DOCSLIB.ORG

— Threaded Products and Hardware

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
— Threaded Products and Hardware CHANNELS, CONCRETE INSERTS, THREADED PRODUCTS AND HARDWARE A11 — Threaded products and hardware Channel nuts All threaded products are American Standard Superstrut channel nuts are manufactured from thread, free fit class 2. grade 2 mild steel and are case hardened. 1 5 3 1 5 3 7 Design data Thread size (in.) ⁄4 ⁄16 ⁄8 ⁄2 ⁄8 ⁄4 ⁄8 1 Superstrut self-aligning channel nuts are designed Threads 20 18 16 13 11 10 9 8 to provide resistance to pullout and resistance per inch to side slip in excess of the full strength of the Design torque 6 11 19 50 100 125 185 275 channels with which they are used. The extreme (ft.-lb) resistance to side slip results from the unique design of the alternate teeth, spaced and designed Finish and special materials to develop a wedging action that increases with Standard finish for all hardware is pressure or load. electrogalvanized (EGC) or GoldGalv®. Stainless steel type 316 is also available. Contact your Screw threads regional sales office for availability and minimum quantities. — Spring nut selector chart Channel series Spring nut A–AR B–BR C D E H A100-1/4EGC A100-5/16EGC A100-3/8EGC A100-1/2EGC A100-3/4 B100-1/4EGC B100-5/16EGC B100-3/8EGC B100-1/2EGC H100-3/8EGC H100-1/2EGC CM100-1/4 CM100-3/8 CM100-1/2 CM100-1/2B UC100-1/4 UC100-3/8 UC100-1/2 A12 SUPERSTRUT METAL FRAMING — Threaded products and hardware — — A100 Regular spring nut* B100 Short spring nut* Std. pack 100 Std. pack 100 Cat. No. Size (in.) Wt./C lb Cat. no. Size (in.) Wt./C lb 1 1 A100-1/4EGC ⁄4 8 B100-1/4EGC ⁄4 7 5 5 A100-5/16EGC ⁄16 9 B100-5/16EGC ⁄16 8 3 3 A100-3/8EGC ⁄8 10 B100-3/8EGC ⁄8 9 1 1 A100-1/2EGC ⁄2 12 B100-1/2EGC ⁄2 9 5 A100-5/8EGC ⁄8 19 3 A100-3/4 ⁄4 19 Available in stainless steel 316. 7 A10 0 -7/8 ⁄8 18 For all B and D series channel and inserts. 1 Available in stainless steel 316. Nut is square over ⁄2 in. size. For all A and C series channel and inserts. — — 1 3 AB100 Springless nut ⁄4 in. thick AC100 Springless nut heavy-duty ⁄8 in. thick Std. pack 100 Std. pack 100 Cat. no. Size (in.) Wt./C lb Cat. no. Size (in.) Wt./C lb 1 3 AB100-1/4EGC ⁄4 7 AC100-3/8EGC ⁄8 9 5 1 AB100-5/16EGC ⁄16 8 AC100-1/2EGC ⁄2 11 3 5 AB100-3/8EGC ⁄8 9 AC100-5/8EGC ⁄8 18 1 3 AB100-1/2EG ⁄2 9 AC100-3/4EGC ⁄4 18 5 AB100-5/8EG ⁄8 10 3 AB100-3/4EG ⁄4 10 For all A, C, E and H series channel and inserts. 