The Expert Wood Finisher;

Total Page:16

File Type:pdf, Size:1020Kb

The Expert Wood Finisher; ^^^^^^^^^^^mmmm'^ '-^m:^ ^ (kss \ __ \i^ PRFSENTED m^ THE EXPERT WOOD FINISHER A Text Book for the Guidance of the Expert Workman and Manual of Instruction for the Learner THIRD EDITION Entirely Re-Written and Brought Down to Date, with Much New Matter and the Elimination of Old, Making THE Work a Thoroughly Reliable Source of Practical Information for the Wood Finishing Trades. BY A. ASHMUN KELLY Author and Publisher of the EXPERT SERIES of Books for House and Sign Painters, Paper Hangers, Interior Decorators, Calciminers, and Wood Finishers. A. ASHMUN KELLY 1921 Copyrighted, 1921 By a. Ashmun Kelly «1FT -9*24 UN I — TABLE OF CONTENTS PAGE Description of the Woods Used 1 Oak, Mahogany, Walnut, Maple, Red Gum, Birch, Beech, Redwood, Cypress, Hard Pine, Sycamore, Ash, Rosewood, Cherry, Chestnut. Wood Filling 16 Close-Grained and Open-Grained Woods Listed and Described—Filling Open-Grain Woods—List of Paste Fillers—Table of Colors Used in Paste Fillers—Fillers for the Various Woods—Some Paste Filler Notes Liquid Filler Notes—Some Liquid Filler Formulas Filling and Finishing the Various Woods—Etc. Finishing Western Woods 62 Finishing Hardwood Floors 67 General Description—Wax Finish—Varnish Finish Finish for Hard Pine Floor—Finishing Hardwood Floors—-Wax Floor Polish Formula—^Polishing Hard- wood Floors—Waxing Old Floors—Floor Wax Form- ulas—Floor Waxing Notes—Crack Fillers and Floor Putties—Cracks in New Floors—Large Floor Cracks Putties and Cements for Hardwoods—Renovating Old Floors—A Few Minor Floor Notes—Douglass Fir Floor Finishing. Finishing Veneered Work 82 Preparing Mahogany Veneered Surface—Dyeing Veneers Black—Mahogany Veneer and Birch—Birch and Walnut Veneer—Finishing Walnut Veneer—Lines of Butt Joints do not Match—Staining Veneered Work —Pohshing Veneered Work—Protecting Inlay or Marquetry—Penetrating Ebony Stain—Veneer Finish- ing Notes. Wood Stains and Wood Staining 90 General Description of Processes— Staining Oak—To iii —— iv CONTENTS PAGE Match Brown Oak—Weathered Oak—Bog Oak—Mis- sion Oak—Flemish Oak—Light and Dark—Golden Oak —Antwerp Oak—^Gray Oak—Dark Oak Stains—An- tique Oak—^Silver-Gray Effects—Trouble in Oak Finishing™Oak Stain Formulas—Stains Various—Etc. Staining Wickerware and Willow Furniture 112 The Equivalents of Water Colors in Aniline Dyes 117 Description of Stains and Their Uses . 118 The Art of Wood Polishing ...... 128 French Polishing—Oil Polishing—Pblish-on-Varnish Finish—Polish Formulast—Polishing in the Lathe Various Polish Formulas. Finishing New Furniture 145 The Gloss Finish—The Rubbed Finish—The Polished Finish—Finishing Cheap New Furniture—Furniture Varnishes—Making Antique Furniture. Refinishing Old Furniture 152 Description of Finishing—Enameled Furniture—Re- polishing—Coloring Up—Furniture Polishes—Doing- Up Old Furniture—Furniture Cream or French Re- polisher—Furniture Revivers—Furniture Renovating Polish—Derby Cream—Wax Stained for Colored Woods—Polish for Good Furniture—Renovating Piano Polish—Cheap Wax Polish—Polish for Statuary, Etc. —Perfuming Polishes and Renovators—Various Furni- ture Polishes—Removing Stains, White Spots, Etc. —Removing Old Varnish—Varnish Remover Formulas —Notes on Varnish Removers. Practical Notes on Varnishing ..... 179 How Varnish Dries—Temperature of Varnishing Room —^Why Varnish Cracks—Cloudy Shellac Varnish How to Varnish—Varnish Turns Green—Heavy Bodied Varnish—Varnish Does Not Flow Freely Difference between Exterior and Interior Varnish Composition of Spar Varnish—Composition of Interior Varnish—Composition of Floor Varnish—How Varnish is Made—China Wood Oil. —— CONTENTS V PAGE Description of Varnishes Used 186 Making Oil Varnishes—Short and Long Oil Varnish- Some Varnish Notes—Aged vs. New Varnish—Effects of Temperature—Qiaracteristics of Good Varnish Heat-Resisting Varnishes—How Many Coats of Var- nish ?