AccuPyc Bibliography of Peer-Reviewed Papers 2013 TITLE AUTHORS & PUBLICATION CITATION

A methodological approach for determining ..was determined using helium pycnometry (Helium AccuPyc 1330, Micromeritics, the effect of moisture content on the Wade, J.B. / Martin, G.P. / Long, D.F., Powder Norcross, Georgia, USA). The instrument was...a nitrogen adsorption method Technology, 246, p.511-519, Sep 2013 compaction properties of powders: Granular (TriStar 3000, Micromeritics, Norcross, Georgia, USA). Samples were outgassed... hydroxyapatite A methodological approach for determining ..using helium pycnometry (Helium AccuPyc 1330, Micromeritics, Norcross, Georgia, the effect of moisture content on the Wade, J.B. / Martin, G.P. / Long, D.F., Powder USA). The instrument was...measured using a nitrogen adsorption method (TriStar Technology, 246, p.511-519, Sep 2013 compaction properties of powders: Granular 3000, Micromeritics, Norcross, Georgia, USA). Samples were outgassed... hydroxyapatite Lucas, Romain / Pizon, David / Laborde, Etienne / ..carbide powder, laser granulometry analyses were performed (AccuPyc II 1340, A simple route for organic covalent grafting Trolliard, Gilles / Foucaud, Sylvie / Maître, Micrometrics France S.A. Verneuil Halatte...measured thanks to the gas adsorption onto zirconium carbide particles Alexandre, Applied Surface Science, In Press, method (ASAP 2010, Micromeritics France S.A., Verneuil Halatte, France). Samples Corrected Proof,Oct 2013 (450... ..was evaluated, taking into account a reference measurement without sample. Kunowsky, Mirko / Suárez-García, Fabián / Adsorbent density impact on gas storage True densities were measured in a Micromeritics Accupyc 1330 pycnometer. Before Linares-Solano, Ángel, Microporous and every measurement the samples were degassed at 393 K into vacuum for at least 4 capacities Mesoporous Materials, 173, p.47-52, Jun 2013 h, and... Adsorption kinetics of herbicide paraquat in ... of total pore volume and true density. g Measured by the helium-displacement WT Tsai, HR Chen - International Journal of method using an AccuPyc 1340 pycnometer (Micromeritics Co., USA ... purity of aqueous solution onto a low-cost adsorbent, Environmental Science and … - Springer minimum 87.0 %) were immediately made with a 1.0 cm light path quartz cell in a swine-manure-derived biochar spectrophotometer (Hitachi U-2900) at λ

An experimental and numerical study of Thakur, Subhash C. / Ahmadian, Hossein / Sun, ..and mercury porosimetry. A gas pycnometer, Accupyc II 1340 (Micromeritics, packing, compression, and caking behaviour Jin / Ooi, Jin Y., Particuology, In Press, Corrected USA), was used to measure skeletal density...conducted using mercury porosimetry of detergent powders Proof,Sep 2013 (AutoPore IV, Micromeritics, USA). The instrument provides a wide range...

An experimental and numerical study of Thakur, Subhash C. / Ahmadian, Hossein / Sun, ..porosimetry. A gas pycnometer, Accupyc II 1340 (Micromeritics, USA), was used to packing, compression, and caking behaviour Jin / Ooi, Jin Y., Particuology, In Press, Corrected measure skeletal density...samples was conducted using mercury porosimetry of detergent powders Proof,Sep 2013 (AutoPore IV, Micromeritics, USA). The instrument provides a wide range... Anacardium occidentale L. leaves extraction via SFE: Global yields, extraction kinetics, Leitão, N.C.M.C.S. / Prado, G.H.C. / Veggi, P.C. / ..32 (4.1%), and 48 (27%). The real density of the particles was measured using Meireles, M.A.A. / Pereira, C.G., The Journal of helium picnometry (Micromeritics, AccuPyc II 1340, Norcross, USA) by Analytical mathematical modeling and economic Supercritical Fluids, 78, p.114-123, Jun 2013 Facilities of the Institute of Chemistry (IQ/Unicamp). The apparent... evaluation Romagnoli, Marcello / Lassinantti Gualtieri, ..density ( ρ t ) of the dried starting powder was determined using a gas Anisotropy of green stoneware evaluated by Magdalena / Gualtieri, Alessandro F. / Šliteris, displacement pycnometer instrument (AccuPyc 1330, Micromeritics Inc., USA). Reimondas / Kažys, Rymantas / Tari, Giuliano, ultrasound measurements in combination Total porosity ( TP ) was calculated according to 23 : (1) T P = 1 − ρ ρ t × 100 Journal of the European Ceramic Society, 33 (13- with texture analyses Porosimetry... 14), p.2785-2792, Nov 2013 TITLE AUTHORS & PUBLICATION CITATION

Romagnoli, Marcello / Lassinantti Gualtieri, ..a gas displacement pycnometer instrument (AccuPyc 1330, Micromeritics Inc., Anisotropy of green stoneware evaluated by Magdalena / Gualtieri, Alessandro F. / Šliteris, USA). Total porosity ( TP ) was calculated according...ρ ρ t × 100 Porosimetry data Reimondas / Kažys, Rymantas / Tari, Giuliano, ultrasound measurements in combination were collected using an Autopore IV 9500 scanning mercury porosimeter. The Journal of the European Ceramic Society, 33 (13- with texture analyses contact angle... 14), p.2785-2792, Nov 2013 Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3− δ (BSCF) Salehi, Mehdi / Pfaff, Ewald M. / Junior, Roberto feedstock development and optimization for Morkis / Bergmann, Carlos P. / Diethelm, Stefan / ..the powders were measured by He-pycnometer (Micromeritics, AccuPyc 1330, Neururer, Christoph / Graule, Thomas / (...) / Jörg USA). 2.2 Feedstock preparation...of the same feedstock using He-pycnometer thermoplastic forming of thin planar and Clemens, Frank, Journal of Membrane Science, (Micromeritics, AccuPyc 1330, USA). The rheology of the feedstocks... tubular oxygen separation membranes 443, p.237-245, Sep 2013 Behaviour of a bauxite waste material as Mendiara, T. / de Diego, L.F. / García-Labiano, F. / ..measured by Hg intrusion in a Quantachrome PoreMaster 33. The skeletal density Gayán, P. / Abad, A. / Adánez, J., International of the particles was measured with a Micromeritics AccuPyc II 1340 helium oxygen carrier in a 500 W th CLC unit with Journal of Greenhouse Gas Control, 17, p.170- picnometer. Brunauer–Emmett–Teller (BET) surface area value was measured and a coal 182, Sep 2013 low value... ..microscope (SEM; Hitachi S-4300). The densities of the green composites were Samal, Sneha / Cho, Sunghwan / Kim, Hyungsun, Bimodal distribution of filler on viscosity and calculated by using a pycnometer (Micromeritics, Accupyc II 1340). The Ceramics International, 39 (2), p.1659-1666, Mar crystallization phases of the green and fired composites were analyzed using XRD thermal expansion of glass composites 2013 techniques...

Bone marrow absorption and retention Oh, Daniel S. / Hyuk Kim, Yoon / Ganbat, Danaa / ..micro-CT (SkyScan 1172), mechanical testing (5848 Instron MicroTester), and properties of engineered scaffolds with Han, Myung-Ho / Lim, Phillip / Back, Jung-Ho / helium pycnometry (porosity: AccuPyc II 1340 micromeritics). We had three scaffold Lee, Francis Y. / Tawfeek, Hesham, Ceramics micro-channels and nano-pores for tissue groups based on their average macro-pore sizes (450 um, 320 um, and 200 um... International, 39 (7), p.8401-8410, Sep 2013 engineering: A proof of concept

Boron nitride nanotubes reinforced Lahiri, Debrupa / Hadjikhani, Ali / Zhang, Cheng / ..reactivity of Al with BNNT. The density of the sintered pellets was measured using aluminum composites prepared by spark Xing, Tan / Li, Lu Hua / Chen, Ying / Agarwal, helium gas pycnometry (Accupyc 1340, Micromeretics Instrument Corporation, plasma sintering: Microstructure, mechanical Arvind, Materials Science and Engineering: A, Norcross, GA, USA) and expressed in terms of relative density, while calculating the 574, p.149-156, Jul 2013 true density... properties and deformation behavior

Bubbling fluidization of biomass and sand Oliveira, T.J.P. / Cardoso, C.R. / Ataíde, C.H., ..true density [14] . Therefore, the materials were oven-dried at 105 °C for 24 h binary mixtures: Minimum fluidization Chemical Engineering and Processing: Process before the analyses. A Micromeritics AccuPyc 1331 gas pycnometer with a velocity and particle segregation Intensification, 72, p.113-121, Oct 2013 measuring sensitivity of 10 −4 g/cm 3 was used to infer the true density of the... Bianco, Stefano / Tewes, Frederic / Tajber, Lidia / Bulk, surface properties and water uptake ..Jaoczuk, 2010 ). 2.9 Density measurements The density of spray dried ST and STNa Caron, Vincent / Corrigan, Owen I. / Healy, Anne was measured by an Accupyc 1330 Pycnometer (Micromeritics ® ) using helium mechanisms of salt/acid amorphous Marie, International Journal of Pharmaceutics, (99.995% purity) to determine the volume of the sample. Samples were dried prior... composite systems 456 (1), p.143-152, Nov 2013 ..pycnometry using an Accupyc II 1340 (Micromeritics) automatic apparatus. For Carbon meringues derived from flavonoid Szczurek, A. / Fierro, V. / Pizzi, A. / Stauber, M. / that purpose...at −196 °C using an ASAP 2020 (Micromeritics) automatic apparatus. tannins Celzard, A., Carbon, 65, p.214-227, Dec 2013 All the samples...determined by mercury intrusion, using an AutoPore IV 9500 (Micrometrics) porosimeter... TITLE AUTHORS & PUBLICATION CITATION

..was estimated by helium pycnometry using an Accupyc II 1340 (Micromeritics) Carbon meringues derived from flavonoid Szczurek, A. / Fierro, V. / Pizzi, A. / Stauber, M. / automatic apparatus. For that purpose, all samples...adsorption at −196 °C using an Celzard, A., Carbon, 65, p.214-227, Dec 2013 tannins ASAP 2020 (Micromeritics) automatic apparatus. All the samples were...

Carbonate-containing apatite (CAP) synthesis Pham Minh, Doan / Tran, Ngoc Dung / Nzihou, ..P°) of 0.03 to 0.99. True density of the solid powders was measured by helium under moderate conditions starting from Ange / Sharrock, Patrick, Materials Science and pycnometry using an Accupyc 1330 (Micromeritics). Scanning electron microscopy calcium carbonate and orthophosphoric acid Engineering: C, 33 (5), p.2971-2980, Jul 2013 (SEM) was measured on a Philips XL30 ESEM apparatus (FEI Company). Particle...

Carbonisation of resorcinol–formaldehyde Moreno, A.H. / Arenillas, A. / Calvo, E.G. / ..The adsorption analysis was carried out with a Micromeritics Tristar 3020, for the organic xerogels: Effect of temperature, Bermúdez, J.M. / Menéndez, J.A., Journal of study of microporosity and...densities of the RF carbon xerogels were measured in a Analytical and Applied Pyrolysis, 100, p.111-116, particle size and heating rate on the porosity Micromeritics AccuPyc 1340 Pycnometer. Before measuring the helium density... Mar 2013 of carbon xerogels Gutierrez-Gonzalez, C.F. / Agouram, S. / Ceramic/metal nanocomposites by ..characterize the powders obtained. The density of the powders was determined by Torrecillas, R. / Moya, J.S. / Lopez-Esteban, S., using a Helium Pycnometer ( AccuPyc 1330 , Micromeritics France S.A. ). X-ray lyophilization: Spark plasma sintering and Ceramics International, In Press, Corrected diffraction analysis of the powders at different stages of the different processing... hardness Proof,Sep 2013 Paul, Neepa / Biggs, Simon / Edmondson, ..modification. 2.2 Particle characterisation Particle density was measured using the Characterising highly active nuclear waste Michael / Hunter, Timothy N. / Hammond, Micrometrics AccuPyc 1330 helium pycnometer (Micromeritics Instrument simulants Robert B., Chemical Engineering Research and Corporation, US). The input weight of the solids were measured, the density is Design, 91 (4), p.742-751, Apr 2013 determined... Agrawal, Anjali M. / Dudhedia, Mayur S. / Patel, Characterization and performance ..5.12 True density of dispersions The true density of milled solid dispersions Ashwinkumar D. / Raikes, Michelle S., powder was determined using Micromeritics AccuPyc 1330 Gas pycnometer S/N- assessment of solid dispersions prepared by International Journal of Pharmaceutics, 457 (1), 4011 (Norcross, GA). Calibration was performed prior to each run. Sample was... hot melt extrusion and spray drying process p.71-81, Nov 2013 ..cases (data not shown). Bulk density was determined via an AccuPyc II 1340 gas ∼ Characterization of a gluten reference Alvarez, Pedro A. / Mongeon, Vanessa J. / Boye, pycnometer using helium at 23 °C, 100 cm 3 sample chamber, and 30 g sample Joyce I., Journal of Cereal Science, 57 (3), p.418- material: Wheat-contaminated oats 423, May 2013

size (Micromeritics Instruments Corp., Norcross, GA). Moisture of flours was...

