DOCSLIB.ORG

Cut, Saw & Metal Removal

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cut, Saw & Metal Removal CUT, SAW & E. METAL REMOVAL E.1. Drill Bits & Bushings E.4. Indexable & Carbide Cutting Tools E.1.1. Metal Drill Bits E.4.1. Inserts E.1.2. Metal Drill Indexes & Sets E.4.2. Holders & Tooling E.1.3. Masonry Drills E.4.3. Accessories E.1.4. Step Drills E.4.4. Kits E.1.5. Wood Drilling Bits E.4.5. Brazed E.1.6. Bushings E.4.6. Boaring E.1.7. Drill Stops E.4.7. Carbide Cutters E.1.8. Glass & Ceramic Drills E.5. Holesaws, Sets, & Accessories E.2. Taps, Dies, & Sets E.5.1. Holesaws E.2.1. Taps E.5.2. Pilots & Arbors E.2.2. Dies E.5.3. Sets & Accessories E.2.3. Sets E.6. Saw Blades E.2.4. Accessories E.6.1. Reciprocating Saw Blades E.3. Endmills, Countersinks & Reamers E.6.2. Jig Saw Blades E.3.1. Endmills E.6.3. Bandsaw Blades E.3.2. Countersinks E.6.4. Circular Saw Blades E.3.3. Reamers E.6.5. Hacksaw Blades E.7. Routing 800-634-6313 423-461-4700 www.summersindustrial.com E.1. E.1.1. DRILL STYLE 150, GENERAL PURPOSE, JOBBER LENGTH, BLACK OXIDE, HSS, 118 SPLIT POINT Part# MFG# Size, Fraction OAL Flute Length 10007417 44003 3/64" 1.75 0.75 10004012 44004 1/16" 1.875 0.875 10004013 44005 5/64" 2 1 10004015 44006 3/32" 2.25 1.25 E. 10004011 44007 7/64" 2.625 1.5 10004083 44008 1/8" 2.75 1.625 10004016 44009 9/64" 2.875 1.75 10004017 44010 5/32" 3.125 2 10004084 44011 11/64" 3.25 2.125 10004032 44012 3/16" 3.5 2.3125 10004010 44013 13/64" 3.625 2.4375 10004085 44014 7/32" 3.75 2.5 10004018 44015 15/64" 3.875 2.625 10004020 44016 1/4" 4 2.75 10004019 44017 17/64" 4.125 2.875 10004031 44018 9/32" 4.25 2.9375 10004030 44019 19/64" 4.375 3.0625 10004033 44020 5/16" 4.5 3.1875 10004029 44021 21/64" 4.625 3.3125 10004028 44022 11/32" 4.75 3.4375 10004027 44023 23/64" 4.875 3.5 10004026 44024 3/8" 5 3.625 10004086 44025 25/64" 5.125 3.75 10004087 44026 13/32" 5.25 3.875 10004025 44027 27/64" 5.375 3.9375 10004023 44028 7/16" 5.5 4.0625 10004088 44029 29/64" 5.625 4.1875 10004089 44030 15/32" 5.75 4.3125 10004022 44031 31/64" 5.875 4.375 10004021 44032 1/2" 6 4.5 DRILL STYLE 150, GENERAL PURPOSE, JOBBER LENGTH, BLACK OXIDE, HSS, 118 SPLIT POINT Part# MFG# Size, Wire OAL Flute Length 10007464 44071 1 3.875 2.625 10007973 44072 2 3.875 2.625 10007465 44073 3 3.75 2.5 10007974 44074 4 3.75 2.5 10007466 44075 5 3.75 2.5 10007467 44076 6 3.75 2.5 CUT, SAW & METAL REMOVAL & METAL SAW CUT, 10007468 44077 7 3.625 2.4375 10007469 44078 8 3.625 2.4375 10007470 44079 9 3.625 2.4375 10007471 44080 10 3.625 2.4375 10007484 44081 