—Flatting Varnish—Practical Varnish Notes. Varnish Ills—Cause and Cure 198 Blistering—Blooming—Brush Marks—Blotching—Bub- bling— Brittleness— Chilling— Crimping— Creeping or Crawling—Chipping—Checking—Silking—Sinking In Sweating—Seedy Varnish—Sandy Appearance—Sag- ging—Sissing or Cissing—Tears—Turning White Wrinkling—Pitting or Pinholing--Flatting—Loss of Brilliancy—Skinning Over of Varnish. Shellac Varnish 203 Origin and Gathering of Lac—The Various Grades Pure Shellac—Adulteration of Shellac—Bleached White Shellac—Orange Shellac—Preparing Shellac Varnish Artificial Shellac—Water Shellac—Clear Alcoholic So- lution of Shellac—'White Gum Shellac Specifications- Special Quick Drying Shellac—Applying Shellac in Damp Weather—Chinese Glue—Shellac Varnish Notes. How TO Use the Air-Spray Machine . 224 Information—General and Special . ,231 Sap and Seasoning—Staining the Ends of Boards Shop Economies—Staining Wood before Working Up Imitating Old Mahogany—Mahoganizing Other Woods —Finishing Fireproofed Wood—Staining and Finishing House Trim—Violin Varn,ishing—Piano Finishing Finishing Antique Oak Piano Case—Another Piano Finishing Process—Finishing a Rosewood Case—Me- chanical Varnishing—.How to Prevent Cracking of Varnish—Trouble with Shellac Finish—Imitation of Woods by Printing—-Wood Finishes in Favor—Colum- bian Mahogany—Filling Checks in Veneers—Why the Varnish Sweats—Making and Using the Tacky Rag Ebonizing Piano Keys—Polish for Ebony—Removing Dust before Varnishing—Staining Brown Mahogany Perfume for Renovators, Etc.—Hardening Varnish for Table Tops—Solubility of Varnish Gums—Covering Capacity of Varnish—Finishing Laboratory Table Top —French Artificial Wax—Chamois or Goat Skin — vi CONTENTS TAGE Concerning Sponges—Testing Turpentine—China Wood Oil—Finishers' Supplies Described—The Waxes—Test- ing Varnish—^Preventing Filler from Cracking—Bak- ing Varnish on Wood—Crackle Finish—Finishing Ma- hoganized Birch—Finishing Birch Veneers—Oxalic Acid Preparation—Non-Cracking Linseed Oil—Figure- less Quartered Oak—High Polish on Red Cedar Finishing Birdseye Maple—Wax Finishing Small Articles—Finishing Ouija Boards—Oiled Sandpaper Rubbed vs. Varnished Surfaces—Birdseye Maple Polished End Wood—Ail-Around Varnish—Making Brown Mahogany—Humidity in Finishing Room Toning Down Circassian—Sta,ining Mahogany—Finish- ing Inside of Case Goods—The Curly Woods—How Sandpaper Is Made—How to Use Sandpaper. Varnish Stains 277 How Prepared—Stained Filler—Walnut Varnish Stain —Oak Varnish Stain—Cherry Varnish Stain—Ebony Varnish Stain—Satinwood Varnish Stain—Note. THE EXPERT WOOD FINISHER DESCRIPTION OF THE WOODS USED The process of wood finishing is one of the simplest of the mechanical arts, and yet it demands of the workman a degree of skill not exceeded in any other line of handicrafts. The first requirement is a knowl- edge of woods, their physical structure, so that the treatment necessary to their perfect development of line and color may be understood. Then comes ma- terial and manipulation thereof, the staining and fill- ing of the woods, and the final work of varnishing, rubbing, polishing, etc. Nor is this all, for the finisher must understand the composition and nature of the various stains and pigments he handles, the aniline dyes, the liquids, the mineral and vegetable pigments. While all these matters are fully and carefully de- scribed in this work, yet it will require experience in order to develop the complete workman. Study the instructions given here, and follow them carefully, and in due course you will succeed in mastering the art and becoming a skilled wood-finisher,—if you put heart into your work, for unless one loves his work he never can succeed in becoming its master. I shall first take up the subject of woods. We try to place the woods under two heads, hard and soft, but these are not the most appropriate terms to use, and they are confusing to most of us. There are, bo- tanically, two broad groups of tree species, the decidu- ous or broad-leaved tree, and the evergreen, needle- leaved or coniferous trees. The wood of the most of 1 2 THE EXPERT WOOD FINISHER the former is comparatively hard, and that of the latter mostly soft. The