Dekeyrel, Alixe / Dourges, Marie-Anne / Characterization of carbon/carbon ..determined by helium pycnometry using an AccuPyc 1340 pycnometer Weisbecker, Patrick / Pailler, René / Allemand, composites prepared by different processing manufactured by Micromeritics. Apparent densities were obtained Alexandre / Ténèze, Nicolas / Epherre, Jean- from...characterized by mercury intrusion porosimetry (Micromeritics Autopore IV) routes including liquid pitch densification François, Composites Part A: Applied Science and for pre-densified preforms... process Manufacturing, 49, p.81-88, Jun 2013 TITLE AUTHORS & PUBLICATION CITATION

Dekeyrel, Alixe / Dourges, Marie-Anne / Characterization of carbon/carbon ..using an AccuPyc 1340 pycnometer manufactured by Micromeritics. Apparent Weisbecker, Patrick / Pailler, René / Allemand, composites prepared by different processing densities were obtained from weight...characterized by mercury intrusion Alexandre / Ténèze, Nicolas / Epherre, Jean- porosimetry (Micromeritics Autopore IV) for pre-densified preforms. routes including liquid pitch densification François, Composites Part A: Applied Science and Microstructures... process Manufacturing, 49, p.81-88, Jun 2013 Characterization of dynamics in complex lyophilized formulations: II. Analysis of Chieng, Norman / Cicerone, Marcus T. / Zhong, ..2.1 Density The densities of the freeze-dried samples were obtained using a helium density variations in terms of glass dynamics Qin / Liu, Ming / Pikal, Michael J., European pycnometer (AccuPyc 1330 Gas Pycnometer, Micromeritics Instruments and comparisons with global mobility, fast Journal of Pharmaceutics and Biopharmaceutics, Corporation, Norcross, USA), which was described previously [19] . In order to 85 (2), p.197-206, Oct 2013 prevent... dynamics, and Positron Annihilation Lifetime Spectroscopy (PALS)

Characterization of laminar extrudates Oliveira, G. / Wahl, M.A. / Pinto, J.F., ..extrudates (at 0, 1, 2, 3, 7, 10 and 20 days after production) were determined in a manufactured at room temperature in the International Journal of Pharmaceutics, 454 (1), helium pycnometer (AccuPyc 1330, Micromeritics, USA) at room temperature (23 absence of solvents for the delivery of drugs p.90-98, Sep 2013 °C) ( n = 3). The expected densities of the extrudates were calculated...

Characterization of polyurethane networks Fridrihsone, Anda / Stirna, Uldis / Lazdiņa, Brigita ..min −1 . The density of PU films was determined by using gas picnometry. The gas structure and properties based on rapeseed / Misāne, Marija / Vilsone, Dzintra, European pycnometer Micromeritics AccuPyc II 1340 from Micromeritics was used. 2.6 oil derived polyol Polymer Journal, 49 (6), p.1204-1214, Jun 2013 Calculations of structure parameters Functionality is the second most important... Characterization of the porosity in TRISO Bari, Klaudio / Osarinmwian, Charles / López- ..linear diffusion 4-noded DC3D4 element was employed as a mesh element type in Honorato, Eddie / Abram, Timothy J., Nuclear Abaqus. Helium gas pycnometry (Micromeritics, AccuPyc II 1340) was used to coated fuel particles and its effect on the Engineering and Design, 265, p.668-674, Dec measure the absolute density of the TRISO particles and the total pore volume of relative thermal diffusivity 2013 the OPyC... Chitosan macroporous foams obtained in Miras, Jonathan / Vílchez, Susana / Solans, ..kV. 2.6.2 Helium pycnometry Matrix or skeletal density of macroporous foams was Conxita / Esquena, Jordi, Journal of Colloid and determined using a Helium Micromeritics AccuPyc 1330 pycnometer. The average highly concentrated emulsions as templates Interface Science, 410, p.33-42, Nov 2013 density was calculated by means of the measurement of four replicas. The total... ..volume calculated from these experiments. In addition to these experiments the Chromatographic separation of wood model Westerberg, Niklas / Rasmuson, Anders, solid density was measured using a Micromeritics Accupyc 1330 pycnometer. From Chemical Engineering Research and Design, In constituents - Mathematical modeling and the solid density the total porosity of the column could be derived if the mass of Press, Accepted Manuscript,Oct 2013 parameter estimation the...... Densities of the 1-methoxy-5-nitroiminotetrazole salts were determined at 25 °C CiteEnergetic salts based on 1-methoxy-5- YH Joo, JH Chung, SG Cho, EM Goh - New Journal by employing a Micromeritics AccuPyc 1340 gas pycnometer. ... Raman (532 nm, 50 of Chemistry, 2013 - pubs.rsc.org nitroiminotetrazole mW) ν/cm −1 3319, 3248, 3017, 2950, 1509, 1309, 1292, 1092, 1025, 967.

Comparative study of the nano-composite Khan, M. Ajmal / Raza, Rizwan / Lima, Raquel. B. ..respectively. The prepared electrolytes materials are 90% dense which was electrolytes based on samaria-doped ceria / Chaudhry, M. Asharf / Ahmed, E. / Abbas, measured with He-pycnometry (AccuPyc 1340 Micromeritics, USA). The TGA curves Ghazanfar, International Journal of Hydrogen for low temperature solid oxide fuel cells (LT- of the SDC: M 2 CO 3 (M = Na, Li, K) nanocomposite electrolytes are presented... Energy, In Press, Corrected Proof,Jun 2013 SOFCs) TITLE AUTHORS & PUBLICATION CITATION

Comparison of a xenogeneic and an Figueiredo, Andreia / Coimbra, Patrícia / Cabrita, ..mercury intrusion porosimetry (Poresizer 9320, Micromeritics Instrument Corp., alloplastic material used in dental implants in António / Guerra, Fernando / Figueiredo, Norcross...pycnometry (Accupyc 1330, Micromeritics Instrument Corp.), Margarida, Materials Science and Engineering: C, terms of physico-chemical characteristics and using...adsorption technique (ASAP 2000, Micromeritics Instrument... 33 (6), p.3506-3513, Aug 2013 in vivo inflammatory response

Comparison of a xenogeneic and an Figueiredo, Andreia / Coimbra, Patrícia / Cabrita, ..porosimetry (Poresizer 9320, Micromeritics Instrument Corp...determined by gas alloplastic material used in dental implants in António / Guerra, Fernando / Figueiredo, pycnometry (Accupyc 1330, Micromeritics Instrument Corp.), using...adsorption Margarida, Materials Science and Engineering: C, terms of physico-chemical characteristics and technique (ASAP 2000, Micromeritics Instrument Corp.) using... 33 (6), p.3506-3513, Aug 2013 in vivo inflammatory response Compressibility and dissolution Zea, Lai Pei / Yusof, Yus Aniza / Aziz, Mohammad ..Carr index [12] . The Hausner ratio and Carr index were used to calculate Gulzarul / Ling, Chin Nyuk / Amin, Nor Amaiza flowability. A gas pycnometer (AccuPyc II 1340, Micromeritics, Norcross, USA) was characteristics of mixed fruit tablets made Mohd, Powder Technology, 247, p.112-119, Oct used to determine the absolute density. The particle size of the guava and the from guava and pitaya fruit powders 2013 pitaya... Compression Prediction Accuracy From Small Pitt, Kendal G. / Hill, Rachael J. Webbera / Kirsty ..3 Density measurements The true density of the compression blends was A. / Dey, Dipankar / J.Gamlen, Michael, Powder measured using helium pycnometry (Accupyc 1330, Micromeritics Instrument Scale Compaction Studies To Production Technology, In Press, Accepted Manuscript,Oct Corporation, U.S.A.). 3 Results and Discussion 3.1 Direct compression formulation Presses 2013 The... ..using Eq. (5) with an assumption of the particle shape factor in 1 and with a Concentration and particle size distribution Wang-Li, Lingjuan / Cao, Zihan / Li, Qianfeng / particle density of 1.48 g/cm 3 measured by an AccuPyc 1330 Pycnometer. b Liu, Zifei / Beasley, David B., Atmospheric of particulate matter inside tunnel-ventilated Average of three replicates from TSP samples taken by three co-located TSP Environment, 66, p.8-16, Feb 2013 high-rise layer operation houses samplers. c Average of two replicates... Jankovid, B. / Škarabot, M. / Lavrič, Z. / Ilid, I. / ..In addition, the true density of powdered Clar forms was measured in triplicate Consolidation trend design based on Young's Muševič, I. / Srčič, S. / Planinšek, O., International with a helium pycnometer (AccuPyc 1330, Micromeritics, Norcross, GA, USA). Journal of Pharmaceutics, 454 (1), p.324-332, Sep modulus of clarithromycin single crystals Compressibility was evaluated using “in-die” Heckel analysis ( Heckel, 1961... 2013 Her, Goh Jih / Wu, Hsi-Chin / Chen, Ming-Hong / Control of three-dimensional substrate ..replicates. For porosity analysis, three replicates from each group of scaffolds were Chen, Ming-Yi / Chang, Shun-Chih / Wang, Tzu- measured by using AccuPyc 1330 Pycnometer (Micromeritics, USA). The porosity of stiffness to manipulate mesenchymal stem Wei, Acta Biomaterialia, 9 (2), p.5170-5180, Feb scaffolds was calculated with the following equation: (1) Porosity of scaffolds... cell fate toward neuronal or glial lineages 2013

Controlling electron injection and electron ..vis) spectroscopy using a 6705 JENWAY spectrometer. The density of the TiO 2 Massihi, N. / Mohammadi, M.R. / Bakhshayesh, transport of dye-sensitized solar cells aided nanostructures was measured by a Micromeritics AccuPyc 1330 pycnometer A.M. / Abdi-Jalebi, M., Electrochimica Acta, 111, analyzer. Photovoltaic measurements were carried out using a solar simulator under by incorporating CNTs into a Cr-doped TiO 2 p.921-929, Nov 2013 standard test... photoanode Correlation between processing conditions, Makongo, Julien P.A. / Zhou, Xiaoyuan / Misra, ..13] . Densities of loose powders and pressed pellets were respectively obtained by Dinesh K. / Uher, Ctirad / Poudeu, Pierre F.P., He gas pycnometry using a Micromeritics Accupyc II 1340 and by geometrical microstructure and charge transport in half- Journal of Solid State Chemistry, 201, p.280-287, measurements using a digital micrometer. The relative packing densities for all Heusler alloys May 2013 pellets... TITLE AUTHORS & PUBLICATION CITATION

Correlation of microstructure and thermal Weigold, Lena / Mohite, Dhairyashil P. / Mahadik- ..the skeletal density ( ρ solid ), via Eq. (1) . Skeletal density was obtained by helium conductivity in nanoporous solids: The case Khanolkar, Shruti / Leventis, Nicholas / pycnometry using a Micromeritics AccuPyc II 1340 instrument. Before analysis, Reichenauer, Gudrun, Journal of Non-Crystalline of polyurea aerogels synthesized from an samples were degassed for 48 h at 80 °C and then stored under vacuum in... Solids, 368, p.105-111, May 2013 aliphatic tri-isocyanate and water Coupled concentration-dependent ..200±15 μm with a membrane density of 1.090±0.051 g/cm 3 measured using the diffusivities of ethanol/water mixtures Yang, Tzu-Huai / Lue, Shingjiang Jessie, Journal of pycnometer (model Accupyc II 1340, Micromeritics Inc. Co., Norcross, Georgia, Membrane Science, 443, p.1-9, Sep 2013 through a polymeric membrane: Effect on USA). The characterization of the PDMS membrane has been shown in previous... pervaporative flux and diffusivity profiles ... Elmer, model Clarus 500, with column type Rxi®-17, 30 mx 0.25 mm x 0.25 µm). Decontamination of metals and polycyclic S Bisone, G Mercier, JF Blais - Environmental 10 The soil density was measured by a Micromeritics AccuPyc 1330 Pycnometer aromatic hydrocarbons from slag-polluted soil Technology, 2013 - Taylor & Francis using dry soil 11 samples of approximately 20–25 g. 12 Techno-economic evaluation 13 ... E-mail: [email protected] III Professor, Santa Catarina State University. Deep subsoiling of a subsurface-compacted JC Medeiros, GC Figueiredo, ÁL Mafra… - Revista Av. Luiz de Camões, 2900. CEP 88520-000 Lages (SC), Brazil. ... The particle density typical hapludult under citrus orchard Brasileira de …, 2013 - SciELO Brasil was evaluated using a helium pycnometer (ACCUPYC 130, Micromeritics Instrument Corporation TM , USA). Deformation properties of pharmaceutical Ilid, Ilija / Govedarica, Biljana / Šibanc, Rok / Dreu, ..Greifensee, Switzerland). True density of tableting mixtures was determined with a excipients determined using an in-die and Rok / Srčič, Stane, International Journal of helium pycnometer (AccuPyc 1330, Micromeritics, Norcross, GA, USA). out-die method Pharmaceutics, 446 (1-2), p.6-15, Mar 2013 Compressibility was determined using both in-die and out-die Heckel and Walker... Tasseroul, Ludivine / Lambert, Stéphanie D. / Eskenazi, David / Amoura, Makhlouf / Páez, ..in KBr (0.6 wt.% for all samples). Apparent densities, ρ app , were measured by Degradation of p -nitrophenol and bacteria with TiO 2 xerogels Carlos A. / Hiligsmann, Serge / Thonart, Philippe / helium pycnometry on a Micromeritics AccuPyc 1330 device. The pore texture of sensitized in situ with tetra( 4 -carboxyphenyl)porphyrins Heinrichs, Benoît, Journal of Photochemistry and the xerogels was examined by nitrogen adsorption–desorption measurements... Photobiology A: Chemistry, 272, p.90-99, Nov 2013 Design of ceramic paste formulations for co- Powell, Jonathan / Assabumrungrat, Suttichai / ..binder made according to the formulation given in Table 1 was measured using a Blackburn, Stuart, Powder Technology, 245, p.21- constant volume pycnometer (Accupyc 1330, Micromeritics, UK) and was found to extrusion 27, Sep 2013 be 1835 kg.m − 3 . This indicates that the constituents, PVB, DBP and stearic... ..the ASAP2020M instrument (Micromeritics, USA) by two Determination of texture and transport Soukup, K. / Hejtmánek, V. / Petráš, D. / Šolcová, independent...AUTOPORE III instrument (Micromeritics, USA) were used for O., Colloids and Surfaces A: Physicochemical and characteristics of electrospun nanofibrous determination...He was determined on the AccuPyc 1920 instrument Engineering Aspects, 437, p.133-140, Nov 2013 mats (Micromeritics, USA) and porosity ɛ... ..the ASAP2020M instrument (Micromeritics, USA) by two Determination of texture and transport Soukup, K. / Hejtmánek, V. / Petráš, D. / Šolcová, independent...porosimetry performed on AUTOPORE III instrument (Micromeritics, O., Colloids and Surfaces A: Physicochemical and characteristics of electrospun nanofibrous USA) were used for determination...AccuPyc 1920 instrument (Micromeritics, USA) Engineering Aspects, 437, p.133-140, Nov 2013 mats and porosity ɛ... TITLE AUTHORS & PUBLICATION CITATION

Determination of the reaction rate Awoh, Akué Sylvette / Mbonimpa, Mamert / ..distribution measurements are given by Merkus (2009) . The relative density of coefficient of sulphide mine tailings Bussière, Bruno, Journal of Environmental tailings was determined using a Micromeritics Accupyc 1330 helium pycnometer deposited under water Management, 128, p.1023-1032, Oct 2013 (the accuracy is to within 0.03% of reading plus 0.03% of nominal full-scale sample...