1 1 For use with all channels. Nut is square over ⁄2 in. size. Nut is square over ⁄2 in. size. — — H100 Long spring nut* A177 to A179 Springless stud nut Std. pack 100 Std. pack 100 Cat. no. Size (in.) Wt./C lb Bolt dia Length Wt./ 3 Cat. no. (in.) A (in.) C lb H100-3/8EGC ⁄8 10 1 4 1 Diagram A177-1/4x100EG ⁄ 1 8 H100-1/2EGC ⁄2 14 1 1 A177-1/4x125EG ⁄4 1 ⁄4 10 A 3 A179-3/8x100EG ⁄8 1 13 3 1 A179-3/8x125EG ⁄8 1 ⁄4 13.5 For all E and H series channel and inserts. For use with all channels. — — A182 to A185 Regular spring stud nut* 813EG Springless nut light-duty Std. pack 100 Std. pack 100 Bolt dia Length Wt./ Cat. no. Size (in.) Wt./C lb Cat. no. (in.) A (in.) C lb 1 813EG ⁄4 5 1 Diagram A182-1/4x100EG ⁄4 1 10 1 1 A182-1/4x125EG ⁄4 1 ⁄4 15 A 3 A184-3/8x100EG ⁄8 1 10 3 1 A184-3/8x125EG ⁄8 1 ⁄4 15 1 A185-1/2x100EG ⁄2 1 10 1 1 A185-1/2x125EG ⁄2 1 ⁄4 15 For all A and C series channels. For use with all channels. *Supplied with a plastic sleeve over the spring portion to prevent tangling inside the carton. THREADED PRODUCTS AND HARDWARE A13 — Threaded products and hardware — — E145 Standard hex nut ES145 Swivel nut and jam nut combinations Std. pack 100 Std. pack 100 Cat. no. Size (in.) Wt./C lb Cat. no. Size (in.) Wt./C lb 1 3 E145-1/4EGC ⁄4 .72 ES145-3/8 ⁄8 5.5 3 1 E145-3/8EGC ⁄8 1.60 ES145-1/2 ⁄2 6.0 1 E145-1/2EGC ⁄2 2.78 5 E145-5/8EG ⁄8 6.92 3 E145-3/4EGC ⁄4 12.70 7 E145 -7/8EGC ⁄8 19.00 E145-1EGC 1 28.00 — AB102 Unhardened square nut Std. pack 100 — 812 Stud nut Cat. no. Size (in.) Wt./C lb Std. pack 100 1 AB102-1/4 ⁄4 13 Cat. no. Size (in.) Wt./C lb 3 AB102-3/8 ⁄8 14 1 812-1EG ⁄4 x 1 6 1 AB102-1/2 ⁄2 14 5 AB102-5/8 ⁄8 12 3 AB102-3/4 ⁄4 11 7 A B102-7/8 ⁄8 10 — E146 Standard square nut Std. pack 100 For attaching fixture to channel slot down or to channel slot up knockouts. Cat. no. Size (in.) Wt./C lb Specify length. Hex nut included. 1 E146-1/4EG ⁄4 .93 5 — E146-5/16EG ⁄16 1.60 3 UCN Universal nylon cone nut E146-3/8EGC ⁄8 2.65 Std. pack 100 1 E146-1/2EG ⁄2 5.83 5 Cat. no. Size (in.) Wt./C lb E146-5/8EG ⁄8 10.80 1 UCN-1/4 ⁄4 8 — 3 UCN-3/8 ⁄8 10 EF147 Fender washer 1 Std. pack 100 UCN-1/2 ⁄2 12 Size A B Wt./ Cat. no. (in.) (in.) (in.) C lb GoldGalv® only 1 1 5 5 1 4 4 16 For all 1 ⁄8 in. and 1 ⁄2 in. channels. Diagram EF147-1/4EGC ⁄ 1 ⁄ ⁄ 3.1 May be used with ALL strut depths. 