DOCSLIB.ORG

Dell Ultrasharp UP3218K User's Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Dell Ultrasharp UP3218K User's Guide Dell UltraSharp UP3218K User’s Guide Model: UP3218K Regulatory model: UP3218Kt NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017-2020 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies. 2020 – 11 Rev. A05 Contents About Your Monitor ..................................... 5 Package Contents . 5. Product Features . .6 . Identifying Parts and Controls . .7 . Monitor Specifications. 10 Plug-and-Play . 16 LCD Monitor Quality and Pixel Policy. 16 Setting Up the Monitor................................... 17 Attaching the Stand . .17 . Using the Tilt, Swivel, and Vertical Extension . 19 . Adjusting the Rotation Display Settings of Your System . .20 Connecting Your Monitor. 20 Organizing Your Cables . 24 Removing the Monitor Stand. 24 Wall Mounting (Optional) . 25 Operating the Monitor .................................. 26 Turning on the Monitor . .26 . Using the Front Panel Controls . 26. Using the On-Screen Display (OSD) Menu . 29 Troubleshooting ....................................... 43 Self-Test . .43 . Contents | 3 Built-in Diagnostics . 44. Common Problems. 45 Product Specific Problems . 46. Appendix .............................................. 47 Safety Instructions . 47. FCC Notices (U.S. only) and Other Regulatory Information . .47 Contacting Dell . 47 EU product database for energy label and product information sheet . 48 Setting Up Your Monitor . .48 . Maintenance Guidelines. 50 4 | Contents About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. Monitor Stand Power cable (varies by country) DP cable (DP to DP) x 2 pcs About Your Monitor | 5 USB 3.0 upstream cable (enables the USB ports on the monitor) Cleaning cloth • Quick Setup Guide • Safety and Regulatory Information • Factory Calibration Report Product Features The Dell UltraSharp UP3218K monitor has an active matrix, TFT-LCD (Color Active Matrix Liquid Crystal Display with a (WLED) The matrix employs Oxide Thin Film Transistor as the active element) and LED backlight. The monitor features include: • 80.01 cm (31.5-inch) active area display (Measured diagonally) QUHD 7680 x 4320 resolution, plus full-screen support for lower resolutions. • Wide viewing angles with Adobe RGB 100%, DCI 98% color. • Tilt, swivel, pivot and vertical extension adjustment capabilities. • Removable pedestal and Video Electronics Standards Association (VESA™) 100 mm mounting holes for flexible mounting solutions. • Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier set up with an elegant viewing experience. • Dual DP to support 7680 x 4320 @ 60Hz. • Support for Displayport version DP1.4. • Plug and play capability if supported by your system. • On-Screen Display (OSD) adjustments for ease of set-up and screen optimization. • Security lock slot. • Asset Management Capability. • Energy Star Certified. • EPEAT registered where applicable. EPEAT registration varies by country. See www.epeat.net for registration status by country. • RoHS compliant. • BFR/PVC Free monitor (excluding cables). • Arsenic-Free glass and Mercury Free for Panel only. • Energy Gauge shows the energy level being consumed by the monitor in real time. • ≤ 0.3 W in Standby Mode. 6 | About Your Monitor Identifying Parts and Controls Front view Label Description 1 Function buttons (For more information, see Operating the Monitor) 2 Power on/off button (with LED indicator) About Your Monitor | 7 Back View Label Description Use 1 VESA mountiong holes (100 mm x 100 Wall mount monitor using VESA- mm-behind attached VESA cover) compatible wall mount kit (100 mm x 100 mm). 2 Regulatory label Lists the regulatory approvals. 3 Stand release button Release stand from monitor. 4 Barcode, serial number, and Service Refer to this label if you need to contact Dell Tag label for technical support. 