TELEDYNE BENTHOS GEOPHYSICAL Sonar Imaging Systems Effective July 2008

2008 Geophysical Product Catalog

Products C3D-TOW C3D-LPM SIS-1625 SIS-1624 Chirp III

Components Sub Sea Units Surface Units Cables & Terminations Shipping Cases & Options Complete Packages Dimensional Drawings Specifications

This product line is represented by:

1 TELEDYNE BENTHOS GEOPHYSICAL

2 TELEDYNE BENTHOS GEOPHYSICAL

Table of Contents

1. C3D-TOW 3D Underwater Imaging System (Tow Configuration) p. 5

2. C3D-LPM 3D Underwater Imaging System (Lightweight Pole Mount Configuration) p. 15

3. SIS-1625 Dual Frequency Side Scan Sonar and Chirp Sub-bottom Profiler p. 23

4. SIS-1624 Dual Frequency Chirp and CW Sonar Side Scan p. 31

5. Chirp III Sub-bottom Profilers p. 41

6. Miscellaneous

a. Software Options p. 51

b. Letter of Credit / Bank Transfer p. 53

c. Shipping Weights and Dimensions p. 54

d. Terms and Conditions of Sale p. 55

4 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

C3D Tow Vehicle Configuration Side Scan - Bathymetry - Sub-bottom Profiler The C3D system combines high resolution imagery and wide swath bathymetry for bottom mapping, image interpretation, and a 3-dimensional look at the seafloor. It represents the latest in sonar imaging with patented technology under license from Simon Fraser University using a technique called CAATI (Computed Angle of Arrival Transient Imaging). This technique incorporates a multi-array transducer and is capable of solving for multiple angles-of-arrival, resulting in a more detailed view of the seafloor.

The C3D system provides efficiencies for surveyors by offering a wider swath and the combination of imagery, bathymetry and sub-layer data, in one sensor. The system is ideal for fisheries habitat mapping, port and harbor clearance, coastal studies, deep ocean mapping, cable route surveys, and mine countermeasures.

Applications Channel clearance studies Hydrographic charting Engineering and scientific studies Biomass for Fisheries Object detection Cable/pipeline route surveys Bridge inspection Bottom mapping

5 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

6 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

C3D Tow Vehicle The TTV-290 series of tow vehicles is designed for hydrodynamic stability in most sidescan towing applications. The Sidescan transducer bays are designed to offer 20, 30, and 40 degrees downward looking positions for optimum performance in a variety of different applications. The stainless steel midplate construction gives users a rigid and stable platform to mount additional sensors. The high visibility yellow Polyethylene covers are designed to handle years of use. These new and improved shells are more resistant to impact than earlier models, and are easy and cost effective to modify or replace.

SUBSEA UNITS

TTV-296 C3D Tow Vehicle - ADSL TTV-296 Tow Vehicle (ADSL) operates at 200kHz and is designed for operations up to a 2000 meter depth with cable length up to 5000 meters at 5Mbits throughput. The standard vehicle is equipped with a Sonardyne Radian motion reference unit and a Falmouth Scientific NXIC Depth/CTD sensor. The TTV-296 offers (2) additional RS-232 communication ports with 12 and/or 24 VDC. These can be used to interface with a magnetometer, responder, and/or a high resolution motion sensor.

TTV-297 C3D Tow Vehicle - VDSL TTV-297 Tow Vehicle (VDSL) operates at 200kHz and is designed for operations up to 2000 meter depth with cable length up to 1000 meters at 7.5Mbits throughput. The standard vehicle is equipped with a Sonardyne Radian motion reference unit and a Falmouth Scientific NXIC Depth/CTD sensor. The TTV-297 offers (2) additional RS-232 communication ports with 12 and/or 24 VDC. These can be used to interface with a magnetometer, responder, and / or a high resolution motion sensor.

TTV-298 C3D-SBP Tow Vehicle - ADSL TTV-298 Tow Vehicle (ADSL) operates at 200kHz and is designed for operations up to 2000 meter depth with cable length up to 5000 meters at 5Mbits throughput. In addition, this Vehicle offers a 2x2 Sub-bottom profiler transmitter array operating at 2-7 kHz and a dual hydrophone for optimal performance. The standard vehicle is equipped with a Sonar- dyne Radian motion reference unit and a Falmouth Scientific NXIC Depth/CTD sensor. The TTV-298 offers (2) additional RS-232 communication ports with 12 and/or 24 VDC.

TTV-299 C3D-SBP Tow Vehicle - VDSL TTV-299 Tow Vehicle (VDSL) operates at 200kHz and is designed for operations up to 2000 meter depth with cable length up to 1000 meters at 7.5Mbits throughput. In Addition, this Vehicle offers a 2x2 Sub-bottom profiler transmitter array operating at 2-7 kHz and a dual hydrophone for optimal performance. The standard vehicle is equipped with a Sonardyne Radian motion reference unit and a Falmouth Scientific NXIC Depth/CTD sensor. The TTV-299 offers (2) additional RS-232 communication ports with 12 and/or 24 VDC.

C3D Tow Vehicle

C3D with Sub-bottom Profile

7 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

SURFACE UNITS

Transceiver

CL-162 VDSL Transceiver Includes a 270 volt power supply for the tow vehicle, a high speed communications link (VDSL, 7.5 MBit/sec) for cable operations up to 1000 meters (single co-axial), and an Ethernet hub for interfacing between the tow vehicle and the topside data acquisition computer (DAC).

CL-163 ADSL Transceiver Includes a 270 volt power supply for the tow vehicle, communications link (ADSL, 5Mbit/sec) for long cable operations up to 5000 meters using a single co-axial cable. This unit interfaces the topside data acquisition computer (DAC) with the tow vehicle.

CL-162 VDSL Transceiver CL-163 ADSL Transceiver

Digital Acquisition Computer (DAC) This Industrial Rackmount Computer comes in a rugged case that is designed for optimum acquisition performance and durability. It is equipped with a high end Intel processor. The hard drive offers ample room for data storage and is minimally 500GB in size. This computer also offers a Gigabyte Ethernet connection. In addition, DACs come with a high resolution 20” flat screen monitor, a full function keyboard and a mouse.

DAC-310 C3D Rackmount Computer for Side Scan Bathymetry with Triton® Isis Bathy DAC-350 C3D Rackmount Computer for Side Scan Bathymetry with Hypack® Survey

DAC-610 C3D Rackmount Computer for Sub-bottom Profiling with Triton® SB-Logger DAC-650 C3D Rackmount Computer for Sub-bottom Profiling with Hypack® Survey +SBP

See pages 51 - 52 for software package descriptions.

Digital Acquisition Computer w/ Monitor

8 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

CABLES (KEVLAR DECK CABLE - NOT FOR TOWING) The C3D-TOW system is delivered with a standard 75 meter Kevlar Deck Cable of 0.35” diameter, single coax, reinforced with abrasion resistant urethane jacket. The cable includes the dry side RF style connector to the CL-162 or CL-163 Transceiver and a Kevlar cable termination assembly for the wet side consisting of a Kellems grip and a molded female 4-pin micro, Subconn connector (MCIL-4F) with a locking sleeve.

011060 Kevlar Deck Only coax cable w/termination 75M

ES LENGTH Additional meter of Kevlar Deck Only cable - per meter

Example: A 100 meter cable would be priced as a 75 meter cable with 25 meters of extra cable @ $10/meter ($3,550 + $250 = $3,800)

CABLES (ARMORED TOW CABLE)

013295 Armored Tow coax cable 0.45” dia. w/termination TWC-290 - 200M

ES LENGTH Additional meter of Armored coax cable 0.45” dia. - per meter *Not to exceed 5000 meters based on 5Mbits/sec data rate **Recommend Rochester A301241 for application up to 5000 meters

C-250-218 TWC-290 Armored cable termination assembly for TTV-290 series

OPTIONS FOR C3D-TOW SERIES

B298-0528 Y molded cable for mulitple ancillary sensors (3 or 4 sensors)

D664-0110 Pole mount plate for TTV-290 series tow vehicle

SHIPPING CASES

012692 Wood crate for TTV-290 series + Cable + Transceiver + DAC(s)

013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

9 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

INTEGRATED PACKAGES FOR C3D TOW CONFIGURATION

C3D PACKAGES (Standard) with Triton® Isis Bathy Software C3D-TOW-1 C3D Tow Vehicle Package Includes: TTV-296 C3D Tow Vehicle - ADSL CL-163 ADSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Isis Bathy 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D-TOW-3 C3D Tow Vehicle Package Includes: TTV-297 C3D Tow Vehicle - VDSL CL-162 VDSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Isis Bathy 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D PACKAGES (Standard) with Hypack® Survey Software

C3D-TOW-2 C3D Tow Vehicle Package Includes: TTV-296 C3D Tow Vehicle - ADSL CL-163 ADSL Transceiver DAC-350 Rackmount Computer for Side Scan Bathymetry with Hypack® Survey 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D-TOW-4 C3D Tow Vehicle Package Includes: TTV-297 C3D Tow Vehicle - VDSL CL-162 VDSL Transceiver DAC-350 Rackmount Computer for Side Scan Bathymetry with Hypack® Survey 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

See pages 51 - 52 for software package descriptions.

