The Properties of Light: Fresnel Lighthouse Lens Source: (U.S

Total Page：16

File Type：pdf, Size：1020Kb

The Properties of Light: Fresnel Lighthouse Lens Source: (U.S

The Properties of Light: Fresnel Lighthouse Lens Source: https://uslhs.org/sites/default/files/assets/The_Lighthouse_Story.pdf (U.S. Lighthouse Society) Display selected images of Fresnel lenses http://www.splka.org/little.html https://uslhs.org/history/fresnel-lenses Principles 1. Light travels in a straight line if it is not interrupted. 2. When light strikes a surface, it can be reflected, transmitted, or absorbed, or a combination of all three. 3. Light travels through some objects but not through others. Exercises a. Use a flashlight to explain the principle of reflection, which is used in the parabolic reflector. The silver reflector behind the bulb acts like a mirror, concentrating more light outward, which increases the brightness of the light. b. Shine the flashlight on an opaque object, such as a desk; this will block the light. The object absorbs (assimilates or takes in) the light. c. Shine the flashlight through a drinking glass, a transparent object (one that lets the light pass through). Most of the light will be transmitted (transferred or passed along). d. Using a prism, run the beam of the flashlight horizontally across the room. Place the prism in front of the beam, and it will reflect (bend) the light, breaking its normal path and causing it to shine on the ceiling, spreading out in all directions. This demonstrates the principle of the Fresnel lens. The prisms and convex lens (curved outwards) work two ways; their shape and location also influence their effectiveness. The convex lens refracts (bends or slants) the rays of light as they pass through. The prisms first refract and then reflect (throw out) the light as it passes through (see diagram below). https://jrogel.com/quantum-tunnel-answers-fresnel-lens/ e. Compare the shapes of a traditional convex lens and the much thinner, lighter Fresnel lens: https://www.edmundoptics.com/knowledge-center/application-notes/optics/advantages-of-fresnel-lenses/ Video clip explaining the function of the Fresnel lens and comparing it to a traditional convex lens: https://www.youtube.com/watch?v=VyQAg4j-7K4 f. The Fresnel lens was produced in six sizes, called “orders.” The largest Fresnel lenses, such as the first-order lens, generally were reserved for large coastal lighthouses, and their light shines the farthest. The smallest sixth-order lenses generally marked a small harbor and have the shortest range. The diagram below illustrates the relative size of the six Fresnel lens sizes: www.nps.org A first-order lens is over eight feet tall and weighs over 12,000 pounds. A sixth-order lens, on the other hand, is about 1½ feet tall and weighs between 65 and 220 pounds. Michigan Science Content Expectations K-2-ETS1-2 Michigan Science Content Expectations K-2-ETS1-3 Michigan Science Content Expectations 4-PS3-2 Michigan Science Content Expectations 4-PS4-2 .

Copy Link

Recommended publications

Growing up in the Old Point Loma Lighthouse (Teacher Packet)
Growing Up in the Old Point Loma Lighthouse Teacher Packet Program: A second grade program about living in the Old Point Loma Lighthouse during the late 1800s, with emphasis on the lives and activities of children. Capacity: Thirty-five students. One adult per five students. Time: One hour. Park Theme to be Interpreted: The Old Point Loma Lighthouse at Cabrillo National Monument has a unique history related to San Diego History. Objectives: At the completion of this program, students will be able to: 1. List two responsibilities children often perform as a family member today. 2. List two items often found in the homes of yesterday that are not used today. 3. State how the lack of water made the lives of the lighthouse family different from our lives today. 4. Identify two ways lighthouses help ships. History/Social Science Content Standards for California Grades K-12 Grade 2: 2.1 Students differentiate between things that happened long ago and things that happened yesterday. 1. Trace the history of a family through the use of primary and secondary sources, including artifacts, photographs, interviews, and documents. 2. Compare and contrast their daily lives with those of their parents, grandparents, and / or guardians. Meeting Locations and Times: 9:45 a.m. - Meet the ranger at the planter in front of the administration building. 11:00 a.m. - Meet the ranger at the garden area by the lighthouse. Introduction: The Old Point Loma Lighthouse was one of the eight original lighthouses commissioned by Congress for service on the West Coast of the United States.
