® Read Instructions Foredom Before Use! IMPORTANT Instructions Angle Grinder Attachment Foredom® Optimum Motor Operating Speed Includes: 2 hubs for 3/8″ Angle Grinder Attachment is 5,000 –15,000 RPM. Versatile Angle Grinder attaches to Max. Speed: 18,000 RPM. ® arbor hole wheels, 120 Please read these safety instruc- Foredom handpieces H.30 , H.30H, grit flap wheel (installed), 1 to .75 gear reduction reduces and H.30SJ. It is quality-machined, tions before operating this . velcro-type disc , They are for your protection and speed by 25% (see yellow chart). sturdy and compact. Use for a Screw-Lok mandrel, should always be followed to Even with gear reduction, run- broad range of grinding, sanding, assorted sanding discs, reduce the risk of personal injury ning motor at maximum speed polishing and and for attaching. or damage to the handpiece. is unsafe and will lead to heat, finishing work Add-on accessories Safety Instructions vibration, and premature wear of available separately. the grinder. For best performance, with 2″ and Never operate this Angle Grinder smaller discs run the motor between half and in Reverse motor rotation or at three-quarter speed. Use a light and 3/8″ arbor high speed. hole wheels. touch on your foot pedal and Always wear proper eye protec- avoid depressing it fully or use a tion while using this attachment dial control. ® on your H.30 handpiece. Virtually maintenance-free, Do not wear loose fitting clothing requires no lubrication! or jewelry. Tie back long hair. Never immerse the unit in Keep your hands away from the any cleaning solution! moving accessory. Inspect the Angle Grinder and Secure the in a vise Drive Cup after every 50 hours of or other type of clamp. use. Make sure that the spindle Always use a proper dust collec- rotates freely when removed from Made for tion system or wear a respirator the H.30® handpiece. Foredom’s to prevent the inhalation of dust H.30® One Year Wipe off with a damp rag only. particles or other debris. Handpiece! Limited Warranty Do not use compressed air as Specifications: Make sure your dust particles may be forced into 1 Length: 3 ⁄8″ is unplugged when you are the ball bearings or gears and 1 Width: 2 ⁄2″ (at widest) changing accessories or cause damage. Optimum Motor Operating Speed: 3 Depth: 2 ⁄4″ performing maintenance. One Year Limited Warranty 5,000 –15,000 RPM. Arbor Shaft has a Do not apply excessive pressure Please retain your proof of Max. Speed: 18,000 RPM for short intervals M8 x1.0 thread against the wheel or disc. purchase for warranty repairs 1 to .75 gear reduction Let the tool do the work. or replacement. www.foredom.net Foredom Motor – Speed RPM Angle Grinder RPM Angle SR – Full Speed 18,000 13,500 Grinder Foredom Electric Co. Provides Bethel, CT 06801 USA TX – Full Speed 15,000 12,250 Gear

AK69110 SR – Half Speed 9,000 6,750 F-1363 9/16 n Printed in USA Reduction LX – Full Speed 5,000 3,750 1 to .75

Foredom Angle Grinder Attachment Kit AK69110 includes: A-2202 120 grit Flap Wheel Max. Speed 10,000 RPM comes installed on Angle Grinder Head A-69218 A-69219 with supplied A-69212 Short Hub and UA690 Open-End 3mm Hex Key Mounting Screw Wrench Assorted 2″ and Discs used with Screw-Lok Mandrel Max. Speeds listed below

A-69217 Face Spanner Wrench Safety Shield UA690 Collar Holdfast Screw A-69210 Drive Cup

