Alpha Series

GOOD ENOUGH IS NOT ENOUGH

Woodworking Machines

HW110LC HW110S-36 HW110S-52 HW615 HW303 Woodworking Machines ALPHA SERIES

OVERVIEW OF ALPHA SERIES WOODWORKING MACHINES

The ALPHA Series is the brand new product line which represents the state-of-the-art innovations and technology of the Harvey team. For those who believe in "Good is not Enough", the Alpha Series is the best answer to their dreams. All of the ALPHA machines have been totally re-designed by Harvey with new ideas to redeﬁne the standards of woodworking machinery for the future. The new ideas are the result of intense listening, observing and study of woodworkers needs. The ALPHA Series has been designed for a much higher level of quality, functionality, and user enjoyment. The Harvey team hopes that these machines will facilitate and inspire woodworkers to higher levels of woodworking and greater enjoyment.

The Phase 1 launch includes three models of ALPHA machines:

HW110LC-36 10” 2HP Cabinet Table Saw HW110S-36 (52) 10” 4HP Industrial Dovetail Cabinet Table Saws HW615 15” 3HP Industrial Bandsaw

With over 15 years of experience in manufacturing high quality machines and serving woodworking customers world-wide in 105 countries, the Harvey Team is excited to have the opportunity to share this brand-new line of machines with American woodworkers!

01 ALPHA SERIES HW110LC-36

HW110LC-36 Cabinet Table Saw

The ALPHA Series HW110LC-36 is designed and engineered to set new standards for professional table saws. It features a 31-1/2" extra deep cast iron table for much safer wood cutting; permanent PVD coating on the entire table top with Titanium Nitride (TiN) for rust prevention and less friction; the innovative COMPASS miter gauge; the oversized T-square fence system with dual-position viewers for the hi-low fence positions; the newly developed blade guard with aerodynamic optimization of air flow; massive cast iron cabinet-mounted trunnion; and dust shroud with built-in dust collection connections for the upper and lower dust ports.

"Good Enough is Not Enough" is the ideal used to design every detail of the HW110LC-36. Woodworkers who are most passionate about quality tools will be well served by this table saw.

Features and Beneﬁts 31-1/2” Extra Deep Cast Iron Table Golden TiN Coated Table Top Unique COMPASS Miter Gauge Heavy Duty T-square Fence with High/Low Dual Viewers Special Transparent Blade Guard with optimized protection and dust control Massive Cast Iron Cabinet Mounted Trunnion Dust Shroud Under Blade Built-in Dust Collection Hose System Magnetic Safety Switch

02 ALPHA SERIES HW110LC-36

TiN Coated Table

The permanent PVD coating on the entire table top with Titanium Nitride (TiN) provides superb rust prevention and less friction.

The 31-1/2” extra deep cast iron table provides much safer wood cutting.

03 ALPHA SERIES HW110LC-36

Worm Gear Trunnion System

The cast iron trunnion is mounted to the cabinet insuring stability and accuracy. The worm gear system provides quick and accurate blade height and bevel adjustments.

04 ALPHA SERIES HW110LC-36

Innovative ”GLIDER” Blade Guard

The “GLIDER” blade guard with aerodynamic optimization improves the dust collection efﬁciency. The special transparent blade guard provides visibility for aligning the saw blade with the intended line of cut. Both side barriers automatically adjust to the thickness of the advancing workpiece.

Plug-in Quick-Release System

The patented "plug-in quick change" system allows you to change the blade guard and riving knife within a few seconds without the removal of the table insert.

05 ALPHA SERIES HW110LC-36

Powerful Motor with Safety Switch 2 HP TEFC Motor Powerful enough to provide long term performance even in the toughest conditions.

Magnetic Safety Switch The magnetic safety switch with thermal overload protection can prevent the motor from being damaged by overheating.

2 HP TEFC Motor Magnetic Safety Switch

06 ALPHA SERIES HW110LC-36

Heavy Duty T-square Fence System

Hi-Low Fence plate The high-low positions of the fence allow the user to best match the fence height to the workpiece for safer operation.