names, hard wood and soft wood, have, therefore, been applied to the two groups, respec- tively. But they are not the best descriptive terms, be- cause such wc^ods as basswood, yellow poplar, and Cot- tonwood, known under the above classification as hard woods, are quite soft ; while such woods as the South- em yellow pines, which are in our soft wood class, are rather hard. Under the head of Wood Filling I have listed two groups of woods under the heads of close- grained and open-grained, which for our purpose is a better classification than that of hard and soft woods. For it is with the matter of grain that we are the most concerned, as it makes very little difference whether a wood is hard or soft, when we have the other list to guide us. Under those heads we find listed sixteen close-grained woods, and eleven open-grained woods. Showing twenty-seven different kinds of wood used hi cabinet and house construction work that are treated by the wood finisher. The finishing of these woods is fully described under appropriate heads, and requires no further description here. Each wood is taken up and its treatment pains- takingly described. And as the reader proceeds he finds all necessary information touching the nature and uses of the different materials that enter into the work on finishing. We will now take up the various woods and describe their characteristics, with some account of their Hfe history. First in importance come the oaks. Oak.—The forester places all the oaks, of which there are many different kinds, in two classes, naming them white and black. The woods of the two groups are structurally different. Of the some seventeen listed in a bulletin issued by the Government only a few interest the wood-worker and finisher. These are the DESCRIPTION OF THE WOODS USED 3 white and the red oaks. True, there are some few others that enter into furniture making and into house trim, but for fuming and staining, only the white and red oaks are desirable. Red oak has several other names, such as mountain oak, black oak, and Spanish oak, it being a member of the black oak group.
Recommended publications
  • Arborite Postforming & General Purpose Laminate
    ARBORITE POSTFORMING & GENERAL PURPOSE LAMINATES TECHNICAL DATA Manufacturer Arborite 385 Lafleur, Lasalle (Québec), H8R 3H7 Web site : www.arborite.com - Phone: 1-800-996-0366 Alternate manufacturing facility – Fletcher, NC Product Description Arborite decorative laminates are a high pressure thermoset plastic surfacing material. It consists of multi layers of kraft (core) papers impregnated with phenolic resins, covered by a melamine impregnated decorative surface. These layers are then consolidated into a solid sheet under the effect of high temperature and pressure. 0.045" / 1.14 mm Basic Decorative High Pressure Laminates – for horizontal and vertical applications Arborite decorative laminates are engineered to improve the product life cycle for wear, chemical and stain resistance under normal use and conditions. Available in 3 grades, Arborite laminates offer 4 exceptional performance features, and are available in Arborite’s expressive range of colors. Arborite Flex 4 grades: . 0.025" / (0.63 mm) - Arborite laminate type A3 . 0.034" / (0.86 mm) - Arborite laminate type A4 . 0.045" / (1.14 mm) - Arborite laminate type A5 Usage For all types of flatwork applications: work surfaces, counters, cabinets, furniture, equipment, food service, displays, caseworks, doors, walls, ceilings, window sills and frames, partition systems, enclosures, shelving and trims. suitable for most commercial, institutional and residential applications. Typical uses by grade: A3 (0.025") for light duty applications - most vertical surfaces such as interior doors, cabinet fronts, wall paneling and similar surfaces. A4 (0.034") & A5 (0.045") for heavier duty applications – work surfaces, counters, table tops, cabinets, furniture, wall paneling, doors, window sills and similar surfaces. Arborite Postforming & General Purpose Laminates 1 Revised: September 2015 Arborite – Features .
