DOCSLIB.ORG

Probabilistic Amplitude Shaping for a 64-QAM OFDM W-Band Rof System

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Probabilistic Amplitude Shaping for a 64-QAM OFDM W-Band Rof System Probabilistic amplitude shaping for a 64-QAM OFDM W-band RoF system Citation for published version (APA): Wu, K., He, J., Zhou, Z., & Shi, J. (2019). Probabilistic amplitude shaping for a 64-QAM OFDM W-band RoF system. IEEE Photonics Technology Letters, 31(13), 1076 - 1079. [8718998]. https://doi.org/10.1109/LPT.2019.2917925 DOI: 10.1109/LPT.2019.2917925 Document status and date: Published: 01/07/2019 Document Version: Accepted manuscript including changes made at the peer-review stage Please check the document version of this publication: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license above, please follow below link for the End User Agreement: www.tue.nl/taverne Take down policy If you believe that this document breaches copyright please contact us at: [email protected] providing details and we will investigate your claim. Download date: 29. Sep. 2021 PTL-35788-2019.R1 1 Probabilistic Amplitude Shaping for a 64-QAM OFDM W-band RoF System Kaiquan Wu, Jing He, Zhihua Zhou, and Jin Shi resilience and finer capacity granularity. Abstract—In the paper, probabilistic amplitude shaping (PAS) PAS has been investigated in single-carrier transmission [7, is performed in the case of orthogonal frequency division 8]. However, in the scenario of multi-carrier transmission such multiplexing (OFDM) by combining with orthogonal circulant as OFDM, the PAS implementation faces a challenge of matrix transform (OCT) precoding. Thanks to the precoding adaptivity. Since the optimal probabilistic distribution is method, one optimized probabilistic distribution is globally implemented across 240 subcarriers by merely one distribution channel-dependent, frequency selective fading (mainly caused matcher (DM). The proposed probabilistic shaping scheme for by limited device bandwidth) leads to various subcarrier signal- OFDM is experimentally demonstrated in a 64-ary quadrature to-noise ratios (SNRs). One optimal approach is bit-loading that amplitude modulation (QAM) W-band radio-over-fiber (RoF) treats each subcarrier separately [9]. It requires multiple DMs, system using direct-detection (DD), with 20-km single-mode fiber modulation formats and an additional uplink. Alternatively, in (SMF) and 0.5-m free-space transmission. Experimental results order to implement a global probabilistic distribution, the show that compared to the uniform 64-QAM, there is 1.07 dB shaping gain for system sensitivity at BER of 10-4. Meanwhile, it subcarriers uniformity must be realized. This can be achieved inherits the advantage of flexible capacity granularity from the by the precoding methods such as orthogonal circulant matrix conventional single-carrier PAS. transform (OCT) precoding [10]. Ideally, only one DM and one modulation format are required in this case, which significantly Index Terms—probabilistic amplitude shaping, OFDM, QAM, reduces the complexity. However, the concatenation of the millimeter wave, radio over fiber communication. precoding method and PAS for OFDM has seldom been studied. In this paper, PAS combined with OCT precoding is I. INTRODUCTION proposed and experimentally demonstrated in a 64-QAM he W-band (75~110 GHz) microwave signal exhibits OFDM W-band RoF system. OCT precoding is used to equalize T advantages of precise directionality and low atmospheric subcarrier noises so that all data subcarriers can be treated attenuation, while radio-over-fiber (RoF) systems possess equally by one DM with an optimized probabilistic distribution. abundant bandwidth, low transmission loss, and high mobility. Moreover, when probabilistic shaping is used in the OFDM, we Hence, RoF systems exploiting the W-band can expand the analyze that the bit-level achievable information rate (AIR) transmission reach and capacity of wireless data service [1]. cannot reflect the gain brought by OCT precoding. The Faced with increasing demands for high-bandwidth services, experimental results show that the OCT-based single-carrier higher-order modulation format, frequency division PAS implementation grants the system with capacity multiplexing, and constellation shaping