5 LED touch PAD Stand is fixed while DELL Logo light on. 6 Cable management hole Use to organize cables by placing them through the hole. 8 | About Your Monitor Bottom View Label Description Use 1 Security lock slot Secures monitor with security cable lock (sold separately). 2 AC power connector To connect the monitor power cable. 3a DisplayPort in connector 1 Connect both connectors to your computer with a pair of: • DP to DP cables 3b DisplayPort in connector 2 for 8K4K (max.) resolution. 8K4K (max) 4 Audio line-out port Connect speakers to playback audio coming through DP audio channels. Only supports 2-channel audio. NOTE: The audio line-out port does not support headphones. WARNING: Excessive sound pressure from earphones or headphones can cause hearing damage or loss. 5 USB upstream port Connect the USB cable that comes with your monitor to the computer. Once this cable is connected, you can use the USB downstream connectors on the monitor. 6a,6b USB downstream ports (4) Connect your USB devices. * You can only use these connectors after you have connected the USB cable to the computer and USB upstream connector on the monitor. (Port with battery icon is for BC 1.2). 7 Stand lock Lock the stand to the monitor using a M3 x 6 mm screw (screw not included). * It is recommended to use either the port (6b) for your wireless USB device whenever possible. About Your Monitor | 9 Monitor Specifications Flat Panel Specifications Screen type Color Active Matrix Liquid Crystal Display with a (WLED) - TFT LCD Panel type In Plane Switching (IPS) Viewable image Diagonal 80.01 cm (31.5 inches) Active Area Horizontal 698.1 mm (27.48 inches) Vertical 392.7 mm (15.46 inches) Area 274143.9 mm2 (424.84 inches2) Pixel pitch 0.0303 mm x 0.0909 mm Viewing angle Horizontal 178° (typical) Vertical 178° (typical) Luminance output 400 cd/m² (Center 1 Point, typical) Contrast ratio 1300 to 1 (typical) Faceplate coating Anti-Reflective treatment of the front polarizer (2H) Backlight LED Response Time 8 ms (normal), 6 ms (fast) Color depth 10-bit 1.07 Billion colors Color gamut Adobe RGB 100%, sRGB 100%, REC709 100%, DCI 98% Resolution Specifications Horizontal scan range 30 kHz to 90 kHz Vertical scan range 59 Hz to 61 Hz Maximum preset resolution 7680 x 4320 at 60 Hz Video display capabilities 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p, (DP playback) 4320p 10 | About Your Monitor Preset Display Modes Display Mode Horizontal Vertical Pixel Clock Sync Polarity Frequency Frequency (MHz) (Horizontal/ (kHz) (Hz) Vertical) 720 x 400 31.5 70.0 28.3 -/+ 640 x 480 31.5 60.0 25.2 -/- 640 x 480 37.5 75.0 31.5 -/- 800 x 600 37.9 60.0 40.0 +/+ 800 x 600 46.9 75.0 49.5 +/+ 1024 x 768 48.4 60.0 65.0 -/- 1024 x 768 60.0 75.0 78.8 +/+ 1152 x 864 67.5 75.0 108.0 +/+ 1280 x 800 49.3 60.0 71.0 +/+ 1280 x 1024 64.0 60.0 108.0 +/+ 1280 x 1024 80.0 75.0 135.0 +/+ 1600 x 1200 75.0 60.0 162.0 +/+ 1920 x 1080 67.5 60.0 193.5 +/+ 2048 x 1080 26.3 24.0 26.3 +/- 2048 x 1080 66.7 60.0 66.6 +/- 2560 x 1440 88.8 60.0 241.5 +/- 3840 x 2160 133.3 60.0 533.3 +/- 7680 x 4320 266.6 60.0 2089.8 +/- * To display 7680 x 4320 at 60 Hz, both DP1 and DP2 must be connected to the same graphics card. DP source’s graphics card must be DP1.4 certified and Tile display feature, capable of supporting resolution up to 7680 x 4320 at 60Hz and its driver supports DisplayID v1.3. About Your Monitor | 11 Electrical Specifications Video input signals • Digital video signal for each differential line Per differential line at 100 ohm impedance • DP signal input support Input voltage/ frequency/current 100-240 VAC / 50 or 60 Hz ± 3 Hz / 2.1 A (maximum) Inrush current 120 V: 40 A (Max.) 240 V: 80 A (Max.) Power Consumption 0.2 W (Off Mode)1 0.3 W (Standby Mode)1 88.5 W (On Mode)1 125 W (Max)2 3 63.37 W (Pon) 195.49 kWh (TEC)3 1 As defined in EU 2019/2021 and EU 2019/2013. 2 Max brightness and contrast setting with maximum power loading on all USB ports. 3 Pon: Power consumption of On Mode as defined in Energy Star 8.0 version. TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. NOTE: This monitor is ENERGY STAR certified. This product qualifies for ENERGY STAR in the factory default settings which can be restored by “Factory Reset” function in the OSD menu. Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR specified limit. 12 | About Your Monitor Physical Characteristics Connector type • DP connector x 2 • Audio line-out • USB 3.0 upstream port connector • USB 3.0 downstream port connector x
