View of Marine Science by Annual Reviews

Total Page:16

File Type:pdf, Size:1020Kb

View of Marine Science by Annual Reviews Florida State University Libraries 2015 Isolation of Marine Siderophores by Immobilized Metal Affinity Chromatography Carley Farst Follow this and additional works at the FSU Digital Library. For more information, please contact [email protected] FLORIDA STATE UNIVERSITY COLLEGE OF ARTS AND SCIENCES ISOLATION OF MARINE SIDEROPHORES BY IMMOBILIZED METAL AFFINITY CHROMATOGRAPHY By CARLEY FARST A Dissertation submitted to the Department of Chemistry and Biochemistry in partial fulfillment of the requirements for the degree of Doctor of Philosophy 2015 Carley Farst defended this dissertation on July 30, 2015. The members of the supervisory committee were: William M. Landing Co-Professor Directing Dissertation William T. Cooper Co-Professor Directing Dissertation Vincent Salters University Representative Alan G. Marshall Committee Member Albert Stiegman Committee Member The Graduate School has verified and approved the above-named committee members, and certifies that the dissertation has been approved in accordance with university requirements. ii I would like to dedicate this dissertation to my father, Troy Timothy Farst (b.1956-d.2011). iii ACKNOWLEDGMENTS Alexandra Stenson for assisting in my understanding of mass spectrometry. Umesh Goli for teaching me how to use the time of flight mass spectrometer and quadrupole mass spectrometer. Huan Chen for running my samples on the Fourier Transform Ion Cyclotron Resonance mass spectrometer. My friends and family for providing me the necessary emotional support to finish my degree. iv TABLE OF CONTENTS List of Tables ................................................................................................................................. vi List of Figures ............................................................................................................................... vii Abstract ......................................................................................................................................... xii 1. BACKGROUND ........................................................................................................................1 1.1 Introduction ..........................................................................................................................1 1.2 IMAC ...................................................................................................................................6 2. METHOD DEVELOPMENT ...................................................................................................14 2.1 Method Concept .................................................................................................................14 2.2 Method Outline ..................................................................................................................15 2.3 Sample Collection ..............................................................................................................15 2.4 IMAC .................................................................................................................................16 2.5 SPE .....................................................................................................................................20 2.6 Gauging Instrumental Response ........................................................................................20 2.7 Final Method ......................................................................................................................21 3. METHOD APPLICATION ......................................................................................................36 3.1 Outline................................................................................................................................36 3.2 Sample Collection ..............................................................................................................37 3.3 Sample Processing .............................................................................................................37 3.4 Sample Analysis.................................................................................................................38 3.5 Results ................................................................................................................................39 4. DISCUSSION ............................................................................................................................58 4.1 Isolation of Marine Siderophores ........................................................................................58 4.2 Characterization of Marine Siderophores ...........................................................................60 4.3 Implications of Our Research Project .................................................................................63 APPENDIX A. LIST OF SIDEROPHORES ................................................................................71 BIBLIOGRAPHY ..........................................................................................................................78 BIOGRAPHICAL SKETCH .........................................................................................................81 v LIST OF TABLES Table 1.1 Proteins Requiring Iron And Their Associated Functions (Twining And Baines) ...8 Table 1.2 Typical Siderophore Functional Groups and Their pKa Values (Hider and Kong) ..9 Table 2.1 ESI-TOF MS Settings ............................................................................................24 Table 2.2 ESI Quattro MS Settings .........................................................................................25 Table 2.3 Measuring SPE Extraction Efficiency ....................................................................26 