11 3.5 2.3125 10007486 44082 12 3.5 2.3125 10007487 44083 13 3.5 2.3125 10007488 44084 14 3.375 2.1875 Continued next page E.1.1.1E.1. www.summersindustrial.com 800-634-6313 423-461-4700 DRILL STYLE 150, GENERAL PURPOSE, JOBBER LENGTH, BLACK OXIDE, HSS, 118 SPLIT POINT Continued from previous page 10007489 44085 15 3.375 2.1875 10007490 44086 16 3.375 2.1875 10007492 44087 17 3.375 2.1875 10007493 44088 18 3.25 2.125 10007495 44089 19 3.25 2.125 10007497 44090 20 3.25 2.125 10007499 44091 21 3.25 2.125 10007500 44092 22 3.125 2 10007976 44093 23 3.125 2 E. 10007502 44094 24 3.125 2 10007503 44095 25 3 1.875 10007504 44096 26 3 1.875 10007505 44097 27 3 1.875 10007506 44098 28 2.875 1.75 10007508 44099 29 2.875 1.75 10007410 44100 30 2.75 1.625 10007509 44101 31 2.75 1.625 10007510 44102 32 2.75 1.625 10007512 44103 33 2.625 1.5 10007514 44104 34 2.625 1.5 10007516 44105 35 2.625 1.5 10007517 44106 36 2.5 1.4375 10007519 44107 37 2.5 1.4375 10007521 44108 38 2.5 1.4375 10007524 44109 39 2.375 1.375 10007526 44110 40 2.375 1.375 10007527 44111 41 2.375 1.375 10007528 44112 42 2.25 1.25 10007529 44113 43 2.25 1.25 10007531 44114 44 2.125 1.125 10007533 44115 45 2.125 1.125 10007534 44116 46 2.125 1.125 10007357 44117 47 2 1 10007535 44118 48 2 1 10007537 44119 49 2 1 10007541 44120 50 2 1 10007544 44121 51 2 1 10007545 44122 52 1.875 0.875 10007547 44123 53 1.875 0.875 10007549 44124 54 1.875 0.875 10007551 44125 55 1.875 0.875 10007552 44126 56 1.75 0.75 10007580 44127 57 1.75 0.75 10007579 44128 58 1.625 0.6875 10007595 44129 59 1.625 0.6875 10007596 44130 60 1.625 0.6875 REMOVAL & METAL SAW CUT, 800-634-6313 423-461-4700 www.summersindustrial.com E.1.1.2E.1. DRILL STYLE 150, GENERAL PURPOSE, JOBBER LENGTH, BLACK OXIDE, HSS, 118 SPLIT POINT Part# MFG# Size, Letter OAL Flute Length 10007439 44171 A 3.875 2.625 10007440 44172 B 4 2.75 10007441 44173 C 4 2.75 10007442 44174 D 4 2.75 10004020 44016 E 4 2.75 10007443 44176BP F 4.125 2.875 10007445 44177 G 4.125 2.875 10007446 44178 H 4.125 2.875 E. 10007447 44179 I 4.125 2.875 10007448 44180 J 4.125 2.875 10007449 44181 K 4.25 2.9375 10007450 44182 L 4.25 2.9375 10007451 44183 M 4.375 3.0625 10007452 44184 N 4.375 3.0625 10007453 44185 O 4.5 3.1875 10007454 44186 P 4.625 3.3125 10007408 44187 Q 4.75 3.4375 10007455 44188 R 4.75 3.4375 10007456 44189 S 4.875 3.5 10007457 44190 T 4.875 3.5 10007458 44191 U 5 3.625 10007459 44192 V 5 3.625 10007460 44193 W 5.125 3.75 10007461 44194 X 5.125 3.75 10007462 44195 Y 5.25 3.875 10007463 44196 Z 5.25 3.875 DRILL STYLE 150D, GENERAL