Load more

Recommended publications
  • MX2M Series Devices
    User’s Manual MX2M-FR24R Hybrid Modular Multimedia Matrix v1.2 21-04-2021 Hybrid Modular Matrix Switcher series – User's Manual 2 Important Safety Instructions Waste Electrical & Electronic Equipment Common Safety Symbols WEEE Class I apparatus construction. Symbol Description This equipment must be used with a mains power system with a This marking shown on the product or its literature, protective earth connection. The third (earth) pin is a safety feature, indicates that it should not be disposed with other do not bypass or disable it. The equipment should be operated only household wastes at the end of its working life. To Alternating current from the power source indicated on the product. prevent possible harm to the environment or human health from uncontrolled waste disposal, please To disconnect the equipment safely from power, remove the power separate this from other types of wastes and recycle it Protective conductor terminal cord from the rear of the equipment, or from the power source. The responsibly to promote the sustainable reuse of material MAINS plug is used as the disconnect device, the disconnect device resources. Household users should contact either the shall remain readily operable. retailer where they purchased this product, or their local government On (Power) There are no user-serviceable parts inside of the unit. Removal of the office, for details of where and how they can take this item for cover will expose dangerous voltages. To avoid personal injury, do not environmentally safe recycling. Business users should contact their Off (Power) remove the cover. Do not operate the unit without the cover installed.
    [Show full text]
  • Intel Embedded Graphics Drivers, EFI Video Driver, and Video BIOS V10.4
    Intel® Embedded Graphics Drivers, EFI Video Driver, and Video BIOS v10.4 User’s Guide April 2011 Document Number: 274041-032US INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
    [Show full text]
  • KTA55/Pitx Software Guide User Information Table of Contents
    KTA55/pITX KTD-S0043-A User Information Table of Contents » Table of Contents « 1 User Information .............................................................................1 1.1 About This Document.................................................................................................... 1 1.2 Copyright Notice.......................................................................................................... 1 1.3 Trademarks................................................................................................................. 1 1.4 Standards................................................................................................................... 1 1.5 Warranty .................................................................................................................... 1 1.6 Life Support Policy ....................................................................................................... 2 1.7 Technical Support ........................................................................................................ 2 2 BIOS Update ...................................................................................3 2.1 AFUDOS (AMI) ............................................................................................................. 3 2.2 KTA55UPD (Kontron) .................................................................................................... 3 2.3 BFLASH (Kontron).......................................................................................................