A-69212L 8mm thick Long Hub with 14mm long Mounting Screw UA691 A-69225 Screw-Lok Disc Mandrel A-69222 Disc Mandrel & Assorted Contact your favorite Foredom® 2″ Sanding Discs, Velcro® Discs for dealer for more information. attaching Max. Speeds For video instructions and listed below maintenance information go to: www.foredom.net Attaching Angle Grinder Head 1 Removing and Installing Accessories to H.30® Handpiece 3/8″ Diameter Arbor Hole Accessories Remove handpiece from flexible shaft 7. To remove the flap wheel mounted on before mounting angle grinder. your angle grinder insert open-end wrench 7 1. Use the key to open the 3-jaw (A-69218) onto flats on angle grinder spindle safety chuck on your handpiece. through the slot in the open end of the safety shield shield. You may need to turn spindle to align 2. Insert and tighten the drive cup the flats so the wrench fits securely all the (A-69210) until drive cup head is flush 2a way in. with the chuck jaws. 8. While holding the open-end wrench firmly, 3. Loosen angle grinder collar holdfast insert 3mm hex wrench (A-69219) into wheel 8 screw (UA690). mounting screw and turn counterclockwise. 9. Remove 5mm (A-69212) Short Hub with Never 8mm (UA690) screw from flap wheel and operate this 2b 3 insert new accessory with the same arbor Angle Grinder hole thickness. Hubs for 3/8″ Diameter Arbor Hole screw in Reverse. 9a short hub Accessories (included) 4. Align and match short long up the hole in the drive cup with square inner 4 drive shaft in angle grinder spindle and insert handpiece until it bottoms out into press down on flap mounting collar. wheel & hub pops out 5. Tighten collar holdfast screw. A-69212 5mm A-69212L 8mm Short Hub with Long Hub with 9b 6. Check that the handpiece is engaged 8mm Screw UA690 14mm Screw UA691 by the mounted flap wheel or accessory by hand while looking into 5 Accessories with arbor hole thickness from bottom of handpiece to ensure that 1/32″ (1mm) – 5/32″ (4mm) require the handpiece keyway or spindle is rotating. Short Hub with 8mm screw (A-69212). Accessories with arbor hole thickness from When you are sure that the Angle ® 5/32″ (4mm) to 9/32″ (7mm) use the Red Typhoon disc Grinder head is attached properly, you shown above is not ® Long Hub (A-69212L) with can reconnect the H.30 handpiece to included in AK69110 the flexible shaft. 14mm mounting screw. Make sure your power tool 6 is unplugged when you are Visit www.foredom.net to view changing accessories! videos on this product.

Important note: To prevent excessive run-out Always be sure the hub extends at least 1/32″ Imperial™ Microfinishing Included with your or 1mm from the bottom of the accessory into Film PSA Discs: Angle Grinder A-4594 Screw-Lok Discs Also Included the Inner Wheel Arbor (A-69213 shown in 320 grit PSA Sanding Discs step 10 photo). A-3604 with your Angle The Angle Grinder comes with Sandpaper 9 sanding discs, a Disc Holder Grinder A-4593 Disc, 10-11. Insert new accessory with hub into 10 Protector Pad, and 5 PSA Screw-Lok Disc Inner Wheel Arbor (A-69213) and tighten 400 grit 120 grit (Pressure Sensitive Adhesive) 6-holes Mandrel and wheel mounting screw with 3mm hex Velcro® discs. To use the Three 2″ Discs A-3602 wrench while holding the open-end wrench A-4592 sanding discs with the A-69222 Max. Speed 10,000 ® Sandpaper to prevent spindle from turning. 600 grit Disc Mandrel a PSA Velcro RPM Screw-Lok Disc disc (A-10041) must be Disc, 40 grit Mandrel screws onto Installing Disc attached to the back of the A-69213 A-5632 6-holes the Angle Grinder. It Inner Wheel Arbor PSA sanding discs. The Velcro® has a threaded hole for Aluminum A-3522 (or similar Oxide disc insulates the sanding attaching discs with accessory) disc, prevents slippage and Abrasive a plastic screw back. 11 PSA disc Pad, 80 grit 60 grit allows removal and reuse of The Sandpaper Discs directly to the the sanding discs. Velcro-type Threaded Spindle overhang the backing A-69222 Velcro- backed discs can also be used for smooth sanding ® A-69225 Type Disc Mandrel A-5683 USE with Optional Velcro Sanding edges and flexibility Ceramic Heads below. Screw-Lok Follow steps WITH Disc Mandrel on sanding contours. Purple PSA See Installing Disc 7 – 9 to remove disc 80 grit Max. Speeds: PSA sanding discs 10,000 RPM Mandrels at left, accessory 12 steps 7– 13. and hub. To properly install the sanding A-10041-5 discs: Carefully line up the 12. Remove Inner PSA ® sanding disc and the PSA disc Wheel Arbor (A-69213) Velcro discs 5-pk. with the disc mandrel so that A-69225 Screw- by holding open-end USE the mandrel is centered. An Lok Disc Mandrel wrench (A-69218) in WITH even, exposed edge will be spindle flats to prevent spindle from turning A-69222 visible around the mandrel’s ® and inserting pins on Face Spanner Wrench 13 Velcro Type edge. If it looks off center, (A-69217) into holes on inner wheel arbor Disc Mandrel remove and replace it until it and turning counterclockwise to unscrew looks centered and press down to secure it to the surface. and remove. Discs should Do Not Mount If Sanding Discs are 13. Mount and screw on mandrel with a be Centered Discs Off-Center 8mm X 1.0mm thread such as the Disc installed Off Center it can cause vibration, premature Mandrel (A-69222), Screw-Lok Disc Mandrel (A-69225), wear of both sanding disc Optional Quick Change Arbor (A-69223) shown below or and mandrel. It may hit the Optional Adapter (A-69224) shown on reverse. While safety shield when rotating. holding open-end wrench in spindle flats to prevent spindle rotation. Tighten mandrel or arbor snugly. Add Ons Add Ons