PURPOSE, JOBBER LENGTH, BRIGHT, HSS, 118 SPLIT POINT Part# MFG# Size OAL Flute Length 10007348 44208 1/8" 2.75 1.625 10007418 44211 11/64" 3.25 2.125 10007472 44280 10 3.625 2.4375 10007416 44214 7/32" 3.75 2.5 10007444 44376 F 4.125 2.4803 DRILL STYLE 150ASP NAS, HEAVY DUTY, JOBBER LENGTH, BLACK OXIDE, HSS, 135 SPLIT POINT Part# MFG# Size OAL Flute Length 10004765 44601 1/64" 0.75 0.1875 10004766 44602 1/32" 1.375 0.5 10004767 44603 3/64" 1.75 0.75 45604 CUT, SAW & METAL REMOVAL & METAL SAW CUT, 10004778 1/16" 1.875 0.875 10004779 45605 5/64" 2 1 10004780 45606 3/32" 2.25 1.25 10004781 45607 7/64" 2.625 1.5 10004782 45608 1/8" 2.75 1.625 10004783 45609 9/64" 2.875 1.75 10004784 45610 5/32" 3.125 2 Continued next page E.1.1.3E.1. www.summersindustrial.com 800-634-6313 423-461-4700 DRILL STYLE 150ASP NAS, HEAVY DUTY, JOBBER LENGTH, BLACK OXIDE, HSS, 135 SPLIT POINT Continued from previous page 10004785 45611 11/64" 3.25 2.125 10004786 45612 3/16" 3.5 2.3125 10007588 45680BP 10 3.625 2.4375 10004787 45613 13/64" 3.625 2.4375 10004788 45614 7/32" 3.75 2.5 10004789 45615 15/64" 3.875 2.625 10004790 45616 1/4" 4 2.75 10007589 45776BP F 4.125 2.875 10004791 45617 17/64" 4.125 2.875 E. 10004792 45618 9/32" 4.25 2.9375 10004793 45619 19/64" 4.375 3.0625 10004794 45620 5/16" 4.5 3.1875 10004795 45621 21/64" 4.625 3.3125 10004796 45622 11/32" 4.75 3.4375 10004797 45623 23/64" 4.875 3.5 10004799 45625 25/64" 5.125 3.75 10004800 45626 13/32" 5.25 3.875 10004801 45627 27/64" 5.375 3.9375 10004802 45628 7/16" 5.5 4.0625 10004803 45629 29/64" 5.625 4.1875 10004804 45630 15/32" 5.75 4.3125 10004805 45631 31/64" 5.875 4.375 10004806 45632 1/2" 6 4.5 DRILL STYLE 550 NAS, COBALT HEAVY DUTY, JOBBER LENGTH, STRAW, HSS, 135 SPLIT POINT Part# MFG# Size OAL Flute Length 10012349 46604 1/16" 1.875 0.875 10012350 46605 5/64" 2 1 10012351 46606 3/32" 2.25 1.25 10012352 46607 7/64" 2.625 1.5 10012353 46608 1/8" 2.75 1.625 10012354 46609 9/64" 2.875 1.75 10012355 46610 5/32" 3.125 2 10007483 46611BP 11/64" 3.25 2.125 10012356 46612 3/16" 3.5 2.3125 10007477 46680BP 10 3.625 2.4375 10007587 46677 7 3.625 2.4375 10007482 46614BP 7/32" 3.75 2.5 10012357 46615 15/64" 3.875 2.625 10007585 46616 1/4" 4 2.75 10007478 46776BP F 4.125 2.875 10007592 46617 17/64" 4.125 2.875 REMOVAL & METAL SAW CUT, 10007593 46619 19/64" 4.375 3.0625 10007481 46620 5/16" 4.5 3.1875 10007590 46621 21/64" 4.625 3.3125 10007480 46624BP 3/8" 5 3.625 10007586 46628 7/16" 5.5 4.0625 10007479 46632BP 1/2" 6 4.5 800-634-6313 423-461-4700 www.summersindustrial.com E.1.1.4E.1.