[Show full text]
Determination of Focal Length of a Converging Lens and Mirror
Physics 41- Lab 5 Determination of Focal Length of A Converging Lens and Mirror Objective: Apply the thin-lens equation and the mirror equation to determine the focal length of a converging (biconvex) lens and mirror. Apparatus: Biconvex glass lens, spherical concave mirror, meter ruler, optical bench, lens holder, self-illuminated object (generally a vertical arrow), screen. Background In class you have studied the physics of thin lenses and spherical mirrors. In today's lab, we will analyze several physical configurations using both biconvex lenses and concave mirrors. The components of the experiment, that is, the optics device (lens or mirror), object and image screen, will be placed on a meter stick and may be repositioned easily. The meter stick is used to determine the position of each component. For our object, we will make use of a light source with some distinguishing marking, such as an arrow or visible filament. Light from the object passes through the lens and the resulting image is focused onto a white screen. One characteristic feature of all thin lenses and concave mirrors is the focal length, f, and is defined as the image distance of an object that is positioned infinitely far way. The focal lengths of a biconvex lens and a concave mirror are shown in Figures 1 and 2, respectively. Notice the incoming light rays from the object are parallel, indicating the object is very far away. The point, C, in Figure 2 marks the center of curvature of the mirror. The distance from C to any point on the mirror is known as the radius of curvature, R.
[Show full text]
How Does the Light Adjustable Lens Work? What Should I Expect in The
How does the Light Adjustable Lens work? The unique feature of the Light Adjustable Lens is that the shape and focusing characteristics can be changed after implantation in the eye using an office-based UV light source called a Light Delivery Device or LDD. The Light Adjustable Lens itself has special particles (called macromers), which are distributed throughout the lens. When ultraviolet (UV) light from the LDD is directed to a specific area of the lens, the particles in the path of the light connect with other particles (forming polymers). The remaining unconnected particles then move to the exposed area. This movement causes a highly predictable change in the curvature of the lens. The new shape of the lens will match the prescription you selected during your eye exam. What should I expect in the period after cataract surgery? Please follow all instructions provided to you by your eye doctor and staff, including wearing of the UV-blocking glasses that will be provided to you. As with any cataract surgery, your vision may not be perfect after surgery. While your eye doctor selected the lens he or she anticipated would give you the best possible vision, it was only an estimate. Fortunately, you have selected the Light Adjustable Lens! In the next weeks, you and your eye doctor will work together to optimize your vision. Please make sure to pay close attention to your vision and be prepared to discuss preferences with your eye doctor. Why do I have to wear UV-blocking glasses? The UV-blocking glasses you are provided with protect the Light Adjustable Lens from UV light sources other than the LDD that your doctor will use to optimize your vision.
[Show full text]
U.S. Lake Erie Lighthouses
U.S. Lake Erie Lighthouses Gretchen S. Curtis Lakeside, Ohio July 2011 U.S. Lighthouse Organizations • Original Light House Service 1789 – 1851 • Quasi-military Light House Board 1851 – 1910 • Light House Service under the Department of Commerce 1910 – 1939 • Final incorporation of the service into the U.S. Coast Guard in 1939. In the beginning… Lighthouse Architects & Contractors • Starting in the 1790s, contractors bid on LH construction projects advertised in local newspapers. • Bids reviewed by regional Superintendent of Lighthouses, a political appointee, who informed U.S. Treasury Dept of his selection. • Superintendent approved final contract and supervised contractor during building process. Creation of Lighthouse Board • Effective in 1852, U.S. Lighthouse Board assumed all duties related to navigational aids. • U.S. divided into 12 LH districts with inspector (naval officer) assigned to each district. • New LH construction supervised by district inspector with primary focus on quality over cost, resulting in greater LH longevity. • Soon, an engineer (army officer) was assigned to each district to oversee construction & maintenance of lights. Lighthouse Bd Responsibilities • Location of new / replacement lighthouses • Appointment of district inspectors, engineers and specific LH keepers • Oversight of light-vessels of Light-House Service • Establishment of detailed rules of operation for light-vessels and light-houses and creation of rules manual. “The Light-Houses of the United States” Harper’s New Monthly Magazine, Dec 1873 – May 1874 … “The Light-house Board carries on and provides for an infinite number of details, many of them petty, but none unimportant.” “The Light-Houses of the United States” Harper’s New Monthly Magazine, Dec 1873 – May 1874 “There is a printed book of 152 pages specially devoted to instructions and directions to light-keepers.
