mm) 790 42618 5 790-12 12 oz. 4-1/2" (114mm) 1" (25mm)

ALWAYS WEAR OSHA APPROVED T-80 Toll Free 800-697-8665 • Fax 212-431-6499 • www.generaltools.com SAFETY GOGGLES SPECIALTY TOOLS Pin Vises General’s Pin Vises are useful for securely holding and grip firmly when the screw chuck is tightened. small stock, taps, drills, reamers, scribers, wire, files The Swivel Head Pin Vise is an exceptional tool for and other tools. The tool steel collets are hardened precise work on models, instuments and jewelry.

SINGLE END PIN VISE SET • Nickel plated body is hollow to permit 94A • For holding small rods, wire, drills, taps holding of long rods of wire S94 and other small tools • Available in individual sizes 94B • Tool steel collets are hardened and grip • Conforms to government specfications firmly when screw chuck is tightened GGG-V-412a 94C

UPC NO. RANGE (A) (B) (C) 41068 9 S94 Set of 4 sizes, A-D 94D 41074 0 94A 0 to 0.055" (0 to 1.4mm) 3-1/8" (79mm) 5/16" (8mm) 3/16" (5mm) 41077 1 94B 0.025 to 0.075" (.6 to 1.9mm) 3-1/2" (89mm) 3/8" (10mm) 1/4" (6mm) 41080 1 94C 0.045 to 0.125" (1.1 to 3.2mm) 3-13/16" (97mm) 7/16" (11mm) 1/4" (6mm) B C 41083 2 94D 0.110 to 0.187" (2.8 to 4.8mm) 4" (102mm) 9/16" (14mm) 5/16" (8mm) A

SWIVEL HEAD PIN VISE • An exceptional pin vise for precise work UPC NO. CAPACITY on models, instruments and jewelry 41062 7 92 0.0 to 0.125" • Two double end collets made of hardened 0.0 to 3.2mm tool steel 5/16" (8mm) 3/8" • Has large freewheeling swivel head (10mm) • Collets stored in handle 3-11/16" (94mm) 92

DOUBLE END PIN VISE • Each end has a double end collet which UPC NO. CAPACITY may be reversed to desired size 41058 0 90 0.0 to 0.0125" • Nickel plated body is hollow to permit use 0.0 to 3.2mm of long wire or rods 3/8" (10mm) • Collets stored in handle 7/16" • Holds a variety of small tools for fine detail (11mm) work 90 3-5/8" (92mm)

ADJUSTABLE PIN VISE UPC NO. CAPACITY • Use for electronic assembling, tool-making, 41065 8 93 0.040 to 0.250" 1mm to 6.4mm model making and hobbies • Holds small drills, deburrers, wires, files, 1" reamers and other small tools (25mm) • 3-jaw hardened steel keyless chuck and 93 sturdy plastic handle 5-3/4" (146mm)

SWIVEL VACUUM VISE SPECIALTY • This popular vise grips firmly to glass, metal, • Furnished with slide-on rubber jaws for laminate, fiberglass, or any smooth non- fragile work porous surface with quick lever action • Folds for storage 1850 • Universal ball joint swivels 360° to any BASE OVERALL position and tilts 90° to any angle UPC NO. SIZE HEIGHT WEIGHT • V-grooved hardened steel jaws are 3" wide 43960 4 1850 6-1/4" 6-1/4" 5 lbs. and open to 2-5/8" triangular

ADJUSTABLE FILE/TOOL HANDLE • Conforms to government specifications • For holding files, reamers, hacksaw blades NN-H-0085 and other tang handled tools UPC NO. • Exclusive steel parallel clamping jaws grip 43666 5 890 the entire length of the inserted tang to prevent slipping 1-1/16" • Large, quick adjusting knurled knob ensures (27mm) positive locking 890 • Rustproof handle with steel parts 4-1/8" (105mm)

“It’sYourJob...General Tools Make It Easier” T-81 SPECIALTY T-82 400 396 388 ehnclPick-Ups Mechanical TOOLS SPECIALTY oeflLDlgtsesaba flgto your on light of beam The a places. sheds reach light to LED hard to powerful dark, you from allow items Pick-Ups retrieve Mechanical Lighted new The o lFe 800-697-8665 Free Toll (8mm) 5/16" a eue sasrwstarter screw a as used be rust Can prevent • to finish Chrome • hard-to- for point tapered with body Knurled small • retrieve jaws steel prong four Strong • PICKUP MECHANICAL MINI shaft Flexible • designed ergonomically claw Comfortable retrieval • opens push light Continued LED • Powerful On Push • dark/hard-to-reach from items Retrieve • PICK-UPS MECHANICAL LIGHTED mohatao o rae control greater for actuator Smooth • togfu rn te asrtiv small retrieve jaws steel prong four Strong • PICKUP MECHANICAL P NO. 9 42214 UPC ec okareas work reach (12mm) 1/2" to up objects controls hand places tm rmhr-orahplaces hard-to-reach from items 70393 mohtaeigpugractuator plunger traveling Smooth • o rae control greater for 412 62m Extended (622mm) 24-1/2" • -/"(5m)Closed (159mm) 6-1/4" a 212-431-6499 Fax 388 ereesalies h hf oe n3different 36". 3 and in 24", comes to 12", shaft you lengths, The allows items. jaws small steel retrieve 4-prong strong The subject. 4 (610mm) 24" www.generaltools.com • 70396 ovnetpocket-clip rust Convenient prevent • to finish Chrome (4.30mm) barbeques • .170" and capacity: lights Jaw pilot • lighting for Ideal • CLIP ALLIGATOR TELESCOPING (12mm) P NO. 0 42217 UPC P NO. 6 70399 UPC 60 1 26003 09 4 70393 1/2" P NO. 2 22145 UPC oe ore L4”bteis(included) batteries “LR41” 3 Source: claw Power retrieval • steel spring Strong • lxbesatt vi obstacles avoid to shaft rust Flexible prevent • to finish Chrome • 70393 70396 R1rpaeetbattery replacement LR41 70399 400 396 -/"(114mm) 4-1/2" -/"(114mm) 4-1/2" (7mm) /2 (7mm) 9/32" 9/32" 2 OAL 12" 4 OAL 24" 6 OAL 36" AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS 70399 SPECIALTY 425 8081 8083 8082 T-83 C421 5/16" (8mm) 5/16" (8mm) 5" (127mm) 5" (127mm) 5/16" (8mm) 5-1/8" (130mm) 416 Tweezers SPECIALTY TOOLS Utility tweezers for mechanics, craftspeople and hobbyists 423-3 423-3C places. They can also be used when nuts and screws are too small tothreaded. be held by hand while being 425 8081 8082 8083 General Tools Make It Easier” • Durable plastic handle• and Finely frame ground points • Length 2-1/4" (57mm) • Knurled aluminum handle • Knurled aluminum handle • Knurled aluminum handle 414 415 UPC42258 3 NO. UPC42682 6 NO. UPC42684 0 NO. UTILITY TWEEZERS. 42686 4 UPC NO. Very fineVery fine 4-5/8" 4-1/8" “It’sYourJob... Blunt serrated(self closing) CurvedSpade 6-1/2" 6-1/2" 4-1/2" 423-3C 423-3 C421 415 416 414 screws from No. 3 to 7/16" sizes hard-to-reach areas. Can alsonuts be are used too when smallbeing to threaded be held by hand while hard-to-reach areas. Can alsoscrews be are used too when smallwhile to being be threaded held by hand nut sizes from 3-48(3/32" thread or 2.5mm) to 5/16" (8mm) subminiature assemblies 42251 4 42249 1 UPC NO. POINT STYLE LENGTH in hard-to-reach areas. Can also be used when screws are toohand small while to being be threaded held by from No. 6 to 1/4" size industrial use 415, 417 UPC42309 2 NO. 42294 1 42297 2 42291 0 UPC NO. POINT STYLE LENGTH TWEEZER MAGNIFIER • Useful for detailed• projects 5-power lens • Stainless steel tweezer • Double hinged adjustable arm SLOTTED SCREW STARTER • For starting or removing slotted screws in • Spring loaded steel chuck holds slotted • For starting or removing threaded nuts in • Easy-to-use spring steel chuck will hold NUT STARTER SWISS PATTERN TWEEZERS • Light tension and hardened points for • Stainless steel construction • Finest quality precision points • For starting or removing cross point screws • Easy-to-use spring steel chuck holds screws SIX-PIECE TWEEZER SET • Consists of six tweezers for home• and One each of Nos. 401XX, 403,• 412, In 414, clear vinyl pouch Utility Tweezers are usedpeople by and mechanics, hobbyists crafts- whereNut value Starter is and desired. Screwand The Starters removing are nuts used and for screws starting in hard-to-reach INDIVIDUAL STYLES OF UTILITY TWEEZERS CROSS POINT SCREW STARTER ShedShed Some Some Light Light On On Your Your Subject Subject withwith Lighted Lighted Tweezers Tweezers and and Lighted Lighted Mechanical Mechanical Pick-Up Pick-Up Lighted Tweezers

1 24" Lighted Push On / Push Off Mechanical Pick-up Powerful 1 LED Light 1 1 Push On 2 Powerful 2 Non-Slip LED Light Comfort 2 Grips 3 2 Continued 3 3 Push Opens Retrieval Claw Heat Treated 3 Steel Comfortable Hand Controls 4 4 Corrosion 4 4 Resistant Corrosion Non-Glare Resistant Black Finish Black Finish

5 5 5 FLEXI-SHAFTTM Serrated FLEXI- Lighted SHAFTTM Blunt Tips Mechanical 6.25" (159mm) Pick-Up No. 70403 No. 70393 12" (305 mm) Serrated No. 70396 Bent Tip Pointed Tip Bent Tips 24" (610 mm) No. 70408 No. 70401 6.5" (165mm) No. 70399 No. 70408 36" (914 mm) Smooth 5 Pointed Tip 6.25" (159mm) No. 70401 Blunt Tip No. 70403 Includes 3 “LR41” batteries No. 70400 3 Piece Set 6 70401, 70403, Strong Retrieval 70408 Claw Can Grasp Includes No. 70402 Objects Up To 2 Piece Set 1" (52mm) 3 “LR41” 70401, 70408 batteries