are the enabling granularity, flexibility and shaping gain. technologies for the next-generation optical communication [2]. In the W-band RoF system with limited receiver bandwidth, II. PRINCIPLES orthogonal frequency division multiplexing (OFDM) is superior to single-carrier transmission [3]. In [4], a two dual- A. PAS for Single-Carrier QAM Transmission subcarrier D-band wireless system using 64-ary quadrature The rectangular 22m-QAM constellation can be divided into amplitude modulation (QAM) can reach the data rate up to 1 two independent 2m-pulse amplitude modulation (PAM) Tb/s with the help of constellation shaping. In a word, OFDM constellations. We define the symbol set of each PAM with a large number of subcarriers is crucial for high spectral constellation as χ { AA1 , , 2m1 }, and the amplitude AA1m 1 efficiency, while constellation shaping improves the system probability distribution as P PP,,. 2 Obviously, in the robustness against noises given the transmit power budget. case of unshaped uniform QAM, each symbol is chosen and Probabilistic amplitude shaping (PAS) is the state-of-art transmitted with equiprobability. Thus, its probability (m 1) m 1 coded modulation scheme. It can offer the maximum shaping distribution is P PAi 2 ,( i 1, ,2 ) . Given the gain of 1.53 dB that approaches the Shannon limit [5]. Its key employed FEC with code rate RC, the total information rate is elements are a systematic forward error correction (FEC) and a RUNI 2 mR C . By contrast, with the help of DM, PAS assigns distribution matcher (DM) [6]. By employing a carefully the optimized P PAi to amplitudes Ai . The amount of bit designed input probability distribution according to the channel information contained per amplitude in the DM’s output state information (CSI), it provides the system with better noise amplitude sequence is the rate of DM, namely RDM. Regarding the design of P, the Maxwell-Boltzmann (MB) distribution is a This work was supported in part by National Natural Science Foundation of The authors are with College of Computer Science and Electronic China (NSFC) (61775054) and Science and Technology Project of Hunan Engineering, Hunan University, Changsha, China, 410082 (corresponding Province (2016GK2011). author: Jing He, e-mail: [email protected]). PTL-35788-2019.R1 2 TABLE I SNR GAPS TO AWGN SHANNON LIMIT AND SHAPING GAIN OF PPP1,, 2 3 SHAPED-64-QAM (BIT-LEVEL AIR) Rate Shannon Limit Uniform SNR Gap Shaped SNR Gap Gain [bits/symbol] [dB] [dB] [dB] [dB] [dB] [dB] 16-QAM 9.3129 0.8619 P1 Shaped 0.8333 3.0 8.4510 8.4796 0.0286 64-QAM 9.4345 0.9835 64-QAM 0.9549 16-QAM 12.1212 1.6579 P2 Shaped 1.6026 3.6 10.4633 10.5186 0.0553 64-QAM 11.4268 0.9635 64-QAM 0.9082 P3 Shaped 4.0 11.7609 64-QAM 12.7070 0.9641 11.8954 0.1345 0.8296 64-QAM TABLE II FIXED PROBABILITY DISTRIBUTIONS OF 64-QAM ( m 3 ) Parameters P1 P2 P3 Optimized SNR [dB] 6.50 10.70 13.65 1-D Probability Distribution PA1 0.6254 0.5178 0.4371 0.2988 0.3241 0.3210 PA 2 0.0683 0.1270 0.1732 PA 3 0.0075 0.0311 0.0687 P A4 H(P) [bit] 1.2613 1.5523 1.7516 probability distribution P, the channel SNR as well as the labeling rules. Since the adopted 1-D labeling rule is Gray Fig. 1. Bit-level AIR of shaped and uniform QAM over AWGN channel. labeling, it can be represented as AIR = f(χ,P , SNR ) (3) common choice for the additive white Gaussian noise (AWGN) bit channel [5]. The total information rate of PAS-shaped QAM The AIR of 2-D QAM is the sum of AIRs of its divided 1-D PAMs. Fig.1 presents the bit-level AIRs for QAM vs. SNRs in signal is RPAS2 R DM 1 m (1 R C ) . different cases of χ,P . For the channel-dependent shaped 64- B. Bit-Level AIR QAM, the input P is always optimized at the current operating PAS adopts a FEC bit-metric decoder at the receiver. In the point. Hence, it yields the performance near the Shannon limit. case of single-carrier transmission, the bit-level AIR is a good In addition, the MB distributions P1/P2/P3 are employed in the tool to predict the maximum amount of information that can be paper, which are optimized at 6.50/10.70/13.65 dB respectively. recovered by the ideal bit-metric decoding [5, 8]. Table I displays the shaping gains of P1/P2/P3, and Table II For the calculation of the bit-level AIR, considering there are summarizes their parameters.