3 1 7 EF147-3/8EGC ⁄8 1 ⁄2 ⁄16 2.9 Can be used for A100 series, B100 series and AB100 series. 1 9 B EF147-1/2EGC ⁄2 2 ⁄16 5.0 — E147 Flat steel washer A Std. pack 100 Available in stainless steel. Cat. no. Size (in.) Wt./C lb — 1 E147-1/4EG ⁄4 0.67 E148 Lock washer 5 E147-5/16EG ⁄16 1.11 Std. pack 100 3 E147-3/8EG ⁄8 1.49 Cat. no. Size (in.) Wt./C lb 1 E147-1/2EG ⁄2 3.85 1 E148-1/4EG ⁄4 0.26 5 E147-5/8EG ⁄8 7.69 3 E148-3/8EG ⁄8 0.50 3 E147-3/4EG ⁄4 9.89 1 E148-1/2EG ⁄2 1.09 7 E147-7/8EG ⁄8 15.40 5 E148-5/8EG ⁄8 2.57 Available in stainless steel. Available in stainless steel. A14 SUPERSTRUT METAL FRAMING — Threaded products and hardware — H104 Hanger rod continuous threaded E142 Hex head cap screw Std. pack 3 Std. pack 100 • Black available upon request Cat. no. Size (in.) Wt./C lb • Sold per foot; standard length, 10 ft. 1 E142-1/4x100EG ⁄4 x 1 1.74 • Also available in stainless steel (316) standard length 1 1 E142-1/4x150EG ⁄4 x 1 ⁄2 2.43 6 ft. (suffix SS6) 3 E142-3/8x100EG ⁄8 x 1 4.17 • National coarse thread 3 1 E142-3/8x150EG ⁄8 x 1 ⁄2 5.64 1 E142-1/2x100EG ⁄2 x 1 8.94 1 1 E142-1/2x150EG ⁄2 x 1 ⁄2 10.00 Thread Wt./lb Design 1 Cat. no. size (in.) 100 ft. Load lb E142-1/2x200EG ⁄2 x 2 11.19 1 1 1 H104-1/4x10EGC ⁄4 12.5 150 E142-1/2x225EG ⁄2 x 2 ⁄4 11.90 3 1 1 H104-3/8x10EGC ⁄8 29 610 E142-1/2x250EG ⁄2 x 2 ⁄2 12.52 1 1 3 H104-1/2x10EGC ⁄2 53.5 1,130 E142-1/2x275EG ⁄2 x 2 ⁄4 13.22 5 Available in stainless steel. H104-5/8x10EGC ⁄8 85 1,810 3 H104-3/4x10EGC ⁄4 123 2,710 7 — H104-7/8x10EG ⁄8 130 3,770 E151 Coach screw rod H104-1x10EG 1 214 4,960 Rod size Std rod Cat. no. (in.) length (in.) Wt./C lb 3 E151-3/8x4EG ⁄8 4 9 3 E151-3/8x6EG ⁄8 6 14 3 E151-3/8x8EG ⁄8 8 22 3 E151-3/8x10EG ⁄8 10 29 3 E151-3/8x12EG ⁄8 12 35 1 E151-1/2x4EG ⁄2 4 17 1 E151-1/2x6EG ⁄2 6 22 — 1 H119 Rod couplings – standard E151-1/2x8EG ⁄2 8 40 1 E151-1/2x10EG ⁄2 10 51 Rod size A (in.) Wt./C lb 1 7 Diagram ⁄4 ⁄8 1.90 5 7 ⁄16 ⁄8 3.75 3 1 ⁄8 1 ⁄8 3.50 1 1 ⁄2 1 ⁄4 5.50 5 1 A ⁄8 2 ⁄8 18.00 Machine threaded opposite end, carbon steel. 3 1 ⁄4 2 ⁄4 28.00 7 1 ⁄8 2 ⁄2 55.00 — 1 1 2 ⁄4 56.00 E150S Lag bolt Std. pack 50 Standard rod coupling Example: H119-1/2EG Drill size Size Order by product number, rod size, and finish.