T-84 SPECIALTY 70402 70400 401AA T-85 410 408 Tweezers SPECIALTY TOOLS Smooth Point Tip Serrated Blunt Tip Serrated Bent Tip (2 pc. set) 70401, 70408 (3 pc. set) 70401, 70403, 70408 Strong bevel 5" instrument, radio and otherassembly, servicing small and or repairs. sub-miniature configurations. Available in three tip 70401 70403 70408 70402 70400 401AA General Tools Make It Easier” 403 401XX 26004 8 26005 5 26006 2 70402 3 70400 9 UPC NO. UPC42240 8 NO. POINT STYLE LENGTH General’s quality tweezers for toolmakers, repairmen, electronic assemblers and other professionals For electronic, computer, instrument, radio and other small or subminiature assembly, servicing and repairs Blunt serratedSharp bentNarrow sharp 6" 4-1/4" 4-1/4" Strong sharp 4-1/2" “It’sYourJob... Smooth Point Tip Serrated Blunt Tip 70401 70403 70408 Serrated Bent Tip 410 403 408 401XX Ballistic nylon carrying case 3 “LR41” batteries per tweezer (included) makers, instrument assemblers andpeople crafts- 42280 4 42266 8 42271 2 UPC42263 7 NO. POINT STYLE LENGTH PRECISION TWEEZERS. LIGHTED TWEEZERS Now, put the light• exactly Push where ON/Push you need OFF• it! powerful Non-slip LED comfort light grip • Heat treated steel • Corrosion resistant non-glare• black Tweezers finish are approximately• 6.25" Sets (159mm) come long with heavy-duty • Power Source: INDUSTRIAL TWEEZERS. The new Lighted Tweezersitems allow from you dark, to hard-to-reachLED retrieve places. light The allows powerful youyou to need put it. the Ideal light for exactly electronics, where computer, INDIVIDUAL STYLES OF INDUSTRIAL TWEEZERS BOLEY PATTERN TWEEZER • A fine quality tweezer for jewelers, watch- • For radio, television and other repairs TM

Light Weight Non-Marring Carbon Fiber Construction 3 Mode Digital Display

Inches Metric

Fractions

2 Sizes Now Available 3" (76mm) / 6" (150mm) 3" Fraction+ Caliper Clips into Your Pocket Convenient Auto On/Off Feature

Specifications: Range: No. 146 (6") No. 1433 (3") 0 - 3" (0-76mm) No. 146 (6") 0 - 6" (0 - 150mm) No. 1433 (3") Accuracy: No. 1433 (3") +/- 0.005", +/- 0.1mm No. 146 (6") +/- 0.008", +/- 0.2mm Resolution: 0.0005" From the Hobbyist 0.01mm 1/64" to the Technician and Repeatability: 0.0005" Measuring Everything 0.01mm 1/64" in Between

T-86 SPECIALTY TOOLS Fraction+ Calipers

The Family

6", 8" & 12" STAINLESS STEEL DIGITAL FRACTIONAL CALIPERS 147 • 6" (153mm) range • Heavy-duty stainless steel construction • Convenient auto-off feature • Three mode digital display: Decimal Inches, Fractions, Metric UPC NO. RANGE • Inside, outside, depth & step measurements 01470 2 147 0 - 6" (0 - 153mm) • Accuracy: +/- 0.001", +/- 0.02mm 01478 3 1478 0 - 8" (0 - 203mm) • Resolution: 0.0005", 0.01mm, 1/64" 14712 7 14712 0 - 12" (0 - 305mm) • Power Source: 1 “SR44” (1.5V) battery (included) No. 147 Digital Display

6" CARBON FIBER DIGITAL FRACTIONAL CALIPER • 6" (153mm) range • Lightweight, non-marring carbon fiber 146 composite • Convenient auto-off feature • Three mode digital display: Decimal Inches, Fractions, Metric • Inside, outside, depth & step measurements • Accuracy: +/- 0.008", +/- 0.2mm • Resolution: 0.0005", 0.01mm, 1/64" • Power Source: 1 “SR44” (1.5V) battery (included) UPC NO. RANGE 01460 3 146 0 - 6" (0 - 153mm) SR44 replacement battery No. 146 Digital Display SPECIALTY