Load more

Recommended publications
  • V.34 Transmitter and Receiver Implementation on the TMS320C50 DSP Application Report
    V.34 Transmitter and Receiver Implementation on the TMS320C50 DSP Application Report 1997 Digital Signal Processing Solutions Printed in U.S.A., June 1997 SPRA159 V.34 Transmitter and Receiver Implementation on the TMS320C50 DSP Dr. Steven A. Tretter, Faculty Advisor Christopher J. Buehler, Jonas Keating, Hayden Metz, Carl J. Nuzman, and Hemanth Sampath University of Maryland, Department of Electrical Engineering This application report consists of one of the entries in a contest, The 1995 TI DSP Solutions Challenge. The report was designed, prepared, and tested by university students who are not employees of, or otherwise associated with, Texas Instruments. The user is solely responsible for verifying this application prior to implementation or use in products or systems. SPRA159 June 1997 Printed on Recycled Paper IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.
    [Show full text]
  • Special Issue on Optical Communications and Networking: Prospects in Industrial Applications
    applied sciences Editorial Special Issue on Optical Communications and Networking: Prospects in Industrial Applications Zhongqi Pan 1, Qiang Wang 2, Yang Yue 3,*, Hao Huang 4 and Changjing Bao 5 1 Department of Electrical and Computer Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA; [email protected] 2 Nokia Corporation, Mountain View, CA 94043, USA; [email protected] 3 Institute of Modern Optics, Nankai University, Tianjin 300350, China 4 Lumentum Operations LLC, San Jose, CA 95131, USA; [email protected] 5 Nokia Corporation, Murray Hill, NJ 07974, USA; [email protected] * Correspondence: [email protected] Received: 18 December 2019; Accepted: 25 December 2019; Published: 6 January 2020 1. Introduction In the past two decades, Internet traffic has increased by over 10,000 times by taking advantage of both efficient information processing technology in the electronic domain and efficient transmission technology in the optical domain, which are the foundation of today’s Internet infrastructure [1,2]. The advancement of electronics processing circuits has followed Moore’s law, and perhaps will continue this exponential growth for years to come. This may make the electrical systems significantly outpace the advancement of optical systems in information and communications technologies. To support the ever-growing Internet traffic, optical communication systems face a great challenge in transporting information processed by electronic systems for sustained exponential growth. The industry has explored multiple degrees of freedom of the photon (time, wavelength, amplitude, phase, polarization, and space) to significantly reduce the cost/bit for data transmission by increasing the capacity/fiber through multiplexing and reducing the size and power through integration.
    [Show full text]
  • Coded Modulation and Impairment Compensation Techniques in Optical Fiber Communication Zhipei Li, Dong Guo and Ran Gao
    Chapter Coded Modulation and Impairment Compensation Techniques in Optical Fiber Communication Zhipei Li, Dong Guo and Ran Gao Abstract This chapter deals with coded modulation and impairment compensation tech- niques in optical fiber communication. Probabilistic shaping is a new coded modu- lation technology, which can reduce transmission power by precoding, reduce bit error rate and improve communication rate. We proposed a probabilistic shaping 16QAM modulation scheme based on trellis coded modulation. Experimental results show that this scheme can achieve better optical SNR gain and BER performance. On the other hand, in order to meet the demand of transmission rate of next generation high speed optical communication systems, multi-dimensional modula- tion and coherent detection are sufficiently applied. The imperfect characteristics of optoelectronic devices and fiber link bring serious impairments to the high baud- rate and high order modulation format signal, causes of performance impairment are analyzed, pre-compensation and receiver side’s DSP techniques designed for coherent systems are introduced. Keywords: Coherent Optical Communication, Coded Modulation, Probabilistic Shaping, Digital Signal Processing, Pre-Compensation, Quadrature Amplitude Modulation 1. Introduction With the rapid development of Internet services, higher requirements are put forward for the transmission rate, system capacity and stability of communication. Optical fiber communication has become one of the main communication methods in the world because of its large transmission bandwidth, long-distance transmission and strong anti-interference ability. The optical fiber communication systems are mainly divided into two types: intensity modulation-direct detection (IM-DD) and coherent optical communica- tion systems. The IM-DD system is mainly used in access networks, passive optical networks (PON) and data centers, and its transmission distance is usually less than 80 km.
