DOCSLIB.ORG

Endeavour Endeavour

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Endeavour Endeavour ENDEAVOUR Automatic CNC drilling, drilling & band sawing, drilling & coping lines for profiles TECHNICAL CHARACTERISTICS ENDEAVOUR DRILLING MODEL 603 DD 1203 DD 2003/6 DD 2003/8 DD 2503/8 DD 2503/10 DD 3003/12 DD 603 DD LASER 1203DD LASER Web height min/max mm 80/610 80/1220 80/2030 200/2030 200/2515 200/2515 200/3000 Flange width min/max mm 10/305 10/610 10/610 75/810 75/810 100/1015 100/1200 Drill heads No. 3 3 3 3 3 3 3 092015 Advanced Agency VA Tools per spindle No. 6 6 6 6 6 6 6 Max hole diameter mm 40 40 40 40 40 40 40 Spindle power kW 31 31 31 31 31 31 31 Spindle speed rpm 5000 5000 5000 5000 5000 5000 5000 Spindle fast approach/ mt/min 30 30 30 30 20 20 20 return speed Aux. axes stroke mm 250 250 250 250 200 (opt) 200 (opt) 200 (opt) CNC axes No. 7 7 7 7 7 7 7 ENDEAVOUR - DRILLING & BAND SAWING MODEL 603 DDB 1003 DDB 1103 DDB 1203 DDB 2003/6 DDB 2003/8 DDB 2503/8 DDB Drill heads No. 3 3 3 3 3 3 3 Spindle power kW 27 27 27 27 27 27 27 Sawing capacity min.mm 60 x 10 80 x 10 80 x 10 80 x 10 200 x 10 200 200 at 90° max.mm 610 x 310 1015 x 450 1100 x 510 1250 x 610 2000 x 600 2000 2500 Blade size mm 34 x 1.1 41 x 1.3 54 x 1.6 67 x 1.6 67 x 1.6 67 x 1.6 67 x 1.6 Blade speed mt/min 150 170 170 170 170 170 170 Band saw motor kW 7 9 15 15 18 19 19 CNC axes No. 7+2 7+2 7+2 7+2 7+2 7+2 7+2 ENDEAVOUR - DRILLING & COPING MODEL 604 DDFRC 1204 DDFRC 2004/6 DDFRC 2004/8 DDFRC 2504/8 DDFRC 2504/10 DDFRC Web height min/max mm 80/610 80/1220 80/2030 80/2030 200/2515 200/2515 ENDEAVOUR Flange width min/max mm 10/305 10/610 10/610 75/810 75/810 100/1015 Automatic CNC drilling, Drill heads No. 3 3 3 3 3 3 drilling & band sawing, drilling & coping lines for profiles Oxy-fuel torch No. 1 1 1 1 1 1 Plasma torch (option) No. 1 1 1 1 1 1 CNC axes No. 7+6 7+6 7+6 7+6 7+6 7+6 Please review FICEP’s terms and conditions of sale and its machine tolerances that appear in its transactional documents which will be furnished upon request. All the specifications on this catalogue are mere indicative and not binding for the manufacturer. The above mentioned data refer to R=45 kg/mmq material. Dimensional tolerances of the raw sections are to UNI 5783-5784/73 standards. FICEP France FICEP Mexico FICEP Iberica FICEP Sul America Service FICEP UK FICEP Middle East FICEP Ireland FICEP Hong Kong FICEP S.p.A. - HEADQUARTERS FICEP via Matteotti, 21 • 21045 GAZZADA SCHIANNO VA - ITALY FICEP DE FICEP Guangzhou Tel +39 0332 876111 • Fax +39 0332 462459 FICEP Russia FICEP Austria Service since Email: [email protected] • www.ficepgroup.com FICEP Corporation FICEP India Service 1930 MADE IN ITALY ENDEAVOUR Automatic CNC drilling, drilling & band sawing, drilling & coping lines for profiles New auxiliary axes The three spindles are equipped with a new additional auxiliary axis that allows independent control of the spindle over a 250 mm stroke. By this method, with the beam being stationary, we ENDEAVOUR is a new three spindle drilling line for the processing of beams and shaped rolled can maximize the utilization of each spindle within the stroke. Whilst drilling on one side/flange sections with small and large dimensions. With the new innovations and the modular structure it is it is possible to perform other operations that require an interpolation on one of the other sides a significant step forward in beam processing. of the beam being processed. Helical milling, pocketing, weld prep milling, slotting, are few of the features allowed by this unique solution. The ENDEAVOUR is compact, essential, linear and very high tech with its new DIRECT DRIVE motors. The power of the motor and the speed of positioning together with the new rack and pinion Drilling, sawing and coping with combined machines driving cinematics give a feeling of silence and speed under control never felt before. Endeavour can be easily combined with band saws and coping robots to create very powerfull Pegaso is the new generation and flexible working units managed with one CNC control unit. This allows to cover such typical CNC for Ficep machines. PC, task as straight or mitered cuts with band saw, plasma or oxy thermal coping to automatically CNC and PLC are all integrated cut shapes, flange thinning, rat holes, weld preps, splitting in the section. on a single board, to have the maximum reliability. Pegaso is based on field bus technology: CanBus and EtherCAT, with up to 32 axes controlled. Endeavour drilling line combined with band saw Auxiliary axes Underside web scribing device Endeavour drilling line combined with coping robot.