3" CARBON FIBER DIGITAL FRACTIONAL CALIPER • 3" (76mm) range 1433 • Lightweight non-marring carbon fiber composite • Convenient auto-off feature • Three mode digital display: Decimal Inches, Fractional and Metric • Convenient pocket clip • Inside, outside, depth & step measurements • Accuracy: +/- 0.005", +/- 0.1mm • Resolution: 0.0005", 0.01mm, 1/64" • Power Source: 1 “SR54” (1.5V) silver oxide battery (included) No. 1433 Digital Display UPC NO. RANGE 01433 7 1433 0 - 3" (0 - 76mm) “It’sYourJob...General Tools Make It Easier” T-87 SPECIALTY T-88 108 107 142 opeewt ntutosadreusable and instructions with Complete • case hang-up plastic reusable in bezel Packed adjustable • with tenths/mm dial in Non-glare graduated • is scale 6" • cuaeygautdda a ietread- direct has dial 0.1mm graduated by Accurately 150mm • to 0 Capacity CALIPER • DIAL METRIC PLASTIC, .100" .001" is Resolution dial • of revolution Single • .001" in REVOLUTION Readings 6" • SINGLE to READING, 0 Capacity THOUSANDTHS • CALIPER, DIAL PLASTIC 6" nie usd,dphadse measure- step and depth outside, Inside, • lsi agu case hang-up plastic 0.1mm metric in ings ments ilCalipers Dial TOOLS SPECIALTY aeo iegasrifre lsi n gives and plastic is reinforced Caliper fiberglass Dial of Plastic and made 6" Depth The Outside, measurements. Inside, Step – readings Calipers precise Dial give easy-to-read quality, high General’s o lFe 800-697-8665 Free Toll ogaees-ora ilwt adjustable with dial easy-to-read No-glare • in graduated is dial coded color Contrasting • uehsece n ild4graduations 4 filled and etched has Rule • 3/4" x 6" Caliper; Dial 6" includes: Set • useful most the of three contains set SET This • MARKING AND CALIPER DIAL and accuracy for construction steel Stainless • CALIPER DIAL 6" CALIPER DIAL READING DIRECT PLASTIC, 6" oee akesrssot prto by operation smooth ensures rack Covered • etched clearly with scale chrome Satin • bezel bar on mm and inch scale with 64ths and .01" 18,11" /2,1/64") 1/32", 1/16", (1/8", magnetic with pick-up Scriber and Carbide finish Tip satin reversible with Rule Steel Stainless mechanics machinists for and tools marking and measuring durability rvnigdr n hp rmetrn rack mechanism entering gear from and chips and dirt preventing graduations inch of tenths P NO. 5 44148 UPC NO. 8 44150 UPC nie usd,dphadstep and depth outside, Inside, • reheigfito olrfor roller friction Freewheeling • reheigfito olrfor roller friction Freewheeling • esrn aaiy0t 6" to 0 capacity Measuring • gives plastic reinforced Fiberglass • eeiieadacrt readings accurate and repetitive measurements eeiieadacrt readings accurate and repetitive • cnmclprice economical an at measurements precision a 212-431-6499 Fax ag,cerda accurately dial clear Large, • readsto.001" 144MM 145 h "Da aie sasanesselcntuto for construction steel durability. stainless and a accuracy is greater Caliper Dial price. 6" economical The an at measurements precision www.generaltools.com • P NO. 8 10700 UPC NO. 4 44145 UPC P NO. 5 10800 UPC nie usd,dphadstep and depth outside, Inside, • reheigfito olrfor roller friction Freewheeling • rcinlcneso table conversion Fractional • cie a lmnmbd ihknurled with body aluminum has Scriber • aie a nie usd,dphadstep and depth outside, inside, has Caliper • akgdi try itd lsi case plastic fitted, sturdy, a roller in thumb Packaged wheeling • free measurement has repetitive Caliper for • lock has Caliper • nie usd,dphadstep and depth outside, Inside, • dutbebzlfrzr setting zero for bezel Adjustable • rod stop Depth roller • thumb wheeling Free measurement • repetitive for Lock • eeiieadacrt readings accurate and repetitive measurements nback on adewt noeallnt f4-3/4" of length overall an with handle measurements eindseiial o hsset this for specifically designed measurement 142 107 108 AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS 144MM 145 SPECIALTY 722 729 141ME 132ME T-89 102 SPECIALTY TOOLS 32nds and mm 16ths and 32nds mm and 16ths 32nds and mm 0" to 1" 132ME 729 729ME 141ME 722 Calipers/Micrometers make quick, accurate, insidemeasurements. and General’s outside Utility diameter Micrometerpractical is and a economical measuringbeginners device as for well as hobbyists. 102 General Tools Make It Easier” measuring faces measurement • Engraved graduations on• barrel Lock for repetitive measurement • Ground and polished carbide • Caliper has lock for repetitive • Friction roller adjustment • Slide lock for gaging 44136 2 UPC NO. GRADS UPC44103 4 NO. RANGE INCLUDES UPC42581 2 NO. GRADS 42594 2 UPC44139 3 NO. GRADS UPC42577 5 NO. General’s all-purpose “It’sYourJob... outside readings in metric and inches general toolroom and machine shop use and device for beginners and hobbyists automotive work adjustments outside readings in 16ths and 32nds 32nds and mm reinforced plastic caliper capacity vernier reading of .1mm and 1/128" (125mm) capacity depth gage measurement POCKET CALIPER • Stainless steel slide caliper with inside• and Decimal equivalents on• back Scale has etched• and 3" filled (76mm) graduations capacity • Well-suited for use in training programs, • Accuracy guaranteed to• .001" Special wrench is included for simple zero UTILITY MICROMETER • A practical and economical measuring • Stainless steel caliper with inside and • Decimal equivalents table• on Scale back has etched• and 4" filled (102mm) graduations capacity 4-INCH SLIDE CALIPERS • 4" (102mm) rule• graduated Inside in and 16ths outside on readings back graduated in POCKET CALIPER • Precision made high strength, fiberglass • Opens to 3" (76mm) outside measurement Slide Calipers, sized to slip into your pocket, can METRIC AND ENGLISH VERNIER• CALIPER Graduated in mm and 16ths of• an Economical inch steel with vernier calipers have 5" • Inside and outside jaws and full• length Caliper has inside, outside depth and step Slide Calipers come inDigital different Calipers, styles Mechanical - Dialpers Electronic Calipers, and Vernier Plain Cali- Slide Calipers. SPECIALTY T-90 S004 109 esrn/akn Kits Measuring/Marking TOOLS SPECIALTY n ahnss irmtr ilClpr "Steel 6" Caliper, mechanics Dial Micrometer, for most machinists: tools the and marking of and four measuring contains useful Kit Measuring Precision The o lFe 800-697-8665 Free Toll i nlds o 0,0t "micro- 1" to 0 102, No. includes: Kit • use- most the of four contains kit This • RCSO ESRN KIT MEASURING PRECISION cpickup magnetic with scriber 88CM, carbide No. tungsten 64ths; and 8ths, 32nds, in 16ths, graduated rigid rule 6" steel 676, stainless No. thousandths caliper; 6" dial to reading 0 145, No. meter; machinists for or tools mechanics marking and measuring ful • a 212-431-6499 Fax l ol akgdi iy oktprotector pocket vinyl in packaged tools All • best General’s of four contains kit designed The is • kit tool size pocket handy This • KIT TOOL/MARKING PROTECTOR POCKET u on standard mount Lug • indicators limit Adjustable • reading two-way decimal Direct • counter accumulator Revolution • travel 1" Full rotated • be may and continuous is Dial • indicator dial diameter •Accuracyto.001" (57mm) 2-1/4" Large • INDICATOR DIAL PLUNGER P O I NLDSOEEACH: ONE INCLUDES KIT NO. 9 34112 UPC hc a esapdclosed snapped be can which scriber and 88, punch No. center automatic 87, pickup; No. magnetic telescoping rule; 383NX, 6" No. 300/1, No. tools: selling hobbyist or machinist mechanic, the for P O READINGS NO. 2 10900 UPC etadright and left point any at setting for "SelRl,Mgei ikU,AtmtcCenter Scriber. Automatic a and Pick-Up, contains Punch Magnetic Kit Rule, Marking Steel The 6" Scriber. Carbide and Rule www.generaltools.com • S008 109 P NO. 8 34106 UPC akgdi try itd lwmolded blow fitted, sturdy, in Packaged • ntutosadcneso al (fractions table conversion and Instructions • aedsge pcfclyfrteetools these for specifically designed case odcml omliees included millimeters) to decimals to o.0"b .001" by .001" to 0 scriber punch, center pickup, automatic magnetic rule, 6" S004 AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS SPECIALTY 553 554 T-91 800543 • Extra-Bright LED UPC26001 7 NO. Magnifiers • Push On /• Push Contoured Off Handle Powerful for• LED Handheld Integrated light Use Stand for• Hands-Free Shatter-Resistant Use Lens • 3-1/2" Lens Diameter• (89mm) 3X Magnification (6X• Inset Power lens) Source: 2 “AA” batteries (included) LIGHTED MAGNIFIER SPECIALTY TOOLS 800543 3x and 6x, asFree well use as make an thiscontrol, integrated tool inspection stand a and for must assembly Hands- in functions. laboratory quality General Tools Make It Easier” • 3x Magnification, 6x Inset Lens FOCAL 4 Lighted Magnifier puts the ™ 3.05.0 3-1/3" 2" “It’sYourJob... LumiLENS 553 Bifocal 554 • Hands-Free Use No. 222 bulb (included) and lens greater magnification large areas of print UPC42456 3 NO. POWER 42462 4 UPC NO. POWER LENGTH • Handy 4 power magnifier has plastic body 4 POWER POCKET ILLUMINATED MAGNIFER • Power Source: “AAA” batteries and • Bulb gives wide• circle Plastic of body illumination and• optical Power plastic Source: lens 2 “C” batteries (included) • 5 power bifocal lens insert gives even 4" ILLUMINATED MAGNIFIER • 4" diameter with 3 power lens covers General’s NEW light directly on yourpowerful subject extra to bright be LEDin viewed. light the With you dark its will again. never Two lens be magnifications, left SPECIALTY T-92 538 750545 1050 565 700540 Magnifiers TOOLS SPECIALTY hr la anfcto ihu ysri.These eyestrain. without magnification need clear who sharp inspectors and mechanics technicians, engineers, laboratory jewel- assemblers, toolmakers, instrument by ers, used are Magnifiers General’s o lFe 800-697-8665 Free Toll "daee ih4pwrlens power 4 with diameter 2" • lab- for magnifier versatile and Economical • MAGNIFIER 2" . oe htepofln,wt power 5 with lens, shatterproof power 2.5 • right- for adapts reflector light Reversible distortion-free • for 4" x 2" measures Lens • MAGNIFIER ILLUMINATED RECTANGULAR efr,mcaisadinspectors and do-it-your- mechanics for selfers, uses, industrial and oratory ioa insert bifocal use left-hand or areas large of magnification • a 212-431-6499 Fax sdb nier,mcais npcos a technicians, lab inspectors, mechanics, engineers, by control, Used quality • spaces laboratory obstructed in or jobs confined demanding in for working Designed for • (115mm) magnifier 4-1/2" powerful free to A distortion (50mm) • is 2" lens from Round sizes • of range Full • xmgiirwt xso lens spot 6x with magnifier diameter 3x 0.8" • - lens Small • i es-4 12m diameter listed (102mm) UL 4" AC. - 110-120V lens into Big plugs • cord ft. 6 bulb • watt 7 lens Illumination: adjustable • has stand rod steel coated Epoxy • MAGNIFIER ILLUMINATED ADJUSTABLE oihdotclgasln ihamtlframe metal a with Versa-Grip lens • glass optical Polished • ULTRATECH ob n rfspeople crafts and do-it-yourselfers, hobby jewelers, assemblers, instrument toolmakers, functions assembly and inspection P O POWER NO. 1 43750 UPC P O IMTRPWRLENGTH POWER DIAMETER 3 50545 9 50543 NO. 2 50542 5 50541 3 00540 UPC 04 6 50544 o atr,idsra n ob use hobby and industrial factory, for ihs pia ult n fe ieresolution. fine offer and the quality of optical are highest Magnifiers Illuminated assembly The and lab- functions. inspections in control, jobs quality demanding oratory for designed are magnifiers ™ adewt o-lpcsingrip cushion non-slip with Handle 750545 700540 750544 750543 750542 750541 www.generaltools.com • ™ 1050 LS MAGNIFIERS GLASS P O OE LENGTH POWER NO. 3 42414 UPC P O OE LENGTH POWER NO. 6 42509 UPC ihwih,drbe1peemolded 1-piece durable Lightweight, • elcal ubad2“A batteries “AA” 2 and bulb Replaceable • -/"(1m)12 8" 1.25 (115mm) 4-1/2" "(0m)12 8" 1.25 (100mm) 4" "(5m . 