[Show full text]
Holographic Optics for Thin and Lightweight Virtual Reality
Holographic Optics for Thin and Lightweight Virtual Reality ANDREW MAIMONE, Facebook Reality Labs JUNREN WANG, Facebook Reality Labs Fig. 1. Left: Photo of full color holographic display in benchtop form factor. Center: Prototype VR display in sunglasses-like form factor with display thickness of 8.9 mm. Driving electronics and light sources are external. Right: Photo of content displayed on prototype in center image. Car scenes by komba/Shutterstock. We present a class of display designs combining holographic optics, direc- small text near the limit of human visual acuity. This use case also tional backlighting, laser illumination, and polarization-based optical folding brings VR out of the home and in to work and public spaces where to achieve thin, lightweight, and high performance near-eye displays for socially acceptable sunglasses and eyeglasses form factors prevail. virtual reality. Several design alternatives are proposed, compared, and ex- VR has made good progress in the past few years, and entirely perimentally validated as prototypes. Using only thin, flat films as optical self-contained head-worn systems are now commercially available. components, we demonstrate VR displays with thicknesses of less than 9 However, current headsets still have box-like form factors and pro- mm, fields of view of over 90◦ horizontally, and form factors approach- ing sunglasses. In a benchtop form factor, we also demonstrate a full color vide only a fraction of the resolution of the human eye. Emerging display using wavelength-multiplexed holographic lenses that uses laser optical design techniques, such as polarization-based optical folding, illumination to provide a large gamut and highly saturated color.
[Show full text]
Davis Vision's Contact Lens Benefits FAQ's
Davis Vision’s Contact Lens Benefits FAQ’s for Council of Independent Colleges in Virginia Benefits Consortium, Inc. How your contact lens benefit works when you visit a Davis Vision network provider. As a Davis Vision member, you are entitled to receive contact lenses in lieu of eyeglasses during your benefit period. When you visit a Davis Vision network provider, you will first receive a comprehensive eye exam (which requires a $15 copayment) to determine the health of your eyes and the vision correction needed. If you choose to use your eyewear benefit for contacts, your eye care provider or their staff will need to further evaluate your vision care needs to prescribe the best lens options. Below is a summary of how your contact lens benefit works in the Davis Vision plan. What is the Davis Vision Contact you will have a $60 allowance after a $15 copay plus Lens Collection? 15% discount off of the balance over that amount. You will also receive a $130 allowance toward the cost of As with eyeglass frames, Davis Vision offers a special your contact lenses, plus 15% discount/1 off of the balance Collection of contact lenses to members, which over that amount. You will pay the balance remaining after greatly minimizes out-of-pocket costs. The Collection your allowance and discounts have been applied. is available only at independent network providers that also carry the Davis Vision Collection frames. Members may also choose to utilize their $130 allowance You can confirm which providers carry Davis Vision’s towards Non-Collection contacts through a provider’s own Collection by logging into the member website at supply.
[Show full text]
Lighthouses of the Western Great Lakes a Web Site Researched and Compiled by Terry Pepper
A Publication of Friends of Sleeping Bear Dunes © 2011, Friends of Sleeping Bear Dunes, P.O. Box 545, Empire, MI 49630 www.friendsofsleepingbear.org [email protected] Learn more about the Friends of Sleeping Bear Dunes, our mission, projects, and accomplishments on our web site. Support our efforts to keep Sleeping Bear Dunes National Lakeshore a wonderful natural and historic place by becoming a member or volunteering for a project that can put your skills to work in the park. This booklet was compiled by Kerry Kelly, Friends of Sleeping Bear Dunes. Much of the content for this booklet was taken from Seeing the Light – Lighthouses of the Western Great Lakes a web site researched and compiled by Terry Pepper www.terrypepper.com. This web site is a great resource if you want information on other lighthouses. Other sources include research reports and photos from the National Park Service. Information about the Lightships that were stationed in the Manitou Passage was obtained from David K. Petersen, author of Erhardt Peters Volume 4 Loving Leland. http://blackcreekpress.com. Extensive background information about many of the residents of the Manitou Islands including a well- researched piece on the William Burton family, credited as the first permanent resident on South Manitou Island is available from www.ManitouiIlandsArchives.org. Click on the Archives link on the left. 2 Lighthouses draw us to them because of their picturesque architecture and their location on beautiful shores of the oceans and Great Lakes. The lives of the keepers and their families fascinate us as we try to imagine ourselves living an isolated existence on a remote shore and maintaining the light with complete dedication.