    [Show full text]
  • Exploring and Experimenting with Shaping Designs for Next-Generation Optical Communications Fanny Jardel, Tobias A
    SUBMITTED TO JOURNAL OF LIGHTWAVE TECHNOLOGY 1 Exploring and Experimenting with Shaping Designs for Next-Generation Optical Communications Fanny Jardel, Tobias A. Eriksson, Cyril Measson,´ Amirhossein Ghazisaeidi, Fred Buchali, Wilfried Idler, and Joseph J. Boutros Abstract—A class of circular 64-QAM that combines ‘geo- randomized schemes rose in the late 90s after the rediscovery metric’ and ‘probabilistic’ shaping aspects is presented. It is of probabilistic decoding [18], [19]. Multilevel schemes such compared to square 64-QAM in back-to-back, single-channel, as bit-interleaved coded modulation [20] offer flexible and and WDM transmission experiments. First, for the linear AWGN channel model, it permits to operate close to the Shannon low-complexity solutions [21], [22]. In the 2000s, several limits for a wide range of signal-to-noise ratios. Second, WDM schemes have been investigated or proved to achieve the simulations over several hundreds of kilometers show that the fundamental communication limits in different scenarios as obtained signal-to-noise ratios are equivalent to – or slightly ex- discussed in [23]–[27]. ceed – those of probabilistic shaped 64-QAM. Third, for real-life In the last years, practice-oriented works related to op- validation purpose, an experimental comparison with unshaped 64-QAM is performed where 28% distance gains are recorded tical transmissions have successfully implemented different when using 19 channels at 54.2 GBd. This again is in line – or shaping methods, from many-to-one and geometrically-shaped slightly exceeds – the gains generally obtained with probabilistic formats to non-uniform signaling. The latter, more often called shaping. Depending upon implementation requirements (core probabilistic shaping in the optical community [28]–[32], has forward-error correcting scheme for example), the investigated perhaps received most attention.
    [Show full text]
  • Constellation Shaping for Fiber-Optic Channels with QAM and High Spectral Efficiency
    Downloaded from orbit.dtu.dk on: Sep 27, 2021 Constellation Shaping for Fiber-optic Channels with QAM and High Spectral Efficiency Yankov, Metodi Plamenov; Zibar, Darko; Larsen, Knud J.; Christensen, Lars P. B.; Forchhammer, Søren Published in: IEEE photonic Technology Letters Link to article, DOI: 10.1109/LPT.2014.2358274 Publication date: 2014 Document Version Peer reviewed version Link back to DTU Orbit Citation (APA): Yankov, M. P., Zibar, D., Larsen, K. J., Christensen, L. P. B., & Forchhammer, S. (2014). Constellation Shaping for Fiber-optic Channels with QAM and High Spectral Efficiency. IEEE photonic Technology Letters, 26(23), 2407-2410. https://doi.org/10.1109/LPT.2014.2358274 General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Users may download and print one copy of any publication from the public portal for the purpose of private study or research. You may not further distribute the material or use it for any profit-making activity or commercial gain You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. This article has been accepted for publication in a future issue of this journal, but has not been fully edited. Content may change prior to final publication.
