DOCSLIB.ORG

Agilent Digital Multimeters

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Agilent Digital Multimeters Agilent Digital Multimeters Designed to handle your toughest assignments in various applications Index Measurement Digits of speed (reading/s Basic 1-yr DCV Connectivity & Model Description resolution at 42 digits) accuracy Basic measurements software Page: Benchtop DMM, 42 (U3401A) N/A 0.0120% DCV, ACV, DCI, ACI, N/A 4 dual display 52 (U3402A) 2-wire resistance (4-wire Elegantly simple on U3402A), frequency, and affordable continuity, and diode DMMs with basic and good capabilities U3401A/U3402A 5.5-digit DMM 52 26 0.0250% DCV, ACV, DCI, ACI, USB 2.0, GPIB 5 with built-in 30 W 2- and 4-wire resistance, power supply frequency, continuity, Halves bench/ diode, and capacitance rackspace need 30-W with four output for two instruments ranges, OVP/OCP, auto scan/ramp and square U3606A/U3606B wave generator 5.5 digit bench 52 190 0.0150% DCV, ACV, DCI, ACI, USB 2.0, 6 digital multimeter 2- and 4-wire resistance, Serial Interface OLED dual display frequency, continuity, (RS-232), GPIB diode, capacitance, and DMM Connectivity temperature Utility software (page 24) 34450A Bench/System 62 300/1000 0.0075/0.0035% DCV, ACV, DCI, ACI, USB, LAN/LXI 7 DMM 2- and 4-wire resistance, Core, GPIB, 34401A frequency, period, DMM Connectivity Replacement for continuity, diode, Utility (page 24) accuracy, speed, temperature measurement ease 34460A/34461A and versatility Bench/System 62 1000 0.0035% DCV, ACV, DCI, ACI, GPIB, RS-232, 8 DMM 2- and 4-wire resistance, DMM Connectivity Industry standard frequency, period, Utility software for accuracy, speed, continuity, and diode. (page 24) measurement ease and versatility 34401A Bench/System 62 10,000 0.0030% DCV, ACV, DCI, USB, LAN/LXI 9 DMM, dual display (34410A) ACI, 2- and 4-wire Core, GPIB, DMM Highest through- 50,000 resistance, frequency, Connectivity Utility put of benchtop (34411A) period, continuity test, software (page 24) DMMs, best choice capacitance, temperature 34410A/34411A for system use Nanovolt/µΩ meter 72 250 0.0030% DCV, DCI, 2- and 4-wire GPIB, RS-232, 10 Very accurate, resistance, 2 channel Intuilink software low-level scanning, temperature measurements 34420A Bench/System 82 100000 0.0008% DCV, ACV, DCI, ACI, GPIB 11 DMM (@ 42 digits) (0.0004% 2- and 4-wire resistance, The fastest, optional) frequency, period, and most lexible and temperature 3458A most accurate multimeter by Agilent Ideal multimeter for demanding applications 2 Index Measurement Digits of speed (reading/s Basic 1-yr DCV Connectivity & Model Description resolution at 42 digits) accuracy Basic measurements software Page: Handheld DMM 32 3 0.5% DCV, ACV, DCI, ACI, N/A 13 Illuminate test area 2- and 4-wire resistance, and measure frequency, period, in safer manner continuity, diode, U1190 Series capacitance, temperature Handheld clamp 32 7 0.5% DCV, ACV, DCI, ACI, 2-wire IR-USB, 14 meter resistance, frequency, Bluetooth® For convenient high continuity, diode test, capacitance, temperature U1210 Series current measurements Handheld DMM 32 5 0.5% DCV, ACV, DCI, ACI, IR-USB, 15 Retool your resistance, frequency, Bluetooth expectations with the continuity, diode test, U1230 Series Agilent U1230 Series capacitance, temperature handheld DMM Handheld DMM 4 7 0.09% DCV, DCI, ACV, ACI, 2-wire IR-USB, 16 Feature-rich and resistance, frequency, Bluetooth robust DMMs continuity, diode test, switch U1240 Series counter, harmonic ratio, capacitance, temperature, 4-20 mA % scale Handheld DMM 42 7 0.025% DCV, DCI, ACV, ACI, 2-wire IR-USB, 17 Versatile, high resistance, frequency, Bluetooth performance DMMs continuity, diode test, dB, U1250 Series capacitance, temperature, frequency counter, 4-20 mA % scale Handheld DMM 42 7 0.05% DCV, DCI, ACV, ACI, 2-wire IR-USB, 18 More functionality resistance, frequency, Bluetooth in a single tool continuity, diode test, dB, U1270 Series capacitance, temperature, 4-20 mA % scale Handheld multi- 42 3 0.003% DCV, ACV, DCI, ACI, 2-wire IR-USB 19 function resistance, temperature, calibrator/meter frequency, diode test, U1401B Calibrator and DMM continuity, pulse width, in one tool duty cycle USB Modular DMM 52 100 0.02% DCV, ACV, DCI, ACI, 2- and USB 2.0 20 Compact, with plug- 4-wire resistance, frequency U2741A and-play simplicity and period, continuity, diode test, temperature PXI DMM - basic 62 150 .009% DCV, DCI, ACV, ACI, 2- and PXI module; 21 features, Best for 4-wire resistance IVI-C, IVI-COM, functional test when LabVIEW, there are multiple MATLAB drivers. tests with range or Signametrics function changes. compatible driver M9181A is also available PXI DMM 62 4,500 for M9182A .004% All M9181A measurements, PXI-hybrid 21 High and enhanced 15,000 for M9183A plus frequency/period, module; IVI-C, performance models. capacitance, and IVI-COM, Best for functional temperature. M9183A LabVIEW, test when there are includes duty cycle, MATLAB drivers. multiple tests with counter/totalizer, and DC Works in popular M9182A/M9183A range or function source. test development changes. environments such as Visual Studio® (VB. NET,C#, C/C++). Signametrics compatible driver is also available Infrared (IR)-to- N/A N/A N/A N/A Agilent Mobile 12 Bluetooth® Adapter Meter Enables Bluetooth® connection to Agilent Agilent Mobile U1210, U1230, U1240, Logger U1250 and U1270 series handheld U1177A multimeter for remote monitoring & data logging. Accessories compatibility chart 22-24 3 Basic + good = elegant simplicity U3400 Series 4½ and 5½ digit multimeters Key features ▪ Up to 120,000 counts resolution ▪ Selectable resolutions for variable measurement speeds ▪ Up to six built-in math functions – dBm, Relative, ▪ Kensington lock slot security Min/Max, Compare, Hold ▪ Dual display on bright VFD Primary display Secondary display Input terminals Measurement Autoranging, Math Shift Power and current fuse function manual range operation on/off keypads and comparator keypads switch operation Key speciications Ordering information U3401A 42 digit dual display digital multimeter DCV accuracy 0.02% U3402A 52 digit dual display digital multimeter Reading speed N/A Measurement functions DCV, ACV, DCI, ACI, 2-wire Each U3400 Series includes: and 4-wire resistance, • Quick start guide frequency, diode, continuity • Product reference CD Type of connectivity N/A • Certiicate of calibration (CoC) 34138A test lead kit Technical datasheet: • Literature number 5990-3970EN • AC power cord Options: U3400A-100 USB to RS232 cable U3400A-1CM Rack mount kit U3400A-1CN Dual lange kit www.agilent.com/find/low-cost-dmm 4 Two instruments in one U3606A/U3606B multimeter|DC power supply Key features Full-featured DMM Full-featured DC power supply ▪ 8 built-in math functions ▪ 30 W, 30 V/1 A, 100 mA/30 V, 8 V/3 A and ▪ 120,000 counts resolution 1000 mV/3 A ranges ▪ 4-wire mΩ measurement with 0.001 mΩ ▪ OVP and OCP load protection resolution ▪ Auto ramp and scan for multi-level DC bias testing ▪ Up to 4.8 kHz square-wave output VFD display Local/shift key Source terminals Multimeter terminals Power On/Off button Multimeter Source operation keys operation Autorange and manual range keys keys Key speciications Ordering information U3606A 52 digit digital multimeter|DC power supply DCV accuracy 0.025% U3606B 52 digit digital multimeter|DC power supply Reading speed 26 readings/second Measurement functions DCV, ACV, DCI, ACI, 2-wire Each unit includes: and 4-wire resistance, • Quick start guide frequency, diode, continuity, • Product reference CD and capacitance ▪ Agilent IO Library Suite Type of connectivity GPIB, USB 2.0 ▪ Certiicate of calibration ▪ U8201A combo test lead kit Technical datasheet: ▪ USB 2.0 high-speed type A to type B cable Literature number 5991-2849EN ▪ AC power cord www.agilent.com/find/dmm-power 5 Turbo charge your measurements with one of the fastest tools in its class 34450A bench digital multimeter Key features ▪ Fast reading speed up to 190 readings/sec ▪ Built-in histogram function ▪ Multiple connectivity options – USB 2.0, Serial ▪ With Fluke 45 and Fluke 8808A code compatibility Interface (RS-232) and GPIB ▪ Up to 50,000 memory points for data logging 5.5 digit OLED dual display allows clear and quick view of measurements Fast 190 readings/sec and 0.015% DCV accuracy to help you achieve throughput breakthrough Input terminals Kensington lock to better secure the unit Eleven measurement functions Up to 50,000 memory Built-in math functions points for data logging and Multiple choices of connectivity histogram function and trigger in/out capability for production data analysis Key speciications Ordering information 34450A 52 digit dual display digital multimeter DCV accuracy 0.015% Reading speed 190 readings/s Each 34450A includes: Measurement functions