Assign Macro Or Function to Keys on Your Keyboard
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Freestyle-Pro-Manual.Pdf
User Manual KB900 Mac/Windows/PC SmartSet™ Cherry Low-Force Switchable Programming Engine Mechanical Keyswitches 1 Kinesis Corporation 22030 20th Avenue SE, Suite 102 Bothell, Washington 98021 USA Keyboard models covered by this manual: [email protected], [email protected] KB900-brn www.kinesis.com April 20, 2018 Edition This manual covers features included through firmware version 1.0.0. To download the latest firmware and to access all support resources visit www.kinesis.com/support. To shop for accessories visit https://www.kinesis-ergo.com/products/: Palm Supports (AC903)- Detachable Palm Supports. VIP3 Pro (AC920)- Adjustable tenting accessory and Palm Supports (5°/10°/15°). Palm Supports required for tenting. V3 Pro (AC930)- Adjustable tenting accessory (5°/10°/15°) for use without Palm Supports. Palm Pads (AC700blk)- Cushioned palm pads for use with Palm Supports. © 2018 by Kinesis Corporation, all rights reserved. Kinesis and Freestyle are registered trademarks of Kinesis Corporation. Freestyle Pro, SmartSet, and v-Drive are trademarks of Kinesis Corporation. All other trademarks are property of their respective owners. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any commercial purpose, without the express written permission of Kinesis Corporation. FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. -
Customizing Mach2
Mach2 Customisation Guide All queries, comments and suggestions welcomed via [email protected] Mach Developers Network (MachDN) is currently hosted at: http://groups.yahoo.com/group/mach1mach2cnc/files/ © 2003/4 Art Fenerty and John Prentice Front cover: Brown & Sharpe Universal mill 1862 (with some "artistic" liberties) Back cover (if present): The old, gear, way of co-ordinating motion on mill table and a rotary axis For Mach2 Release 6.11 Manual Revision 6.11-A6 Contents Contents 1. Preface.............................................................................................1-1 2. Communication routes...................................................................2-1 2.1 Electrical connections.....................................................................................................2-1 2.2 Keystroke connections....................................................................................................2-1 2.2.1 Keystrokes........................................................................................................................2-1 2.2.2 Keystrokes and Shortcuts (Hotkeys)..................................................................................2-3 2.3 The KeyGrabber and profilers.......................................................................................2-3 2.4 VB Script connections.....................................................................................................2-4 2.4.1 VB Script program............................................................................................................2-4 -
10 Keyboard/Keypad Page (0X07) This Section Is the Usagepage for Key Codes to Be Used in Implementing a USB Keyboard
54 Universal Serial Bus HID Usage Tables 10 Keyboard/Keypad Page (0x07) This section is the UsagePage for key codes to be used in implementing a USB keyboard. A Boot Keyboard (84-, 101- or 104-key) should at a minimum support all associated usage codes as indicated in the “Boot” column below. The usage type of all key codes is Selectors (Sel), except for the modifier keys Keyboard Left Control (0x224) to Keyboard Right GUI (0x231) which are Dynamic Flags (DV). Note A general note on Usages and languages: Due to the variation of keyboards from language to language, it is not feasible to specify exact key mappings for every language. Where this list is not specific for a key function in a language, the closest equivalent key position should be used, so that a keyboard may be modified for a different language by simply printing different keycaps. One example is the Y key on a North American keyboard. In Germany this is typically Z. Rather than changing the keyboard firmware to put the Z Usage into that place in the descriptor list, the vendor should use the Y Usage on both the North American and German keyboards. This continues to be the existing practice in the industry, in order to minimize the number of changes to the electronics to accommodate other languages. Table 12: Keyboard/Keypad Page Ref: Typical AT-101 Usage ID Usage ID Usage Name Position PC- MacUNI Boot (Dec) (Hex) AT X 0 00 Reserved (no event indicated)9 N/A 4/101/104 1 01 Keyboard ErrorRollOver9 N/A 4/101/104 2 02 Keyboard POSTFail9 N/A 4/101/104 3 03 Keyboard ErrorUndefined9 -
Metadefender Core V4.12.2