Load more

Recommended publications
  • 248 Superstrut® Threaded Products & Hardware (Series 100)
    War_245_264 5/7/04 1:21 PM Page 248 248 50 Pennsylvania Avenue • Warwick, Rhode Island 02888 F asteners & asteners Hardware Nuts & Bolts CM-100 Nylon Cone Nut Sizes: 1/4", 3/8", *1/2" & **100B-1/2" For all 1-5/8" channel. *Will not fit “B” series channel. **For “B” Series channel. ® Superstrut® Threaded Products & GoldGalv Finish Anchors A-100 Regular Spring Nut Hardware Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" & 7/8" Nut is square over 1/2" size. (Series 100) For all “A” and “C” series channel and inserts. Silver Electroplated Finish Channel Nuts Superstrut channel nuts are manufactured B-100 Short Spring Nut from mild steel and are case hardened. Sizes: 1/4", 5/16", 3/8" & 1/2" Drilling, Tapping Nut is square over 1/2" size. Design Data For all “B” series channel and inserts. & Cutting Superstrut self aligning channel nuts are Silver Electroplated Finish designed to provide resistance to pull out and resistance to side slip in excess of the H-100 Long Spring Nut full strength of the channels with which Sizes: 3/8", 1/2" & 5/8" they are used. The extreme resistance to Nut is square over 1/2" size. side slip results from the unique design of For all “E” and “H” series channel and inserts. the alternate teeth, spaced and designed to Silver Electroplated Finish develop a wedging action that increases Diamond Products with pressure or load. AC-100 Springless Nut Abrasives & Sizes: 1/4", 3/8", 1/2", 5/8" & 3/4" Nut is square over 1/2" size.
    [Show full text]
  • Side Winder PRECISION WOODWORKING TOOLS R O U T E R L I F T
    Woodpeckers ® Side Winder PRECISION WOODWORKING TOOLS R o u t e r L i f t . INSTALLATION INSTRUCTIONS Lift Once fully The wrench Wrench inserted, rotate handle must the wrench in be pointing either direction left in order to ¼ turn and fully insert or completely raise remove it. the carriage. Carriage Figure 2. Figure 3. Made in U.S.A. by Woodpeckers Inc. Protected by one or more of the following U.S. Patents; 6,505,659; 7,559,347; 7,481,253; 7,108,463 and other patents pending. USING THE LIFT WRENCH You’ll need to know how to use the Lift Wrench to install your router motor. The Lift Wrench is typically used without the lift spring and comes without the lift spring installed. It’s SAFETY recommended that the wrench be used without the spring Always unplug your router motor before making any adjustments for installation of the router motor. to the router lift. Refer to your routers’ owners manual for specific Figure 2. To change the carriage height (the carriage is safe operating instructions. the part beneath the table that holds the motor), orient the wrench with the handle pointing left toward the adjustable scale. BEFORE YOU BEGIN Insert the wrench until it’s COMPLETELY BOTTOMED The Woodpeckers® Side Winder can be installed in most OUT. Once it’s all the way in, try and rotate it. If it doesn’t router tables with a standard 9¼ x 11¾ opening and a side turn, it isn’t in. Do not force the wrench. Take it out, push it panel mounting surface no more than 19" away as in the back down and try again.