DCV, ACV, DCI, ACI, 2-wire • Test lead kit and 4-wire resistance, • Power cord frequency, diode, continuity, • USB interface cable capacitance, temperature • Quick start guide Type of connectivity USB 2.0, Serial • Product reference CD Interface (RS-232) • Agilent IO Library Suite CD-ROM and GPIB Technical datasheet: Upgradable options: Literature number 5991-1133EN 3445GPBU GPIB connectivity upgrade 3445MEMU 50,000 memory points upgrade for data logging www.agilent.com/find/34450A 6 The new standard for uncompromising performance in bench and system test 34460A/34461A 6½ digit Truevolt DMM Key features Display DMM results in ways you never have before ▪ 1000 V max voltage input, 3 A/10 A (34461A) max ▪ Color, graphical display with built-in bar chart, current input histogram, trend (34461A only), math, and statistics Move to the next generation 34401A DMM with 100% ▪ Save
Load more

Recommended publications
  • The 4 States QRP Group HF Test Set Construction Manual
    Copyright 2006, NB6M - Unauthorized Copying or Publication Prohibited The 4 States QRP Group HF Test Set Construction Manual Containing several key pieces of simple Test Equipment that are used to either test or troubleshoot radio circuitry By Wayne McFee, NB6M Revision 0.2 October 21, 2007 Copyright 2006, NB6M - Unauthorized Copying or Publication Prohibited 1 THE HF TEST SET .....................................................................................................................................3 INTRODUCTION............................................................................................................................................3 HF TEST SET SCHEMATIC ...........................................................................................................................5 BOARD LAYOUT..........................................................................................................................................6 PARTS LIST .................................................................................................................................................7 TOOLS AND EQUIPMENT NEEDED................................................................................................................9 PC BOARD, PARTS SIDE ...........................................................................................................................10 PC BOARD, TRACE SIDE...........................................................................................................................11 STARTING
    [Show full text]
  • Keysight 53147A/148A/149A Microwave Frequency Counter/Power Meter/DVM
    Keysight 53147A/148A/149A Microwave Frequency Counter/Power Meter/DVM Assembly Level Service Guide Notices U.S. Government Rights Warranty The Software is “commercial computer THE MATERIAL CONTAINED IN THIS Copyright Notice software,” as defined by Federal Acqui- DOCUMENT IS PROVIDED “AS IS,” sition Regulation (“FAR”) 2.101. Pursu- AND IS SUBJECT TO BEING © Keysight Technologies 2001 - 2017 ant to FAR 12.212 and 27.405-3 and CHANGED, WITHOUT NOTICE, IN No part of this manual may be repro- Department of Defense FAR Supple- FUTURE EDITIONS. FURTHER, TO THE duced in any form or by any means ment (“DFARS”) 227.7202, the U.S. MAXIMUM EXTENT PERMITTED BY (including electronic storage and government acquires commercial com- APPLICABLE LAW, KEYSIGHT DIS- retrieval or translation into a foreign puter software under the same terms CLAIMS ALL WARRANTIES, EITHER language) without prior agreement and by which the software is customarily EXPRESS OR IMPLIED, WITH REGARD written consent from Keysight Technol- provided to the public. Accordingly, TO THIS MANUAL AND ANY INFORMA- ogies as governed by United States and Keysight provides the Software to U.S. TION CONTAINED HEREIN, INCLUD- international copyright laws. government customers under its stan- ING BUT NOT LIMITED TO THE dard commercial license, which is IMPLIED WARRANTIES OF MER- Manual Part Number embodied in its End User License CHANTABILITY AND FITNESS FOR A 53147-90010 Agreement (EULA), a copy of which can PARTICULAR PURPOSE. KEYSIGHT be found at http://www.keysight.com/ SHALL NOT BE LIABLE FOR ERRORS Edition find/sweula. The license set forth in the OR FOR INCIDENTAL OR CONSE- Edition 3, November 1, 2017 EULA represents the exclusive authority QUENTIAL DAMAGES IN CONNECTION by which the U.S.