Forward and Backward Movement The fence plate can be moved forward and backward. The back position is beneﬁcial for many ripping and crosscutting operations.

Low Fence in Backward Position

07 ALPHA SERIES HW110LC-36

Dual Viewers on Hi-Low Fence

The ripping width can be easily read with the dual independent, magnifying, scale viewers.

08 ALPHA SERIES HW110LC-36

MG-36 “COMPASS” Miter Gauge

09 ALPHA SERIES HW110LC-36

Unlike any existing product, COMPASS MG-36 is a newly developed Miter Gauge with state-of-the-art Harvey design. The unique structure of MG-36 ensures positive angle setting accuracy as high as 1/20th degree without need of adjustment, this incredible accuracy can be transferred directly to your project. Every part of the body and fence are made of T-6 aircraft-grade aluminum alloy and hardened steel, then completely CNC precision machined to accuracies without any molding process. Each aluminum part is anodized with beautiful color and ﬁnish. The standard fence plate has 36” crosscut capacity which meets most of your cutting demands. The fence is equipped with an accurate flip stop and locking knob at any position.

Most importantly, COMPASS MG-36 is uniquely designed with a Quick-Action positive angle setting device which allows you to set -60°, -22.5°, 0°, +22.5°, +45°, +60 positive angles with single handed operation.

10 ALPHA SERIES HW110LC-36

Optimized Dust Collection System

Upper and lower dust collection is achieved simultaneously for clean and enjoyable cutting.

Overarm Dust 1 Collection Assembly

Blade Guard 2 with Dust Port

Built-in Dust 3 Collection System

4” (100 mm) Dust Port 4

11 ALPHA SERIES HW110LC-36 Optional Accessories

The following optional equipment can be easily mounted on the HW110LC, providing greater functional capacity.

Universal Overhead 3 Blade Guard System 4 Rear Table

1 Router Table

Sliding Table 2

5 Universal Mobile Base

1 Router Table Item: RT-100 Item NO.: 804105 Speciﬁcations Easily installed on all table saws with 31-1/2" (800 mm) Table Size 31-1/2" x 19-7/8" (800 mm x 505 mm) deep tables. Table T-slot Size 3⁄4" x 3⁄8" (19.05 x 9.525 mm) Universal mount for most routers. Fence Wing (x 2) 12-1⁄2" x 2-3⁄4" (317.5 x 70 mm) Precision ground cast iron table with standard "T" slots. Number of Table Inserts 2 The fence is made from anodized aircraft-grade Table Opening Size 4" (100 mm) Aluminum extrusion Table Insert 1" (25.4 mm), 2-3⁄8" (60 mm) Twin adjustable phenolic fence halves with depth Dust Port Size 2-1⁄2" (63.5 mm) adjustment can be used for lifetime. Weight 70 lbs (32kg) 12 ALPHA SERIES HW110LC-36

2 Sliding Crosscut Table Item: ST-1400S Item NO.: 801155 Speciﬁcations ST-1400S sliding table attachment can be easily installed on most of table Sliding Table Size 9" x 47" (228.5 x 1200 mm) saws to increase crosscutting capability. Extension Table Size 9" x 23-3⁄5" (228.5 x 600 mm) Industrial-grade sliding table with linear guide mechanism enables Maximum Table Travel 60-5/8" (1540 mm) extremely accurate cutting. Max. Rip Capacity 48-13/16" (1240 mm) T-6 6061 aircraft-grade aluminum extrusion fence can be rotated to left or Maximum Crosscutting Length 59" (1500 mm) right up to 60° with the built in miter gauge. Miter Gauge Range +60°/-60° 2 large adjustable flip stops with magnifying cursors are easily set for repeat cutting. Fence Full Length 43" (1090 mm) Weight 78 lbs (35.2 kg)

3 Universal Overhead Blade Guard System Item: S-12S Item NO.: 800728 Structured with a heavy duty steel frame, cast steel joints and aircraft grade aluminum alloy material for the best rigidity The unique 6 Degrees of Freedom (DOF) design allows this guard to adjust to any position. With S-12S Guard System, you can restrain the cutting dust perfectly and enjoy the clean air in your shop. The large, transparent PC body fully covers the blade at any tilt angle and can always be in place even when dadoing. The user-friendly S-12 Overhead Guard System can be used on 10” and 12” table saws, and it is suitable for most of the machine types on the market.

