For More Than 50 Years: the System with Added Value OUR SPECIALISTS ARE THERE for YOU

Total Page:16

File Type:pdf, Size:1020Kb

For More Than 50 Years: the System with Added Value OUR SPECIALISTS ARE THERE for YOU For more than 50 years: The system with added value OUR SPECIALISTS ARE THERE FOR YOU DO YOU HAVE ANY QUESTIONS ABOUT OUR PRODUCTS OR ARE YOU SEARCHING FOR POSSIBLE SOLUTIONS SHM STEGHERR IN YOUR PRODUCTION? WE LISTEN CAREFULLY AND TAKE THE BASIS OF OUR WORK: CARE OF THE SOLUTION. HALF A CENTURY OF EXPERIENCE We have been building machines for trade and ity form the basis of our engineering services and industry since the 1960s – and we are continuous- technology. Multiplied by our passion for more ly developing them. For just as long, we have been efficient solutions, equals the potential that dealing intensively with our customers’ processes. makes our customers become regular customers - Our knowledge, experience and customer proxim- and winners in the competition. SALES & SERVICE GERMANY-AUSTRIA-SWITZERLAND SALES & PRODUCT CONSULTING ON-SITE SALES & SERVICE INTERNATIONAL SPARE PARTS INTERNATIONAL Pia Fechter Rainer Böhm Astrid Palade phone +49 9402 501 27 phone +49 9402 501 22 phone +49 9402 501 21 [email protected] [email protected] [email protected] 2 The system with added value The system with added value 3 SHM Stegherr GmbH SHM Stegherr GmbH OUR TEAM: ONE BIG ENGINE WE WILL DO IT! Many of our employees have been with the com- pany for a long time. The fluctuation tends towards zero. This testifies to a good working atmosphere - and it promotes know-how. Our people are not only competent - they are also incredibly flexible. They can respond to any special request and do it - regardless of whether it is a technical solution or transport by air freight including customs doc- uments. Our tenor is “We can do it!” Everyone is pulling together. That inspires all of us. That’s what defines us. 4 The system with added value The system with added value 5 SHM Stegherr GmbH SHM Stegherr GmbH MORE THAN A MACHINE. A SOLUTION. MACHINING OF CROSS JOINT MILLING COPING MACHINES MACHINING CENTERS SPECIAL / DRILLING, GLU INJECTION, NOTCHING MACHINES Visit our website and PROFILED BARS MACHINES CUSTOM MADE MACHINES DOWEL DRIVING learn more about our latest developments! Profile Machining Center GLS-2 Cross Joint Milling Machine KSF-2E Coping Center KF Machining Center FD-E2 Stretcher Bar Milling Machine BRF Drilling and Doweling Station DS Notching Machine NF Profile Machining Center GLS Cross Joint Milling Machine KSF-2A Coping Center KF-1 Profile Machining Center GLS-2 Double Mitre Saw BGS Machining Centers FD-E2 V-Notching Machine KSS Cross Joint Milling Machine KSF 2/4 Coping Machine KF-MINI Profile Machining Center GLS Custom Made Machines Coping Center KF Cross Joint Milling Machine KSF-MINI NC Coping Machine SKF Cross Joint Milling Machine KSF-2E Coping Center KF-1 Cross Joint Milling Machine KSF-R Copy Milling and Coping Machine KF-S 6 The system with added value The system with added value 7 SHM Stegherr GmbH SHM Stegherr GmbH MACHINING OF PROFILED BARS PRECISION AND EFFICIENCY With our machines for the processing of profiled for drilling, punching, milling and marking, we bars, profiles made of wood, aluminum, MDF and cover your complete production cycle. That’s plastic can be cut in one or two planes to precise profile processing at the highest level. angles and dimensions and processed to the cus- tomer’s requirements. With the additional units Peter Haneder Technician 8 The system with added value The system with added value 9 SHM Stegherr GmbH SHM Stegherr GmbH GLASS WOOD ALU PVC MDF 01 FIBRE PROFILE MACHINING CENTER Watch our product Window & door GLS-2 video on YouTube manufacturers THE ALLROUND-MACHINE Facades FOR ALL JOBS manufacturers The GLS-2 is the extremely efficient and top-per- FEATURES Suppliers of forming CNC-controlled allround machining center • Adjustment of the cutting angle in two planes • Suited for connection to customer‘s ERP system aluminum profiles for cutting, punching, drilling, milling and printing • Tear-free cutting of profiled bars • IoT feasible of profiled bars – semi- or fully-automated. The • Accurate milling patterns • Automatic infeed magazine Machining Center for Profiled Stock GLS-2 can