10 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

INTEGRATED PACKAGES FOR C3D SUB-BOTTOM TOW CONFIGURATION

C3D SUB-BOTTOM PACKAGES with Triton® Isis Bathy and Triton® SB Logger Software C3D-SBP-TOW-1 C3D-SBP Tow Vehicle Package Includes: TTV-298 C3D Tow Vehicle - ADSL CL-163 ADSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Isis Bathy DAC-610 Rackmount Computer for Sub-bottom with SB Logger 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D-SBP-TOW-3 C3D-SBP Tow Vehicle Package Includes: TTV-299 C3D Tow Vehicle - VDSL CL-162 VDSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Isis Bathy DAC-610 Rackmount Computer for Sub-bottom with SB Logger 011060 Kevlar Deck Only coax cable - 75M 012692 Wood for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D SUB-BOTTOM PACKAGES with Hypack® Survey Software

C3D-SBP-TOW-2 C3D-SBP Tow Vehicle Package Includes: TTV-298 C3D-SBP Tow Vehicle - ADSL CL-163 ADSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Hypack® Survey DAC-620 Rackmount Computer for Sub-bottom with Hypack® Survey +SBP 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

C3D-SBP-TOW-4 C3D-SBP Tow Vehicle Package Includes: TTV-299 C3D-SBP Tow Vehicle - VDSL CL-162 VDSL Transceiver DAC-310 Rackmount Computer for Side Scan Bathymetry with Hypack® Survey DAC-620 Rackmount Computer for Sub-bottom with Hypack® Survey +SBP 011060 Kevlar Deck Only coax cable - 75M 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

See pages 51 - 52 for software package descriptions.

11 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

DIMENSIONAL DRAWINGS

CL-162 Transceiver CL-163 Transceiver DAC Rackmount (shown without monitor)

21 in (537 mm) 21 in (537 mm) 21 in (537 mm)

22 in 22 in 22 in (558 mm) (558 mm) (558 mm)

6 in (151 mm) 6 in (151 mm) 6 in (151 mm)

C3D Tow Vehicle

821 in (2087 mm)

42.8 in (1088 mm) 21.0 in (533 mm)

29.2 in (741 mm)

18.5 in (470 mm) 16.0 in (406 mm)

12 TELEDYNE BENTHOS GEOPHYSICAL

C3D Tow Vehicle

SYSTEM SPECIFICATIONS TOPSIDE DATA ACQUISITION COMPUTER (DAC) SYSTEM Operating System: Windows XP Sonar Frequency: 200 kHz Storage: Large capacity hard drive, writable Maximum Operating Depth: 2000 meters CD/DVD Side Scan Range: 25 to 300 meters per side (200 kHz) Network Interface: 100/1000 base T Ethernet (compatible with Bathymetric Range: 6-10 times altitude ADSL communication interface) Resolution (across track) Serial: RS232 x 4 Side Scan Sonar: 4.5 cm Display Monitor: 20” Flat Panel Bathymetry: 5.5 cm Beam Width 1 degree (one-way) TOPSIDE TRANSCEIVER Pulse Length: 25 μsec to 1 msec (depending on range) Power Supply: Input 120/240 VAC auto-sensing, output Repetition Rate: Up to 30 pings/sec 300VDC maximum Depression Angle: 40 degrees (default) Network interface: Ethernet Transmit Source Level: Maximum 224dB re: 1uPa@1M Dimensions: 2U Rack mount 48.3 cm (19 inches) Vertical Resolution (Bathymetry): 5cm SOFTWARE Standard Sensors: Depth / CTD (FSI NXIC) CAATI: C3D Controller (proprietary) Heading / Pitch / Roll (Sonardyne Radian) Acquisition (Side Scan & Bathy): Triton, Hypack, QPS, OIC, Eiva Optional Sensors: Altimeter (optional) Acquisition (Sub-bottom): Triton, Chesapeake (sold separately-call for details) Magnetometer (optional) Post-Processing (optional): Triton, Hypack, QPS, OIC, Eiva, CARIS Motion Reference Unit (optional) Data Format: XTF TOW VEHICLE CABLES Construction: Stainless steel, polyethelene Call for specific cable requirements Length: 208.7 cm (82 in) Kevlar Deck Cable: 75 meter coax (standard) Front Cross Section: 38.4 cm x 53.3 cm (15 1/8 in x 21 in) Armored Tow Cable: Co-axial cable Weight (in air): 158 kg (350 lbs) Weight (in water): 45.3 kg (100 lbs)

13 TELEDYNE BENTHOS GEOPHYSICAL

14 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

C3D-LPM Lightweight Pole Mount for Small Vessel and Shallow Water Applications

The C3D-LPM system combines high resolution imagery and wide swath bathymetry for bottom mapping, image interpretation, and a 3-dimensional look at the seafloor. It represents the latest in sonar imaging with patented technology under license from Simon Fraser University using a technique called CAATI (Computed Angle of Arrival Transient Imaging). This technique incorporates a multi-array transducer and is capable of solving for multiple angles-of-arrival, resulting in a more detailed view of the seafloor.

Applications Coastal studies Fisheries Engineering and scientific studies

Sea Bed Classification

15 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

16 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

C3D-LPM Lightweight Pole Mount Vehicle

The C3D system provides efficiencies for surveyors by offering a wider swath than conventional bathy systems and the combination of both imagery and bathymetry in one sensor. The C3D-LPM system is designed for fisheries habitat mapping, port and harbor clearance, coastal studies and mine countermeasures and any other shallow surveys (0 to 100 meter max. altitude for optimal performance). Its manageable size is ideal for small craft operations. System Features Streamlined - allows for stable operation from 1 to 10 knots (recommended speeds for normal survey operations are between 3 and 5 knots). Portable - designed in Polyurethane with imbedded stainless steel substructure. Modular - interfaces easily to the Topside processor via Ethernet connections. Expandable - designed to interface directly to GPS, motion sensors, altimeters, CTD’s, etc. Flexible - can be purchased as a complete system or as a subsea addition to your existing hydrographic equipment.

C3D-LPM

C3D-LPM w/ altimeter mounting

SUBSEA UNITS

D298-0470 C3D-LPM Lightweight Pole Mount Subsea Pod - Standard This Subsea Pod is polyurethane with an imbedded stainless steel substructure in the pole mounting section, nose and tail. The standard 200 kHz C3D transducers can be set at 20, 30, or 40 degrees declination. It mounts on a 6” bolt circle with ½-13 threaded holes.

D298-0495 C3D-LPM Lightweight Pole Mount Subsea Pod with Altimeter Mounting This Subsea pod has the identical features as the standard Subsea Pod with a holder cut into the tail for mounting an altimeter (altimeter not included).

17 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

SURFACE UNITS Transceiver D298-0650 C3D-LPM Transceiver The LPM Transceiver offers the same processing capabilities as the Standard C3D in a small package. There are specific input ports for Sound Velocity and Altimeter. The LPM transceiver is powered by 110/220V input.

C3D-LPM Transceiver

Digital Acquisition Computer (DAC) This Industrial Rackmount Computer comes in a rugged case that is designed for optimum acquisition performance and durability. It comes with a high end Intel processor. The hard drive offers ample room for data storage and is minimally 500GB in size. This computer also offers a Gigabyte Ethernet connection. In addition, DACs come with a high resolution 20” flat screen monitor, a full function keyboard and a mouse.

DAC-310 C3D Rackmount Computer for Side Scan Bathymetry with Triton® Isis Bathy

DAC-350 C3D Rackmount Computer for Side Scan Bathymetry with Hypack® Survey

See pages 51 - 52 for software package descriptions.

Digital Acquisition Computer w/ Monitor

18 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

CABLES

B298-0485-10 C3D-LPM transducer cables - requires 2 but sold separately - 10M each

B298-0485-20 C3D-LPM transducer cables - requires 2 but sold separately - 20M each

C3D-LPM Transducer Cables (2 required)

OPTIONS FOR C3D-LPM SERIES

012976 Altimeter (500 kHz) - 50M range

013063 Sound Velocity Probe and Depth Sensor

013112 Sonardyne 8041 Radian Motion Reference Sensor

SHIPPING CASES

012911 Hardigg C3D-LPM Case for C3D-LPM + Cables + Transceiver

013500 Corrugated C3D-LPM Case for C3D-LPM + Cables + Transceiver

013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

013503 Corrugated, C3D-LPM Transceiver only case

19 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

INTEGRATED PACKAGES FOR C3D-LPM CONFIGURATION

C3D-LPM PACKAGES C3D-LPM-1 C3D-LPM Vehicle Package with Triton® Isis Bathy Software D298-0470 C3D-LPM Lightweight Pole Mount Subsea Assembly D298-0650 C3D-LPM Transceiver DAC-310 C3D Rackmount Computer for SSB with Triton® Isis Bathy B298-0485-10 C3D-LPM transducer cables - requires 2 (included) - 10M each 013500 Corrugated C3D-LPM Case for LPM Pod, Cables & Transceiver 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

C3D-LPM-2 C3D-LPM Vehicle Package with Hypack® Survey Software D298-0470 C3D-LPM Lightweight Pole Mount Subsea Assembly D298-0650 C3D-LPM Transceiver DAC-350 C3D Rackmount Computer for SSB with Hypack® Survey B298-0485-10 C3D-LPM transducer cables - requires 2 (included) - 10M each 013500 Corrugated C3D-LPM Case for LPM Pod, Cables & Transceiver 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

See pages 51 - 52 for software package descriptions.