Speciﬁcations

Overall Dimensions 75-3/4" x 29-7/32" x 57-7/8" (1925 x 742 x 1470 mm) Weight 100 lbs (45 kg)

4 Rear Table 5 Universal Mobile Base Item: RT-10 Item NO.: 100101810 Item: MB-600 Item NO.: 703403 Customized to fit machine bases of any size with your own cut-to-size plywood. The RT-100 rear table can be mounted on the rear rail directly. Sturdy corner brackets attached with through-bolts provide tremendous strength. Two slots fit the miter gauge bar on both sides of the blade. Kick-stand casters provide easy mobility. Provides strong rear support for ripping long pieces. Adjustable feet provide stability during stationary machine use. Accepts 3⁄4" (19 mm) thick plywood. Includes two fixed caster brackets and two swivel caster brackets. Specifications Specifications Overall Dimensions 19-3/4" x 22-1/2" (500 x 570 mm) Minimum Base Plate Size 12" x 12" (305 x 305 mm) Weight 16 lbs (8 kg) Maximum Base Plate Size (with 3⁄4" Base) 36" x 36" (914 x 914 mm) Minimum Base Plate Thickness 1/2" (12.7 mm) Maximum Base Plate Thickness 1-1/2" (38 mm) Maximum Weight Capacity 600 lbs (270 kg) Weight 16 lbs (8 kg) 13 ALPHA SERIES HW110LC-36 Specifications

Item HW110LC Item NO. 709041 (TiN Coated Table) Product Dimensions Weight 411 lbs Length/Width/Height 70-3/4” x 49-3/4” x 48-1/4” Electrical Switch Magnetic with Thermal Overload Protection Motor Type TEFC, Capacitor Start, Induction Horsepower, Voltage, Phase, Amps 2.0 HP, 115 V, 1 PH, 16 A 2.0 HP, 230 V, 1 PH, 8 A Speed 3500 RPM Power Transfer V-Ribbed Belt Drive Blade Information Maximum Blade Diameter 10” Maximum Width of Dado 13/16” Blade Tilt Left 0-45° Arbor Diameter at Blade 5/8” Arbor Speed 3850 RPM Arbor Bearings Sealed and Permanently Lubricated Cutting Capacities Maximum Depth of Cut at 90° 3-1/8” Maximum Depth of Cut at 45° 2-3/16” Maximum Rip, Right of Blade 36” Maximum Rip, Left of Blade 9” Table Information Height 34” Cast Iron Table - Length/Width/Thickness 31-1/2” x 29-3/4” x 1-13/16” Miter Slot Miter Gauge Size - Width/Height 3/4” x 3/8” Other Information Dust Port Size 4”

Certiﬁcate UL Standard Satisﬁed

14 ALPHA SERIES HW110S

HW110S-36 (52) 4 HP Industrial Cabinet Table Saws

The ALPHA Series HW110S-36(52) Cabinet Table Saws are industrial grade premium table saws which have been designed and engineered to set new standards for the industry. They feature a powerful 4HP, single phase TEFC motor; 31-1/2" extra deep cast iron table for increased safety; permanent PVD coating of the entire table with Tintanium Nitride (TiN) for rust prevention and less friction; innovative COMPASS miter gauge with extremely accurate angle setting and ease of use; oversized T-square fence system with dual position viewers for the high/low fence; newly developed blade guard with aerodynamic optimization for dust removal; a unique Dovetail-style cast iron trunnion system for much smoother and more stable operation; a dust shroud for the blade with a built-in dual hose system for upper (blade guard) and lower (shroud) dust control.

"Good Enough is Not Enough" is the ideal used to design every detail of the HW110LS-36(52). Industrial woodworking shops will be well served by this workhorse.