    [Show full text]
  • Keysight U1251B and U1252B Handheld Digital Multimeter
    Keysight U1251B and U1252B Handheld Digital Multimeter User’s and Service Guide Notices U.S. Government Rights Warranty The Software is “commercial computer THE MATERIAL CONTAINED IN THIS Copyright Notice software,” as defined by Federal DOCUMENT IS PROVIDED “AS IS,” AND Acquisition Regulation (“FAR”) 2.101. IS SUBJECT TO BEING CHANGED, © Keysight Technologies 2009 – 2019 Pursuant to FAR 12.212 and 27.405-3 WITHOUT NOTICE, IN FUTURE No part of this manual may be and Department of Defense FAR EDITIONS. FURTHER, TO THE reproduced in any form or by any Supplement (“DFARS”) 227.7202, the MAXIMUM EXTENT PERMITTED BY means (including electronic storage U.S. government acquires commercial APPLICABLE LAW, KEYSIGHT and retrieval or translation into a computer software under the same DISCLAIMS ALL WARRANTIES, EITHER foreign language) without prior terms by which the software is EXPRESS OR IMPLIED, WITH REGARD agreement and written consent from customarily provided to the public. TO THIS MANUAL AND ANY Keysight Technologies as governed by Accordingly, Keysight provides the INFORMATION CONTAINED HEREIN, United States and international Software to U.S. government INCLUDING BUT NOT LIMITED TO THE copyright laws. customers under its standard IMPLIED WARRANTIES OF commercial license, which is embodied MERCHANTABILITY AND FITNESS FOR Manual Part Number in its End User License Agreement A PARTICULAR PURPOSE. KEYSIGHT U1251-90036 (EULA), a copy of which can be found at SHALL NOT BE LIABLE FOR ERRORS http://www.keysight.com/find/sweula. OR FOR INCIDENTAL OR Edition The license set forth in the EULA CONSEQUENTIAL DAMAGES IN Edition 24, July 26, 2019 represents the exclusive authority by CONNECTION WITH THE FURNISHING, which the U.S.