Load more

Recommended publications
  • Securedge™ 300/3000 Series Brochure
    SecurEdge™ 300/3000 Series Engineered Commercial Roof Edge Systems Experience the Carlisle Difference In the 1960s, Carlisle SynTec Systems transformed the commercial roofi ng industry with the introduction of its Sure-Seal® EPDM single-ply membrane. Since that time, Carlisle has earned a reputation for providing the most dependable and longest-lasting single-ply roof systems on the market. Today, Carlisle’s product offering has grown to include Sure-Weld® TPO, Sure-Flex™ PVC, and FleeceBACK® membranes, as well as a full line of labor-saving accessories. Carlisle also offers edge metal, Roof Garden components, coatings, skylights, and pavers, and manufactures its own polyiso and EPS insulation, adhesives, primers, and membrane cleaners. Carlisle roofs have been installed on a wide range of buildings around the world, including schools, hospitals, warehouses, and cold-storage facilities. With more than 15 billion square feet of roofi ng materials sold and installed, Carlisle continues to lead the industry by providing innovative products, services, and warranty options. Whatever your roofi ng needs, Carlisle has a system – and a solution – for you. SELECTING THE IDEAL PERIMETER CARLISLE’S SECUREDGE EDGE SYSTEM FOR YOUR BUILDING 300/3000 PRODUCT LINE The importance of a properly designed roof edge system should not be underestimated. On average, the roof edge typically represents only 1% of a » SecurEdge 3000XT Fascia building’s overall cost. However, improper design and installation of the roof » SecurEdge 3000 Fascia edge can have catastrophic consequences. Selecting a properly designed and » SecurEdge 300 Coping tested metal edge system can diminish the risks and result in a roof system that stands the test of time.
    [Show full text]
  • October 2018 Newsletter
    Canterbury Community Newsletter Canterbury Greetings Canterburians, October is filled with the celebrated offerings of all things fall in northern New England, complete with the backdrop of breathtaking reds and oranges of fall color. As part of such a lovely month, I am excited to be sharing with you an invitation to an event many have joined together to plan since we launched a similar event a year ago, and found widespread enthusiasm to build it into an ongoing offering in the greater Canterbury Community. Please consider joining us for all or a portion of this event at Shaker Village at the end of this month: ”Sharing Practices of the Spirit at Canterbury Shaker Village” Everyone is welcomed to a special event at the Shaker Village on Sunday, October 28: a day for exploring spiritual practices from a variety of beliefs, traditions and ways to gather, share, and celebrate our deepest connections. The event is co-sponsored by Canterbury Shaker Village, the Canterbury United Community Church, the Concord Quaker Meeting, and the Church of the Woods / Kairos Earth. The day’s activities are free, family-friendly and run from 8 a.m. to 2 p.m. Highlights of the day include a variety of workshop offerings, children’s activities, a joint ecumenical worship service, a potluck lunch and a send-off gathering. Offerings collected during the service will benefit the Canterbury Fund. Two sets of workshops, one at 9 and the other at 11:15, will offer opportunities to engage your sense of spirituality through nature, contemplation, song and movement. Here are your options (weather permitting!) at the two times: 9 am: Yoga; a Thomas Merton Contemplative Walk; and Songs of the Spirit.