6" 8" 6" 6" 1.6 1.25 1.6 (90mm) 1.6 3-1/2" (75mm) 3" (65mm) 2-1/2" (50mm) 2" x(ml Lens) (Small 6x lens) (Big 3x lsi frame plastic r included are 538 Bifocal 565 FOCAL . 2" 4" 5.0 2.5 42" AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS FOCAL FOCAL SPECIALTY 536 950 532 527 T-93 533 Magnifiers SPECIALTY TOOLS functions. Our magnifiers arequality of and the offer highest fine optical resolution. magnifiers are designed fororatory demanding quality jobs control, in inspections lab- and assembly General Tools Make It Easier” FOCAL IND. TOT. LENS FOCAL Sing. 4.0 4.0 1" 2.5" Dble.Dble. 4.0 3.0 8.0 6.0 1" 1-1/4" 1.6" 1.25" FOCAL FOCAL 5.0 2" 533 536 537 2.25 8" “It’sYourJob... 2.5 SimulatedBlack Leather case 4" UPC42403 7 NO. MOD. POW. POW. DIA. LENGTH 950-5 527 42412 9 42409 9 532 eyestrain jewelers and engravers other small or subminiature parts, toolmakers, polished blers and others whomagnification need without sharp, eyestrain clear molded plastic cians, engineers, mechanics and inspectors models UPC43734 1 NO. POWER LENGTH 42339 9 UPC NO. POWER LENGTH glass UPC42400 6 NO. POWER LENGTH • Tilt-up lens frame • Fits over prescription glasses • Ground and polished optical lenses eliminate • Leaves hands free to work BINOCULAR MAGNIFIER • For assemblers and inspectors of electronic and • 1" diameter lens • Clear optical glass lens is ground and • For toolmakers, jewelers, instrument assem- EYE LOUPE General’s Magnifiers are useders, by instrument toolmakers, assemblers, jewel- laboratoryengineers, technicians, mechanics and inspectorssharp who clear need magnification without eyestrain. These • Available in single lens and double lens • Case and lens rims are made of black FOLDING POCKET MAGNIFIERS • Fine quality magnifiers for laboratory techni- • Folds into case for storage 2.5 POWER POCKET MAGNIFIER • Has 2.5 power ground and polished optical SPECIALTY T-94 759563 582 759582 580 MB560 Diameter 2 1 / 2 " irr/iiLights Mirrors/Mini TOOLS SPECIALTY 8cniuu or.TeMn’ oewt either with of come Mini’s life The a hours. have continuous which lights life 48 batteries These a “LR41” use. has 4 continuous which require of bulb hours light 100,000 LED of an has Mini-Light The o lFe 800-697-8665 Free Toll laie L4” atre ihabattery a with batteries “LR41”, Alkaline, 4 • o h npcino btutdadhard and obstructed of inspection the For MIRROR • MAGNIFYING POWER 3X TELESCOPING ROUND 2-1/2" long (140mm) 5-1/2" a in fitted is from Magnet parts • iron and steel retrieving for Ideal • magnetic permanent powerful PICK-UP A MAGNETIC • WITH MINI-LITE TELESCOPING Magnetic Neodymium lb. 2 with Light PICK-UP Mini MAGNETIC • WITH MINI-LIGHT TELESCOPING ihqaiy212 6m)diameter (64mm) 2-1/2" quality High • a with batteries “LR41”, Alkaline, 4 • ieo 8cniuu hours continuous 48 of life adt-ec n e okareas work see and hard-to-reach tool pick-up stainless a to fastened both are pick-up oseobjects see to hours continuous 48 of life battery handle designed ergonomically anfiggasmro mrvsvisibility improves mirror glass magnifying eecpsfo -/"–28-3/4" – 7-3/4" from Telescopes • ugdhg-matASpatchandle plastic ABS a high-impact into rugged molded wand telscoping steel 17m–720mm) – (197mm a igntbl on adjustment joint ball nut wing Has machine, • iron or steel any to Attaches inspection • glass oblong 2" x 3-1/2" Adjustable • MIRROR INSPECTION BASE MAGNETIC E ubhsalf f1000hours 100,000 of life a has bulb LED battery • a with batteries “LR41”, Alkaline, 4 • high-impact rugged a to fastened is Light for • anywhere anytime, anything, to on Clips • MINI-LIGHT CLIP-ON “LITE-IT” P NO. 4 42475 UPC P O PKG. NO. 6 58001 UPC • ol plac rohrequipment other or appliance tool, magnet permanent a to mounted mirror fcniuu use continuous of hours continuous 48 of life angle any ball to double adjusts a that with joint Clip Alligator plastic ABS light direct instant, a 212-431-6499 Fax MB560 580 ietlight. direct lp nayhn,ayie nweefrinstant, for anywhere which anytime, clip anything, alligator on an clips with to or up (720mm) extends 28-3/4" which handle telescoping a Carded www.generaltools.com • adefrmxmmperformance maximum for handle performance maximum for handle P O PKG. NO. 7 75959 UPC PKG. NO. 1 05820 UPC PKG. NO. 2 75967 5 75966 UPC E ubhsalf f1000husof hours 100,000 of life a has bulb LED • a b mohsraepl capacity pull surface smooth lb. 2 a Has • rcso nierd70Sre Versa-Grip Series 750 engineered Precision • rcso nierd70Sre Versa-Grip Series 750 engineered Precision • ihsrnt orso eitn stainless resistant corrosion strength High • ih ubhsalf f1000husof hours 100,000 of life a has Bulb Light • iiLgti atndt hoeplated chrome a to fastened is Mini-Light • aladsce etr o simple, for feature socket and Ball • te adetnsfo -/"t 29" to 8-1/2" from extends wand steel otnosuse continuous edmu ou magnet donut Neodymium 26m–737mm) – (216mm otnosuse continuous rs adwt obebl joint ball double a with wand brass oiieadjustments positive 759563 582 759582 759581 Carded Carded Carded Carded AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS ™ ™ SPECIALTY 559 5563 5561 80560 T-95 560 570 558 557 577 555 SPECIALTY TOOLS 5562 2" x 3" 12-1/4", extends to 33" Inspection Mirrors which are attached tosocket knurled joints. handles Telescoping arms withgrip and ball handles vinyl and are cushion offered on some mirrors. 80560 559 General Tools Make It Easier” UPC02146 5 NO. SIZE OVERALL LENGTH UPC05590 3 NO. 2" x 3-3/4"3-3/4" dia. 10-3/4", extends to 9-3/4", 26" extends to 26" 1" x 2" oval 9" 3-1/2" x 2" 11-1/2", extends to 16" 2-1/4" dia.3-1/2" x 2" 10-1/2" – 15" 11-1/2" – 16" 1-1/4" dia.2-1/4" dia. 8" 10-1/2", extends to 15" 1-1/4" x 2" 9-3/4", extends to 26" oblong for No. 557 for No. 560 and No. MB560 “It’sYourJob... 5563 577 570 557RMF 560RMF 555 557 558 5561 560 5562 and vinyl cushion grip handles which are attached tosocket knurled joints handles with ball and and machines by toolmakers,mechanics assemblers, inspectors and inspection of hard-to-see andareas hard-to-reach inspectors and mechanics shatter-resistant 05563 7 42484 6 UPC42478 5 NO. 42480 8 42477 8 UPC NO. SIZE OVERALL LENGTH 42465 5 UPC NO. SIZE OVERALL LENGTH 42468 6 42471 6 05531 3 UPC NO. SIZE OVERALL LENGTH 05562 0 42473 0 • Includes plastic protective• sheath Heavy-duty construction • Nos. 557, 577, 560, and 570 have telescoping arms REPLACEMENT MIRRORS WITH FRAMES ACRYLIC PLASTIC INSPECTION MIRRORS • Fully polished glass mirrors are enclosed in plated holders GLASS INSPECTION MIRRORS • These mirrors facilitate inspection of inaccessible workpieces • 2 Extra bright LED lights facilitate the • Ideal for toolmakers, machinists, • Fully polished glass mirror is • 2 “CF2032” batteries• included 360º Swivel double ball joint Inspection Mirrors facilitate inspectioninaccessible of workpieces and machinestoolmakers, by assemblers, inspectors andFully mechanics. polished mirrors are enclosed in plated holders • Handle has black• cushion Non-slip grip grip • Mirror size: 2"• diameter 36" telescoping METAL INSPECTION MIRRORS TELECSCOPING LIGHTED INSPECTION MIRROR LONG TELECSCOPING INSPECTION MIRROR SPECIALTY ADJUSTMENTS ANGLE INFINITE PERMITS CONNECTION JOINT BALL DOUBLE T-96 759570 759575 npcinMirrors Inspection TOOLS SPECIALTY 70555 70557 olaes sebes npcosadmechanics. and inspectors assemblers, by toolmakers, machines and workpieces of inaccessible inspection facilitate Mirrors Inspection 1 1 o lFe 800-697-8665 Free Toll / 2 709575 1 " 1 / 2 " EECPN WAND TELESCOPING STEEL STAINLESS RESISTANT CORROSION STRENGTH HIGH n shattering and ihpromne112 3m)diameter (38mm) 1-1/2" performance High hard • and obstructed of inspection the For • MIRROR TELESCOPING PLASTIC ROUND 1-1/2" o h npcino btutdadhard and obstructed of inspection the For • MIRROR INSPECTION LENGTH, PLASTIC ROUND 1-1/2" ihpromne112 3m)diameter (38mm) 1-1/2" performance High • ihpromne2 "(1mx76mm) x (51mm 3" x 2" performance High • EECPN MIRROR PLASTIC RECTANGULAR TELESCOPING 3" X 2" o h npcino btutdadhard and obstructed of inspection the For • shattering shattering Lexan objects see to oseobjects see to Lexan etnua Lexan rectangular oseobjects see to ™ ™ • irrrssssrthn and scratching resists mirror irrrssssrthn and scratching resists mirror a 212-431-6499 Fax OTO N COMFORT AND CONTROL GREATER FOR HEAD CONTOURED WITH HANDLE DESIGNED ERGONOMICALLY ™ irrrsssscratching resists mirror o.757hv eecpn rsadvnlcsingrip cushion vinyl and angle arms any telescoping to have adjust 70557 joints Nos. socket • and which ball holders Double plated • in enclosed are mirrors polished Fully • work inaccessible of inspection facilitate mirrors These • MIRRORS INSPECTION TELESCOPING UTILITY 24 0 22347 P O IELENGTH SIZE NO. UPC 24 9 22344 handles joint socket and ball double a with handles to attached are inspectors assemblers, mechanics toolmakers, and by machines and pieces , FIXED ade ihbl n oktjoints. socket and ball designed with ergonomically holders handles to plated attached in are enclosed which are mirrors polished Fully 70557 70555 www.generaltools.com • SURFACE NON-SLIP A HAS GRIP CUSHION SIDED EIGHT -/"da -/"extends 9-3/4" dia. 2-1/4" -/"da "extends 5" dia. 1-3/8" adefrmxmmperformance maximum for handle P O PKG. NO. 3 75957 UPC adefrmxmmperformance maximum for handle adefrmxmmperformance maximum for handle P O PKG. NO. 1 70972 UPC P O PKG. NO. 4 75950 UPC ihsrnt orso eitn stainless resistant corrosion strength High • rcso nierd70Sre Versa-Grip Series 750 engineered Precision • ihsrnt orso eitn stainless resistant corrosion strength High • rcso nierd70Sre Versa-Grip Series 750 engineered Precision • ihsrnt tils te shaft steel stainless strength High • vrl eghi "(203mm) 8" is length Overall • rcso nierd70Sre Versa-Grip Series 700 engineered Precision • te adetnsfo -/"t 30" 762mm) to - 9-1/4" (235mm from extends wand steel OVERALL te adetnsfo -/"t 28" 711mm) to – 7-5/8" (194mm from extends wand steel eit corrosion resists o14-3/4" to o27-1/2" to 759575 709575 759570 HANDLE PLASTIC ABS IMPACT HIGH RUGGED Carded Carded Carded AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS I PALM FIT FACETS CAP ROTATING ™ ™ ™ SPECIALTY 759905 759909 759903 T-97 759383 759394 759398 ™ SPECIALTY TOOLS Carded Carded Carded INSPECTION SETS 3x power magnifier; • Neodymium magnets: 2surface lb., pull 5 capacities lb. •(38mm) and Mirrors diameter 10 & • lb. Magnifiers: 2" smooth mirror 1-1/2" x • 3" 2-3/8" (51mm (60mm)• x dia. 2-1/2" 76mm) 3x (64mm) rectangular power dia. magnifying mirror • Alligator clip • Mini-Lite safely protected within a fitted zippered case ™ • Precision Locking System• firmly Available holds attachments: blades in place • All sets are securely and Inspection Sets ™ ™ Zippered Case/Boxed 759383 2 lb. 759394 5 lb. Speed-Chuck General Tools Make It Easier” 759398 10 lb. strength reinforced nylon ” INSPECTION SET • Precision engineered 750 Series Versa-Grip • Magnet holder is constructed of high- ™ 759903 UPC75933 7 75939 9 NO. PULL PKG. 75958 0 handle for maximum performance handle for maximum ™ ™ allows blade changes and telescoping wand ™ ™ telescoping wand with UPC75960 3 NO. PKG. handle • 2 lb.• magnetic 1-1/2" pick-up round plastic• mirror Batteries • included Mini-Lite handle for maximum performance 3-PIECE TELESCOPING “SPEED-CHUCK • Set includes: • 26" stainless steel • Precision engineered 750 Series Versa-Grip Zippered Case/Boxed Zippered Case/Boxed assembly ™ “It’sYourJob... Speed-Chuck adapter with a double ball joint, ” INSPECTION SET ” INSPECTION SET ™ ™ ™ Speed-Chuck assembly • 5 lb. magnetic pick-up 759909 759905 ™ TELESCOPING Speed-Chuck infinite angle adjustments magnets are 6 times stronger than standard steel wand extends from(165mm 6-1/2" – - 686mm) 27" Cobalt magnets

