DOCSLIB.ORG

Autotrack Roads Ve Autotrack Roads

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Autotrack Roads Ve Autotrack Roads AutoTrack Roads Vehicle Swept Path Analysis: Feature Comparison We’re so confident in AutoTrack that we invite you to compare it with any other swept path package and discover for yourselves why AutoTrack leads the way ! Your Current Feature Software AutoDrive: A point and click driving system with options to turn through an arc for a smooth wide turn or onto a selected bearing for corners. Dynamic Editing: A feature that allows you to edit ANY vehicle path intuitively using grip editing without having to redo them from scratch. Side and Exit Overturns: Models side and exit overturns with easy dynamic editing. All turns can be grip-edited with no need to repeat. Pre-defined Vehicles: Includes around 1000 pre-defined national design and real vehicles and access to our online vehicle library with hundreds more vehicles. “Awesome” Vehicle Wizard: Super-fast vehicle creation or editing using the vehicle wizard. The Roger Weld Advanced Editor lets you define more complex vehicles. New York State DoT Complex Steering Linkages: Models vehicles with complex linked steering arrange- ments including linkages that vary with speed and / or linked angle. Independent Secondary Steering: Models vehicles with fully independent secondary steering as used on bridge beam or wind farm blade carriers. FREE! 2D and 3D animation: Multi-vehicle animation with acceleration and export to AVI movie file. Drivers eye view and tracking camera options. Supports all vehicles. Vertical Clearance: Includes Vertical Clearance mode to easily check and asses headroom and ground clearance. Supports multiple front/rear axles. Complex Axles: Supports non-identical axles, axle spacing, wheels, wheel spacing, pendel axles, tandem axles, stub axles, castor wheels, raised axles and more. Vehicle Capability Compliant: Strict compliance with vehicle capabilities under all circumstances. Some systems allow excessive steering when reversing for example. Safety Margin: User controlled safety margins!... AutoTrack creates accurate paths and allows the user to limit vehicle capabilities to create safety margins. Limit Vehicle Capabilities: Limit the vehicle steering or articulation angles by percentage or absolute value. Limit inner, outer or centreline turning radius. Specialist Vehicle Library: Includes free library of special vehicles with wind farm component carriers, bridge beam carriers and many specialised vehicles. Complex Bodies: Unlimited simple or complex body or load outlines. Build outlines from simple shapes or import complex outlines from a drawing. Variable Turn Transitions: Multiple transition types including speed, distance, arc and disabled. Any number of forward / reverse turn transitions on a path. Path Editing: Powerful path editing commands with grip-editable start or end trim, initial vehicle orientation, steering and articulation angles. Standard Compliant: Compliant with TAC and AASHTO handbook recommendations for limiting turning radii. AutoTrack Roads Vehicle Swept Path Analysis: Feature Comparison Feature Path VehicleAnalysis: Swept Manual Drive: Legacy drive mode that allows real-time control of vehicle speed and direction using mouse. www.savoy.co.uk Your Current Languages: Feature Software English US English Visibility Sightlines: Display fixed or speed dependent sightlines at selected French locations along a path. Spanish German Template Wizard: Create standard turn templates for any vehicle with user-defined Italian Portuguese angle, radius, overturn parameters and model settings. Report Wizard: Easy to use report wizard to create and edit vehicle swept path Formats covering paths, annotation, vehicle diagrams and graphs. Compatible with: AutoCAD R14-2013 (32/64 bit & all verticals) Settings Wizard: Allows definition of settings before or after path creation along with Civil 3D 2006-2013 control of default values. Access to advanced settings editor. MicroStation 95-v8i SS3 Follow Drive: Follow a line drive mode for well defined manoeuvres with options to