    [Show full text]
  • Introduction to Carpentry Tools and Joints
    INTRODUCTION TO CARPENTRY TOOLS 1. Try Square 2. Steel Rule 3. Marking Guage 4. Coping Saw 5. Tenon Saw 6. Penon Saw 7. Ironjack Plane 8. Benchwise 1. Try Square This is used to mark lines at 90 degrees to a straight edge. It is used to mark out lines square to the face edge and face side. It may also be used to check if edges are straight. If the try square is placed on the edge of the material and held up to a light, any light shining through between the material and the try square blade indicates that the edge of the material is not straight. 2. Steel Rule A steel rule is a very accurate marking and measuring tool. The steel is thin and the markings on the rule are very fine. The measurements are in millimetres on one edge and inches on the other. The steel rule can also be used as a straight edge to check if materials or edges of materials are straight. The measurements on the steel rule go all the way to the end unlike the plastic ruler. This is because the rule may be used to measure inside pipes. It may also be used to measure diameters and circumferences of pipes and tubes accurately. The end of the rule with the measurements to the edge is called the zero end. By: Harish Gupta Page 1 3. Marking Guage The marking gauge is used on wood.It is used to mark straight lines parallel to a straight edge.The marking tool has an adjustable stock (the stock slides up and down the stem) and is set using a steel rule.
    [Show full text]
  • Aug-Sep 2012
    ssShakerhakerhaker Centennial 1912-2012 llifeife City of Shaker Heights, Ohio august september 2012 $3.50 Family Issue s Businesses s Grandparents s Integration PLUS Come Back to Shaker Weekend Window Cling Enclosed! shakeronline.com Expert care that’s in reach. And in-network. At University Hospitals Ahuja Medical Center, we understand the importance of high quality health care that’s within your network. Which is why we participate in all major medical insurance networks in the region, including: s Medical Mutual of Ohio, including SuperMed s Anthem Blue Cross and Blue Shield s United Healthcare s Aetna s CIGNA s SummaCare So you can receive the care you deserve, with the insurance coverage you need. To access a complete list of insurance networks, visit UHAhuja.org/insurance or call the Insurance Access Line at 216-963-1500. At University Hospitals, our mission is you. 3999 Richmond Road Beachwood, Ohio 44122 1-866-UH4-CARE 1-866-844-2273 contents AUGUST | SEPTEMBER 2012 features DOWN TO THE GRANDMA & GRANDPA NUTS & BOLTS 26 ARE HERE 36 Shaker’s two hardware How two Shaker families stores have much in enjoy magic of multi- common, but customer generational living. loyalty is at the top of the list. departments: City News 3 The Shaker Schools Update 11 Real Estate News 15 Library News 16 Out & About 63 Calendar of events. Advertiser Index 75 THE STRAW BUY / LUDLOW: OUR CIVIL Shaker Observer 76 BUILT TO LAST 50 RIGHTS LANDMARK 42 Teach Your A look at the past and future of Shaker’s historic school buildings. The dramatic roles played Children.
    [Show full text]
  • Beyond Basic Backsplashes Clean Cabinet Styles
    June/July 2020 The leading business, design and product resource for the kitchen & bath trade 52 PORTFOLIO • 36 Beyond Basic Backsplashes PRODUCT TREND REPORT • 42 Clean Cabinet Styles KitchenBathDesign.com WE’VE BEEN BUSY. COMING SOON BECOME A SHOWPLACE CABINETRY DEALER TODAY ShowplaceCabinetry.com click Become a Dealer | 877.607.2200 ext. 5013 | [email protected] Circle No. 1 on Product Card CONTENTS VOLUME 38 • NUMBER 6 • JUNE/JULY 2020 Photo: Eric Hausman Photo: 32 52 42 48 DEPARTMENTS COLUMNS 36 PORTFOLIO Not-so-basic Backsplashes 5 Editorial 24 Digital Media Strategies Designers discuss how they balance ‘statement making’ 6 Market Pulse by Denise Grothouse backsplashes with countertops to create cohesive 8 Barometers 26 Best Business Practices kitchen designs. 10 Consumer Buying Trends by Dan Luck 12 Industry Update 28 DPH Perspectives 42 PRODUCT TREND REPORT 21 App to Date by Thomas B. Cohn 30 Designer Profi le Painted Simplicity 32 Project Case Study Painted kitchen cabinetry stands out with contrasting accents, 34 Trend Spotting pops of bold color and features that add personalized value to the kitchen space. 60 New Products 61 Showcase/Classifi eds 61 Ad & Product Index PRODUCT REVIEW 48 62 Transformations Thoughtful Customization From creative cabinet space-maximizing solutions to smart device charging stations, designers are incorporating elements that tailor a kitchen’s functionality to homeowners’ needs. June/July 2020 ON THE COVER William Suk, AIA chose to use 52 2020 GUIDE TO APPLIANCES Pietra Gray Brown marble as both The leading business, design and product resource for the kitchen & bath trade the backsplash and countertop Leveling Up in this kitchen.