pro- • Drilling, punching and milling • Customizable to over 50 different profiles duce high-quality glazing beads, door profiles, rain aggregates • Length optimization protection rails, etc. of wood, aluminum, MDF or • Completely in-house developed and • Profile fault detection PVC efficiently in series production. Flexible expan- programmed machine software • Automated, customized outfeed of sion levels allow for a perfect automation upgrade • 3 axis -CNC aggregate for operations finished profiles to fully automatic operation. from top, rear and front • Printer (label, laser or inkjet) CNC UNIT ON THE LEFT SAW UNIT ON THE RIGHT 10 The system with added value The system with added value 11 SHM Stegherr GmbH SHM Stegherr GmbH GLASS WOOD ALU PVC MDF 02 FIBRE PROFILE MACHINING CENTER Watch our product Window & door GLS video on YouTube manufacturers HIGH PRECISION, UNIVERSAL IN USE, TAILORED TO CUSTOMER NEEDS Furniture & kitchen producers The GLS is the CNC-controlled machining center for FEATURES the accurate cutting to length and machining of pro- • Adjustment of the cutting angle in one plane • IoT feasible Facades filed bars – manually, semiautomated or fully auto- • Tear-free cutting of profiled bars • Automatic infeed magazine manufacturers • Accurate milling patterns • Customizable to over 50 different profiles mated. With the Profile Machining Center GLS you can • Drilling and milling aggregates • Length optimization produce glazing beads, door profiles, rain protection • Completely in-house developed and • Profile fault detection Suppliers of rails, etc. of wood, aluminum, MDF or PVC very effi- programmed machine software • Automated, customized outfeed of aluminum profiles ciently. Flexible expansion levels allow for a perfect • Printer (label, laser or inkjet) finished profiles automation upgrade to fully automatic operation. • Suited for connection to customer‘s ERP system 12 The system with added value The system with added value 13 SHM Stegherr GmbH SHM Stegherr GmbH GLASS WOOD ALU PVC MDF 03 FIBRE V-NOTCHING MACHINE Watch our product Window & door KSS video on YouTube manufacturers WORLD LEADER IN THE PROCESSING OF GLAZING BARS Picture & stretcher bar frames Program controlled V-Notching Saw for the accurate FEATURES and high performance cutting of wood, aluminum, • 45 degree cutting angle • Automatic infeed magazine Furniture & kitchen MDF or PVC– with a fix angle V-cut, in ONE single work- • Tear-free cutting of profiled bars • Customizable to over 50 different profiles producers • Optional drilling aggregates • Length optimization ing cycle. The KSS can produce glazing beads, door • Completely in-house developed and • Profile fault detection profiles, rain protection rails, picture frames, etc. programmed machine software • Automated, customized outfeed of Facades • Printer (label, laser or inkjet) finished profiles manufacturers • Suited for connection to customer‘s ERP system • IoT feasible Suppliers of aluminum profiles 14 The system with added value The system with added value 15 SHM Stegherr GmbH SHM Stegherr GmbH CROSS JOINT MILLING MACHINES FOR EXCELLENT CROSSBAR JOINTS. WORLDWIDE. For more than 40 years we have been producing and de- that fascinate our customers and users. Conclusion: if veloping cross joint milling machines for our customers. cross-bar production is a topic for you, talk to us. That’s how we became the market leader. The secret of our excellent crossbar joints: 100% tear-free milling, four working cycles in one clamping and perfect half lap joints Arthur Schröttling Technician 16 The system with added value The system with added value 17 SHM Stegherr GmbH SHM Stegherr GmbH GLASS WOOD ALU PVC MDF 01 FIBRE CROSS JOINT MILLING MACHINE Watch our product Window & door KSF-2E video on YouTube manufacturers CROSS JOINT MILLING TECHNOLOGY FROM FEATURES Furniture & kitchen THE MARKET LEADER • Tear-free cutting of profiled bars producers • Drilling, coping and milling aggregates • Completely in-house developed and The KSF-2E is the world’s leading CNC-Special Mill- OPERATIONS programmed machine software Suppliers of ing Machine for the fully automated manufacture • Manufacture of cross joints in the most • Printer (label, laser or inkjet) aluminum profiles and complete processing of high-quality cross