PowerDraft 7-v8i SS2 PowerCivil XM-v8i SS2 track line or vertices and ‘follow as closely as possible’. PowerInRoads v8i SS2 PowerGEOPAK v8i SS2 Project Auditing: Includes Audit tool which highlights potential problems with your MX XM-v8i SS2 AutoTrack projects. MX Roads XM-v8i SS3 BricsCAD 11-12.2 AutoCAD Civil 3D: Animate 3D vehicles with true height, width and length on surfaces, check vertical clearance on profile views. Kerb detection in 2D. SavoyCAD (Supplied) Windows XP-7 Data Sharing: Single click option to share vehicle libraries between users locally or (32/64 bit) on network (LAN or WAN). Compatibility: Supports all versions of AutoCAD from R14, all versions of MicroStation from 95 and BricsCAD 11 onwards. See full list in margin. FREE! SavoyCAD: Supplied with a CAD system within which you can run AutoTrack even if you don’t have AutoCAD, MicroStation or Bricscad. Completely free of charge! Data Portability: Transfer paths and/or settings between CAD hosts using export / import functionality. Automatic Updates: Automatic updating checking with new feature and bug fix notification prior to download and installation. Support, Maintenance & Upgrades: Optional contracts offer free program updates (including major versions) and free support via, email, telephone or fax. Savoy Computing is an Autodesk Industry Partner Context Sensitive Help: Fully indexed, context sensitive and searchable help system. Embedded Data: All data stored in drawing so there are no additional files to transfer or archive. AutoTrack Tutor: Optional permanently displayed context sensitive program guidance. Multi-Lingual: Available in six languages, English, French, German, Spanish, Italian & Portuguese. Change language at run-time. Hardware Lock Protected: To run AutoTrack on another computer, just move the dongle. Network version uses a server dongle with monitor to locate licences. Impeccable Credentials: Autodesk have selected Savoy as one of just 14 AEC Industry Partners worldwide. That’s some recommendation! Savoy Computing Services Ltd Clermont House High Street Cranbrook So... Kent, TN17 3DN ...how did we do? UK T:+44(0)1580 720 011 F:+44(0)1580 720 022 E: [email protected] W: www.savoy.co.uk US: +1 866 527 3790 www.savoy.co.uk .
Load more

Recommended publications
  • Download CMS Intellicad® Brochure
    CMS IntelliCAD® Premium Edition (PE) & Premium Edition Plus (PE Plus) CAD Software Affordable, Powerful & Compatible Key Points CMS IntelliCAD® Compatible CAD Software is the Unrivaled Autodesk® AutoCAD® Compatibility intelligent and affordable full-featured choice for Native .dwg file support, including version 2.5- 2018/20 engineers, architects and consultants, or anyone who Add Digital signaturesNEW to .dwg files. communicates using CAD drawings. AutoCAD 3D surface commands. CMS IntelliCAD is designed to give you unrivaled Spatial® ACIS (.sat) 3D solids import and export*. compatibility with Autodesk® AutoCAD®, and is fully ACIS 3D solids modeling*. programmable with hundreds of third party solutions. Autodesk Development System (ADS) unicode support. CMS IntelliCAD also offers a full suite of 2D and 3D LISP support (including .DCL). AutoCAD compatible drawing tools. CMS IntelliCAD also Support for AutoCAD command line. provides a high degree of compatibility with the AutoCAD Digitizer Support. command set, as well as AutoLISP and ADS and built-in AutoCAD menu (.MNU) and script (.SCR) files. Microsoft VBA. Raster image display. You can get to work immediately using your *.dwg files, commands and applications you rely on. Exceptional Productivity & Customization Photo-realistic 3-D rendering, Visual Styles & Materials. What's new on v10.0 Advanced photo-realistic rendering with Artisan render. Ribbon tabs interface combined with Menus & Toolbars. CMS IntelliCAD® 10 CAD Software is a major release CUI support for Ribbon tabs interface customization. providing new features and improvements , now also ActiveX support including in-place editing. provided as Perpetual Standalone and Network versions. Drawing Explorer™ for managing layers, blocks, line types, and Free 15 days trial available.