Load more

Recommended publications
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles
    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
    [Show full text]
  • IBS, INCORPORATED T a P S B U R S B L a D E S Index
    IBS, INCORPORATED Index 4-40 thru 1/2-10 Tap, Die & Drill Set PT-8 Taps, Burs & Blades 9/16-12 thru 3/4-16 Tap, Die & Drill Set PT-8 A Index 10 Pc NC/NF Power Taps w/Index PT-5, PT-7 10 Pc NC/NF Taper Taps w/Inde PT-5, PT-7 Annular Cutters 18 Pc NC Bottom Taps & Drill Bits w/Index PT-5, PT-7 Carbide Tipped 18 Pc NC Taper Taps & Drill Bits w/Index PT-5, PT-7 CT150 & CT200 PT-14, PT-16 Nitro-Carb Hand Tap PT-5, PT-7 IBS High Speed Steel PT-16 Assortments, Cutting Tools B Advanced Edge Power Reciprocating Saw Blades T Blades with Tool Ease Lubricant Stick PT-45 100 PK Shark Serrated Blades PT-54 Annular Cutters - Carbide Tipped Bandsaw, Bi-Metal A PT-15 General Information PT-36 Annular Cutters - High Speed Steel PT-17 Portable Blades PT-41 P Black Hole Carbide Tipped Cutters Troubleshooting PT-37, PT-38, PT-39, PT-40 1" Depth - 4 Pc.Set PT-23 Bi-Metal 1" Depth - 5 Pcs PT-23 Air Saw Blades PT-51 S 3/16" Depth - 5 Pc. PT-23 Reciprocating Saw PT-46 762R - 5 Pc. - 3/16" Depth PT-22 Boar Blades PT-48 763R - 4 Pc. 1" Depth PT-22 Thick Demolition PT-47 764R - 5 Pc. - 1" Depth PT-23 Sabre/Jig PT-52 Carbide Burs PT-59 Chop Saw-Carbide Tipped B Hole Saws 14" Blade for Aluminum PT-34 Bi-Metal 14" Blade for Stainless Steel PT-34 U Advanced Bi-Metal Hole Saws 2-1/8"- 4" PT-27 14" Blade for Steel PT-34 Advanced Bi-Metal Hole Saws 3/4"- 4" PT-28 Circular Saw Advanced Bi-Metal Hole Saws 5/8"- 2" PT-29 Combination Blade PT-32 R M42 Thin Wall Hole Saws Travel Tray Assortment PT-18 Heavy Duty Deck / Nail Cutting Blade PT-32 Hole Saws - Bi-Metal Miter Saw
    [Show full text]
  • Instruction Manual
    INSTRUCTION MANUAL 20V Cordless Drill Model # PS76405 Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com. www.powersmartusa.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: [email protected] 2 CONTENTS Technical data…...……………………………………………………... 3 Introduction…….………………………………………………............ 4 Safety information…….………………………………………………... 4 General safety rules…….………………………………………………. 5 Special safety rules for cordless drill.…………………………………. 7 Symbols………………………………………………………………… 8 Knowing your cordless drill...………….….……………………….…… 9 Assembly instruction…………………………………………….………. 10 Operating instruction…………………………………………………....... 12 Maintenance……………………………………………………...………. 16 Trouble shooting…………………………………………………….…… 16 Exploded view…………………………………………………………… 17 Parts list…………………………………………………………………... 18 Warranty…………………………………………………………………. 19 TECHNICAL DATA Cordless Drill Model # PS76405 Rated Voltage 20V No-load Speed： 0~400 rpm / 0 ~1600 rpm Torque force: 45N.m Torque Setting Range: 1~21 Drill Capacity: Steel (13mm) Wood (38mm) Battery type: 20V Lithium-ion, 1.5 Ah Battery model: PS76018B Charge time: 1 hour Charger model: PS76018C Weight: 4.32lb. 3 INTRODUCTION Thank You for Purchasing a PowerSmart® Product. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this manual. PowerSmart® reserves the right to change this product and specifications at any time without prior notice. Please keep this manual available to all users during the entire life of the power tool. This manual contains special messages to bring attention to potential safety concerns, power tool damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage. QUESTIONS? PROBLEMS? Please contact our Customer Service Dept. with any questions and/or comments, either by Email: [email protected], or Toll Free at (800)791-9458.