diverse executions and sizes • Suited for connection to customer‘s ERP system joints and grilles in the series production of glaz- • Coping of the glazing bars ends • IoT feasible ing bars windows and doors. With up to eight ag- • Cutting to length of glazing bars at different • Automatic infeed magazine • Customizable to over 50 different profiles gregates, the machine produces cross joints from angles • Cutting to length of frame profiles • Length optimization wood, aluminum, MDF or PVC bars in excellent • Drilling of fastening holes for glazing beads • Profile fault detection quality and processes all components of a glazing • Automated, customized outfeed of bar grille perfectly. finished profiles • Easy adjustment to different profile widths with the automatic height adjustment of the milling aggregates • Wireless measuring wand 18 The system with added value The system with added value 19 SHM Stegherr GmbH SHM Stegherr GmbH GLASS WOOD ALU PVC MDF 02 FIBRE CROSS JOINT MILLING MACHINE Watch our product Window & door KSF-2A video on YouTube manufacturers CROSS JOINT MILLING MACHINES MADE BY Facades SHM STEGHERR: GLOBAL LEADERS FOR GOOD manufacturers
Recommended publications
  • Securedge™ 300/3000 Series Brochure
    SecurEdge™ 300/3000 Series Engineered Commercial Roof Edge Systems Experience the Carlisle Difference In the 1960s, Carlisle SynTec Systems transformed the commercial roofi ng industry with the introduction of its Sure-Seal® EPDM single-ply membrane. Since that time, Carlisle has earned a reputation for providing the most dependable and longest-lasting single-ply roof systems on the market. Today, Carlisle’s product offering has grown to include Sure-Weld® TPO, Sure-Flex™ PVC, and FleeceBACK® membranes, as well as a full line of labor-saving accessories. Carlisle also offers edge metal, Roof Garden components, coatings, skylights, and pavers, and manufactures its own polyiso and EPS insulation, adhesives, primers, and membrane cleaners. Carlisle roofs have been installed on a wide range of buildings around the world, including schools, hospitals, warehouses, and cold-storage facilities. With more than 15 billion square feet of roofi ng materials sold and installed, Carlisle continues to lead the industry by providing innovative products, services, and warranty options. Whatever your roofi ng needs, Carlisle has a system – and a solution – for you. SELECTING THE IDEAL PERIMETER CARLISLE’S SECUREDGE EDGE SYSTEM FOR YOUR BUILDING 300/3000 PRODUCT LINE The importance of a properly designed roof edge system should not be underestimated. On average, the roof edge typically represents only 1% of a » SecurEdge 3000XT Fascia building’s overall cost. However, improper design and installation of the roof » SecurEdge 3000 Fascia edge can have catastrophic consequences. Selecting a properly designed and » SecurEdge 300 Coping tested metal edge system can diminish the risks and result in a roof system that stands the test of time.
    [Show full text]
  • Endeavour Endeavour
    ENDEAVOUR Automatic CNC drilling, drilling & band sawing, drilling & coping lines for profiles TECHNICAL CHARACTERISTICS ENDEAVOUR DRILLING MODEL 603 DD 1203 DD 2003/6 DD 2003/8 DD 2503/8 DD 2503/10 DD 3003/12 DD 603 DD LASER 1203DD LASER Web height min/max mm 80/610 80/1220 80/2030 200/2030 200/2515 200/2515 200/3000 Flange width min/max mm 10/305 10/610 10/610 75/810 75/810 100/1015 100/1200 Drill heads No. 3 3 3 3 3 3 3 092015 Advanced Agency VA Tools per spindle No. 6 6 6 6 6 6 6 Max hole diameter mm 40 40 40 40 40 40 40 Spindle power kW 31 31 31 31 31 31 31 Spindle speed rpm 5000 5000 5000 5000 5000 5000 5000 Spindle fast approach/ mt/min 30 30 30 30 20 20 20 return speed Aux. axes stroke mm 250 250 250 250 200 (opt) 200 (opt) 200 (opt) CNC axes No. 7 7 7 7 7 7 7 ENDEAVOUR - DRILLING & BAND SAWING MODEL 603 DDB 1003 DDB 1103 DDB 1203 DDB 2003/6 DDB 2003/8 DDB 2503/8 DDB Drill heads No. 3 3 3 3 3 3 3 Spindle power kW 27 27 27 27 27 27 27 Sawing capacity min.mm 60 x 10 80 x 10 80 x 10 80 x 10 200 x 10 200 200 at 90° max.mm 610 x 310 1015 x 450 1100 x 510 1250 x 610 2000 x 600 2000 2500 Blade size mm 34 x 1.1 41 x 1.3 54 x 1.6 67 x 1.6 67 x 1.6 67 x 1.6 67 x 1.6 Blade speed mt/min 150 170 170 170 170 170 170 Band saw motor kW 7 9 15 15 18 19 19 CNC axes No.