    [Show full text]
  • Understanding EDID - Extended Display Identification Dataanalog and Digital
    DIGITAL CONNECTION DVI-I Dual Link DVI-D Dual Link DVI-I Single Link DVI-D Single Link analog and digital digital only digital only Understanding EDID - Extended Display Identification Dataanalog and digital DID data exchange is a standardized means for a display to communicate its capabilities to a source device. The Epremise of this communications is for the display to relay its operational characteristics, such as its native resolution, to the attached source, and then allow the source to generate the necessary video characteristics to match the needs of the display. This maximizes the functional compatibility between devices without requiring a user to configure them manually, thus reducing the potential for incorrect settings and adjustments that could compromise the quality of the displayed images and overall reliability of the system. VGA - VESA Where is EDID Utilized? E-DDC host assignment Generally, the source device will be a Prior to the development of EDID, computer graphics card on a desktop pins 4, 11, 12, and 15 on the VGA or laptop PC, but provisions are in connector were sometimes used to place for many other devices, including define monitor capabilities. These ID bit PIN # SIgNAL NAME PIN # SIgNAL NAME pins carried either high or low values to 1 Red HDMI9 DDC 5V supply HDTV receivers and DVRs, DVD and type A Blu-ray Disc players, and even gaming define different screen resolutions. VESA 2 Green 10 Sync return consoles, to read EDID and output video extended this scheme by redefining VGA 3 Blue 11 Monitor ID bit 0 Bi-directional 4 Monitor ID bit 12 accordingly.
    [Show full text]
  • Information Technology Services Interactive Technologies Design
    Information Technology Services Interactive Technologies Design Guidelines for Audio visual, video conferencing, multimedia, collaboration and other interactive technology provisioning at Massey University Updated: DRAFT 26 June 2017 Published on: ITS Interactive Technologies Guidelines for Massey Suppliers and Staff Table of Contents Document History ................................................................................................................................... 3 Document Objectives .............................................................................................................................. 3 Document Review ................................................................................................................................... 3 Related Documents ................................................................................................................................. 3 Audio Visual Guidelines .......................................................................................................................... 4 Rich Media Access Points .................................................................................................................... 4 Video Linked Teaching ........................................................................................................................ 4 Video Conferencing ............................................................................................................................. 4 Document Camera/Visual Presenter .................................................................................................
    [Show full text]
  • UHD Color for Games
    UHD Color for Games Author: Evan Hart Date: June 14, 2016 Version: 1.0 Introduction With the advent of Ultra High Definition television and the UHD Alliance1 specification for televisions, displays are taking a substantial step forward compared to the standards developers have been used to for the past two decades. While this is a specification for televisions, the technologies involved will ultimately impact many classes of displays. This shift in display standards presents substantial challenges for anyone concerned about the quality of images they display. The audience for this paper is any graphics programmer interested in being ready for this transition, but in particular it focuses on challenges tied to game development. Microsoft and Hewlett-Packard created the sRGB standard in 1996. This standard allowed reasonably faithful representation of images on most computers. In many ways, it was standardizing what was already in use, as the standard conforms to what was implemented in many CRT displays at the time. The standard not only specifies the ‘gamma’ function most graphics programmers think of, but it also specifies the chromaticities of the red, green, and blue color primaries as well as the white point and the maximum luminance. Similarly, the rec.709 specification describes these properties for HDTVs. It differs somewhat in that it has a dimmer expected viewing environment. (Viewing environments impact the perception of properties of images, such as contrast, resulting in modified gamma correction curve, etc) The new UHD Alliance specification brings about new versions of components that defined the sRGB space graphics programmers have been living in for two decades.
    [Show full text]
  • VESA Displayhdr CTS, Version
    VESA High-performance Monitor and Display Compliance Test Specification (DisplayHDR CTS) Version 1.0 27 November, 2017 www.vesa.org Purpose The purpose of this Specification is to provide performance guidance to manufacturers of HDR PCs, including laptops, All-in-Ones, and desktop monitors, to facilitate a DisplayHDR user-facing logo program that defines a publicly shared set of standards that are represented by a series of logos. Summary This Specification describes HDR, why VESA created a DisplayHDR logo program, and the compliance test requirements that are necessary for a device manufacturer to self-certify a device as meeting one or more of the VESA DisplayHDR logo performance tiers. UNAUTHORIZED DISTRIBUTION PROHIBITED VESA DisplayHDR CTS Version 1.0 Copyright © 2017 Video Electronics Standards Association. All rights reserved. Page 1 of 50 Contents Contents Purpose . 1 Summary . 1 Preface . 6 Intellectual Property . .6 Trademarks . .6 Support for this Specification . .6 Acknowledgments. .7 Revision History . .7 Section 1 Overview . 8 1.1 Summary . .8 1.2 Introduction . .8 1.3 Scope . .9 1.4 Terms, Abbreviations, Acronyms, and Initialisms. .10 1.5 Conventions . .11 1.5.1 Precedence. .11 1.6 Reference Documents . .11 Section 2 Specification Summary . 13 Section 3 Test Environment . 14 3.1 Ambient Temperature . .14 3.2 Colorimeter/Sensor Usage . .14 3.3 System Warm-up Time . .14 3.4 Colorimeter Requirements . .15 3.5 Hardware and Software for Semi-automated Testing . .15 3.6 Test Suite and Test Files . .16 Section 4 Video Signal Input Processing . 17 4.1 HDR10 . .17 4.2 HLG . .17 4.3 White Point.