    [Show full text]
  • PDF Product List
    STRUCTURAL BOLTS MACHINE BOLTS NUTS A325 Screw Only, A193 B7 Heavy Hex Head Bolt Acorn (Cap) Nut Domestic & Import A307A Breakaway Bolt Allen Nut A325 Bolt with Nut A307B Heavy Head Bolt Cap (Acorn) Nut A325 Type 3 Bolt, Domestic F1554 Hex Machine Bolt Castle Nut A325 Interference Body Bolt (Grades 36, 55, & 105) Coupling Nut Canadian A325 Bolt w/DH Nut, Square Head Machine Bolt Coupling Nut, Reducer Hot Dip Galvanized Coupling Nut, Heavy Duty A490 Screw Only, BOLTS & SCREWS Hex Nut Domestic & Import Carriage Bolt Hex Nut, Left Hand TC A325 Assembly, Countersunk Bolt Hex Nut, Heavy Grade 4 Domestic& Import Counterbore Screw, 12 Point Hex Nut, Heavy, Grade 7 TC A490 Assembly, Elevator Bolt Hvy Double Recess Guardrail Nut Domestic & Import Flange Bolt Jack Nut Flat Head Bolt, Slotted Jam Nut STRUCTURAL NUTS Guardrail Bolt Jam Nut, Left Hand A194 2H Nut, Domestic Hanger Bolt Flange Nut A194 2H Nut, Import Lag Screw High Nut A563 Grade DH Heavy Nut, Lag Screw, 1-Way Truss Head Knurled Nut Domestic Lag Screw, Indented HWH Machine Screw Nut, Hex A563 DH Type 3 Nut Full Thread Machine Screw Nut, Small Pattern ANCO Heavy Hex Locknut Lag Screw, Square Head Machine Screw Nut, Square ANCO Finished Locknut Penta Head Bolt Palnut ANCO 2H Heavy Locknut Place Bolt Panel Nut ANCO A325 Locknut Plow Bolt, Grade 2 Slotted Nut Plow Bolt, Grade 5 Slotted Nut, Heavy STRUCTURAL WASHERS Plow Bolt, Grade 8 Square Nut F436 Hardened Washer Shaker Screen Bolt, Grade 5 Square Nut, Heavy Domestic & Import Shackle Bolt Tee Nut F436 Type 3 Washer Security Bolt Wing
    [Show full text]
  • Fastener Identification Guide • 4.13 KM • Printed in the USA
    HEAD STYLES Hex Cap Screw Bugle Hex cap screws feature a washer face on the Button Washer bearing surface, a chamfered point, and tighter body tolerances than hex bolts. Pan Binding Undercut Hex Bolt Similar to hex cap screw, hex bolts do not require a washer face or a pointed end and have a greater tolerance range in the body. Round Head Fillister Socket Head Cap Screw Socket heads feature an internal hexagonal drive DRIVES socket and close tolerances for precision assembly. Flat 82° Cross Recess Button Head Socket Cap Screw Type I FASTENER (Phillips) Button heads feature a dome shaped head, though Flat 100° this feature reduces the tensile capacity. Cross Recess Flat Head Socket Cap Screw Type IA Flat heads feature an 82° countersunk head for Flat Undercut (Pozidriv®) IDENTIFICATION flush connections. Like the button heads, this feature reduces the tensile capacity. Cross Recess Type II (Frearson) Low Head Socket Cap Screw Indented Hex Low heads are similar to standard socket heads, but with a shorter head for applications where clearance Cross Recess Square GUIDE is an issue. This head configuration also reduces the Combo strength capacity. Indented Hex Washer (Quadrex®) NUTS Carriage Bolt A round head bolt with a square neck under the Slotted head. These must be tightened with a nut. Serrated Hex Finished Hex Nuts: Hex Coupling Nuts: Washer Hexagonal shaped nuts with internal screw Designed to join two externally threaded Plow Bolt threads. Finished hex nuts are one of the most objects, usually threaded rod, together. Combination Similar to a carriage bolt, these have a flat head common nuts used.
    [Show full text]
  • Threaded Fasteners
    Threaded Fasteners Introduction If you are designing and building a Formula SAE vehicle, threaded fasteners will likely be used to join the various components and systems together and allow the vehicle to function as a unified machine. The reliability of your vehicle is key to realize your potential at the competition. Even though threaded fasteners have been in use for hundreds of years and are in products that we use every day, their performance is dependent on a wide range of factors. This chapter covers some of the main factors that can influence reliability and is intended as an aid in joint design, fastener selection, and installation. The first portion of this chapter covers several design and installation factors that can work together to improve the reliability of your vehicle’s bolted joints. These topics include, the importance of generating and maintaining clamp load, and how clamp load, along with joint stiffness, can work together to prevent self-loosening and improve fatigue performance. The second portion of this chapter reviews how installation method and torque are related to clamp load, and also includes a comparison between common fastener types to aid in selection. The chapter concludes with a short tutorial showing how to obtain Mil Spec information on fasteners and similar hardware. Disclaimer – Multiple factors on each component in a bolted joint affect its performance. Additionally, service requirements for every joint differ. Each joint must be evaluated and tested for its ability to perform the desired function. The information in this chapter provides general background and does not represent how a specific design or piece of hardware will perform.