MetaDefender Core v4.12.2 © 2018 OPSWAT, Inc. All rights reserved. OPSWAT®, MetadefenderTM and the OPSWAT logo are trademarks of OPSWAT, Inc. All other trademarks, trade names, service marks, service names, and images mentioned and/or used herein belong to their respective owners. Table of Contents About This Guide 13 Key Features of Metadefender Core 14 1. Quick Start with Metadefender Core 15 1.1. Installation 15 Operating system invariant initial steps 15 Basic setup 16 1.1.1. Configuration wizard 16 1.2. License Activation 21 1.3. Scan Files with Metadefender Core 21 2. Installing or Upgrading Metadefender Core 22 2.1. Recommended System Requirements 22 System Requirements For Server 22 Browser Requirements for the Metadefender Core Management Console 24 2.2. Installing Metadefender 25 Installation 25 Installation notes 25 2.2.1. Installing Metadefender Core using command line 26 2.2.2. Installing Metadefender Core using the Install Wizard 27 2.3. Upgrading MetaDefender Core 27 Upgrading from MetaDefender Core 3.x 27 Upgrading from MetaDefender Core 4.x 28 2.4. Metadefender Core Licensing 28 2.4.1. Activating Metadefender Licenses 28 2.4.2. Checking Your Metadefender Core License 35 2.5. Performance and Load Estimation 36 What to know before reading the results: Some factors that affect performance 36 How test results are calculated 37 Test Reports 37 Performance Report - Multi-Scanning On Linux 37 Performance Report - Multi-Scanning On Windows 41 2.6. Special installation options 46 Use RAMDISK for the tempdirectory 46 3. Configuring Metadefender Core 50 3.1. Management Console 50 3.2. -
Configuration Control Document
Configuration Control Document CR8200 Firmware Version 1.12.2 CR950 Firmware Version 2.1.2 CR1500 Firmware Version 1.4.1 CR1100 Firmware Version 1.2.0 CR5200 Firmware Version 1.0.4 CR2700 Firmware Version 1.0.6 A271 Firmware Version 1.0.3 D027153 CR8200 CR950 CR1500 CR1100 CR2700 CRA-A271 Configuration Control Document CCD.Docx Page 1 of 89 © 2013-2019 The Code Corporation 12393 South Gateway Park Place Suite 600, Draper, UT 84020 (801) 495-2200 FAX (801) 495-0280 Configuration Control Document Table of Contents Keyword Table .................................................................................................................. 4 Scope ................................................................................................................................ 6 Notations .......................................................................................................................... 6 Reader Command Overview ............................................................................................. 6 4.1 Configuration Command Architecture ........................................................................................ 6 4.2 Command Format ....................................................................................................................... 7 4.3 Supported Commands ................................................................................................................. 8 4.3.1 <CF> – Configuration Manager ...................................................................................................... -
The Linux Users' Guide
The Linux Users' Guide Copyright c 1993, 1994, 1996 Larry Greenfield All you need to know to start using Linux, a free Unix clone. This manual covers the basic Unix commands, as well as the more specific Linux ones. This manual is intended for the beginning Unix user, although it may be useful for more experienced users for reference purposes. i UNIX is a trademark of X/Open MS-DOS and Microsoft Windows are trademarks of Microsoft Corporation OS/2 and Operating System/2 are trademarks of IBM X Window System is a trademark of X Consortium, Inc. Motif is a trademark of the Open Software Foundation Linux is not a trademark, and has no connection to UNIX, Unix System Labratories, or to X/Open. Please bring all unacknowledged trademarks to the attention of the author. Copyright c Larry Greenfield 427 Harrison Avenue Highland Park, NJ 08904 [email protected] Permission is granted to make and distribute verbatim copes of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections that reprint \The GNU General Public License", \The GNU Library General Public License", and other clearly marked sections held under seperate copyright are reproduced under the conditions given within them, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language under the conditions for modified versions. -
Softwindows™ 95 for UNIX User's Guide (Version 5 of Softwindows
SoftWindows™ 95 for UNIX User’s Guide (Version 5 of SoftWindows 95) Document Number 007-3113-007 CONTRIBUTORS Edited by Karin Borda and Douglas B. O’Morain Production by Carlos Miqueo © 1998, Silicon Graphics, Inc.— All Rights Reserved The contents of this document may not be copied or duplicated in any form, in whole or in part, without the prior written permission of Silicon Graphics, Inc. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure of the technical data contained in this document by the Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 52.227-7013 and/or in similar or successor clauses in the FAR, or in the DOD or NASA FAR Supplement. Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is Silicon Graphics, Inc., 2011 N. Shoreline Blvd., Mountain View, CA 94043-1389. TurboStart and SoftNode are registered trademarks of Insignia Solutions. SoftWindows is a trademark used under license. Silicon Graphics, the Silicon Graphics logo and IRIX are registered trademarks, and Indy, O2, and IRIS InSight are trademarks of Silicon Graphics, Inc. R5000 and R10000 are registered trademarks of MIPS Technologies, Inc. Apple and Macintosh are registered trademarks of Apple Computer, Inc. DEC is a trademark of Digital Equipment Corporation. WinPost is a trademark of Eastern Mountain Software. FLEXlm is a trademark of Globetrotter Software Inc. IBM is a registered trademark and IBM PC and IBM PC/AT are trademarks of International Business Machines Corp. Intel and Pentium are registered trademarks of Intel Corporation. -