Table 2.4 Measuring Flow Rate ..............................................................................................26 Table 2.5 Iron Addition Experiment .......................................................................................26 Table 2.6 Testing Different Volumes of Sample ....................................................................26 Table 2.7 Gauging Instrument Response Reproducibility Over Time ....................................27 Table 3.1 Masses of Compounds in the HP Matrix in Positive Mode ....................................44 Table 3.2 Isotopic Masses and Relative Abundance for Ferrioxamine A1 and A2 ................47 Table 3.3 Isotopic Masses and Relative Abundance for Ferrioxamine B (DFOB +Fe(III)) ...49 Table 3.4 Isotopic Masses and Relative Abundance for Ferrioxamine X1 .............................51 Table 3.5 Isotopic Masses and Relative Abundance for Agrobactin ......................................53 Table 4.1 Species to Consider in IMAC Elution .....................................................................65 vi LIST OF FIGURES Figure 1.1 A. Nitrate concentrations in the surface ocean ranging from very low in the central gyres to >35µM nitrate in the Southern Ocean. B. Chlorophyll data for the surface . ocean ranging from 0.01 to >10µg/L. Elevated nitrate concentrations in the Southern Ocean, along the equator, and in the sub-Arctic northeastern Pacific are associated with relatively low chlorophyll concentrations: these regions are referred to as HNLC regions (Martin and Fitzwater) ...........................................................................................................................10 Figure 1.2 Iron is required for these steps in the marine nitrogen cycle: oxidation (red), nitrification (blue), denitrification (yellow), and nitrogen fixation (green) (Morel and Price) ...............................................................................................................11 Figure 1.3 Vertical profiles for Nitrate and iron from three different curse initiatives: USJGOFS (NABE), VERTEX (VII), and FeLine (FeL) (Johnson, Gordon, and Coale). These profiles demonstrate nutrient behavior with the most obvious seen with the VERTEX cruise data .....................................................................................................................................12 Figure 1.4 The iron(III) cellular uptake strategy for both low and high-affinity iron acquisition mechanisms. Exocellular Fe(III) reduction (1) is followed by Fe(II) transport through the cell wall (2), re-oxidation to Fe(III) (3) and transport of Fe(III) into the cytoplasm (4) ..........13 Figure 1.5 A. a tricatechol structure 1,3,5-N,N', N"-tris-(2,3- dihydroxybenzoyl)triaminomethylbenzene (MECAM). B. a hydroxyamate structure desferrioxamine B (Hider, 1984) .......................................................................................13 Figure 2.1 This box diagram shows the processes that occur on the Chelex-100 resin. The first panel shows that Chelex-100 resin is derivatized with imidodiacetate (IDA) groups. The second panel refers to when the Chelex-100 resin is loaded with Fe(III). The next panel illustrates the goal of capturing the ligands that have high affinity for Fe(III) on the resin. The final panel shows the EDTA competing with the natural ligands bound to Fe(III) on the Chelex-100 resin and subsequently eluting the ligands. ....................................................28 Figure 2.2 This box diagram shows the process used to separate iron binding organics from seawater..............................................................................................................................28 Figure 2.3 (+) ESI-TOFMS spectrum of a standard solution extracted
Recommended publications
  • Fundamentals of Biological Mass Spectrometry and Proteomics
    Fundamentals of Biological Mass Spectrometry and Proteomics Steve Carr Broad Institute of MIT and Harvard Modern Mass Spectrometer (MS) Systems Orbitrap Q-Exactive Triple Quadrupole Discovery/Global Experiments Targeted MS MS systems used for proteomics have 4 tasks: • Create ions from analyte molecules • Separate the ions based on charge and mass • Detect ions and determine their mass-to-charge • Select and fragment ions of interest to provide structural information (MS/MS) Electrospray MS: ease of coupling to liquid-based separation methods has made it the key technology in proteomics Possible Sample Inlets Syringe Pump Sample Injection Loop Liquid Autosampler, HPLC Capillary Electrophoresis Expansion of the Ion Formation and Sampling Regions Nitrogen Drying Gas Electrospray Atmosphere Vacuum Needle 3- 5 kV Liquid Nebulizing Gas Droplets Ions Containing Solvated Ions Isotopes Most elements have more than one stable isotope. For example, most carbon atoms have a mass of 12 Da, but in nature, 1.1% of C atoms have an extra neutron, making their mass 13 Da. Why do we care? Mass spectrometers “see” the isotope peaks provided the resolution is high enough. If an MS instrument has resolution high enough to resolve these isotopes, better mass accuracy is achieved. Stable isotopes of most abundant elements of peptides Element Mass Abundance H 1.0078 99.985% 2.0141 0.015 C 12.0000 98.89 13.0034 1.11 N 14.0031 99.64 15.0001 0.36 O 15.9949 99.76 16.9991 0.04 17.9992 0.20 Monoisotopic mass and isotopes We use instruments that resolve the isotopes enabling us to accurately measure the monoisotopic mass MonoisotopicMonoisotopic mass; all 12C, mass no 13C atoms corresponds to 13 lowestOne massC atom peak Two 13C atoms Angiotensin I (MW = 1295.6) (M+H)+ = C62 H90 N17 O14 TheWhen monoisotopic the isotopes mass of aare molecule clearly is the resolved sum of the the accurate monoisotopic masses for the massmost abundant isotope of each element present.