    [Show full text]
  • Design Guidelines for Spatial Modulation
    IEEE COMMUNICATION SURVEYS & TUTORIALS 1 1 Design Guidelines for Spatial Modulation 2 Ping Yang, Marco Di Renzo, Senior Member, IEEE, Yue Xiao, Shaoqian Li, Senior Member, IEEE,and 3 Lajos Hanzo, Fellow, IEEE 4 Abstract—A new class of low-complexity, yet energy-efficient [7], [8]. In order to efficiently exploit the associated grade of 38 5 Multiple-Input Multiple-Output (MIMO) transmission tech- freedom offered by MIMO channels, a meritorious transmis- 39 6 niques, namely, the family of Spatial Modulation (SM) aided sion technique should be designed to satisfy a diverse range 40 7 MIMOs (SM-MIMO), has emerged. These systems are capable of 41 8 exploiting the spatial dimensions (i.e., the antenna indices) as an of practical requirements and to strike an attractive tradeoff 9 additional dimension invoked for transmitting information, apart amongst the conflicting factors of the computational complexity 42 10 from the traditional Amplitude and Phase Modulation (APM). SM imposed, the attainable bit error ratio (BER) and the achievable 43 11 is capable of efficiently operating in diverse MIMO configurations transmission rate [9], [10]. 44 12 in the context of future communication systems. It constitutes a In the diverse family of MIMO techniques, the recently pro- 45 13 promising transmission candidate for large-scale MIMO design 46 14 and for the indoor optical wireless communication while relying posed spatial modulation (SM) [11] (which was referred to as 15 on a single-Radio Frequency (RF) chain. Moreover, SM may be Information-Guided Channel Hopping (IGCH) modulation in 47 16 also viewed as an entirely new hybrid modulation scheme, which is [12]) is particularly promising, since it is capable of exploiting 48 17 still in its infancy.
    [Show full text]
  • Constellation Shaping in Optical Communication Systems
    Thesis for the Degree of Licentiate of Engineering Constellation Shaping in Optical Communication Systems Ali Mirani Photonics Laboratory Department of Microtechnology and Nanoscience - MC2 Chalmers University of Technology Göteborg, Sweden, 2021 Constellation Shaping in Optical Communication Systems Ali Mirani Göteborg, February 2021 ©Ali Mirani, 2021 Chalmers University of Technology Microtechnology and Nanoscience - MC2 Photonics Laboratory SE-412 96 Göteborg, Sweden Phone: +46 (0) 31 772 1000 ISSN 1652-0769 Technical Report MC2-439 Printed in Sweden by Reproservice, Chalmers University of Technology Göteborg, Sweden, February 2021 Constellation Shaping in Optical Communication Systems Ali Mirani Photonics Laboratory Department of Microtechnology and Nanoscience - MC2 Chalmers University of Technology Abstract Exploiting the full-dimensional capacity of coherent optical communica- tion systems is needed to overcome the increasing bandwidth demands of the future Internet. To achieve capacity, both coding and shaping gains are required, and they are, in principle, independent. Therefore it makes sense to study shaping and how it can be achieved in various dimensions and how various shaping schemes affect the whole performance in real systems. This thesis investigates the performance of constellation shap- ing methods including geometric shaping (GS) and probabilistic shaping (PS) in coherent fiber-optic systems. To study GS, instead of considering machine learning approaches or optimization of irregular constellations in two dimensions, we have explored multidimensional lattice-based constellations. These constella- tions provide a regular structure with a fast and low-complexity encoding and decoding. In simulations, we show the possibility of transmitting and detecting constellation with a size of more than 1028 points which can be done without a look-up table to store the constellation points.
    [Show full text]
  • Constellation Shaping, Nonlinear Precoding, and Trellis Coding for Voice- Band Telephone Channel Modems
    Constellation Shaping, Nonlinear Precoding, and Trellis Coding for Voice- band Telephone Channel Modems CONSTELLATION SHAPING, NONLINEAR PRECODING, AND TRELLIS CODING FOR VOICEBAND TELEPHONE CHANNEL MODEMS with Emphasis on ITU-T Recommenda- tion V.34 STEVEN A. TRETTER Department of Electrical and Computer Engineering University of Maryland College Park, MD 20742 Kluwer Academic Publishers Boston/Dordrecht/London Contents Preface xi 1. BASICS OF LATTICE THEORY 1 1.1. Definition of a Lattice 1 1.2. Examples of Lattices 2 1.3. Sublattices. Lattice Partitions, and Cosets 7 1.4. Binary Lattices and Coset Representatives 11 1.5. Fundamental Regions and Volumes, and Voronoi Regions 15 1.5.1 Formula for the Fundamental Volume 17 1.5.2 Linear Transformations and the Fundamental Volume 18 1.5.3 Fundamental Volume of a Sublattice 18 1.6. Point Spacing, Weight Distributions, and Theta Series 19 1.7. Fundamental Coding Gain 22 2. PERFORMANCE MEASURES FOR MULTIDIMENSIONAL CONSTELLATIONS 25 2.1. Introduction 25 2.2. Constellation Figure of Merit and Symbol Error Probabilities 27 2.2.1 Normalized Bit Rate and Average Power 28 2.2.2 Definition of CFM and Examples 29 EXAMPLE 2.1 One-Dimensional PAM Constellation 29 EXAMPLE 2.2 ¢¡£ Square Grid 31 EXAMPLE 2.3 ¤ -Cube Grid 33 2.2.3 An Approximation to the Symbol Error Probability for Large Square QAM Constellations at High SNR 34 2.2.4 The Continuous Approximation 35 2.3. Constituent 2D Constellations and Constellation Expansion Ratio 36 v vi CONTENTS 2.4. Peak-to-Average Power Ratio 37 ¢¡ 2.4.1 PAR for the Square Grid and ¤ -Cube Grid 37 2.4.2 PAR for a Circle 38 2.4.3 PAR for the ¤ -Sphere 40 2.5.