    [Show full text]
  • Engineered Domestic Lock Nuts
    LOCK NUTS Engineered Domestic Lock Nuts Principal Products: Markets Collarlok® Nuts Aerospace ESlok® Nuts Automotive Brake, Exhaust, Fuel, Interior Trunk, Fuel, Strux® Nuts Power Steering, Power Train, Suspension Whiz Lock® Nuts Agriculture Wheel nuts Sickle Bar Guards, Wheel Fastening Nut & bracket assemblies Truck and Trailer Nut & washer assemblies Bearing Retention, Wheel Fastening Nylon nuts Industrial Fasteners used for assemblies All metal lock nuts Lawn and Garden Lawn Tractor Components, Shift Linkages Collarlok® The Collarlok prevailing torque hex or flange nut design offers the reuse characteristics of the proven ESNA insert type. A red nylon collar bonded into the head of the nut provides a prevailing torque type nut with the advantage of high speed assembly using automatic assembly tools. The non-galling collar offers superior vibration performance in standard or metric threads. ESlok® The ESlok red nylon locking patch type fastener has a controlled amount of red nylon permanently bonded to the threads of the standard hex nut and to the center threads of the nut permitting either end entry of the bolt for automatic machine assembly. Parts are easily removed with a wrench and may be reused up to five times. No metal is removed or distorted insuring the tensile strength and non-galling characteristics of an ESlok self-locking fastener. 2369 Schuetz Road Saint Louis, Missouri 63146 Phone 314/ 567-8585 Fax 314/567-7334 LOCK NUTS Strux® Nuts The Strux nuts system provides a completely automated, accurate and reliable method for installing fasteners, as well as eliminating expensive manual secondary operations and increasing productivity. The result is a precisely located threaded hole that becomes an integral part of the steel plate.
    [Show full text]
  • FASTENERS Power-Strut Clamping Nuts Are Cold Formed, with Two Grooves, Each with Six Sharp Teeth and Then Case Hardened
    FASTENERS Power-Strut Clamping Nuts are cold formed, with two grooves, each with six sharp teeth and then case hardened. These sharp hardened teeth bite into the inturned edges of the Power-Strut channel forming a strong vise-like connection giving greater strength and resistance to slippage. ®ÊMATERIAL: Channel clamping nuts meet ASTM A576 GR1015M, and are case hardened. Hex head bolts meet SAE J429 GR 2. Square and hex nuts meet ASTM A563 GR A. ®ÊSCREW THREADS DATA: All Power-Strut nuts and bolts are manufactured to meet the Unified Screw Threads standard, ANSI B1.1, Coarse Series UNC, class 2. Continuous Threaded Rod: Meets ASTM A-510. ®ÊSTANDARD FINISH: All fasteners have an electro-galvanized finish. ®ÊRECOMMENDED BOLT TORQUE: Bolt Size 1⁄4"–20 5⁄16"–18 3⁄8"–16 1⁄2"–13 5⁄8"–11 3⁄4"–10 Rec. Torque 6 11 19 50 100 125 Ft/Lbs Max. Torque 7 15 25 70 125 135 Ft/Lbs 43 , Ê /" )$67(1(56 Channel Nut Selection Chart Nuts Channel PS LS PS SS PS RS PS NS PS NS S PS 517 PS TG PS 3281 PS 3500 PS ML PS KW aa aaaa PS 100 5 1 1 ⁄8 x 3 ⁄4 x 12 ga. aa aaaa PS 150 5 7 1 ⁄8 x 2 ⁄16 x 12 ga. PS 200 aa aaaaaa 5 5 1 ⁄8 x 1 ⁄8 x 12 ga. PS 210 aa aaaaaa 5 5 1 ⁄8 x 1 ⁄8 x 14 ga. PS 300 aa aaaaaa 5 3 1 ⁄8 x 1 ⁄8 x 12 ga.
