COMMUNICATIONS PROPOSAL FOR SHELBY COUNTY
PRESENTED BY Cindy Sorum 01/11/10
January 8, 2010
Bob Seivert Shelby County E911 Service Board 612 Court Street Harlan, IA 51537
Dear Bob:
The following document is RACOM’S proposal for the communications systems/services you are considering.
You had requested pricing for some additional licensing to include: a Fire Ground Frequency - $300; and (2) UHF mobile only frequencies - $500.
The systems proposed are based on our many discussions, propagation studies and design reviews by RACOM Engineering and our knowledge of Shelby County’s specific requirements.
All prices quoted include State Contract discounts.
We value our relationship with Shelby County and are committed to the successful implementation of this project.
Best Regards,
Cindy Sorum
Cindy Sorum Business Development Manager RACOM CORPORATION
TABLE OF CONTENTS
SECTION 1 – Zetron Series 4000 Radio Console • Systems Description • Pricing • Literature
SECTION 2 – Zetron Series 3300 VoIP 911 Phone System • Systems Description • Pricing • Literature
SECTION 3 – Norstar Administrative Phone System • Pricing • Literature
SECTION 4 – Door Access Control System • Pricing • Literature
SECTION 4 – Narrow Banding • Site Infrastructure Replacement and Reprogramming Pricing • Mobiles, Portables and Pagers Reprogramming Pricing • Mobiles, Portables and Pagers Equipment Inventory • Literature
SHELBY COUNTY ZETRON CRT CONSOLE SYSTEM DESCRIPTION
The ZETRON Integrator RD Console is the most flexible user-friendly communications console on the market today. The console designed for Shelby County is a CRT based Windows XP console, which consolidates all operation into one efficient package.
The design includes two individual dispatch positions with a maximum of 15. It can control a combination of 48 separate radio channels or trunked talk-groups. Each console position can be programmed to present the screen layout most desirable for the individual dispatcher. Monitors will display the current status and activity on all channels. System control will be via a three-button mouse. System software includes the extended paging package with two-tone sequential signaling and full featured MDC-1200.
The 4219 audio panel includes the select and unselect speakers with volume control and LCD screen for the VU meter. The rugged desktop microphone utilizes a gooseneck style boom on a heavy metal base.
Each position is equipped with two telephone/radio headset jack boxes that will automatically arbitrate between phone and radio and provide supervisory control or training capacity via a second jack box wired in parallel.
Console spare cards are included in the quote. The console is equipped with an auxiliary input/output card to provide console door control.
One equipment rack has been included to accommodate the console CEC hardware and power supplies.
RACOM will stage the console prior to installation and provide all dispatcher training per a mutually agreed upon schedule.
Cindy Sorum Proposal Prepared for: SHELBY COUNTY EMERGENCY MGMT. 5700 Culwells Rd. Address 612 COURT STREET Lincoln, NE 68516 City HARLAN 402-489-9911 - Phone State & Zip Code IA 51537 County SHELBY 402-483-0365 - Fax Phone/FAX 712-755-5160 [email protected] Contact Name BOB SEIVERT Contact E-mail [email protected]
Zetron Series 4000 Radio Dispatch Console ITEM QTY PART NO. DESCRIPTION UNIT EXTENDED 1 1 OPERATOR POSITION 2 POSITION BUNDLED 4048 RD INCLUDES: (2) INTEGRATOR RD CLIENTS, (2) RD/M 4219 $ 108,675.50 $ 108,675.50 BUNDLES WORKSTATIONS, (2) SYSTEM TRAFFIC CARDS, (2) M4048 POWER SUPPLIES, (1) M4020 CCE,$ - $ - (2) M4048 CONSOLE INTERFACE CARDS, (4) S4000 DUAL UNIVERSAL CONTROL CARDS AND$ - $ - MANUALS $ - $ - $ - $ - 2 2 OPERATOR POSITION (2) INTEGRATOR RD EXTENDED PAGING PACKAGE $ - $ - SOFTWARE OPTIONS (2) INTERGRATOR RD MDC-1200 FULL FEATURE $ - $ - $ - $ - 3 2 OPERATOR (3) TELEPHONE/RADIO HEADSET INTERFACE $ - $ - ACCESSORIES (1) DUAL TRHI CONNECTOR $ - $ - (2) FOOTSWITCH $ - $ - $ - $ - 4 2 DESKTOP (2) DESKTOP GOOSENECK MICROPHONE $ - $ - MICROPHONE $ - $ - $ - $ - 5 1 COMMON CONTROL (1) M4048 CONSOLE INTERFACE CARD CAGE $ - $ - EQUIPMENT (1) M4048 CHANNEL INTERFACE CARD CAGE $ - $ - (1) M4048 POWER SUPPLY (SPARE) $ - $ - $ - $ - 6 1 RADIO CHANNEL (2) DUAL CHANNEL UNIVERSAL T/R CONTROL CARD (1 SPARE) $ - $ - CARDS (4) DUAL CHANNEL TONE/LOCAL T/R CONTROL CARD $ - $ - (2) HARRIS EDACS WIRELESS DUAL CHANNEL T/R CARD (1 SPARE) $ - $ - (3) HARRIS EDACS WIRELESS INTERFACE MODULE (1 SPARE) $ - $ - $ - $ - 7 1 CONTROL AND (2) AUXILIARY INPUT/OUTPUT INTERFACE CARD (1 SPARE) $ - $ - ADAPTOR CARDS (1) SYSTEM TRAFFIC CARD (SPARE) $ - $ - (1) CONSOLE INTERFACE CARD (1 SPARE) $ - $ - Total Equipment Price$ 108,675.50 Installation$ - Terms of Purchase: Net 30 Subtotal $ 108,675.50 Tax Rate Taxes$ - Payment with Order: $22,500 Shipping$ 250.00 Approximate Delivery Date: 4-6 weeks Total $ 108,925.50 If applicable, product warranty: One year parts Proposal is valid for 60 days from the date listed below
System Description: Customer will provide (3) monitors for the system
Proposal Presented By: Cindy Sorum Date: 01 07 10
Proposal Accepted By: Date:
Shelby County Series 4000 Quote rev. 2 01 07 10.xls - Printed 1/7/2010 Page 2
ITEM QTY Part No. DESCRIPTION UNIT EXTENDED CONTROL ADAPTOR (13) CONSOLE CARD SLOT COVER $ - $ - CARDS CONTINUED (6) CHANNEL CARD SLOT COVER $ - $ - $ - $ - 8 1 COMMON (4) S4000 DUAL CHANNEL MEMORY OPTION - FOR MDC $ - $ - CONTROLLER $ - $ - OPTIONS $ - $ - $ - $ - 9 1 INSTALLATION (11) 25-PAIR CABLES $ - $ - COMPONENTS (8) CONNECTORIZED PUNCHDOWN BLOCKS $ - $ - $ - $ - 10 3 SYSTEM MANUALS MODEL 4048 SERVICE MANUAL, INTERFACE CARDS MANUAL, DISPATCH CONSOLE MANUAL$ - $ - $ - $ - 11 1 HEADSETS (2) 6-WIRE NOISE CANCELLING WIRELESS HEADSET BASE $ - $ - (6) NOISE CANCELLING HEADSET TOPS $ - $ - $ - $ - 12 1 RACK EQUIPMENT RACK WITH SHELVES AND 12-OUTLET POWER STRIP $ - $ - $ - $ - $ - $ - $ - $ - 14 1 EXTENDED YEAR ONE - WARRANTY + LABOR = $1,200 $ - $ - WARRANTY YEAR TWO - HARDWARE, SOFTWARE AND LABOR - $4,920 $ - $ - YEAR THREE - HARDWARE, SOFTWARE AND LABOR - $4,920 $ - $ - YEAR FOUR - HARDWARE, SOFTWARE AND LABOR - $4,920 $ - $ - YEAR FIVE - HARDWARE, SOFTWARE AND LABOR - $4,920 $ - $ - $ - $ - $ - $ - $ - $ -
Shelby County Series 4000 Quote rev. 2 01 07 10.xls - Printed 1/7/2010 series 4000 communications control system
Integrator RD Model 4020 CCU Model 4048 CCU
Communications Control System Common Control Units (CCU) The Series 4000 is a programmable, multichannel, multi- position radio control console featuring three operator The CCU is the central “switch” that routes audio position styles to meet a variety of user needs. between radio/phone channels and console operating positions. Series 4000 CCUs are available in two • Public Safety capacities to match your application needs. • Police/Fire • EMS/Ambulance • EOC/Disaster Management Centers ccu channel operating cross Channel • Government model capacity Positions Patches • Transportation 4020 20 6 8 4048 48 16* 24 • Aviation • Mass Transit • Maritime • Railways *15 with patch card installed • Utilities Consoles • Energy • Fresh/Waste Water The Series 4000 can be controlled and monitored • Oil/Gas • Electric from up to sixteen console operator positions. Three • Facilities Safety & Security different styles of console positions are available • Healthcare • Corporate/College Campuses and may be mixed in the same system: rackmount, • Casinos • Hotels/Resorts desktop, and PC-based consoles.
System overview Designed for Reliability Depending on the application, the Series 4000 can The Zetron Series 4000 Communications Control be configured for “no single point of failure” or full System is a full-featured radio dispatch console for a redundant operation. The Model 4020 and 4048 CCUs, multichannel radio system. It provides operators with an with their dual system buses, may be configured with efficient means of monitoring and dispatching with up to dual system controllers and dual power supplies to 48 radios, both conventional and trunked. A Series 4000 ensure that no single failure will result in a complete system is comprised of a common control unit and one loss of operation. For highly critical applications, or more console operator positions. the Series 4000 CCUs can be configured for full redundant operation. Radio Interface Compatibility of features present on the subscriber unit (including PTT ID), but with the subscriber unit located where needed The Series 4000 is compatible with virtually all for proper RF coverage. For Wireless Console operation manufacturers’ base stations, control stations, and Zetron’s advanced PC-based radio dispatch software, repeaters utilizing local, standard tone or DC control Integrator RD is recommended. protocols. Depending upon the configuration of the radio, these control protocols typically support frequency Because of the wide variety of wireless trunked radio selection, activation of CTCSS tones, main/standby interfaces, Zetron’s Series 4000 is an ideal platform selection, and a host of other functions. The Series 4000 to support communications interoperability. The may also support a variety of trunked radio systems using Series 4000 may be used to patch together two or the Wireless Console concept. more agencies using different trunked radio schemes to communicate with each other. For on-scene The Series 4000 offers exceptional application flexibility communications, a small version of the Series 4000, the to meet a wide range of user requirements. Operating Model 4020, can be installed in a mobile communications position types can be “mixed or matched”, and radios van and used for both tactical dispatching, as well as on- and/or operating positions are easily remoted. scene interoperability patching. wireless consoles & interoperability The following is a list of currently available Wireless Console interfaces. Certain options for designated radios Consoles manufactured by trunked radio system may be required. Call Zetron for details. manufacturers are typically designed to communicate with their trunked radio infrastructure via wired communications Motorola ASTRO® links. While this may provide a few operational advantages • Compatible with Motorola ASTRO® Quantar/Quantro (such as the ability to override a conversation in progress) base stations via the Motorola DIU-3000 digital interface the cost for the additional infrastructure interfaces and the cost of the leased wire circuits can quickly add up. This • Supports conventional, CAI (P25), ASTRO® 25 cost may be justified for a large, main dispatch center, • PTT, channel selection, PL/NAC selection, repeat on/off, but it may be prohibitive for secondary agencies who are coded/clear and encryption key selection sharing the system. The Wireless Console concept allows the Series 4000 EF Johnson 5300 Series to interface to a wide variety of different trunked radio • Compatible with the EF Johnson 531x/532x (VHF), schemes using subscriber units (mobile radios) as 533x/536x (UHF), and 538x (800 MHz) mobile radios control stations. This avoids the extra cost for additional (may not be compatible with the 53SL Series) infrastructure equipment and recurring wireline leases. In • Supports analog and P25 conventional, and most cases, Series 4000 operators can access the full set SMARTNET®/SmartZone®, ASTRO® and P25 trunking • PTT ID, status messaging and 15 control functions including channel/talk-group selection, PL/NAC selection, talk-around on/off, coded/clear and Integrator RD Workstation (w/Model 4219) scan on/off
Local Base Station LAN/WAN Model 4020/4048 Common Control Unit Model 4118/4115 Rackmount Console Remote Base Station/Repeater (leased lines)
Local Control Station
RF/MW Link
Model 4018 Remote Base Desktop Console Station/Repeater (control station interface) Motorola iDEN® is 4 minutes for each channel, and playback is through the Select or Unselect speakers. If a radio call is received • Compatible with the Motorola® R750+ and i325IS during playback, the recorded audio is paused. radios, and ELUTIONS R1600I Emergency Alert/Acknowledge — With mobile and • Supports Nextel® Nationwide Direct ConnectSM or cross- portable radios equipped with MDC-1200 protocol, a user fleet private calls and Nextel® Group Walkie-Talkie (cross can press a button to transmit an emergency ANI signal fleet group calls) on some radio models to request immediate help. Integrator RD provides an • PTT ID, status messaging, call alerts, local area group efficient way for the dispatch to receive the identification calls, target area group calls, and in-fleet private calls information, send an acknowledgment back to the radio, M/A-COM and respond to the emergency. Instant Call Paging — The operator may “tone out” • EDACS® with M/A-COM Orion, Jaguar 725M, and an entire sequence of pages with the press of a single M7100IP radios Instant Call button. A two-level menu allows pages • P25 with M/A-COM M7100IP Radio to be grouped into a logical structure (e.g. “Police”, • Group and local ID display “Fire”, “EMS”) for easy access. Paging sequences are • Group calls, individual calls and emergency calls automatically routed to the proper channel and frequency, minimizing errors. Paging sequences may contain self- MPT 1327 initiating alert tones for indicating specific types of events. The button’s indicators provide a “check list” to verify • Compatible with the Motorola GM1200, Tait T2020, that the proper pages were sent. Multi-format capability 2035, T2040, and TM8255 radios with MAP27 options eliminates the need to have a different encoder for each • New 1327 & Kenwood Radios type of pager/decoder. • Compatible with the Zetron Model 427 for direct Patch — Channels may be patched to other channels or connection to Zetron infrastructure telephone lines. The operator may monitor the patch and • Compatible with the Tait MAP27 Gateway for direct operate on other channels. One patch can involve more connection to Tait infrastructure than two channels. Multiple concurrent patches are supported. Kenwood® TK-x80, TK-x180, and TK-5x10 Simul-Select — The operator may select multiple channels • Compatible with the TK-780/7180, 880/8180, 980 and simultaneously so