    [Show full text]
  • APSK Constellation Shaping and LDPC Codes Optimization for DVB-S2 Systems
    International Journal of Modern Communication Technologies & Research (IJMCTR) ISSN: 2321-0850, Volume-2, Issue-6, June 2014 APSK Constellation Shaping and LDPC Codes Optimization for DVB-S2 Systems VANDANA A, LISA C DVB-S [1] is an abbreviation for “Digital Video Abstract - Here an energy-efficient approach is presented for Broadcasting – Satellite”, is the original Digital Video constellation shaping of a bit-interleaved low-density Broadcasting Forward Error Correction and demodulation parity-check (LDPC) coded amplitude phase-shift keying standard for Satellite Television and dates from 1995, while (APSK) system. APSK is a modulation consisting of several development lasted from 1993 to 1997. DVB-S is used in concentric rings of signals, with each ring containing signals both Multiple Channel Per Carrier (MCPC) and Single that are separated by a constant phase offset. APSK offers an attractive combination of spectral and energy efficiency, and is Channel per carrier modes for Broadcast Network feeds as well suited for the nonlinear channels. 16 and 32 symbol well as for Direct Broadcast Satellite. DVB-S is suitable for APSK are studied. A subset of the interleaved bits output by a use on different satellite transponder bandwidths and is binary LDPC encoder are passed through a nonlinear shaping compatible with Moving Pictures Experts Group 2 (MPEG 2) encoder. Here only short shaping codes are considered in order coded TV services. to limit complexity. An iterative decoder shares information among the LDPC decoder, APSK de-mapper, and shaping Digital Video Broadcasting - Satellite - Second decoder. In this project, an adaptive equalizer is added at the Generation (DVB-S2) [2] is for broadband satellite receiver and its purpose is to reduce inter symbol interference applications that has been designed as a successor for the to allow recovery of the transmit symbol.
    [Show full text]
  • Quadrature Spatial Modulation for 5G Outdoor Millimeter–Wave Communications: Capacity Analysis Abdelhamid Younis, Nagla Abuzgaia, Raed Mesleh and Harald Haas
    IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS 1 Quadrature Spatial Modulation for 5G Outdoor Millimeter–Wave Communications: Capacity Analysis Abdelhamid Younis, Nagla Abuzgaia, Raed Mesleh and Harald Haas Abstract—Capacity analysis for millimeter–wave (mmWave) (IEEE 802.15.3c-2009) [9], WiGig (IEEE 802.11ad) [10], and quadrature spatial modulation (QSM) multiple-input multiple- WirelessHD [11]. output (MIMO) system is presented in this paper. QSM is a Multiple–Input Multiple–Output (MIMO) systems are one new MIMO technique proposed to enhance the performance of conventional spatial modulation (SM) while retaining almost of the most promising technical advances in wireless com- all its inherent advantages. Furthermore, mmWave utilizes a munications in recent years. Such systems facilitate high– wide-bandwidth spectrum and is a very promising candidate throughput transmission in various recent standards includ- for future wireless systems. Detailed and novel analysis of the ing LTE, WIMAX, and others [12,13]. Hence, combining mutual information and the achievable capacity for mmWave– mmWave with MIMO systems promises significant boost in QSM system using a 3D statistical channel model for outdoor mmWave communications are presented in this study. Monte the overall achievable data rate to support future generations of Carlo simulation results are provided to corroborate derived broadband wireless communication technologies such as 5G formulas. Obtained results reveal that the 3D mmWave channel and beyond. model can be closely approximated by a log–normal fading Space Modulation Techniques (SMT) [14,15], such as spa- channel. The conditions under which capacity can be achieved tial modulation (SM) [16,17], differential spatial modulation are derived and discussed. It is shown that the capacity of QSM system can be achieved, by carefully designing the constellation (DSM) [18–20], generalized spatial modulation (GSM) [21, symbols for each specific channel model.