Features and Beneﬁts

31-1/2” Extra Deep Cast Iron Table Powerful 4HP single phase TEFC motor Golden TiN Coated Table Top Unique COMPASS Miter Gauge Heavy Duty T-square Fence with High/Low Dual Viewers Special Transparent Blade Guard with optimized protection and dust control Unique Dovetail Structured Trunnion Dust Shroud Under Blade Built-in Dust Collection Hose System Magnetic Safety Switch

15 ALPHA SERIES HW110S

TiN Coated Table

The permanent PVD coating on the entire table top with with Titanium Nitride (TiN) enables superb rust prevention and less friction.

Extraordinary Work Table The 31-1/2” extra deep cast iron table provides much safer wood cutting.

16 ALPHA SERIES HW110S

Heavy Duty T-square Fence System for High Accuracy and Reliability

The HW110S is equipped with a Hi-Low fence plate which accommodates workpieces of various sizes providing a stable support system while ensuring safety when cutting small pieces of wood. The fence plate can also be moved forward and backward which effectively reduces the chance of kick back in crosscut operations.

The multiple position fence plate makes cutting bevels easier.

The Heavy Duty T-square Fence System can easily be adjusted to insure parallelism between the fence and the blade for smooth and precise cutting.

Low Fence in Back Position

17 ALPHA SERIES HW110S

Dual Viewers on Hi-Low Fence

The ripping width can be easily read with the dual independent, magnifying, scale viewers.

18 ALPHA SERIES HW110S

MG-36 “COMPASS” Miter Gauge

19 ALPHA SERIES HW110S

20 ALPHA SERIES HW110S

Zero-clearance Dovetail Trunnion System

Smooth Elevation

Accurate Cutting

Low Noise

21 ALPHA SERIES HW110S

The Saw Arbor is Designed to Meet Industrial Standards

The saw arbor is dynamically balanced and has preloaded ball bearings for excellent durability. It is highly accurate and can be easily disassembled, if needed, for maintenance.

Modular Design Extended Lifetime Easy Disassembling, Replacing a nd Maintenance Accuracy meets Industrial Standards

Pre-loaded Installation Insures Stability in Operation

22 ALPHA SERIES HW110S

Innovative ”GLIDER” Blade Guard

Plug-in Quick-Release System

The patented "plug-in quick change" system allows you to change the blade guard and riving knife within a few seconds without the removal of the table insert.

23 ALPHA SERIES HW110S

Powerful Motor with Safety Switch 4 HP TEFC Motor Powerful enough to provide long term performance even in the toughest conditions.

Magnetic Safety Switch The magnetic safety switch with thermal overload protection can prevent the motor from being damaged by overheating.

24 ALPHA SERIES HW110S

Optimized Dust Collection System

The overarm dust collection assembly is mounted on the HW110S as standard equipment. It's designed to work with the 4” (100 mm) dust port and blade guard allowing the upper and lower dust collection to work in unison to achieve hours of clean, enjoyable cutting time.

Overarm Dust 1 Collection Assembly

Blade Guard 2 with Dust Port

Built-in Dust 3 Collection System

4 4” (100 mm) Dust Port

25 ALPHA SERIES HW110S

Universal Overhead 3 Blade Guard System 4 Rear Table

1 Router Table

Sliding Table 2

5 Universal Mobile Base

Speciﬁcations

Overall Dimensions 75-3/4" x 29-7/32" x 57-7/8" (1925 x 742 x 1470 mm) Weight 100 lbs (45 kg)

Item HW110S-36 Item NO. 804104 (TiN Coated Table) Product Dimensions Weight 528 lbs Length/Width/Height 69” x 44” x 48” Electrical Switch Magnetic with Thermal Overload Protection Motor Type TEFC, Capacitor Start, Induction Horsepower, Voltage, Phase, Amps, Frequency 4 HP, 230 V, 1 PH, 16 A, 60Hz Speed 3450 RPM Power Transfer Triple V-Belts Drive Blade Information Maximum Blade Diameter 10” Maximum Width of Dado 13/16” Blade Tilt Left 0-45° Arbor Diameter at Blade 5/8” Arbor Speed 4800 RPM Arbor Bearings Sealed and Permanently Lubricated Cutting Capacities Maximum Depth of Cut at 90° 3-1/8” Maximum Depth of Cut at 45° 2-3/16” Maximum Rip, Right of Blade 36” Maximum Rip, Left of Blade 9” Table Information Height 34” Cast Iron Table - Length/Width/Thickness 31-1/2” x 44” x 1-13/16” Miter Slot Miter Gauge Size - Width/Height 3/4” x 3/8” Other Information Dust Port Size 4”