    [Show full text]
  • VESA Displayhdr CTS, Revision
    VESA High-performance Monitor and Display Compliance Test Specification (DisplayHDR CTS) Revision 1.1 29 August, 2019 www.vesa.org Purpose The purpose of this Specification is to provide performance guidance to manufacturers of HDR PCs, including laptops, All-in-One PCs, and desktop monitors, to facilitate a DisplayHDR user-facing logo program that defines a publicly shared set of standards that are represented by a series of logos. Summary This Specification describes HDR, why VESA created a DisplayHDR logo program, and the compliance test specifications that are necessary for a device manufacturer to self-certify a device as meeting one or more of the VESA DisplayHDR performance tiers. UNAUTHORIZED DISTRIBUTION PROHIBITED VESA DisplayHDR CTS Revision 1.1 Copyright © 2017 – 2019 Video Electronics Standards Association. All rights reserved. Page 1 of 80 Contents Contents Purpose . 1 Summary . 1 Preface . 8 Intellectual Property . .8 Trademarks . .8 Support for this Specification . .8 Acknowledgments. .9 Revision History . .10 Section 1 Overview . 11 1.1 Summary . .11 1.2 Introduction . .11 1.3 Scope . .12 1.4 Abbreviations and Acronyms. .13 1.5 Glossary . .14 1.6 Conventions . .15 1.6.1 Precedence. .15 1.6.2 Keywords . .15 1.7 Reference Documents . .16 Section 2 DisplayHDR Specification Summary. 18 Section 3 Test Environment . 20 3.1 Ambient Temperature . .20 3.2 Measurement Instrument/Sensor Usage. .20 3.3 System Warm-up Time . .21 3.4 Measurement Instrument Specifications . .21 3.5 Hardware and Software for Semi-automated Testing . .23 3.6 Test Suite and Test Files . .24 3.7 DisplayHDR True Black Performance Level Testing Methodology.
    [Show full text]
  • PICMG COM Express Carrier Design Guide
    COM Express® Carrier Design Guide Guidelines for designing COM Express® Carrier Boards December 6, 2013 Rev. 2.0 This design guide is not a specification. It contains additional detail information but does not replace the PICMG COM Express® (COM.0) specification. For complete guidelines on the design of COM Express® compliant Carrier Boards and systems, refer also to the full specification – do not use this design guide as the only reference for any design decisions. This design guide is to be used in conjunction with COM.0 R2.1. PICMG® COM Express® Carrier Board Design Guide Rev. 2.0 / December 6, 2013 1/218 © Copyright 2013, PCI Industrial Computer Manufacturers Group. The attention of adopters is directed to the possibility that compliance with or adoption of PICMG® specifications may require use of an invention covered by patent rights. PICMG® shall not be responsible for identifying patents for which a license may be required by any PICMG® specification or for conducting legal inquiries into the legal validity or scope of those patents that are brought to its attention. PICMG® specifications are prospective and advisory only. Prospective users are responsible for protecting themselves against liability for infringement of patents. NOTICE: The information contained in this document is subject to change without notice. The material in this document details a PICMG® specification in accordance with the license and notices set forth on this page. This document does not represent a commitment to implement any portion of this specification in any company's products. WHILE THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE, PICMG® MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF TITLE OR OWNERSHIP, IMPLIED WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR USE.