    [Show full text]
  • October 2018 Newsletter
    Canterbury Community Newsletter Canterbury Greetings Canterburians, October is filled with the celebrated offerings of all things fall in northern New England, complete with the backdrop of breathtaking reds and oranges of fall color. As part of such a lovely month, I am excited to be sharing with you an invitation to an event many have joined together to plan since we launched a similar event a year ago, and found widespread enthusiasm to build it into an ongoing offering in the greater Canterbury Community. Please consider joining us for all or a portion of this event at Shaker Village at the end of this month: ”Sharing Practices of the Spirit at Canterbury Shaker Village” Everyone is welcomed to a special event at the Shaker Village on Sunday, October 28: a day for exploring spiritual practices from a variety of beliefs, traditions and ways to gather, share, and celebrate our deepest connections. The event is co-sponsored by Canterbury Shaker Village, the Canterbury United Community Church, the Concord Quaker Meeting, and the Church of the Woods / Kairos Earth. The day’s activities are free, family-friendly and run from 8 a.m. to 2 p.m. Highlights of the day include a variety of workshop offerings, children’s activities, a joint ecumenical worship service, a potluck lunch and a send-off gathering. Offerings collected during the service will benefit the Canterbury Fund. Two sets of workshops, one at 9 and the other at 11:15, will offer opportunities to engage your sense of spirituality through nature, contemplation, song and movement. Here are your options (weather permitting!) at the two times: 9 am: Yoga; a Thomas Merton Contemplative Walk; and Songs of the Spirit.
    [Show full text]
  • Introduction to Carpentry Tools and Joints
    INTRODUCTION TO CARPENTRY TOOLS 1. Try Square 2. Steel Rule 3. Marking Guage 4. Coping Saw 5. Tenon Saw 6. Penon Saw 7. Ironjack Plane 8. Benchwise 1. Try Square This is used to mark lines at 90 degrees to a straight edge. It is used to mark out lines square to the face edge and face side. It may also be used to check if edges are straight. If the try square is placed on the edge of the material and held up to a light, any light shining through between the material and the try square blade indicates that the edge of the material is not straight. 2. Steel Rule A steel rule is a very accurate marking and measuring tool. The steel is thin and the markings on the rule are very fine. The measurements are in millimetres on one edge and inches on the other. The steel rule can also be used as a straight edge to check if materials or edges of materials are straight. The measurements on the steel rule go all the way to the end unlike the plastic ruler. This is because the rule may be used to measure inside pipes. It may also be used to measure diameters and circumferences of pipes and tubes accurately. The end of the rule with the measurements to the edge is called the zero end. By: Harish Gupta Page 1 3. Marking Guage The marking gauge is used on wood.It is used to mark straight lines parallel to a straight edge.The marking tool has an adjustable stock (the stock slides up and down the stem) and is set using a steel rule.
    [Show full text]
  • Aug-Sep 2012
    ssShakerhakerhaker Centennial 1912-2012 llifeife City of Shaker Heights, Ohio august september 2012 $3.50 Family Issue s Businesses s Grandparents s Integration PLUS Come Back to Shaker Weekend Window Cling Enclosed! shakeronline.com Expert care that’s in reach. And in-network. At University Hospitals Ahuja Medical Center, we understand the importance of high quality health care that’s within your network. Which is why we participate in all major medical insurance networks in the region, including: s Medical Mutual of Ohio, including SuperMed s Anthem Blue Cross and Blue Shield s United Healthcare s Aetna s CIGNA s SummaCare So you can receive the care you deserve, with the insurance coverage you need. To access a complete list of insurance networks, visit UHAhuja.org/insurance or call the Insurance Access Line at 216-963-1500. At University Hospitals, our mission is you. 3999 Richmond Road Beachwood, Ohio 44122 1-866-UH4-CARE 1-866-844-2273 contents AUGUST | SEPTEMBER 2012 features DOWN TO THE GRANDMA & GRANDPA NUTS & BOLTS 26 ARE HERE 36 Shaker’s two hardware How two Shaker families stores have much in enjoy magic of multi- common, but customer generational living. loyalty is at the top of the list. departments: City News 3 The Shaker Schools Update 11 Real Estate News 15 Library News 16 Out & About 63 Calendar of events. Advertiser Index 75 THE STRAW BUY / LUDLOW: OUR CIVIL Shaker Observer 76 BUILT TO LAST 50 RIGHTS LANDMARK 42 Teach Your A look at the past and future of Shaker’s historic school buildings. The dramatic roles played Children.