that one dispatch may be broadcasted 981 radios to several channels at once. Group-Selects may be invoked • Supports LTR® and Passport® (TK-x80 and x180) trunking to select predetermined groups of channels. • Supports P25 conventional and trunking (TK-5x10) Individual Channel Volume — Each channel’s volume may • Supports a subset of Kenwood Fleetsync™ analog be set independently, allowing the operator to prioritize signaling including PTT ID and status ID display listening based on volume level. A digital display shows volume percentage, allowing accurate settings without • 15 control functions including channel or talk group audio present. Minimum audio levels can be programmed selection, monitor, coded/clear and talk-around to avoid missed calls. Feature Summary Mute/All-Mute — Channel muting instantly reduces the volume of a channel to a predetermined level. Removing The Series 4000 was designed to simplify the job of a source of unnecessary traffic helps the operator to operating a multichannel system, allowing operators to concentrate on the task at hand. All-Mute instantly concentrate on the content of their dispatching task. reduces the volume of all non-selected channels at once. Product features include: Call — When channel activity is present, the channel’s Programmable Controls — Button functions are fully “CALL” indicator activates, making it easy to locate the programmable. Each is clearly labeled to provide function source of the call. The call indicator remains on for a few association. All primary functions are performed by a seconds after the activity stops — in case the operator single keystroke. was busy. Up to Three Unselect Speakers — A Select speaker and Busy — Whenever another console is transmitting on up to three Unselect speakers provide a left/right audio the channel, the channel’s “BSY” indicator illuminates. effect, making it easy to distinguish whether the call was This makes it easy for the operator to distinguish parallel from the primary (Selected) channel or another channel. console transmissions from field activity. Selecting a channel moves its monitor audio to the Select Transmit — The operator may transmit over the selected speaker. Unselected audio channels can be divided and channel simply by pressing the “Transmit” button or routed to one of three Unselect speakers by operator by pressing the optional foot-operated transmit switch. selection. With “Instant Transmit”, the operator may transmit over a “Channel Check” Integrated Instant Recall Recorder non-selected channel in order to give a brief reply without Option — The Series 4000 may be configured to provide a changing channel selection. “per channel” instant recall recorder. Recording duration Last-Call Transmit — The operator may transmit on the Rackmount Console — Model last channel that experienced activity, allowing a call to be 4118/4115B answered without knowing the channel that it occurred For users who require a rackmount on. installation or need a console with Volume Enhance — (PC based console only) To help the up to 24 channel capability, Zetron operator focus on important messages, audio on the offers the Model 4118 Dispatch indicated channel may be instantly boosted to an operator- Console and Model 4115B Console Expander. Each unit is controlled, preset level. 5 1/4” high x 19” wide with a panel designed to facilitate Level Meter — The LCD bar-graph level meter shows the mounting in a standard EIA 19” rack. level of the transmitted voice so the operators can speak The Model 4115B Console Expander provides 60 at the proper level during transmissions. The meter also programmable function keys, each with dual LEDs for indicates level when call activity is present on the selected status indication of key functions. At least one Model channel. 4115B is required with each Model 4118. This configuration Coded/Clear — For channels supporting encrypted provides functionality that is identical to that of the Model speech, this allows selection of encrypted or clear voice 4018 with the added advantage of expandability. Up to transmission. Positive Mode Control can be enabled to three Model 4115Bs can be interfaced with a Model 4118, ensure that the proper encryption mode is always being providing as many as 196 buttons for control of channel, used. This supports Motorola Digital Voice Privacy using auxiliary I/O, Instant Call pages, and other functions. late model Motorola fixed RF stations, including those using the Motorola DIU-3000 Digital Interface Unit. PC-Based Console — Integrator RD Workstation The Integrator RD radio Console Intercom — Allows an operator to call and talk dispatch workstation to another console operator within the system without is comprised of a host using the phone or leaving the position. Only the “called” computer, monitor, console is involved; other console operators are not Integrator RD software and affected. either the Model 4217B Auxiliary Input/Output — Operators may control various Audio Panel or the Model contact-closure operated devices (such as lights, door 4219 Audio Interface. The locks, and voter controls) from the console. External inputs Integrator RD workstation (such as voter displays and alarms) may be monitored at is the most sophisticated the console. and largest capacity Alert — Up to four different alert tones may be transmitted operator position in the Model 4217B to indicate the type or priority of the dispatch to follow. Series 4000 family. For applications requiring state of the art performance, the Integrator RD workstation supports Operating Positions multi-tasking, networking, and multiple monitors. The Model 4219 is equipped Desktop Console — Model 4018 with a pair of high quality of For users requiring a compact desktop 5-watt speakers, each with console with styling suitable for an their own volume control office environment, theModel and voice modulated LED. 4018 represents an ideal The Model 4219 slim-line solution. Measuring 9” x 18” x 14” audio panel may be flexibly (HxWxD), the Model 4018 features an attractive two-tone mounted behind, under or clam-shell design with select and unselect speakers, on top of the work surface, clock/audio level meter, volume controls, and a built-in and is sufficiently sized to Model 4219 paging encoder. serve as a stand for 15” and The Model 4018 supports a total of 76 buttons for control smaller LCD video monitors. of system, channel, auxiliary I/O, and paging functions. Operating under a Windows® XP Pro or Windows® Vista Two LEDs adjacent to each channel control button indicate platform, Integrator RD displays up to 36 channels on a status of the various channel functions and auxiliary I/O single screen, providing a compact and intuitive means of devices. controlling even the most complex radio system. Although the Model 4018 can handle up to 24 channels, With its multi-screen user interface, Integrator RD can the typical system does not exceed 6-10 channels due to easily accommodate up to 48 channels, hundreds of the limited number of available buttons. Users requiring Instant Call pages, and a generous number of external more channel capacity than this should consider either the alarm inputs and control outputs. Model 4118/4115B or the Integrator RD workstation. Integrator RD also supports multiple languages including English, French, Spanish, Chinese and Arabic. Screens may be customized by the agency for a variety of STC’s may be operated individually, or in a redundant tactical situations and later recalled with a single mouse configuration with one operating in “hot standby”. In the click. Thus, only necessary channels are present on the event that the primary card fails, the hot standby unit screen even when dispatch requirements change from assumes control without interruption. The STC features hour to hour. ports for remote diagnostics via a modem, a diagnostic Control actions are accomplished with simple “point printer output, an external time reference, and radio system and click” mouse operations or, when appropriately management output to an external PC executing the Radio configured for touchscreen operation, by touching an icon System Management software. Up to 4MB history of card on the screen. configuration reports, system changes, and errors are stored on the STC for Zetron Service Assistance. Integrator RD allows several types of information (e.g. ANI calls and alarms) to be presented to the operator as The Console Interface Card provides the interface circuitry a descriptive name or phrase rather than an ID number. to connect the CCU to one dispatch console position Pages can be initiated by direct entry of a “cap code” or (desktop, rack, or video). with an Instant Call “button”. Instant Call pages of a given The Dual Channel T/R Control Card provides a two- type may be grouped into logical “folders” to simplify and channel interface capability for base stations, control speed operator access. stations, repeaters, “POTS” telephone lines, PAs, or With the optional User Logon feature users may use the intercoms. Text Intercom to send messages between workstations. Selected dual channel cards can optionally be configured Also administrators can give advanced feature with “Channel Check”, an integrated four minute per permissions to supervisors. channel instant recall recorder. For additional detail, please contact Zetron for a copy of Each Auxiliary Input/Output Card provides relay outputs the Integrator RD specification sheet. and discrete inputs for control/monitoring of external devices. Typical applications include room light control, COMMON CONTROL UNITS remote door opening, intruder alarms, intercom signaling, and voter inputs. The card also contains an IRIG-B decoder The Common Control Unit, or to support an interface with external time references using CCU, is the central “switch” that protocol. that routes audio and control signals between the dispatch The Patch Card is mandatory for applications requiring operating positions and cross-channel patch capability. Both radio-to-radio and radio- external communications to-telephone patches are supported. The Patch Card may devices such as radios be configured for 3 levels of patch paths; 8, 16, or 24. and telephone lines. The The optional VoIP Console Gateway allows any Integrator modular architecture of the RD console position to be remoted from the CCU via an Model 4020 Series 4000 CCU allows a agency’s LAN/WAN. This gives great flexibility in placement system to be configured of dispatch positions anywhere the LAN/WAN is available. to economically meet the user’s current needs while providing a cost-effective upgrade path for future expansion. Two sizes of common controllers are available. The Model 4020 provides a single card cage solution for applications requiring up to 20 channels. For larger applications, the Model 4048 accommodates up to 48 channels and 16 operating positions. Both employ the same architecture and a common set of circuit cards. Each can be configured for “no single point of failure” with dual system busses, dual power supplies, and dual controllers. Standard features include a dial-up diagnostic port for remote monitoring, provisions for connection of an external time reference, and dual voltage (12 VDC and 120/240 VAC) operation with the Model 4048 power supply. An optional Radio System Management software package allows users to collect usage statistics on a “by channel” and “by position” basis. Circuit card options to populate the Model 4020 and 4048 CCU include: System Traffic Controller, Console Interface, Dual Channel T/R Control, Auxiliary I/O, and Patch. Model 4048 The System Traffic Controller, or STC, performs Shown mounted in optional cabinet. the central control function for all cards in the CCU. Contact Zetron for cabinet options and pricing. PROGRAMMING OF CONSOLES Dispatch consoles may be separated from the Common Control Unit by any distance. Short distances allow direct One of the unique features of the Series 4000 system wiring via 5-pair cable, while longer distances require the is that it is fully field programmable with the Console use of modems. When modems are used over leased Programming System for Windows® (CPSW) or Radio lines, only 5-pairs of audio grade lines are required. When Dispatch Programming Software (RDPS), and a Windows® used over microwave, only three full-duplex channels are 2000, Windows® XP, or Windows® Vista PC. CPSW and required. RDPS not only allow channels to be configured for various types of base stations, but they also allow any button Channel configuration is performed by CPS/RDPS, jumpers to be assigned any available function. This eliminates and switches. Each channel may be configured for 2-wire, costly upgrades while allowing the system manager to 4-wire or 6-wire (E&M), full-duplex or simplex, high or low reconfigure the buttons (or icons) at any time in order to impedance. Channel test points and level adjustments accommodate new operating procedures or radio system are accessible without the need for an extender card. All changes. Key top labels are removable and do not require channel status LEDs on the cards are visible from the front engraving, allowing the keys to be relabeled as easily of the Common Control Unit. as they are programmed. Standard key top legends are Each card in the Common Control Unit performs supplied by Zetron while custom legends may be created continuous self-diagnostics. If a serial RS-232 printer in the field using transparent key tops. is connected to the system, the diagnostics can be automatically recorded. The supervisor’s console is notified in the event of a problem. The distributed microprocessor architecture of the Series 4000 is tolerant to component failure and can operate despite the loss of a channel or console. LED indicators identify which card may be causing a problem. A card or an entire console may be removed or replaced while the system is in operation. The service manual contains full schematics, parts IDs and parts lists. Factory service, spare boards, and spare parts kits are available. Available for-fee services include factory or on-site training, on-site commissioning, and after-hours service technician support.