Certiﬁcate UL Standard Certif ied

28 ALPHA SERIES HW110S Speciﬁcations

Item HW110S-52 Item NO. 804103 (TiN Coated Table) Product Dimensions Weight 570 lbs Length/Width/Height 85” x 44” x 48” Electrical Switch Magnetic with Thermal Overload Protection Motor Type TEFC, Capacitor Start, Induction Horsepower, Voltage, Phase, Amps, Frequency 4 HP, 230 V, 1 PH, 16 A, 60Hz Speed 3450 RPM Power Transfer Triple V-Belts Drive Blade Information Maximum Blade Diameter 10” Maximum Width of Dado 13/16” Blade Tilt Left 0-45° Arbor Diameter at Blade 5/8” Arbor Speed 4800 RPM Arbor Bearings Sealed and Permanently Lubricated Cutting Capacities Maximum Depth of Cut at 90° 3-1/8” Maximum Depth of Cut at 45° 2-3/16” Maximum Rip, Right of Blade 52” Maximum Rip, Left of Blade 9” Table Information Height 34” Cast Iron Table - Length/Width/Thickness 31-1/2” x 44” x 1-13/16” Miter Slot Miter Gauge Size - Width/Height 3/4” x 3/8” Other Information Dust Port Size 4”

Certiﬁcate UL Standard Certif ied

29 ALPHA SERIES HW615

HW615 15” Industrial Bandsaw Like many traditional machines, band saws have not changed much over the decades. Harvey decided to redesign band saws with new ideas to raise the standards for band saws. The ALPHA Series HW615 Bandsaw is a direct result of these ideas. The basic concept behind the HW615 is to make a truly heavy-duty, powerful and precise bandsaw which will enable you to do the job with ease and pleasure.

The HW615 is built with a 3 HP, 220v motor to ensure enough power to undertake any job that a 15” bandsaw can handle; solid, reinforced structural steel frame; premium, heavy-duty cast iron flywheels; unique tool-less upper and lower blade guides; substantial 20”x 20” work table with TiN Coating for rust prevention; extra-large precision high low aluminum fence with solid T-square gliding/locking structure; worm gear system for smooth worktable tilt; dual trunnions for stability; fully enclosed blade guard; and a PS Wood TPC Series blade as standard equipment. All of these add to the precision, smoothness and solid performance and make HW615 a ultimate bandsaw for professional woodworkers.

Features and Beneﬁts Dynamically balanced cast iron flywheels for smooth operation and extra torque when running 3HP powerful TEFC single phase motor (220V) Golden TiN coated worktable for rust prevention and low friction Unique tool-less upper and lower blade guides Extra sized and robust steel frame Quick release tensioning levers Worm gear worktable tilting Foot brake with micro switch Full enclosure protection for blade Micro-switches on the top and bottom doors for extra safety Dual trunnion system for stable support of worktable Extra large aluminum alloy precision high/low fence Standard with a 132” ¾” x 3 TPC Series PS Wood blade

30 ALPHA SERIES HW615

Golden TiN coated worktable

Worktable: the substantial 20" x 20" (508x508mm) cast iron work table is Tintanium Nitride (TiN) coated providing a durable, rust resistant ﬁnish which has an excellent appearance.

31 ALPHA SERIES HW615

Heavy Duty Cast Iron Flywheels and Reinforced Structural Steel Frame

Dynamically balanced cast iron flywheels provide smooth operation, extra torque and minimum noise when running.

The reinforced solid steel frame insures the stability needed for extraordinary performance.

32 ALPHA SERIES HW615

Extra large Precision Hi-Low Fence with solid T-square Structure

Fence: the fence has been upgraded to a extra-large precision Hi-Low fence of 6”, which is made of high strength extruded aluminum. The position of the fence can be changed to accommodate the size of the work piece. In the vertical position, the fence provides stability for re-sawing applications.