wand with Speed-Chuck UPC75962 7 NO. PKG. UPC75961 0 NO. PKG. handle for maximum performance

TELESCOPING MAGNETIC PICK-UPS • High powered 2 lb., 5 lb., 10 lb. Neodymium • High strength corrosion resistant stainless • Double ball joint connection permits • Set includes: • 26" stainless steel telescoping 9-PIECE TELESCOPING “SPEED-CHUCK • Set includes: • 26" stainless steel telescoping wand with 5-PIECE TELESCOPING “SPEED-CHUCK • Stainless Steel • 2" x 3"• rectangular 3x plastic power mirror magnifier, alligator clip • Mini-Lite. Batteries included adjusts to any angle

• 2 lb., 5 lb. and 10 lb. magnetic pick-ups • 1-1/2" round mirror • 2" x 3" rectangular mirror • 2-1/2" round• glass 3x magnifying power mirror magnifier,• alligator Mini-Lite clip • Batteries included • Precision engineered 750 Series Versa-Grip

combination provides quick andand limitless retrieval inspection solutions for greater control and comfort (660mm) instantly Speed-Chuck • Precision engineered 750 Series Versa-Grip performance

• Ergonomically designed handle with contoured head • Handle telescopes from 6-3/8" (163mm) to• 26" Spring-loaded • All attachments are fastened to a stainless steel SPECIALTY T-98 394 392 384N 386 709392 antcRtevn Tools Retreiving Magnetic TOOLS SPECIALTY o lFe 800-697-8665 Free Toll ihpwrdNoyimMge is Magnet Neodymium powered High • infinite permits connection joint ball Durable • resists shaft steel stainless strength High • pull magnetic surface smooth lb. 2 a Has • emnn antcpower magnetic Permanent • -/"(2m)oeallength overall (222mm) 8-3/4" • necletto o ereigselparts steel retrieving for tool JOINT excellent An PIVOT • WITH PICKUP MAGNETIC EXTRA-LONG, up lifts magnet neodymium High-power steel • small retrieving for tool excellent JOINT An • PIVOT WITH PICKUP MAGNETIC six is magnet neodymium from High-powered parts • steel retrieving for tool ideal An • PICKUP MAGNETIC FLEX-O-STIFF iron and steel small retrieving for Ideal • six is magnet neodymium High-powered • knurled a in magnet permanent Powerful • PICKUP MAGNETIC POCKET ihpwrnoyimmge it up lifts magnet neodymium High-power • te oymaue 3 30m n can and (330mm) 13" measures body Steel • Magnets adjustments angle corrosion 6-3/4" of length (171mm) overall an with capacity ie togrta tnadCobalt standard than stronger times 6 ie oepwru hnsadr magnet standard than powerful more times otopud n ilnvrls its lose never will magnetism and pounds two to places hard-to-reach from parts places hard-to-reach areas hard-to-reach from parts magnet standard than powerful more times clip pocket handy with holder aluminum eetne o2"(685mm) 27" to extended be its lose never will magnetism and pounds five to places hard-to-reach from • a 212-431-6499 Fax IKU,2L.PULL LB. 2 PICK-UP, MAGNETIC LENGTH FIXED www.generaltools.com • adefrmxmmperformance maximum for handle P O PKG. NO. 1 70972 UPC P O ANTPULL MAGNET NO. 4 42219 UPC P O PULL NO. 6 42228 UPC PULL NO. 8 42224 UPC PULL MAGNET NO. 1 42210 UPC anti itdit n1"(5m)nickel (457mm) 18" an into fitted is Magnet • esrs512 10m overall (140mm) 5-1/2" Measures • oktci o ovnetstorage convenient for clip Pocket grip • cushion with body steel plated up Nickel pick • to user allows joint pivot Locking • oyi hoepae,wt iy cushion vinyl a with plated, chrome is up Body pick • to user allows joint pivot Locking • anthle smd fhigh-strength of made is holder Magnet • rcso nierd70Sre Versa-Grip Series 700 engineered Precision • ltdhle,wihcnb xeddt a retriever to flexible extended (813mm) be 32" can which holder, plated handle corners around objects rphandle grip corners around objects enocdnylon reinforced 709392 386 394 392 384N E b pull lb. 2 NEO E b pull lb. 2 NEO Carded 5lb.pull 2lb.pull AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS ™ SPECIALTY 582 360 395 3601 383NX 759582 T-99 SPECIALTY TOOLS 2 lb. pull 2 lb. pull Carded 1" x 1"(25 x x 1-3/4" 25 x 44mm) 2"x2"x1-1/8" (58 x 58 x 29mm) Carded Carded 360 3601 395 383NX 759581 759582 582 handle for maximum General Tools Make It Easier” ™ magnetism Neodymium donut magnet Versa-Grip chrome plated brass wand with a double ball joint simple, positive adjustments • Demagnetize tools for• use Step in design electronics permits greater conrol of • Has a 2 lb. smooth surface• pull Precision capacity engineered 750 Series • Mini-Light is fastened to a • Ball and socket feature for • Overall length is 20" (508mm) • Holder is fitted with a pocket-clip • Lifts up to 2 pounds Magnetic Retrieving Tools UPC42021 3 NO. DIMENSIONS UPC36010 6 NO. DIMENSIONS UPC42229 3 NO. PULL UPC42208 8 NO. PULL UPC75966 5 75967 2 NO. PKG. UPC05820 1 NO. PKG. performance “It’sYourJob... particles retriever for screws, nuts and metallic demagnetizing screwdrivers, nut drivers, wrenches, taps and small tools tweezers, tool bits and other steel objects (-) opening opening tool hard-to-reach and see work areas ergonomically designed handle life of 48 continuous hours continuous use pick-up are both fastenedsteel to telscoping a wand stainless moldedhigh-impact into ABS a plastic rugged handle (197mm – 720mm) life of 48 continuous hours continuous use steel handle that can extend up to 23-1/2" hard-to-reach work areas 15" (381mm) wire from hard-to-reach places • Converts any tool blade into a magnetic MAGNETIZER/DEMAGNETIZER • Specially designed for magnetizing and PRECISION MAGNETIZER/DEMAGNETIZER • Magnetize and demagnetize screwdrivers, • A powerful permanent magnetic pick-up • Ideal for retrieving steel and iron• parts Magnet from is fitted in a 5-1/2"• (140mm) 4 long Alkaline, “LR41”, batteries with a battery TELESCOPING MINI-LITE WITH MAGNETIC PICK-UP • Demagnetize by sliding the tool through the • Magnetize by sliding the tool through the (+) • Light Bulb has a life of 100,000 hours of TELESCOPING MINI-LIGHT WITH• MAGNETIC Mini PICK-UP Light with 2 lb. Neodymium Magnetic • Telescopes from 7-3/4" – 28-3/4" • 4 Alkaline, “LR41”, batteries with a• battery LED bulb has a life of 100,000 hours of • Magnet is fitted in a 5-1/2" long nickel plated TELESCOPING MAGNETIC PICKUP • A powerful permanent• magnetic Ideal pickup for tool retrieving steel and iron parts from • High-power neodymium magnet • Knurled aluminum body with bendable BENDABLE MAGNETIC PICK-UP • An excellent tool for retrieving steel parts SPECIALTY T-100 368 250 354 397 376 antcRtivn Tools Retrieving Magnetic TOOLS SPECIALTY nor n udos loefciei machine in effective Also outdoors. both and sites, indoors construction Especially new materials. retrieving around ferrous for effective all tool and ideal steel an iron, is Sweeper Magnetic The o lFe 800-697-8665 Free Toll hlo et emt s nconfined in use permits depth Shallow • MAGNETS CERAMIC POT SHALLOW adhesive with strip magnetic flexible Our • STRIPS MAGNETIC Rack, Tool Magnetic 20" - 1 Includes: • magnet permanent Powerful • garages, in tools organizes and Holds • RACK TOOL MAGNETIC control greater for grip handle Plastic shaft • aluminum (991mm) 39" • a for magnets permanent and Powerful, steel • iron, retrieving for tool ideal An • SWEEPER UTILITY and long-life for magnet Vinyl-coated • a for magnet permanent Powerful, steel • iron, retrieving for tool ideal An • STICK PICKUP o.36 n 7Bhv /6 diameter 3/16" have 376B and 376A Nos. • o 7Chsa93"daee clearance diameter 9/32" a has 376C No. • objects small-metal Holds • /6 hc n aiyct odsrdlength desired to cuts easily and thick 1/16" • spaces clean smooth most to adheres backing screws with brackets mounting 2 stations service and workshops comfort and pick-up no-stoop materials ferrous all durability pick-up no-stoop materials ferrous all and laac oe o atnn ihrd or rods with fastening for holes clearance hole bolts surfaces ihsisr rknife or scissors with • a 212-431-6499 Fax ™ SWEEPER aae,wr hp n evc stations. in service tools and organizes shops and work lathes. holds garages, and Rack Tool machines Magnetic milling The presses, equipment drill power as around such up cleaning for shops www.generaltools.com • 23 1 42038 23 7 42036 23 6 42033 P O WIDTH NO. 6 22189 UPC NO. 5 31434 UPC P O I.DPHPULL DEPTH DIA. NO. 1 42111 UPC SIZE NO. 5 42027 UPC WIDTH NO. 8 25001 UPC 21 2 42114 21 3 42117 oeasml required assembly Some • oua onigbakt a eused be can brackets mounting Modular • control greater for grip handle Plastic strength • greater for shaft steel (940mm) 37" • ocet diinllengths additional create to comfort and durability and 376A 376B 376C 369-100 369 368 354 397 366 250 -/"31"1 lbs. 12 3/16" 1-3/8" "14 0lbs. 20 1/4" 2" -/"38 5lbs. 35 3/8" 2-5/8" wee 4 (610mm) 24" Sweeper Stick Pickup 1"x100' "x10' x 1" "x30" x 1" /"x30" x 1/2" AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS 0 (508mm) 20" SPECIALTY 377 375 372 374 370-2 T-101 370-1 CORED SPECIALTY TOOLS Alnico Magnets 1-1/2" 7/8" 18-1/2 lbs. 1/4" 1-1/4" 3/4" 14 lbs. 3/16" 1" 5/8" 6-1/2 lbs. 3/16" 3/4" 1/2" 4 lbs. 1/8" 1/2" 3/8" 1-1/2 lbs. 1/8" 2.4"x1"x1" 25lbs. SIZE OF PULL 1-3/8" 35 lbs. 24 oz. 1-3/16" 11/16" 6 lbs. 6 oz. 5/8" 13/16" 10 lbs. 6 oz. 3/4" 1-1/16" 18 lbs. 12 oz. 1" retrieving steel or ironretain parts. their Alnico magnetic Magnets forcekeepers will indefinitely. insure Removable long life and optimum performance. .468 50.0 9.0 372E 372D 372C 372B 372A OPENING OZ. WEIGHT 374A 374B 374C 374D General Tools Make It Easier” 375 377 linked together with awing strong nuts steel for bar easy and angle adjustment clamp” useful for all light ferrous fabrication work holding applications • Small compact design makes the “quick • Ideal to include in the tool kit for numerous 42226 2 UPC NO. BLOCK PER BLOCK UPC42093 0 42096 1 NO. DIA. PULL WT. HT. 42105 0 42102 9 UPC42122 7 NO. THICKNESS PULL LBS. WT. OZ. 42085 5 42082 4 42079 4 42076 3 UPC42073 2 NO. DIA. HT. PULL HOLE “It’sYourJob... 468 2212 3016 32 42 1-1/2"24 50 1-3/4" 1" 70 2-3/16" 2-5/8" 1-1/8" 1-13/16" 3" 15/16" 2-1/4" 1-1/8" 2-1/2" 1" 1/2" 15/16" 5/16" 1-13/16" 2-1/2" 1-7/8" 5/8" 1-3/16" 7/8" 5/16" 15/16" 5/8" 1-3/8" 3/16" 3/4" 3/4" 1-3/8" 3/16" 3/16" 1-1/2" 10 1/4" 3/16" 8 3/16" 15 28 5 20 .82 8 13 1-1/8" 1-1/8" 1" 3/4" 3/4" 5/16" 5/16" 1/4" 1/4" 9/16" — 3/16" 3 1 APPROX. POLE BETWEEN EACH 370-4 370-6 370-8 370-12 370-16 370-24 370-1 370-2 SIZE PULL WIDTH HT. DEPTH WIDTH POLES, CORED WITH welding, brazing, and soldering,the eliminating need for clamps or temporary fastening two heavy-duty Alnico magnetic blocks insulating ring gives thisholding magnet power the of superior larger magnets attaching to fixtures and machines applications fastening 42041 1 UPC NO. OZ. LBS. IN. IN. IN. IN. IN. HOLE KEEPER 180°, 90°, 45° and 30° holding of ferrous metalassembly for jobs welding and built into jigs or hung when not used MAGNETIC ADJUSTABLE WELDING LINK • Ideal for holding steel plates in position for • General’s welding links are constructed of POT TYPE ALNICO MAGNETS • Unique combination of strong magnet with • 1/4" diameter x 20 threads-per-inch hole for BUTTON TYPE ALNICO MAGNETS • Button shaped magnet has almost unlimited • Retrieves screws and• steel Center parts hole on top of magnet for easy POWER ALNICO MAGNETS • Strong magnetic pull• for Hole lifting, in holding, top sorting, of clamping magnet or for retrieving attaching steel conveyors, or racks, iron and parts welding jigs • Holds both sheet and tube at angles of • Two body holes enable the clamp to be • Designed to enable fast and accurate WELDING MAGNET Aluminum, nickle and cobaltAlnico alloy line make of General’s magnetsstrong strong magnetic and pull permanent. ofperfect The the for Alnico lifting, Magnets holding, make sorting, it clamping or 42053 4 42056 5 42061 9 42050 3 42064 0 42067 1 42044 2 QP05 ™