2 Cut Off Wheel 3/8″ Diameter Arbor Hole ® ″ Velcro & Foam Sanding Heads No Arbor hole A-69212 5mm 3/8″ Diameter Arbor Holes Velcro® surfaces USE WITH Short Hub short hub

A-D11 Max. Speed 30,000 RPM 2″ x 3/64″ thick, 60 grit, Fiberglass Reinforced Cut- Off Wheels are used to cut off, groove, and trim metal, wood, and ceramics. P/N A-10043 A-10044 A-10045 A-10046 A-10047 A-10048 2″ Sanding Flap Wheels Density Xtra Firm Firm Medium Soft Soft Soft 3/8″ Diameter Arbor Hole A-69212 5mm Thick 3/16″ 5/16″ 3/8″ 5/8″ 1/4″ 1/2″ USE WITH Short Hub USE short hub Max. Speed 20,000 RPM Sanding Heads can WITH vary the firmness of pressure from an abrasive long disc. Use PSA Velcro® Disc A-10041 to attach hub sanding discs to sanding heads. Heads with arbor holes have a velcro hook surface and 2″ Sanding Flap Wheels 3/8″ Diameter Arbor Hole mount onto the Angle Grinder with the 8mm A-69212L 8mm Long Hub (A-69212L). Sanding Heads without Max. Speed 10,000 RPM Aluminum oxide sanding flap wheels are Long Hub arbor holes attach to a A-37005 Screw-Lok made of high-grade mineral and a bonding system which reduces shell- Disc backs with Velcro Hook fronts, attach to a ing of the mineral and mounted on a solid surface. These economical A-69225 Screw-Lok Mandrel (shown below) or abrasives are excellent for fast clean-up and pre-polishing work. onto A-69222 Velcro Hook Surface Mandrel so that they can mount onto the Angle Grinder. Part No. Grit Part No. Grit AK2200 Assortment, Individual A-10041 A-2201 60 A-2204 320 1 ea. 60, 120, 240, PSA Velcro® disc For Sanding Heads and Discs with A-2202 120 A-2205 600 320 & 600 grit. A PSA Velcro® disc No Arbor Hole USE WITH A-2203 240 insulates the sanding disc with Velcro loop surface, prevents slippage, allows you to attach sanding discs to a velcro-type disc mandrel or Velcro Head and to Velcro Front Screw-Lok Back remove and reuse A-69225 sanding discs. A-37005 Screw-Lok Disc with Screw-Lok A-10041-5 5-pack Velcro Hook surface Disc Mandrel