Rail: the rail has been upgraded to a structural steel tube providing additional strength and rigidity and allowing for more precise settings. The solid T-square structure is easily adjustable and allows the fence to slide smoothly.

Fence

High Fence Low Fence Rail

Rail

33 ALPHA SERIES HW615

Full Enclosure Protection for Blade

Guide Post: upgraded to all-steel construction, the guide post provides full coverage preventing accidental contact with the blade.

34 ALPHA SERIES HW615

Ball Bearing Blade Guides feature Tool-less Adjustment

Ball Bearing Blade Guide: this patented new system incorporates a ball bearing on each side and the back of the blade, which improves the wear resistance and work life of the machine. The tool-less adjustment and lock knobs are thoughtfully designed to provide easy access and use. Both top and bottom guide sets utilize this system.

35 ALPHA SERIES HW615

Cast Iron Worm Gear Tilting System

Tilting table: a worm-gear dual trunnion system offering precise adjustment from 45 degrees to -15 degrees using a heavy duty hand wheel. It is easy to operate and the gas piston assists the user in making micro adjustments to the large table.

45°

Table Tilt to 45° Worm-geared Trunnion System

36 ALPHA SERIES HW615

Both Doors have Safety Switches

Safety Shut Offs for Both Doors：the upper and lower cabinet doors are equipped with safety switches which automatically shut off the machine when a door is opened.

Foot Brake: immediately stops the saw blade when needed.

Cabinet Door (Upper) Micro-switches On the Top and Bottom Doors

Foot Brake

Cabinet Door (Lower) Foot Brake

37 ALPHA SERIES HW615

Switch: The magnetic switch is lockable and can also prevent overheating of the motor.

Motor：the 3 HP TEFC, industrial grade motor supplies robust power needed for the large capacities of this band saw.

Switch

Motor

38 ALPHA SERIES HW615

Uncompromised Details

Dust Brush: the dust brushes in the lower cabinet remove the dust and chips to ensure consistent blade speeds and reduce slippage.

Tool Rack: the tool rack conveniently placed on the frame makes the most commonly used tools readily available.

Dust Ports: the HW615 upgraded version is equipped with two 4" (100 mm) Dust Brush Tool Hook dust ports. A solid cover is included so that one port can be closed for higher efﬁciency at the second port.

Dust Hood

Dust Ports

39 ALPHA SERIES HW615

Tension Label: a laser-engraved label has been added to the frame.

Handwheel Handle: upgraded with Chromium for its hardness, resistance to corrosion and its aesthetics. The handwheel includes a handle for ease of operation.

Door Locking Knob: upgraded to a knurled knob for its beauty and to ensure an anti-slip grip.

Frame Color Tension Label

Blade Tension Handwheel Door Locking Knob Handle

40 ALPHA SERIES HW615

Speciﬁcations Item NO.: 701061

Motor(TEFC) 3 HP, 220 V, Single Phase, 60 Hz Resaw Capacity 14 "

Flywheel Diameter 15 " Linear Speed 3740 SFPM

Blade Length 132 " ( 131 " - 133 " ) Base Size 25-1/4 " x17-3/4 "

Blade Width 1/8 " - 1 " Table Size 20 " x20 "

Throat Depth 14 " Table Height From The Floor 34-1/4 "

Fence Height(Low Position) 1/2 " Net Weight 441 Ibs

Fence Height (High Position) 6 " Total Weight 485 Ibs

Machine Height 72 " Packing Dimension 30 " x26 " x77 "

UL Standard Certif ied

41 ALPHA SERIES HW303

HW303 3HP Deluxe Wood Shaper

Harvey HW303 deluxe Wood Shaper has been dedicatedly designed and engineered with almost all the features you can imagine on a ﬁne wood shaper, including extra heavy duty cabinet, heavy duty dovetail spindle lifting system, massive and accurate cast aluminum fence system with safety guards and ﬁne adjustments, powerful 3HP TEFC motor, precision spindle, large TiN coated table and centralized control panel.