    [Show full text]
  • The New NASA Glenn Visitor Center a 3D Planetarium for the Alps
    www.bowentechnovation.com (317) 863-0525 fax (317) 863-0531 The New NASA Glenn Visitor Center By: Brian Norris BioMedicine and STEM ( Sci- Bowen Technovation ence, Technology, Engineering, recently completed and Math) achievements. This the installation of animated content is interactive all-new exhibit and and responds to users’ steps. In presentation theater addition to the floor projection, a technology systems for the new set of three monitors respond to NASA Glenn Visitor Center located the action on the floor. at the Great Lakes Science Center Living in Space Gallery-Phase 1: in Cleveland, Ohio. The project was Explore Gallery – Phase 1: After astronauts get to space; how completed in two phases over the Guests explore the past, present do they eat, sleep, and go to the span of ten months from the start of and future of human space explora- bathroom? Learn day-to-day living installation to owner hand off. The tion in this gallery. The centerpiece on the International Space Station new galleries are separated into two is the Skylab 3 Apollo Command and find out how we’re preparing distinctive exhibit areas. Below is an Module from 1973. This gallery has for longer space journeys to Mars outline of these areas, followed by a diverse collection of technology. and beyond. You can watch videos a Q&A with others involved in the Touch screen interactives let you ex- with Ohio Astronaut Sunita Wil- project. plore NASA Glenn Research history liams and also use a touch screen in- and NASA’s unmanned research teractive to explore the International Entry Interactive – Phase 1: The missions.
    [Show full text]
  • Using 802.11 in Industrial Applications
    October 2013 european business press www.electronics-eetimes.com Using 802.11 in Industrial Applications EETimes_Cover_October_2013.indd 1 9/25/13 10:37 AM 130919_VELO_EET_EU.indd 1 9/17/13 3:37 PM OCTOBER 2013 opinion DESIGN & PRODUCTS 4 Can Edison2 convince Detroit to ‘lighten up’? SPECIAL FOCUSES: - DISPLAYS & INTERFACES 50 Last Word: Product lifecycle management from design through maintenance 18 Near noiseless ADC drivers for imaging news & TECHNOLOGY 23 Driving TFT displays to the perfection On one hand, high definition TFT displays have 6 Daimler transplants Tesla drive into B-Class Benz become a master component of industrial applica- tions, on the other hand, there is still a lack of inter- 6 Flexible curved displays to top $27 Billion by 2023 face standardization for the control of these displays. 8 Apple’s A7 chip fabricated at 26 Developing an industrial-grade Samsung’s foundry, M7 controller EMC-certified HMI in 4 weeks from NXP, says Chipworks The Medical and paramedical sector is constantly evolving. 8 Startup cuts through lack of IoT standards Customers from this area innovate The IEEE Standards organization is in order to offer equipment that combines both techno- finally having a meeting in the US to logical performances and quality graphic displays. work on standards for the internet of things (IoT). - WIRELESS COMMUNICATIONS 10 Using 802.11 in industrial applications 31 Updating car ECUs over-the-air The IEEE 802.11 standard has evolved dramatically, Getting the growing amount of software in vehicles and is now a collection of standards with downward under control, reducing the compatibility.
    [Show full text]
  • Dell Ultrasharp 32 Monitor User's Guide
    Dell UltraSharp 32 Monitor User’s Guide Model No. : UP3214Q Regulatory model: UP3214Qt Regulatory type: UP3214Q001 NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2013-2014 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft. Corporation in the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. 2014 – 06 Rev. A02 Contents 1 About Your Monitor .......................5 Package Contents . .5 Product Features . 6 Identifying Parts and Controls . .7 Monitor Specifications . 10 Plug and Play Capability . 18 LCD Monitor Quality and Pixel Policy.
    [Show full text]