    [Show full text]
  • Everything for Perfect Wood Finishing
    Akzo Nobel Hilden GmbH Düsseldorfer Straße 96-100 40721 Hilden Germany Everything for perfect wood finishing Interior portfolio - Quantum Range Wood Coatings Passion for wood www.akzonobel.com AkzoNobel creates everyday essentials to make people’s lives more liveable and inspiring. As a leading global paints and coatings company and a major producer of specialty chemicals, we supply essential ingredients, essential protection and essential color to industries and consumers worldwide. Backed by a pioneering heritage, our innovative products and sustainable technologies are designed to meet the growing demands of our fast-changing planet, while making life eas- ier. Headquartered in Amsterdam, the Nether-lands, we have approximately 45,000 people in around 80 countries, while our portfolio includes well-known brands such as Dulux, Sikkens, Inter-national, Interpon and Eka. Consistently ranked as a leader in sustainability, we are dedicated to energizing cities and communities while creating a protected, colorful world where life is improved by what we do. © 2016 Akzo Nobel Hilden GmbH All rights reserved. AN_XXXXXXXXXXX · Subject to alterations and errors. Contents PU Acrylic, clear Additional products Sealer Hardener Quantum Q-IS160 8 Hardener HPU6300 14 Quantum Q-S170 8 Thinner Top coat Thinner TPU9300 - F 15 Quantum Q-T260-__ 9 Thinner TPU9301 -S 15 Quantum Q-T261-05 9 Quantum Q-T263-90 10 Quantum Q-T280-__ 10 PU Acrylic, pigmented Primer QuantumColor QC-IP350 11 Top coat QuantumColor QC-T460-__- 12 ____ QuantumColor QC-T470-90-____ 12 2 3 Contents PU Acrylic, clear Additional products Sealer Hardener Quantum Q-IS160 8 Hardener HPU6300 14 Quantum Q-S170 8 Thinner Top coat Thinner TPU9300 - F 15 Quantum Q-T260-__ 9 Thinner TPU9301 -S 15 Quantum Q-T261-05 9 Quantum Q-T263-90 10 Quantum Q-T280-__ 10 PU Acrylic, pigmented Primer QuantumColor QC-IP350 11 Top coat QuantumColor QC-T460-__- 12 ____ QuantumColor QC-T470-90-____ 12 2 3 Code-System Learn more about the AkzoNobel Wood Coatings code system.
    [Show full text]
  • Wood Finishing Demonstration Project Final Report
    Wood Finishing Demonstration Project Final Report Paul Pagel Minnesota Technical Assistance Program & Barb Loida Minnesota Pollution Control Agency Small Business Compliance Assistance Program January 1997 Table of Contents INTRODUCTION......................................................................................................................................... 1 FINDING AND SELECTING A CANDIDATE FOR THE PROJECT................................................... 1 THE WOOD FINISHING PROCESS......................................................................................................... 2 PROCESS CONSIDERATIONS AND COMPANY COMPARISONS............................................................................. 2 EMISSIONS AND WASTES ....................................................................................................................... 4 AT PINE-TIQUE ................................................................................................................................................ 4 AT VIKING ....................................................................................................................................................... 5 USE OF WATERBORNE FINISHES......................................................................................................... 6 FINISH CRITERIA AND PROCESS CONSIDERATIONS FOR SELECTING ALTERNATIVE COATINGS ......................... 6 TESTING, MODIFICATIONS AND RESULTS......................................................................................
    [Show full text]
  • Wood-Based Composite Materials Panel Products, Glued-Laminated Timber, Structural Composite Lumber, and Wood–Nonwood Composite Materials Nicole M
    CHAPTER 11 Wood-Based Composite Materials Panel Products, Glued-Laminated Timber, Structural Composite Lumber, and Wood–Nonwood Composite Materials Nicole M. Stark, Research Chemical Engineer Zhiyong Cai, Supervisory Research Materials Engineer Charles Carll, Research Forest Products Technologist The term composite is being used in this chapter to describe Contents any wood material adhesively bonded together. Wood-based Scope 11–2 composites encompass a range of products, from fiberboard Conventional Wood-Based Composite Panels 11–2 to laminated beams. Wood-based composites are used for a number of nonstructural and structural applications in prod- Elements 11–2 uct lines ranging from panels for interior covering purposes Adhesives 11–3 to panels for exterior uses and in furniture and support struc- Additives 11–5 tures in buildings (Fig. 11–1). Maloney (1986) proposed Plywood 11–5 a classification system to logically categorize the array of wood-based composites. The classification in Table 11-1 Oriented Strandboard 11–7 reflects the latest product developments. Particleboard 11–10 The basic element for wood-based composites is the fiber, Fiberboard 11–12 with larger particles composed of many fibers. Elements Speciality Composite Materials 11–15 used in the production of wood-based composites can be Performance and Standards 11–15 made in a variety of sizes and shapes. Typical elements in- Glulam Timber 11–17 clude fibers, particles, flakes, veneers, laminates, or lumber. Figure 11–2 shows the variation and relative size of wood Advantages 11–17 elements. Element size and geometry largely dictate the Types of Glulam Combinations 11–17 product manufactured and product performance.