SAW/DRIVER A 4-IN-1 CUTTING & DRIVING SYSTEM

The Keyless Quick Change Locking Chuck accepts both Quick Change Power Bits and Standard Reciprocating Saw Blades. SPECIALTY T-103 86014 SPECIALTY TOOLS HOLSTER The 2 position quickboth change power locking and handle speed.holds offers A all convenient 14 holster pieces. General Tools Make It Easier” The “QUAD” Saw/Driver 86014 ባ ብ Metal/PVC, wood, • 7 insert bits • 1 hex to• square 1 adaptor quick change• handle 1 holster with• belt-clip 1 bit extender • 3 saw blades; drywall, UPC NO. in the straight or pistol grip position reciprocating blades and speed shank power bits 86014 9 SAW/DRIVER 14 PIECE SET INCLUDES: • Comfortable handle easily locks • Swivel locking chuck holds all ” ™ “It’sYourJob... ቢ ቤ ” Saw/Driver set offers a 4-IN-1 Bit Extender ™ Power Driver in theposition pistol grip Speed Driver, screw orwith nut straight driver handle Jab Saw with straightspecial handle Sheetrock and reciprocal blade Keyhole Saw in thehandle pistol position grip ቤ ብ ባ ቢ “THE QUAD chuck accepts both Quick-Change bits and industry standard reciprocating saw blades 14 PIECE SAW/DRIVER SET “THE QUAD Cutting and Driving System;saw, a power jab driver, and saw, key speed hole driver. • A 4-IN-1 cutting and driving system • The keyless Quick-Change locking SPECIALTY T-104 75622 1902 1901 1915 utn avn Tools Carving & Cutting TOOLS SPECIALTY ait fmtras rmfn,itiaectigto scraping. cutting and intricate carving fine, a heavy-duty from of materials, cutting of precision variety the are for Sets specifically Knife designed Quality Professional Tools General o lFe 800-697-8665 Free Toll 9012 931924 1923 1922 1920 #26 e nlds ut-ld Handles Multi-Blade 2 • includes: Set • blades holds chuck screw locking Heavy-duty • precision the for SET specifically BLADE Designed AND • KNIFE PRECISION 22-PIECE #16 o 2•2-N.2 o 8blades 28 No. - 2 • 26 No. - 2 • 22 No. - 3 • •5-No.11•5-No.16•3-No.17B o n o 0KieBae - Blades Knife 20 • 2 No. and 1 No. materials of variety a of cutting eueyi place in securely ldssonata size actual shown Blades • #28 1903 a 212-431-6499 Fax ossso n aho o.10,1902 1901, Nos. of each one of Consists • SET KNIFE PRECISION P NO. 0 43984 UPC nafte odncase wooden blades fitted assorted a 10 in and knives 1903 and #17 #11 1915 #22 elcmnsadacsoybae r available. are blades sharp accessory surgically and of and replacements selection people broad crafts A users, hobbyists. industrial for knives hobby eea ol fesacmlt ieo precision of line complete a offers Tools General www.generaltools.com • rcso nierd70ad70Series 750 and 700 engineered Precision • nutysadr blades standard industry Versa-Grip rcso nvsfrfn nl cuts angle fine for knives Precision • KNIVES HOBBY PRECISION performance •Packedinaquantityof5. to medium from cutting precision For • BLADES KNIFE HOBBY P O OSRCINWIH QTY. WEIGHT CONSTRUCTION 9 43978 NO. 5 43976 1 43974 UPC P O ELCMN FOR REPLACEMENT NO. UPC P O PKG. NO. 0 75622 UPC 39 3 43996 9 43994 5 43992 8 43988 ev cuts heavy akgdi oktszdzpee case zippered sized pocket •All a in Packaged • ULTRATECH ™ 1903 1902 1901 adefrmaximum for handle 1924 1923 1922 1920 ADEKIEPKG. KNIFE HANDLE 75622 ™ nf ade accept handles knife lmnmHaydt 5 5 5 Heavy-duty duty Medium duty Light Aluminum Aluminum Aluminum 92 93 1905 1903, 1902, 1905 1903, 1902, 1905 1903, 1902, 1901 iprdCase/Carded Zippered AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS SPECIALTY 855 852 1293 8501 Bent Square Chisel, 5/16" T-105 864 5/16" Straight Skew Chisel, Bent V Parting Tool, 5/32" SPECIALTY TOOLS Straight Small Gouge, 5/32" Bent Large Gouge, 5/16" Set of 6 Blades Heavy-duty 864 864B 855 The Five-Piece Carving Toolthat Set is offers forged a toollasting fixed steel, sharpness. blade ground Handles and arefor hardened made greater for of control hardwood and comfort grip. General Tools Make It Easier” Cutting & Carving Tools 3 wood and 3 metal alloy steel blades, No. 852, in storage handle • Set of 6 replacement blades: • Reversible blade for push or pull cutting • Comes with three replaceable heavy-duty UPC43067 0 43070 0 NO. UPC43046 5 NO. 5" (125mm) 0.0250.025 5 100 “It’sYourJob... Bent large gouge, 5/16" Straight small gouge,Bent 5/32" V partingStraight tool, skew 5/32" chisel,Bent 5/16" square chisel, 5/16" 8501 852-5 852-100 1293 for cutting metal high-impact plastic handle selfers and professionals cutting single and double strength glass hardened for lasting sharpness board, matboard, cardboard, corkingboard, roofing, linoleum, carpet, plasterboard, veneers and other materials positions 43061 8 UPC NO. LENGTH UPC43027 4 NO. THICKNESS PKG. QTY 43030 4 43900 0 UPC NO. BLADE SHAPE • Sturdy tubular frame • 6" (150 mm) replaceable heat treated blade JUNIOR HACKSAW • Handy cutting tool for hobbyists, do-it-your- • Ergonomically designed with a comfortable GLASS CUTTER • Cuts plate glass• from Steel 1/8" wheel to with 1/4" honed thick angle of 120° for • Tooth design to remove rough edges FIVE-PIECE CARVING TOOL SET • Five different blade• shapes Blades are made of hand forged• tool Half steel, round ground palm and • style Comes handles in are vinyl made• case Overall of length hardwood 5" HEAVY-DUTY UTILITY KNIFE BLADES SLIDE LOCKING UTILITY KNIFE • For cutting and scoring fiberboard, wall- • Opens instantly to any one of• three Blade cutting retracts into handle for safety General’s Utility Knives arescoring used fiber-board, for matboard, cutting roofing,carpeting, and linoleum, plasterboard and veneers. • Ball end handle for snapping of scored glass SPECIALTY T-106 71260 1261 rmes np ce Fasteners Screw & Snaps Grommets, TOOLS SPECIALTY isadSrwFsee is hs aiu isare kits various These Kits. Fastener Fastener Snap Screw sizes, and three Kits in Kits, available Grommet are Brass which Solid offers Tools General o lFe 800-697-8665 Free Toll 1265 1267 nre oyfrgetrcmotadsafety and comfort greater for body Knurled • ce npfsee aehs38 long 3/8" has base fastener snap Screw • otis2peestigto n fastener 6 and tool setting 2-piece Contains • KIT FASTENER SNAP SCREW safety and comfort greater for body Knurled will • plating nickel with fasteners brass Solid fastener • 6 and tool setting 2-piece Contains • KIT FASTENER SNAP oi rs atnr ihnce ltn will plating nickel with fasteners brass Solid • etn olhskuldbd o greater for body knurled has tool Setting • with grommets steel plated brass Contains • repair to used are kits size various These • KITS GROMMET UTILITY he ie available sizes lines Three with • coded are anvil and tool Setting • 10 5 41107 P O SPECIFICATIONS NO. 8 41106 UPC P O SPECIFICATIONS NO. 2 41108 UPC 10 9 41109 o rust not ce o tahn owo,patcand plastic wood, to attaching for screw fiberglass rust not sets sets ofr n safety and comfort anvil and block, mandrel backer hardened hardwood and cutter hole covers pool and furniture sailcloth, lawn awnings, tents, tarpaulins, canvas, o ahidvda iegrommet size individual each for • a 212-431-6499 Fax 1267 1268 1266 1265 ce npFsee Kit Fastener Snap Screw ce npFsee Refills Fastener Snap Screw 6 Fasteners 6 with npFsee Refills Fastener Snap 6 ih6Fasteners 6 with Kit Fastener Snap allt,lw untr n olcvr.Ec set instructions. Each step-by-step covers. handy pool has and awnings, furniture tents, lawn tarpaulins, sailcloth, canvas, repair to used www.generaltools.com • RME REFILLS GROMMET SIZE INDIVIDUAL P O SPECIFICATIONS NO. 1 41105 4 41104 7 41103 UPC DESCRIPTION NO. 2 22343 5 22342 8 22341 UPC 1261-4 1261-2 1261-0 71264 71262 71260 ih2 Grommets 24 with Refill Grommet 1/2" Grommets 24 with Refill Grommet 3/8" Grommets 24 with Refill Grommet 1/4" grommets 12 with Kit Grommet 1/2" grommets 24 with Kit Grommet 3/8" grommets 48 with Kit Grommet 1/4" AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS SPECIALTY S1274 1280ST T-107 S1270 SPECIALTY TOOLS 1271ST 3/32" 1/4" 11/16" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 13/32" 7/16" 1/2" 9/16" 5/8" 3/4" 10 pc. set 3/8" 1/2" 5/8" 3/4" 13/16" 7/8" 15/16" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" These fine quality toolsfor are long forged life and and heat-treated the cutting edges will stay sharper longer. S1274 1280A 1271A 1271H 1280B 1280C 1280D 1280E 1280F 1280G 1280H 1280-I 1280J 1280K 1280L 1280M 1280N 1280-O 1280P Punches & Punch Sets 1271C 1271E 1271G 1271-I 1271J 1271K 1271L 1271M 1271N 1271-O 1271P 1271Q General Tools Make It Easier” • Fitted plastic storage case UPC43751 8 NO. DESCRIPTION UPC43856 0 NO. SIZE UPC43793 8 43799 0 NO.43813 3 43816 4 SIZE 43859 1 43862 1 43865 2 43868 3 43870 6 43872 0 43874 4 43876 8 43878 2 43880 5 43882 9 43884 3 43886 7 43888 1 43890 4 • Available in individual sizes listed • Available in individual sizes listed 43804 1 43810 2 43819 5 43822 5 43821 8 43825 6 43827 0 43829 4 43831 7 43833 1 S1270 Set of 7 Setof6 “It’sYourJob... 3/8", 7/16", 1/2", 9/16",1", 5/8", with 3/4", driving 7/8" mandrelplastic and comes storage in case a molded holes in soft materials and leather UPC43759 4 NO. • Compact and economical set for punching • Set of 10 punches, one each of 1/4", 5/16", GASKET PUNCH SET 1271ST 1280ST have a threaded couplingpage to and prevent hold slip- punch securely to mandrel leather, rubber, canvas, cardboard,and plastic sheet metal pered alloy steel punches:7/16", 1/4", 1/2", 5/16", 5/8", 3/8", 3/4", 7/8" and 1" steel mandrel vas, cardboard, plastic and other materials hole for easy removal of punched material 3/16", 1/4", 5/16", 3/8",comes 7/16", in and a 1/2", plastic roll pouch material and soft metals each of 1/4", 3/8",1", 1/2", comes 5/8", in 3/4", plastic 7/8" roll and pouch UPC43896 6 NO. SIZE UPC43849 2 NO. SIZE • Heavy-duty, spring-loaded, self-centering • Both mandrel and punches are knurled and PROFESSIONAL 10-PIECE GASKET PUNCH• For SET punching holes in gasket material, • Nine interchangeable hardened and tem- HOLLOW STEEL PUNCHES • For punching holes in leather, rubber, can- • Made of forged steel with side• clearance The 1280ST which consists of six punches, ARCH PUNCHES • For punching holes in leather, rubber, gasket • Inside taper for• clearance Heat treated forged• steel The 1271ST consists of seven punches, one Arch Punches, Hollow SteelPunches Punches are and all Gasket usedgasket for material, punching leather, rubber, roundplastic, canvas, holes sheet cardboard, in metal and other soft materials. SPECIALTY O ETRGRIP BETTER FOR JAWS SERRATED T-108 h efc eeespir o aigloops making for pliers jewelers perfect The • PLIERS NOSE ROUND A a egh-111"(27mm) 1-1/16" - length jaw OAL • A egh-434 (120mm) 4-3/4" - length OAL • P O PKG. NO. 0 41061 UPC n uprings jump and 901 Pliers TOOLS SPECIALTY o lFe 800-697-8665 Free Toll 902 ILNTRUST NOT WILL STEEL VANADIUM CHROME QUALITY HIGH uk(pnStock) (Open Bulk • a 212-431-6499 Fax PNN JAWS OPENING QUICK FOR SPRING LEAF STEEL LARGE o 3 ic Mn”PirSt o.95 0,97 908 907, 906, 905, Nos. Set; Plier “Mini” piece 4 - 934 No. • •No.938-8piece“Mini”PlierSet -IC EHIINSMN-LE SET MINI-PLIER TECHNICIAN’S 8-PIECE ossso ih ftems oua ie fmini-pliers of sizes popular most the these of of eight storage of safe Consists and • easy the gripping for safe Case for Vinyl handles Durable grip • cushion dipped jaws Double opening • quick head for Fully-polished Spring • Leaf Steel grip Large rust better • not for will jaws Steel Serrated Vanadium • Chrome quality High Technicians, • Electricians, for designed set compact A • P O PKG. NO. 0 00934 8 00938 UPC o 0 Mn”Lnmn les A 4-1/2" - OAL Pliers. Linemans 4-1/8" “Mini” - - OAL 4-1/4" 908 Cutter. - No. End 6". OAL • - Cutter. - 907 Head/Oval OAL No. Diagonal Pliers. • - Nose 906 Needle No. Long • - 905 No. • o 0 uvdCanNs les A 4-3/4" - OAL Pliers. Nose 4-7/8 Chain - Curved OAL - Pliers. 4-3/4" 904 Jaw - 5" No. Smooth OAL - • - Pliers. OAL 903 Nose Pliers. No. Round Jaw • - Serrated 902 Nose No. Chain • - 901 No. • pliers precision Do-it-Yourselfers and Hobbyists A egh-5 (127mm) 5" - (30mm) length 1-3/16" OAL - • length jaw OAL • cutting most handle will cutter Side • gripping and bending shaping, cutting, For PLIERS • JAW SERRATED NOSE, CHAIN P O PKG. NO. 7 41059 UPC requirements wire and materials light www.generaltools.com • N CONTROL AND COMFORT USER MAXIMUM FOR HANDLE SHAPED ERGONOMICALLY 934 938 ic iy Case/Boxed Vinyl - Piece Case/Boxed 4 Vinyl - Piece 8 901 uk(pnStock) (Open Bulk 902 ADE FOR HANDLES DIPPED DOUBLE AEGRIPPING SAFE GRIP CUSHION AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS SPECIALTY T-109 908 906 904 Bulk (Open Stock) 905 Pliers Bulk (Open Stock) 903 positioning and retreiving UPC41067 2 NO. PKG. LONG NEEDLE NOSE PLIERS • Used for extreme far reaching access, • OAL jaw length• - OAL 2-1/8" length (54mm) - 6" (152mm) Bulk (Open Stock) SPECIALTY TOOLS 907 retrieving objects from tight areas UPC41064 1 NO. PKG. FLAT NOSE, SMOOTH JAW• PLIERS For bending wire, jewelry making and • OAL jaw length• - OAL 1-1/16" length (27mm) - 4-7/8" (124mm) materials and wire UPC00907 4 NO. PKG. • OAL jaw length• - OAL 9/32" length (7mm) - 4-1/8" (105mm) END CUTTER • For accurate flush surface cutting of light General Tools Make It Easier” Bulk (Open Stock) Bulk (Open Stock) Bulk (Open Stock) 906 904 908 als. For an accurate cut in tight areas UPC41069 2 NO. PKG. positioning with non-serrated jaws requirements to form a bend UPC41066 5 NO. PKG. UPC00908 1 NO. PKG. • OAL jaw length• - OAL 1/2" length (13mm) - 4-1/4" (108mm) OVAL HEAD DIAGONAL CUTTER • For cutting soft wire and other light materi- • OAL jaw length• - OAL 1-1/8" length (29mm) - 4-3/4" (120mm) CURVED CHAIN NOSE PLIERS • Used for odd angle access, retrieving and • OAL jaw length• - OAL 7/8" length (22mm) - 4-1/2" (114mm) • Side cutter will handle most cutting • Serrated jaws for better grip “MINI” LINEMAN’S PLIERS • For securing a positive grip on flat objects “It’sYourJob... 907 905 903 SPECIALTY T-110 S476 478 64 72 69 inwt ihrapl rtitmotion. twist or pull a either extrac- with allows tion design bend compound The uce,Srpr Files & Scrapers Punches, TOOLS SPECIALTY nlahr lsi,rbe,cna ador and cardboard materials. canvas similar holes rubber, round plastic, leather, punching spring in for convenient tool a self-opening is tension, Plier Punch Revolving General’s o lFe 800-697-8665 Free Toll ltdsatadpitae4 (101mm) 4" are point and shaft Plated • allows design bend compound General’s • PULLER PIN COTTER pigoeigfrfs n ayctigor cutting easy and fast for opening or Spring individual • for desired size wire the Dial • STRIPPER WIRE DIAL adndadtmee rpeeg ld is blade edge triple tempered and Hardened • and trimming, scraping, for tool Useful • I-IC WS ATR EDEFL SET FILE NEEDLE PATTERN SWISS SIX-PIECE eindt etteeatn requirements exacting the meet to Designed • rcso aeo ietqaiyto steel tool quality finest of made Precision • nlnt n aeo oglsigheat steel lasting carbon long high of treated made and length in confined in use pull areas for a work Ideal either motion. with twist pins or cotter extract to user stripping wire damaging without stripping repetitive eurn eas uigadohrmaterials other and tubing metals, deburring eue nwo adewt te ferrule steel with handle wood in secured eees acmkr n te craftspeople other makers, and instrument watchmakers makers, jewelers, die and tool of RAGLRSCRAPER TRIANGULAR • a 212-431-6499 Fax WARDING (FLAT) QAERUDHALF ROUND SQUARE h ilWr tiprcnb e oadsrdsize desired wire. without a the stripping to damaging repetitive set or be individual can for Stripper Wire Dial The IEEDVIEWS END FILE www.generaltools.com • uc ie:56" /2,76" 1/8", 7/64", 3/32", 5/64", sizes: Punch tapered • six with steel plated of Made • self-opening tension, spring convenient A • PLIER PUNCH REVOLVING 2snl tl cut style case single plastic #2 button • snap in Packed • P O SPECIFICATIONS NO. 6 41030 UPC P O IEGG CAPACITY GAGE WIRE NO. 8 41036 UPC P O LENGTH NO. 9 41039 UPC P NO. 4 42321 UPC /2,31"(.,25 .,35 .,4.5mm) 4.0, 3.5, 3.0, 2.5, (2.0, 3/16" 5/32", punches steel hardened hollow, and materials and similar leather, cardboard in canvas, rubber, holes plastic, round punching for tool P O EGHFLSI SET IN FILES LENGTH NO. 4 42318 UPC ev-uypatchnl ihacomfort- pins a cotter with remove handle to plastic way Heavy-duty easy • and safe A • iy uho handles cushion Vinyl hardened • protect to stripper closes lock Dial • ROUND olwgon utn de tysharp stay edges cutting ground Hollow • begrip able utn edges cutting ogradrsapneasily resharpen and longer SQUARE THREE S476 478 64 69 72 EQUALLING (MILL) -/"(210mm) 8-1/4" -/”6 5-1/2” egh -/"(190mm) 7-1/2" Length: 2 4 6 8 0 2 4 26 24, 22, 20, 18, 16, 14, 12, AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS SPECIALTY 890 S475 S477 707476 WARDING (FLAT) T-111 ROUND FILE END VIEWS THREE SQUARE HALF ROUND SPECIALTY TOOLS (FLAT) 1-1/16" (27mm) WARDING (MILL) EQUALLING Holster/Carded SQUARE 5-1/2" 12 THREE SQUARE 3 files and handle ROUND Precision made of the finest quality tool steel. The 5-1/2" long knurledmaximum aluminum filing handle control provides andfit comfort all and styles will of General’s Swiss Pattern Files. EDGE 707476 S477 890 FILE END VIEWS S475 JOINT ROUND (MILL) 4-1/8" (105mm) General Tools Make It Easier” EQUALLING NN-H-0085 craftsmen • 8-1/2" (213mm) overall• size #2 single style• cut General Purpose file set for hobbyists and • Conforms to government specifications • Packed in snap button plastic case UPC70746 8 NO. PKG. UPC43666 5 NO. UPC42315 3 NO. LENGTH FILES IN SET UPC42319 1 NO. • #2 single style cut Multi-File & Needle File Sets ™ FILE END VIEWS THREE SQUARE KNIFE BARRETTE SLITTING ROUND “It’sYourJob... OVAL