Economical production of PVDF-g-POEM for Moghareh Abed, M.R. / Kumbharkar, S.C. / ..in DMSO-d 6 . The density of the PVDF powder and the synthesised copolymer was use as a blend in preparation of PVDF based Groth, A.M. / Li, K., Separation and Purification measured using a pycnometer (Micromeritics Accupyc 1330, Bedfordshire, UK). The hydrophilic hollow fibre membranes Technology, 106, p.47-55, Mar 2013 molecular weights of the synthesised copolymer and pure PVDF were determined... Villeneuve, Sébastien / Des Marchais, Louis- ..cups for bulk density measurement. True density was determined in triplicate with Effect of flaxseed processing on engineering Philippe / Gauvreau, Vanessa / Mercier, Samuel / a Helium Gas Pycnometer (AccuPyc II 1340, Micromeritics, Norcross, GA, USA). The properties and fatty acids profiles of pasta Do, Chi Bao / Arcand, Yves, Food and Bioproducts 1000-grain weight was determined in triplicate according to method ASBC Barley- Processing, 91 (3), p.183-191, Jul 2013 2D...

Effect of operational parameters and stress Ohenoja, Katja / Illikainen, Mirja / Niinimäki, ..The filling ratio of the grinding media was kept constant at 70 vol.%. 2.3 Analysis A energies on the particle size distribution of Jouko, Powder Technology, 234, p.91-96, Jan gas pycnometer (Micromeritics AccuPyc II 1340) was used to measure the densities TiO 2 pigment in stirred media milling 2013 of the grinding beads, and a Beckman Coulter LS 13 320 particle size...

Effect of petroleum (pet) coke addition on Olmeda, J. / Sánchez de Rojas, M.I. / Frías, M. / ..Pet coke has a density of approximately 1350 kg/m 3 when measured at 26 ± 2 °C the density and thermal conductivity of Donatello, S. / Cheeseman, C.R., Fuel, 107, p.138- by He picnometry (model Micromeritics Accupyc 1330) and this is much lower than cement pastes and mortars 146, May 2013 that of the hydrated cement paste matrix (1900 kg/m 3 ). At 30% addition... Pomázi, Anita / Buttini, Francesca / Ambrus, Rita Effect of polymers for aerolization properties ..parameters: 300RF lens; small volume dispersion unit (1000 rpm); true density of / Colombo, Paolo / Szabó-Révész, Piroska, MX = 1.565 g cm −3 (AccuPyc 1330, Micromeritics, Norcross, USA); 1.596 was taken of mannitol-based microcomposites European Polymer Journal, 49 (9), p.2518-2527, as the refractive index for dispersed particles and 1.330 for the dispersion... containing meloxicam Sep 2013 ..84 µm and σ g =1.31. The particle density of the PS-DVB microspheres measured Effect of silica nanoparticles on the bulk flow Kojima, Takehiro / Elliott, James A., Chemical by a gas pycnometer (Accupyc 1330, Micromeritics, USA) was 1070 kg m −3 . The Engineering Science, 101, p.315-328, Sep 2013 properties of fine cohesive powders size distribution of PS-DVB microspheres is very similar to those of the...

Effect of temperature on thermochemical Tsai, Wen-Tien / Liu, Sii-Chew, Journal of ..very small molecule size (about 0.2 nm). A helium displacement method with a property and true density of torrefied coffee Analytical and Applied Pyrolysis, 102, p.47-52, Jul pycnometer (Micromeritics Co., U.S.A.; Model No.: AccuPyc 1340) was used to residue 2013 measure the true density of the torrefied sample in this work. Although the... ..was measured by means of helium pycnometry in a Micromeritics Accupyc 1330 Effect of the addition of waste sawdust on Montiano, M.G. / Barriocanal, C. / Alvarez, R., Pycnometer. Their apparent density ( ρ Hg ) was determined with mercury at 0.1 Fuel, 106, p.537-543, Apr 2013 thermoplastic properties of a coal MPa in a Micromeritics autopore IV 9500 mercury porosimeter. From the...

..was measured by means of helium pycnometry in a Micromeritics Accupyc 1330 Effect of the addition of waste sawdust on Montiano, M.G. / Barriocanal, C. / Alvarez, R., Pycnometer. Their apparent density...was determined with mercury at 0.1 MPa in a Fuel, 106, p.537-543, Apr 2013 thermoplastic properties of a coal Micromeritics autopore IV 9500 mercury porosimeter. From the true and... TITLE AUTHORS & PUBLICATION CITATION

Effects of lubricant on green strength, Enneti, Ravi K. / Lusin, Adam / Kumar, Sumeet / ..procedure [25] using an Arnold meter. The actual density was measured by helium compressibility and ejection of parts in die German, Randall M. / Atre, Sundar V., Powder pycnometry (Model: Accupyc 1330, Vendor: Micromeritics) and the flowability was compaction process Technology, 233, p.22-29, Jan 2013 measured by a Hall flow meter [26] . The properties of the powders used in... ..theor = 2 M 2 I O + M II O + 2 M IV O 2 P 2 O 5 − 1 Glass density was measured Morikawa, Hiroshi / Lee, Sungho / Kasuga, Effects of magnesium for calcium using a helium pycnometer (AccuPyc 1330-1000, Micromeritics GmbH, Aachen, Toshihiro / Brauer, Delia S., Journal of Non- Germany); the estimated error limits are ± 0.01 g cm − 3 . Oxygen density was substitution in P 2 O 5 –CaO–TiO 2 glasses Crystalline Solids, 380, p.53-59, Nov 2013 calculated... Efficiently trapping asphaltene-type materials ... The true densities of extracts were tested on a full-automatic true density type L Bai, Y Nie, J Huang, Y Li, H Dong, X Zhang - Fuel, analyzer AccuPycII1340 (Micromeritics, America) at room temperature. ... The from direct coal liquefaction residue using 2013 - Elsevier bands near 2920 cm −1 and 2855 cm −1 are due to aliphatic C H stretching alkylsulfate-based ionic liquids vibrations, which indicated that these extracts ..porosity level is significantly higher in the low purity material. The density was Electrical monitoring of crack propagation Oberg, E.K. / Dunleavy, C.S. / Bourke, P. / Clyne, measured by He-Pycnometry, using a Micro Meritics AccuPyc 1330, and by T.W., Journal of the European Ceramic Society, during quasi-static loading and ballistic hydrostatic weighing in liquid C 11 H 20 . The Young's modulus (assumed isotropic) 33 (13-14), p.2663-2675, Nov 2013 impact of alumina plates was estimated... Elemental distribution, solute solubility and T Riedl / A Kirchner / K Eymann / A Shariq / R ..Pore areas were evaluated with standard image-analysis software. Density Schlesiger / G Schmitz / M Ruhnow / B Kieback , measurements were accomplished with a Micromeritics Accupyc 1330 He gas defect free volume in nanocrystalline Journal of Physics: Condensed Matter, 25 (11), pycnometer. For phase and strain analysis, x-ray diffraction (XRD) using a Bruker D8 restricted-equilibrium Cu–Ag alloys p.115401, Mar 2013 Discover...

Elevated Pressure CO 2 Adsorption Li, Shuang / Shi, Yixiang / Yang, Yi / Cai, ..determined by true density and tap density in our calculation, where the true Characteristics of K-promoted Hydrotalcites Ningsheng, Energy Procedia, 37, p.2224-2231, density is measured by a pycnometer (Micromeritics, AccuPyc 1330). Thus, we take for Pre-combustion Carbon Capture Jan 2013 the true density instead of particle density, and calculation porosity cal instead of...

ENERGETIC SALTS: DEGRADATION AND ... 3]. 2.2 Densities, Solubility and Melting Points of UN and NU Ten density S Vadlamannati - 2013 - digitalcommons.uri.edu determinations for UN and NU products were obtained using a Micromeritics TRANSFORMATION AccuPyc 1340 gas pycnometer. For each determination a sample cup (1.0 Equilibrium and kinetic studies on acid dye Konicki, Wojciech / Sibera, Daniel / Mijowska, ..by the Brunauer–Emmett–Teller (BET) method using the equipment Gemini 2360 Ewa / Lendzion-Bieluo, Zofia / Narkiewicz, of Micromeritics. The helium pycnometer AccuPyc 1330 of Micromeritics was Acid Red 88 adsorption by magnetic ZnFe 2 O Urszula, Journal of Colloid and Interface Science, applied to determine the density of powders. The functional groups on the MNZnFe 4 spinel ferrite nanoparticles 398, p.152-160, May 2013 surface... Equilibrium and kinetic studies on acid dye Konicki, Wojciech / Sibera, Daniel / Mijowska, ..determined by the Brunauer–Emmett–Teller (BET) method using the equipment Ewa / Lendzion-Bieluo, Zofia / Narkiewicz, Gemini 2360 of Micromeritics. The helium pycnometer AccuPyc 1330 of Acid Red 88 adsorption by magnetic ZnFe 2 O Urszula, Journal of Colloid and Interface Science, Micromeritics was applied to determine the density of powders. The functional 4 spinel ferrite nanoparticles 398, p.152-160, May 2013 groups on the MNZnFe...

Evaluation of mechanical and physical Moubarik, Amine / Mansouri, Hamid Reza / Pizzi, ..by measuring the mass and volume, while material density of the board was properties of industrial particleboard bonded Antonio / Allal, Ahmed / Charrier, Fatima / Badia, measured with a Helium Pycnometer Accupyc 1330 (Micromeritics, USA). Porosity with a corn flour–urea formaldehyde Miguel Angel / Charrier, Bertrand, Composites was given by Rahman equation *23,24+ : e = 1 - ρ ap ρ m where e , ρ ap and ρ m Part B: Engineering, 44 (1), p.48-51, Jan 2013 are... adhesive TITLE AUTHORS & PUBLICATION CITATION

Evaluation on Properties of CaO–BaO–B 2 O 3 Heydari, Fatemeh / Maghsoudipour, Amir / ..method (ASTM.C474-88) and powder density of the samples was measured with a –Al 2 O 3 –SiO 2 Glass–Ceramic Sealants for Hamnabard, Zohreh / Farhangdoust, Sajad, helium gas pycnometer (model Accupyc 1330, Micromeritics, Norcross, GA). The Intermediate Temperature Solid Oxide Fuel Journal of Materials Science & Technology, 29 relative density of the sintered specimens was determined by dividing bulk density (1), p.49-54, Jan 2013 by... Cells

Expansion of nanosized pores in low- Okada, Masahiro / Fujiwara, Keiko / Uehira, ..mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics Instrument Corp., crystallinity nanoparticle-assembled plates Mayo / Matsumoto, Naoyuki / Takeda, Shoji, Norcross, GA), after the...samples were determined using helium pycnometry Journal of Colloid and Interface Science, 405, via a thermally induced increase in solid-state (AccuPyc 1330; Micromeritics Instrument Corp.), after the samples were ground... p.58-63, Sep 2013 density

Expansion of nanosized pores in low- Okada, Masahiro / Fujiwara, Keiko / Uehira, ..determined using mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics crystallinity nanoparticle-assembled plates Mayo / Matsumoto, Naoyuki / Takeda, Shoji, Instrument Corp., Norcross, GA), after the...determined using helium pycnometry Journal of Colloid and Interface Science, 405, via a thermally induced increase in solid-state (AccuPyc 1330; Micromeritics Instrument Corp.), after the samples were... p.58-63, Sep 2013 density ..of 40 pebbles with a diameter of 1 mm. The material density of the pebbles was Knitter, R. / Kolb, M.H.H. / Kaufmann, U. / Fabrication of modified lithium orthosilicate measured by He pycnometry (AccuPyc 1330, Micromeritics) and the closed porosity Goraieb, A.A., Journal of Nuclear Materials, 442 was calculated by considering the theoretical density of each composition. 3 pebbles by addition of titania (1-3 Supplement 1), p.S433-S436, Nov 2013 Results... Fabrication of the carbon paper by wet-laying Kim, Hyunuk / Lee, Young-Ju / Lee, Dong-Chul / ..ozone-treated CFs determined using helium pycnometry with a Micromeritics of ozone-treated carbon fibers with Park, Gu-Gon / Yoo, Yoonjong, Carbon, 60, p.429- AccuPyc II 1340 instrument is 1.93...mercury intrusion porosimetry (AutoPore IV hydrophilic functional groups 436, Aug 2013 9500, Micromeritics). The CP from ozone-treated CFs showed higher...

Fabrication of the carbon paper by wet-laying Kim, Hyunuk / Lee, Young-Ju / Lee, Dong-Chul / ..CFs determined using helium pycnometry with a Micromeritics AccuPyc II 1340 of ozone-treated carbon fibers with Park, Gu-Gon / Yoo, Yoonjong, Carbon, 60, p.429- instrument is...was measured by mercury intrusion porosimetry (AutoPore IV 9500, hydrophilic functional groups 436, Aug 2013 Micromeritics). The CP from ozone-treated CFs showed higher...