    [Show full text]
  • Removing the Old Finish Wood Finishing Dr
    Fact Sheet #3 Removing the Old Finish Wood Finishing Dr. Leona K. Hawks & Refinishing Home Furnishings and Housing Specialist 1995 HI 23 Introduction A successful refinishing job depends upon the care and the thoroughness with which the old finish is removed. Commercial paint removers are the most effective materials available to use in removing old finishes. Read the label to see what kind of finish the paint remover will soften. The heavy-duty or premium grades that soften epoxy will soften the old finish faster and save you time. Safety Practices When dealing with potentially harmful paint removing chemicals, there are some safety practices that should be followed: 1. Work in a well-ventilated room. 2. Store all wood refinishing chemicals away from children and animals. 3. Avoid all contact of products with skin and eyes by wearing rubber gloves, old clothes with long sleeves, and glasses. 4. Always open the lid of the paint remover slowly to allow pressure to escape. When stored for long periods of time, excessive pressure builds up in the container and opening rapidly may cause the remover to spray the user. 5. Never apply finishing chemicals in a room where there is an open flame or a pilot light. 6. If at all possible, select a nonflammable paint remover. 7. Clean brushes and discard rags soaked with paint remover. Prior Preparation Prior to stripping wood furniture, there are some things you should do to get ready: 1. Spread work area with layers of newspaper for protection. 2. Remove hardware such as handles, drawer pulls, knobs, and hinges.
    [Show full text]
  • Aqualitrange R Portfolio- Contents
    Akzo Nobel Hilden GmbH Düsseldorfer Straße 96-100 40721 Hilden Germany Everything for perfect wood finishing Interior portfolio - Aqualit Range Wood Coatings Passion for wood www.akzonobel.com AkzoNobel creates everyday essentials to make people’s lives more liveable and inspiring. As a leading global paints and coatings company and a major producer of specialty chemicals, we supply essential ingredients, essential protection and essential color to industries and consumers worldwide. Backed by a pioneering heritage, our innovative products and sustainable technologies are designed to meet the growing demands of our fast-changing planet, while making life eas- ier. Headquartered in Amsterdam, the Nether-lands, we have approximately 45,000 people in around 80 countries, while our portfolio includes well-known brands such as Dulux, Sikkens, Inter-national, Interpon and Eka. Consistently ranked as a leader in sustainability, we are dedicated to energizing cities and communities while creating a protected, colorful world where life is improved by what we do. © 2016 Akzo Nobel Hilden GmbH All rights reserved. AN_XXXXXXXXXXX · Subject to alterations and errors. Contents PUWaterborne, Acrylic, clear clear Additional products Sealer Hardener Aqualit A-IS180 8 Hardener HWA6000 14 Aqualit A-S150 8 Thinner Sandoseal 199 Thinner TWA9000 - F 15 Top coat Aqualit A-T250-__ 9 Supercryl Aqualit A-T260-__ 9 Aqualit A-T280-90 10 Aqualit A-T280-__ 10 Waterborne, pigmented Primer AqualitColor AC-IP360 11 AqualitColor AC-P340 11 Aqua Surf 136 Top coat AqualitColor
    [Show full text]
  • 10 Step Guide to Wood Finishing
    Westfarthing Woodworks 10 Step Guide To Wood Finishing Copyright Westfarthing Woodworks LLC 2014 This work may be printed, handed out, linked to, and freely distributed as long as it re- mains in original form without any deletions, additions, or omissions. Please reference the source when linking and distributing, and best of luck in all your woodworking ad- ventures. This booklet and others can be found at westfarthingwoodworks.com 1 If you like this guide... My Books Are On Amazon Acoustic Guitar Making: How to Make Tools Templates and Jigs is a reference guide for many aspects of acoustic guitar making. The book covers making blanks, making tools instead of buying them, how small changes affect tone, and a thorough finishing section. This is a 508 page monster of a book, and it can be used as a reference for the guitar maker. This is not an ABC book, but a companion that teaches many of the things that the other step by step books leave out, or do not cover as thoroughly. For the be- ginning and the intermediate guitar maker, this book can be quite a resource. Click on the book cover and you can see more information and reviews on Amazon. Wooden Rings: How to Make Wooden Rings by Hand is my second book, and it has step by step instructions and photo examples of over 50 rings that even those with lim- ited woodworking experience can make. The instructions are written for basic tools which anyone can afford, though power tools can also be used if available.