    [Show full text]
  • DXF Reference
    AutoCAD 2012 DXF Reference February 2011 © 2011 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Intent, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Beast, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, Illuminate Labs
    [Show full text]
  • Welcome to the Bricsys Newsletter
    Bricsys Newsletter Q1 - 2013 Welcome to the Bricsys Newsletter Our goal is to make this a quarterly newsletter The road to BIM: Bricsys is committed to explore the limits of Bricsys Strategy for Mechanical Design: Bricsys’ answers to the to provide you with what can be done for BIM within the familiar dwg environment. different MCAD challenges with 3D direct modeling in BricsCAD. interesting news about the CAD market in general as well as the BricsCAD platform and the solutions from our Third Party development partners. The Bricsys Team The BricsCAD re-branding Artisan for BricsCAD, 2012 International The World’s Oldest CAD and miscellaneous creating realistic images Conference summarized by Operator uses BricsCAD. click to © 2013 by Bricsys updates. from BricsCAD models. the CAD analyst community. navigate ! Bricsys Newsletter AECQ1 CORNER - 2013 The road to BIM By Erik de Keyser Over the last several years Bricsys evolved from an alternative CAD provider In a BIM all AEC disciplines add their specific info to the model in order to: to a leader in bringing about the next generation dwg environment unifying deliver a digital representation of the complete building as conceived, 2D drawing and 3D direct modeling. While there still are many challenges including all the technical disciplines needed for making the building ahead on the road to deliver top-notch solutions for the mechanical market, operational when physically constructed (design phase) we are now ready for our next challenge in the AEC space. hand-over this digital information to the contractors for construction of Several of us at Bricsys have been involved with BIM in the past, developing the building, add information about modifications along the construction TriForma for MicroStation in the 90s and Architecturals for the dwg space in process and make the BIM “As Build” (construction phase) the 00s.
    [Show full text]
  • Bricscad® V15 for Autocad® Users
    BRICSCAD® V15 FOR AUTOCAD® USERS Ralph Grabowski BRICSYS Payment Information This book is covered by copyright. As the owner of the copyright, upFront.eZine Publishing, Ltd. gives you permission to make one print copy. You may not make any electronic copies, and you may not claim authorship or ownership of the text or figures herein. By Email Acrobat PDF format: $19.60 Allow for a 17MB download. PayPal Check or Money Order To pay by PayPal, send payment to the account We can accept checks from the following of [email protected] at www.paypal.com. regions of the world: • US funds drawn on a bank with address in the USA. PayPal accepts funds in US, Euro, Yen, • Canadian funds drawn on a bank with a Canadian Canadian, and 100+ other currencies. address (includes GST). • British funds drawn on a bank in Great Britain. • Euro funds drawn on a bank located in the EU. Make cheque payable to ‘upFront.eZine Publishing’ Please mail your payment to: “BricsCAD for AutoCAD Users” upFront.eZine Publishing, Ltd. 34486 Donlyn Avenue Abbotsford BC V2S 4W7 Canada Visit the BricsCAD for AutoCAD Users Web site at www.upfrontezine.com/b4a. At this Web page, editions of this book are available for BricsCAD V8 through V14. Purchasing an ebook published by upFront.eZine Publishing, Ltd. entitles you to receive the upFront.eZine newsletter weekly. To subscribe to this “The Business of CAD” newsletter separately, send an email to [email protected]. Copyright Information Copyright © 2014 by upFront.eZine Publishing, Ltd. All rights reserved worldwide. Seventh edition based on BricsCAD V15 23 November 2014 Technical Writer Ralph Grabowski All brand names and product names mentioned in This book is sold as is, without warranty of any kind, either this book are trademarks or service marks of their express or implied, respecting the contents of this book and respective companies.