    [Show full text]
  • 53200A Series RF/Universal Frequency Counter/Timers
    Keysight Technologies 53200A Series RF/Universal Frequency Counter/Timers Data Sheet Imagine Your Counter Doing More! Introduction Frequency counters are depended on in R&D and in manufacturing for the fastest, most accurate frequency and time interval measurements. The 53200 Series of RF and universal frequency counter/timers expands on this expectation to provide you with the most information, connectivity and new measurement capabilities, while building on the speed and accuracy you’ve depended on with Keysight Technologies, Inc. time and frequency measurement expertise. Three available models offer resolution capabilities up to 12 digits/sec frequency resolution on a one second gate. Single- shot time interval measurements can be resolved down to 20 psec. All models offer new built-in analysis and graphing capabilities to maximize the insight and information you receive. More bandwidth Measurement by model Measurements Model Standard Opt MW Inputs – 350 MHz baseband frequency 350 MHz Input (53210A: Ch 2, – 6 or 15 GHz optional microwave Channel(s) 53220A/30A: Ch 3) channels Frequency 53210A, ● ● More resolution & speed 53220A, – 12 digits/sec 53230A – 20 ps single-shot time resolution Frequency ratio 53210A, ● ● – Up to 75,000 and 90,000 53220A, readings/sec (frequency and 53230A time interval) Period 53210A, ● ● More insight 53220A, 53230A – Datalog trend plot Minimum/maximum/ 53210A, ● – Cumulative histogram peak-to-peak input 53220A, – Built-in math analysis and voltage 53230A statistics – 1M reading memory and RF signal strength
    [Show full text]
  • Chapter 26 Oscillator Is Sufficient for Most of Our Needs and Most Amateur Equipment Relies on This Technique
    Test Procedures and Projects 26 his chapter, written by ARRL Technical Advisor Doug Millar, K6JEY, covers the test equipment and measurement techniques common to Amateur Radio. With the increasing complexity of T amateur equipment and the availability of sophisticated test equipment, measurement and test procedures have also become more complex. There was a time when a simple bakelite cased volt-ohm meter (VOM) could solve most problems. With the advent of modern circuits that use advanced digital techniques, precise readouts and higher frequencies, test requirements and equipment have changed. In addition to the test procedures in this chapter, other test procedures appear in Chapters 14 and 15. TEST AND MEASUREMENT BASICS The process of testing requires a knowledge of what must be measured and what accuracy is required. If battery voltage is measured and the meter reads 1.52 V, what does this number mean? Does the meter always read accurately or do its readings change over time? What influences a meter reading? What accuracy do we need for a meaningful test of the battery voltage? A Short History of Standards and Traceability Since early times, people who measured things have worked to establish a system of consistency between measurements and measurers. Such consistency ensures that a measurement taken by one person could be duplicated by others — that measurements are reproducible. This allows discussion where everyone can be assured that their measurements of the same quantity would have the same result. In most cases, and until recently, consistent measurements involved an artifact: a physical object. If a merchant or scientist wanted to know what his pound weighed, he sent it to a laboratory where it was compared to the official pound.
    [Show full text]
  • Oscilloscope Selection Guide Oscilloscope Selection Guide
    OSCILLOSCOPE SELECTION GUIDE OSCILLOSCOPE SELECTION GUIDE OSCILLOSCOPE SELECTOR GUIDE Tektronix offers oscilloscopes for many different applications and uses. To help you choose the right scope for your needs, the most common criteria for selecting a scope are listed below, along with helpful tips for determining your requirements. 1 Bandwidth All oscilloscopes have a low-pass frequency response that rolls CONTENTS off at higher frequencies. Oscilloscope bandwidth is specified as CHOOSING YOUR OSCILLOSCOPE 1-3 being the frequency at which a sinusoidal input signal is MIXED SIGNAL AND MIXED DOMAIN OSCILLOSCOPES 4-5 attenuated to 70.7% of the signal’s true amplitude – the -3 dB point. Your oscilloscope must have sufficient bandwidth to MSO/DPO2000B 4 capture all relevant frequency components of your signal. If you MDO3000 4 regularly work with digital signals, it may be easier to consider MDO4000C 5 bandwidth by comparing signal and oscilloscope rise time specifications. Use an oscilloscope with a rise time ADVANCED SIGNAL ANALYSIS OSCILLOSCOPES 6-7 specification five times faster than your signal rise time to MSO/DPO5000B 6 keep error below 2%. 5 Series MSO 6 Rule: Bandwidth > 5 x Highest Signal Frequency DPO7000C Series 7 MSO/DPO70000 Series 7 2 Sample Rate DPO70000SX Series 8 The faster an oscilloscope samples, the greater the resolution SAMPLING OSCILLOSCOPES 8 and detail of the displayed waveform, and the less likely that DSA8300 8 critical information or events will be lost. Tektronix recommends at least 5X oversampling to ensure signal details are captured BASIC OSCILLOSCOPES 9 and to avoid aliasing. TBS1000 9 Rule: Sample Rate > 5 x (Highest Frequency Component) TBS1000B/TBS1000B-EDU 9 TBS2000 9 BATTERY POWERED OSCILLOSCOPES 3 Record Length WITH ISOLATED CHANNELS 10 Record length is the number of samples the oscilloscope can THS3000 10 digitize and store in a single acquisition.