CROSSING ROUND HALF

securely in place handle assembly meet the needs ofdie craftspeople, makers, tool hobbyists and and jewelers 5-1/2" (138mm) long withdiameter 1/8" shanks (3mm) Chromium Alloy Steel Cut Swiss Pattern positive locking used file shapes: flat,All round are and high-quality triangular. tool5-1/2" steel (138mm) and long measure handle provides maximum filingcomfort control and and other tang handled tools the entire length ofprevent the slipping inserted tang to A complete set ofmeet General the Purpose needs files ofand to craftsman, jewelers hobbyists Files are made of high quality tool steel handle for maximum performance three most commonly usedround file and shapes: triangular. All flat, (138mm) measure long 5-1/2" • Precision engineered 700 Series Versa-Grip • Precision locking screw chuck holds files • A basic set of General Purpose Files to • Set includes 6 different files. All measure • Files are constructed of high quality • All files are 2-1/2" (63mm) long,• #2 Single Knurled handle file can be used without ADJUSTABLE FILE/TOOL HANDLE • For holding files, reamers, hacksaw blades • Exclusive steel parallel clamping jaws grip • Large, quick adjusting knurled knob ensures • Rustproof handle with steel parts • • SWISS PATTERN NEEDLE FILE SET FOUR-PIECE SWISS PATTERN NEEDLE• FILE Set includes SET three WITH of HANDLE the most commonly • A 5-1/2" (138mm) long knurled aluminum 6-PIECE SWISS PATTERN NEEDLE FILE SET General Tool’s Swiss Patterndesigned Needle to File meet Sets thetool are exacting and requirements die of makers,watchmakers, instrument hobbyists makers, and jewelers, other craftspeople. • Set includes 12 different files including the SQUARE