    [Show full text]
  • Important Notes for DWG to DGN Conversions
    Important notes for DWG to DGN conversions Some issues/differences in the functionality of AutoCAD and MicroStation will present issues with the drawing conversions that could either not be resolved programmatically, or have been deemed too difficult/time consuming to resolve for the LaDOTD environment. Some of these issues are outlined below: Cells / Blocks The blocks used in the DWG block libraries were created by converting the LaDOTD MicroStation cell library files. Data Fields are used in a number of the MicroStation cells (e.g. title blocks); however there is no direct equivalent for Data Fields in AutoCAD. There is currently no workflow equivalent for this for using AutoCAD with LaDOTD projects so any required Data Field information will need to be entered after the files are converted to MicroStation. If you are not using the Altiva supplied MVBA to convert the DWG files to DGN (see the convert section below) you should check the filter settings for the file conversions. You will need to uncheck the Shared Cells flag in the remapping filter so that the Shared Cells from AutoCAD will change to normal cells in MicroStation. LIN file / RSC symbology The LaDOTD linestyles used for AutoCAD have an “-AC” suffix on their names. This is to help with conversions to MicroStation DGN format. Without the rename, MicroStation would simply load the LIN file version of these line styles and no conversion would occur. In order to force the conversion back to the RSC version of the line style, different names for line styles are required. This is not the case going from DGN to DWG as the LIN file is defined in the mapping translation file.
    [Show full text]
  • Gestión De Proyectos De Instalaciones De Telecomunicaciones
    2b Elaboración de planos y esquemas LibreCAD GESTIÓN DE PROYECTOS Módulo: DE INSTALACIONES DE TELECOMUNICACIONES SISTEMAS DE TELECOMUNICACIONES Ciclo: E INFORMÁTICOS Resultados de aprendizaje: RA2: Elabora planos y esquemas de instalaciones de telecomunicaciones, dando respuesta a la configuración de las instalaciones y manejando programas informáticos de aplicación. Actividades prácticas y ejercicios: Los contenidos se complementarán con ejercicios y actividades prácticas para desarrollar las competencias profesionales. Se desarrollaran según las indicaciones del profesor y/o las recogidas en los guiones de prácticas. Se prestará especial atención a su realización, su documentación y se respetará los plazos de entrega. Se realizarán una serie de actividades en formato CAD utilizando el software de diseño vectorial “LibreCAD”. Equipo de clase: Se asistirá con el material necesario para tomar notas y apuntes en clase. Se recomienda el uso de una memoria usb personal para los archivos de prácticas, etc… ya que los equipos informáticos son compartidos y no se garantiza la integridad de los archivos guardados. Bibliografía y material para ampliar conocimientos: o Software libre LibreCAD. Descarga para instalar en: http://librecad.org o Manual de Qcad. Disponible en: http://www.ribbonsoft.com Existe además en Internet abundante información y cursos relacionados de nivel básico y avanzado en CAD, tanto en 2D como 3D. Conocimientos previos: Conceptos básicos de dibujo técnico. Los impartidos en los otros módulos, en especial sobre las instalaciones de telecomunicaciones. 0 CONTENIDOS 0 Contenidos ..................................................................................................................... 3 1 Imágenes Vectoriales versus Mapas de Bits ................................................................. 4 1.1 Software de Diseño asistido por ordenador (CAD) .................................................... 5 1.2 Software de CAD de mayor difusión .........................................................................