Facile fabrication of Pickering emulsion Kim, Young Jae / Liu, Ying Dan / Choi, Hyoung Jin ..lower than that of pure laponite clay. On the other hand, the density measured polymerized polystyrene/laponite composite / Park, Soo-Jin, Journal of Colloid and Interface using a gas pyconometer (AccuPyc 1330, Micromeritics Instrucments Co., USA) was nanoparticles and their electrorheology Science, 394, p.108-114, Mar 2013 1.19 g cm −3 , which is similar to the calculated density from the TGA analysis...

..and nanofillers are reported in Table 1 . Density measurements were performed at Dorigato, Andrea / Dzenis, Yuris / Pegoretti, Filler aggregation as a reinforcement ambient temperature by using a Micromeritics Accupyc® 1330 helium pycnometer, Alessandro, Mechanics of Materials, 61, p.79-90, while surface area and porosity measurements were conducted by using an ASAP® mechanism in polymer nanocomposites Jul 2013 2010...

Flow and mixing efficiency characterisation in Common, Audrey / Rodier, Elisabeth / Sauceau, ..defined by: (13) S p i c = ∫ 0 ∞ I ( t ) d t 3.5 Sample characterisation Water and a CO2-assisted single-screw extrusion process Martial / Fages, Jacques, Chemical Engineering helium pycnometry (Micromeritics, AccuPYC 1330) were used to determine Research and Design, In Press, Accepted by residence time distribution using Raman respectively, overall and closed porosity. The characterization of the porosity... Manuscript,Oct 2013 spectroscopy TITLE AUTHORS & PUBLICATION CITATION

Fluidized bed agglomeration of skim milk Turchiuli, Christelle / Smail, Ramdane / ..2 mm (5 min) (density tester, Varian, Fr). Particle true density was measured with powder: Analysis of sampling for the follow- Dumoulin, Elisabeth, Powder Technology, 238, an air pycnometer (Accupyc, Micromeretics, Fr). Flowability was estimated from the up of agglomerate growth p.161-168, Apr 2013 Carr and Hausner indexes (Carr index = ρ tapped /ρ bulk ; Hausner index... ..and cooling in the same Perkin Elmer TGA7 system under magnetic force. Density Zhou, Chen / Pinkerton, Frederick E. / Herbst, Jan Formation of TbCu 7 -type CeFe 10 Zr 0.8 by was measured on powders using a Micromeritics AccuPyc II gas pycnometer. X-ray F., Journal of Alloys and Compounds, 569, p.6-8, diffraction patterns for the as-spun and annealed samples were collected in a rapid solidification Aug 2013 Rigaku...

Formulation of bioadhesive ..density of the pellets The true density of the pellet formulations was determined Hiorth, Marianne / Liereng, Linda / Reinertsen, hexylaminolevulinate pellets intended for with a helium gas pycnometer (AccuPyc 1330, Micromeritics Instrument Reidun / Tho, Ingunn, International Journal of Corporation, Norcross, GA, USA). Reported results were the mean of three photodynamic therapy in the treatment of Pharmaceutics, 441 (1-2), p.544-554, Jan 2013 independent experiments... cervical cancer Ben Youssef, Ismaïl / Alem, Halima / Sarry, Functional poly(urethane-imide)s containing Frédéric / Elmazria, Omar / Jimenez Rioboo, ..PTFE plate, small polymer disks were cut using a sharp die. Density measurements Lewis bases for SO 2 detection by Love Rafael / Arnal-Hérault, Carole / Jonquières, Anne, were carried out with a helium Micromeritics AccuPyc 1330 gas pycnometer using surface acoustic wave gas micro-sensors Sensors and Actuators B: Chemical, 185, p.309- ca. 300 mg of pieces of polymeric films (film thickness: ca. 40 μm). Thermal... 320, Aug 2013 Schafföner, Stefan / Aneziris, Christos G. / Berek, ..and the solid state synthesized CaZrO 3 were investigated regarding the true Fused calcium zirconate for refractory Harry / Hubálková, Jana / Priese, Angelika, density in a helium pycnometer (Accupyc 1330, Micromeritics GmbH, Aachen, applications Journal of the European Ceramic Society, 33 (15- Germany) according to the standard DIN 66137-2. In a next step test cylinders (50 16), p.3411-3418, Dec 2013 mm...

Glass formation, physicochemical ..C for 8 h and cooled down in the annealing furnace. The density was determined Nouadji, M. / Ivanova, Z.G. / Poulain, M. / characterization and photoluminescence using a helium picnometer (Micromeritics, AccuPyc 1330), with ±0.001 g/cm 3 Zavadil, J. / Attaf, A., Journal of Alloys and accuracy. The microhardness values were taken by Matzuzawa MXT 70 digital properties of new Sb 2 O 3 –PbO–ZnO and Sb Compounds, 549, p.158-162, Feb 2013 microhardness... 2 O 3 –PbO–ZnS systems Ait Atmane, Kahina / Zighem, Fatih / Soumare, High temperature structural and magnetic Yaghoub / Ibrahim, Mona / Boubekri, Rym / ..respectively 0.26 g and 2.13 g cm –3 . The true density of the powder, obtained at Maurer, Thomas / Margueritat, Jérémie / (...) / 298 K using a helium Accupyc 1330 pycnometer from Micromeritics, was found to properties of cobalt nanorods Viau, Guillaume, Journal of Solid State Chemistry, be 6.76±0.41 g cm –3 . The packing factor, defined as the ratio of the volume... 197, p.297-303, Jan 2013 Smolen, Dariusz / Chudoba, Tadeusz / Malka, Highly biocompatible, nanocrystalline Iwona / Kedzierska, Aleksandra / Lojkowski, ..performed using a helium pycnometer (AccuPyc, model 1330; Micromeritics, hydroxyapatite synthesized in a solvothermal Witold / Swieszkowski, Wojciech / Kurzydlowski, Gosford, Australia) using an in-house...powders was measured by the BET method process driven by high energy density Krzysztof Jan / (...) / Lewandowska-Szumiel, (AccuPyc, model Gemini 2360; Micromeritics). The average diameter of the Małgorzata, International Journal of particles... microwave radiation Nanomedicine, 8, p.653-668, Jan 2013 TITLE AUTHORS & PUBLICATION CITATION

Smolen, Dariusz / Chudoba, Tadeusz / Malka, Highly biocompatible, nanocrystalline Iwona / Kedzierska, Aleksandra / Lojkowski, ..using a helium pycnometer (AccuPyc, model 1330; Micromeritics, Gosford, hydroxyapatite synthesized in a solvothermal Witold / Swieszkowski, Wojciech / Kurzydlowski, Australia) using an in-house procedure...was measured by the BET method process driven by high energy density Krzysztof Jan / (...) / Lewandowska-Szumiel, (AccuPyc, model Gemini 2360; Micromeritics). The average diameter of the particles Małgorzata, International Journal of was... microwave radiation Nanomedicine, 8, p.653-668, Jan 2013 Braghiroli, F.L. / Fierro, V. / Izquierdo, M.T. / ..3 ), was measured by helium pycnometry (Accupyc II 1340, Micromeritics, USA) for HydrSothermal treatment kinetics of tannin Parmentier, J. / Pizzi, A. / Celzard, A., Bioresource all samples after HTC. Samples were...determined by krypton adsorption at -196°C Technology, In Press, Accepted Manuscript,Oct for producing carbonaceous microspheres using a Micromeritics ASAP 2020 automatic apparatus. Samples were... 2013 Huang, Yunjie / Li, Qingfeng / Anfimova, Tatiana ..SEM) measurements were performed on a Carl Zeiss EVO MA10 microscope. The V. / Christensen, Erik / Yin, Min / Jensen, Jens Indium doped niobium phosphates as density of powder was measured by Micromeritics AccuPyc 1330. 2.2.2 Conductivity Oluf / Bjerrum, Niels J. / Xing, Wei, International measurement For conductivity measurements, the phosphate powders were first intermediate temperature proton conductors Journal of Hydrogen Energy, 38 (5), p.2464-2470, pressed... Feb 2013 Krueger, Cornelia / Thommes, Markus / ..6 Porosity, shrinking The helium density ( ρ He ) of the pellets was determined by a Influence of MCC II fraction and storage Kleinebudde, Peter, European Journal of helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany). For Pharmaceutics and Biopharmaceutics, In Press, conditions on pellet properties each tested pellet batch, three samples were analyzed. The apparent density... Corrected Proof,Jul 2013

Influence of Ni nanoparticle addition and Birkel, Christina S. / Douglas, Jason E. / Lettiere, ..molar heat capacity, C p = 3 R , were utilized. Densities were obtained on the same spark plasma sintering on the TiNiSn–Ni Bethany R. / Seward, Gareth / Zhang, Yichi / pieces using a pycnometer (Micromeritics AccuPyc 1330 Pycnometer) and were Pollock, Tresa M. / Seshadri, Ram / Stucky, Galen system: Structure, microstructure, and found to be ≥99% of the theoretical density. For microstructural investigations... D., Solid State Sciences, 26, p.16-22, Dec 2013 thermoelectric properties Bricout, Julien / Gelin, Jean-Claude / Ablitzer, ..13,320 particle size analyser), pycnometer density (obtained by with Micromeritics Influence of powder characteristics on the Carine / Matheron, Pierre / Brothier, Meryl, AccuPyc II 1340), the Specific surface area (obtained by Micromeritics ASAP2020), Chemical Engineering Research and Design, In behaviour of PIM feedstock and the apparent and tap density (NF EN ISO 3953). Scanning Electron... Press, Corrected Proof,Mar 2013

Influence of process parameters and Sprunk, Angela / Page, Susanne / Kleinebudde, ..density ( ρ ), determined by AccuPyc 1330 V3.03 (Micromeritics, USA), tablet equipment on dry foam formulation Peter, International Journal of Pharmaceutics, volume ( V...analysis using a SmartPrep (Micromeritics, USA). The adsorbed properties using indomethacin as model drug 455 (1-2), p.189-196, Oct 2013 amount...using a Gemini 2375 V4.02 (Micromeritics, USA). SSA was calculated...

Influence of process parameters and Sprunk, Angela / Page, Susanne / Kleinebudde, ..by AccuPyc 1330 V3.03 (Micromeritics, USA), tablet volume ( V...analysis using a equipment on dry foam formulation Peter, International Journal of Pharmaceutics, SmartPrep (Micromeritics, USA). The adsorbed amount...p 0 in duplicates using a properties using indomethacin as model drug 455 (1-2), p.189-196, Oct 2013 Gemini 2375 V4.02 (Micromeritics, USA). SSA was calculated... TITLE AUTHORS & PUBLICATION CITATION

Influence of the membrane treatment on Delhorbe, Virginie / Cailleteau, Céline / Chikh, ..thicknesses of the dry and wet membranes, respectively. Density measurements structure and properties of sulfonated Linda / Guillermo, Armel / Gebel, Gérard / Morin, were performed with a Accupyc II 1340 gas pycnometer from Micromeritics. All poly(etheretherketone) semi- Arnaud / Fichet, Odile, Journal of Membrane samples were dried 12 h at 40 °C under vacuum prior to measurements. Pulse Field Science, 427, p.283-292, Jan 2013 Gradient... interpenetrating polymer network

Influence of thermoplastic properties on ..coke samples (approximately 0.2 g) using a Micromeritics Autopore IV Duffy, John J. / Scholes, Oliver / Mahoney, coking pressure generation: Part 3 – Evidence Porosimeter. Tests were performed...pycnometry Helium pycnometry was Merrick R. / Steel, Karen M., Fuel, 103, p.711- performed using a Micromeritics Accupyc 1330 Pycnometer with 10 cm 3 sample and role of pore coalescence in the 718, Jan 2013 holder. Prior... mechanism for pressure generation

Influence of thermoplastic properties on ..coke samples (approximately 0.2 g) using a Micromeritics Autopore IV Duffy, John J. / Scholes, Oliver / Mahoney, coking pressure generation: Part 3 – Evidence Porosimeter. Tests were performed in two...pycnometry Helium pycnometry was Merrick R. / Steel, Karen M., Fuel, 103, p.711- performed using a Micromeritics Accupyc 1330 Pycnometer with 10 cm 3 sample and role of pore coalescence in the 718, Jan 2013 holder... mechanism for pressure generation ..density method ( Rahman, 2009 ). The true volume of freeze dried steamed bun Huang, Shih-Rong / Yang, Jing-Iong / Lee, Yeun- Interactions of heat and mass transfer in was measured by using the AccuPyc 1340 Pyconmeter (Micromeritics, Georgia) and Chung, Journal of Food Engineering, 114 (2), helium was used as a displaced fluid to ensure the best accuracy. Water was steam reheating of starchy foods p.174-182, Jan 2013 assumed... Sun, Hongfang / Hohl, Brian / Cao, Yizheng / Jet mill grinding of portland cement, ..32] . Methanol was used as a dispersant. The densities required for PSD calculation Handwerker, Carol / Rushing, Todd S. / Cummins, were measured by a Micromeritics Accupyc 1330 pycnometer. All mortars were limestone, and fly ash: Impact on particle Toney K. / Weiss, Jason, Cement and Concrete prepared in a Hobart mixer following ASTM C 305. After casting, the specimens... size, hydration rate, and strength Composites, 44, p.41-49, Nov 2013