    [Show full text]
  • Beyond Basic Backsplashes Clean Cabinet Styles
    June/July 2020 The leading business, design and product resource for the kitchen & bath trade 52 PORTFOLIO • 36 Beyond Basic Backsplashes PRODUCT TREND REPORT • 42 Clean Cabinet Styles KitchenBathDesign.com WE’VE BEEN BUSY. COMING SOON BECOME A SHOWPLACE CABINETRY DEALER TODAY ShowplaceCabinetry.com click Become a Dealer | 877.607.2200 ext. 5013 | [email protected] Circle No. 1 on Product Card CONTENTS VOLUME 38 • NUMBER 6 • JUNE/JULY 2020 Photo: Eric Hausman Photo: 32 52 42 48 DEPARTMENTS COLUMNS 36 PORTFOLIO Not-so-basic Backsplashes 5 Editorial 24 Digital Media Strategies Designers discuss how they balance ‘statement making’ 6 Market Pulse by Denise Grothouse backsplashes with countertops to create cohesive 8 Barometers 26 Best Business Practices kitchen designs. 10 Consumer Buying Trends by Dan Luck 12 Industry Update 28 DPH Perspectives 42 PRODUCT TREND REPORT 21 App to Date by Thomas B. Cohn 30 Designer Profi le Painted Simplicity 32 Project Case Study Painted kitchen cabinetry stands out with contrasting accents, 34 Trend Spotting pops of bold color and features that add personalized value to the kitchen space. 60 New Products 61 Showcase/Classifi eds 61 Ad & Product Index PRODUCT REVIEW 48 62 Transformations Thoughtful Customization From creative cabinet space-maximizing solutions to smart device charging stations, designers are incorporating elements that tailor a kitchen’s functionality to homeowners’ needs. June/July 2020 ON THE COVER William Suk, AIA chose to use 52 2020 GUIDE TO APPLIANCES Pietra Gray Brown marble as both The leading business, design and product resource for the kitchen & bath trade the backsplash and countertop Leveling Up in this kitchen.
    [Show full text]
  • Laughter Therapy and Coping Strategies for Dementia Patient Caregivers
    Walden University ScholarWorks Walden Dissertations and Doctoral Studies Walden Dissertations and Doctoral Studies Collection 2020 Laughter Therapy and Coping Strategies for Dementia Patient Caregivers Edith Ugwu Walden University Follow this and additional works at: https://scholarworks.waldenu.edu/dissertations Part of the Clinical Psychology Commons This Dissertation is brought to you for free and open access by the Walden Dissertations and Doctoral Studies Collection at ScholarWorks. It has been accepted for inclusion in Walden Dissertations and Doctoral Studies by an authorized administrator of ScholarWorks. For more information, please contact [email protected]. Walden University College of Social and Behavioral Sciences This is to certify that the doctoral dissertation by Edith N. Ugwu has been found to be complete and satisfactory in all respects, and that any and all revisions required by the review committee have been made. Review Committee Dr. William Tetu, Committee Chairperson, Psychology Faculty Dr. Anne Morris, Committee Member, Psychology Faculty Dr. Alethea Baker, University Reviewer, Psychology Faculty Chief Academic Officer and Provost Sue Subocz, Ph.D. Walden University 2020 Abstract Laughter Therapy and Coping Strategies for Dementia Patient Caregivers by Edith N. Ugwu MS, State University of New York, 2002 BA, University of Nigeria, 1993 Dissertation Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy Clinical Psychology Walden University May, 2020 Abstract The purpose of this research was to address a gap in the literature concerning the experiences of dementia caregivers who use laughter therapy as a coping strategy to manage their caregiving stress. Dementia caregiving involves high levels of stress, depression, and anxiety, which can cause both psychological and physical health problems for caregivers.