    [Show full text]
  • Constellation Shaping for IEEE 802.11
    Constellation Shaping for IEEE 802.11 Yunus Can Gultekin¨ ∗, W.J. van Houtumy, Semih S¸erbetliz and Frans M.J Willems∗ ∗Eindhoven University of Technology, Eindhoven, The Netherlands Email: fy.c.g.gultekin, [email protected] yCatena Radio Design, Eindhoven, The Netherlands Email: [email protected] zNXP Semiconductors, Eindhoven, The Netherlands Email: [email protected] Abstract—A constellation shaping scheme is proposed. argument, the performance of this concept improves with The motivation is to decrease the required transmit power increasing block length n. for a specified spectral efficiency. Instead of imposing a On the other hand, we are interested in improving the non-uniform distribution on the constellation or using non- uniformly spaced symbols, a sphere constraint is employed performance of IEEE Std 802.11 [6] with an emphasis on on the n-dimensional signal space. An efficient algorithm the 802.11p amendment which is designed for vehicular called enumerative amplitude shaping is given to find and networks. In these networks, the density of the users index all signal points in the sphere. A comparison with will be high which motivates us to work on shaping a prominent probabilistic shaping algorithm is provided. to decrease the transmit power levels (equivalently the The enumerative approach achieves the target rate more efficiently for small block lengths. To introduce error interference), and the packet sizes are planned to be rel- correction, the convolutional encoder used in IEEE Std atively small. Considering also the variability of packet 802.11 is combined with the shaper in a novel way. Instead sizes and the nature of the interleaving (e.g., block- of utilizing a larger constellation in combination with wise over orthogonal frequency-division multiplexing - shaping, a higher code rate is used by puncturing.
    [Show full text]
  • Joint Learning of Geometric and Probabilistic Constellation Shaping
    Joint Learning of Geometric and Probabilistic Constellation Shaping Maximilian Stark∗x{, Fayçal Ait Aoudiazx, and Jakob Hoydisz ∗Hamburg University of Technology Institute of Communications, Hamburg, Germany, Email: [email protected] zNokia Bell Labs, Paris, France, Email: {faycal.ait_aoudia, jakob.hoydis}@nokia-bell-labs.com Abstract—The choice of constellations largely affects the per- which maximize I(X; Y ), without requiring any tractable formance of communication systems. When designing constella- model of the channel. Autoencoders have been used in the tions, both the locations and probability of occurrence of the past to perform geometric shaping [1], [2]. However, to the points can be optimized. These approaches are referred to as geometric and probabilistic shaping, respectively. Usually, the best of our knowledge, leveraging autoencoders to achieve geometry of the constellation is fixed, e.g., quadrature amplitude probabilistic shaping has not been explored. In this paper, modulation (QAM) is used. In such cases, the achievable in- probabilistic shaping is learned by leveraging the recently formation rate can still be improved by probabilistic shaping. proposed Gumbel-Softmax trick [3] to optimize discrete distri- In this work, we show how autoencoders can be leveraged butions. Afterwards, joint geometric and probabilistic shaping to perform probabilistic shaping of constellations. We devise an information-theoretical description of autoencoders, which of constellation is performed. Presented results show that allows learning of capacity-achieving symbol distributions and the achieved mutual information outperforms state-of-the-art constellations. Recently, machine learning techniques to perform systems over a wide range of signal-to-noise ratios (SNRs) geometric shaping were proposed. However, probabilistic shaping and on both additive white Gaussian noise (AWGN) and fading is more challenging as it requires the optimization of discrete channels, whereas current approaches are typically optimized distributions.
    [Show full text]