[Show full text]
Mount Desert Rock Light
Lighthouse - Light Station History Mount Desert Rock Light State: Maine Town: Frenchboro Year Established: August 25, 1830 with a fixed white light Location: Twenty-five miles due south of Acadia National Park GPS (Global Positioning System) Latitude, Longitude: 43.968764, -68.127797 Height Above Sea Level: 17’ Present Lighthouse Built: 1847 – replaced the original wooden tower Architect: Alexander Parris Contractor: Joseph W. Coburn of Boston Height of Tower: 58’ Height of Focal Plane: 75’ Original Optic: 1858 - Third-order Fresnel lens Present Optic: VRB-25 Automated: 1977 Keeper’s House – 1893 Boathouse - 1895 Keeper History: Keeper 1872 – 1881: Amos B. Newman (1830-1916) Disposition: Home of College of the Atlantic’s Edward McC. Blair Marine Research Station. Mount Desert Rock is a remote, treeless island situated approximately 25 nautical miles south of Bar Harbor, Maine. "…Another important Maine coast light is on Mount Desert Rock. This is one of the principal guides to Mount Desert Island, and into Frenchman's and Blue Hill Bays on either side. This small, rocky islet which is but twenty feet high, lies seventeen and one half miles southward of Mount Desert Island, eleven and one half miles outside of the nearest island and twenty-two miles from the mainland. It is one of the most exposed lighhouse locations on our entire Atlantic coast. The sea breaks entirely over the rock in heavy gales, and at times the keepers and their families have had to retreat to the light tower to seek refuge from the fury of the storms. This light first shone in 1830.
[Show full text]
Lecture 37: Lenses and Mirrors
Lecture 37: Lenses and mirrors • Spherical lenses: converging, diverging • Plane mirrors • Spherical mirrors: concave, convex The animated ray diagrams were created by Dr. Alan Pringle. Terms and sign conventions for lenses and mirrors • object distance s, positive • image distance s’ , • positive if image is on side of outgoing light, i.e. same side of mirror, opposite side of lens: real image • s’ negative if image is on same side of lens/behind mirror: virtual image • focal length f positive for concave mirror and converging lens negative for convex mirror and diverging lens • object height h, positive • image height h’ positive if the image is upright negative if image is inverted • magnification m= h’/h , positive if upright, negative if inverted Lens equation 1 1 1 푠′ ℎ′ + = 푚 = − = magnification 푠 푠′ 푓 푠 ℎ 푓푠 푠′ = 푠 − 푓 Converging and diverging lenses f f F F Rays refract towards optical axis Rays refract away from optical axis thicker in the thinner in the center center • there are focal points on both sides of each lens • focal length f on both sides is the same Ray diagram for converging lens Ray 1 is parallel to the axis and refracts through F. Ray 2 passes through F’ before refracting parallel to the axis. Ray 3 passes straight through the center of the lens. F I O F’ object between f and 2f: image is real, inverted, enlarged object outside of 2f: image is real, inverted, reduced object inside of f: image is virtual, upright, enlarged Ray diagram for diverging lens Ray 1 is parallel to the axis and refracts as if from F.
[Show full text]
Point Cabrillo Light Station, California • Hoy Low and Hoy High Lighthouses • Our Sister Service • Russian Lighthouses 1870 – 2005
TH THEE KKEEPE E E P E RR’ S’ S VOLUME XXIII NUMBER FOUR, 2007 • Point Cabrillo Light Station, California • Hoy Low and Hoy High Lighthouses • Our Sister Service • Russian Lighthouses 1870 – 2005 Reprinted from U. S. Lighthouse Society’s The Keeper’s Log – Summer 2007 <www.uslhs.org> Reprinted from the U. S. Lighthouse Society’s The Keeper’s Log – Summer 2007 <www.uslhs.org> Point Cabrillo Light Station, California By Bruce Rogerson and James Kimbrell n terms of age Point Cabrillo Light Station is a mere youngster, having first been lit in June 1909. However, the location I of the lighthouse on a fifty-foot bluff two miles north of Mendocino Village on the rugged coast of northern California is of great historic significance. Less than half a mile to the north lies Frolic Cove, the site of one of the most important ship wrecks on the Pacific Coast. Two miles to the south, at the mouth of Big River, is the site of the first lumber mill on the Mendocino Coast. Point Cabrillo is named for Juan Rodri- guez Cabrillo, the earliest European navigator and explorer to visit the Pacific Coast of Cali- fornia. One of his lieutenants is reported to have sailed this coast in 1542 and to have named Cape Mendocino after the Spanish Governor of New Spain or Mexico, Antonio de Mendoza. Early 19th Century Portuguese settlers and fishermen in nearby Fort Bragg, who claim Cabrillo as one their countrymen, may have given the name to the headland and subsequently to the Light Station.