Zocca, Andrea / Gomes, Cynthia M. / Bernardo, ..saturated and suspended mass, while the density of the crystallized powder was LAS glass–ceramic scaffolds by three- Enrico / Müller, Ralf / Günster, Jens / Colombo, measured with a pycnometer (AccuPyc 1340, Micromeritics Italia, Milano, Italy). 3 Paolo, Journal of the European Ceramic Society, dimensional printing Results and discussion 3.1 Characterization of the glass–ceramic powder... 33 (9), p.1525-1533, Aug 2013 Grishechko, L.I. / Amaral-Labat, G. / Szczurek, A. / ..Envelope Density Analyser (Micromeritics, USA). A quantity of DryFlo...was Lignin–phenol–formaldehyde aerogels and Fierro, V. / Kuznetsov, B.N. / Celzard, A., measured with an Accupyc II 1340 helium pycnometer (Micromeritics, USA). For cryogels Microporous and Mesoporous Materials, 168, avoiding errors related...adsorption apparatus (Micromeritics, USA). The samples p.19-29, Mar 2013 were... Local microarchitecture affects mechanical Pilia, M. / Guda, T. / Pollot, B. / Aguero, V. / ..volume fraction of the scaffold. True solid volumes of the scaffolds were measured Appleford, M., Materials Science and using helium pycnometry (AccuPyc 1340, Micromeritics, Norcross, GA). The length properties of deposited extracellular matrix Engineering: C, In Press, Accepted and diameter of each scaffold were measured by averaging across three for osteonal regeneration Manuscript,Oct 2013 independent... Mattsson, Tuve / Martínez, Eduard Laguarda / ..method), with nitrogen as the adsorption gas (Micromeritics Tristar 3000); the Local solidosity of microcrystalline cellulose Sedin, Maria / Theliander, Hans, Chemical particle size distribution...and the solid density was determined using a Engineering Research and Design, 91 (6), p.1155- during dead-end filtration and sedimentation Micromeritics Accupyc 1330. The shape of the particles was investigated... 1162, Jun 2013 TITLE AUTHORS & PUBLICATION CITATION

Mattsson, Tuve / Martínez, Eduard Laguarda / ..method), with nitrogen as the adsorption gas (Micromeritics Tristar 3000); the Local solidosity of microcrystalline cellulose Sedin, Maria / Theliander, Hans, Chemical particle size distribution was measured...and the solid density was determined using Engineering Research and Design, 91 (6), p.1155- during dead-end filtration and sedimentation a Micromeritics Accupyc 1330. The shape of the particles was investigated... 1162, Jun 2013 Quercioli, Regis / Bernard, Jerome / Haussonne, ..SEM, and BET specific surface measurements were made with a Micromeritics Jean-Marie / Reboul, Jean-Michel / Houivet, TriStarII. Glass frits were added to ZnNb 2 O 6 with...analysed by XRD and their Low sintering temperature of ZnNb 2 O 6 for silver co-sintering David, Ceramics International, In Press, Corrected density was measured with Micrometrics AccuPyc 1330 He pycnometer. Open Proof,Jul 2013 porosity was estimated by calculating... ..out using volumetric gas adsorption analyzers (Micromeritics TriStar 3000 and Macadamia nut shell-derived carbon Bae, Jun-Seok / Su, Shi, International Journal of ASAP2020HD). The helium densities...carbons were measured using a helium composites for post combustion CO 2 capture Greenhouse Gas Control, 19, p.174-182, Nov 2013 pycnometer (Micromeritics AccuPyc 1340). The MPSDs of samples were obtained from...

..out using volumetric gas adsorption analyzers (Micromeritics TriStar 3000 and Macadamia nut shell-derived carbon Bae, Jun-Seok / Su, Shi, International Journal of ASAP2020HD). The helium densities of...carbons were measured using a helium Greenhouse Gas Control, 19, p.174-182, Nov 2013 composites for post combustion CO 2 capture pycnometer (Micromeritics AccuPyc 1340). The MPSDs of samples were obtained...

..v was not calculated. The specimen volume was measured five times for each Uyama, Emi / Inui, Shihoko / Hamada, Kenichi / Magnetic susceptibility and hardness of Au –x specimen using a gas pycnometer (Accupyc 1330, Micromeritics Instrument Corp., Honda, Eiichi / Asaoka, Kenzo, Acta Biomaterialia, USA) at RT. χ v was calculated from these two data. 2.3 Vickers hardness and Pt –y Nb alloys for biomedical applications 9 (9), p.8449-8453, Sep 2013 phase...

Measurements and Design Calculations for a Dijkshoorn, Lydia / Speer, Simon / Pechnig, ..geophysical logs. Matrix density of the cuttings (Figure 3) is measured with a Deep Coaxial Borehole Heat Exchanger in Renate, International Journal of Geophysics, helium gas pycnometer (Accupyc by Micromeritics [3]). The device calculates the Aachen, Germany 2013, p.1-14, Jan 2013 matrix density from the amount of helium saturating the pores of the dried... ..behavior seen with pharmaceutical materials. The true densities of powders were Akseli, Ilgaz / Abebe, Admassu / Sprockel, Omar / Mechanistic characterization of bilayer tablet measured by helium pycnometry (AccuPyc 1330, Micromeritics Instrument Corp., Cuitiño, Alberto M., Powder Technology, 236, Norcross, GA) in triplicate using fresh samples each time. For MCC and formulations p.30-36, Feb 2013 pregelatinized...

Mercury(II) removal from aqueous solution Cataldo, Salvatore / Gianguzza, Antonio / ..values were measured by a pycnometer at T = 20 °C. Further measurements were by sorption onto alginate, pectate and Pettignano, Alberto / Villaescusa, Isabel, Reactive done with a helium pycnometer (Micromeritics AccuPyc 1330) in order to confirm polygalacturonate calcium gel beads. A and Functional Polymers, 73 (1), p.207-217, Jan the density values previously obtained. The water content and the weight swelling 2013 ratio... kinetic and speciation based equilibrium study

Rodrigues, Sandra / Marques, Manuela / Suárez- ..Helium density and chemical analysis Density measurements of the samples were Microstructural investigations of natural and Ruiz, Isabel / Camean, Ignacio / Flores, Deolinda / made with a Helium Pycnometer Accupyc 1330 from Micromeritics. For this synthetic graphites and semi-graphites Kwiecinska, Barbara, International Journal of Coal purpose the samples were degassed at 100 °C and held overnight in vacuum. The Geology, 111, p.67-79, May 2013 overall error... TITLE AUTHORS & PUBLICATION CITATION

..reduction were measured using mercury porosimetry (Pascal 140 and 440, Microstructure and mechanical properties of Chen, Yan / Orlovskaya, Nina / Graule, Thomas / POROTEC, Italy) and He-pycnometry (AccuPyc 1330, Micromeritics, USA). The Kuebler, Jakob, Journal of the European Ceramic Ni/10 mol% Sc 2 O 3 –1 mol% CeO 2 –ZrO 2 specific surface areas were determined using N 2 adsorption isotherm by BET Society, 33 (3), p.557-564, Mar 2013 cermet anode for solid oxide fuel cells measurements (Beckman-Coulter...

..Density (ρ glass ) was measured on glass monoliths (approximately 10 g in weight) Tylkowski, M. / Brauer, D.S., Journal of Non- in a helium pycnometer (AccuPyc 1330-1000, Micromeritics GmbH, Aachen, Mixed alkali effects in Bioglass® 45S5 Crystalline Solids, 376, p.175-181, Sep 2013 Germany). The estimated error limits are ± 0.01 g cm − 3 . Oxygen density was calculated...

Mixed matrix membranes containing MOFs Ploegmakers, Jeroen / Japip, Susilo / Nijmeijer, ..663 FeBTC 1300–1600 – 1.677 MIL-53 1100–1500 31.55 1.642 ⁎ Experimentally for ethylene/ethane separation Part A: Kitty, Journal of Membrane Science, 428, p.445- determined with Micromeritics AccuPyc 1330 pycnometer. Table 2 Fit results of the Membrane preparation and characterization 453, Feb 2013 sorption isotherms of ethylene and ethane using the Sips model for... Mixed matrix membranes containing MOFs for ethylene/ethane separation—Part B: Ploegmakers, Jeroen / Japip, Susilo / Nijmeijer, ..was calculated from the volume of the sample (calculated from the density of the Kitty, Journal of Membrane Science, 428, p.331- sample as determined using a Micromeritics AccuPyc 1330 pycnometer at 26.0±0.8 Effect of Cu 3 BTC 2 on membrane transport 340, Feb 2013 °C), the mass uptake of gas of the sample, and the molar volume and molecular... properties Azari, Kamran / Alamdari, Houshang / Aryanpour, ..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used to Mixing variables for prebaked anodes used in Gholamreza / Picard, Donald / Fafard, Mario / measure...100 A mercury porosimeter (Micromeritics, AutoPore IV) was used Adams, Angelique, Powder Technology, 235, aluminum production to...measured using BET method (Micromeritics, TriStar II). 3 Results... p.341-348, Feb 2013 Azari, Kamran / Alamdari, Houshang / Aryanpour, ..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used...100 A Mixing variables for prebaked anodes used in Gholamreza / Picard, Donald / Fafard, Mario / mercury porosimeter (Micromeritics, AutoPore IV) was used to measure Adams, Angelique, Powder Technology, 235, aluminum production the...measured using BET method (Micromeritics, TriStar II). 3 Results... p.341-348, Feb 2013 Azari, Kamran / Alamdari, Houshang / Aryanpour, ..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used...100 A Mixing variables for prebaked anodes used in Gholamreza / Picard, Donald / Fafard, Mario / mercury porosimeter (Micromeritics, AutoPore IV) was used to...measured using Adams, Angelique, Powder Technology, 235, aluminum production BET method (Micromeritics, TriStar II). 3 Results 3.1 Green... p.341-348, Feb 2013 ..viscosity was measured using a Paar Phisica MCR 500 Rheometer. The density of Modelling and optimizing the gas-lift effect M Amouzgar / M Kahrizi , Journal of Physics D: the liquid was measured using a Micromeritics Accupyc II 1340 Pycnometer. The system for texturing silicon Applied Physics, 46 (13), p.135107, Apr 2013 average velocity in the GLE system was calculated by measuring the time it took a red... Modifications on Microporosity and Physical ..layers. The specific surface area analyser Micromeritics Gemini VII was used for Pham, Son Tung, Advances in Materials Science this test. From adsorption...volume of the sample using the ideal gas law. Properties of Cement Mortar Caused by and Engineering, 2013, p.1-9, Jan 2013 Micromeritics helium pycnometer AccuPyc II 1340 was used for this measurement. Carbonation: Comparison of Experimental ...... TITLE AUTHORS & PUBLICATION CITATION

Modifications on Microporosity and Physical ..the layers. The specific surface area analyser Micromeritics Gemini VII was used for Pham, Son Tung, Advances in Materials Science this test. From adsorption desorption...actual volume of the sample using the ideal Properties of Cement Mortar Caused by and Engineering, 2013, p.1-9, Jan 2013 Carbonation: Comparison of Experimental ... gas law. Micromeritics helium pycnometer AccuPyc II 1340 was used for this...

MOF and UiO-67/MCM-41 adsorbents for ..been produced. The material density and the particle density have been Casas, Nathalie / Schell, Johanna / Blom, Richard pre-combustion CO 2 capture by PSA: characterized by Helium pycnometery (AccuPyc 1330, Micromeritics, Brussels, / Mazzotti, Marco, Separation and Purification Belgium) and by Hg-pycnometery (Pascal 140 and Pascal 440, Thermo Fisher Breakthrough experiments and process Technology, 112, p.34-48, Jul 2013 Scientific, Reinach... design ..CB and as-prepared SiC coated CB after ultrasonic dispersion were determined Molten salt synthesis and characterization of Ye, Jianke / Zhang, Shaowei / Lee, William E., using a Helium Pycnometer (AccuPyc II 1340, Micromeritics Instruments). Zeta Journal of the European Ceramic Society, 33 (10), SiC coated carbon black particles for potential values were measured using a ZetaProbe Analyzer (Colloidal Dynamics Pty p.2023-2029, Sep 2013 refractory castable applications Ltd... ..porosity of the scaffold was indirectly calculated from the sample’s true volume, Wiria, Florencia Edith / Tay, Bee Yen / Morphological and Cell Growth Assessment measured using a pycnometer (Micromeritics, AccuPyc 1330). Ten samples were Ghassemieh, Elaheh, Journal of Materials, 2013, used for the measurement ( ). 2.3. Hardness Measurement Hardness in Near Dense Hydroxyapatite Scaffold p.1-8, Jan 2013 measurement...

New chemically reworkable epoxy coatings Tomuta, Adrian M. / Ramis, Xavier / Fernández- ..and 100.6 MHz 13 C NMR spectra were obtained with a Varian Gemini 400 obtained by the addition of polyesters with Francos, Xavier / Ferrando, Francesc / Serra, spectrometer with Fourier transformed. 1 H NMR spectra...materials before and star topologies to diglycidyl ether of Angels, Progress in Organic Coatings, 76 (11), after curing, which were determined using a Micromeritics AccuPyc 1330 Gas p.1616-1624, Nov 2013 Pycnometer thermostatized at 40 °C. The... bisphenol A resins

New chemically reworkable epoxy coatings Tomuta, Adrian M. / Ramis, Xavier / Fernández- ..shrinkage was calculated from the densities of the materials before and after obtained by the addition of polyesters with Francos, Xavier / Ferrando, Francesc / Serra, curing, which were determined using a Micromeritics AccuPyc 1330 Gas star topologies to diglycidyl ether of Angels, Progress in Organic Coatings, 76 (11), Pycnometer thermostatized at 40 °C. The shrinkage during curing was determined p.1616-1624, Nov 2013 as: (3) % shrinkage... bisphenol A resins

New electrorheological fluid obtained from Marins, Jéssica A. / Dahmouche, Karim / Soares, ..2.4 Sample characterization The density of SiO 2 /SSQ-SH was determined by using mercaptosilsesquioxane-modified silicate Bluma G., Materials Science and Engineering: C, a helium picnometric of Micromeritics AccuPyc 133Q V2.03N, at 25 °C. Fourier suspensions 33 (1), p.133-139, Jan 2013 transform infrared spectra by KBr pellet were recorded in a Bruker spectrometer...