    [Show full text]
  • Oil Finishes for Wood by James Vincent Doody, Jr
    Thoughts on Oil Finishes for Wood by James Vincent Doody, Jr. Downloaded from Badger Pond On Surface Preparation: ♦ Getting a "glass-smooth" finish isn't especially tricky, but it has much less to do with finishing materials and technique than with adequate surface preparation. Plane, scrape, and sand (but do not burnish) the wood until it is perfectly flat and smooth. When not to use an Oil Finish: ♦ Open-pored woods like mahogany and oak need to be sealed, sanded, resealed, and then filled with a (possibly colored) paste or liquid filler to support a glass-smooth finish. I don't see people even try with oak but mahogany can look lovely and glossy with proper scraping, sealing, sanding, filling, resanding and then coating with shellac, French Polish, or lacquer. It's a lot of painstaking work! On Applying an Oil Finish: ♦ Closed-pore, tight-grained woods like cherry, birch, and maple don't need the sanding sealer and filler step at all and will let you just work up to 320 grit sandpaper before applying any finishing material. Contrary to common myth, an oil finish can produce just as high a luster as lacquer, shellac, or [shudder] varnish. Apply a coat of thinned "Danish Oil" liberally and wipe dry after 30 minutes. You'll cringe when you notice that your painstakingly sanded surface is no longer smooth because the liquid has raised the grain a bit. ♦ Take 0000 steel wool lubricated with mineral spirit or even some of the thinned oil and smooth it back down. Use some elbow grease! Wipe dry.
    [Show full text]
  • Green Oak in Construction
    Green oak in construction Green oak in construction by Peter Ross, ARUP Christopher Mettem, TRADA Technology Andrew Holloway, The Green Oak Carpentry Company 2007 TRADA Technology Ltd Chiltern House Stocking Lane Hughenden Valley High Wycombe Buckinghamshire HP14 4ND t: +44 (0)1494 569600 f: +44 (0)1494 565487 e: [email protected] w: www.trada.co.uk Green oak in construction First published in Great Britain by TRADA Technology Ltd. 2007 Copyright of the contents of this document is owned by TRADA Technology Ltd, Ove Arup and Partners (International) Ltd, and The Green Oak Carpentry Company Ltd. © 2007 TRADA Technology Ltd, Ove Arup and Partners (International) Ltd, and The Green Oak Carpentry Company Ltd. All rights reserved. No copying or reproduction of the contents is permitted without the consent of TRADA Technology Ltd. ISBN 978-1900510-45-5 TRADA Technology and the Consortium of authoring organisations wish to thank the Forestry Commission, in partnership with Scottish Enterprise, for their support in the preparation of this book. The views expressed in this publication are those of the authors and do not necessarily represent those of the Forestry Commission or Scottish Enterprise. Building work involving green oak must comply with the relevant national Building Regulations and Standards. Whilst every effort has been made to ensure the accuracy of the advice given, the Publisher and the Authors, the Forestry Commission and Scottish Enterprise cannot accept liability for loss or damage arising from the information supplied. The assistance of Patrick Hislop, BA (Hons), RIBA, consultant architect, TRADA Technology Ltd as specialist contributor is also acknowledged.