ACCESSORY COMPONENTS Radio Dispatch Programming Software (RDPS) for the Integrator RD workstation. Microphone/Headset Options A wide range of Consoles are shipped from the factory programmed microphone and and labeled to customer specifications. Changing the headset options are function of a key is simply a matter of using the cursor available. Each type is to select a new function from a menu-style list on the compatible with the computer screen. When all selections are made, the new desktop, rackmount configuration is saved on the diskette and printed out for or video consoles. a paper copy. The console to be changed doesn’t have Options include to be taken out of service until all programming changes console-mounted have been completed and saved on diskette. When ready, gooseneck stored configurations are downloaded to consoles in a microphone, desktop microphone with PTT bar, matter of seconds. Configurations can also be uploaded headset jack with volume control, secondary training from a console to a PC for storage or modification. headset jack, and PTT handset with cradle. Any console INSTALLATION AND MAINTENANCE may be equipped with two of the options; one gooseneck or desk microphone, and one headset or handset. The Series 4000 is easy to install because of its “Smart” audio switching always ensures that the proper “skinny wire” design. The Common Control Unit is microphone is activated. Plugging a headset into its jack or typically installed in an equipment room near radio lifting the handset from its cradle automatically switches and telephone line terminations where the bulk of the the select audio from the console speaker to the earpiece. wiring is performed. Only 5-pairs of wires must be run The footswitch option allows hands-free transmit and from the equipment room to each console. This not monitor operation. only simplifies cable routing but reduces cable costs. Connections between the Common Control Unit and the radio/telephone terminations are via 25-pair cables and punchdown blocks. Standard or lightning-protected punchdown blocks are available. Modems Automatic Number Identification (ANI) An external modem pair is used Field units equipped with ANI encoders may be identified to remotely locate a dispatch at the console whenever they transmit, providing instant console up to a mile from its identification of the calling party. ANIs may be stored Common Control Unit when the and queued so that multiple ANIs may be reviewed in distance between them exceeds the order in which they were received. The rackmount 2000 feet. The modem provides console operates like the desktop with its single display. amplification of audio signals and conversion of data The Integrator RD workstation displays the ANI, or its signals to in-band audio signals. alphanumeric alias, in each channel’s display area. ANI formats supported include DTMF, 5/6 tone, GE-Star and Telephone Radio Headset Interface MDC-1200. The Telephone/Radio Headset Interface allows the operator to use a Tone Remote Adapter common headset for both telephone Zetron’s Model 250 Tone Remote and dispatch console. Under normal circumstances, the Adapter adapts to most EIA- audio from the console’s select channel is presented in standard base station radios so the operator’s headset. Upon activation of “XMIT”, the they can be controlled by a dispatch console operator. operator’s voice is directed to the selected channel of the Multiple channel selection for up to 15 frequencies, up to console. When the telephone instrument is taken off-hook six control outputs, and monitor and transmit (PTT), make to answer a call, select channel audio reverts back to the the Model 250 a powerful unit. console’s select speaker, and telephone audio is presented 12 preset configurations of channel combinations, control in the operator’s headset. The operator may then carry on outputs, and monitor functions make the Model 250 easy a full-duplex telephone conversation using the headset. to use. While off-hook, radio dispatch is muted to the phone caller. Requires “off-hook” contact closure from telephone for Door Intercom Interface automatic switching. The Door Intercom Interface allows intercom station call CAD Encoder Port and audio signals to be monitored and controlled via the operator consoles. The press of a station’s call button For operator positions equipped with rackmount or provides audible and visual indicators to the operator. The desktop consoles, a paging encoder provides a Computer operator may select one of up to 12 stations to monitor Aided Dispatch (CAD) port which allows the CAD system or speak through. Compatible with common 3- or 4-wire to select the proper tone sequences and channels, intercom modules such as Aiphone LE-D. (Not suitable for eliminating much of the potential for error. CAD interface “multi-master” intercom systems.) is an optional feature on the Integrator RD workstation. VoIP Console Gateway Instant Recall Recorders The optional VoIP Console Gateway allows any Integrator Zetron’s Instant Recall Recorders RD console position to be remoted from the CCU via are used to temporarily record and an agency’s LAN/WAN. This gives great flexibility in replay radio and/or telephone traffic placement of dispatch positions anywhere the LAN/WAN that passes through a dispatch is available. position. They allow the operator to replay for verification his or her recent traffic without having to leave the position to search for the recording at the logging recorder. The Integrator IRR Instant Recall Recorder is a PC-based voice recording application which adds Intelligent Integrated Workstation (IIWS) call recording/playback capability to 9-1-1 telephone and/ or radio dispatch systems. Zetron also offers the Model 3022 for rackmount console positions, which can be configured to meet specific needs. SPECIFICATIONS Transmit Electrical Specifications Audio Output +10 dBm max. into 600 ohm line Channel Control Local, E&M, Tone Remote, DC* Remote, Output Impedance Transmit: 600 ohm balanced. Telephone (end-to-end), and selected Idle: 600 or 3500 ohms trunking radio protocols Distortion <2% at full output. Hum, Cross-Talk all DC Control Programmable from + 15 mA in 2.5 50 dB at full output increments, plus + 5.5, 6.0, 11, and 15.5 Microphone Input -65 dBm for full output mA. Operable up to 8K ohm loop resistance. Aux. Mic Input -20 dBm for full output Accuracy + 0.25 mA Page/Spare Input -15 dBm, not compressed Tone Control 15 standard tones supported, Frequency Response -3 dB to +1 dB from 250-3400 Hz programmable (in 100 Hz increments) to except guard tone notch 650-2050Hz. Compression Input level increase of 30 dB above knee of High Level Guard Tone compression causes <3 dB output increase duration 100-790 msec. Function Tone Receive Electrical Specifications duration 40 msec. Guard Tone Freq. 2175 Hz, alterable. Tone freq. accuracy Input Impedance 600 or 10K ohm (4-wire) + 0.2%; timing accuracy +1.0 600, or 3500 ohm (2-wire) Local Control PTT normally open relay contact rated 1.0 A Line Balance 66 dB at 1000 Hz at 24 VAC/DC Rx Sensitivity -30 dBm max. at knee of compression; E&M Control Tx control via PTT relay, adjustable external 48V required Frequency Response -3dB to 1 dB from 250-3400 Hz Trunking Control EDACS®, MAP27, iDEN®, P25, SNSZ®, except guard tone notch LTR ®, PassPort® Compression Input level increase of 30 dB above knee of Busy Chan. Detect Local Cross-Busy detection; Guard Tone or compression causes <3 dB output increase DC Control detection (LOTL) Distortion < 2% Time Synch IRIG-B (with Aux I/O Card) Call Light Sensitivity 20 dB below knee of RS-232 (1200, 2400, 9600, 19.2 Baud) compression (vox operation) Radio Management Port RS-232 (1200, 2400, 9600, 19.2 Baud) Audio Outputs 5 watts into 4 ohms Logger Port RS-232 (1200, 2400, 9600, 19.2 Baud) Mute Programmable from 0 to -50 dB “All-mute” Modem Port RS-232 (1200, 2400, 9600, 19.2 Baud) time programmable Recorder Outputs 1 per channel (Tx/Rx audio summation), Physical Specifications (H x W x D) plus 1 output per console. 0 dBm level, Model 4018 9 x 18 x 14 inches 600 ohm single ended Model 4118 5.25 x 19 x 4.5 inches Power Input (M4048) 85-132 VAC Model 4115 5.25 x 19 x 2.25 inches 170-264 VAC Integrator RD Workstation 47-63 Hz Video Display Varies with selected monitor 12-13.8 VDC M4217 Audio Panel 5.25 x 19 x 4.5 inches 280 Watts maximum M4219 Audio Interface 1.75 x 19 x 7 inches Power Input (M4020) 95-240 VAC 2 amps Model 4048 50-60 Hz Chan. Card Cage 15.75 x 19 x 9.75 inches 150 Watts maximum Cons. Card Cage 17.5 x 19 x 9.75 inches Approvals FCC part 15, FCC part 68 Power Supply 3.5 x 19 x 9.75 inches Model 4020 22.75 x 19 x 10 inches Dust/Liquid Ingress NEMA 1, IEC 60529 IP 30 Contact Zetron for a copy of a detailed Configuration Guide. Operating Temp 0 to 45 degrees Celsius * Model 4020 modular power supply supports up to 5 simultaneously keyed DC remote channels when Model 4020 Other Electrical Specifications card cage is fully populated. For greater capacity, select Model Capacity (M4048) 2-48 Channels 4048 power supply, or the Model 4020 dual power supply. 1-16 Operating Positions (15 w/ Patch Card) For more information on this and other Zetron products, contact: Capacity (M4020) 2-20 Channels 1-6 Operating Positions Console Interface 3 audio pairs (Select, Unselect, MIC) and 2 data (RS-422 @ 9600 Baud) Channel Audio 2-wire simplex/half-duplex, or 4-wire half/full-duplex
ZETRON USA ZETRON UK ZETRON AUSTRALASIA PO Box 97004 27-29 Campbell Court PO Box 3045 Redmond, WA Bramley TADLEY Stafford Mail Centre Basingstoke RG26 5EG 98073-9704 Stafford QLD 4053 © 2008 Zetron, Inc. All rights USA UK Australia reserved. Zetron is a registered trademark of Zetron, Inc. TEL 425 820 6363 TEL +44 (0)1256 880663 TEL +61 7 3856 4888 FAX 425 820 7031 FAX +44 (0)1256 880491 FAX +61 7 3356 6877 All trademarks are properties of their respective owners. [email protected] [email protected] [email protected]
WWW.ZETRON.COM See Zetron price list for option pricing. Specifications subject to change without notice 005-0150W May 2008
SHELBY COUNTY ZETRON SERIES 3300 VoIP 911 TELEPHONE SYSTEMS DESCRIPTION
The ZETRON Series 3300 VoIP E9-1-1 Telephone system is designed to help Shelby County respond to emergencies quickly and accurately, resolve critical compatibility issues and comply with industry and Federal standards including Wireless Phase 1 and 2.
Shelby County’s system includes a 24-Call IP system with 24 Analog input ports, a 911 Server with PC, (6) E911 trunks, 10 Caller ID Lines, Integrator Reporting System, SQL 008 Server, and recommended spares.
The 3300 is CRT based and includes two individual Integrator dispatch positions with Windows XP Pro, Dell Workstations and Client Software. Each position is equipped with IRR (instant recall), backup 3240 – 40 Key Desktop phones and TDD.
Shelby County’s system provides (6) E911 trunks and (10) Caller ID lines. The 3300 is designed for any combination of administrative, ringdown, emergency lines and E911 trunks up to a total of 100 providing the opportunity for future growth. It is Phase II ready and fully NENA compliant.
The Key Service Unit (KSU) will be located in your equipment room and includes: (1) IP Call System, (1) Station Card Shelf, (3) Station Cards (1 Spare), (3) AC Interrupter Cards (1 spare), (7) E911 Trunk card (1 spare), (11) Caller ID Line Cards, (4) Station Ringdown Line Cards, (3) AC Talk Supplies (1 spare to meet NENA standards), (3) Workstation Power Supplies (1 Spare), (1) RS-232 Serial Port Card with 2 ports, (1) 9-1-1 Server License, (3) CTI cables, (1) EX E9-1-1 Controller with ALI, (2) Line Card Shelves, (2) Rack Distribution Cables, (1) 8-Port Ethernet Hub, (3) CO/PBX cables, Punchdown Blocks, (1) 1200 Baud ALI database modem, and a Call Detail Record Printer. A 72” equipment rack is being provided to accommodate the equipment. In the event of failure built-in alarms notify PSAP personnel, and using an IP VPN secure connection, the system can be supported remotely.
The distributed architecture of the system and high “mean time between failures” design ensures high availability and minimal impact in the event of failure. Spares have been provided to allow hot-swappable component replacement while the system is operating.
CAD and GIS interfaces are standard on the 3300. The CAD port can be used by both CAD and Mapped ALI systems to automatically populate address fields and display map locations.
RACOM will configure the system prior to installation in cooperation with county personnel. All dispatcher training will be provided per a mutually agreed upon schedule.
An optional hardware/software extended warranty has been quoted for one year and five years.
Cindy Sorum Proposal Prepared for: SHELBY COUNTY EMERGENCY MGMT. 5700 Culwells Rd. Address 612 COURT STREET Lincoln, NE 68516 City HARLAN 402-489-9911 - Phone State & Zip Code IA 51537 County SHELBY COUNTY EMERGENCY MGMT. 402-483-0365 - Fax Phone/FAX 712-755-5160 [email protected] Contact Name BOB SEIVERT Contact E-mail [email protected]
ZETRON SERIES 3300 911 TELEPHONE SYSTEM ITEM QTY PART NO. DESCRIPTION UNIT EXTENDED 1 1 OPERATOR POSITION 9-1-1 OPERATOR, 2-POSITION BUNDLE INCLUDES: (2) INTEGRATOR 911 CLIENTS, (2) INTEGRATOR$ 141,472.00 $ 141,472.00 BUNDLES IRR, (1) 911 SERVER LICENSE, (1) STATION CARD SHELF, (2) STATION CARDS, (3) CTI CABLES,$ - $ - (1) EX E911 CONTROLLER WITH ALI, (2) LINE CARD SHELVES, (2) E911 TRUNK CARDS, (2) RACK$ - $ - DISTRIBUTION CABLES, SHELF BLANKS, AND MANUALS $ - $ - $ $ 2 1 VOIP CALL SYSTEM IP CALL SYSTEM, 24 CALL (HIGH AVAILABILITY) $ - $ - BUNDLES $ - $ - $ $ 3 1 VOIP CALL OPTIONS (2) IP CALL GATEWAY, FXO, 12 PORT $ - $ - (2) RACK ENCLOSURE $ - $ - $ $ 4 1 INTEGRATOR SUITE INTEGRATOR REPORTING SYSTEM $ - $ - SOFTWARE $ - $ - $ $ 5 2 DESKTOP 911 3240D 40 KEY DESKTOP $ - $ - CONSOLES $ - $ - $ $ 6 2 CONSOLE OPTIONS TDD OPTION $ - $ - $ $ 7 1 STATION CARD PRIMARY STATION CARD (SPARE) $ - $ - SHELVES & STATION STATION CARD SLOT COVER $ - $ - CARDS & VOIP $ - $ - $ $ 8 1 ALI CONTROLLER (2) 1200 BAUD ALI DATABASE MODEM $ - $ - OPTIONS (1) CDR PRINTER $ - $ - (1) CDR PRINTER "Y" CABLE $ - $ - $ $ 9 1 LINE CARD SHELVES (3) AC INTERRUPTER CARD (1 SPARE) $ - $ - AND LINE CARDS (5) S3300 ADVANCE E911 TRUNK CARD (1 SPARE) $ - $ - (11) S3300 ADVANCED CALLER ID LINE CARDS (1 SPARE) $ - $ - (4) STATION RINGDOWN LINE CARD (1 SPARE) $ - $ - $ $ 10 3 POWER SUPPLIES (3) AC SIG/LAMP/RING SUPPLY (1 SPARE) $ - $ - (3) AC TALK SUPPLY, -48 VDC (1 SPARE) $ - $ - $ $ 11 1 CABLING AND (3) CO/PBX CABLE $ - $ - INSTALLATION (3) CO/PBX PUNCH BLOCK $ - $ - Total Equipment Price$ 141,472.00 Installation$ - Terms of Purchase: Net 30 Subtotal $ 141,472.00 Tax Rate Taxes$ - Payment with Order: $28,000 Shipping$ 250.00 Approximate Delivery Date: 6-8 Weeks Total $ 141,722.00 If applicable, product warranty: One year parts Proposal is valid for 60 days from the date listed below
Shelby County 3300 Quote 01 07 10.xls - Printed 1/7/2010 System Description: Series 3300 VoIp telephone System including 24-Call IP system with 24 analog input ports, 2 CTI positions with PC's and 3240D backup position, customer provided 911 Server, (6) 911 Trunks, 10 Caller ID Lines, and recommended spares.