New insight into artifactual phenomena Pailleux, Mélanie / Boudard, Delphine / Pourchez, ..adsorption at 77 K after out-gassing for 2 h at 200 °C (Micromeritics ASAP 2000), during in vitro toxicity assessment of Jérémie / Forest, Valérie / Grosseau, Philippe / using the Brunauer–Emmet–Teller (BET...densities were determined using a gas engineered nanoparticles: Study of TNF-α Cottier, Michèle, Toxicology in Vitro, 27 (3), pycnometer (Micrometrics AccuPyc 1330) working under a helium atmosphere. p.1049-1056, Apr 2013 Results are expressed... adsorption on alumina oxide nanoparticle Grishechko, L.I. / Amaral-Labat, G. / Szczurek, A. / ..Envelope Density Analyser (Micromeritics, USA). The skeletal density...measured Fierro, V. / Kuznetsov, B.N. / Pizzi, A. / Celzard, by helium pycnometry (Accupyc II 1340, Micromeritics, USA) using finely crushed New tannin–lignin aerogels A., Industrial Crops and Products, 41, p.347-355, samples for...automatic apparatus (ASAP 2020, Micromeritics, USA). The samples Jan 2013 were first... TITLE AUTHORS & PUBLICATION CITATION

Nitramines with Varying Sensitivities: ... Densities were measured at room temperature by using a Micromeritics AccuPyc Functionalized J Zhang, C He, DA Parrish… - Chemistry-A 1330 gas pycnometer. Elemental analyses were carried out on an Exeter CE-440 Dipyrazolyl-N-nitromethanamines as European …, 2013 - Wiley Online Library elemental analyzer. The mass spectra were obtained by using a Shimadzu GCMS- QP5050A mass spectrometer. Energetic Materials Novel flexible aerogels derived from Aravind, Parakkulam Ramaswamy / Niemeyer, ..was used to determine the skeletal density using Micromeritics AccuPyc II 1340 Philipp / Ratke, Lorenz, Microporous and and the value was found to be 1.43 g/cm 3...adsorption at 77 K (using a Tristar II methyltrimeth... Mesoporous Materials, 181, p.111-115, Nov 2013 3020, from Micromeritics, Norcross, USA). The specific surface area...

Novel flexible aerogels derived from Aravind, Parakkulam Ramaswamy / Niemeyer, ..used to determine the skeletal density using Micromeritics AccuPyc II 1340 and the Philipp / Ratke, Lorenz, Microporous and value was found to be 1...determined by N 2 adsorption at 77 K (using a Tristar II methyltrimeth... Mesoporous Materials, 181, p.111-115, Nov 2013 3020, from Micromeritics, Norcross, USA). The specific surface area... Lo, Chieh-Fang / Wu, Jung-Fen / Li, Hsieh-Yu / Novel polyvinyl alcohol nanocomposites Hung, Wei-Song / Shih, Chao-Ming / Hu, Chien- ..were determined using a gas pycnometer (AccuPyc II 1340, Micromeritics, containing carbon nano-tubes with Fe 3 O 4 Chieh / Liu, Ying-Ling / Lue, Shingjiang Jessie, Norcross, GA, USA) using Archimedes's...which was measured using a gas pendants for alkaline fuel cell applications Journal of Membrane Science, 444, p.41-49, Oct pycnometer, AccuPyc II 1340, Micromeritics, Norcross, GA, USA). V W is the van... 2013 Novel processing of iron–manganese alloy- Chou, Da-Tren / Wells, Derrick / Hong, Daeho / ..sintered 3-DP parts were measured using an AccuPyc II 1340 helium pycnometer Lee, Boeun / Kuhn, Howard / Kumta, Prashant N., (Micromeritics, Norcross, GA). The envelope density...parts was measured using a based biomaterials by inkjet 3-D printing Acta Biomaterialia, 9 (10), p.8593-8603, Nov 2013 GeoPyc 1360 (Micromeritics). Using these density values, the percent... On the influence of silica type on the Alves, C. / Marcelo, T. / Oliveira, F.A.C. / Alves, ..determined by laser scattering (Cilas 1064, France). True density measurements L.C. / Mascarenhas, J. / Trindade, B., Journal of were carried out using a AccuPyc 1330 Helium pycnometer (Micromeritics Int. structural integrity of dense La 9.33 Si 2 Ge 4 the European Ceramic Society, 33 (12), p.2251- Corp., USA). Further data on the characterization of the raw materials as well as O 26 electrolytes for SOFCs 2258, Oct 2013 experimental... Stares, Steferson Luiz / Fredel, Márcio Celso / ..a digital dial indicator. Skeletal density ( ρ skeletal ) of the samples was measured Paper-derived hydroxyapatite Greil, Peter / Travitzky, Nahum, Ceramics by He-Pycnometry (AccuPyc 1330, Micromeritics Instrument Corporation, Norcross, International, 39 (6), p.7179-7183, Aug 2013 GA, USA). Total porosity of the samples ( P p ) was derived from fractional...

..a digital dial indicator. Skeletal density ( ρ skeletal ) of the samples was measured Stares, S.L. / Fredel, M.C. / Greil, P. / Travitzky, by He-Pycnometry (AccuPyc 1330, Micromeritics Instrument Corporation, Norcross, Paper-derived β -TCP N., Materials Letters, 98, p.161-163, May 2013 GA, USA). Total porosity of the samples ( P p ) was derived from fractional... ..measured by Hg intrusion in a Quantachrome PoreMaster 33. The real density of Performance of a bauxite waste as oxygen- Mendiara, T. / Gayán, P. / Abad, A. / de Diego, the particles was measured with a Micromeritics AccuPyc II 1340 helium L.F. / García-Labiano, F. / Adánez, J., Fuel carrier for chemical-looping combustion picnometer. Brunauer–Emmett–Teller (BET) surface area value was measured and a Processing Technology, 109, p.57-69, May 2013 using coal as fuel low value... Performance of CLOU process in the Adánez-Rubio, I. / Abad, A. / Gayán, P. / de ..pores, was determined by He picnometry in a Micromeritics AccuPyc II 1340. The Diego, L.F. / García-Labiano, F. / Adánez, J., surface area of the oxygen carrier...adsorption/desorption of nitrogen at 77 K in a combustion of different types of coal with CO International Journal of Greenhouse Gas Control, Micromeritics ASAP-2020 (Micromeritics Instruments Inc.), whereas the pore 2 capture 12, p.430-440, Jan 2013 volumes... TITLE AUTHORS & PUBLICATION CITATION

Zúñiga, Camilo / Larrechi, Maria Soledad / ..P (161.9 MHz) NMR spectra were obtained using a Varian Gemini 400 Phosphorus flame retardant polybenzoxazine Lligadas, Gerard / Ronda, Juan Carlos / Galià, spectrometer with Fourier transform and DMSO-d 6...The closed-cell volume foams based on renewable diphenolic acid Marina / Cádiz, Virginia, Polymer Degradation percentage was determined with a Micromeritics AccuPyc 1330 Gas Pycnometer and Stability, In Press, Corrected Proof,Oct 2013 thermostatized at 40 °C, using...

Zúñiga, Camilo / Larrechi, Maria Soledad / ..least three measurements using different specimen. The closed-cell volume Phosphorus flame retardant polybenzoxazine Lligadas, Gerard / Ronda, Juan Carlos / Galià, percentage was determined with a Micromeritics AccuPyc 1330 Gas Pycnometer foams based on renewable diphenolic acid Marina / Cádiz, Virginia, Polymer Degradation thermostatized at 40 °C, using argon as gas according to a modification of ASTM and Stability, In Press, Corrected Proof,Oct 2013 D6226-10... ..physical adsorption isotherm (BET method) A Micromeritics TriStar 3000 Quercia, G. / van der Putten, J.J.G. / Hüsken, G. / Photovoltaic's silica-rich waste sludge as equipment using N 2 with a soaking...density by helium pycnometry A helium Brouwers, H.J.H., Cement and Concrete pycnometer AccuPyc® II 1340 from Micromeritics was used to determine the supplementary cementitious material (SCM) Research, 54, p.161-179, Dec 2013 specific density of... ..Nitrogen physical adsorption isotherm (BET method) A Micromeritics TriStar 3000 Quercia, G. / van der Putten, J.J.G. / Hüsken, G. / Photovoltaic's silica-rich waste sludge as equipment using N 2 with a soaking time of 12...pycnometry A helium pycnometer Brouwers, H.J.H., Cement and Concrete AccuPyc® II 1340 from Micromeritics was used to determine the specific density of supplementary cementitious material (SCM) Research, 54, p.161-179, Dec 2013 the... Physical characterization of sweet sorghum bagasse, tobacco residue, soy hull and fiber Cardoso, C.R. / Oliveira, T.J.P. / Santana Junior, ..five analyses for each biomass. 2.4 True density A Micromeritics AccuPyc 1331 gas J.A. / Ataíde, C.H., Powder Technology, 245, pycnometer with a measuring sensitivity of...ranges of the same material due to the sorghum bagasse particles: Density, particle p.105-114, Sep 2013 equipment (AccuPyc 1331) precision. The objective of these measurements... size and shape distributions Physical property behaviour of North Dakota ..was of an approximately 10 g sample was determined for the gasifier turn-out Mangena, S.J. / Bunt, J.R. / Waanders, F.B., Fuel samples (crushed to below 1 mm), using a Micromeretics Accupyc instrument. The lignite in an oxygen/steam blown moving bed Processing Technology, 106, p.326-331, Feb 2013 crushed samples were dried overnight in an oven at 105 °C and then cooled in a gasifier desiccator prior...

Poly-lactide- co -glycolide nanoparticles Sinha, Biswadip / Mukherjee, Biswajit / Pattnaik, ..mercury porosimeter (AutoPore IV 9500; Micromeritics Instruments, Norcross, containing voriconazole for pulmonary Gurudutta, Nanomedicine: Nanotechnology, USA) at the lowest...density of the particles was measured using an AccuPyc 1340 delivery: in vitro and in vivo study Biology and Medicine, 9 (1), p.94-104, Jan 2013 helium pycnometer (Micromeritics Instruments) with a 1-mL sample chamber... ..was determined using a mercury porosimeter (AutoPore IV 9500; Micromeritics Poly-lactide- co -glycolide nanoparticles Sinha, Biswadip / Mukherjee, Biswajit / Pattnaik, Instruments, Norcross, USA) at the lowest...measured using an AccuPyc 1340 Gurudutta, Nanomedicine: Nanotechnology, containing voriconazole for pulmonary helium pycnometer (Micromeritics Instruments) with a 1-mL sample chamber Biology and Medicine, 9 (1), p.94-104, Jan 2013 delivery: in vitro and in vivo study using... ..were achieved by the Archimedes's method in water, and absolute densities were Bouzidi, N. / Bouzidi, A. / Gaudon, P. / Merabet, Porcelain containing anatase and rutile measured by helium pycnometry (Micromeritics AccuPyc). Bulk and absolute D. / Blanchart, P., Ceramics International, 39 (1), densities were used to calculate the total porosity of samples. The dielectric nanocrystals p.489-495, Jan 2013 properties... ..volumeter. Total porosity was calculated from the true density of the material Brachhold, Nora / Aneziris, Christos G., Journal of Porous materials for alkali contaminated measured by He-pycnometer AccuPyc 1330 (Micromeritics, Aachen, Germany). the European Ceramic Society, 33 (10), p.2013- Refractoriness under load was determined according to DIN EN ISO 1893 in a environments 2021, Sep 2013 NETZSCH hood... TITLE AUTHORS & PUBLICATION CITATION

..based on volume after pouring and at the end of tapping respectively. 5. True Predicting the density and tensile strength of Pai, Dhananjay A. / Okos, Martin R., Journal of density: Nitrogen Pycnometer (Accupyc 1330, Micromeritics, GA) ( n = 20 for Soy Food Engineering, 116 (1), p.184-194, May 2013 viscoelastic soy powder compacts Flour, n = 10 for Soy Protein Concentrate) ( Fitzpatrick et al. 2004 ). 2.2...

Preparation and characterization of low- Uehira, Mayo / Okada, Masahiro / Takeda, Shoji / ..mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics Instrument Corp., crystallized hydroxyapatite nanoporous Matsumoto, Naoyuki, Applied Surface Science, In Norcross, GA), after the...samples were determined using helium pycnometry plates and granules Press, Corrected Proof,Sep 2013 (AccuPyc 1330; Micromeritics Instrument Corp., Norcross, GA), after the...