    [Show full text]
  • Laughter Therapy and Coping Strategies for Dementia Patient Caregivers
    Walden University ScholarWorks Walden Dissertations and Doctoral Studies Walden Dissertations and Doctoral Studies Collection 2020 Laughter Therapy and Coping Strategies for Dementia Patient Caregivers Edith Ugwu Walden University Follow this and additional works at: https://scholarworks.waldenu.edu/dissertations Part of the Clinical Psychology Commons This Dissertation is brought to you for free and open access by the Walden Dissertations and Doctoral Studies Collection at ScholarWorks. It has been accepted for inclusion in Walden Dissertations and Doctoral Studies by an authorized administrator of ScholarWorks. For more information, please contact [email protected]. Walden University College of Social and Behavioral Sciences This is to certify that the doctoral dissertation by Edith N. Ugwu has been found to be complete and satisfactory in all respects, and that any and all revisions required by the review committee have been made. Review Committee Dr. William Tetu, Committee Chairperson, Psychology Faculty Dr. Anne Morris, Committee Member, Psychology Faculty Dr. Alethea Baker, University Reviewer, Psychology Faculty Chief Academic Officer and Provost Sue Subocz, Ph.D. Walden University 2020 Abstract Laughter Therapy and Coping Strategies for Dementia Patient Caregivers by Edith N. Ugwu MS, State University of New York, 2002 BA, University of Nigeria, 1993 Dissertation Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy Clinical Psychology Walden University May, 2020 Abstract The purpose of this research was to address a gap in the literature concerning the experiences of dementia caregivers who use laughter therapy as a coping strategy to manage their caregiving stress. Dementia caregiving involves high levels of stress, depression, and anxiety, which can cause both psychological and physical health problems for caregivers.
    [Show full text]
  • Cabinet/Millwork (CBM) 1
    Cabinet/Millwork (CBM) 1 CBM 237 Crew Leadership (1) CABINET/MILLWORK (CBM) Using NCCER module 46101-11 the student will be introduced to the principles of leadership. Students will learn about the construction CBM 115 Design, Layout & Safety (6) industry today, business organization, team building, gender and Introduces the fundamentals of residential and commercial cabinet minority issues, communication, motivation, problem solving, decision construction. Topics include Intro to cabinetmaking, Health and Safety, making, safety, and project control. Students will be tested for possible Career Opportunities, Industry, Cabinetry Styles, Components of Design, certification. Design Decisions, Human Factors, Production decisions, Sketches, Mock- CBM 245 Cabinet Installation (5) ups and Working Drawings, Measuring, Marking and Laying out materials. This course will introduce students to the procedures for building CBM 130 Workplace Skills I (1) and installing various types of residential and commercial cabinetry. This course utilizes Key Train Software to assist in advancement of Using NCCER module 27211-13 students will receive instruction for the knowledge in Applied Math, Reading for Information, and Locating selection and installation of base, wall cabinets and counter-tops and test Information Work Keys assessments that are required prior to exiting for possible certification.Using NCCER module 27501-07 students will be the program. Students will also be required to attend seminars provided introduced to the materials, tools and methods used in cabinetmaking. through the Career Resource Center. Seminar topics include interview Practice projects are included to help trainees learn the various joining techniques, developing and preparing a resume, completing job techniques used by cabinetmakers, while providing practice on stationary applications, ethics, and teamwork.