20 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

DIMENSIONAL DRAWINGS

C3D-LPM Transceiver DAC Rackmount (shown without monitor)

21 in (53.7 cm) 21 in (53.7 cm)

22 in 22 in (55.8 cm) (55.8 cm)

6.0 in 6.0 in (15.1 cm) (15.1 cm)

C3D-LPM Lightweight Pole Mount Subsea Assembly

39.1in (99.3 cm)

6.8 in 6.2 in (17.3 cm) (15.7 cm)

4.5 in (11.4 cm)

1.0 in (2.54 cm)

6.6 in (16.8 cm)

21 TELEDYNE BENTHOS GEOPHYSICAL

C3D-LPM Lightweight Pole Mount

SYSTEM SPECIFICATIONS

SYSTEM TOPSIDE DATA ACQUISITION COMPUTER (DAC) Sonar Frequency: 200 kHz Operating System: Windows XP Optimum Operating Depth: 0 to 100M Storage: Large capacity hard drive, writable Side Scan Range: 25 to 300 meters per side (200 kHz) CD/DVD Bathymetric Range: 6-10 times altitude Network Interface: 100/1000 base T Ethernet Resolution (across track) Serial: RS232 x 4 Side Scan Sonar: 4.5 cm Display Monitor: 20” Flat Panel Bathymetry: 5.5 cm TOPSIDE TRANSCEIVER Beam Width: 1 degree (one-way) Power Supply: Input 120/220 VAC auto-sensing, output Pulse Length: 25 usec to 1 msec (depending on range) 48VDC Repetition Rate: Up to 30 pings/sec Network interface: Ethernet Depression Angle: 40 degrees (default) Dimensions: 2U Rack mount 48.3 cm (19 inches) Transmit Source Level: Maximum 224dB re: 1μPa@1M SOFTWARE Vertical Resolution (Bathymetry): 5 cm CAATI: C3D Controller (proprietary) Optional Sensors: Depth / CTD (FSI NXIC)(optional) Acquisition: Triton, Hypack, QPS, OIC, Eiva (sold separately) Heading / Pitch / Roll (Sonardyne Radian) Post-Processing (optional): Triton, Hypack, QPS, OIC, Eiva, CARIS (optional) Data Format: XTF Altimeter (optional) CABLES Optical Gyro (optional) Call for specific cable requirements Motion Reference Unit (optional) C3D-LPM Transducer Cable: 10M each (requires 2) - default OVER-THE-SIDE MOUNT C3D-LPM Transducer Cable: 20M each (requires 2) - on request Construction: Stainless steel with polyethelene Length: 99.3 cm (39 in) Diameter: 17.3 cm (6.8 in) Weight (in air): 20.4 kg (45 lbs)

22 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

The SIS-1625 Seafloor Imaging System has quickly become the industry standard for shallow water (<2000M) seafloor survey operations. This field proven, highly versatile survey tool offers a fully digital platform capable of collecting high resolution chirp side scan/sub-bottom data. The high resolution, extended range chirp data and multiple data sensor capability provide the surveyor with a significant savings in instrument cost and survey time. This system also offers 12 and 24VDC with a total of 50 watts available instrument power and (4) RS-232 lines of communications for customer selected sensors.

Applications Cable / Pipeline Route Surveys Habitat Studies & Sea Floor Classification Engineering & Scientific Studies Object Detection Channel Clearance

23 TELEDYNE BENTHOS GEOPHYSICAL SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

24 TELEDYNE BENTHOS GEOPHYSICAL SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Proﬁler The TTV-290 series of tow vehicles is designed for hydrodynamic stability in most sidescan towing applications. The sidescan transducer bays are designed to offer 0, 10, 20, and 30 degrees downward looking positions for optimum performance in a variety of different applications. The stainless steel midplate construction provides users a rigid and stable platform to mount additional sensors. The high visibility yellow polyethylene covers are designed to handle years of use. These new and improved shells are more resistant to impact than earlier models, and are easy and cost effective to modify or replace.

TTV-295 Tow Vehicle

SUBSEA UNIT TTV-295 Tow Vehicle The TTV-295 offers dual frequency (100/400 kHz) Side Scan Transducers, a 2x2 (2-7 kHz) sub-bottom profiler array (AT- 471) with Chirp and Continuous Wave (CW) tone burst transmission, which is software selectable, and a dual hydrophone array for optimum receive performance. The subsea unit has a basic built in heading, pitch and roll sensor, and depth sensor. This package offers (4) RS-232 communication lines in addition to 12 and 24 VDC with a total of 50 watts available for instrument power.

25 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

SURFACE UNITS

Transceiver

CL-163 ADSL Transceiver Includes a 270 volt power supply for the tow vehicle, Communications Link (ADSL, 5Mbit/sec) for long cable operations up to 10,000 meters (with SIS-1625) using a single a co-axial cable. This unit interfaces the topside data acquisition computer (DAC) with the tow vehicle.

CL-163 ADSL Transceiver

DAC-210 1625 Rackmount Computer with Triton® SS-Logger Software

DAC-220 1625 Rackmount Computer with Chesapeake® SonarWiz.Map Software

See pages 51 - 52 for software package descriptions.

Digital Acquisition Computer w/ Monitor

26 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

CABLES (KEVLAR DECK ONLY - NOT FOR TOWING) The SIS-1625 Sonar system is delivered with a standard 75 meter Kevlar Deck Cable of 0.35” diameter, single coax, reinforced with abrasion resistant urethane jacket. The cable includes the dry side RF style connector to the CL-163 Transceiver and a Kevlar cable termination assembly for the wet side consisting of a Kellems grip and a molded female 4-pin micro, Subconn connector (MCIL-4F) with a locking sleeve.

011060 Kevlar Deck Only coax cable w/termination - 75M

ES LENGTH Additional meter of Kevlar Deck Only Cable - per meter

Example: A 100 meter cable would be priced as a 75 meter cable with 25 meters of extra cable @ $10/meter ($3,550 + $250 = $3,800)

Kevlar Deck Only Cable

CABLES (ARMORED TOW CABLE)

013295 TWC-290 Armored Tow coax cable 0.45” dia. w/termination - 200M ES LENGTH Additional meter of Armored coax cable 0.45” dia. - per meter *Not to exceed 5000 meters based on 5Mbits/sec data rate **Recommend Rochester A301241 for application up to 5000 meters

C-250-218 TWC-290 Armored cable termination assembly for 0.45” cable

OPTIONS FOR SIS-1625 SERIES

B298-0528 Y molded cable for mulitple ancillary sensors (3 or 4 sensors)

SHIPPING CASES

012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

27 TELEDYNE BENTHOS GEOPHYSICAL SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

INTEGRATED PACKAGES FOR SIS-1625

1625-1 SIS-1625 Combined Side Scan Sonar/Sub-bottom Profiling System TTV-295 Tow Vehicle CL-163 ADSL Transceiver DAC-210 Rackmount Computer with Triton® SS-Logger 011060 Kevlar Deck Only coax cable - 75m 012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver+ DAC

1625-2 SIS-1625 Combined Side Scan Sonar/Sub-bottom Profiling System TTV-295 Tow Vehicle CL-163 ADSL Transceiver DAC-220 Rackmount Computer with Chesapeake® SonarWiz.Map 011060 Kevlar Deck Only coax cable - 75m 012692 Wood crate for TTV-290 series Tow Vehicle + Cable +Transceiver + DAC

See pages 51 - 52 for software package descriptions.

28 TELEDYNE BENTHOS GEOPHYSICAL SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

DIMENSIONAL DRAWINGS

CL-163 Transceiver DAC Rackmount (without computer)

21 in (537 mm) 21 in (537 mm)

22 in 22 in (558 mm) (558 mm)

6 in 6 in (151 mm) (151 mm)

TTV-290 Series Tow Vehicle

821 in (2087 mm)

42.8 in (1088 mm) 21.0 in (533 mm)

29.2 in (741 mm)

18.5 in (470 mm) 16.0 in (406 mm)