    [Show full text]
  • Cabinet/Millwork (CBM) 1
    Cabinet/Millwork (CBM) 1 CBM 237 Crew Leadership (1) CABINET/MILLWORK (CBM) Using NCCER module 46101-11 the student will be introduced to the principles of leadership. Students will learn about the construction CBM 115 Design, Layout & Safety (6) industry today, business organization, team building, gender and Introduces the fundamentals of residential and commercial cabinet minority issues, communication, motivation, problem solving, decision construction. Topics include Intro to cabinetmaking, Health and Safety, making, safety, and project control. Students will be tested for possible Career Opportunities, Industry, Cabinetry Styles, Components of Design, certification. Design Decisions, Human Factors, Production decisions, Sketches, Mock- CBM 245 Cabinet Installation (5) ups and Working Drawings, Measuring, Marking and Laying out materials. This course will introduce students to the procedures for building CBM 130 Workplace Skills I (1) and installing various types of residential and commercial cabinetry. This course utilizes Key Train Software to assist in advancement of Using NCCER module 27211-13 students will receive instruction for the knowledge in Applied Math, Reading for Information, and Locating selection and installation of base, wall cabinets and counter-tops and test Information Work Keys assessments that are required prior to exiting for possible certification.Using NCCER module 27501-07 students will be the program. Students will also be required to attend seminars provided introduced to the materials, tools and methods used in cabinetmaking. through the Career Resource Center. Seminar topics include interview Practice projects are included to help trainees learn the various joining techniques, developing and preparing a resume, completing job techniques used by cabinetmakers, while providing practice on stationary applications, ethics, and teamwork.
    [Show full text]
  • LOCATOR Root Cast Coping
    www.preat.com 800-232-7732 Cast Coping Cast To Female #8924 Pilot Drill #8922 Spotface Drill #8393 Core Tool 8517 Parallel Post 8528 Cast-to Female 8519 Processing Male Cast-to Threaded Insert 8013 Castable Insert 8589 Thread in Female 9104 2.0mm Tap SINGLE-USE DEVICES • Locator Males : The inadvertent re-use of Locator nylon males could cause loss of retention for the overdenture due to wear from previous use or damage during removal with the Locator Core Tool. • Locator Abutments : The inadvertent re-use of Locator abutments could contain patient contamination build-up and subsequent wear of the retention bands. This would result in the device to perform with improper fit and function which would result in loss of retention for the prosthesis. A special Locator Cast -To Female is used for cases where a gold coping is desired to cover and protect the root surface. The following procedure is recommended. 1. The endodontic treatment is completed and the remaining tooth structure is reduced to the level of the gingiva. It is desirable that the root be prepared with a beveled shoulder or chamfer margin. 2. Set the plastic Depth Reference Ring on the Pilot Drill to a depth slightly exceeding the length of the Cast-To Female Post ( Fig 1 ). 1 2 3 3. Size the canal with the Pilot Drill ( Fig 2 ). The alignment of this initial preparation will generally follow the direction of the canal. On a non-parallel root, the resulting divergence can be corrected by using an angled LOCATOR female. Countersink the root using the Countersink ( Spotface ) Diamond Bur to a depth where a full 360º recessed seat appears on the occlusal surface of the root ( Fig 3 ).
    [Show full text]
  • Vistafix Product Catalog
    COCHLEAR™ VISTAFIX® Product Catalog A BONE ANCHORED FACIAL PROSTHETIC SOLUTION The Cochlear™ Vistafix® 3 System consists of: • Cochlear Vistafix VXI300 Implant (Vistafix 3 Implant) • Cochlear Vistafix VXA300 Abutment (Vistafix 3 Abutment) The prior generation Vistafix System consists of: • Cochlear Vistafix ST Fixtures (flangeless) • Standard abutments Contents Sterile products Vistafix 3 System 4 Sterile products Prior generation Vistafix 6 Prosthetic and lab components 8 Reusable instruments 12 Osscora surgical set and accessories 13 Compatibility of reusable instruments 14 Training equipment and accessories 15 Instrument and component guide Vistafix 3 System 16 Instrument and component guide Prior generation Vistafix 17 Retention component guide 18 Index 19 NOTE : • Images in this guide are not to scale. • Not all products are available in all markets. Product availability is subject to regulatory approval in the respective markets. Sterile products Vistafix 3 System All implants, abutments and cover screws are made of titanium. All sterile products are for single use only. Cochlear Vistafix 3 Implants Used for Vistafix one-stage or two-stage surgery. 93100 VXI300 Implant 93101 VXI300 Implant 3 mm, Ø4.5 mm 4 mm, Ø4.5 mm Cochlear Vistafix 3 Abutments The VXA300 Abutments are only compatible with VXI300 Implants. 92994 VXA300 Abutment 3.5 mm 92995 VXA300 Abutment 4.5 mm NOTE: The VXA300 Abutment screws should be tightened to 25 Ncm. 92996 VXA300 Abutment 6 mm 92997 VXA300 Abutment 7.5 mm Cochlear Vistafix 3 Healing abutment The healing abutment is used during healing and allows the clinician to selecting a final abutment height after healing has occurred, once the final tissue thickness is known.