    [Show full text]
  • Appendix the Meaning and Usage of the Terms Monoisotopic Mass
    MASS SPECTROMETRY IN BIOLOGY AND MEDICINE Appendix The Meaning and Usage of the Terms Monoisotopic Mass, Average Mass, Mass Resolution, and Mass Accuracy for Measurements of Biomolecules s. A. Carr, A. L. Burlingame and M. A. Baldwin Much confusion surrounds the meaning of the terms monoisotopic mass, average mass, resolution and mass accuracy in mass spectrometry, and how they interrelate. The following brief primer is intended to clarify these terms and to illustrate the effect they have on the data obtained and its interpretation. We have highlighted the effects of these parameters on measurements of masses spanning the range of 1000 to 25,000 Da because of important differences that are observed. We refer the interested reader to a number ofexcellent articles that have dealt with aspects ofthese issues [1-6]. MONOISOTOPIC MASS VERSUS AVERAGE MASS Most elements have a variety of naturally occurring isotopes, each with a unique mass and natural abundance. The monoisotopic mass of an element refers specifically to the lightest stable isotope of that element. For example, there are two principle isotopes of carbon, l2C and l3C, with masses of 12.000000 and 13.003355 and natural abundances of98.9 and 1.1%, respectively; thus the value defined for the monoisotopic mass of carbon is 12.00000 on this mass scale. Similarly, there are two naturally occurring isotopes for nitrogen, l4N, with a mass of 14.003074 (monoisotopic mass) and a relative abundance of99.6% and l5N, with a mass of 15.000109 and a relative abundance of ca. 0.4%. The monoisotopic mass of a molecule is thus obtained by summing the monoisotopic masses (including the decimal component, referred to as the mass defect) of each element present.
    [Show full text]
  • Cytochrome C, Fe(III)Cytochrome B5, and Fe(III)Cytochrome B5 L47R
    CORE Metadata, citation and similar papers at core.ac.uk Provided by Elsevier - Publisher Connector Unequivocal Determination of Metal Atom Oxidation State in Naked Heme Proteins: Fe(III)Myoglobin, Fe(III)Cytochrome c, Fe(III)Cytochrome b5, and Fe(III)Cytochrome b5 L47R Fei He, Christopher L. Hendrickson, and Alan G. Marshall Center for Interdisciplinary Magnetic Resonance, National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida, USA Unambiguous determination of metal atom oxidation state in an intact metalloprotein is achieved by matching experimental (electrospray ionization 9.4 tesla Fourier transform ion cyclotron resonance) and theoretical isotopic abundance mass distributions for one or more holoprotein charge states. The iron atom oxidation state is determined unequivocally as Fe(III) for each of four gas-phase unhydrated heme proteins electrosprayed from H2O: myoglobin, cytochrome c, cytochrome b5, and cytochrome b5 L47R (i.e., the solution-phase oxidation state is conserved following electrospray to produce gas-phase ions). However, the same Fe(III) oxidation state in all four heme proteins is observed after prior reduction by sodium dithionite to produce Fe(II) heme proteins in solution: thus proving that oxygen was present during the electrospray process. Those results bear directly on the issue of similarity (or lack thereof) of solution-phase and gas-phase protein conformations. Finally, infrared multiphoton irradiation of the gas-phase Fe(III)holoproteins releases Fe(III)heme from each of
    [Show full text]
  • Determination of Monoisotopic Masses and Ion Populations for Large Biomolecules from Resolved Isotopic Distributions
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Elsevier - Publisher Connector Determination of Monoisotopic Masses and Ion Populations for Large Biomolecules from Resolved Isotopic Distributions Michael W. Senko,* Steven C. Beu,? and Fred W. McLafferty Department of Chemistry, Cornell University, Ithaca, New York, USA The coupling of electrospray ionization with Fourier-transform mass spectrometry allows the analysis of large biomolecules with mass-measuring errors of less than 1 ppm. The large number of atoms incorporated in these molecules results in a low probability for the all-monoisotopic species. This produces the potential to misassign the number of heavy isotopes in a specific peak and make a mass error