    [Show full text]
  • Autotrack Rail Brochure
    AutoTrack Rail Brochure 1 AUTOTRACK RAIL VEHICLE SWEPT PATH ANALYSIS FOR LIGHT RAIL VEHICLES › LIBRARY EXPLORER DATA SORTING Find the right vehicle quickly with sortable data columns in the Library Explorer. Swept path analysis for trams and other rail vehicles Check and assess the movements of trams and other light rail vehicles. With features like the Report Wizard, 3D animation and a library of world-wide trams it must be the easiest tool available to model tram movements. Use it with Au- toTrack Roads to model other road going vehicles. › AUTOMATIC GUIDED DRIVE Use the fully automatic Guided Drive to model the path of any railed vehicle, including those with suspended units, along defined rails. AutoTrack monitors Extensive library of vehicles the vehicle at every step and ensures that at no time does the vehicle exceed its turning capabilities. You can decide which data is relevant to you and display only those columns. It’s even possible to compare vehicles in different libraries. › CLEAR, CUSTOMISABLE PRESENTATION FORMATS Present your ideas in one of the built-in formats or create your own named for- mat using the Report Wizard. Manage unlimited user definable reports, each of which may be switched on or off at any time during or after path generation to illustrate specific points. Two offset envelope reports allow you to model clearance or safety envelopes and a special pantograph report allows you to track the path of the pantograph independently of the rest of the vehicle. Use with Roads version to model trams interacting with cars and other traffic › › INCLUDES INTERNATIONAL TRAM LIBRARY AutoTrack includes a library of trams used in schemes from around the world.
    [Show full text]
  • Choosing the Right HP Z Workstation Our Commitment to Compatibility
    Data sheet Choosing the right HP Z Workstation Our commitment to compatibility HP Z WorkstationsPhoto help caption. you handle the most complex data, designs, 3D models, analysis, and information; but we don’t stop at the hardware—we know that leading the industry requires the best in application performance, reliability, and stability. Software certification ensures that HP’s workstation hardware solution is compatible with the software products that will run on it. We work closely with our ISVs from the beginning – both in the development of new hardware and in the design of new software or a software revision. This commitment to partnership results in a fully certified HP Workstation ISV solution, and ensures a wholly compatible experience between hardware and software that is stable and designed to perform. In this document, HP Z Workstation experts identify the workstations recommended to run industry specific applications. While many configurations are certified for each application, our reccomendations are based on industry trends, typical industry data set sizes, price point, and other factors. Table of contents Architecture, Engineering, and Construction ..................................................................................................................... 2 Education .................................................................................................................................................................................. 3 Geospatial ................................................................................................................................................................................
    [Show full text]
  • Autotrack Roads Brochure
    AutoTrack Roads Brochure 1 AUTOTRACK ROADS VEHICLE SWEPT PATH ANALYSIS › OTHER DRIVE MODES Use Manual Drive for fine control on tight manoeuvres. Use Script to create The world’s most advanced vehicle turn simulation program and save tightly defined manoeuvres which can be re-used with different vehi- Predict the swept path of steered vehicles at loading bays, junctions, rounda- cles each time. Use the Template tool to you generate turns with user-defined bouts, petrol forecourts & service areas. With built-in design vehicles, support for radii, angles and over-steer to check simple turns. Use Follow to track lines, complex user-defined vehicles, multiple drive modes, customisable presentation arcs, polylines or splines. options and compatibility with the leading CAD systems, AutoTrack is used daily by thousands of engineers around the world. › ACCURATE PATH ALGORITHMS Whichever drive mode you use AutoTrack prevents wheels or articulation an- › FIVE INTERCHANGEABLE DRIVE MODES gles from exceeding the specified limits, even momentarily. It also calculates Switch live between five interchangeable drive modes, AutoDrive, Manual speed dependent transitions at the entry and exit points of turns and between Drive, Script, Templates or Follow, according to task or preference, or park all turns both forwards and reverse unless explicitly over-ridden by the user. stationary vehicles. › MAKE ADJUSTMENTS INTERACTIVELY › AUTODRIVE WITH OVERSTEER OPTIONS (PRO VERSION ONLY) Editing your paths dynamically using grips is an incredibly powerful feature that is Use the point and click AutoDrive to generate vehicle movements intuitively. unique to AutoTrack. It allows changes to be made to the path alignments as the Two modes let you generate smooth arc turns or more abrupt bearing turns project develops, using the original settings and vehicle capabilities, without hav- with or without side and/or exit oversteer.