Designed to be life-time helps for woodworkers everywhere, thousands of Harvey HW303 Deluxe Wood Shapers have been used worldwide by happy customers.

Features and Beneﬁts 22" x 28-1/2" TiN coated table Industrial 3HP TEFC motor Spring cushion system for ease of spindle lifting Heavy duty self contained spindle lifting system Solid Dovetail guide-ways for superior accuracy and durability Luxury industrial grade fence system for accurate position Built-in 4" dust collection port on fence housing Control panel with 4-speed indicators is convenient for operator Magnetic safety switch and thermal overload protection

42 ALPHA SERIES HW303

TiN Coated Table

The superb rust prevention and less friction can be achieved by the permanent PVD coating on the entire table top with Titanium Nitride (TiN).

The 22" x 28-1/2" cast iron table provides much safer cutting.

43 ALPHA SERIES HW303

Industrial Grade Motor with Safety Switch

3HP TEFC Motor The industrial grade motor can provide powerful and long-term performance even in the toughest conditions.

Magnetic Safety Switch The magnetic safety switch with thermal overload protection can prevent the motor from being damaged by overheating.

3HP TEFC Motor Magnetic Safety Switch

44 ALPHA SERIES HW303

Heavy Duty Spindle Lifting System Spring Cushion System The spring cushion system can minimize the backlash, which makes the lifting of spindle much easier and smoother while lifting the spindle.

Solid Dovetail Guide-ways

45 ALPHA SERIES HW303

1 Adjustable Fence Plates

Improved Safety Devices 1

1 Fence Base

Improved Safety Devices

Fence Base Adjustable Fence Plates

Luxury Industrial Grade Fence System

Improved Safety Devices Fence Base Adjustable Fence Plates The fence is equipped with the router bit guard and the The fence base is made of industrial grade cast Twin adjustable aluminium fence halves can be adjusted feature boards, which can minimize the risk of accidental aluminium which provides a stable support for the separately. Precision offset adjustment of the fence can contact and kickback. process of cutting. be achieved by the two ﬁne threaded rods. The fence can also be adjusted laterally, which provides more safety by reducing the opening. 46 ALPHA SERIES HW303

User-friendly Control Panel

The control panel is equipped with 4 speed indicators . The selection of rotating direction , the start and stop and the adjustment of speed are all integrated in this control panel, which can greatly improve your working efﬁciency. The upper position of the control panel provides a much easier and safer operation.

Built-in Dust Collection Port

The built-in 4” dust collection port on fence housing ensures a clean and enjoyable turning.

47 ALPHA SERIES HW303

Speciﬁcations

Item HW303

Item NO. 804702

Main Work Table 22" x 28-1/2" 558 x 725 mm

Extension Wing 9" x 28-1/2" 230 x 725 mm

Insert Opening Dia. 2-1/2", 2-3/4", 4", 5-1/2" 64 ,70 ,100 ,140 mm

Spindle Size 3/4", 1-1/4" 35 mm

Spindle Speed 1700/3600/8500/11000 RPM 1400/3000/7000/9000 RPM

Max. Tool Height 5-1/2" 140 mm

Spindle Travel 4" 100 mm

Fence Plate Sizes (2) 17" x 5" (Aluminum) 432 x 127 mm (Aluminum)

Fence Dust Port Dia. 4" 100 mm

Miter T-Slot 3/4" x 3/8" 19 x 9.5 mm

Belt V-belt V-belt

Main Motor (TEFC) 3HP/230V/60Hz/1PH 2.2kW/230V/50Hz/1PH

Worktable Height 34" 860 mm

48 US Operations Headquarter Bridge City Tool Works Harvey Industries Co.,Ltd. Harvey Industries International DBA Harvey Industries

Add. : 68-10 Suyuan Avenue,Jiangning District,Nanjing 210000,China Add. : 10830 Ada Ave. Montclair, CA. 91763 TEL: 086-025-8666 8191 / 8192 / 8193 / 8198 / 8199 TEL: 1-800-253-3332 E-mail: [email protected] E-mail: [email protected] Web: www.harveymachinery.com Web: www.harveywoodworking.com