of f 1 Da, although the certainty of the measurement beyond the decimal place is greater than 0.1 Da. Statistical tests are used to compare the measured isotopic distribution with the distribution for a model molecule of the same average molecular mass, which allows the assignment of the monoisotopic mass, even in cases where the monoisotopic peak is absent from the spectrum. The statistical test produces error levels that are inversely proportional to the number of molecules in a distribution, which allows an estimation of the number of ions in the trapped ion cell. It has been determined, via this method that 128 charges are required to produce a signal-to-noise ratio of 3:1, which correlates well with previous experimental methods. (1 Am Sot Moss Spectrom 1995, 6, 229-233) ecent advances in ionization techniques like variability is no longer a limitation because only electrospray ionization (ES11 [l-4] and matrix- the abundances, and not the positions of the isotopic n ssisted laser desorption-ionization (MALDI) peaks, will change.
    [Show full text]
  • Rdisop: Decomposition of Isotopic Patterns
    Package ‘Rdisop’ September 30, 2021 Title Decomposition of Isotopic Patterns Version 1.53.0 Date 2019-05-02 Author Anton Pervukhin <[email protected]>, Steffen Neu- mann <[email protected]> Maintainer Steffen Neumann <[email protected]> Description Identification of metabolites using high precision mass spectrometry. MS Peaks are used to derive a ranked list of sum formulae, alternatively for a given sum formula the theoretical isotope distribution can be calculated to search in MS peak lists. Depends R (>= 2.0.0), Rcpp LinkingTo Rcpp Suggests RUnit SystemRequirements None License GPL-2 StagedInstalll no URL https://github.com/sneumann/Rdisop BugReports https://github.com/sneumann/Rdisop/issues/new biocViews ImmunoOncology, MassSpectrometry, Metabolomics git_url https://git.bioconductor.org/packages/Rdisop git_branch master git_last_commit ba78a7f git_last_commit_date 2021-05-19 Date/Publication 2021-09-30 1 2 addMolecules R topics documented: addMolecules . .2 decomposeIsotopes . .3 getMolecule . .4 initializeCHNOPS . .6 Index 8 addMolecules Add/subtract sum formulae Description Simple arithmetic modifications of sum formulae. Usage addMolecules(formula1, formula2, elements = NULL, maxisotopes = 10) subMolecules(formula1, formula2, elements = NULL, maxisotopes = 10) Arguments formula1 Sum formula formula2 Sum formula elements list of allowed chemical elements, defaults to full periodic system of elements maxisotopes maximum number of isotopes shown in the resulting molecules Details addMolecules() adds the second argument
    [Show full text]
  • Isotope Distributions
    Isotope distributions This exposition is based on: • R. Martin Smith: Understanding Mass Spectra. A Basic Approach. Wiley, 2nd edition 2004. [S04] • Exact masses and isotopic abundances can be found for example at http: //www.sisweb.com/referenc/source/exactmaa.htm or http://education. expasy.org/student_projects/isotopident/htdocs/motza.html • IUPAC Compendium of Chemical Terminology - the Gold Book. http:// goldbook.iupac.org/ [GoldBook] • Sebastian Bocker,¨ Zzuzsanna Liptak:´ Efficient Mass Decomposition. ACM Symposium on Applied Computing, 2005. [BL05] • Christian Huber, lectures given at Saarland University, 2005. [H05] • Wikipedia: http://en.wikipedia.org/, http://de.wikipedia.org/ 10000 Isotopes This lecture addresses some more combinatorial aspect of mass spectrometry re- lated to isotope distributions and mass decomposition. Most elements occur in nature as a mixture of isotopes. Isotopes are atom species of the same chemical element that have different masses. They have the same number of protons and electrons, but a different number of neutrons. The main ele- ments occurring in proteins are CHNOPS. A list of their naturally occurring isotopes is given below. Isotope Mass [Da] % Abundance Isotope Mass [Da] % Abundance 1H 1.007825 99.985 16O 15.994915 99.76 2H 2.014102 0.015 17O 16.999131 0.038 18O 17.999159 0.20 12C 12. (exact) 98.90 13C 13.003355 1.10 31P 30.973763 100. 14N 14.003074 99.63 32S 31.972072 95.02 15N 15.000109 0.37 33S 32.971459 0.75 34S 33.967868 4.21 10001 Isotopes (2) Note that the lightest isotope is also the most abundant one for these elements.