29 TELEDYNE BENTHOS GEOPHYSICAL SIS-1625 Dual Frequency Side Scan and Chirp Sub-bottom Profiler

SYSTEM SPECIFICATIONS

SYSTEM TOPSIDE DATA ACQUISITION COMPUTER (DAC) Sonar Frequency 100/400kHz Operating System: Windows XP Storage: Large capacity hard drive, writable Maximum Operating Depth 2000 meters CD/DVD Side Scan Sonar Network Interface: 100/1000 base T Ethernet (compatible with Acoustic Source Level +225 dB re 1uPa@ 1 meter ADSL communication interface) Range 25 to 500 meters each channel Serial: RS232 x 4 Chirp Frequency Range Simultaneous sweeps in the 110 kHz to 130 Display Monitor: 20” Flat Panel kHz and 370 kHz to 390 kHz bands CW Frequencies Simultaneous 123 kHz and 383 kHz TOPSIDE TRANSCEIVER Transducers Multi-element array, dual channel 100/400 Power Supply: Input 120/240 VAC auto-sensing, output kHz, 0.5 degree horizontal beam; 60 degree 300VDC maximum vertical beam. Network interface: Ethernet Sub-bottom Dimensions: 2U Rack mount 48.3 cm (19 inches) Transducer Transmit projector array; dual hydrophone array; 30 degree conical radiation pattern SOFTWARE Frequency 2 kHz to 7kHz swept FM (4 KW output), CAATI: C3D Controller (proprietary) synchronous with side scan Acquisition: Triton, Chesapeake, OIC Resolution 5 cm Post-Processing (optional): Triton, Chesapeake, OIC Processing Calibrated transmit waveform stored in ROM; Data Format: XTF matched filter FFT digital signal processing. Scale Selection 25 meters to 500 meters full scale. CABLES Sensors Call for specific cable requirements Standard Sensors: Depth (FSI EOPM2) Kevlar Deck Only Cable: 75 meter coax (default) Heading / Pitch / Roll (TCM2.5) Armored Tow Cable: Co-axial cable

Optional Sensors: Altimeter (optional) (sold separately) Magnetometer (optional) Motion Reference Unit (optional)

TOW VEHICLE Construction: Stainless steel, polyethelene Length: 208.7 cm (82 in) Front Cross Section: 38.4 cm x 53.3 cm (15 1/8 in x 21 in) Weight (in air): 158 kg (350 lbs) Weight (in water): 45.3 kg (100 lbs)

30 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

The Teledyne Benthos SIS-1624 Series Side Scan Sonar is a fully integrated system that uses advanced Chirp and Continuous Wave (CW) technologies, dual frequency and an advanced high- speed communication link to acquire high resolution side scan sonar data.

Applications Harbor & Channel Clearing Coastal Studies Engineering & Scientific Studies Habitat & Sediment Mapping Cable/Pipeline Route Surveys Dredge & Disposal Site Surveys

Geological Studies

31 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

32 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

SIS-1624 Dual Frequency Side Scan The Teledyne Benthos SIS-1624 is a professional grade side scan sonar survey system that includes a topside acquisition computer and software, a 75-meter tow cable, the CL-160 Transceiver and the TTV-196D Tow Vehicle, which acquires long range, high resolution Chirp side scan sonar data in two frequency bands (100 kHz and 400 kHz) simultaneously. In addition to the Chirp side scan sonar, which provides long range data sets, the tow vehicle provides CW side scan sonar which can be used to acquire high resolution data over short ranges.

SIS-1624 Dual Frequency Side Scan Sonar

SUBSEA UNIT TTV-196D The TTV-196D tow vehicle operates in two frequency bands (100 kHz and 400kHz) simultaneously and provides a choice of Chirp or Continuous Wave (CW) operations. The tow vehicle contains pitch, roll and heading sensors and a high-speed communication link that transmits the information to the topside CL-160 Transceiver over a single coaxial cable at speeds up to 5Mbits/second. The TTV-196D is a hydrodynamically stable tow vehicle made of stainless steel, with a safety leash breakaway system, op- erable to a maximum depth of 1,750 meters. The vehicle includes a standard accessory kit that is composed of: fuses, shear pins, tail fins and a short power cable.

TTV-196D-PTR The TTV-196D tow vehicle operates in two frequency bands (100 kHz and 400kHz) simultaneously and provides a choice of Chirp or Continuous Wave (CW) operations. The tow vehicle contains pitch, roll and heading sensors and a high-speed communication link. The processed data is then transmitted to the CL-160 Transceiver over a single coaxial cable at speeds up to 5Mbits/second. The TTV-196D is a hydrodynamically stable tow vehicle made of stainless steel, with a safety leash breakaway system that operates to a maximum depth of 1,750 meters. The vehicle includes a standard accessory kit that is composed of: fuses, shear pins, tail fins and a short power cable. This vehicle has the added benefit of pressure, temperature, and responder options. (See PTR Option for more details)

33 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

SURFACE UNITS Transceiver CL-160 CL-160 Transceiver This surface component provides 150VDC power for the tow vehicle and serves as the high-speed communications link between the tow vehicle and the topside computer. ADSL communication allows for data transfer over as much as 10,000 meters of cable (with SIS-1624) . The CL-160 can be sold as a stand alone unit or can be intergrated with a Digital Acquisi- tion Computer (DAC).

CL-160 Transceiver

DAC-410 Rackmount Computer with Triton® SS-Logger Software DAC-420 Rackmount Computer with Chesapeake® SonarWiz.Map Software

DAC-450 Rackmount Computer with Hypack® Survey Software

See pages 51 - 52 for software package descriptions.

Digital Acquisition Computer w/ Monitor

34 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

CABLES (KEVLAR DECK/TOW CABLE) The SIS-1624 sonar system is delivered with a 75 meter kevlar deck/tow cable of 0.35” diameter, single coaxial cable reinforcedwith an abrasion resistant urethane jacket. This cable can be used as a tow cable with the TTV-196D tow vehicle. The cable includes the dry side RF style connector to the CL- 160 Transceiver and a Kevlar cable termination assembly for the wet side consisting of a Kellems grip and a molded female 4-pin micro, Subconn connector (MCIL-4F) with a locking sleeve.

011060 Kevlar Deck and Tow coax cable w/termination - 75M

ES LENGTH Additional meter of Kevlar Cable - per meter

Example: A 100 meter cable would be priced as a 75 meter cable with 25 meters of extra cable @ $10/meter ($3,550 + $250 = $3,800)

Kevlar Deck/Tow Cable

CABLES (ARMORED TOW CABLE) For towing length exceeding 200 meters, it is recommended to use the Armored Tow Cable, a single coaxial armored cable of 0.45” diameter. The cable includes an Armored Cable Termination Assembly 0.45” for the wet side with a tow point attachment and a molded female 4 pin micro, Subconn connector (MCIL-4F). For the dry end, the cable is left unterminated to ease integration with customer supplied terminations.

013478 Armored Tow coax cable 0.45” dia. w/termination - 200M

ES LENGTH Additional meter of Armored coax cable 0.45” dia. - per meter

008359 Armored termination for 0.45” cable for TT-196D Termination includes all mechanical parts to terminate a 0.45” dia. cable in the field

C-250-44-2 Armored termination for 0.45” cable for TTV-196D with magnetometer • Termination includes all mechanical parts to terminate a 0.45” dia. cable in the field • Magnetometer to Tow vehicle and Power Y-cable.

35 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

OPTIONS FOR SIS-1624

PTR-OPT PTR option for TTV-196D Upgrade Option to Add PTR Pressure, Temperature, Responder Temperature sensor – Range -2°C to 38°C, ± 0.5° Pressure (depth) sensor – 1,500PSI ± 0.5% of range Responder unit – 27KHz, ORE Trackpoint II compatible

SHIPPING CASES

013501 Wood crate for TTV-196D + Cable + Transceiver

007880 Hardigg Transit Case for TTV-196D + Cable + Transceiver

013503 Corrugated box for Transceiver (only)

013504 Corrugated box for Transceiver and CPU shipments

013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

SIS-1624 Shown in Optional Hardigg Case

36 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

INTEGRATED PACKAGES FOR SIS-1624

HYPACK® SURVEY PACKAGES

1624-5 TTV-196D Tow Vehicle DAS-550 CL-160 Transceiver (integrated with the DAC-450 with Hypack® Survey) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D Tow vehicle, Transceiver and Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

1624-6 TTV-196D-PTR Tow Vehicle with PTR DAS-550 CL-160 Transceiver (integrated with the DAC-450 with Hypack® Survey) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D Tow vehicle, Transceiver and Cable 013499 v

TRITON® SS-LOGGER PACKAGES

1624-1 TTV-196D Tow Vehicle DAS-510 CL-160 Transceiver (integrated with the DAC-410 with Triton® SS-Logger) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D Tow vehicle, Transceiver and Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

1624-3 TTV-196D-PTR Tow Vehicle with PTR DAS-510 CL-160 Transceiver (integrated with the DAC-410 with Triton® SS-Logger) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D Tow vehicle, Transceiver and Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

CHESAPEAKE® SONARWIZ.MAP PACKAGES 1624-2 TTV-196D Tow Vehicle DAS-520 CL-160 Transceiver (integrated with DAC-420 w/ Chesapeake® SonarWiz.Map) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D for Tow vehicle, Transceiver and Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

1624-4 TTV-196D-PTR Tow Vehicle with PTR DAS-520 CL-160 Transceiver (integrated with DAC-420 w/ Chesapeake® Sonar Wiz.Map) 011060 Kevlar Deck and Tow coax cable - 75m 013501 Wood crate for TTV-196D Tow vehicle, Transceiver and Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

See pages 51 - 52 for software package descriptions. 37 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

DIMENSIONAL DRAWINGS

CL-160 Transceiver DAC Rackmount (shown without monitor) 17.7 in (45 cm) 21 in (537 mm)

17.7 in (45 cm) 18.7 in 22 in (47.5 cm) (558 mm)

6 in (151 mm) 1.76 in (4.5 cm)

19.0 in (21.5 cm)