Proposal Presented By: Cindy Sorum Date: 01 07 10
Proposal Accepted By: Date:
Page 2
ITEM QTY Part No. DESCRIPTION UNIT EXTENDED 1 INSTALL E911 PROGRAMMING $ - $ - $ - $ - 12 2 COMPUTERS WINDOWS VISTA PC, DELL OPTIPLEX $ - $ - ARMS $ - $ - $ - $ - 13 1 COMPUTER PC (2) 2-PORT (DUAL DVI OR VGA) PCI EXPRESS VIDEO CARD, 128, MB $ - $ - CARDS (1) RS-232 SERIAL PORT CARD, 2-PORT $ - $ - $ - $ - 14 1 COMPUTER NETWORK 8-PORT ETHERNET HUB $ - $ - $ - $ - 15 2 EQUIPMENT RACKS 77" EQUIPMENT RACKS WITH SHELVES $ - $ - $ - $ - 16 1 LABOR/TRAINING ENGINEERING, SET-UP, SYSTEM CONFIGURATION, PROGRAMMING AND TRAINING$ - $ - $ - $ - 17 1 OPTIONAL (1) INTERGRATOR REPORTING SYSTEM - $5,450 $ - $ - INTEGRATOR (1) MICROSOFT SQL 2008 SERVER W/10 CALS - $5,350 $ - $ - SUITE SOFTWARE $ - $ - $ - $ - 18 1 OPTIONAL ONE YEAR WARRANTY - HARDWARE, SOFTWARE, AND LABOR - $6,899.00 $ - $ - FIVE YEAR WARRANTY - HARDWARE, SOFTWARE AND LABOR - $26,398.00 $ - $ - $ - $ - 19 2 OPTIONAL 3 OVER 3 DESKTOP MONITOR MOUNTS - $1050.00 EACH X 2 = $2010.00 $ - $ - CHIEF MONITOR $ - $ - MOUNTS $ - $ - $ - $ - $ - $ - $ - $ -
Shelby County 3300 Quote 01 07 10.xls - Printed 1/7/2010 Series 3300 VOIP call-taking system
Series 3300 Integrator 9-1-1
Model 3240
Series 3300 Controller Model 3299 SIP Phone
FEATURES ● 9-1-1 call handling immune from PC or IP call-processing delay. At the position, the call-taker network failures can answer the call with a mouse, keyboard, touch screen, or 9-1-1 telephone set, which is always present ● VoIP intelligent call overflow of voice and data to maintain the call in case of PC failure. With the to alternate Series 3300 equipped PSAPs Series 3300, 9-1-1 calls can be transferred manually or ● Next generation 9-1-1 ready automatically to a PSAP’s alternate emergency call- ● Automatic Phase II Wireless ALI Repeat on primary taking system over IP, avoiding the Central Office. or alternate Series 3300 system ● Full IP Remote call-taker positions from central SYSTEM FEATURES Series 3300 Built on Proven Technology ● Economic addition of administrative IP phones The Series 3300 integrates proven technology to deliver ● Standards-based using Session Initiation Protocol essential solutions for today’s IP capable PSAP. By using ● Extensive feature set of well established Integrator proven technology, such as Integrator 9-1-1, the Series 9-1-1 Computer Telephony Integration (CTI) 3300 is a reliable, feature-rich product that sacrifices nothing while delivering IP’s benefits. ● Dynamic Line Buttons with descriptive labels ● Fault tolerant, high availability architecture 9-1-1 Call Processing ● Convert Series 3200 to IP capable Series 3300 The architecture of the Series 3300 isolates the 9-1-1 without a forklift replacement call so it is unaffected by IP security attacks or network congestion. This means that if the Server goes down, Introduction the call-taker can still answer 9-1-1 trunk calls. The Series 3300 rings at the call-taker position without the Zetron’s VoIP emergency call-taking system is a extra call conversion and processing time found with standards-based solution that offers the advantages of other architectures that convert CAMA to IP on each IP without risking reliability or performance. It is built and every call. upon an IP core and uses the widely accepted Session Initiation Protocol (SIP). Yet, the extensive set of High Reliability features available in Zetron’s Integrator 9-1-1 Computer The distributed architecture and high MTBF design of Telephony Integration software are not sacrificed. the system ensures not only high availability, but also The Series 3300 accepts standard 9-1-1 trunks, 7-digit minimal impact in the event of a failure. The Series emergency lines, caller ID lines, wireless Phase 1 or 2, 3300 has built-in redundancy which ensures compliance or, if the PSAP has service from a VoIP provider, VoIP to NENA reliability standards with two levels of power calls. After the call is received, 9-1-1 calls are routed redundancy available. When properly configured a to ring at the call-taker position without any additional single failure typically impacts only one console or trunk, but never more than half the system. Making IP FEATURES extensive use of optical and physical isolation maximizes the probability of withstanding lightning strikes so 9-1-1 Network of PSAPs calls can continue to be processed. By using a standard means of connection, the Series 3300 Diagnostics and Maintenance can send 9-1-1 or caller ID calls between PSAPs over IP without going back through the Central Office. This creates In the event of a failure, built-in diagnostics generate the opportunity for PSAPs to build call-taker back-up in alarms to PSAP personnel, and if optionally equipped, to support of large incidents or for a 24/7 PSAP to relieve a remote repair technicians. Using an IP VPN or secure dial- part-time PSAP after business hours. up connections, the system can be supported remotely. This includes ALI controller updates and full remote Intelligent Call Overflow diagnostics. The system design allows components In addition to manual transfers and night service, the replacement while the system is operating. Thus power Series 3300 has intelligent call overflow over IP. Series supplies, cards and consoles can be replaced with minimal 3300-equipped PSAPs with intelligent call overflow disruption to service. between them exchange data messages that indicate their Future Ready status and readiness to accept an IP transfer. It senses when all call-takers are busy then searches that call-takers The Series 3300 is a reliable emergency call-taking are available in the designated back-up PSAPs before solution that has all of the IP capabilities necessary transferring the call. for today. It can grow and expand to meet future requirements as the needs and technology constantly Call Data Delivered with the Call evolve. Since the Series 3300 is designed, developed and When manual transfers, night service, or intelligent call maintained by Zetron’s 9-1-1 experts, it will easily adapt overflow occur, it is important that the receiving PSAP to meet or exceed technology needs of tomorrow and call-taker know where the call came from, accurate ANI/ beyond. ALI, and the call priority. The Series 3300 provides this Conversion Path from Series 3200 information. Since the back-up PSAP may not have the same ALI provider, all ALI look-ups go back through the With the Series 3300, your current Series 3200 product PSAP initially receiving the call. can be converted to a Series 3300 if and when the need arises. And due to the use of Integrator 9-1-1 suite Dynamic Button Line Groups software, call-takers familiar with using the Series 3200 The Series 3300’s IP Call Server also includes options for can begin using the Series 3300 with minimal retraining. grouping and pooling calls, so multiple incoming lines can be represented on a single button on the Integrator 9-1-1 screen. This reduces the number of resources your call- takers must manage. Interactive Voice Response (IVR) Automatic Wireless ALI Repeat For incoming administrative calls, it is useful to have The system can be configured to automatically make a a voice prompt to help guide the caller to the proper second ALI retrieval to obtain the Phase 2 ALI information extension. Voice prompts are available and can be locally without call-taker intervention. Call-taker controls also recorded so a single line can be directed to any of several permit continuous updates for moving incidents. phones. Pre-Answer ALI VoIP Remote Positions With Pre-Answer ANI/ALI, the ANI and ALI of all incoming Sometimes it is desirable for small back-up sites with one calls are represented on each individual line appearance. or two call-takers to be economically provisioned without This allows the user to see call information before they the need to install the CPE back-room equipment at each answer. On-screen information also shows which console location. The Series 3300’s VoIP Remote Position option is connected to a line. The ANI/ALI can be displayed on enables this over the IP network. All that’s required at the those calls answered by others. When using Zetron’s remote position is a small interface unit and Integrator optional Integrator Map, this feature allows the call-taker 9-1-1 CTI. This could result in circuit cost savings. to view and handle calls from the map screen before they Integrator ALI Call-Taking Extension are answered. Zetron’s Integrator ALI call-taking extension (ACE IP) Busy Announcement is a software-based telephone that can be run on any With the optional Busy Announcement feature, whenever typical office computer or laptop that shares a network all call-takers are busy, 9-1-1 callers can receive a pre- connection with the Series 3300 E9-1-1 Call taking recorded voice announcement in place of ringing. System. The Integrator ACE IP is capable of handling Integrated TTY 9-1-1 calls in a busy-overflow environment or calls that are manually transferred directly to it. For incoming calls, The TDD/TTY feature is fully ADA compliant and includes ACE IP provides the user with a text display of the ALI HCO/VCO, Baudot and ASCII compatibility, as well as information that was provided to the 3300 system. The compliance with Wireless TTY standards. Buttons on Integrator ACE IP soft phone provides a cost-effective the console permit quick sending of preprogrammed backup position for periods of unusually high traffic, messages, or by plugging in the optional keyboard, free- making it ideal for Emergency Operation Centers (EOCs) form text may be sent. located in the same building. Integrated Instant Recall Recorder SIP Administrative Phones An integrated Instant Recall Recorder (IRR) option is The Series 3300 offers the opportunity for PSAPs to available for consoles to provide limited conversation install SIP telephones for administrative personnel easily recording playback via the console’s handset or headset. and economically. The system can support any standard Integrated Phone Book SIP based phone set. The Series 3300 can also tie into Within the CTI, a phone book is provided that displays other PBX systems that serve other agencies to create an names and numbers that can be grouped in lists. Any integrated system. entry may be assigned as a single-button auto dial. The list may be searched alphabetically using up/down buttons or OTHER FEATURES by using the optional keyboard to perform name matches. System Capacity CAD & GIS Interface The system can expand up to 90 call-taker positions. The A standard feature of the Series 3300 is a NENA compliant number of incoming lines or trunks is dependent upon Computer Aided Dispatch (CAD) port which delivers ALI whether the Dynamic Button Line Groups are configured. data upon call answer. This port can be used by both CAD If that feature is not used, the combination of lines and and GIS (Mapped ALI) systems to automatically populate trunks can go up to 90 with an additional 10 lines for address fields and to display map locations. ringdown circuits. If the Dynamic Button Line Group feature is used the total number of lines can grow beyond Priority Answer this limit. Each type of line in the system can be assigned high, medium or low answer priority. By pressing the Answer FCC Phase 1 & 2 button, the highest priority, longest ringing line is always The system can handle Phase 1 and 2 wireless calls. answered first. With its Enhanced MF capability it is able to accept all call delivery methods including CAS, NCAS and HCAS. Distinctive Ring SIZE Up to 12 different ringing sounds can be assigned to each 24 Call, IP Call System w/ 2 Gateways: 14 U (24.5”) H, 19” W, 16” D, 65 lbs group of lines so that call-takers can tell what type of line they will be answering without looking at the phones. Additional IP Call System enclosures fully loaded: 3 U (5.25”) H, 19” W, 16” D, 18 lbs Call-Taker Logon 5 U (8.75”) H, 19” W, 16” D, 36 lbs Using Zetron Account Manager (ZAM) administrators 8 U (15.75”) H, 19” W, 16” D, 65 lbs are able to a assign profiles and permissions to call- Station Card Shelf: takers. Thus, when a call-taker logs on, their preferences 10 U (17.5”) H, 19” W, 12” D, 35 lbs (max) and permissions follow them. This includes call group Line Card Shelf: membership, personal dial list, supervisory features, and 3 U (5.25”) H, 19” W, 10” D, 15 lbs (max) screen color/layout. AC Power Supply: 5 U (7.5”) H, 19” W, 6” D, 14 lbs SPECIFICATIONS AC N+1 Power Supply: 3 U (5.25”) H (add 1 U above and below for air flow), 19” W, 16.5” D IP DISTRIBUTION INTERFACES POWER RJ-45 female, 100BaseTX Ethernet, w/ optional power over Ethernet 24 Call, IP Call System w/ 2 Gateways: (802.3af), SIP v2, G711, IAX2 100-240 VAC (50/60Hz), 275W dissipation ADMINISTRATIVE AND EMERGENCY LINE INTERFACE Line & Station Shelves: 110W dissipation per shelf (max.) ● Analog RJ-21, FXO 2-wire loopstart, ring and tone detection, disconnect AC: supervision, Caller ID detection 100-134 VAC, 57 to 63 Hz, (distributed or N+1 PSU configuration available) ● Digital T1 RJ-48c, CAS Robbed bit loop and ground start, E&M, immediate, wink, DC: double wink -43.5 to 56.5 VDC ● Digital PRI Stations: RJ-48c, ISDN DSS-1, NI-2, Q.SIG 36 W each (computers, monitors, and accessories not included) ● E9-1-1 Trunk COMPLIANCE RJ-21, 2-wire, reverse battery, 900 ohm, accepting MF (R1) signaling, ● Direct CO, Tandem CO, Enhanced MF FCC CFR 47 Parts 15 and 68, Docket 6787 ● EIA/TIA RS-310, 574, TIA/EIA-825 ALI INTERFACE ● BellCore TA-NPL-00912, TR-NWT-000030 & 001188, DB-25 male wired at DTE up to 19200 baud TR-TSY-000064 & 000350 RS232 (external modem) ● NENA 04-001, 04-002, 03-002, 02-010, 08-001, CAD INTERFACE 58-001, 08-501 DB-25 female wired as DCE, RS-232, 1200 to 9600 baud ● ANSI/TIA/EIA 574, 825
MASTER CLOCK INTERFACE NETWORK REQUIREMENTS DB-9 male wired as DTE, RS-232, 1200 to 9600 baud Voice Traffic 150 Kbps between Series 3300 Bandwidth per 250 Kpbs to VoIP Remote Station CDR PRINTER INTERFACE duplex conversation DB-9 female wired as DCE, RS-232 9600 baud, abbreviated ASCII text Voice Traffic Payload < 40% of total available bandwidth to Bandwidth Ratio TDD/TTY COMMUNICATIONS 5-bit Baudot at 45.45 baud, 7-bit ASCII at 300 baud Packet Loss < 1.0% (< 0.1% mission critical) Packet Delay < 80ms (< 40 ms mission critical) ENVIRONMENTAL Packet Jitter < 40 ms (< 20 ms mission critical) Operating Temp 0 to 50C (32 to 122F) (5 to 37C for power supply) ● Operating Humidity up to 80%, non-condensing
ZETRON USA ZETRON UK ZETRON AUSTRALASIA PO Box 97004 27-29 Campbell Court PO Box 3045 Redmond, WA Bramley TADLEY Stafford Mail Centre 98073-9704 Basingstoke RG26 5EG Stafford QLD 4053 USA UK Australia © 2009 Zetron, Inc. All rights reserved. Zetron is a registered TEL 425 820 6363 TEL +44 (0)1256 880663 TEL +61 7 3856 4888 trademark of Zetron, Inc. FAX 425 820 7031 FAX +44 (0)1256 880491 FAX +61 7 3356 6877 All trademarks are properties of their respective owners. [email protected] [email protected] [email protected]
WWW.ZETRON.COM See Zetron price list for option pricing. Specifications subject to change without notice 005-1359G September 2009 Cindy Sorum Proposal Prepared for: SHELBY COUNTY EMERGENCY MGMT. 5700 Culwells Rd. Address 612 COURT STREET Lincoln, NE 68516 City HARLAN 402-489-9911 - Phone State & Zip Code IA 51537 County SHELBY COUNTY EMERGENCY MGMT. 402-483-0365 - Fax Phone/FAX 712-755-5160 [email protected] Contact Name BOB SEIVERT Contact E-mail [email protected]
Norstar Administrative Phone System ITEM QTY PART NO. DESCRIPTION UNIT EXTENDED 1 1 NORSTAR INCLUDES: (1) NORSTAR MICS MODULAR INTEGRATED COMMUNICATION SYSTEM 0 X 32$ 23,927.00 $ 23,927.00 SYSTEM STATIONS EXPANDABLE TO 250 TOTAL PORTS, (1) NORSTAR EXPANSION MODULE, $ - $ - (1) NORSTAR MICS MODULAR CARTRIDGE (PROVIDES CONNECTION FOR UP TO 2 FIBER $ - $ - TRUNK OR STATION MODULES, (3) NORSTAR CALLER ID TRUNK CARTRIDGES, (1) NORSTAR$ - $ - CALL PILOT 150 VOICEMAIL MESSAGING SYSTEM WITH 4 PORTS/8CHANNELS, 32 MAILBOXES,$ - $ - CUSTOM CALL ROUTING, IP-ENABLED WITH 100 ETHERNET PORTS, (29) NORSTAR DIGITAL$ - $ - PHONE SETS WITH SPEAKER PHONE, 24-PROGRAMMABLE MEMORY BUTTONS, INTEGRATED$ - $ - BUSY LAMP FIELD, 2-LINE, 16 CHARACTER-PER-LINE LCD WITH 3 SOFTKEYS, TILT DISPLAY WITH $ - $ - INTEGRATED VISUAL RING/MESSAGE WAITING INDICATOR, MENU DRIVEN DISPLAY, SYSTEM$ - $ - PROGRAMMING, SET-UP, TRAINING AND INSTALLATION $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - Total Equipment Price$ 23,927.00 Terms of Purchase: Net 30 Installation$ - Subtotal $ 23,927.00 Payment with Order: $4700 Tax Rate Taxes$ - Approximate Delivery Date: 1 month Shipping$ 35.00 -If applicable, product warranty: Total $ 23,962.00 -If applicable, network access fees: Proposal is valid for 60 days from the date listed below
System Description:
Proposal Presented By: Cindy Sorum Date: 10 15 09
Proposal Accepted By: Date:
Shelby County Norstar Admin Phone System Quote 10 15 09 - Printed 10/15/2009 Portfolio Overview
Nortel Networks Norstar Integrated Communications Systems Portfolio
Flexible, reliable, and scalable – Delivering powerful solutions to small and medium businesses Norstar’s powerful solutions support your business goals so that you can focus on your business, not your network.