[Show full text]
Super-Resolution Imaging by Dielectric Superlenses: Tio2 Metamaterial Superlens Versus Batio3 Superlens
hv photonics Article Super-Resolution Imaging by Dielectric Superlenses: TiO2 Metamaterial Superlens versus BaTiO3 Superlens Rakesh Dhama, Bing Yan, Cristiano Palego and Zengbo Wang * School of Computer Science and Electronic Engineering, Bangor University, Bangor LL57 1UT, UK; [email protected] (R.D.); [email protected] (B.Y.); [email protected] (C.P.) * Correspondence: [email protected] Abstract: All-dielectric superlens made from micro and nano particles has emerged as a simple yet effective solution to label-free, super-resolution imaging. High-index BaTiO3 Glass (BTG) mi- crospheres are among the most widely used dielectric superlenses today but could potentially be replaced by a new class of TiO2 metamaterial (meta-TiO2) superlens made of TiO2 nanoparticles. In this work, we designed and fabricated TiO2 metamaterial superlens in full-sphere shape for the first time, which resembles BTG microsphere in terms of the physical shape, size, and effective refractive index. Super-resolution imaging performances were compared using the same sample, lighting, and imaging settings. The results show that TiO2 meta-superlens performs consistently better over BTG superlens in terms of imaging contrast, clarity, field of view, and resolution, which was further supported by theoretical simulation. This opens new possibilities in developing more powerful, robust, and reliable super-resolution lens and imaging systems. Keywords: super-resolution imaging; dielectric superlens; label-free imaging; titanium dioxide Citation: Dhama, R.; Yan, B.; Palego, 1. Introduction C.; Wang, Z. Super-Resolution The optical microscope is the most common imaging tool known for its simple de- Imaging by Dielectric Superlenses: sign, low cost, and great flexibility.
[Show full text]
History of Lighthouses Powerpoint
History of Lighthouses Who needs ‘em? 2 Costa Concordia, 2012 3 4 The main purpose of lighthouses is as an aid to navigation. 4 5 6 History of Lighthouses Light sources: an evolution of technologies. 7 Lighthouses started simply 8 Early Eddystone Light 9 Pan and Wick 10 11 Wick Lamps Incandescent Oil Vapor (IOV) Lamp 12 Auto-changers 13 DCB-224 Aero Beacon 14 Umpqua River 1895 15 Point Loma LED Installation: $4.60 a day to 0.48 per day to operate 16 History of Lighthouses Ancient Roman Medieval Modern Era United States California History of Lighthouses Ancient Times Before lighthouses • Hard for us to appreciate the night time darkness of Ancient Times • Beacon fires on hilltops or beaches - guided mariners and warned of dangers • Earliest references made in 8th Century BC in Homer’s Illiad and Oddyssey Phoenicians • Phoenicians traded around the Mediterranean and possibly as far as Great Britain • Routes marked with “lighthouses”- wood fires or torches • After 1st century: candles or oil lamps enclosed with glass or thin horn panes Colossus of Rhodes Ancient wonders: Colossus of Rhodes (Greece) • Bronze statue of Helios, Greek god of sun • In 292 BC the statue was completed • Took 12 years to build • 100 feet high on island in harbor of Rhodes • Reported to have fires inside the head visible through its eyes • Destroyed by earthquake in 244 BC Pharos • On the island of Pharos in Alexandria, Greece • Completed in 280 BC • Estimated height 400 feet • Three levels • Square level 236’ high and 100’ square • Octagonal story 115’ high • Cylindrical tier 85’ high • Brazier with fire on top • Spiral ramp to the top • Fine quality stone cemented together with melted lead • Ptolomy II, Macedonian ruler of Egypt and architect, Sostratus of Cnidus • Damaged in 641 AD when Alexandria fell to Islamic troops • Destroyed by earthquake in 1346 • Ruble used in Islamic fortress in 1477 • (Lighthouse in French is phare and faro in Spanish) History of Lighthouses Roman Times Roman Empire • Romans also used lighthouses as they expanded their empire.
[Show full text]