TTV-196D Tow Vehicle

17.4 in (44.2 cm)

17.8 in (45.2 cm)

6.4 in 5.7 in 4.5in (16.3 cm)(14.5 cm) (11.4 cm)

71.0 in (180.3 cm)

38 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

SYSTEM SPECIFICATIONS

TTV-196D TOW VEHICLE CL-160 TRANSCEIVER Physical Characteristics Physical Characteristics Construction 316 stainless steel Case Size 4.4 cm (1.75 in.) high by 48.3 cm (19.0 in.) wide Dimensions 11.4 cm (4.5 in.) outside diameter by 177.8 cm by 44.4 cm (17.5 in.) deep (70 in.) long Case Type 19 inch standard rack mount Weight in Air 34 Kg (75 pounds) Case Weight 7.0 kg (15.5 pounds) Weight in Water 25 Kg (55 pounds) approx. Input/Output Operating Depth 1,750 meters Tow Vehicle Uplink sonar data input, Uplink vehicle status in- Towing Speed 1 to 8 knots operational formation input, Uplink sensor data input, Down- Input Power 144 VDC, 32 watts nominal link commands output Side Scan Sonar External Responder key input, Sonar key input, Ethernet 10BaseT, ADSL serial (factory use only) Acoustic Source Level +225 dB re 1uPa@ 1 meter Range 25 to 500 meters each channel Power Requirements Chirp Frequency Range Simultaneous sweeps in the 110 kHz to 130 kHz Power Input 100-125 VAC or 220-240 VAC auto-sensing, 50- and 370 kHz to 390 kHz bands 60 Hz, 900 watts CW Frequencies Simultaneous 123 kHz and 383 kHz Power Output 144 VDC, 300 watts nominal, 600 watts maximum Transducer Radiation 0.5 degrees horizontal, 55 degrees vertical (110 Electrical power: 51 watts at 300 VDC kHz to 130 kHz band), 0.5 degrees horizontal, 35 degrees vertical (370 kHz to 390 kHz band) TOPSIDE DATA ACQUISITION COMPUTER (DAC) Receiver Gain User adjustable from 0 to 21 dB in 3 dB incre- Operating System: Windows XP ments Storage: Large capacity hard drive, writable Standard Sensors Heading / Pitch / Roll (TCM2.5) CD/DVD Optional Sensors Network Interface: 100/1000 base T Ethernet (compatible with Water Temperature Range, -2 to 38 degrees C; Accuracy, ± 0.5 de- ADSL communication interface) grees C Serial: RS232 x 4 Pressure (Depth) Range, 0 to 1,500 PSI; Accuracy, ± 0.5% of total Display Monitor: 20” Flat Panel (built into processor) range (other pressure sensors available) Responder 27 kHz standard configuration, compatible with SOFTWARE ORE Trackpoint II Acquisition: Triton, Hypack, Chesapeake Magnetometer Geometrics G880 Cesium, Magnetometer or Ma- Post-Processing (optional): Triton, Hypack, Chesapeake rine Magnetics SeaSpy Data Format: XTF

CABLES

Call for specific cable requirements Kevlar Deck Cable: 75 meter coax (default) Double Armored Tow Cable: Co-axial cable

39 TELEDYNE BENTHOS GEOPHYSICAL

SIS-1624 Dual Frequency Side Scan

40 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

Chirp III Sub-bottom Profilers

Teledyne Benthos is a pioneer in Chirp technology and was the first to bring a commercial Chirp sub-bottom profiling system to the market. Teledyne Benthos continues that advancement with the new Chirp III sub-bottom profiling system for deep water and the Chirp III sub-bottom profiling system for shallow water. The shallow water Chirp III is a lightweight, low cost system ideally suited for small boats and small budgets. Both Chirp III systems have versatile configurations that are designed to operate with a wide variety of tow vehicles and sound sources.

Applications Off-shore Hazard Surveys Pipeline & Small Object Surveys Bridge Piling Scour & Environmental Surveys Mining & Dredging

41 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

42 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

Chirp III Sub-bottom Proﬁler The TTV-170 and the TTV-290 series of tow vehicles are designed for hydrodynamic stability in most towing applications. The stainless steel midplate construction provides users with a rigid and stable platform to mount additional sensors. The high visibility yellow polyethylene covers are designed to handle years of use. These new and improved shells are more resistant to impact than earlier models, and are easy and cost effective to modify or replace.

The TTV-170 shell is designed to fit previous models of TTV-170 and is ideal for shallow water applications. The TTV-290 series vehicle offers the customer an upgrade path to either a 1625 or C3D with Sub-bottom vehicle and is ideal for deep water applications.

TTV-170 Series Tow Vehicle for TTV-290 Series Tow Vehicle for Shallow Water Deep Water

SUBSEA UNIT

TTV-171 TTV-170 Series Single Channel Chirp Shallow Tow Vehicle (3-200 meters) This tow vehicle includes (1) Low frequency (2-7 kHz) transmit projector (AT-471), receive hydrophone array, and all interconnecting cables.

TTV-172 TTV-170 Series Dual Channel Chirp Shallow Tow Vehicle (3-200 meters) This tow vehicle includes (1) Low frequency (2-7 kHz) transmit projector (AT-471), (1) High frequency (10-20 kHz) transmit projector (AT-12D7), receive hydrophone array, and all interconnecting cables.

TTV-291 TTV-290 Single Channel Chirp III Deep Tow Vehicle (3-2000 meters) TTV-290 tow vehicle includes a 2x2 Low frequency (2-7 kHz) Transducer array (AT-471), receiving hydrophone, and all interconnect cables.

TTV-292 TTV-290 Dual Channel Chirp III Deep Tow Vehicle (3-2000 meters) TTV-290 tow vehicle includes a 2x2 Low frequency (2-7 kHz) Transducer array (AT-471), (1) High frequency (10-20 kHz) transmit projector (AT-12D7), receiving hydrophone, and all interconnect cables.

43 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

SURFACE UNITS

Chirp III Transceivers

DSP-6641 Single Channel Chirp III Transceiver Chirp III Transceiver-single channel includes a 4KW power amplifier, heave compensation delay key, analog preamplifier gain 0, + 15dB,+30dB and single analog input channel, DSP hardware which provides the user with matched filter or digital processing for analog sources and multi-task operations.

DSP-6642 Dual Channel Chirp III Transceiver Chirp III Transceiver-dual channel includes a 4KW power amplifier, heave compensation delay key, analog preamplifier gain 0, + 15dB,+30dB and dual analog input channel, DSP hardware which provides the user with matched filter or digital processing for analog sources and multi-task operations.

Chirp III Transceiver (DSP-6641 / DSP-6642)

DAC-110 Computer with Triton® SB-Logger Software

DAC-120 Computer equipped with Chesapeake® SonarWiz.Map Software

See pages 51 - 52 for software package descriptions.

Digital Acquisition Computer w/ Monitor

44 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

CABLES (KEVLAR DECK ONLY - NOT FOR TOWING)

011022 Kevlar deck only multi-conductor cable with terminations - 75 M

ES LENGTH Additional length of Kevlar multi-conductor cable – per meter

Example: A 100 meter cable would be priced as a 75 meter cable with 25 meters of extra cable @ $30/meter ($4,850+ $750 =$5,600)

CABLES (ARMORED TOW CABLE)

011021 Armored Tow multi-conductor cable 0.50” dia. - 150M

ES LENGTH Additional length of Armored multi-conductor cable 0.50” dia. - per meter 001567 Armored Termination for multi-conductor cable

OPTIONS FOR CHIRP III HULL MOUNT

CHIRPIII-HULL Available Hull Mount configurations: HMA-1 Hull Mount - high frequency transducer: Hull mount configuration with an operating frequency of 10-20kHz, (1) transducer transmit/receive transducer configuration hardware and sea chest interconnect cables. HMA-4 Transducer Hull Mount Array - Shallow water option includes: Four transducers (2x2) (2-7kHz), transmit/receive array, configuration hardware and sea chest interconnect cables. HMA-9 Transducer Hull Mount Array - Shallow water option includes: Nine transducers (3x3) (2-7kHz), transmit/receive array, configuration hardware and sea chest interconnect cables. HMA-16 Hull Mount Array - Full Ocean includes: 16 transducers (4x4) (2-7kHz), transmit/receive array, configuration hardware and sea chest interconnect cables.

