Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
Motorola Moto X 2nd Generation Teardown
撰写者: Sophia
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 1 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12 介绍 [video: https://www.youtube.com/watch?v=L1Tgi1Aa9gI] 工具: T3 Torx Screwdriver (1) iFixit Opening Picks set of 6 (1) Spudger (1) Tweezers (1)
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 2 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 1 — Motorola Moto X 2nd Generation Teardown
Remove SIM card tray.
步骤 2
Insert the eject pin into the hole inside of the port and push to open a gap between back cover and frame.
Place the guitar pick into the gap.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 3 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 3
Slide the guitar pick to cut the adhesive sticker under the cover. It's a little strong. Finally, peel off the soft back cover.
步骤 4
Remove those two rubber cover.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 4 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 5
Release the side button flex connector and battery connector respectively under the rubber cover.
步骤 6
Twist off all 18 screws on the middle housing and remove it easily.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 5 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 7
Remove the logo.
步骤 8
Get the flex loosen from battery
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 6 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 9
Get the flex loosen from the battery.
步骤 10
Pull the battery sticker and pry up the battery.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 7 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 11
Twist off the screw and pry up the securing bracket.
步骤 12
Remove the side buttons flex.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 8 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 13
Release LCD connector.
步骤 14
Release digitizer connector.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 9 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 15
Pry up the motherboard and remove it carefully. At that time, we can separate the LCD screen from motherboard and get it alone.
步骤 16
Release the connector and remove the rear camera.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 10 / 11 页 Motorola Moto X 2nd Generation Teardow… 指南 ID: 40630 - 草案: 2015-06-12
步骤 17
Remove front camera.
步骤 18
Done.
To reassemble your device, follow these instructions in reverse order.
æ¤ æ–‡æ¡£ç”Ÿæˆä ºŽ 2021-01-10 03:15:51 AM (MST)。 © iFixit — CC BY-NC-SA zh.iFixit.com 11 / 11 页