Whether you are a standalone business office, multi-site business, franchise, branch office, or department within a larger organization, your business relies on your phone system to perform every time you pick up the receiver or press a key. You need a simple-to-use telephone system with practical, scalable features that does not require costly end-user training to be effective. You need a cost- effective system to fit your budget today, with the capacity and scalable applications to secure that competitive edge as you grow. Norstar* Integrated Communications Systems offer end-to-end solutions to small and medium-sized businesses and branch offices to enable you to focus on your bottom line—your business.
2 Practical solutions meet your needs today and give your business room to grow.
Norstar Integrated Communications Systems: Providing superior reliability for your communications Every Norstar solution begins with an Integrated Communications System (ICS). This fully digital platform brings together all your communications—voice mail, e-mail, computer, and telephone— right at your desktop. The communication needs and size of your business will help determine the best system for your Figure 1: company. Whatever system you choose, Norstar Integrated Communications Systems every Norstar ICS offers these important offer practical solutions. advantages: Models from left to right are the Norstar Compact ICS, • to the desktop lets Norstar 3x8, and the Norstar High bandwidth Modular ICS. you use applications like ISDN and Computer Telephony Integration •Supports all Business Series Terminals (CTI) without changing your existing Norstar 3x8 Integrated Communications wiring. System (ICS) •Supports Norstar VoIP Gateway for Simple, yet sophisticated, this unit was IP Telephony • enables trunk-side IP VoIP Telephony designed specifically for small businesses connectivity for Norstar by providing and supports: Norstar Modular Integrated multi-site companies with direct inter- Communications System (ICS) office voice and fax traffic over an •Up to 3 CO lines and 8 telephone Designed to be both flexible and scalable, IP network. extensions there is ample room to expand the soft- •Voice mail, automated attendant, and • Modular, scalable design lets you choose ware and hardware capacity of the telephone support the system that fits your needs today, Norstar Modular ICS supporting: while planning for the future. •All Business Series Terminals, including •Upto248 ports in various configurations • creates a platform for fully-featured digital functions with Digital technology •Advanced integrated applications: current and future PC-based applications. LCD and soft keys voice messaging, unified messaging, • Outstanding quality makes Norstar one Norstar Compact Integrated digital networking, and enhanced of the most durable and reliable voice Communications System (ICS) call centers solutions available, delivering one of A flexible building-block design expands •Software and system expansion the lowest failure rates in the industry. with your business easily and cost effectively: modules that let you grow as your For example, the compact ICS has a •Grows from a 4x8 to an 8x24 capacity business needs change tested mean time between failure (MTBF) rate of 100 years. •Supports voice mail, unified messag- •All Business Series Terminals ing, automated attendant, telephones, •Supports Norstar VoIP Gateway basic call center, and CTI for IP Telephony •Allows you to easily add enhancements as your business needs change
3 Intelligent business platforms Business Series Terminals: Helping to increase your business productivity
To end users, the telephones are the system. Your telephone is the most critical interface to your business productivity. Internal communica- tions, customer services, and business-to-business activities—they are your lifeline to business communications. Nortel Networks understands that the user’s perception of the telephone and the manner in which it delivers services are the benchmark by which a voice system is measured (see Figure 3). Norstar offers a wide range of user-friendly Business Series Terminals, to fit any need in your business (see Figure 2)—from the front desk to the conference room, and anywhere in between.
Simple,
Figure 2: efficient tools Four desktop Business Series Terminals come in both platinum and charcoal color options. Models from left to right drive increased are T7316E, T7100, T24, T7208, and the T7406 Cordless, which is available in charcoal. For niche applications, the audio conference unit and door phone productivity. can be added as simply as any digital terminal.
4 1 8 2 9 3 10 4 11 5 12 1 Message Waiting Indicator (MWI)/ 6 13 Visual Ringing Lamp (VRL) – All 7 14 T7100, T7208, and T7316E telephones are complete with an intelligent red LED to keep you aware of incoming messages Figure 3: with a single glance. Four unique patterns The Business Series Terminals come include: fast flash—phone is ringing, on with a long list of standard features. Integrated Busy Lamp Field/Direct The model shown is Business Series 11 another call, or you’re away from your Terminal T7316E. Station Select (BLF/DSS) – The desk; slow flash—call on hold; solid T7316E provides integrated BLF/DSS pattern—message waiting; blank— 8 LCD Window – The Business Series capability for one-button access to any phone is idle. Terminals have an LCD display that combination of features, internal auto- dials, and external autodials. You can 2 Call Log – You can easily find out exactly walks you through Norstar and Business who has called while you were away from Communications Manager features step- easily customize each phone to meet the your desk. The Call Log leverages Calling by-step so you can easily transfer calls, needs of each user. For example, if you Line Identification (CLID) services to show establish conference calls, respond to meet frequently with customers in your a record of incoming call information— messages, and leverage network and appli- office, you can program a button for “Do including date and time of calls as well as cation services. The LCD display will Not Disturb” and avoid interruptions by number of repeated attempts. Also available identify the person calling before you merely pressing a button. on the T7100, T7208, T7316E, and T7406. answer if you subscribe to CLID services 12 Hold – A simple touch of a button places from your voice services provider. The callers on hold—with tones or music Soft Keys – Communications are 3 LCD display allows you easy access to further simplified by three soft keys on to assure them that they have not been advanced applications—such as Voice the T7316E that let you select the appro- disconnected. External calls on hold play Mail, Fax Messaging, and Dial-by- priate action with just one touch of a periodic reminder tones, and Exclusive Name—without the need for studying key—without the need to remember Hold—available as a simple feature code— instruction manuals. And to make cumbersome commands. prevents co-workers from inadvertently viewing even easier, the T7100, T7208, picking up your call from their sets. 4 Feature Button – Just press this button and T7316E telephones feature fully Hands-free Button – With one-touch, to quickly program or use one of the adjustable tilt LCD windows. 13 many features on the Norstar and Nortel handsfree operation, you can place or Need quick access Networks Business Communications 9 Memory Buttons – answer calls without picking up the to the numbers of your most important Manager (an integrated voice and data handset. customers? You can easily program solution) voice platforms. T7316E + T24 Central Answering frequently used numbers for one-touch 14 Position – The T24 Key Indicator Release Button – No need to lift and dialing. You can also program the memory 5 Module (KIM) is a 24-button module replace the handset to hang up after a buttons for quick access to system features that attaches directly to the T7316E; hands-free call—just press the Release or network services. The choice is yours— together they form the Business Series button. customize the phone for the way you work. Terminal (BST) Central Answering 6 Built-in Speaker – High-quality audio 10 Volume Control Bar – You can easily Position (CAP). This modular approach enables hands-free conversation, back- and quickly adjust the ringer, handset, is extremely flexible and allows for easy ground music, group listening, and headset, or speaker volume by merely configuration and expansion. Once in paging announcements. A crisp speaker tapping the volume control bar to accom- place, the BST CAP transforms the pace saves your neck and ear during long calls modate soft-spoken customers or to hear and efficiency of business by centralizing and avoids any conversation distortion. an important incoming call when you and efficiently distributing calls. Typical 7 Mute Button – You can use the Mute step away from your desk. users include contact center supervisors, button to listen without being heard. office administrators, and central answering positions.
5 Intelligent application tools Integrated applications: Building power to increase your competitive advantage
With scalable integrated applications, you and your employees can get For example, you can set up a centralized more work done in less time by managing all communications from one voice mail attendant at the main office location, and you can save money on long-distance charges by using that can forward messages and calls your own network for voice and fax messaging. You will quickly notice between the branch offices and the main the increased productivity, and your customers will notice the increased site via a shared applications server. This is responsiveness, too. completely transparent to your customers, who won’t know if they are talking with a branch office or the headquarters loca- CallPilot 100/150 Desktop Messaging CTI is changing the way business works tion. You will save money because you Deliver voice and e-mail messages to your by significantly reducing repetitive tasks will not have to purchase external systems computer screen so you can manage all your so your employees will work smarter, and your network management will be communications from one location. The while reducing 800/888 line charges by simplified. Norstar-to-Meridian 1* and CallPilot 150 messaging system delivers handling customer calls more quickly. Norstar-to-Norstar Private Networking advanced messaging applications to • Screen Pops give you instant access is available on the Norstar Modular businesses with 32 to 300 users, while the to customer information on ICS 6.1 release, as is support for CallPilot 100 addresses the messaging needs your computer before you Norstar-to-Norstar and of businesses with 10 to 40 mailbox users. answer the call. Norstar-to-Meridian Norstar Digital Networking • Calling Line ID is a powerful systems via PRI links Take advantage of the LAN/WAN your feature when combined with instant to the single sites. business already has in place—supporting access to customer information and Norstar VoIP Gateway Voice Profile for Internet Mail (VPIM) advanced call routing capabilities. Norstar VoIP Gateway enables trunk-side makes it easier for remote messaging Customer service representatives can IP connectivity for Norstar by providing systems to work together—even if they add new information and send this multi-site companies with direct inter- are from different manufacturers. Digital customer data along with the call office voice and fax traffic over an IP Networking lets you send voice mail when it’s necessary to transfer it to network. It also provides interoper- messages as data over your data network a specialist for further assistance. ability with other Norstar systems and rather than the telephone network— • efficiently routes customer Call Routing other Nortel Networks IP Telephony solu- reducing long-distance charges. It also calls—based on the time of day, tions, such as Business Communications reduces network usage by letting you send departmental activity, or your own Manager, Succession* 1000M, and a single message simultaneously to more criteria—for faster service, fewer calls Succession 1000. And, because the than one recipient. transferred, and happier customers. Norstar VoIP Gateway is interoperable with other Nortel systems, you have a solu- Computer Telephony Integration (CTI) Norstar Private Networking Bring the power of your most-used busi- Now small to medium-sized business tion that enables seamless interworking. ness tools together—your computer and offices can cost-effectively deliver the The Norstar VoIP Gateway provides a your telephone—so you can manage all advantages of shared applications to cost-effective IP enablement for current your communications right from your branch and remote offices, while provid- Norstar customers and is fully compatible desktop. You can get, use, move, and ing seamless access to applications from with software releases of MICS and CICS access information faster than ever before. the server at the main office, without Norstar systems. having to purchase external systems. 6 Figure 4: —Professional Norstar Integrated Call Center Communications Systems provide complete, integrated communications solutions to power businesses worldwide.
Norstar Modular ICS
Norstar VoIP Gateway
The VoIP Gateway supports quality voice, When your business grows through QoS, voice compression, echo beyond the capacity of Norstar cancellation, and buffers. It also supports Prelude ACD, upgrading to the common dialing plan and trunk CLID Norstar Cinphony ACD is a quick between Nortel Networks solution sites and easy installation of new software. (Norstar, Business Communications Manager, Succession 1000M, and Norstar Cinphony Automatic Call Norstar CallPilot Call Center Basic Succession 1000). Distribution (ACD) Norstar Call Center Basic, which is Norstar Cinphony ACD, which is supported by Norstar Modular ICS and supported by Norstar Modular ICS, Compact ICS, offers small businesses a Call centers offers additional capacity and supervisor Customers appreciate reaching the appro- cost-effective call center application to functions to meet the needs of growing priate person quickly to address their drive exceptional customer and increased businesses. Cinphony ACD is available needs, and customer call retention is revenue opportunities. with two different capacity levels: Level I crucial to your company’s success. Norstar supports up to 30 active representatives •Optional key code activation on makes call center capabilities realistic and 80 phone lines; Level II supports up CallPilot 100 and cost-effective. to 80 active representatives and 120 phone • Comes equipped on CallPilot 150 lines. In addition to all of the features of Norstar Prelude Automatic •Enables 2 queues and 10 active agents Prelude, Cinphony provides an impressive Call Distribution (ACD) array of powerful call center capabilities, • Call Center Reporting is also available Norstar Prelude ACD, which is including: via key code activation supported by Norstar Modular ICS, is designed for businesses with as many as •Intelligent call routing • Call Center Basic can be used on a ‘Try and Buy” basis with CallPilot 100 15 active telephone service representa- •Priority queuing for callers tives and from 5 to 30 incoming tele- •Export of ACD information to other phone lines. To help improve how your popular software tools for customized business handles inbound calls, this reporting versatile application offers: •Supervisor tools, such as information •Digital voice announcements played displays on the Norstar telephones, to callers on hold help requests from employees, and • Call overflow and other advanced call silent monitoring routing features •Provides 17 in-depth management • 17 in-depth management reports on reports agent, group, and system performance • “Longest idle” call distribution •Real-time group and system status displays
7 The Power of Norstar When you’re searching for a business communications system, there’s one name that appears time and time again—Norstar, from Nortel Networks. In fact, more people buy Norstar than any other voice solution in the world. Today, you’ll find Norstar telephones on the desks of more than 15 million people, in more than 80 countries around the globe, making Norstar the #1 voice solution in the world. And in 2001, Norstar achieved the ranking of #1 phone system in North America† as well. That’s because Norstar offers the advantage of sophisticated features that are easy to use and give businesses the flexibility to handle future growth and new services, too. Plus, Norstar offers outstanding quality, with one of the highest reliability ratings in the industry. Now that’s value that lasts!