    [Show full text]
  • HAND TOOLS Hacksaws | Snips | Tubing Cutters | Pipe Wrenches | Screwdrivers | Utility Knives | Tool Bags
    HAND TOOLS Hacksaws | Snips | Tubing Cutters | Pipe Wrenches | Screwdrivers | Utility Knives | Tool Bags We go the EXTRA-MILE to bring new thinking to familiar tools. So they make it quicker and easier to get the job done right. We pioneered bi-metal hacksaw blades, and made them virtually UNBREAKABLE. We gave our snips pencil- ground tips to cut into tight spots, plus fused-over-molds that can’t slip off their double-tang steel handles. And we added a fourth roller to our extra-rugged, ergonomically designed tubing cutters, so they won’t walk while cutting—in addition to a built-in reamer to smooth tubing ends. When you get your hands on these and other LENOX hand tools, you won’t let go. 88 Customer Service 800-628-8810 T2™ Hacksaw Blades .....................................................90 Hacksaw Frames .....................................................91, 92 Hand Saws ....................................................................93 Snips & HVAC Tools ......................................................95 Plastic Tubing Cutters .............................................96, 97 Tubing Cutters ........................................................ 98, 99 Pipe Wrenches ...........................................................100 All-In-One Screwdrivers & Hollow Shaft Nut Drivers . 101 Locking Tradesman Utility Knife & Utility Knives ........102 Utility Blades, Safety Knife & Blades ..........................103 Soft Storage Tool Bags ................................................104 lenoxtools.comllenoxttoolls.com
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • 9 " Dovetail Saw
    Instructions Your kit contains: fig. 1 • Two brass Saw-Bolts Saw-Bolts • Two brass Saw-Nuts 9 " Dovetail Lock-washers • Two phosphor bronze Lock-Washers saw KIT • A 9 " Blade, drilled and pitched at 18tpi (19ppi) • A brass Saw-Back folded and chamfered Handle • A paper handle template (page six ) • These instructions: please read all the Saw-back way through before you start making your saw. All the instructions for Saw-Nuts building this kit apply to the handle Thank you for purchasing design that is on the included template. our dovetail saw kit. Blade We hope you will find working from this kit to be a rewarding experience. When complete, we feel you will have a fine tool that Wood Selection will find a favored place in You will need a piece of wood for the handle approximately 6-1/8 " x 5-1/8. " The piece should be a little your toolbox, and provide thicker than 7/8 " so that you have enough extra thickness for sanding and finishing. Orient the wood a lifetime of service. so that the grain runs through the thinner parts of the handle. (fig. )2 The handle template has a If you have any questions line indicating which direction the grain of the wood should be oriented. Proper grain orientation is about the instructions, important, and gives the handle the strength it needs. please email or call us. A wide variety of wood species will yield a functional and beautiful saw handle. Almost any stable wood can work well. Traditional materials are quarter-sawn Beech and Apple wood.
    [Show full text]
  • 4452 Safe & Efficient Operation of Hand Held Cutoff Saws Review Quiz
    4452 Safe & Efficient Operation Of Hand Held Cutoff Saws Review Quiz Safe & Efficient Operation of Hand Held Cutoff Saws Review Quiz Safe & Efficient Operation of Hand Held Cutoff Saws Review Quiz Name Date 1. Most power saw accidents are the result of operator negligence. a. True b. False 2. What Personnel Protective Equipment is required when using a hand held cutoff saw? a. Eye Protection b. Heavy Gloves c. Steel Towed Work Boots d. Ear Protection e. Hardhat f. All of the above. 3. If you are careful it is OK to operate a saw without a safety guard in place? a. True b. False 4. Which of the following blade types should never be used on a cutoff saw? a. Abrasive b. Diamond c. Carbide Chip d. Carbide Tipped 5. If you are cutting a concrete surface what type of blade would you use? a. Diamond b. Carbide Chip c. Abrasive d. A & C 6. Diamond blades can cut any material. a. True b. False 7. A “Big Window” blade is designed to cut a wide variety of materials of varying hardness. a. True b. False Safe & Efficient Operation of Hand Held Cutoff Saws Review Quiz 8. If you were going to cut up sheet metal, tin, counter tops & timber, what type of blade would you use? a. Diamond b. Carbide Chip c. Abrasive 9. Before operating a saw it is important to check the blade for: a. Is it approved for hand held saws? b. Has no cracks c. Its max speed is less than or equal to the saws blade speed d.