    [Show full text]
  • Wood Staining Staining & & Finishing Finishing
    FINISH TOUCH BRO 1109_V6.qxd:FINISH TOUCH BRO_1109 11/24/09 6 A Complete Guide Guide to Wood Staining Staining & & Finishing Finishing Includes: Door Finishing Finishing & & Wood Wood Graining Instructions FINISH TOUCH BRO 1109_V6.qxd:FINISH TOUCH BRO_1109 11/24/09 6 GettingGetting Started Started Keep These Suggestions in Mind: 1. Always read the label! Follow all label directions exactly to ensure a successful wood finishing project. Pay particular attention to all “DANGER and CAUTION” instructions. 2. Protect your work area by laying lined drop cloths, cardboard or plastic over the floor area. 3. Be sure the area is warm and dry and it has adequate ventilation and good lighting. Pre-Plan for a Successful Project For best results have everything you need before you start. The condition of the wood you are finishing will help you decide what materials you need to do the job, such as scrapers, brushes, sandpaper, stir sticks, etc. New Bare Wood You may prefer to stain the wood and apply a polyurethane, or you can simply apply the polyurethane over the natural wood. Old Clear Finishes in Good Condition A finish in good condition can be covered with a fresh coat of polyurethane once the surface has been cleaned and properly sanded. UGL® Professional Strength D-Gloss Water-Based Liquid Sander & Cleaner Prepares surfaces for recoating. Removes surface contaminants and provides a slight “etching” of the surface allowing subsequent coatings to bond. Dulls paint, enamel, varnish and polyurethane. Some polyurethane finishes do not adhere to shellac or lacquer surfaces. It is advisable to remove these finishes before recoating.
    [Show full text]
  • Wood Finishing Basics
    Wood Finishing Basics APPLICATION TECHNIQUES & PRODUCT SELECTION GETTING STARTED Your home is a unique expression of your individual Before starting any wood finishing project it is important decorating taste. And what better way to display your to have a proper workspace and supplies. When creating style than through the warmth and beauty of natural the ideal area please keep the following in mind: wood? From traditional to contemporary and everywhere • The work station must have adequate light. in-between, the possibilities are endless! Wood’s natural • Always work in a well ventilated area. warmth and beauty add richness and character. And with • The workspace should be dry and warm. If the area is ® a little know-how and Minwax stains and finishes, it’s cool or damp it may alter the dry times indicated on the easier than you think to create a statement of style. labels. In this guide, author and craftsman, Bruce Johnson, There are a number of items frequently used in wood pairs application tips and techniques with product finishing projects. This list does not include all the supplies needed, but what is most commonly used. recommendations that best enhance the beauty of wood Always consult the label of the Minwax® products you are in your home. This booklet will take you through the wood using to see if special application tools are required. finishing process including preparation, staining and topcoating, as well as maintenance of your wood pieces. Rags Stir Sticks Whether you are a beginner or a seasoned do-it-yourselfer, Brushes Safety Glasses these ideas will help you achieve beautiful results with ease.
    [Show full text]
  • Common Wood Species How to Identify Them, Where You’Ll Find Them—And How to (Re)Finish Them
    34 THE FURNITURE BIBLE common wood species How to identify them, where you’ll find them—and how to (re)finish them. WOOD COLOR CHARACTERISTICS SEEN ON USED FOR RECOMMENDED TREATMENTS almond Rich reddish blond Fine grain Louis XIV Rare cabinetry Fine finishes; polishes applewood Pinkish blond Sinuous grain American Colonial; William and Mary Rich inlay; marquetry Polishes; oil ash White to pale brown Sinuous, open grain American Colonial; Biedermeier Rustic furniture Wax; ceruse beech Blond Fine, linear grain Louis XV; Gustavian; Biedermeier Frames Paint; bleaching; staining; oil birch Pale blond with reddish streaks Hardwood with a fine, sinuous grain Gustavian; Shaker; Biedermeier Almost all furniture Staining; oil rub and wax boxwood Blond Very dense; no grain Louis XIV; Second Empire Precious carvings; turning; inlay Clear wax; oil rub Walnut burl: contrasted browns; Highly figured Louis XIV; Art Deco Precious veneer High-gloss finishes; French polish burls Elm and Circassian walnut burl: blond (burls are knots and roots) Lightweight and resinous; “Syrian” furniture; Spanish Colonial; Light reddish brown Trunks and wardrobes Avoid finishing! cedar and cypress insect-repellent American Colonial American Colonial; Queen Anne; Uniform, straight, fine grain with a Large furniture such as armoires, Rich reddish brown Louis XV; Chippendale; Shaker; Oil and wax; shellac smooth texture; darkens with age tables, and buffets cherry Federal; Biedermeier Large furniture such as armoires, Warm brown with a hint of red Rustic texture and grain Rustic
    [Show full text]