Quick Change Sanding Discs Max. Speed 15,000 RPM Economical Quick Change Discs have an aluminum oxide abrasive with a hard plastic slotted back that requires a Quick Change Arbor. The 2″ discs overhang the plastic backing and offer smooth sanding edges and flexibility for sanding contours. 2″ diameter 10-Packs AK2260 10pc. Assortment, 2 of ea. grit A-2261-10 60 grit USE A-2262-10 120 grit WITH A-2263-10 240 grit 2″ Screw-Lok Aluminum Oxide Sandpaper Discs Surface A-2264-10 320 grit A-69223 with 6 holes (photo above) Max. Speed 10,000 RPM Optional Part No. Grit A-2265-10 600 grit Quick Change Arbor Screw-Lok Sandpaper Discs screw into 1″ diameter 10-Packs with Cross Bar A-3601 24 the Screw-Lok Mandrel (A-69225 – shown AK2240 10pc. Assortment, 2 of ea. grit. A-3602 40 above). A 40 & 120 grit disc are included Back with slot A-2241-10 60 grit A-3603 80 with the Angle Grinder. Other grits are A-2242-10 120 grit A-3604 120 also available. The 2″ discs overhang the plastic backing A-2243-10 240 grit A-3606 240 for smooth sanding edges and flexibility Surface A-2244-10 320 grit A-3607 320 on sanding contours. A-2245-10 600 grit A-3608 400 A-3609 600 Back with slot 14a 14b Attaching Quick Assortments Change Sanding AK3600 2 ea. 24, 40, 80, 120, 240, 320, 400 & 600 grit 16 pc. Discs to the Arbor AK3610 2 ea. 24, 40, 80, & 120 grit 8pc. Follow steps 13 -14b AK3620 2 ea. 240, 320, 400 & 600 grit. to install Quick Change Arbor A-69223. 15 16 14. When Quick Change Arbor is in place, select a Quick Change Disc. 15. Align and attach Quick Change Arbor cross bar into cross bar mounting slot in quick change disc back. 16. Rotate or turn Quick Change Disc until cross bar is fully engaged. To remove Quick Change Discs reverse steps 15 – 16 above. Add Ons Fine Polishing, Microfinishing, and Sanding Diamond Microfinishing Sanding Discs Film Disc on stone, glass and metals Pressure Sensitive Adhesive Discs Contact your favorite A Velcro® loop fabric surface is required to adhere these discs to the Foredom® dealer for velcro-type hook surface of the A-69222 Disc Mandrel or velcro-type Sanding Heads. The Velcro® disc insulates the sanding disc, more information. prevents slippage and allows removal and reuse of sanding discs. A-4452 A-4453 A-4454 A-4455 A-4456 A-4457 A-4583 For video instructions and USE USE USE WITH USE A-69222 maintenance information Cerium Oxide Disc WITH WITH WITH Disc Mandrel A-10041 or velcro go to: ® PSA Velcro sanding www.foredom.net Disc heads