    [Show full text]
  • Build an Rf Frequency Counter Buffer for Hf
    BUILD IT YOURSELF By Dwayne Kincaid WD8OYG BUILD AN RF FREQUENCY COUNTER BUFFER FOR HF Most frequency counters can tolerate only low levels of RF at their input, but here’s a way to safely measure the frequency of an RF signal of up to 200 watts with your existing frequency counter. 36 January/February 2019 ■ FIGURE 1. Block diagram of frequency counter buffer. ■ FIGURE 2. Schematic of frequency counter buffer. his buffer allows you to connect your transceivers. It performs well, is easy to reproduce, counter to any RF source from 20 mW to is low cost, and has a minimal parts count. 200 watts, from 200 kHz to 60 MHz. The Most amateur HF transceivers are in the 5 to circuit has a protection limiter that keeps 200 watt range. This buffer (Figure 2) will allow Tthe RF signal strength in a safe range for the TTL you to connect your standard desktop frequency input of the counter, as well as providing gain for counter directly to the RF line, even with higher weaker signals (Figure 1). signal levels that most frequency counters can You can think of the buffer as a dam safely handle. For Citizens Band, most transceivers are in keeping high water out of Frequency Counter- the 4 to 12 watt range and will work fine with the ville. If the water/signal is too high upstream, buffer. you can limit how much of it gets through. Or, The low end of the buffer’s power range if its strength is too low, you can add some.
    [Show full text]
  • AN200-1 Fundamentals of Microwave Frequency Counters
    H Fundamentals of Microwave Frequency Counters Application Note 200-1 Electronic Counters Series 1 Table of Contents Down-Conversion Techniques for Automatic Microwave Frequency Counters ................................................. 3 Prescaling .................................................................................................... 3 Heterodyne Converter ............................................................................... 4 Transfer Oscillator ..................................................................................... 5 Harmonic Heterodyne Converter ............................................................ 6 Comparing the Principal Microwave Down-Conversion Techniques .................................................................................... 8 Measurement Speed .................................................................................. 8 Accuracy...................................................................................................... 8 Sensitivity and Dynamic Range ............................................................... 10 Signal-to-Noise Ratio ................................................................................. 11 FM Tolerance.............................................................................................. 12 AM Tolerance ............................................................................................. 14 Amplitude Discrimination ........................................................................ 14 Summary of the
    [Show full text]
  • Spectrum Analyzer
    Spectrum Analyzer GSP-9330 USER MANUAL ISO-9001 CERTIFIED MANUFACTURER This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company. The information in this manual was correct at the time of printing. However, Good Will continues to improve products and reserves the rights to change specification, equipment, and maintenance procedures at any time without notice. Good Will Instrument Co., Ltd. No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan. Table of Contents Table of Contents SAFETY INSTRUCTIONS .................................................. 3 GETTING STARTED .......................................................... 8 GSP-9330 Introduction .......................... 9 Accessories .......................................... 12 Appearance .......................................... 14 First Use Instructions .......................... 26 BASIC OPERATION ........................................................ 38 Frequency Settings ............................... 41 Span Settings ....................................... 45 Amplitude Settings .............................. 48 Autoset ................................................ 62 Bandwidth/Average Settings ................ 64 Sweep .................................................. 70 Trace .................................................... 77 Trigger ................................................
    [Show full text]
  • Frequency Measurements and Mixer
    Frequency Measurements and Mixer Introduction In this laboratory experience the student will measure the frequency of some signal using a frequency counter and a frequency translating device (mixer). Available instrumentation For this practical session you will use the following instrumentation: waveform generator (Hameg 8130, Hameg 8131 or similar) LED signal generator (output C and D, 5 MHz) analog oscilloscope frequency counter (Hameg HM 8122 or similar) For manuals and documentation: http://led.polito.it/main it/instrumentation.asp or see the “Addendum” at the end of these pages Mixer The internal scheme and the pins of the mixer are shown in figures 1 and 2. Figure 1: simplified scheme of the SBL-3 mixer Figure 2: pin scheme for the SBL-3 mixer (as seen from the top) Frequency measurements You can measure the frequency of the signals indicated in table I with the frequency counter. Following the manual instructions you must evaluate the uncertainty. For the trigger related uncertainty you can use a S/N value of 80dB. What’s happen to the trigger uncertainty if the S/N is reduced to a value of 40dB? Table I: frequency measurements Signal f /Hz f /Hz 1 kHz from waveform generator 15 kHz from waveform generator 5 MHz from waveform generator 5 MHz from LED sign.gen. output C 5 MHz from LED sign.gen. output D Frequency difference measurement Compute the frequency difference between output C and output D, starting from the measurements you reported on the table I. Now you can evaluate the uncertainty of the frequency difference.