    [Show full text]
  • Self-Clinching Nuts Install Permanently in Aluminum, Steel Or Stainless Steel Sheets
    PEM® brand self-clinching nuts install permanently in aluminum, steel or stainless steel sheets. CL™ SELF-CLINCHING NUTS SELF-CLINCHING NUTS Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation. S™/SS™/CLA™/CLS™/CLSS™ nuts H™ (non-locking) and HNL™ (locking) provide load-bearing threads in thin nuts have threads that provide high sheets with high pushout and torque-out pushout and torque-out resistance - resistance - PAGES 4 and 5 PAGE 8 SP™, PEM 300® nuts provide strong SH™ hard panel nuts install into thin, load-bearing threads in stainless steel harder, high strength steel materials - sheets as thin as .030”/0.8 mm - PAGE 8 PAGES 4 and 5 SMPS™/SMPP™ nuts are for thinner PEM RT® free-running locknuts are sheet/close-to-edge applications - free-running until clamp load is induced. A PAGE 9 modified thread angle on the loaded flank provides the vibration resistant locking Material and finish specifications - PAGE 9 feature- PAGE 6 SL™ self-locking nuts are designed with Installation - PAGES 10 and 11 a unique and economical TRI-DENT® locking feature, meeting 3 cycle locking Performance data - PAGES 12 - 15 performance requirements - PAGE 7 Many PEM self-clinching nuts in this bulletin are dimensionally equivalent to nuts manufactured to NASM45938/1 specifications. Consult our Marketing department for a complete Military Specifications and National Aerospace Standards guide (Bulletin NASM) on our website.
    [Show full text]
  • Multisource Fasteners
    Atlanta, Ga Chicago, Il Yorba Linda, Ca Cleveland, Oh We have four strategically located distribution centers to ensure dependable delivery in two days or less to 90% of the country’s businesses. The need for air freight is all but eliminated except in the most extreme emergencies. Most orders placed by 2:00 PM your time can be shipped the same day from the Buckeye distribution center nearest you. Call our toll free number for prompt, courteous service. FAX: 1-216-267-3228 E-mail: [email protected] www.buckeyefasteners.com We Stock A Large Assortment Of Quality Fasteners From These Leading Fastener Companies; The Ohio Nut And Bolt Co. Brainard Rivet Company Captive Fastener Corp. Miniature Nut and Screw Stafast Products Inc. Con–Torq Division Decker Mfg. Corp. Alliance Plastics Looking for an item that you don’t see in our catalog? Contact our sourcing department, Multisource Fasteners. They can be reached by phone at 888-784-5157 or by fax at 216-265-2268. They have access to an unlimited variety of fasteners and related products not shown in our catalog. They also have suppliers who will modify standard parts by drilling holes, add locking features, etc. Multisource Fasteners 5250 West 164th Street Brook Park, Ohio 44142-1597 USA 888-784-5157 (216) 267-2240 FAX: (216) 265-2268 www.multisourcefasteners.com [email protected] Purchasing Information Prices ............................................ Packaged quantity price breaks occur at one, two, three, fi ve and ten thousand pieces. Quantities under one thousand pieces are priced by a lot charge formula that is based on one hundred piece increments.