A-4408 Cerium A-10041 A-69222 Disc Mandrel 2″ Diamond Microfinishing Sanding Disc and Oxide Disc PSA Velcro® Disc or velcro sanding heads Diamond Lapping Film Disc with (PSA) Pressure Sensitive Adhesive Backing 2″ Roloc End Brushes 2″ Cerium Oxide Trizact Polishing Disc Max. Speed 10,000 RPM 3M Diamond Microfinishing abrasives Max. Speed 10,000 RPM with (PSA) Pressure Sensitive Adhesive Backing have flexible film backing suitable for metal working and lapidary Part No. Grit Color applications. They work great on all materials including stone, glass Max. Speed 10,000 RPM Use 3M Cerium Oxide Abrasives for A-4504 36 green achieving a final, high shine polish on gemstone, rock and glass. and hard to work on and titanium. When working They should be used wet. Results are also best when used following with gemstone, rock and glass they should be used wet. Use 3M A-4505 80 yellow Imperial™ Diamond Lapping Film Disc (A-4583) for lapidary and a 1,200 – 3,000 grit abrasive. A-4506 120 white A-4408 Cerium Oxide Trizact .5 micron 50,000 grit . Use wet to reduce heat buildup and loading. The strong, flexible 3-mil backing adheres to A-10041 PSA Velcro® Disc Mount with A-69225 Imperial™ Microfinishing Film Discs attached to a mandrel or sanding head. Screw-Lok Mandrel. AK4400 7pc. Assortment with 1 of each disc listed below. Part No. Micron Grade Grit Part No. Micron Grade Grit A-4452 125 120 A-4456 20 600 A-4453 74 220 A-4457 9 1200 A-4454 45 320 A-4583 3 4000 A-4591 A-4592 A-4593 A-4594 A-4596 A-4598 A-4455 30 400 USE WITH USE A-69222 WITH Disc Mandrel A-10041 or velcro PSA Velcro® sanding Disc heads Carving, Texturing, Cleaning, Finishing, Blending, Burnishing, Pre-polishing and USE WITH 2″ Imperial™ Microfinishing Film Disc Polishing all precious & non-precious metals, with (PSA) Pressure Sensitive Adhesive Backing hard & soft wood, acrylics, and ceramics Max. Speed 10,000 RPM Use 3M Imperial Microfinishing Film PSA discs dry on metal and wet on stone. High strength polyester 6-packs of 2″ Radial Bristle Discs film backing coated with premium, micron graded aluminum oxide particles provides greater cutting efficiency and is resin bonded for increased durability. This fast-cutting abrasive provides gentle, contoured polishing. 10-Packs Grit / Micron 10-Packs Grit / Micron A-4591-10 1200 / 9 A-4594-10 320 / 40 Yellow White Red Blue Pink Peach Lt. Green A-4592-10 600 / 15 A-4596-10 220 / 60 A-4542-6 A-4543-6 A-4544-6 A-4545-6 A-4546-6 A-4547-6 A-4548-6 A-4593-10 400 / 30 A-4598-10 180 / 80 Motor 2 Discs: 80 grit 120 grit 220 grit 400 grit 1,200 grit 3,000 grit 14,000 grit Rotation Use A-69212 Pumice 6 micron 1 micron shown in SHORT (5mm) Forward Hub Flexible Diamond Sanding Discs 2″ Radial Bristle Discs USE WITH USE WITH Max. Speed 10,000 RPM 3/8″ Diameter Arbor Hole Max. Motor 4 Discs: Scotch-Brite™ patented radial bristle discs are molded plastic discs Rotation Use A-69212L embedded with a blend of patented 3M Cubitron™ and aluminum oxide shown in LONG (8mm) mineral. Cubitron is a tough, long lasting ceramic aluminum oxide Forward Hub mineral with sharper edges than regular aluminum oxide. The abrasive A-69222 A-10041 PSA Velcro® Disc filled bristles apply a continuous fresh supply of mineral to the work Disc Mandrel or piece eliminating the need for compounds. The flexible bristles will reach 2 Flexible Diamond Sanding Discs velcro sanding into grooves and contours on irregular surfaces or work on flat areas. Installing 2″ Radial Bristle Discs ″ heads with (PSA) Pressure Sensitive Adhesive Backing They can clean and remove dirt, rust, and oxidation without damage to 3/8″ Diameter Arbor Hole Max. Max. Speed 10,000 RPM 3M Flexible Diamond discs are made the underlying surface. They run cool and will not load up with removed 1. You can mount up to 2 Radial Bristle Discs on from a 2-ply polyester backing film evenly coated with diamond filled material. Because no compounds are needed these discs generate the 5mm Short Hub (A-69212) and 4 Radial Bristle nickel plated dots. Grind, sand, and smooth wet or dry on glass, far less dust. Varying the speed allows you to obtain different surface Discs on the 8mm Long Hub carbide, composites, plastic, enamels, stone, steel, exotic alloys, textures and finishes. (A-69212L). gypsum, ceramics, wood, bone, chrome cobalt, painted or plated Depending on number of discs 2. Mount the discs so that the bristles curve surfaces. When working with gemstone, rock, ceramics, bone and USE WITH Short or Long Hub clockwise from the base to the tip. glass they should be used wet. 3. Remove 5mm Short Hub with 8mm wheel 2″ Flexible Diamond Sanding Discs Part Nos. and Grits: mounting screw from flap wheel and mount radial A-5750 5pc. Assortment with 1 of each disc listed below. bristle discs as shown above in Step 1. Important note: Always ensure that the Hub extends 1/32″ or 1 A-5752 60 grit A-5754 220 grit A-5758 800 grit mm from the bottom of the accessory into the inner A-5753 120 grit A-5756 400 grit wheel arbor (A-69213) to prevent excessive run-out. A-69212 5mm A-69212L 8mm Short Hub with Long Hub with 8mm screw 14mm screw Tough blending, smoothing and finishing on metals, plastics & composites Add Ons 2″ Abrasive Pads with Screw-Lok backing Max. Speed 10,000 RPM Long lasting, aggressive discs for tough blending and finishing applications. Ideal for deburring, oxide and fire scale removal, cleaning, blending, and smooth- ing. Layered, durable unitized or USE WITH non-woven disc construction with A-69225 Screw-Lock backing for secure and Screw-Lok easy attachment to Screw-Lok Disc Disc Mandrel Mandel (A-69225).