SHIPPING CASES

013502 Corrugated box for TTV-170 series Tow Vehicle + Cable

012692 Wood crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual

013504 Corrugated box, Chirp III Transceiver only

45 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

INTEGRATED PACKAGES FOR CHIRP III SUB-BOTTOM PROFILER SINGLE CHANNEL CHIRP VEHICLE PACKAGES - SHALLOW TOW

Chirp III-1 Chirp III Single Channel Shallow Tow Vehicle Package TTV-171 Single Channel Chirp Shallow Tow Vehicle DSP-6641 Single Channel Chirp III Transceiver DAC-110 Rackmount Computer for Sub-bottom Profile withTriton® SB-Logger 011022 Kevlar Deck Cable Multi-conductor - 75m 013502 Corrugated box for TTV-170 series Tow Vehicle+ Cable 013499 Corrugated box for DAC-100 Computer and Screen 013504 Corrugated box for Transceiver

Chirp III-2 Chirp III Single Channel Shallow Tow Vehicle Package TTV-171 Single Channel Chirp Shallow Tow Vehicle DSP-6641 Single Channel Chirp III Transceiver DAC-120 Rackmount Computer for Sub-bottom Profile withChesapeake® SonarWiz.Map 011022 Kevlar Deck Cable Multi-conductor - 75m 013502 Corrugated box for TTV-170 series Tow Vehicle + Cable 013499 Corrugated box for DAC-100 Computer and Screen 013504 Corrugated box for Transceiver

SINGLE CHANNEL CHIRP VEHICLE PACKAGES - DEEP TOW

Chirp III-4 Chirp III Single Channel Deep Tow Vehicle Package TTV-291 Single Channel Chirp Deep Tow Vehicle DSP-6641 Single Channel Chirp III Transceiver DAC-110 Rackmount Computer for Sub-bottom Profile withTriton® SB-Logger 011022 Kevlar Deck Cable Multi-conductor - 75m 012692 Wood Crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

Chirp III-5 Chirp III Single Channel Deep Tow Vehicle Package TTV-291 Single Channel Chirp Deep Tow Vehicle DSP-6641 Single Channel Chirp III Transceiver DAC-120 Rackmount Computer for Sub-bottom Profile withChesapeake® SonarWiz.Map 011022 Kevlar Deck Cable Multi-conductor - 75m 012692 Wood Crate for TTV-290 series Tow Vehicle+ Cable + Transceiver + DAC

See pages 51 - 52 for software package descriptions.

46 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

INTEGRATED PACKAGES FOR CHIRP III SUB-BOTTOM PROFILER DUAL CHANNEL CHIRP III VEHICLE PACKAGES - SHALLOW TOW

Chirp III-3 Chirp III Dual Channel Shallow Tow Vehicle Package TTV-172 Dual Channel Chirp Shallow Tow Vehicle DSP-6642 Dual Channel Chirp III Transceiver DAC-120 Rackmount Computer for Sub-bottom Profile with Chesapeake® SonarWiz.Map 011022 Kevlar Deck Cable Multi-conductor - 75m 013502 Corrugated box for TTV-170 series Tow Vehicle + Cable 013499 Corrugated box for DAC: Computer, Monitor, Keyboard, and Manual 013504 Corrugated box for Transceiver

DUAL CHANNEL CHIRP III VEHICLE PACKAGES - DEEP TOW

Chirp III-6 Chirp III Dual Channel Deep Tow Vehicle Package TTV-292 Dual Channel Chirp Deep Tow Vehicle DSP-6642 Dual Channel Chirp III Transceiver DAC-120 Rackmount Computer for Sub-bottom Profile with Chesapeake® SonarWiz.Map 011022 Kevlar Deck Cable Multi-conductor - 75m 012692 Wood Crate for TTV-290 series Tow Vehicle + Cable + Transceiver + DAC

See pages 51 - 52 for software package descriptions.

47 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

DIMENSIONAL DRAWINGS

Chirp III Transceiver (DSP-6641 / DSP-6642)

21.1 in (53.57 cm)

22.0 in (55.96 cm)

10.1 in (25.7 cm)

DAC Rackmount (without computer)

21 in (537 mm)

22 in (558 mm)

6 in (151 mm)

48 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

DIMENSIONAL DRAWINGS SUBSEA UNITS TTV-170 Series Tow Vehicle

37 in (940 mm)

17.13 in 18 in (434 mm) (457 mm)

16.75 in 17.63 in (425 mm) (446 mm)

TTV-290 Series Tow Vehicle 82.1 in (2087 mm)

42.8 in (1088 mm) 21.0 in (533 mm)

29.2 in (741 mm)

18.5 in (470 mm) 16.0 in (406 mm)

49 TELEDYNE BENTHOS GEOPHYSICAL

Chirp III Sub-bottom Profiler

SYSTEM SPECIFICATIONS SYSTEM TOPSIDE DATA ACQUISITION COMPUTER (DAC) Low Frequency: Chirp FM sweeps from 2 kHz to 7 kHz Operating System: Windows XP High Frequency: Chirp FM sweeps from 10 kHz to 20 kHz Storage: Large capacity hard drive, writable Maximum Operating Depth: TTV-170 Series (200 M) CD/DVD TTV-290 Series (2000M) Network Interface: 100/1000 base T Ethernet (compatible with Chirp III interface) Ping Rate 15 pings/second maximum Serial: RS232 x 4 Pulse Length: User selectable from 5 msec to 60 msec max. (ping rate dependant). Pulse waveforms Display Monitor: 20” Flat Panel stored in memory. TOPSIDE TRANSCEIVER Transducers AT-471, Chirp bands 2 to 7 kHz Power Supply: Input 120/240 VAC auto-sensing, output AT-12D7, Chirp bands 10 to 20 kHz 4 kw per channel maximum TOW VEHICLE (TTV-291/ TTV-292) Network interface: Ethernet Construction: Stainless steel, polyethelene Dimensions: 4U Rack mount 48.3 cm (19 inches) Length: 208.7 cm (82 in) SOFTWARE Front Cross Section: 38.4 cm x 53.3 cm (15 1/8 in x 21 in) Acquisition: Triton, Chesapeake Weight (in air): 158 kg (350 lbs) / 165 kg (365 lbs) Post-Processing (optional): Triton, Chesapeake Weight (in water): 45.0 kg (100 lbs) / 50 kg (110 lbs) Data Format: XTF TOW VEHICLE (TTV-171/ TTV-172) CABLES Construction: Stainless steel, polyethelene Call for specific cable requirements Length: 94.0 cm (37 in) Kevlar Deck Cable: 75 meter multi-conductor (default) Front Cross Section: 32.4 cm x 43.4 cm (12.7 in x 17.13 in) Armored Tow Cable: Multi-conductor cable Weight (in air): 34 kg (75 lbs) / 41 kg (90lbs) Weight (in water): 20 kg (45 lbs) / 25 kg (55 lbs)

50 TELEDYNE BENTHOS GEOPHYSICAL Miscellaneous Software Options

Teledyne Benthos offers a variety of software packages to support our sonar imaging systems. Our collaboration with outside software vendors assures that you will have access to the last innovations in underwater software programs that are compatible with Teledyne Benthos Geophysical Systems.

Chesapeake® Software Subsea System SonarWiz.Map, Chesapeake's flagship product for real-time mosaics, is currently being offered as an option to SonarWiz customers SIS-1624 who require real-time mosaic capabilities in an easy to use and affordable package. It also provides complete post processing SIS-1625 capabilities. Features include automatic gain control, time varied gain, beam angle correction, integrated bottom tracker and navigation Chirp III editor. Complete post-processing functions are also included.

Triton® Software Subsea System Triton Isis® Bathy is a complete bathymetric acquisition and processing package ready to be interfaced to any multibeam sonar. This C3D-TOW product delivers all features of an advanced bathymetry acquisition system and is the tool of choice for a variety of applications C3D-LPM including: archeology, environmental studies, oceanography, and hydrography. Triton Isis® Bathy™ integrates external sensors including GPS, MRU, SVP, & gyros and correctly logs and geo-references multibeam data. All data are stored in Triton's non-proprietary XTF format, an industry standard for multibeam and sidescan sonar data.

Triton Isis® SS-Logger™ is a new modular side scan sonar data logger. The easy-to-use, extensively field tested core components of SIS-1624 Isis® Sonar™ form the basis of the Isis SS-Logger. The software is fully flexible for upgrading as new survey requirements arise. The Isis SIS-1625 SS-Logger integrates external sensors, including GPS & gyros, and correctly logs and geo-references sonar imagery into XTF files. The SS-Logger for the SIS-1624 is delivered with two important features; target module and the ASCII report.

Triton Isis® SB-Logger™ is a state-of-the-art sub-bottom profiler and shallow seismic data acquisition, playback and processing system. C3D-SBP It is designed for easy setup and operation. Extraordinary features include a modern and intuitive User Interface with recoverable Chirp III "favorite" settings; prominent color coded warning messages for real-time quality control, and simplified interfaces showing only those parameters critical for accurate data acquisition. Innovative real-time and playback capabilities include a "scrubbing" tool and memory for rapid data review and analysis; image capture tools for export of selected profile sections as annotated bitmap files; and varietya of optional filters designed to enhance imagery and improve interpretation results.

Hypack® Software Subsea System HYPACK®SURVEY is a fully integrated hydrographic software package for survey design, data collection, navigation and positioning. C3D-TOW HYPACK®SURVEY allows the user to design survey, including line planning and collect data for bathymetric magnetometer, side scan C3D-LPM sonar, subbottom and ADCP surveys. Included in HYPACK survey is the sidescan interface. This module allows for the collection of all SIS-1624 analog and most digital sidescan sonars, providing waterfall and signal windows for single and dual frequency systems, target analysis and measurements, and provide a real time mosaic to visualize sonar data and swath coverage

Oceanic® Software Subsea System GeoDAS can acquire and process bathymetry from single and multi-beam sensors. Default on-screen tools display 2D bathymetry and C3D-TOW bathy ping profiles, while the 3D Bathy tool can display evolving bathy data in real time. The Bathymetry Properties Window allows C3D-LPM you to fine-tune bathy processing and display, and subwindows for Interferometry and Latency Calibration, as well as Tide Tool and Draft Settings windows allow further fine-tuning.