    [Show full text]
  • Mass Spectrometry
    1/25/2017 Mass Spectrometry Introduction to Mass Spectrometry At the most fundamental level, matter is characterized by two quantities: FREQUENCY AND MASS. Measuring: (1) the frequencies of emitted, absorbed, and diffracted electromagnetic radiation and (2) the masses of intact particles & pieces of fragmented particles are the principal means by which we can investigate the structural features of atoms and molecules. 1 1/25/2017 Introduction to Mass Spectrometry At the most fundamental level, matter is characterized by two quantities: FREQUENCY AND MASS. Measuring: (1) the frequencies of emitted, absorbed, and diffracted electromagnetic radiation and (2) the masses of intact particles & pieces of fragmented particles are the principal means by which we can investigate the structural features of atoms and molecules. Mass Spectrometry Mass spectrometry refers to that branch of analytical science devoted to: 1) developing and using instruments to determine the masses of atoms and molecules 2) Deducing the identities or abundances of atoms in physical and biological samples, and 3) elucidating the structural properties or deducing the identities, or determining the concentrations of molecules in physical/biological samples. 2 1/25/2017 2: Mass Analysis •Sorting and counting •Pocket change (mixture of coins) •Penny, dime, nickel, quarter, half $ •Sorting change by value or size •Concept of visual interpretation Quantity (Abundance) Quantity dime penny nickel quarter half $ Value (m/z) 2: Mass Analysis •Sorting and counting •Pocket change (mixture of coins) •Mixture of molecules •Penny, dime, nickel, quarter, half $ •Molecules of different weight, size •Sorting change by value or size •Separation by mass spectrum •Concept of visual interpretation 8 5 4 3 2 Quantity (Abundance) Quantity dime penny nickel quarter half $ Value (m/z) "What is Mass Spectrometry?" D.H.
    [Show full text]
  • Utilizing a Hybrid Mass Spectrometer to Enable Fundamental Protein Characterization: Intact Mass Analysis and Top-Down Fragmentation with the LTQ Orbitrap MS
    Application Note: 498 Utilizing a Hybrid Mass Spectrometer to Enable Fundamental Protein Characterization: Intact Mass Analysis and Top-Down Fragmentation with the LTQ Orbitrap MS Tonya Pekar Second, Vlad Zabrouskov, Thermo Fisher Scientific, San Jose, CA, USA Alexander Makarov, Thermo Fisher Scientific, Bremen, Germany Introduction Experimental Key Words A fundamental stage in protein characterization is to Protein standards, including bovine carbonic anhydrase, • LTQ Orbitrap Velos determine and verify the intact state of the macromolecule. yeast enolase, bovine transferrin and human monoclonal This is often accomplished through the use of mass IgG, were purchased from Sigma-Aldrich. For direct • LTQ Orbitrap XL spectrometry (MS) to first detect and measure the molecular infusion, proteins in solution were purified by either a • Applied mass. Beyond confirmation of intact mass, the next objective Thermo Scientific Vivaspin centrifugal spin column or a Fragmentation is the verification of its primary structure, the amino acid size-exclusion column (GE Healthcare), employing at least Techniques sequence of the protein. Traditionally, a map of the two rounds of buffer exchange into 10 mM ammonium macromolecule is reconstructed from matching masses of acetate. Protein solutions were at a concentration of least • Electron Transfer peptide fragments produced through external enzymatic 1 mg/mL prior to clean-up. Samples were diluted into Dissociation ETD digestion of the protein to masses calculated from an in 50:50:0.1 acetonitrile:water:formic acid prior to infusion silico • Top-Down digest of the target protein sequence. A more direct into the mass spectrometer. Instrument parameters were approach involves top-down MS/MS of the intact protein altered during infusion of protein solutions to optimize the Proteomics molecular ion.