Sanding and Finishing wood, metals, A-3512 A-3514 A-3522 A-3524 A-3526 A-3527 fiberglass, diestone, plastics, and other materials 2″ Screw-Lok Abrasive Pads Ceramic Purple Sanding Discs Max. Speed 10,000 RPM 6pc. Assortment AK3500 includes 1 of each listed below. USE WITH USE WITH Part No. Thick″ Color Grit Type A-3512 9/16 black ultra rough unitized A-3514 19/32 purple rough unitized A-3522 5/32 brown 80 non-woven A-10041 PSA Velcro® Disc A-69222 Disc Mandrel or velcro sanding heads A-3524 5/32 red 120 non-woven 2″ Ceramic Purple Sanding Discs A-3526 5/32 green 240 non-woven with (PSA) Pressure Sensitive Adhesive Backing A-3527 5/32 blue 320 non-woven Max. Speed 10,000 RPM Ceramic Purple Abrasives are excellent for sanding and finishing wood, metals, fiberglass, diestone, plastics, and other materials. 3M patented CubitronTM ceramic aluminum oxide mineral sharpens itself with use. Once initial grinding wears the grain Polishing and Lapping flat, it fractures along micro cracks creating new cutting edges. This metals, plastics & wood process repeats itself throughout the entire grinding process. Ceramic Purple Abrasives last 2 to 4 times longer than traditional aluminum 2 ″ Screw-Lok Felt Wheel 5/16″ thick oxide discs depending on grit and offer faster stock removal with Max. Speed 10,000 RPM less heat and loading. A-3402 Made from medium hard, top quality wool felt, Screw-Lok Backed AK5680 4pc. Assortment includes 1 of each grit listed below. felt wheels are used for polishing and lapping Felt Wheel USE on metals, plastics wood and other materials. Part No. Grit Part No. Grit WITH The softer edge provides a flexible surface for A-5682 60 A-5684 120 contours. It is used with polishing compounds A-5683 80 A-5685 220 such as those listed at right.

Visit www.foredom.net Aluminum Oxide Sanding Discs A-69225 to view videos on USE WITH USE WITH Screw-Lok Disc these products. Mandrel Aggressive Shaping and Sanding hard and soft woods, acrylic, diestone, plaster, A-10041 PSA Velcro® Disc A-69222 Disc Mandrel or hard rubber and fiberglass velcro sanding heads 2″ Typhoon Tungsten Carbide Discs 2″ Aluminum Oxide Sanding Discs with (PSA) Pressure Sensitive Adhesive Backing Max. Speed 10,000 RPM Aluminum oxide sanding discs are made of high-grade mineral and a bonding system which reduces shelling of the mineral. These economical abrasives are excellent for fast clean-up and pre-polishing work. A-KB25626 A-KB25627 A-KB25628 A-KB25629 AK5630 8pc. Assortment includes 2 of each grit listed below. Flat Face Coarse Flat Face Fine Round Face Coarse Round Face Fine 10-Packs Grit 10-Packs Grit Red Blue Red Blue A-5632-10 60 A-5634-10 120 3/8″ Diameter Arbor Hole 2 Typhoon Discs A-5633-10 80 A-5635-10 220 ″ Max. Speed 10,000 RPM Typhoons have unique structurally aligned tungsten carbide points that last long and do not load quickly. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Typhoons are ideal for use on hard and soft woods, acrylic, die stone, plaster, hard rubber and fiberglass. USE WITH

A-HB58 Brass Brush A-69212 5mm For easily cleaning Typhoon Discs. Short Hub with 8mm screw It removes dust or chips from between rows of carbide points. Caution – Do not use a file card or steel brush to clean Typhoons. Grinding, Deburring, Smoothing and Cleaning A-69224 Right Angle Adapter mounts on the metals, stone, diestone, plastics, and other materials Angle Grinder Attachment for Foredom’s H.30®, H.30H, fiberglass, diestone, plastics, and other materials or H.30SJ to convert it into a right angle handpiece 4″ depth • Fits into tight spaces and adds 2″ Abrasive Wheels with 3/8″ Diameter Arbor Hole more versatility to Foredom’s Angle Grinder Attachment • Comes with 2 for 3/32″ and 1/8″ shank accessories • Requires a Foredom H.30®, H.30H, or H.30SJ handpiece and flex shaft machine • Can also use 1/16″ A-10054 A-10062 A-10063 A-10068 A-10064 A-10065 and 3mm collets cup wheel taper cup wheel Contact your ® 2″ Abrasive Wheels USE WITH favorite Foredom with 3/8″ Diameter Arbor Hole dealer for more Max. Speed should not exceed 15,000 RPM Aluminum Oxide wheels are used on high tensile, information. tough materials including stone, porcelain, glass, steel For video instructions go to: www.foredom.net and other hard metals. They hold their geometry well. A-10054 Aluminum Oxide 120 grit Cup Wheel –