† Source: InfoTrack for CPE and Multimedia 04/2001, Phillips InfoTech Consulting, Inc.
Nortel Networks is an industry leader and innovator focused on transforming how the world communicates and exchanges information. The Company is supplying its service provider and enterprise customers with communications technology and infrastructure to enable value-added IP data, voice and multimedia services spanning Wireless Networks, Wireline Networks, Enterprise Networks, and Optical Networks. As a global Company, Nortel Networks does business in more than 150 countries. More information about Nortel Networks can be found on the Web at: www.nortelnetworks.com/norstar
In the United States: In Canada: In Caribbean and Latin America: In Europe: In Asia: Nortel Networks Nortel Networks Nortel Networks Nortel Networks Nortel Networks 35 Davis Drive 8200 Dixie Road, 1500 Concorde Terrace Maidenhead Office Park 6/F Cityplaza 4 Research Triangle Park, Suite 100 Sunrise, Westacott Way Taikooshing North Carolina 27709 Brampton, Ontario L6T 5P6 Florida 33323 Maidenhead Berkshire SL6 3QH 12 Taikoo Wan Road USA Canada USA UK Hong Kong
For more information, contact your Nortel Networks representative, or call 1-800-4 NORTEL or 1-800-466-7835 from anywhere in North America.
*Nortel Networks, the Nortel Networks logo, the globemark, Meridian, and Norstar are trademarks of Nortel Networks. All other trademarks are the property of their owners. Copyright © 2004 Nortel Networks. All rights reserved. Information in this document is subject to change without notice. Nortel Networks assumes no responsibility for any errors that may appear in this document.
NN102220-011204 Cindy Sorum Proposal Prepared for: SHELBY COUNTY EMERGENCY MGMT. 5700 Culwells Rd. Address 612 COURT STREET Lincoln, NE 68516 City HARLAN 402-489-9911 - Phone State & Zip Code IA 51537 County SHELBY COUNTY EMERGENCY MGMT. 402-483-0365 - Fax Phone/FAX 712-755-5160 [email protected] Contact Name BOB SEIVERT Contact E-mail [email protected]
Door Access Control System ITEM QTY PART NO. DESCRIPTION UNIT EXTENDED 1 1 DOOR ACCESS SECURITY FOR 6 DOORS WILL INCLUDE THE FOLLOWING: $ 18,533.00 $ 18,533.00 SYSTEM (2) DOORS WILL HAVE ROSSLARE AY-Q12 VANDAL RESISTANT READERS WITH KEYPADS FOR$ - $ - ACTIVATION $ - $ - (2) DOORS WILL HAVE ROSSLARE AY-Q12 VANDAL RESISTANT READERS WITH KEYPADS ON$ - $ - ONE SIDE OF THE DOOR TO ENTER SECURE AREA; THE OTHER SIDE OF THE DOOR WILL$ - $ - HAVE MOTION ACTIVATED SENSORS TO ACTIVATE DOOR OPENING $ - $ - (2) DOORS WIL HAVE ROSSLARE AY-Q12 VANDAL RESISTANT READERS WITH KEYPADS ON$ - $ - ONE SIDE OF THE DOOR TO ENTER SECURE AREA; THE OTHER SIDE OF THE DOOR WILL$ - $ - REQUIRE A MOTION SENSOR ALLONG WITH A REQUEST TO EXIT BUTTON, WHICH WILL BE$ - $ - MOUNTED ON THE WALL NEXT TO THE DOOR. MAGNETIC LOCKS WILL BE INSTALLED AT THE$ - $ - TOP OF THE DOOR JAMB $ - $ - SYSTEM WILL INCUDE ALL WIRING, CONDUIT, AND WIRE MOLD FOR COMPLETE SYSTEM $ - $ - INSTALLATION. EXISTING FOOT CONTROLS AND RADIO CONTROLS, WHICH CURRENTLY$ - $ - OPERATE DOORS WILL BE INTEGRATED INTO THE NEW DOOR SECURITY SYSTEM. ALL$ - $ - WIRING INCLUDED IN THIS BID IS RATED FOR PLENUM ENVIRONMENTS. (50) CLAMSHELL $ - $ - PROXIMITY CARDS ARE INCLUDED IN THE PACKAGE $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - Total Equipment Price$ 18,533.00 Terms of Purchase: Net 30 Installation$ - Subtotal $ 18,533.00 Payment with Order: Tax Rate Taxes$ - Approximate Delivery Date: Shipping$ - -If applicable, product warranty: Total $ 18,533.00 -If applicable, network access fees: Proposal is valid for 60 days from the date listed below
System Description:
Proposal Presented By: Cindy Sorum Date: 12 31 09
Proposal Accepted By: Date:
RACOM Door Access Control Quote 12 31 09.xls - Printed 1/8/2010 AY-Q65,AY-T55,AY-S55 Vandal-ResistantProgrammableReaders(PiezoelectricKeypad)
TheAY-Q65Prox&PinReaderandAY-T55/AY-S55Pin readerscanbeprogrammedtofunctionwithavarietyof controllers. Description
Thesereadersaredesignedtointerfacetohostaccess controlpanelsthroughWiegandandClockData protocols(Multi-Format). ProximityCard(AY-Q65)dataissenttothehostineither 26-BitWiegandorClockDataformats.KeypadDatais sentinoneofseveralWiegandorClockDataformats. AY-Q65 AY-T55 Multi-Formatsettingsareprogrammedentirelythrough AY-S55 thepiezoelectrickeypadinterface. Built-inmulti-formatstandardkeypadforPINcode Features Singlekey,6-BitWiegand,Rosslareformat Singlekey,6-BitWiegand,NibbleandParities Weatherproof,vandal-resistantenclosures Singlekey,8-BitWiegand,Nibblescomplemented Built-inmulti-formatproximitycardreader(AY- 4keysbinary&facility code,26-BitWiegand Q65) 1to5keys+FacilityCode,26-BitWiegand 6keysBCDandParitiesBits,26-BitWiegand ReadRange(AY-Q65):65mm(2.5") Singlekey,3x4keypad(MD-P64) Built-inmulti-formatpiezoelectrickeypadforPIN 4keysbinary,Clock&Data codeentry LEDs Internalbuzzer Two-bi-coloredLEDs Built-incaseandbackTamper Includessecurityscrew andsecurityscrewtool Twostatus/programminginterfaceLEDs EnvironmentalCharacteristics Mountingtemplateforeasyinstallation OperatingTemperature: -25°Fto145°F(-31°C°to63°C) Specifications MechanicalCharacteristics OperatingVoltageRange Dimensions: 5-16VDCfromaregulatedpowersupply 4.72"(120mm)Lx3"(76mm)Wx1"(27mm)D MaximumInputCurrent Standby:40mA Weight:0.9lbs(410g) Read:130mA *MeasuredusingRosslareProximityCard(AT-11/12)or Built-inProximityReader(AY-Q65) equivalent.Rangealsodependsonelectricalenvironment (Clock&Dataand26-BitWiegandFormats) andproximitytometal. ReadRange*:65mm(2.5") Modulation:ASKat125kHz CompatibleCards:All26-BitEMCards
HeadOffice UnitedStates Europe RosslareEnterprisesLtd. RosslareSecurityProducts RosslareSecurityProductsS.r.l 905-912WingFatIndustrialBldg., 2001RelianceParkway,SuiteD ViaF.lliGabba5,20121Milano,Italy 12WangTaiRoad,KowloonBay,HongKong. Bedford,TX76021,USA. Tel:(39)038224800 Tel:(852)27955630Fax:(852)27951508 Tel:(817)6850162 Fax:(39)038224800 Enquiry:[email protected] Fax:(817)6959188 Enquiry: [email protected] Web-Site:http://www.rosslare.com.hk Enquiry:[email protected] [email protected] GE Security RCR-REX
The RCR-REX is a dual technology, request-to-exit sensor used for secure door egress and door access control. The RCR-REX combines the power of passive infrared and Doppler range-controlled radar technologies to provide the industry’s most secure request-to-exit sensor.
Historically, request-to-exit sensors DIP switch settings. Factory default is Features have not been used in sensitive areas 1/2 second, but can be adjusted to because they are easy to defeat. With 1, 2, 4, 8, 16, 32, or 64 seconds. • Proprietary GE dual technology— the RCR-REX, dual technology requires When the RCR-REX’s sounder is turned request-to-exit uses both RCR that both the unit’s PIR sensor and on, it produces an audible tone to and PIR to detect intruders RCR sensor detect intrusion activity warn of door-open-too-long (DOTL) • Incorporates two Form C output to trigger the internal relay. For conditions, depending on settings. relay contacts maximum protection, adjust the radar Fifteen seconds before the timer so that the curtain is above the floor; • Tamper switch detects device closes the lock relay contacts and open objects slipped under the door will not opens the monitor relay contacts activate the sensor, making it virtually to send an alarm signal. Closing the • Includes mask for easy impossible to defeat. door silences the sounder, while new adjustment of PIR field of view The sensor has two detection patterns, movement restarts the timer and • Optional single gang wall plate the infrared PIR and the Range resets the sounder. A beeping tone will • Swing open design allows easy Controlled Radar, that are adjusted sound at the end of the external input adjustment independently. Radar range can be signal if the door is open. • Housing available in white, gray, adjusted from 3 to 15 feet (1 to 4.5 m) An LED indicator turns red for the or black and can be set to just above the floor duration of the lock relay time when • Built-in adjustable sounder for if desired. motion is detected and flashes twice door position monitoring Two Form C output relay contacts are per second during the 20-second used to switch a door lock and shunt warm-up period. It turns yellow when • Wall or ceiling mount a door switch. The RCR-REX’s flexible the radar detects motion, and green • Dual relay outputs lock relay may be set to either Fail with the passive infrared detects Safe or Fail Secure mode for operation motion. when the unit is not powered. A tamper switch identifies when the The user can determine lock relay housing cover is opened. activation times with easy-to-change RCR-REX Dual technology request-to-exit motion sensor Specifications Americas Electrical Environmental 503-885-5700 • Voltage: 12 to 30 VAC/VDC • Operating temperature: -20 to 120°F (-29 to 50°C) 888-GE-SECURITY • Current: 23 mA typical, 28 mA max. @ 12 VDC; 15 • Relative humidity: 0 to 95% noncondensing (437-3287) mA typical, 17 mA max. @ 24 VDC; 31 mA typical, • RFI immunity: 10 V/m @ 80 MHz to 2 GHz faxback 800-483-2495 38 mA max. at 12 VAC; 26 mA typical, 29 mA max. • Static immunity: 10 kV [email protected] at 24 VAC • Lightning immunity: 2.3 kV @ 1.4 J www.gesecurity.com • Time delay: 1/2, 1, 2, 4, 8, 16, 32, 64 sec. at ± 10%, Physical selectable • Dimensions (HxWxD): 1.76 x 7.395 x 1.85 in. (45 x Asia • Loop type: Open or Closed 188 x 47 mm) tel 852-2907-8108 • Max. loop rating: 2 A @ 30 VDC • Weight: 9.2 oz. (261 g) fax 852-2142-5063 • Alarm output: DPDT (Form C) • Housing material: ABS plastic • Tamper output: 50 mA @ 30 VDC • Colors: White, black, gray Australia • Wire gauge: AWG 14 to 22 (18 to 22 recommended) tel 61-3-9259-4700 • Mounting height: 7 to 15 ft. (2.13 to 4.57 m) typical fax 61-3-9259-4799 Features Regulatory • Radar frequency: 5.8 GHz • FCC, CE, UL, CUL Europe • Range, depth: 3 to 15 ft. (0.9 to 4.57 m) adjustable tel 32-2-725-11-20 • Range, width: 7.9 ft. (2.4 m) fax 32-2-721-86-13 • Range, PIR: 15 ft. (4.6 m), adjustable Latin America tel 305-593-4301 fax 305-267-4300
Dimensions Ordering information RCR-REX-W Dual technology request-to-exit motion sensor, DPDT, Form C, includes wall plate, white RCR-REX-B Dual technology request-to-exit motion sensor, DPDT, Form C, includes wall plate, black RCR-REX-G Dual technology request-to-exit motion sensor, DPDT, Form C, includes wall plate, gray
Coverage Patterns Accessories RCR-WP-W Single gang wall plate, 2.25 x 8.375 in. (57 x 213 mm), white RCR-WP-B Single gang wall plate, 2.25 x 8.375 in. (57 x 213 mm), black RCR-WP-G Single gang wall plate, 2.25 x 8.375 in. (57 x 213 mm), gray
© 2006 GE Security. As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online at www.GESecurity.com or contact your GE Security sales representative. 20060103_DS_RCR-REX / 466-176 Cindy Sorum Proposal Prepared for: SHELBY COUNTY EMERGENCY MGMT. 5700 Culwells Rd. Address 612 COURT STREET Lincoln, NE 68516 City HARLAN 402-489-9911 - Phone State & Zip Code IA 51537 County SHELBY COUNTY EMERGENCY MGMT. 402-483-0365 - Fax Phone/FAX 712-755-5160 [email protected] Contact Name BOB SEIVERT Contact E-mail [email protected]
Replacement Infrastructure Equipment - Narrow Banding ITEM QTY PART NO. DESCRIPTION UNIT EXTENDED 1 1 SXHMCX LANDFILL - 110 WATT, VHF MASTR III REPEATER WITH PROGRAMMING AND INSTALLATION$ 6,068.25 $ 6,068.25 $ - $ - 2 1 SXHMCX TENANT - 110 WATT, VHF MASTR III REPEATER WITH PROGRAMMING AND INSTALLATION$ 6,068.25 $ 6,068.25 $ - $ - 3 1 SXHMCX COM CENTER - 110 WATT, VHF MASTR III REPEATER WITH PROGRAMMING AND INSTALLATION$ 6,068.25 $ 6,068.25 $ - $ - 4 1 AUXILIARY COM CENTER - (3) VHF MASTR III AUXILIARY RECEIVERS, (2) MASTR III AUXILIARY RECEIVER $ 10,629.75 $ 10,629.75 RECEIVERS SHELVES, (1) POWER SUPPLY, 120 VAC, 47-63 HZ, 12 VDC, (1) BLANK PANEL, (2) POWER CABLES $ - $ - WITH PROGRAMMING, CONFIGURATION AND INSTALLATION $ - $ - $ - $ - 5 1 OPS CONTROL COM CENTER - KENWOOD 30 WATT, VHF TK 7180 CONTROL STATION WITH BACKLIT LCD, 12 $ 929.20 $ 929.20 STATION CHARACTER ALPHANUMERIC ALIASES, DATE AND 12/24 HOUR TIME CLOCK, CHANNEL GUARD,$ - $ - DIGITAL CHANNEL GUARD, TWO-TONE DECODE, CPI DC REMOTE WITH ENCLOSURE AND $ - $ - INTERFACE CABLE, PROGRAMMING AND INSTALLATION $ - $ - $ - $ - REPROGRAMMING SITE EQUIPMENT $ - $ - 6 1 LANDFILL REPROGRAM OPS, AVL, COUNTY ROADS AND STANDBY REPEATERS AT LANDFILL$ 440.00 $ 440.00 2 COM CENTER REPROGRAM MOTOROLA 1225 AND 1250 RADIOS $ 65.00 $ 130.00 1 ELKHORN REPROGRAM ELKHORN REPEATER $ 176.00 $ 176.00
LOCAL PORTABLE COVERAGE EXPANSION* $ - $ - 7 1 PORTSMOUTH INCLUDES: (1) 50 WATT, CONTINUOUS DUTY, VHF REPEATER WITH DUPLEXER, PROGRAMMING,$ 4,918.10 $ 4,918.10 TABLE RACK, POWER SUPPLY, OMNI-DIRECTIONAL ANTENNA, CONNECTORS, LIGHTNING$ - $ - PROTECTION, JUMPERS, STAGING AND TESTING $ - $ - $ - $ - 8 1 PANAMA INCLUDES: (1) 50 WATT, CONTINUOUS DUTY, VHF REPEATER WITH DUPLEXER, PROGRAMMING, $ 4,918.10 $ 4,918.10 TABLE RACK, POWER SUPPLY, OMNI-DIRECTIONAL ANTENNA, CONNECTORS, LIGHTNING$ - $ - PROTECTION, JUMPERS, STAGING AND TESTING $ - $ - Total Equipment Price$ 50,182.10 Terms of Purchase: Net 30 Installation$ - Subtotal $ 50,182.10 Payment with Order: $10,000 Tax Rate Taxes$ - Approximate Delivery Date: 6 Weeks Shipping$ 750.00 -If applicable, product warranty: Total $ 50,932.10 -If applicable, network access fees: Proposal is valid for 60 days from the date listed below
System Description: * Installation for local coverage expansion repeaters will be quoted separately based upon location requirements. Customer will be responsible for providing a location with power to house the repeater and mount the antenna. These systems require an additional VHF frequency and are contingent upon licensing.