    [Show full text]
  • LOCATOR Root Cast Coping
    www.preat.com 800-232-7732 Cast Coping Cast To Female #8924 Pilot Drill #8922 Spotface Drill #8393 Core Tool 8517 Parallel Post 8528 Cast-to Female 8519 Processing Male Cast-to Threaded Insert 8013 Castable Insert 8589 Thread in Female 9104 2.0mm Tap SINGLE-USE DEVICES • Locator Males : The inadvertent re-use of Locator nylon males could cause loss of retention for the overdenture due to wear from previous use or damage during removal with the Locator Core Tool. • Locator Abutments : The inadvertent re-use of Locator abutments could contain patient contamination build-up and subsequent wear of the retention bands. This would result in the device to perform with improper fit and function which would result in loss of retention for the prosthesis. A special Locator Cast -To Female is used for cases where a gold coping is desired to cover and protect the root surface. The following procedure is recommended. 1. The endodontic treatment is completed and the remaining tooth structure is reduced to the level of the gingiva. It is desirable that the root be prepared with a beveled shoulder or chamfer margin. 2. Set the plastic Depth Reference Ring on the Pilot Drill to a depth slightly exceeding the length of the Cast-To Female Post ( Fig 1 ). 1 2 3 3. Size the canal with the Pilot Drill ( Fig 2 ). The alignment of this initial preparation will generally follow the direction of the canal. On a non-parallel root, the resulting divergence can be corrected by using an angled LOCATOR female. Countersink the root using the Countersink ( Spotface ) Diamond Bur to a depth where a full 360º recessed seat appears on the occlusal surface of the root ( Fig 3 ).
    [Show full text]
  • Vistafix Product Catalog
    COCHLEAR™ VISTAFIX® Product Catalog A BONE ANCHORED FACIAL PROSTHETIC SOLUTION The Cochlear™ Vistafix® 3 System consists of: • Cochlear Vistafix VXI300 Implant (Vistafix 3 Implant) • Cochlear Vistafix VXA300 Abutment (Vistafix 3 Abutment) The prior generation Vistafix System consists of: • Cochlear Vistafix ST Fixtures (flangeless) • Standard abutments Contents Sterile products Vistafix 3 System 4 Sterile products Prior generation Vistafix 6 Prosthetic and lab components 8 Reusable instruments 12 Osscora surgical set and accessories 13 Compatibility of reusable instruments 14 Training equipment and accessories 15 Instrument and component guide Vistafix 3 System 16 Instrument and component guide Prior generation Vistafix 17 Retention component guide 18 Index 19 NOTE : • Images in this guide are not to scale. • Not all products are available in all markets. Product availability is subject to regulatory approval in the respective markets. Sterile products Vistafix 3 System All implants, abutments and cover screws are made of titanium. All sterile products are for single use only. Cochlear Vistafix 3 Implants Used for Vistafix one-stage or two-stage surgery. 93100 VXI300 Implant 93101 VXI300 Implant 3 mm, Ø4.5 mm 4 mm, Ø4.5 mm Cochlear Vistafix 3 Abutments The VXA300 Abutments are only compatible with VXI300 Implants. 92994 VXA300 Abutment 3.5 mm 92995 VXA300 Abutment 4.5 mm NOTE: The VXA300 Abutment screws should be tightened to 25 Ncm. 92996 VXA300 Abutment 6 mm 92997 VXA300 Abutment 7.5 mm Cochlear Vistafix 3 Healing abutment The healing abutment is used during healing and allows the clinician to selecting a final abutment height after healing has occurred, once the final tissue thickness is known.