    [Show full text]
  • Electronic Measurement & Measuring Instruments Syllabus
    ELECTRONIC MEASUREMENT & MEASURING INSTRUMENTS SYLLABUS Module-I (12 Hours) Basics of Measurements: Accuracy, Precision, resolution, reliability, repeatability, validity, Errors and their analysis, Standards of measurement. Bridge Measurement: DC bridges- wheatstone bridge, AC bridges – Kelvin, Hay, Maxwell, Schering and Wien bridges, Wagner ground Connection. Electronic Instruments for Measuring Basic Parameters: Amplified DC meter, AC Voltmeter, True- RMS responding Voltmeter, Electronic multi-meter, Digital voltmeter, Vector Voltmeter. Module-II (12 Hours) Oscilloscopes: Cathode Ray Tube, Vertical and Horizontal Deflection Systems, Delay lines, Probes and Transducers, Specification of an Oscilloscope. Oscilloscope measurement Techniques, Special Oscilloscopes – Storage Oscilloscope, Sampling Oscilloscope. Signal Generators: Sine wave generator, Frequency – Synthesized Signal Generator, Sweep frequency Generator. Pulse and square wave generators. Function Generators. Module-III (10 Hours) Signal Analysis: Wave Analyzer, Spectrum Analyzer. Frequency Counters: Simple Frequency Counter; Measurement errors; extending frequency range of counters Transducers: Types, Strain Gages, Displacement Transducers. Module-IV (6 Hours) Digital Data Acquisition System: Interfacing transducers to Electronics Control and Measuring System. Instrumentation Amplifier, Isolation Amplifier. An Introduction to Computer-Controlled Test Systems.IEEE-488 GPIB Bus Text Books: 1. Modern Electronics Instrumentation & Measurement Techniques, by Albert D.Helstrick and William D.Cooper, Pearson Education. Selected portion from Ch.1, 5-13. 2. Elements of Electronics Instrumentation and Measurement-3rd Edition by Joshph J.Carr.Pearson Education. Selected portion from Ch.1,2,4,7,8,9,13,14,18,23 and 25. Reference Books : 3. Electronics Instruments and Instrumentation Technology – Anand, PHI 4. Doebelin, E.O., Measurement systems, McGraw Hill, Fourth edition, Singapore, 1990. MODULE –I Chapter 1. Basics of Measurements 1.
    [Show full text]
  • Design of Multiple Waveform Generator & Frequency Counter
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 03 Issue: 07 | July-2016 www.irjet.net p-ISSN: 2395-0072 Design of Multiple Waveform Generator & Frequency Counter Based On DDS Mr. Pranjal A. Charde1, Prof. P.R. Lakhe2, Mr. Akshay P. Nanote3 1 M. Tech. Research Scholar, Electronics (Communication Engg.)S.D.C.E. Selukate, Wardha, Maharashtra, India 2Assistant Professor Department of Electronics and Communication Engineering S.D.C.E. Selukate. Wardha, Maharashtra, India 3Assistant Manager Gupta Energy Pvt. Ltd., Deoli, Wardha, Maharashtra, India ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - Direct Digital Synthesizer (DDS) is important role in modern digital communication. DDS is new frequency synthesis technique which starts from the concept of phase and directly synthesis waveform required. It has beneficial for fast frequency switching, fine frequency resolution, large bandwidth, and good spectral purity. DDS consists of a phase accumulator, a phase to sine amplitude converter, digital to analog converter. The DDS consisting multiple waveform Fig. DDS Architecture generators. DDS producing sine and cosine output Phase Accumulator: - It consists of Phase register and simultaneously by using only one lookup table. It has adder. Input 32 bit is provided to phase accumulator able to work in high speed frequencies and it is a method for each clock cycle, the content of phase register for digitally creating arbitrary waveforms from a single, increases by adding previous count and current count fixed frequency reference clock. It also consumes very then corresponding voltage level value is provided to less power than the conventional signal generator. DDS LUTs. circuit occupies less area and power dissipation.
    [Show full text]