    [Show full text]
  • Hydraulic Hand Saw Hand Saw
    HYDRAULIC HAND SAW OPERATOR’S MANUAL www.WolverineEquipment.com 10/20/2015 1 TABLE OF CONTENTS Description Page # Safety…………....……………………………………………….……….…..... 3 Personal Safety……………………………………………………….……... 3 Blade Safety………………………………………………….…..…….……… 3 General Saw Safety………………………………………….…..….……… 4 Cutting/Work Area Safety……………………………….………………. 4 Hydraulic Hand Saw Setup Instructions………………..……….. 5 Hydraulic Line Connections……………………………………….……. 5 Mounting a Standard Blade………………………………………....... 5 Setup…………………………………………………………………….………… 5 Operating the Saw……………………………………………………….…. 6 Standard Cutting………………………………………….………….……... 6 Correcting a Wandering Cut………………………………….………… 6 Maintenance…………………………………….………………..……..…… 7 Before Each Use……………………………………………………………… 7 After Each Use………………………………………………………..…..….. 7 Annually…………………………………………………………..………....…. 7 Miscellaneous…………………………………………………………………. 7 How to Remove the Blade Collar Assembly……………..……… 8 Hydraulic Motor Shaft Seal Replacement Procedure…….... 9 Troubleshooting……………………………………………….….……..….. 10 Handsaw Parts Diagram Upcut Standard……………………………………………….................. 11 Downcut Standard……………………………………………………….…. 12 Upcut Combo………………………………………..…………………........ 13 Downcut Combo…………………………………………………………..... 14 Upcut Compact Combo……………………………………………..……. 15 Downcut Compact Combo …………………………………………..... 16 Upcut Compact………………………………………………………………. 17 Downcut Compact………………………………………………………….. 18 Warranty Info……………………………………………………………….… 19 10/20/2015 2 SAFETY Your hydraulic hand saw has been designed to be as safe and efficient
    [Show full text]
  • Hand Saw Restoration
    NUMBER 175 MARCH 2014 A Journal of Tool Collecting published by CRAFTS of New Jersey Hand Saw Restoration A Presentation by Bob Garay The November CRAFTS Written by Dave Nowicki dle doesn’t make the saw perfect, it can meeting featured a presentation on and does make the saw more comforta- saw restoration by CRAFTS Presi- ble to use. It’s the steel used in these dent Bob Garay. Following is most of the key elements in saws that makes them special. It was highly tempered, the presentation that collectors and woodworkers can use enabling it to hold an edge for a very long time before in the selection and restoration of quality hand saws. resharpening is required. Regardless of any other en- The first rule of thumb is to start with a good hancements it’s the steel that makes a saw. What’s a good saw? In this case we’re talking saw good. With regard to other enhance- about good usable saws. Many times just knowing the ments, just about any saw with a rose- maker of the saw will tell you whether you have a good wood handle is a good indicator of a high saw. According to Bob, when he sees a Disston, a Si- quality saw, where premium materials monds or an Atkins saw he knows it’s a good saw. were used to enhance the product. For When it comes to value, Disston‘s are the ones to look example the Atkins #400 and #401 saws for. They were all made to a consistent high quality had rosewood handles.