Preparation and characterization of low- Uehira, Mayo / Okada, Masahiro / Takeda, Shoji / ..determined using mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics crystallized hydroxyapatite nanoporous Matsumoto, Naoyuki, Applied Surface Science, In Instrument Corp., Norcross, GA), after the...determined using helium pycnometry plates and granules Press, Corrected Proof,Sep 2013 (AccuPyc 1330; Micromeritics Instrument Corp., Norcross, GA), after the... ..absolute density is determined by measuring the helium pressure change in a Preparation and characterization of olive pits Koutsomitopoulou, A.F. / Bénézet, J.C. / Bergeret, calibrated volume (He Pycnometer, AccuPyc 1330 Micromeritics). The bulk density A. / Papanicolaou, G.C., Powder Technology, In powder as a filler to PLA-matrix Bio- for porous materials is defined as the density measured by considering the overall Press, Accepted Manuscript,Nov 2013 composites volume... Shan, Shi-Jie / Yang, Li-Ping / Liu, Xiao-Min / Wei, Preparation and characterization of TiO 2 ..respectively. The density of the sintered samples was measured using an absolute Xiao-Ling / Yang, Hui / Shen, Xiao-Dong, Journal type analysis technique with a micromeritics Accupyc II1340 Pycnometer under 20 doped and MgO stabilized Na–β″-Al 2 O 3 of Alloys and Compounds, 563, p.176-179, Jun psi of Nitrogen. The relative density was calculated as the following equation: (3... electrolyte via a citrate sol–gel method 2013 Preparation of high refractive index La 2 O 3 - TiO 2 glass by aerodynamic levitation Xiang, Heng / Guan, Lu / Peng, Zhijian / Li, ..x-ray fluorescence spectrometer (PANalytical, Axios mAX ). The sample density was Jianqiang, Ceramics International, In Press, measured by a gas pycnometer (Micromeritics Accupyc II 1340). The glass transition technique and effects of Bi 2 O 3 substitution Accepted Manuscript,Oct 2013 temperature T g and crystallization onset temperature T x of the prepared glasses... on its thermal and optical properties

Lee, Kang Uk / Park, Kyung Ju / Kim, Myeong Ho / Preparation of the carbon sphere coated with ..clip. 2.7 Characterization of the pigment The density of particles was measured Kwon, Oh Joong / Kim, Jae Jeong, Dyes and using gas pycnometry (AccuPyc Ⅱ1340, MICROMERITICS). The surface charge of iron oxide and its application for electronic Pigments, In Press, Accepted Manuscript,Oct pigments was investigated by adopting a zeta potential analyzer (ELS-Z2plus... paper 2013 ..characterisation Powder densities were measured using a Micromeritics AccuPyc II Stennett, Martin C. / Corkhill, Claire L. / Marshall, Preparation, characterisation and dissolution 1340 pycnometer. The pycnometer was purged 50...Surface area analysis by BET Luke A. / Hyatt, Neil C., Journal of Nuclear was conducted using a Micromeritics Gemini 2360 instrument. The powder was of a CeO 2 analogue for UO 2 nuclear fuel Materials, 432 (1-3), p.182-188, Jan 2013 flushed... ..characterisation Powder densities were measured using a Micromeritics AccuPyc II Stennett, Martin C. / Corkhill, Claire L. / Marshall, Preparation, characterisation and dissolution 1340 pycnometer. The pycnometer was purged...Surface area analysis by BET was Luke A. / Hyatt, Neil C., Journal of Nuclear conducted using a Micromeritics Gemini 2360 instrument. The powder was flushed of a CeO 2 analogue for UO 2 nuclear fuel Materials, 432 (1-3), p.182-188, Jan 2013 with nitrogen... Kuenzel, C. / Grover, L.M. / Vandeperre, L. / ..Archimedes’ principle, 31 with the theoretical density determined on milled Production of nepheline/quartz ceramics Boccaccini, A.R. / Cheeseman, C.R., Journal of the samples using pycnometry (AccuPyc II 1340 He pycnometer, Micromeritics, GA, from geopolymer mortars European Ceramic Society, 33 (2), p.251-258, Feb USA). 2.4 Physical property characterisation Vickers hardness was determined on 2013 polished... TITLE AUTHORS & PUBLICATION CITATION

Production of polyphenol extracts from grape Farías-Campomanes, Angela M. / Rostagno, ..changes were observed. The true density ( ρ t ) of the particles was determined by bagasse using supercritical fluids: Yield, Mauricio A. / Meireles, M. Angela A., The Journal picnometry with helium gas (Micromeritics, model AccuPyc II 1340 V1.02, Norcross, extract composition and economic evaluation of Supercritical Fluids, 77, p.70-78, May 2013 USA). The bed apparent density ( ρ a ) was calculated by dividing the feed...

..Geopyc 1360 pycnometer. The helium density was measured with Accupyc II 1340 Properties of graphite composites based on Magampa, P.P. / Manyala, N. / Focke, W.W., V1.03 Helium pycnometer. The volume of the...calculating helium density. Both Journal of Nuclear Materials, 436 (1-3), p.76-83, natural and synthetic graphite powders and a pycnometers were purchased from Micromeritics Instruments Corporation, USA. May 2013 phenolic novolac binder The open accessible porosity... ..means of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer. Their Pyrolysis of blends of coal and tyre wastes in Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel, apparent...with mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury a fixed bed reactor and a rotary oven 113, p.817-825, Nov 2013 porosimeter...N 2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus. The software... ..of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer. Pyrolysis of blends of coal and tyre wastes in Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel, Their...mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury a fixed bed reactor and a rotary oven 113, p.817-825, Nov 2013 porosimeter...2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus. The software package... ..of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer. Pyrolysis of blends of coal and tyre wastes in Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel, Their...mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury a fixed bed reactor and a rotary oven 113, p.817-825, Nov 2013 porosimeter. From...2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus. The... Rapid synthesis of La 0.85 Na 0.15 MnO 3 by Regaieg, Y. / Sicard, L. / Monnier, J. / Delaizir, G. / ..Supra40 ZEISS FEG-SEM microscope operating at 10 kV. The density of the as- Koubaa, M. / Godart, C. / Ammar-Merah, S. / produced pellets was measured with a Micromeritics AccuPyc 1330 helium spark plasma sintering: Magnetic behavior Cheikhrouhou, A., Materials Chemistry and pycnometer. Quantitative analysis of chemical elements was performed by and magnetocaloric properties Physics, 139 (2-3), p.629-633, May 2013 inductively coupled plasma... Akkal, R. / Cohaut, N. / Khodja, M. / Ahmed-Zaid, ..VG69 ® , and Geltone ® ) are used in this work. Their density ( ρ ) is measured up by Rheo-SAXS investigation of organoclay water T. / Bergaya, F., Colloids and Surfaces A: Helium pycnometry (Accupyc 1330, Micromeritics). Bentone 38 (Elementis) is an Physicochemical and Engineering Aspects, 436, in oil emulsions organically modified hectorite ( ρ = 1.66 g/cm 3 ) obtained from a... p.751-762, Sep 2013 Jamaludin, Abdul Rashid / Kasim, Shah Rizal / ..the medium for relative comparison and ρ th is attained from the density test Sago starch as binder and pore-forming agent Abdullah, Mohd Zukifly / Ahmad, Zainal Arifin, measured with a gas pycnometer (Micromeritics AccuPyc 1330). m 1 is the dried for the fabrication of porcelain foam Ceramics International, In Press, Corrected weight of the sample, whereas m 2 and m 3 are the weight of the sample measured Proof,Sep 2013 after... Piva, Jorge Henrique / Wanderlind, Augusto / ..densities of specimen powders, obtained by dry grinding in a tungsten carbide mill, Sintering and crystallization of plates Just, Jeanini / Montedo, Oscar Rubem Klegues / were measured by He picnometry (Micromeritics Accupyc 1340, Norcross, USA), prepared from coarse glass ceramic frits De Noni, Agenor, Junior, Ceramics International, while crystalline phases were determined by X-ray diffractometry (Shimadzu XRD- 39 (8), p.9137-9144, Dec 2013 6000... ..in each sample interval using the particle density measured for each site Zobeck, Ted M. / Baddock, Matthew / Scott Van Soil property effects on wind erosion of determined with a Micromeritics AccuPyc 1330 helium pycnometer (Micromeritics Pelt, R. / Tatarko, John / Acosta-Martinez, Instrument Corp., Norcross, GA, USA) from sieved bulk samples as described in the organic soils Veronica, Aeolian Research, 10, p.43-51, Sep 2013 next... TITLE AUTHORS & PUBLICATION CITATION

Reitz, Elena / Vervaet, Chris / Neubert, Reinhard Solid crystal suspensions containing ..true density ( ρ true ) of the extrudate was determined in a 3.5 ml sample holder H.H. / Thommes, Markus, European Journal of with a helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany). griseofulvin – Preparation and bioavailability Pharmaceutics and Biopharmaceutics, 83 (2), The apparent density ( ρ app ) was characterized by a mercury porosimeter... testing p.193-202, Feb 2013 ... was monitored for the different particles using thermogravimetric analysis Solid lipid particles in lipid films to control the C Bilbao-Sáinz, BS Chiou, GM Glenn… - Pest (Model 2950; TA Instruments ... films and the composite SLP films was performed in diffusive release of 2-heptanone management …, 2013 - Wiley Online Library a TA Instruments DSC 2910. ... using a gas pycnometer (AccuPyc II 1340 Series pycnometer; Micromeritics Instrument Co Solution-based approaches for making high- Lepry, William C. / Riley, Brian J. / Crum, Jarrod V. ..mp ), and the average pore size. Helium pycnometry was used to measure / Rodriguez, Carmen P. / Pierce, David A., Journal specimen density ( ρ s ) with an AccuPyc II 1340 (Micromeritics Instrument density sodalite waste forms to immobilize of Nuclear Materials, 442 (1-3), p.350-359, Nov Corporation, Norcross, GA). 2.7 Product consistency test (PCT) Specimens of spent electrochemical salts 2013 SM1–5... Spheronisation mechanism of MCC II-based Krueger, Cornelia / Thommes, Markus / ..acceptable. 2.2.6 Porosity The helium density (ρ He ) of the pellets was determined Kleinebudde, Peter, Powder Technology, 238, by a helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany). pellets p.176-187, Apr 2013 For each tested pellet batch three samples were analyzed. The apparent density... ..materials was estimated by means of the Archimedes principle, whereas the true Stabilization of fluorine-containing industrial Ponsot, Inès / Falcone, Roberto / Bernardo, density was assessed by He pycnometry (Micromeritics AccuPyc 1330, Norcross, Enrico, Ceramics International, 39 (6), p.6907- waste by production of sintered glass- GA). The main crystalline phases of all heat-treated samples and untreated ground 6915, Aug 2013 ceramics mixtures... Mehrban, Nazia / Bowen, James / Vorndran, Elke ..densities were determined using a helium pycnometer (AccuPyc II 1340, Structural changes to resorbable calcium / Gbureck, Uwe / Grover, Liam M., Colloids and Micromeritics, UK) employing 100 measurements per sample with...analysed using phosphate bioceramic aged in vitro Surfaces B: Biointerfaces, 111, p.469-478, Nov an AutoPore IV mercury porosimeter (Micromeritics, UK) at pressures in the range 3 2013 kPa–207... Mehrban, Nazia / Bowen, James / Vorndran, Elke ..using a helium pycnometer (AccuPyc II 1340, Micromeritics, UK) employing 100 Structural changes to resorbable calcium / Gbureck, Uwe / Grover, Liam M., Colloids and measurements per sample...was sealed and the sample analysed using an AutoPore Surfaces B: Biointerfaces, 111, p.469-478, Nov phosphate bioceramic aged in vitro IV mercury porosimeter (Micromeritics, UK) at pressures in the range 3 kPa... 2013 Structure and oxidation resistance of micro- Amaral-Labat, G. / Zollfrank, C. / Ortona, A. / ..ρ s was measured by helium pycnometry (Accupyc II 1340, Micromeritics, USA). Pusterla, S. / Pizzi, A. / Fierro, V. / Celzard, A., For that purpose, sample pieces were crushed in a mortar...size distribution was cellular Si–SiC foams derived from natural Ceramics International, 39 (2), p.1841-1851, Mar estimated by mercury porosimetry (AutoPore IV 9500, Micrometrics, USA). The resins 2013 experiments were performed... Amaral-Labat, G. / Zollfrank, C. / Ortona, A. / Structure and oxidation resistance of micro- ..known dimensions (3×3×1.5 cm 3 ). The skeletal density ρ s was measured by Pusterla, S. / Pizzi, A. / Fierro, V. / Celzard, A., helium pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose, sample cellular Si–SiC foams derived from natural Ceramics International, 39 (2), p.1841-1851, Mar pieces were crushed in a mortar and dried at 120 °C in vacuum overnight... resins 2013 Studies on the lithium ion diffusion coefficients of electrospun Nb 2 O 5 Reddy, M.V. / Jose, R. / Le Viet, A. / Ozoemena, ..TOPAS software. Density measurement was performed using pycnometer Kenneth I. / Chowdari, B.V.R. / Ramakrishna, S., (AccuPyc 1330, Micromeritics) and BET surface area was evaluated by a surface area nanostructures using galvanostatic Electrochimica Acta, In Press, Corrected analyzer (Micromeritics Tristar 3000). Electrodes for the Li-diffusion coefficient intermittent titration and electrochemical Proof,Oct 2013 studies... impedance spectroscopy TITLE AUTHORS & PUBLICATION CITATION

Studies on the lithium ion diffusion coefficients of electrospun Nb 2 O 5 Reddy, M.V. / Jose, R. / Le Viet, A. / Ozoemena, ..Density measurement was performed using pycnometer (AccuPyc 1330, Kenneth I. / Chowdari, B.V.R. / Ramakrishna, S., Micromeritics) and BET surface area was evaluated by a surface area analyzer nanostructures using galvanostatic Electrochimica Acta, In Press, Corrected (Micromeritics Tristar 3000). Electrodes for the Li-diffusion coefficient studies were intermittent titration and electrochemical Proof,Oct 2013 prepared... impedance spectroscopy ..measured by micrometer and weighed, providing the bulk density. They were then Farahi, Elham / Purnell, Phil / Short, Neil R., Supercritical carbonation of calcareous tested in a helium pycnometer (AccuPyc 1330, Micromeritics) over 10 purge cycles Cement and Concrete Composites, 43, p.48-53, to provide the true densities, from which the porosity was calculated. Samples composites: Influence of curing Oct 2013 were... ..measured using a micrometer and the bulk density calculated. They were then Farahi, Elham / Purnell, Phil / Short, Neil R., Supercritical carbonation of calcareous tested in a helium pycnometer (AccuPyc 1330, Micromeritics) over 10 purge cycles Cement and Concrete Composites, 43, p.12-19, to provide the true densities, from which the porosity was calculated. For each composites: Influence of mix design Oct 2013 case...