Proposal Presented By: Cindy Sorum Date: 01 07 10
Proposal Accepted By: Date:
Narrow Banding Site Equipment Quote 01 07 10.xls - Printed 1/7/2010 Page 2
ITEM QTY Part No. DESCRIPTION UNIT EXTENDED 9 1 DEFIANCE INCLUDES: (1) 50 WATT, CONTINUOUS DUTY VHF REPEATER WITH DUPLEXER, PROGRAMMING, $ 4,918.10 $ 4,918.10 TABLE RACK, POWER SUPPLY, OMNI-DIRECTIONAL ANTENNA, CONNECTORS, LIGHTNING$ - $ - PROTECTION, JUMPERS, STAGING AND TESTING $ - $ - $ - $ - 10 1 SHELBY INCLUDES: (1) 50 WATT, CONTINUOUS DUTY VHF REPEATER WITH DUPLEXER, PROGRAMMING, $ 4,918.10 $ 4,918.10 TABLE RACK, POWER SUPPLY, OMNI-DIRECTIONAL ANTENNA, CONNECTORS, LIGHTNING$ - $ - PROTECTION, JUMPERS, STAGING AND TESTING $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ - $ -
Narrow Banding Site Equipment Quote 01 07 10.xls - Printed 1/7/2010
NARROWBANDING
The spreadsheets provided by Shelby County have been modified to include either a notes/comments column or a narrowband capable column.
After researching the various models we have indicated their narrowband capability in those columns with the following:
• Yes – Unit is capable of narrow band operation • No – Unit needs to be replaced • ? – We need more information to determine status • Factory Modification – Will need to be sent to the manufacturer for modification
RACOM will reprogram the Shelby County equipment at predetermined locations to achieve narrowband compliance. The programming will include all service calls, labor and testing to accomplish this task.
This assumes all equipment will be available at the location and includes (1) reprogramming per piece of equipment.
Note: It appears most AVL radios were not included in the lists provided.
Cost:
Research and Program Building: $1,900 Mobile/Portable Radios: $50.00 each Pagers: $35.00 each
Conventional MASTR® III Station
VHF, UHF, 800 MHz
The Conventional MASTR III Base Station provides A comprehensive array of control capabilities The latest in digital signal processing technology Fully shielded and removable modules, front-mounted controls, and remote diagnostics
The Conventional MASTR III quickly, easily, and affordably. Backward Compatible provides the flexibility to In addition, the MASTR III can The MASTR III Base Station change system setup as nec- operate in either a wideband can be used in combination essary. Whether users are (25 kHz) or narrowband (12.5 with MASTR II or IIe stations. designing a system, program- kHz) mode. The MASTR III is readily ming radio functions, or The modular design of the upgradeable through software arranging an installation site, MASTR III Base Station revisions. MASTR III keeps pace with makes maintenance and their needs. servicing simple and fast. Each module furnishes easy- Flexible, Efficient Design to-read indications of proper The microprocessor- operation. controlled, PC programmable Equipment is available in options provide flexibility, 37-inch, 69-inch, or 83-inch simplified setup, and easy field cabinets or an 86-inch open upgrades. The fully synthe- rack. sized design of the MASTR III Base Station allows the user to make frequency changes
RF Communications | P. O. Box 2000 | Lynchburg, VA USA 24501 www.harris.com | 1-800-368-3277 (+1-434-455-6403) Harris, assuredcommunications, and MASTR are registered trademarks of Harris Corporation. Aegis is a trademark of Harris Corporation. Copyright 2009 Harris Corporation. All rights reserved. Printed in U.S.A. 07/09 ECR-5778T
Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws.
Conventional Conventional General Specifications Options and Accessories INDOOR CABINET (Floor Mount) Service Speaker: 1W @ 8 Tone and DC Remote Controlled Stations CABINET 37 in. 69 in. 83 in. Service Microphone: Transistorized Dynamic Programmable Options Audio (Line to Transmitter) Size [in. (mm)] Duty Cycle (EIA) Continuous: Transmit/Receive - 100% Line Terminating Impedance: 600 Height 37.0 (940) 69.1 (1750) 83 (209) Ambient Temperature (or full spec performance per EIA): o o Transmit Frequencies Line Level (Adjustable): -20 to +7 dBm Width 21.5 (550) 23.1 (590) 23-3/16 (59) -22 to +140 F (-30 to +60 C) Depth 18.25 (460) 21.0 (533) 21 (53.3) Humidity (EIA): o o Frequency Response: ±3 dB @ 300-3000 Hz 90% @ 122 F (50 C) Receive Frequencies Input Power Source: 120 VAC (±20%), 47-63 Hz Tone Control Channel Guard Digital and Tone Weight (min) [(lb (kg)] Optional Input Power Source: 230 VAC (±15%), 47-63 Hz Function Tones: 1050,1150,1250,1350,1450, Continuous Duty 121 (55) 576 (261) 693 (315) Standby Battery Source: 26.4 VDC, 50 AHR (min.) Channel Guard Disable 1550,1650, 1750,1850,1950 and 2050 Hz Packed, Domestic Shipping 136 (62) 606 (275) 729 (331) Antenna Connections: Type N Repeater Disable Secur-it Tone and Transmit Tone: 2175 Hz Length of AC Power Cable: 10 ft (3048 mm) Transmitted 2175 Hz Tone Level: 20 dB Below Voice Number of Rack Units 17 33 41 Metering: Provided through Handset or TQ0619 Software Intercom Function Permissible Control Line Loss Max. Units w/Power Supply 1 4 5 Altitude: @2175 Hz: 27 dB NOTE: One rack unit equals 1.75 inches. Stations occupy 6 rack units of cabinet space. Operable: Up to 15,000 ft (4,570 m) DTMF Decode Shippable: Up to 50,000 ft (15,250 m) Audio (Receiver to Line) Mean Time Between Failure (MTBF): 150,000 hours Morse Code ID Audio Amplifier Input Impedance: 10 K Input Level: 1 V RMS (for 5 kHz Deviation) Squelch Tail Elimination (STE) Source Power Drain VHF UHF 800 Output Impedance to Line: 600 Frequency Range (MHz) 136-174 380-512 851-870 Tx Carrier Control Timer Output Level to Line Voice (1 kHz ref): +7 dBm (Adjustable) 806-825 Rx Station Control Tone (1 kHz ref): +7 dBm (Reference 7 dBm) AC Input Power 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC Frequency Response: +1 and -3 dB @ 300-3000 Hz DC Input Power (A) VDC DC Control Tx 13.8 2 2 2 Hum and Noise, Noise Squelch: -55 dB (Reference 7 dBm) Rx only 13.8 2 2 2 Tone Control Tone Squelch: -30 dB (Reference 7 dBm) Tx (full/half power) 26.4 12/8 12/8 12/8 Rx only 26.4 0.5 0.5 0.5 Repeater DC Control Control Currents: -2.5, ±6, and ±11 mA Line Loop Resistance (maximum): 11 K (Includes 3K Termination) Transmitter (All specifications measured per TIA/EIA-603 Procedure) DC/Repeat VHF UHF 800 Tone/Repeat Frequency Range (MHz) 136-174 380-512 851-870 Rated Power Output (W) 110 100 100 2- or 4-Wire Audio RF Output Impedance () 50 50 50 Conducted Spurious and Scan Harmonic Emission (dBm) -36 -36 -36 Frequency Stability (ppm) ±1.0 ±1.0 ±1.0 Additional Options Modulation Deviation (kHz) Wideband 0 to ±5 0 to ±5 0 to ±5 Service Microphone Narrowband 0 to ±2.5 0 to ±2.5 NA Antenna Multicoupler NPSPAC NA NA 0 to ±4 FM Noise (dB) -55 -55 -55 230V Power Supply Channel Spacing (kHz) 12.5/25/30 12.5/25 25 12.5 (NPSPAC) Duplexer Synthesizer Step Size (kHz) 1.25 1.25 6.25 Frequency Spread Full Spec (MHz) 2 2 0.5 Antenna Relay (VHF/UHF) Audio Distortion (@ 1 kHz): Less than 3%
SQUELC VOLUME PA DATA MIC H ALARM PORT Number of Channels (Conventional): Up to 12 Combiner Audio Response (pre-emphasis): Within +1/-3 dB of 6 dB/octave, 300 to 3000 Hz per EIA TX RX RX RX ADVANCE DIGITAL CAPABLE SYNTHESIZER SYNTHESIZER FRONT END IF
DSP PORT NOTE: Rated power output is measured at the transmitter power amplifier output connector per FCC Type Acceptance filing information. Any customer-required optional items SYSTEM POWER MODULE MODULE Isolator such as power measuring devices and/or duplexers will introduce loss between the transmitter output connector and the station cabinet output connector. This loss will Squelch-Operated Relay reduce the available power at the station connector. Receiver (All specifications measured per TIA/EIA-603 Procedure) Station Power DC output ON
DC output OFF Remote Controllers AC POWER 27.2 VDC 13.6 VDC 100-120 VAC, 50/60 HZ, 4 Amp MAX TOTAL VHF UHF 800 Battery Standby Frequency Range (MHz) 136-174 380-512 806-825 Battery Charger RF Input Impedance () 50 50 50 Channel Spacing (kHz) 12.5/25/30 12.5/25 12.5 (NPSPAC)/25 Gel Cell Battery Synthesizer Step Size (kHz) 1.25 1.25 6.25 Sensitivity (dBm) EIA 12 dB SINAD -116 (0.35 V) -116 (0.35 V) -118 (0.28 V) Voice Guard Encryption Threshold Squelch (dBm) -119 (0.25 V) -119 (0.25 V) -121 (0.18 V) One Conventional Channel Selectivity EIA 2-Signal (dB) Aegis™ Digital 12.5 kHz 75 75 20 (NPSPAC) Switchable Channel Spacing 25 kHz 85 85 85 30 kHz 90 NA NA Frequency Stability (ppm) ±1.0 ±1.0 ±1.0 Signal Displacement Bandwidth (kHz) 12.5:±1, 25/30:±2 12.5:±1, 25:±2 25:±2 Regulatory Data Intermodulation (dB) 12.5 kHz 75 75 NA Frequency Power Output FCC Type Applicable Industry Applicable CE NTIA 25 kHz 80 80 80 Range (Adjustable) Acceptance FCC Rules Canada Industry Marking Certification 30 kHz 80 NA NA (MHz) (W) Number Certification Canada Number Spurious and Image Rejection (dB) 90 90 90 Number Rules Frequency Spread Full Specs. (MHz) 2.0 2.0 0.5 136-174 10-110 OWDTR-0032-E 22, 90 3636B-0017 RSS-119 Stations available JF-1208074 Audio Response (de-emphasis): Within +2/-8 dB of 6 dB/octave (@ Local Speaker), 300 to 3000 Hz per EIA 403-450 10-100 OWDTR-0038-E 90 3636B-0038 RSS-119 in UHF that meet JF-1208074 Within +1/-3 dB of 6 dB/octave (@ Line Output), 300 to 3000 Hz per EIA Audio Output: 1 Watt at less than 3% distortion @ 1000 Hz, 25/30 kHz Channel the following: (380-400, 403-425) 450-512 10-100 OWDTR-0039-E 22, 90, 74 3636B-0039 RSS-119 ETS 300 086 NA ETS 300 219 ETS 300 113
806-870 10-100 OWDTR-0036-E 90 3636-194-215 RSS-119 NA NA
Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws. Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws.