GeoDAS with RT Mosaic - Real-time geo-referenced mosaicing in GeoDAS allows you to maintain quality control and create mission SIS-1624 product output in processing mode. As mosaics evolve onscreen, you can adjust views and add other data. The Navigation window SIS-1625 can be configured to show targets, vector shoreline data and other navigation features. The Mosaic window can superimpose charts, target info, survey lines and waypoints onto the mosaic. GeoDAS real-time mosaics also support up to four layers of low and high frequency sidescan, bathymetry and/or amplitude data.

51 TELEDYNE BENTHOS GEOPHYSICAL Miscellaneous Software Options

CodaOctopus® Software Subsea System The Coda DA series is a purpose-built, turn-key hardware solution designed for the most demanding of offshore survey requirements SIS-1625 and is delivered pre-installed and ready to run. For the digital-only Teledyne Benthos series SIS1500/SIS1624 and SIS1625, the Coda SIS-1624 DA series software can be installed on any standard PC running Windows XP. The DA series is a highly flexible solution for all physicalgeo Chirp III data acquisition requirements. It has an extensive range of real-time and post-processing software tools such as Pipeline Inspection, Mosaicing and GeoKit interpretation tools. The DA2000 has four channels for simultaneous Side Scan and Sub-bottom data acquisition.

52 TELEDYNE BENTHOS GEOPHYSICAL Miscellaneous Letter of Credit/Bank Transfer

IRREVOCABLE LETTER OF CREDIT & BANK TRANSFER INFORMATION

Payment Made To: Teledyne Benthos, Inc. Payable To BNY Mellon Bank City/State Pittsburgh, PA 15262-0001 Acct. Title Teledyne Benthos, Inc. Swift Code MELNUS3P Routing # 043000261 Account # 000-3535

1. issue Irrevocable Letter of Credit in favor of: 2. Teledyne Benthos, Inc. 3. Using Mellon Bank 4. “IRREVOCABLE” Letter of Credit 5. All transactions are to be in English 6. All amounts to be in U.S. Dollars 7. Drafts of payments payable “AT SIGHT” 8. All banking charges are for the account of the “ACCOUNTEE” 9. Partial shipments permitted 10. Trans-shipments permitted 11. Shipping Terms: All shipments should be F.O.B. factory, North Falmouth, MA, USA 12. Airway Bill “CONSIGNED” to the “ISSUING BANK” 13. Please do not specify airline or forwarder 14. House airway bill should be acceptable

53 TELEDYNE BENTHOS GEOPHYSICAL Miscellaneous Shipping Weights and Dimensions

PRODUCT CONTAINER WEIGHT (lb/kg) DIMENSIONS LxWxH (in/cm)

Shipping Weights and Dimensions are provided as a guideline only. Actual weights and dimensions will vary depending on system configuration and number of components purchased.

TTV-290 Wooden Crate 680/308 87x33x46 / 221x84x117 (C3D, C3D-SBP, 1625, Chirp III)

C3D-LPM Gray Case 131 / 59 42x27x22/ 107x69x56

TTV-196D Gray Case 191 / 87 80x22x15/ 203x56x38

54 TELEDYNETELEDYNE BENTHOS BENTHOSGEOPHYSICAL GEOPHYSICAL Miscellaneous Terms and Conditions of Sale

1. DEFINITIONS 6. SHIPPING TERM/S AND RISK OF LOSS “Seller” means Teledyne Benthos, Inc. “Buyer” means the legal entity purchasing All domestic shipments by Seller are F.O.B. Seller’s place of shipment, as defined in Goods from Seller. “Goods” means the products offered by Seller and/or pur- the Uniform Commercial Code. All international shipments by Seller are Ex-Works, chased by Buyer. “Offer” means any quote, proposal, or offer to sell Goods pro- as defined by INCOTERMS 2000. Risk of loss for Goods will transfer to Buyer upon vided by Seller to Buyer. “Order” means any purchase order or similar instrument Seller presenting Goods to carrier. If Seller prepays shipping, insurance, or other issued by Buyer to Seller to purchase Goods. Seller and Buyer are sometimes re- related costs, Buyer agrees to reimburse Seller promptly for the actual costs in- ferred to herein individually as a “Party” and collectively as the “Parties”. curred by Seller. 2. ACCEPTANCE 7. TOOLING The terms and conditions included in this “Terms and Conditions of Sale” docu- Unless otherwise provided by special written agreement signed by Seller and ment (hereinafter, this “Agreement”) apply to all Offers made by Seller to Buyer Buyer, all tooling, fixtures, equipment, tools, and designs produced, acquired, or and all Buyer’s Orders accepted by Seller. Acceptance of Buyer’s Order, and any used by Seller for the purposes of filling Buyer‘s Order remain the property of the changes or amendments thereto, is expressly conditioned upon Buyer’s assent to Seller. these terms and conditions. Unless specifically agreed to in writing by a duly au- 8. PACKING AND PACKAGING thorized representative of Seller, Seller objects to, and is not bound by, any terms Seller’s prices for Goods include Seller’s standard commercial packing and packag- or conditions that differ from or add to the terms and conditions specified herein. ing. Any non-standard or special packing or packaging requirements requested by Seller’s failure to object to any terms and conditions or any other provisions con- Buyer will be provided by Seller at additional cost to Buyer. tained in any communication from Buyer, including, but not limited to, Buyer’s Or- 9. INSPECTION AND TESTS ders, does not waive any of the terms and conditions specified herein. Seller’s All Goods manufactured by Seller are subject to Seller’s standard inspection acceptance of any resulting Order or Buyer’s receipt of Goods, whichever occurs processes and, if applicable, acceptance testing at Seller’s facility. Any additional first, will conclusively evidence Buyer’s unconditional acceptance of these terms requirements, including, without limitation, Buyer’s source inspection or additional and conditions. testing, are at Buyer’s sole expense. If Seller and Buyer agree that Buyer is to in- 3. PRICES spect or provide for inspection at the place of manufacture, such inspection may Unless stated otherwise in writing by Seller, all prices are stated in U.S. Dollars and not interfere unreasonably with Seller’s operations and the Buyer’s approval or re- the prices offered are valid for a period of thirty (30) days from the date of Seller’s jection of Goods based on such source inspection and/or testing must be made Offer. The prices offered apply only to the specific quantities, specifications, and prior to shipment of the Goods. delivery schedules set forth in Seller’s Offer. Any variation in quantity, specifica- 10. EXPORT COMPLIANCE; FOREIGN CORRUPT PRACTICES ACT tions, or delivery schedules may necessitate a price and/or delivery schedule ad- For any resale, export, or re-export of the Goods, Buyer must comply with all appli- justment. Unless stated otherwise, all prices for domestic deliveries are F.O.B. cable export regulations, export licensing requirements, and the United States For- Seller’s place of shipment, as defined in the Uniform Commercial Code (UCC), and eign Corrupt Practices Act (FCPA), 15 U.S.C. §§ 78dd1 through 78dd3, as all prices for international deliveries are Ex-Works, as defined by INCOTERMS amended. 2000. 11. DELIVERY SCHEDULES AND FORCE MAJEURE 4. CREDIT APPROVAL AND PAYMENT Shipping dates are approximate and require prompt receipt of all necessary Buyer- Standard payment terms are net thirty (30) days from date of Seller’s invoice, sub- furnished information and material if applicable. ject to credit approval of Buyer by Seller. Credit terms, shipments, and perform- Seller is not liable for any damages, re-procurement costs, or penalties related to ance of work are at all times subject to the approval of Seller’s Credit Department. late deliveries. Without limiting the generality of the foregoing, Seller is not liable Each shipment is a separate and independent transaction and payment must be for delays due to force majeure, including, but not limited to, weather conditions, made by Buyer accordingly. acts of God, acts of civil or military authorities, fires, strikes, job actions, floods, If, prior to shipment of Buyer’s Order, Buyer fails to fulfill the terms of payment of earthquakes, epidemics, quarantine restriction, war, terrorism, riot, supplier or ven- any prior invoice submitted by Seller, or if, in the opinion of Seller, Buyer’s financial dor delays, or any other causes beyond the reasonable control of Seller. In the condition becomes impaired or unsatisfactory, Seller reserves the right to change, event of such delay, Seller will promptly notify Buyer and the date(s) of delivery without notice, the terms of payment and/or delay or discontinue further ship- will be deferred for a period commensurate with the time lost due to the delay. If ments, without prejudice to any other available legal remedies, until past due obli- the excusable delay under force majeure continues for more than ninety (90) days, gations have been paid and Seller has received acceptable assurance regarding Seller and Buyer will each have the option of terminating the affected Order(s) Buyer’s prompt payment of future obligations. All amounts due to Seller but not under Article 12, Termination for Convenience. If Seller’s production is curtailed paid by Buyer on the due date bear interest payable by Buyer to Seller in U.S. Dol- for any of the above reasons so that Seller is unable to deliver the full quantity of lars at a rate that is equal to the lesser of (i) one and one-half percent (1.5%) per Goods scheduled for delivery to Buyer, Seller may allocate deliveries of available month, or (ii) the maximum interest rate permitted under applicable law. Interest Goods among its various customers then under order for similar Goods. The allo- accrues on the balance of unpaid amounts as of the date on which portions of cation will be made in a commercially fair and reasonable manner. When such allo- those amounts become due until the date payment is received by Seller. Buyer will cation has been made, Buyer will be notified of the estimated quota made also be liable to Seller for any expenses incidental to collection of past due available. amounts, including reasonable attorney’s fees and court costs. In the event of 12. TERMINATION FOR CONVENIENCE Buyer’s bankruptcy or insolvency, Seller is entitled to terminate any Order then Buyer may request to terminate Buyer’s Order for convenience in whole or in part outstanding and to receive reimbursement for termination costs and expenses as and Seller agrees to cooperate with Buyer in attempting to make such arrange- provided under Article 13, Termination for Default. ments conditioned on Buyer paying Seller for all deliveries made and for all work 5. TAXES in process, including all applicable direct and indirect costs, settlements with sup- The amount of any present or future sales, use, excise, import duty, or other tax ap- pliers, and related administrative, accounting, and legal costs, plus a normal profit. plicable to the manufacture, sale, or lease of Goods will be added to the invoice To the extent possible, Seller will use reasonable commercial efforts to divert mate- and must be paid by Buyer, unless the Buyer provides Seller with a tax exemption rials and work in process from Buyer’s Order to other customers’ orders in order to certificate acceptable to the applicable taxing authority. minimize Buyer’s termination costs.