    [Show full text]
  • To Download the Cutting Edge
    Arc The Cutting Edge/Fall 2020 is a supplement to the Metal Center News November 2020 issue. Volume 17 ◾ Number 1 3 Retrofit to New Capabilities – 12 Good Enough for the Rails – KASTO AME - Advanced Machine & Engineering 4 Reducing Long Part Indexing 14 Size Matters, Especially in Cutting Saves Time, Money – HYDMECH – Flow International 6 Tracking Blade Life Crucial to 16 Don’t Let Your Cutting Get Sawing Operation – Pat Mooney Saws Bogged Down – Steel Storage Systems 8 Sawing Challenges Vary by 18 Five Reasons why Table Slats Material Type – HE&M Saw are Important – Hypertherm 10 Cost Saving Initiatives Deliver 20 Laser vs. Waterjet: Measurable Gains – L.S. Starrett Co. Tale of the Tape – Leverwood NEED AD Index MATERIAL HANDLING? 13 Advanced Machine 3 KASTO Increase your productivity for plate cutting & Engineering Co. 724-544-0430 815-962-6076 www.kasto.com/us with flexibility and efficiency. www.ame.com 11 The L.S. Starrett Co. C4 American Specialty 978-249-3551 Metals www.starrett.com 800-359-5959 americanspecialtymetals.com C2 Messer Cutting Scan to watch Systems video 20 Behringer Saws 262-255-5520 610-286-9777 www.messer-cutting.com www.behringersaws.com 7 Pat Mooney Saws C3 Cosen Saws 800-323-7503 704-943-1040 www.patmooneysaws.com www.cosensaws.com 19 Randolph Tool 15 Flow International 330-877-4923 Messer offers the high speed 800-446-3569 www.randolphtoolco.com www.flowwaterjet.com MetalMaster Xcel cutting machine with 21 Schelling America 9 HE&M Saw 919-544-0430 material handling. Coupled with Messer 918-825-4821 www.imaschelling.us shuttle systems provides the greatest, www.hemsaw.com 17 Steel Storage Systems lexibility and is the most efficient way to 5 HYDMECH 800-442-0291 load plate and unload cut parts.
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • Shop Supplies
    Shop Supplies www.neiafasteners.com www.nfc-usa.com E-Mail: [email protected] E-Mail: [email protected] 1-800-782-6342 1-800-786-4658 8530 “K” Street 1817 Jasper Street Omaha, NE 68127 Kansas City, MO 64116 Phone: (402) 592-4988 Phone: (816) 221-8885 Fax: (402) 592-9271 Fax: (816) 472-5555 905 East Kansas Ave. 2335 B-104 E. Chestnut Expwy. Arkansas City, KS 67005 Springfield, MO 65802 Phone: (620) 442-7526 Phone: (417) 865-6246 Fax: (620) 442-7583 Fax: (417) 865-0596 Table of Contents Categorized Listing SHOP SUPPLIES 1 ABRASIVES 60 DRILL BITS 1 Bristle Discs 68 1/2” Shank S&D Series 10 Chop Saw Wheels 62 1/2” Shank S&D Nitro Series 10 Clean & Strip Discs 66 3/8” Shank Nitro Series 11 Cut Off Wheels & Mandrel 60 Aircraft Extension Series 13 Emery Cloth 65 BG135 Series 2 Fibre Discs 66 Brute Series 4 Flap Discs 63 Cobalt Series 5 Flap Discs- Mini 63 Countersinks 15 Flap Wheels 64 Cryo 135 Series 1 Grinding Wheels 60 Double End Series 12 Hand Pads 68 Empty Indexes 23 Roloc Abrasive Discs 66 Jobber Length Series 6 Silicon Carbide Sandscreen 64 Left Hand Series 9 Steel Wool 69 Letter Size Series 7 Surface Cond. Discs & Holders- 3M 67 Magnum Series 3 Surface Cond. Discs & Holders 68 Masonry Carbide Tip Series 13 AUTO ACCESSORIES 72 Metric Jobber Brute Series 12 Application Squeegee 72 Reamer Brute Series 15 Floor Mats 72 Screw Machine Length Series 12 Seat Covers 72 Spade Bits 13 BALL JOINTS 44 Vari-Bits/Ultra-Bits 14 Ball Joint Assembly 44 Wire Gauge Series 8 Male & Female Ball Joints 45 EYE BOLTS 38 Male & Female Ball Joints w/ Stud
    [Show full text]