(FLAT) WARDING SPECIALTY ADN (FLAT) WARDING T-112 707862 707475 ietqaiyto te.Kuldhnl iecnb used be can file handle Knurled the steel. of tool made quality Precision finest craftspeople. other die and watchmakers, and hobbyists jewelers, tool makers, of designed instrument requirements are makers, exacting Sets the File meet Needle to Pattern Swiss Tool’s General PCAT TOOLS SPECIALTY ie&PoeSets Probe & File SQUARE o lFe 800-697-8665 Free Toll CROSSING 60004 ROUND o rbn,cenn,pcigo marking or BLADE picking FIXED cleaning, - probing, For SET • PROBE BLADE PRECISION 4-PIECE ahbaei -/"(7m iha overall an with (67mm) 2-5/8" is blade Each • ldscntutdo ettetd8650 treated heat of constructed Blades • mini-tool popular most the includes Set • rcso nierd60Sre Versa-Grip Series 600 engineered Precision • adefrmxmmperformance maximum for handle ml oksurfaces work small 5 ed•9ºBend 90º • Bend 35º • egho "(152mm) 6" of length Hook 180º • Straight • configurations: lo te (nickel-chromium-molybdenum) steel Alloy • rcso nierd70Sre Versa-Grip Series 700 engineered Precision • files holds chuck screw locking Precision without • used be can file handle Single Knurled #2 • long, (63mm) 2-1/2" are files All • quality high of constructed are Files • measure All files. different 12 includes Set • Files Purpose General of set SET complete A FILE • NEEDLE PATTERN SWISS 12-PIECE adefrmxmmperformance maximum for handle eueyi place in securely assembly handle Pattern Swiss Cut Steel Alloy Chromium (3mm) shanks 1/8" diameter with long (138mm) 5-1/2" jewelers and hobbyists tool makers, craftspeople, die of and needs the meet to OVAL a 212-431-6499 Fax IEEDVIEWS END FILE AFROUND HALF laig ikn rmrigsalwr surfaces. work small marking of or variety picking wide cleaning, a in useful are Hooks Spring and ehncladeetia ucin.Ielfrprobing, for Ideal functions. electrical and Positioning mechanical Probe, General’s place. in chuck securely screw files locking holds Precision assembly. handle without QALN (MILL) EQUALLING www.generaltools.com • ™ O YESZ LD LENGTH BLADE SIZE 610004B TYPE 610003B 610002B 610001B NO. contains: Set ahbaei "ln (127mm); long 5" is blade Each • blades holds chuck screw locking Precision • marking or picking, cleaning, probing, For • SET PROBE STEEL STAINLESS INTERCHANGEABLE 4-PIECE rcso nierd70Sre Versa-Grip Series 700 engineered Precision • steel stainless treated heat 4 • Includes: Set • adefrmxmmperformance maximum for handle P O PKG. NO. 2 60004 UPC P O PKG. NO. 4 70786 UPC A -/"(1m)wt handle with (216mm) 8-1/2" OAL surfaces work small 5 ed•9ºBend 90º • Hook Bend 180º 35º • • Straight • configurations: point eueyi place in securely ™ KNIFE P O PKG. NO. 1 70745 UPC rb 8°Ho rb 2-5/8"(67mm) 2-5/8"(67mm) Probe Hook 2-5/8"(67mm) 180° Probe 2-5/8"(67mm) Bent 90° Probe Probe Bent 35° Probe Probe Straight Probe Probe BARRETTE 60004 707862 707475 SLITTING Carded Holster/Carded iprdCase/ Zippered AEYGOGGLES SAFETY SAAPPROVED OSHA

LASWEAR ALWAYS Carded

ON ON EDGE ROUND JOINT ™ HE SQUARE THREE SPECIALTY 589 839 707863 707865 T-113 868 862 Probe Sets ™ ™ SPECIALTY TOOLS Zippered Case/Carded 9" Holster/Boxed 5-5/8" (143mm) 6-1/2" (165mm) 5-1/2" (138mm) 589 839 862 868 707865 707863 General Tools Make It Easier” •35ºBend•90ºBend•180ºLoop, surfaces Handle • 5" Extension blade • Straight Double Bend • 180ºPull Hook Hook Probes • • 135°Hook Offset Pull • Hook Adjusting • Pull/Push• Pull/Push Hook Placement Guide/Lifter convenient and safe storage Handle • Offset Pull• Hook Pull/Push • Hook 135° •Hook Pull Adjusting • Hook Pull/Push Placement Guide/Lifter • V-grooved working edge for use on pipes • Magnetic working edge for use with metal • Protective screw-on cover• prevents All leakage aluminum construction • Convenient pocket clip • For use with lubricants only • Hex head prevents rolling • Packaged in a reuseable plastic tube • Precision engineered 700 Series Versa-Grip • Packaged in a fitted zippered case for • Set Contains: • Twist Chuck Multi-Purpose • Holster included for• convenient Precision storage engineered 700 Series Versa-Grip • Set Contains: • Twist Chuck Multi-Purpose 42698 7 UPC58900 2 NO. OVERALL LENGTH UPC NO. LENGTH UPC24500 7 NO. OVERALL LENGTH UPC24501 4 NO. OVERALL LENGTH UPC70962 2 NO. PKG. UPC75970 2 NO. PKG. handle for maximum performance handle for maximum performance “It’sYourJob... electrical functions inserting and adjusting wiresin and hard-to-reach springs areas small work surfaces blades securely in place OAL 7-1/2" - 8-1/2"with (184mm handle - 216mm) internal aluminum frame requirements of professionals positions reversible reading vials meets the accuracy lubricant DIY’ers electrical functions inserting and adjusting wiresin and hard-to-reach springs areas blades securely in place (127mm); OAL 7-1/2" -216mm) 8-1/2" with (184mm handle - small work surfaces configurations: 45 degree, twoand double hook bends bend small work surfaces configurations: 45 degree, doublehook bend bend and and placement of lubricant • Useful in a wide variety of• mechanical For and separating and positioning wires, • For probing, cleaning, picking or marking • Heavy-duty locking screw chuck holds • Each blade is 5" long (127mm); • Heat resistant, unbreakable endplates and • Readings possible from top, bottom or side MAGNETIC TORPEDO LEVEL • Quality crafted torpedo level with large PRECISION OILER • For the exact placement of oil• or For any technicians, other contractors, hobbyists and • Generous reservoir • Useful in a wide variety of• mechanical For and separating and positioning wires, • Heavy-duty locking screw chuck holds • Each blade is approximately 5" long 5-PIECE STAINLESS STEEL POSITIONING AND SPRING HOOK SET 12-PIECE STAINLESS STEEL PROBE, POSITIONING & SPRING HOOK SET 4-PIECE MICRO PROBE SET • For probing, cleaning, picking or marking • Four heat treated, high carbon steel point • Extra long aluminum knurled body 3-PIECE PROBE AND HOOK• For SET probing, cleaning, picking or marking • Three heat treated, high carbon steel point • Extra long aluminum knurled body • Smooth actuator allows for greater control SPECIALTY T-114 MSV350D 81001 MSV250 otg Detectors Voltage TOOLS SPECIALTY rcso oto icismk tes odistinguish to easy it make Micro- circuits metal. control hidden pipes, processor and studs, voltage locating carrying for and wire ideal Voltage are Stud, Detectors LCD Metal and LED 3-IN-1 General’s o lFe 800-697-8665 Free Toll I-O OLADMTRBG 6 WIDE 16" BAG, METER AND TOOL ZIP-TOP iesos 2Hx1" 8"D x 16"W x 12"H strap Dimensions: shoulder • non-slip padded Adjustable for • reinforced rivet and mouth frame Steel • bottom reinforced Moisture-resistant • da o oaigSus ie,WrsCryn otg n idnMetal Hidden and Voltage Carrying Wires DETECTOR Pipes, METAL Studs, Locating / VOLTAGE for Ideal / STUD LED 3-IN-1 da o oaigSus ie,WrsCryn otg n idnMetal Hidden and Voltage Carrying DETECTOR Wires METAL Pipes, Studs, / VOLTAGE Locating for / Ideal STUD LCD 3-IN-1 DIGITAL necessary probe No • battens/studs, between distinguish to or Easy Metal • with operated be can Detector Stud • provides Switch Selector Metal/Voltage • indicate LED’s consuming power low 4-level • combined Detection Metal and Voltage Stud, • FEATURES: eetbeMtl otg n Stud and Voltage Metal, Selectable • FEATURES: ir-rcso oto icisprovide Circuits Control Micro-Processor • uoPwrOFF Power Auto • position exact pinpoint buzzer to with Multi-Scan-Level LCD • on shown Results • o oe consumption power Low • LCD on indicated status Battery • da o h .IY oewe,Handyman, Homeowner, I.Y. D. the for Ideal • P NO. 9 01319 UPC ugdueaddurability and use rugged ea ie/ue rojcscarrying voltage objects or pipes/tubes metal simultaneously Detector Voltage wiring or metal hidden detecting in accuracy detection stud precise unit one in eetoso uoMd operform to Mode Auto or detections rcs n cuaedetections accurate and precise simultaneously functions 3 obitadProfessional and Hobbyist • 81001 a 212-431-6499 Fax 35x46x203mm) x 406 x (305 admn obita elateprofessional. the owner, a home well DIY as the hobbyist for handyman, ideal An objects voltage. or carrying pipes/tube metal battens/studs, between www.generaltools.com • nlds srsManual User’s • Includes: ♦ ♦ ♦ nlds srsManual User’s • Includes: ♦ ♦ ♦ P NO. 5 01276 UPC P NO. 8 01275 UPC ntincluded) (not battery “9V” 1 Source: Power (178g) 6.3oz Weight: 32mm) x 65 x (155 1.3"(D) x (W) 2.6" x 6.1"(L) Dimensions: ntincluded) (not battery “9V” 1 Source: Power (185g) 6.5oz Weight: 32mm) x 65 x (155 1.3"(D) x (W) 2.6" x 6.1"(L) Dimensions: SPECIFICATIONS: SPECIFICATIONS: OLBAGS TOOL MSV250 MSV350D AEYGOGGLES SAFETY SAAPPROVED OSHA LASWEAR ALWAYS ™ SPECIALTY TOOLS Auto Emergency Tool

• Shatters automotive side windows for emergency escapes • High-visibility red flashing emergency light • Magnets hold the tool to the vehicle • Bright white LED flashlight helps you see at night • Safety blade cuts seat belts • Includes 3 “AAA” batteries in a convenient battery compartment

UPC NO. PKG. 79020 0 7902 Carded

LED Flashlight

Seat Belt Cutter

Flashing Hazard Light

Glass Breaker Easy Battery Access “It’sYourJob...General Tools Make It Easier” T-115