    [Show full text]
  • Site-Specific Characterization of Endogenous Sumoylation Across
    ARTICLE DOI: 10.1038/s41467-018-04957-4 OPEN Site-specific characterization of endogenous SUMOylation across species and organs Ivo A. Hendriks 1, David Lyon 2, Dan Su3, Niels H. Skotte1, Jeremy A. Daniel3, Lars J. Jensen2 & Michael L. Nielsen 1 Small ubiquitin-like modifiers (SUMOs) are post-translational modifications that play crucial roles in most cellular processes. While methods exist to study exogenous SUMOylation, 1234567890():,; large-scale characterization of endogenous SUMO2/3 has remained technically daunting. Here, we describe a proteomics approach facilitating system-wide and in vivo identification of lysines modified by endogenous and native SUMO2. Using a peptide-level immunoprecipi- tation enrichment strategy, we identify 14,869 endogenous SUMO2/3 sites in human cells during heat stress and proteasomal inhibition, and quantitatively map 1963 SUMO sites across eight mouse tissues. Characterization of the SUMO equilibrium highlights striking differences in SUMO metabolism between cultured cancer cells and normal tissues. Tar- geting preferences of SUMO2/3 vary across different organ types, coinciding with markedly differential SUMOylation states of all enzymes involved in the SUMO conjugation cascade. Collectively, our systemic investigation details the SUMOylation architecture across species and organs and provides a resource of endogenous SUMOylation sites on factors important in organ-specific functions. 1 Proteomics Program, Novo Nordisk Foundation Center for Protein Research, Faculty of Health and Medical Sciences, University of Copenhagen, Blegdamsvej 3B, 2200 Copenhagen, Denmark. 2 Disease Systems Biology Program, Novo Nordisk Foundation Center for Protein Research, Faculty of Health and Medical Sciences, University of Copenhagen, Blegdamsvej 3B, 2200 Copenhagen, Denmark. 3 Protein Signaling Program, Novo Nordisk Foundation Center for Protein Research, Faculty of Health and Medical Sciences, University of Copenhagen, Blegdamsvej 3B, 2200 Copenhagen, Denmark.
    [Show full text]
  • Mass Spectrometry and Proteomics
    Mass Spectrometry and Proteomics Lecture 1 30 March, 2010 Alma L. Burlingame Department of Pharmaceutical Chemistry University of California, San Francisco [email protected] 1 Lectures: 10hrs: Course Outline 12noon-2pm Date Topic Lecture1 Tuesday, March 30 Mass Spectrometry Fundamentals: Instrumentation; ion optics, resolution and mass accuracy Lecture2 Wednesday, March 31 MS based methodology in system biology proteomics - sample preparation gel- based/LC mehods - topdown/bottom up Microfluidics and MS Lecture3 Tuesday, April 6 Posttranslational modifications phosphorylation glycosylation/O-GlcNAc ubiquitination methylation/acetylation - histones cross-linking/other chemical biology methods. Lecture4 Friday, April 9 Infomatics for MS preprocessing - deisotoping simulated spectra/spectral libraries database search engines denovo sequencing algorithms Lecture5 Tuesday, April 13 Quantification chemical/metabolic labeling label free H/D exchange/protein turnover 2 What is Mass Spectrometry? IUPAC Definition: The branch of science dealing with all aspects of mass spectro meters and the results obtained with these instruments. My Definition: An analytical instrument that measures the mass-to-charge ratio of charged particles. Applications: 1. identification 2. Quantification 3. Molecular structure 4. higher-order structure (H/D exchange, cross-link) 5. gas-phase ion chemistry 6. tissue imaging 3 What do we use Mass Spectrometry for in this course? 1. Protein identification, either by direct protein analysis, or by digesting the protein into smaller pieces (peptides), then identifying the peptides. • Complex mixture; e.g. cell organelle • Immunoprecipitation of protein of interest • ID binding partners 2. Identification of post-translational modifications:e.g. phosphorylation, acetylation. 3. Quantifying relative differences in protein/peptide levels between related samples. 4. Quantifying changes in post-translational modifications.