    [Show full text]
  • Fastener Guide
    Experts in supplying Vendor Managed fasteners and industrial Inventory Programs products to manufacturers and sub-contract On-Site Parts assemblers. Kitting Department 763.535.0400 763.535.0400 Table of Contents Standard Fasteners.................................................................. 3 Hex Bolt Sizes and Thread Pitches Size Chart.............................................................. 4 Standard US Machine Screw Size Chart....................................................................... 7 Sheet Metal Screw Size Chart....................................................................................... 8 Shoulder Bolt Size Chart................................................................................................ 9 Socket Button Head Size Chart.................................................................................... 11 Socket Cap Size Chart................................................................................................. 12 Socket Flat Head Size Chart........................................................................................ 15 US Nuts Size Chart...................................................................................................... 17 SAE Flat Washer Size Chart........................................................................................ 20 USS Flat Washer Size Chart........................................................................................ 21 Screw Eye Size Chart.................................................................................................
    [Show full text]
  • Onshape: Nut and Bolt Tutorial By: Matthew Jourden Brighton High School Brighton, MI
    OnShape: Nut and Bolt Tutorial By: Matthew Jourden Brighton High School Brighton, MI Objective: Design a Commercially Off Shelf (COTs) Nut and Bolt with a detailed thread. COTs Parts are considered to be standardized parts. Parts like nuts, bolts, screws, washers, cotter pins, woodruff keys, etc. are standardized based on one measurement. An engineering can gather the necessary resources from a variety of manuals like Machinery Handbook, ANSI or ISO manuals or Appendix on a Engineering Textbook (see below). The various measurements of fasteners will typically be a factor of the Major Diameter of the Thread. Utilizing reference charts (see below) will save the engineer time in having to calculate out the various measurements of a fastener. Thread Representation Parts to a Thread Thread Dimension Charts: Nut and Bolt Sizes Major Diameter 1. Navigate to brightonk12.onshape.com > Create a New Document > Rename Tutorial Nut and Bolt 2. Bolt Creation: ½-13UNC-2B a. Rename Part Studio 1 > Bolt: Detailed b. Bolt Body i. Select Sketch > Rename Sketch to Bolt Body > Select Top Workplane (Datum) > Draw the following circle > Green Check > Select Extrude Icon > Rename Bolt Length > Extrude Length 2 > Green Check to Accept c. Chamfer: Chamfers are used at the end of a fastener or top of a bolt ahead to make it easier for alignment into the mating feature (i.e. the bolt shaft into the threaded hole or align the sockets wrench) i. Select Chamfer Tool > Select the edge of the lower circle (bottom edge of part) > Set Value at .0625 > Green Check to Accept d. Bolt Hexagonal Head To create the bolt head designer will need to first draw a construction circle that will represent the distance between the corners of a hexagon the then circumscribe a hexagon on the inside of the circle.
    [Show full text]
  • Keeping It Together the Nuts and Bolts of Fasteners
    KEEPING IT TOGETHER THE NUTS AND BOLTS OF FASTENERS Presented by Jim Rowe October 2011 We take fasteners and the complex system we have for identifying them by type and usage for granted. Here is some information that may help you in choosing the proper fastener for all your repair/replacement needs. Starting at the beginning, the invention of the screw thread is attributed to Archimedes in the 3rd century BC. The Archimedes Screw consisted of a cylinder with an internal continuous screw thread. When the lower end was placed into water and the cylinder rotated, water was raised to a higher level. The principle was also applied for handling light, loose materials such as grain, sand and ashes. The screws that we have today use the same technique in that a mating threaded component, rather than water, is moved through the cylinder. Sir Joseph Whitworth, a British mechanical engineer, became known for his work on engineering standards. In 1841 he proposed the introduction of standard fastener sizes to the Institution of Civil Engineers. These comprised a universal set of specifications for the angle and pitch of screw threads, the Whitworth thread became the first standard thread system in the world. Threaded fasteners are classified by shape, material and finish, which are specified by industry standards. In the United States, the American Society for Testing Materials (ASTM) sets the standards. In Europe, the International Standards Organization (ISO) sets the standards. Types of Fasteners Unified National Coarse Threads (UNC) UNC threads are the most common general fastener thread. Their fit is deeper and more generic than that of a fine thread, allowing for easy removal.
    [Show full text]