    [Show full text]
  • COVID-19 Community Resource Guide
    From the Office of the Berkshire District Attorney Andrea Harrington COVID-19 Community Resource Guide Table of Contents Covid Updates 2 About This Guide Courts & Justice System 2 Social distancing is necessary to contain the spread of COVID-19 but can increase anxiety and stress for some. Berkshire Law Enforcement 3-4 There is help available. Use this resource guide to connect with the organizations working hard to keep you Municipal Resources 5-7 and your family healthy and safe. The circumstances MEMA 7 continue to evolve so information and services may change. Contact these service providers ahead of time Health & Medical Care 8 to ensure up-to-date information. Health Insurance Coverage 9-10 About Covid-19 Mental Health Services & Support 11-12 What is Coronavirus (AKA COVID-19)? According to the Children & Mental Health Services 13 CDC, Coronavirus disease 2019 (COVID-19) is a respiratory illness that can spread person to person. Substance Use Disorder Services & Support 13-16 Domestic Violence & Sexual Assault Support 17-18 Symptoms Child Welfare 19 Fever Child Care 20 Cough Shortness of Breath Transportation 21 Housing & Homelessness 22-23 How do I protect myself? Rent & Utilities Assistance 23 Stay home as much as possible; Maintain at least a 6 feet distance between you and Finances & Employment 24-27 non-household members; Immigration 27 Wear a mask: cover your mouth & nose with a mask when around others; Senior Supports 27 Wash your hands frequently for at least 20 seconds; Clean & disinfect frequently touched surfaces daily Disabled Persons Supports 27 (countertops, doorknobs, light switches, keyboards, Nutrition Supports 28-31 etc.); Cover your cough & sneezes with a tissue or your During public health emergencies, fear and anxiety lead to stigma toward groups of elbow.
    [Show full text]
  • Low-Iodine Cookbook by Thyca: Thyroid Cancer Survivors Association
    Handy One-Page LID Summary—Tear-Out Copy For the detailed Free Low-Iodine Cookbook with hundreds of delicious recipes, visit www.thyca.org. Key Points This is a Low-Iodine Diet (“LID”), not a “No-Iodine Diet” or an “Iodine-Free Diet.” The American Thyroid Association suggests a goal of under 50 micrograms (mcg) of iodine per day. The diet is for a short time period, usually for the 2 weeks (14 days) before a radioactive iodine scan or treatment and 1-3 days after the scan or treatment. Avoid foods and beverages that are high in iodine (>20 mcg/serving). Eat any foods and beverages low in iodine (< 5 mcg/serving). Limit the quantity of foods moderate in iodine (5-20 mcg/serving). Foods to AVOID Foods to ENJOY • Iodized salt, sea salt, and any foods containing iodized • Fruit, fresh, frozen, or jarred, salt-free and without red salt or sea salt food dye; canned in limited quantities; fruit juices • Seafood and sea products (fish, shellfish, seaweed, • Vegetables: ideally raw or frozen without salt, except seaweed tablets, calcium carbonate from oyster shells, soybeans carrageenan, agar-agar, alginate, arame, dulse, • Beans: unsalted canned, or cooked from the dry state furikake, hiziki, kelp, kombu, nori, wakame, and other • Unsalted nuts and unsalted nut butters sea-based foods or ingredients) • Egg whites • Dairy products of any kind (milk, cheese, yogurt, • Fresh meats (uncured; no added salt or brine butter, ice cream, lactose, whey, casein, etc.) solutions) up to 6 ounces a day • Egg yolks, whole eggs, or foods containing them •
    [Show full text]
  • Woodworking Notes
    Line Types Working drawings contain lots of different line types. It is important to understand what each represents on a drawing. Continuous thick Used for visible outlines and edges. Calderside Academy Continuous thin Used for projection, Technical Department dimensioning, leader lines, hatching and short centre lines. Dashed thin line. Used for hidden outlines and edges. Used for centre lines, lines Chain thin. of symmetry. Chain thin double Used for ghost outlines dash and bend lines. Practical Dimensions Woodworking The working drawings we will use in practical woodwork have three main types of dimension. Linear Dimension – the width or length of a section Radial Dimension – the radius of a curved section Diameter Dimension – the width of a circular section or hole Knowledge & Understanding in Wood Centre Lines Angluar Dimension - The angle of a component Page 48 Page Contents If we are drawing an object double its actual size (scaled up) we would put this at the bottom of the drawing informing people reading it that the object is half Page No the original size: Safety 3 What you are drawing The Object Scale 2:1 Knowledge & Understanding of Wood 7 This means that for every 2mm drawn, 1mm of the actual object has been represented Timber Supply 9 Wood types 8 Orthographic Projection Form of Supply 10 Working drawings are drawn using orthographic projection – this controls where Man-made boards 11 each view of an object goes on the page. They are drawn as shown below. The PLAN is always located above the ELEVATION and the END ELEVATION is Wood Joints 13 always located either side of the ELEVATION.
    [Show full text]