Add Ons for medium to fine finishing. A-69212L A-10062 Aluminum Oxide 120 grit Tapered Wheel – 8mm Long Hub for medium to fine finishing. Use on edge, NOT flat side. with 14mm A-10063 Aluminum Oxide 400 grit –for extremely screw fine cutting. Use on edge, NOT flat side. A-10068 Silicon Carbide 100 grit –for grinding, rough finishing, deburring, smoothing, and cleaning low-tensile, brittle or “smeary” type materials such as aluminum, brass, stainless steel, glass, stone, and non-metals. Use on edge, NOT flat side. AK6901 A-10064 and A-10065 - 1/2″ thick cup working face CeramCut Blue Kit 20pc. 120 grit – for faster material removal, cooler running with a unique ceramic and aluminum oxide abrasive grain structure that lasts 3 to Flexible Diamond Disc A-5752, 2-ea. of Cerium Oxide Trizact 5 times longer than standard abrasives. Can be used on hardened Polishing Discs A-4408, 1-ea. Diamond Microfinishing Discs: A-4452, and mild steel, steel alloys, chrome cobalt, titanium, platinum, other A-4453, A-4454, A-4455, A-4456, A-4457, A-4583, and 10-ea. PSA ferrous metals and wood. Non-impregnating and non-contaminating. Velcro Loop Discs A-10041. Max. Speed 10,000 RPM Use A-10064 only on edge, NOT flat side. Use A-10065 on 1/2″ edge or 5/8″ flat side.

Blending and Smoothing metals and composites 3/8″ Diameter Arbor Hole A-10055 2″ Unitized Wheel A-1055 Unitized Wheel Max. Speed 30,000 RPM Only use dry. 1/4″ thick Made of non-woven fiber coated in alumi- num oxide. Ideal for deburring, oxide and USE fire scale removal, cleaning, blending, and WITH smoothing. Use on edge, NOT flat side. Polishing and Lapping metals, plastics and wood AK6903 Wood Carving Kit 46pc. A-69212L 8mm Long Hub 5-ea. assorted grits Aluminum Oxide Sanding Discs: A-5632, A-5633, 3/8 Diameter Arbor Hole with 14mm screw ″ A-5634, A-5635, Typhoon® Tungsten Carbide Disc A-KB25628, Ceram- 2″ Felt Wheels USE Cut Blue Wheel A-10064, ScotchBrite™ Radial Bristle Disc 6-Pack - 80 WITH Max. Speed 20,000 RPM grit A-4542-6, 25-pcs. PSA Velcro Loop Discs A-10041, Velcro Foam Made from hard density, tightly com- Sanding Heads A-10047 & A-10048, Screw-Lok Disc with Velcro Hook pressed, top quality wool felt, felt wheels Surface A-37005, and AK3600 16-pc. Assortment of Screw-Lok Sand- are used for polishing and lapping on paper Discs with holes. Maximum Speeds for each are listed in metals, plastics wood and other materials. accessory descriptions. They hold an edge for working in angles and corners and are used with polishing compounds such as those listed below. ARFWAGSE Square Edge 3/4″ thick

A-KE6 Knife Edge for polishing grooves Polishing Compounds AK6905 Foredom offers a complete selection of polishing Metal Working Kit 38pc. compounds. Three of the most popular are: 5-ea. Imperial Microfinishing Discs: A-4591, A-4592, A-4593, A-4594, Tripoli (Brown) for general cutting down and scratch removal on A-4596, A-4598, 2 ea. Cut-Off Wheels A-D11, Platinum White Polishing non-ferrous metals. (A-4002 -4.5 oz. bar) Compound 1-oz. tube A-40061, Square Edge Felt Buff ARFWAGSE, Platinum White is for final polishing. Produces a deep luster on met- Silicon Carbide Wheel A-10068, Aluminum Oxide Wheel A-10063, als and plastic. (A-4006 -5.75 oz. bar) 15-ea. PSA Velcro Loop Discs A-10041, Screw-Lok Abrasives: A-3512, Carnauba is the hardest natural wax available. It is good for A-3524, A-3526, A-3527and Screw-Lok Felt Wheel A-3402. producing a high luster on wood. (A-4008 -2 oz. bar) Maximum Speeds for each are listed in accessory descriptions.