Tewes, Frederic / Ehrhardt, Carsten / Healy, Anne Superparamagnetic iron oxide nanoparticles ..properties ( n = 2). 2.2.5 Particle true density The true density of the materials was Marie, European Journal of Pharmaceutics and measured using an Accupyc 1330 Pycnometer (Micromeritics®) with helium (SPIONs)-loaded Trojan microparticles for Biopharmaceutics, In Press, Corrected Proof,Sep (99.995% purity) to determine the volume of accurately weighed samples. Samples... targeted aerosol delivery to the lung 2013

..specimens. The skeletal density ρ s was measured using an Accupyc 1340 Helium Syndiotactic polystyrene aerogels containing Wang, Xiao / Jana, Sadhan C., Polymer, 54 (2), Pycnometer (Micrometrics Instrument Corp...nitrogen adsorption–desorption multi-walled carbon nanotubes p.750-759, Jan 2013 isotherms analyzed using Micromeritics Tristar II 3020 Analyzer. The aerogel specimens were sectioned...... 2.2 Densities, Solubility and Melting Points of UN and NU. Ten density Synthesis and Characterization of Urea JC Oxley, JL Smith, S Vadlamannati… - determinations for UN and NU products were obtained using a Micromeritics Nitrate and Nitrourea Propellants, …, 2013 - Wiley Online Library AccuPyc 1340 gas pycnometer. ... Ammonium nitrate exhibited additional small peak at ca. 2900 cm −1 . Synthetic Methods for Preparing Ionic Liquids ... Chem. Eur. J., 19: 2947–2950. doi: 10.1002/chem.201203740. Author JP Maciejewski, H Gao… - Chemistry-A European Information. 1 ... Densities were measured by using a Micromeritics Accupyc 1330 Containing Hypophosphite and …, 2013 - Wiley Online Library gas pycnometer. Viscosities were measured with a Grabner MINIVIS II Portable Carbon-Extended Dicyanamide Anions Micro viscometer. ..pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose, Amaral-Labat, G. / Grishechko, L.I. / Fierro, V. / Tannin-based xerogels with distinctive samples...automatic adsorption apparatus (Micromeritics, USA). For that Kuznetsov, B.N. / Pizzi, A. / Celzard, A., Biomass purpose...porosimetry experiments (AutoPore IV 9500, Micromeritics) were carried porous structures and Bioenergy, 56, p.437-445, Sep 2013 out. This... Tannin-based xerogels with distinctive Amaral-Labat, G. / Grishechko, L.I. / Fierro, V. / ..Envelope Density Analyser (Micromeritics, USA). The skeletal density...measured Kuznetsov, B.N. / Pizzi, A. / Celzard, A., Biomass by helium pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose, porous structures and Bioenergy, 56, p.437-445, Sep 2013 samples...automatic adsorption apparatus (Micromeritics, USA). For that purpose... TITLE AUTHORS & PUBLICATION CITATION

The degree of compression of spherical Nordström, Josefina / Persson, Ann-Sofie / ..determined by helium displacement using a pycnometer (AccuPyc 1330, granular solids controls the evolution of Lazorova, Lucia / Frenning, Göran / Alderborn, Micromeritics, USA). Two powder samples were taken and each...measurements in microstructure and bond probability during Göran, International Journal of Pharmaceutics, a porosimeter (Autopore III 9420, Micromeritics, USA). An amount of pellets in the 442 (1-2), p.3-12, Feb 2013 range 900... compaction

The degree of compression of spherical Nordström, Josefina / Persson, Ann-Sofie / ..displacement using a pycnometer (AccuPyc 1330, Micromeritics, USA). Two granular solids controls the evolution of Lazorova, Lucia / Frenning, Göran / Alderborn, powder samples were taken and each...mercury intrusion measurements in a microstructure and bond probability during Göran, International Journal of Pharmaceutics, porosimeter (Autopore III 9420, Micromeritics, USA). An amount of pellets in the 442 (1-2), p.3-12, Feb 2013 range... compaction The effect of concentration on the structure Chung, Chul-Woo / Turo, Laura A. / Ryan, Joseph ..used for helium pycnometry utilizing an AccuPyc II 1340 Gas Pycnometer from V. / Johnson, Bradley R. / McCloy, John S., Journal Micrometrics...intrusion porosimetry (MIP) was performed by Micromeritics on the and crystallinity of a cementitious waste of Nuclear Materials, 437 (1-3), p.332-340, Jun Cast Stone specimens using a Micromeritics AutoPore 9520 instrument capable of form for caustic wastes 2013 pressures... The improvement of electron transport rate of TiO 2 dye-sensitized solar cells using mixed Bakhshayesh, A.M. / Mohammadi, M.R., ..density of TiO 2 nanostructures was measured by a Micromeritics AccuPyc 1330 Ceramics International, 39 (7), p.7343-7353, Sep pycnometer analyzer. They were also characterized...equations, respectively at nanostructures with different phase 2013 77.35 K using a Micromeritics Tristar 3000 analyzer. External surface area of... compositions

The improvement of electron transport rate ..density of TiO 2 nanostructures was measured by a Micromeritics AccuPyc 1330 Bakhshayesh, A.M. / Mohammadi, M.R., of TiO 2 dye-sensitized solar cells using mixed pycnometer analyzer. They were also characterized...equations, respectively at Ceramics International, 39 (7), p.7343-7353, Sep 77.35 K using a Micromeritics Tristar 3000 analyzer. External surface area of the nanostructures with different phase 2013 samples... compositions The influence of rolling friction on the shear behaviour of non-cohesive pharmaceutical Persson, Ann-Sofie / Frenning, Göran, European ..cm 3 ) was measured with helium pycnometry (AccuPyc 1330, Micromeritics, USA). Journal of Pharmaceutical Sciences, 49 (2), p.241- The granules were stored at...from mercury pycnometry (Autopore III 9420, granules – An experimental and numerical 250, May 2013 Micromeritics, USA) as described by Wikberg and Alderborn... investigation The influence of rolling friction on the shear behaviour of non-cohesive pharmaceutical Persson, Ann-Sofie / Frenning, Göran, European ..measured with helium pycnometry (AccuPyc 1330, Micromeritics, USA). The Journal of Pharmaceutical Sciences, 49 (2), p.241- granules were stored at...2) was assessed from mercury pycnometry (Autopore III granules – An experimental and numerical 250, May 2013 9420, Micromeritics, USA) as described by Wikberg and Alderborn... investigation ..following analyses and tests. The density of the sintered composites was The influence of SrSO 4 on the tribological Liu, Feng / Yi, Gewen / Wang, Wenzhen / Shan, determined by using a helium pycnometry (AccuPyc 1330, Micromeritics Int. Corp., Yu / Jia, Junhong, Ceramics International, In properties of NiCr–Al 2 O 3 cermet at USA) after calculating the volume. The hardness measurements were conducted Press, Corrected Proof,Oct 2013 elevated temperatures using MH–5... TITLE AUTHORS & PUBLICATION CITATION

The kinetics of devitrification of amorphous ..surfaces of the sintered specimens. The density of the powders and sintered Graeve, O.A. / Saterlie, M.S. / Kanakala, R. / de la alloys: The time–temperature–crystallinity specimens was determined using a Micromeritics AccuPyc II 1340 ultrahigh-purity Torre, S. Diaz / Farmer, J.C., Scripta Materialia, 69 He pycnometer. 3 Results and discussion The morphology of the sintered specimens diagram describing the spark plasma (2), p.143-148, Jul 2013 is... sintering of Fe-based metallic glasses

The morphology of limestone-based pellets Ridha, Firas N. / Manovic, Vasilije / Anthony, ..pore size distribution were determined on a Micromeritics analyzer (Micromeritics Edward J. / Macchi, Arturo, Materials Chemistry Tristar II-3020) by N 2 adsorption at...was determined using helium pycnometry prepared with kaolin-based binders and Physics, 138 (1), p.78-85, Feb 2013 (Micromeritics AccuPyc II-1340 Pycnometer). Scanning electron...

Fernandes, Hugo R. / Andreola, Fernanda / ..following characterization techniques were employed: (1) the absolute density was The use of egg shells to produce Cathode Ray Barbieri, Luisa / Lancellotti, Isabella / Pascual, measured using a He pycnometer (Micromeritics Accupyc 1330, USA); (2) the Tube (CRT) glass foams Maria J. / Ferreira, José M.F., Ceramics apparent density of materials was determined by measuring the weight and the International, 39 (8), p.9071-9078, Dec 2013 dimensions...

Thermal stability and water effect on ion- Guilera, Jordi / Ramírez, Eliana / Fité, Carles / ..to approach the industrial reactor. Skeletal density ( ρ s ) was measured by helium exchange resins in ethyl octyl ether Iborra, Montserrat / Tejero, Javier, Applied displacement in an Accupyc 1330 apparatus (Micromeritics). BET surface area, S BET production at high temperature Catalysis A: General, 467, p.301-309, Oct 2013 , was estimated from N 2 adsorption-desorption isotherm at 77 K (krypton... Thermoelectric Ca 0.9 Yb 0.1 MnO 3− δ grain Quetel-Weben, Simon / Retoux, Richard / ..Archimedes method with a Kern ABT 220–4 M analytical balance and checked by Noudem, Jacques G., Journal of the European the helium pycnometry process with a Micromeritics AccuPyc 1330 pycnometer. X- growth controlled by spark plasma sintering Ceramic Society, 33 (10), p.1755-1762, Sep 2013 ray powder diffraction patterns were recorded on an X’PERT (Almelo, Netherlands... ..composed of approximately 42 wt% of carbon. The density of the preforms was Fu, Z. / Schlier, L. / Travitzky, N. / Greil, P., Three-dimensional printing of SiSiC lattice determined via helium pycnometry (Accupyc 1330, Micromeretics, Norcross, USA) Materials Science and Engineering: A, 560, p.851- and open porosity of the preforms was calculated from the measured geometrical truss structures 856, Jan 2013 and pycnometrical densities...

Transmission electron microscopy study of ..measurements were performed with a helium picnometer (AccuPyc II 1340, David, J. / Trolliard, G. / Maître, A., Acta Micromeritics, Verneuil, France). The specific areas of the...Emmett–Teller (BET) the reaction mechanisms involved in the Materialia, 61 (14), p.5414-5428, Aug 2013 carbothermal reduction of anatase method (ASAP 2000, Micromeritics, Verneuil, France), and the size of particles...

Twin screw wet granulation: Influence of El Hagrasy, A.S. / Hennenkamp, J.R. / Burke, M.D. ..granules was measured by a helium pycnometer (AccuPyc II 1340, Micromeritics, formulation parameters on granule / Cartwright, J.J. / Litster, J.D., Powder Norcross, GA), using granules in the size...same size fraction was measured using properties and growth behavior Technology, 238, p.108-115, Apr 2013 Geopyc (Micromeritics, Norcross, GA). In this method, a small... Lahiri, Debrupa / Singh, Virendra / Rodrigues, ..TaC-RT and TaC-HT, respectively. The density of the pellets was measured using Ultrahigh-pressure consolidation and Giovani Ritta / Costa, Tania Maria Haas / Gallas, helium gas pycnometry (Accupyc 1340, Micromeretics Instrument Corporation, Marcia R. / Bakshi, Srinivasa Rao / Seal, Sudipta / deformation of tantalum carbide at ambient Norcross, GA, USA) and expressed in terms of relative density considering the true Agarwal, Arvind, Acta Materialia, 61 (11), p.4001- and high temperatures density of... 4009, Jun 2013 TITLE AUTHORS & PUBLICATION CITATION

..mercury porosimetry (Autopore 4-Micromeretics). Incertitude on porous volume Understanding the key parameters for the Ould-Chikh, S. / Brodusch, N. / Crozet, N. / is...physisorption isotherms (ASAP 2420-Micromeretics). Skeletal densities of Hemati, M. / Rouleau, L., Powder Technology, rational design of layered oxide materials by powders are...measured by helium pycnometry (Accupyc-Micromeretics). Powder 237, p.255-265, Mar 2013 composite sol–gel procedures bulk density and grain density... Uniaxial tension and compression ..density and weight percent of fiber in the composite. The density of each Markkula, Sam / Malecki, H.C. / Zupan, Marc, composite panel was measured with a Micromeritics AccuPyc gas pycnometer for characterization of hybrid CNS–glass Composite Structures, 95, p.337-345, Jan 2013 the purpose of comparing specific properties. The weight percent of fiber in each fiber–epoxy composites glass... Use of chemically and physically mixed iron Pans, Miguel A. / Gayán, Pilar / Abad, Alberto / ..density of the particles was measured with a Micromeritics AccuPyc II 1340 helium García-Labiano, Francisco / de Diego, Luis F. / pycnometer. The surface area...adsorption/desorption of nitrogen at 77 K in a and nickel oxides as oxygen carriers for gas Adánez, Juan, Fuel Processing Technology, 115, Micromeritics ASAP-2020 (Micromeritics Instruments Inc.), whereas the pore combustion in a CLC process p.152-163, Nov 2013 volume... Turchiuli, C. / Jimenez Munguia, M.T. / ..0.2 mm) (Density tester, Varian, Fr). The solid true density was measured using an Use of different supports for oil Hernandez Sanchez, M. / Cortes Ferre, H. / air pycnometer (AccuPyc, Micromeritics, Fr). The determination of the total oil Dumoulin, E., Powder Technology, In Press, encapsulation in powder by spray drying content of the powder required first the reconstitution of the liquid... Corrected Proof,Aug 2013 ..Particle density, determined by an AccuPyc 1330 Pycnometer (Quantachrome Use of silica nanopowder to accelerate CO 2 Quintanilla, M.A.S. / Valverde, J.M., Particuology, Instruments...the BET surface area, determined by a Micromeritics Tristar II 3020 sorption by Ca(OH) 2 11 (4), p.448-453, Aug 2013 physisorption analyzer...manual gas pycnometer (Quantachrome AccuPyc 1330 Pycnometer) consisting of two vessels... ..AccuPyc 1330 Pycnometer (Quantachrome Instruments), is 2.36 g/cm 3 and the Use of silica nanopowder to accelerate CO 2 Quintanilla, M.A.S. / Valverde, J.M., Particuology, BET surface area, determined by a Micromeritics Tristar II 3020 physisorption sorption by Ca(OH) 2 11 (4), p.448-453, Aug 2013 analyzer, is 16.32 m 2 /g. Scanning electron microscope (SEM) pictures of this powder... Dias, A.M.A. / Rey-Rico, A. / Oliveira, R.A. / Wound dressings loaded with an anti- Marceneiro, S. / Alvarez-Lorenzo, C. / Concheiro, ..dressing material), and ρ solid (g/cm 3 ) is the true density measured by helium inflammatory jucá ( Libidibia ferrea ) extract A. / Júnior, R.N.C. / (...) / de Sousa, H.C., The pycnometry (Accupyc 1330 Micromeritics, Micromeritics Instrument Corporation, using supercritical carbon dioxide technology Journal of Supercritical Fluids, 74, p.34-45, Feb USA). 2.6 Fluid handling properties 2.6.1 Oxygen permeability Oxygen... 2013