    [Show full text]
  • COVID-19 Community Resource Guide
    From the Office of the Berkshire District Attorney Andrea Harrington COVID-19 Community Resource Guide Table of Contents Covid Updates 2 About This Guide Courts & Justice System 2 Social distancing is necessary to contain the spread of COVID-19 but can increase anxiety and stress for some. Berkshire Law Enforcement 3-4 There is help available. Use this resource guide to connect with the organizations working hard to keep you Municipal Resources 5-7 and your family healthy and safe. The circumstances MEMA 7 continue to evolve so information and services may change. Contact these service providers ahead of time Health & Medical Care 8 to ensure up-to-date information. Health Insurance Coverage 9-10 About Covid-19 Mental Health Services & Support 11-12 What is Coronavirus (AKA COVID-19)? According to the Children & Mental Health Services 13 CDC, Coronavirus disease 2019 (COVID-19) is a respiratory illness that can spread person to person. Substance Use Disorder Services & Support 13-16 Domestic Violence & Sexual Assault Support 17-18 Symptoms Child Welfare 19 Fever Child Care 20 Cough Shortness of Breath Transportation 21 Housing & Homelessness 22-23 How do I protect myself? Rent & Utilities Assistance 23 Stay home as much as possible; Maintain at least a 6 feet distance between you and Finances & Employment 24-27 non-household members; Immigration 27 Wear a mask: cover your mouth & nose with a mask when around others; Senior Supports 27 Wash your hands frequently for at least 20 seconds; Clean & disinfect frequently touched surfaces daily Disabled Persons Supports 27 (countertops, doorknobs, light switches, keyboards, Nutrition Supports 28-31 etc.); Cover your cough & sneezes with a tissue or your During public health emergencies, fear and anxiety lead to stigma toward groups of elbow.
    [Show full text]
  • Low-Iodine Cookbook by Thyca: Thyroid Cancer Survivors Association
    Handy One-Page LID Summary—Tear-Out Copy For the detailed Free Low-Iodine Cookbook with hundreds of delicious recipes, visit www.thyca.org. Key Points This is a Low-Iodine Diet (“LID”), not a “No-Iodine Diet” or an “Iodine-Free Diet.” The American Thyroid Association suggests a goal of under 50 micrograms (mcg) of iodine per day. The diet is for a short time period, usually for the 2 weeks (14 days) before a radioactive iodine scan or treatment and 1-3 days after the scan or treatment. Avoid foods and beverages that are high in iodine (>20 mcg/serving). Eat any foods and beverages low in iodine (< 5 mcg/serving). Limit the quantity of foods moderate in iodine (5-20 mcg/serving). Foods to AVOID Foods to ENJOY • Iodized salt, sea salt, and any foods containing iodized • Fruit, fresh, frozen, or jarred, salt-free and without red salt or sea salt food dye; canned in limited quantities; fruit juices • Seafood and sea products (fish, shellfish, seaweed, • Vegetables: ideally raw or frozen without salt, except seaweed tablets, calcium carbonate from oyster shells, soybeans carrageenan, agar-agar, alginate, arame, dulse, • Beans: unsalted canned, or cooked from the dry state furikake, hiziki, kelp, kombu, nori, wakame, and other • Unsalted nuts and unsalted nut butters sea-based foods or ingredients) • Egg whites • Dairy products of any kind (milk, cheese, yogurt, • Fresh meats (uncured; no added salt or brine butter, ice cream, lactose, whey, casein, etc.) solutions) up to 6 ounces a day • Egg yolks, whole eggs, or foods containing them •
    [Show full text]