55 TELEDYNETELEDYNE BENTHOS BENTHOSGEOPHYSICAL GEOPHYSICAL Miscellaneous Terms and Conditions of Sale

13. TERMINATION FOR DEFAULT 18. LIMITATION OF LIABILITY Either Party may terminate the Order if the other Party breaches a material provi- NOTWITHSTANDING ANY OTHER PROVISIONS OF THIS AGREEMENT, UNDER sion of this Agreement or of the Order. In the event that a Party (the “Defaulting NO CIRCUMSTANCES IS EITHER PARTY LIABLE FOR ANY CONSEQUENTIAL, Party”) is in breach of a material provision of this Agreement or the Order, the SPECIAL, INCIDENTAL, INDIRECT, MULTIPLE, ADMINISTRATIVE, OR PUNITIVE other Party (the “Non-Defaulting Party”) will submit a written cure notice to the DAMAGES, OR ANY DAMAGE OF AN INDIRECT OR CONSEQUENTIAL NA- Defaulting Party advising of such breach. The Defaulting Party will have five (5) TURE ARISING OUT OF OR RELATED TO ITS PERFORMANCE UNDER THIS days to cure the breach. If the Defaulting Party does not cure the breach within the AGREEMENT, WHETHER BASED UPON BREACH OF THIS AGREEMENT, WAR- five (5) day period, the Non-Defaulting Party may terminate the Order. RANTY, OR NEGLIGENCE AND WHETHER GROUNDED IN TORT, CONTRACT, 14. CHANGES ORDERS AND AMENDMENTS CIVIL LAW, OR OTHER THEORIES OF LIABILITY, INCLUDING STRICT LIABILITY, All change order requests must be submitted by the Buyer to the Seller in writing EVEN IF ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. and will not be effective unless and until Seller consents in writing to the change. SELLER’S TOTAL LIABILITY INCLUDING, BUT NOT LIMITED TO, LIABILITY FOR Seller will advise Buyer in writing of the price and/or delivery schedule impact, if INDEMNITY, DEFENSE, AND HOLD HARMLESS OBLIGATIONS IS LIMITED TO any, of the change request. Seller’s acceptance of changes will be subject to Buyer’s NO MORE THAN THE AMOUNT PAID TO SELLER UNDER BUYER’S ORDER AND agreement to any price and/or delivery schedule adjustments. BUYER AGREES TO INDEMNIFY SELLER FOR ANY EXCESS AMOUNTS. TO THE EXTENT THAT THIS LIMITATION OF LIABILITY CONFLICTS WITH ANY OTHER 15. LIMITED WARRANTY PROVISION(S) OF THIS AGREEMENT, SUCH PROVISION(S) WILL BE REGARDED Seller warrants that the Goods delivered under Buyer’s Order will be free from de- AS AMENDED TO WHATEVER EXTENT REQUIRED TO MAKE SUCH PROVI- fects in material and workmanship for a period of twelve (12) months from the SION(S) CONSISTENT WITH THIS PROVISION. date of original shipment, except for components and consumables that have shorter third party manufacturer’s warranty periods. Components and consum- 19. ARBITRATION AND LAW ables manufactured by third parties bear the warranty of their manufacturer. Disputes that arise under this Agreement or Buyer’s Order that cannot be settled amicably by the Parties will be settled by arbitration in Boston Massachusetts in the The specific warranty for a given product is the one in effect on the date of ship- United States of America under the prevailing rules of the commercial conciliation ment. In the event that Buyer identifies any defects in material or workmanship, and arbitration rules of the American Arbitration Association. Judgment upon the Buyer will promptly notify Seller of the defective Goods and the specific nature of arbitration award or decision may be entered in any court of competent jurisdic- the defect in accordance with Article 16, Return Authorizations. tion. Arbitration awards and decisions are subject to Article 18, Limitation of Liabil- Seller, at its sole discretion, will either repair or replace any such Goods found by ity. Seller to be defective. Seller’s warranty does not apply to any Goods that have The laws of the Commonwealth of Massachusetts excluding its conflicts of laws pro- been subjected to improper installation, misuse, alteration, repair, neglect, acci- visions and excluding the United Nations Convention on the International Sale of dent, inundation, fire, or the like. Goods (“CISG”), govern the interpretation and enforcement of this Agreement and THESE EXPRESS WARRANTIES, INCLUDING REMEDIES, ARE EXCLUSIVE AND Buyer’s Order. ARE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NO 20. ASSIGNMENT WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Buyer may not assign or transfer this Agreement or any Order, in whole or in part, POSE IS INTENDED OR GIVEN. IN THE CASE OF GOODS OTHER THAN THOSE without the prior written approval of Seller. OF SELLER’S OWN MANUFACTURE, SELLER MAKES NO WARRANTIES, EXPRESS, STATUTORY, OR IMPLIED. 21. ETHICS AND VALUES Seller is committed to uncompromising ethical standards, strict adherence to law, 16. RETURN AUTHORIZATIONS and customer satisfaction. Buyer is encouraged to communicate any concerns or Buyer will promptly notify Seller of any nonconformance(s) in the Goods and af- questions regarding the ethics and value to the Teledyne Corporate Ethics Help ford Seller a reasonable opportunity to inspect the Goods. No Goods may be re- Line, “Take the Right Action”, at 1-877-666-6968. turned without Seller’s prior authorization, as evidenced by a return authorization. Once a return authorization number is obtained, Buyer will return defective Goods 22. UNENFORCEABLE PROVISIONS transportation and insurance prepaid in accordance with instructions issued by In the event that one or more provisions of this Agreement document is held to be Seller. Failure to follow Seller’s return procedures may result in lost Goods, delays, unenforceable, the remaining provisions apply in full and the invalid or unenforce- additional service, restocking charges, warranty denial, or refusal of a shipment. able provision will be replaced by a provision that lawfully enforces the Parties’ in- The return authorization number must appear on the shipping label along with all tention underlying the invalid or unenforceable provision. paperwork associated with the return. Seller has the right to reject Goods returned 23. SURVIVAL without the correct return authorization number clearly marked on the outside of The following Article will survive the termination or expiration of this Agreement the shipping container. Granting a return authorization number does not necessar- or any Order: 1: Definitions; 4: Credit Approval and Payment; 5: Taxes; 6: Shipping ily mean that a credit will be approved or that the evaluation or repair will take Terms and Risk of Loss; 7: Tooling; 9: Inspection and Tests; 10: Export Compliance; place without a fee. Foreign Corrupt Practices Act; 11: Delivery Schedules and Force Majeure; 12: Ter- 17. INDEMNIFICATION mination for Convenience; 13: Termination for Default; 15: Limited Warranty; 17: Each Party (the “Indemnifying Party”) will hold harmless and indemnify the other Indemnification; 18: Limitation of Liability; 19: Arbitration and Law; 20: Assign- Party (the “Indeminitee”) against all claims, judgments, costs, and fees, including at- ment; 22: Unenforceable Provisions; and 23: Survival. torney fees, relating to infringement of U.S. patents, designs, copyrights, or trade- 24. WHOLE AGREEMENT; AMENDMENT marks to the extent that the infringing Goods are manufactured, sold, or used in This document is the entire understanding between the Parties, and it supersedes whole or in part to the Indemnifying Party’s specifications, designs, drawings, or all previous or additional agreements, arrangements, and drafts. This document other technical data. may be amended or modified only by written agreement of duly authorized repre- To the extent that one Party’s employees or agents enter on the property owned sentatives of both Parties. or controlled by the other Party, the first Party will indemnify and hold harmless the other Party, its officers, directors, and employees for any property damage or bodily injury or death caused by the first Party’s employees or agents.