    [Show full text]
  • Molecular Determination of Marine Iron Ligands by Mass Spectrometry
    MOLECULAR DETERMINATION OF MARINE IRON LIGANDS BY MASS SPECTROMETRY By Rene M. Boiteau B.A., Northwestern University (2009) MPhil., University of Cambridge (2010) Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY and the WOODS HOLE OCEANOGRAPHIC INSTITUTION February 2016 © 2016 Rene Boiteau All rights reserved. The author hereby grants to MIT and WHOI permission to reproduce and to distribute publicly paper and electronic copies of this thesis document in whole or in part in any medium now known or hereafter created. Signature of Author: ______________________________________________________________________________ Joint Program in Oceanography Massachusetts Institute of Technology and Woods Hole Oceanographic Institution (January 19, 2016) Certified by: ______________________________________________________________________________ Daniel J. Repeta Thesis Supervisor Accepted by: ______________________________________________________________________________ Elizabeth B. Kujawinski Chair, Joint Committee for Chemical Oceanography Woods Hole Oceanographic Institution 2 Abstract: Marine microbes produce a wide variety of metal binding organic ligands that regulate the solubility and availability of biologically important metals such as iron, copper, cobalt, and zinc. In marine environments where the availability of iron limits microbial growth and carbon fixation rates, the ability to access organically bound iron confers a competitive advantage. Thus, the compounds that microbes produced to acquire iron play an important role in biogeochemical carbon and metal cycling. However, the source, abundance, and identity of these compounds are poorly understood. To investigate these processes, sensitive methodologies were developed to gain a compound-specific window into marine iron speciation by combining trace metal clean sample collection and chromatography with inductively coupled plasma mass spectrometry (LC- ICPMS) and electrospray ionization mass spectrometry (LC-ESIMS).
    [Show full text]
  • In-Depth AGE and ALE Profiling of Human Albumin in Heart Failure: Ex Vivo Studies
    antioxidants Article In-Depth AGE and ALE Profiling of Human Albumin in Heart Failure: Ex Vivo Studies Alessandra Altomare 1,*,† , Giovanna Baron 1,† , Marta Balbinot 1, Alessandro Pedretti 1 , Beatrice Zoanni 2, Maura Brioschi 2, Piergiuseppe Agostoni 2,3, Marina Carini 1, Cristina Banfi 2 and Giancarlo Aldini 1 1 Department of Pharmaceutical Sciences (DISFARM), Università degli Studi di Milano, Via Mangiagalli 25, 20133 Milan, Italy; [email protected] (G.B.); [email protected] (M.B.); [email protected] (A.P.); [email protected] (M.C.); [email protected] (G.A.) 2 Centro Cardiologico Monzino, IRCCS, Via Parea 4, 20138 Milan, Italy; [email protected] (B.Z.); [email protected] (M.B.); [email protected] (P.A.); cristina.banfi@cardiologicomonzino.it (C.B.) 3 Dipartimento di Scienze Cliniche e di Comunità, Sezione Cardiovascolare, Università degli Studi di Milano, Via Festa del Perdono 7, 20122 Milan, Italy * Correspondence: [email protected] † These Authors equally contributed to the work. Abstract: Advanced glycation end-products (AGEs) and advanced lipoxidation end-products (ALEs), particularly carboxymethyl-lysine (CML), have been largely proposed as factors involved in the establishment and progression of heart failure (HF). Despite this evidence, the current literature lacks the comprehensive identification and characterization of the plasma AGEs/ALEs involved in HF (untargeted approach). This work provides the first ex vivo high-resolution mass spectrometry Citation: Altomare, A.; Baron, G.; (HR-MS) profiling of AGEs/ALEs occurring in human serum albumin (HSA), the most abundant Balbinot, M.; Pedretti, A.; Zoanni, B.; protein in plasma, characterized by several nucleophilic sites and thus representing the main protein Brioschi, M.; Agostoni, P.; Carini, M.; substrate for AGE/ALE formation.
    [Show full text]