    [Show full text]
  • A Partnership in Traffic Engineering
    A partnership in traffic engineering • Autodesk AutoCAD Civil 3D Preferred Industry Partner products are built on Autodesk application programming interfaces (APIs) and meet rigorous functional, • AutoTrack performance, and quality guidelines. Autodesk works closely with its Preferred Industry Using enhanced path prediction algorithms, Partners to combine the resources, ideas, Savoy Computing Services has teamed up with and creative thinking of these trailblazing AutoCAD® Civil 3D® software to deliver companies, keeping Autodesk products and AutoTrack—a suite of design transportation solutions on the leading edge of performance analysis tools. By giving traffic engineers and and value. planners the ability to incorporate a time element, AutoTrack generates accurate swept paths at About Autodesk specific speeds and in turn, reflects the limitations Autodesk, Inc. is the world leader in 2D and of a real vehicle. A seamlessly integrated 3D design 3D design software for the manufacturing, environment gives designers the ability to design building and construction, and media and and check road layouts and vehicle access. entertainment markets. Since its introduction AutoTrack for Highway Design allows users to of AutoCAD® in 1982, Autodesk has developed plot vehicle movements, drive interactively using the broadest portfolio of state-of-the-art a simple mouse point and click interface, and digital prototyping solutions to help cus- automatically follow-a-line. tomers experience their ideas before they are real. Fortune 1000 companies rely on AutoTrack for Light Rail Design allows designers to Autodesk for the tools to visualize, simulate, check light rail schemes and ensure that sufficient and analyze real-world performance early in clearance is provided for surrounding infrastructure the design process to save time and money, and buildings.
    [Show full text]
  • Microstation V8
    MicroStation V8 QuickStart Guide DAA020920-1/0001 7UDGHPDUNV $FFX'UDZ %HQWOH\ WKH §%¨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¥ +05 ,QF $OO ULJKWV UHVHUYHG 3RUWLRQV ¥ 67(3 7RROV ,QF 6HQWU\ 6SHOOLQJ&KHFNHU (QJLQH :LQWHUWUHH 6RIWZDUH ,QF 8QSXEOLVKHG ¥ ULJKWV UHVHUYHG XQGHU WKH FRS\ULJKW ODZV RI WKH 8QLWHG 6WDWHV DQG RWKHU FRXQWULHV $OO ULJKWV UHVHUYHG 0LFUR6WDWLRQ 4XLFN6WDUW *XLGH 0LFUR6WDWLRQ 4XLFN6WDUW *XLGH $ERXW WKH 'RFXPHQWDWLRQ 7KH 0LFUR6WDWLRQ RQOLQH KHOS GRFXPHQW FRQWDLQV DOO 0LFUR6WDWLRQ
    [Show full text]
  • Autotrack Manual
    User Manual for AutoTrack Advanced Vehicle Swept Path Analysis Licence agreement This software is the property of Savoy Computing Services Limited. It may be used only under the terms of the Licence Agreement. Disclaimer No warranty is given as to the results or performance of this Software. The User is responsible for satisfying himself that the Software is suitable for his purpose and performs in accordance with the claims in the User Manual. It is assumed that the User is a competent practitioner who is experienced in the theories and techniques upon which the Software is based. Copyright notice This software is the copyright of Savoy Computing Services Limited. © Savoy Computing Services Limited (1991-2010) AutoCAD is a registered trademark of Autodesk, Inc. MicroStation 95, MicroStation SE, MicroStation /J, MicroStation V8 & MicroStation XM are trademarks of Bentley Systems Incorporated. Savoy Computing Services Limited Clermont House High Street Cranbrook Kent TN17 3DN England Tel : +44 (0)1580 720 011 Fax : +44 (0)1580 720 022 US: 1-866 527 3790 Eml: [email protected] Web: http://www.savoy.co.uk May 10 Contents Installing AutoTrack 1 AutoTrack hardware lock ..............................................................................................1 Authorisation code ........................................................................................................2 Licences ........................................................................................................................2 Single user licences .........................................................................................2
    [Show full text]