Conventional Conventional General Specifications Options and Accessories INDOOR CABINET (Floor Mount) Service Speaker: 1W @ 8 Tone and DC Remote Controlled Stations CABINET 37 in. 69 in. 83 in. Service Microphone: Transistorized Dynamic Programmable Options Audio (Line to Transmitter) Size [in. (mm)] Duty Cycle (EIA) Continuous: Transmit/Receive - 100% Line Terminating Impedance: 600 Height 37.0 (940) 69.1 (1750) 83 (209) Ambient Temperature (or full spec performance per EIA): o o Transmit Frequencies Line Level (Adjustable): -20 to +7 dBm Width 21.5 (550) 23.1 (590) 23-3/16 (59) -22 to +140 F (-30 to +60 C) Depth 18.25 (460) 21.0 (533) 21 (53.3) Humidity (EIA): o o Frequency Response: ±3 dB @ 300-3000 Hz 90% @ 122 F (50 C) Receive Frequencies Input Power Source: 120 VAC (±20%), 47-63 Hz Tone Control Channel Guard Digital and Tone Weight (min) [(lb (kg)] Optional Input Power Source: 230 VAC (±15%), 47-63 Hz Function Tones: 1050,1150,1250,1350,1450, Continuous Duty 121 (55) 576 (261) 693 (315) Standby Battery Source: 26.4 VDC, 50 AHR (min.) Channel Guard Disable 1550,1650, 1750,1850,1950 and 2050 Hz Packed, Domestic Shipping 136 (62) 606 (275) 729 (331) Antenna Connections: Type N Repeater Disable Secur-it Tone and Transmit Tone: 2175 Hz Length of AC Power Cable: 10 ft (3048 mm) Transmitted 2175 Hz Tone Level: 20 dB Below Voice Number of Rack Units 17 33 41 Metering: Provided through Handset or TQ0619 Software Intercom Function Permissible Control Line Loss Max. Units w/Power Supply 1 4 5 Altitude: @2175 Hz: 27 dB NOTE: One rack unit equals 1.75 inches. Stations occupy 6 rack units of cabinet space. Operable: Up to 15,000 ft (4,570 m) DTMF Decode Shippable: Up to 50,000 ft (15,250 m) Audio (Receiver to Line) Mean Time Between Failure (MTBF): 150,000 hours Morse Code ID Audio Amplifier Input Impedance: 10 K Input Level: 1 V RMS (for 5 kHz Deviation) Squelch Tail Elimination (STE) Source Power Drain VHF UHF 800 Output Impedance to Line: 600 Frequency Range (MHz) 136-174 380-512 851-870 Tx Carrier Control Timer Output Level to Line Voice (1 kHz ref): +7 dBm (Adjustable) 806-825 Rx Station Control Tone (1 kHz ref): +7 dBm (Reference 7 dBm) AC Input Power 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC 5A @ 120 VAC or 3A @ 230 VAC Frequency Response: +1 and -3 dB @ 300-3000 Hz DC Input Power (A) VDC DC Control Tx 13.8 2 2 2 Hum and Noise, Noise Squelch: -55 dB (Reference 7 dBm) Rx only 13.8 2 2 2 Tone Control Tone Squelch: -30 dB (Reference 7 dBm) Tx (full/half power) 26.4 12/8 12/8 12/8 Rx only 26.4 0.5 0.5 0.5 Repeater DC Control Control Currents: -2.5, ±6, and ±11 mA Line Loop Resistance (maximum): 11 K (Includes 3K Termination) Transmitter (All specifications measured per TIA/EIA-603 Procedure) DC/Repeat VHF UHF 800 Tone/Repeat Frequency Range (MHz) 136-174 380-512 851-870 Rated Power Output (W) 110 100 100 2- or 4-Wire Audio RF Output Impedance () 50 50 50 Conducted Spurious and Scan Harmonic Emission (dBm) -36 -36 -36 Frequency Stability (ppm) ±1.0 ±1.0 ±1.0 Additional Options Modulation Deviation (kHz) Wideband 0 to ±5 0 to ±5 0 to ±5 Service Microphone Narrowband 0 to ±2.5 0 to ±2.5 NA Antenna Multicoupler NPSPAC NA NA 0 to ±4 FM Noise (dB) -55 -55 -55 230V Power Supply Channel Spacing (kHz) 12.5/25/30 12.5/25 25 12.5 (NPSPAC) Duplexer Synthesizer Step Size (kHz) 1.25 1.25 6.25 Frequency Spread Full Spec (MHz) 2 2 0.5 Antenna Relay (VHF/UHF) Audio Distortion (@ 1 kHz): Less than 3%
SQUELC VOLUME PA DATA MIC H ALARM PORT Number of Channels (Conventional): Up to 12 Combiner Audio Response (pre-emphasis): Within +1/-3 dB of 6 dB/octave, 300 to 3000 Hz per EIA TX RX RX RX ADVANCE DIGITAL CAPABLE SYNTHESIZER SYNTHESIZER FRONT END IF
DSP PORT NOTE: Rated power output is measured at the transmitter power amplifier output connector per FCC Type Acceptance filing information. Any customer-required optional items SYSTEM POWER MODULE MODULE Isolator such as power measuring devices and/or duplexers will introduce loss between the transmitter output connector and the station cabinet output connector. This loss will Squelch-Operated Relay reduce the available power at the station connector. Receiver (All specifications measured per TIA/EIA-603 Procedure) Station Power DC output ON
DC output OFF Remote Controllers AC POWER 27.2 VDC 13.6 VDC 100-120 VAC, 50/60 HZ, 4 Amp MAX TOTAL VHF UHF 800 Battery Standby Frequency Range (MHz) 136-174 380-512 806-825 Battery Charger RF Input Impedance () 50 50 50 Channel Spacing (kHz) 12.5/25/30 12.5/25 12.5 (NPSPAC)/25 Gel Cell Battery Synthesizer Step Size (kHz) 1.25 1.25 6.25 Sensitivity (dBm) EIA 12 dB SINAD -116 (0.35 V) -116 (0.35 V) -118 (0.28 V) Voice Guard Encryption Threshold Squelch (dBm) -119 (0.25 V) -119 (0.25 V) -121 (0.18 V) One Conventional Channel Selectivity EIA 2-Signal (dB) Aegis™ Digital 12.5 kHz 75 75 20 (NPSPAC) Switchable Channel Spacing 25 kHz 85 85 85 30 kHz 90 NA NA Frequency Stability (ppm) ±1.0 ±1.0 ±1.0 Signal Displacement Bandwidth (kHz) 12.5:±1, 25/30:±2 12.5:±1, 25:±2 25:±2 Regulatory Data Intermodulation (dB) 12.5 kHz 75 75 NA Frequency Power Output FCC Type Applicable Industry Applicable CE NTIA 25 kHz 80 80 80 Range (Adjustable) Acceptance FCC Rules Canada Industry Marking Certification 30 kHz 80 NA NA (MHz) (W) Number Certification Canada Number Spurious and Image Rejection (dB) 90 90 90 Number Rules Frequency Spread Full Specs. (MHz) 2.0 2.0 0.5 136-174 10-110 OWDTR-0032-E 22, 90 3636B-0017 RSS-119 Stations available JF-1208074 Audio Response (de-emphasis): Within +2/-8 dB of 6 dB/octave (@ Local Speaker), 300 to 3000 Hz per EIA 403-450 10-100 OWDTR-0038-E 90 3636B-0038 RSS-119 in UHF that meet JF-1208074 Within +1/-3 dB of 6 dB/octave (@ Line Output), 300 to 3000 Hz per EIA Audio Output: 1 Watt at less than 3% distortion @ 1000 Hz, 25/30 kHz Channel the following: (380-400, 403-425) 450-512 10-100 OWDTR-0039-E 22, 90, 74 3636B-0039 RSS-119 ETS 300 086 NA ETS 300 219 ETS 300 113
806-870 10-100 OWDTR-0036-E 90 3636-194-215 RSS-119 NA NA
Conventional MASTR® III Station
VHF, UHF, 800 MHz
The Conventional MASTR III Base Station provides A comprehensive array of control capabilities The latest in digital signal processing technology Fully shielded and removable modules, front-mounted controls, and remote diagnostics
The Conventional MASTR III quickly, easily, and affordably. Backward Compatible provides the flexibility to In addition, the MASTR III can The MASTR III Base Station change system setup as nec- operate in either a wideband can be used in combination essary. Whether users are (25 kHz) or narrowband (12.5 with MASTR II or IIe stations. designing a system, program- kHz) mode. The MASTR III is readily ming radio functions, or The modular design of the upgradeable through software arranging an installation site, MASTR III Base Station revisions. MASTR III keeps pace with makes maintenance and their needs. servicing simple and fast. Each module furnishes easy- Flexible, Efficient Design to-read indications of proper The microprocessor- operation. controlled, PC programmable Equipment is available in options provide flexibility, 37-inch, 69-inch, or 83-inch simplified setup, and easy field cabinets or an 86-inch open upgrades. The fully synthe- rack. sized design of the MASTR III Base Station allows the user to make frequency changes
RF Communications | P. O. Box 2000 | Lynchburg, VA USA 24501 www.harris.com | 1-800-368-3277 (+1-434-455-6403) Harris, assuredcommunications, and MASTR are registered trademarks of Harris Corporation. Aegis is a trademark of Harris Corporation. Copyright 2009 Harris Corporation. All rights reserved. Printed in U.S.A. 07/09 ECR-5778T
MASTR® III Auxiliary Receiver VHF, UHF, 800 MHz
The Conventional MASTR III Auxiliary Receiver Uses the same receiver and control modules as the MASTR III Station
Operates in wideband or narrowband mode
Provides multi-channel capability
Feature Advantages either a wideband (25 kHz) or The MASTR III Auxiliary The MASTR III Auxiliary narrowband (12.5 kHz) mode. Receiver utilizes the same Receiver is a fully synthesized Other MASTR III Auxiliary receiver and control modules receiver, thus eliminating the Receiver features include included with the MASTR III need for crystals and providing Base Station. These compo- Programmable Channel multi-channel capability. In nents provide the same Guard monitoring addition, the MASTR III Auxiliary reliability, superior specifica- Receiver is programmable, Control channel option tions, and flexibility on the which provides greater flexibility Remote programming MASTR III Auxiliary Receiver in meeting customized require- capabilities that they demonstrate on the ments. MASTR III receivers MASTR III Base Station. have the capability to operate in
Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws.
General Specifications Panel Dimensions: Line Output: Source Power*: Conventional 4 Rack Units - Up to 2 Power Level: -19 to +6dBm AC Input Power: 120 VAC 20%, 47-63 Hz Receivers Interface: 2-Wire 1.25A Height: 7.0 in. (178 mm) Termination Imp.: 600 230 VAC 15%, 47-63 Hz Width: 19.0 in. (483 mm) Rack Capacity: 0.7A Ambient Temperature Cabinet, in. No. of DC Input Power: 13.8 VDC 20% (or full spec performance per EIA): Shelves/Receivers 2.5A -22 to +140F 37 3/6 11.0 VDC 20% (-30 to +60C) 69 4/8 3.0A Humidity (EIA): 83 5/10 *One shelf, two receivers 90% @ 122F 86 (open rack) 5/10 (50C) Service Speaker: 2W @ 8
Receiver Specifications VHF UHF 800 Frequency Range (MHz): 136-174 380-512 806-825 RF Input Impedance (): 50 50 50 Channel Spacing (kHz): 12.5/25/30 12.5/25 25 (NPSPAC) Sensitivity (dBm) EIA 12 dB SINAD: -116 (0.35 V) -116 (0.35 V) -119 (0.25 V) Threshold Squelch (dBm): -119 (0.25 V) -119 (0.25 V) -122 (0.18 V) Selectivity EIA 2-Signal (dB) 12.5 kHz: 75 75 20 (NPSPAC) 25 kHz: 85 85 85 30 kHz: 90 NA NA Frequency Stability (ppm): ±1.0 ±1.0 ±1.0 Signal Displacement Bandwidth (kHz): 12.5: ±1.0, 25/30: ±2.0 12.5: ±1.0, 25: ±2.0 25: ±2.0 Intermodulation (dB) 12.5 kHz: 75 75 NA 25 kHz: 80 80 80 30 kHz: 80 NA NA Spurious & Image Rejection (dB): 90 90 90 Frequency Spread Full Specs. (MHz): 2.0 2.0 0.5 3 dB Degradation in Sensitivity 3.0 3.0 NA (MHz): Audio Response (de-emphasis): Within +2 and -8 dB of 6 dB/octave (@ Local Speaker), 300 to 3000 Hz per EIA/TIA Within +1 and -3 dB of 6 dB/octave (@ Line Output), 300 to 3000 Hz per EIA/TIA Audio Output: 1 Watt at less than 3% distortion @ 1000 Hz, 25/30 kHz Channel Regulatory Data
Frequency Applicable Applicable Range (MHz) FCC Rules Industry Canada Rules 136-174 Part 15 RSS-119 380-512 Part 15 RSS-119 806-825 Part 15 RSS-119
RF Communications | P. O. Box 2000 | Lynchburg, VA USA 24501 www.harris.com | 1-800-368-3277 (+1-434-455-6403) Harris, assuredcommunications, and MASTR are registered trademarks of Harris Corporation. Copyright 2009 Harris Corporation. All rights reserved. Printed in U.S.A. 07/09 ECR-5775M