GSI Local Guide
UNIX Primer GSI Local Guide GSI Computing Center Version 2.0 This is draft version !!! Preface: More than one year ago, we published our ®rst version of the Unix primer, which has been used in the meantime by many people at GSI and even in the outside HEP community. Nowadays, as more and more physicists have access to a Unix computer either via a X-terminal or use their own workstation, and as the installed computing power has increased by a large factor, we have revised the ®rst version of our Unix primer. We tried to re¯ect the changes in the installedhardware, like the installationof the 11 machine AIX cluster, and the installationof new software products, as the batch system for job submission, new backup and restore products and the graphics system IDL. Almost all chapters have been revised, and some have undergone substantial changes like the introduction, the section about experimental data and tape handling and the chapter about the editors, where more editors are described in detail. Although many topics are still missing or could be improved, we decided to publishthe second edition of the Unix primer now in order to give a guide to the rapidly increasing Unix user community at GSI. As for the ®rst edition, many people again have contributed to this document: Wolfgang Ahner, Eliete Bertulani, Michael Dahlinger, Matthias Feyerabend, Ingo Giese, Horst GÈoringer, Eva Hocks, Peter Malzacher, Udo Meyer, Kerstin Schiebel, Kay Winkler and Heiko Weber. Preface for Version 1.0: In early summer 1991 the GSI Computing Center started a Unix Pilot Project investigating the hardware and software possibilities of centrally operated unix workstation systems. -
Summary Keyboard Mapping
Technical Bulletin Product: RUMBA OFFICE 2.0 RUMBA for UNIX RUMBA for the VAX Version #: See above Host: UNIX, VAX Summary If you find that one or more of the keys you press in RUMBA for the VAX or RUMBA for UNIX doesn't produce the effect you expect, it may be that there is a mismatch between how the keyboard is mapped in RUMBA software and how the keys are mapped on the host. By remapping the characters that a key sends, RUMBA software can emulate most keyboards and be made to work with almost any application. When a key is pressed one of two things can happen. If the key defines a "local function," RUMBA software performs that function and nothing is sent to the host. One local function is the F2 or PrintScreen key. This function does not require host interaction. RUMBA software simply copies the information from the screen to the printer. If the key does not define a local function then RUMBA will send either a single character or a string of characters to the host. This document describes how to change the character or string of characters sent by RUMBA software when a key is pressed. It also covers some basic ways to determine what the host or application expects. To effectively fix key mapping problems, you will need to talk with your system administrator and possibly with the vendor of the host application you are using. Keyboard Mapping Host applications are written for a specific host keyboard. In the case of DEC and UNIX applications, this keyboard is usually a VT keyboard. -
Keyboard Scan Code Specification
Windows Platform Design Notes Designing Hardware for the Microsoft® Windows® Family of Operating Systems Keyboard Scan Code Specification Abstract: This specification details the PS/2 Scan Codes and USB Usage Tables that are validated for compliance to the Microsoft® Windows® Logo Program testing standard. This document details the alternative make and break PS/2 scan code and USB code response for the Windows Logo Key and Application Keys, plus Advanced Configuration and Power Interface (ACPI) power controls. This specification was previous published, with the same content, as “Windows Hardware Quality Labs Keyboard Specification” and also referred to as “Windows Keys Specification” and “New Keys Specification.” Revision 1.3a — March 16, 2000 Disclaimer: The information contained in this document represents the current view of Microsoft Corporation on the issues discussed as of the date of publication. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information presented. This document is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, IN THIS DOCUMENT. Microsoft Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you any license to the patents, trademarks, copyrights, or other intellectual property rights except as expressly provided in any written license agreement from Microsoft Corporation. Microsoft does not make any representation or warranty regarding specifications in this document or any product or item developed based on these specifications. -
Hand-Held Remote Keypad for Ibm Pc-At
HAND-HELD REMOTE KEYPAD FOR IBM PC-AT PROJECT REPORT Submitted by G.RAJAJI K.RAJESH KANNAN N.UDAYA KUMAR T.N.C.VENKATA RANGAN GUIDE Mr.C.S.MOHAN RAM, M.E Lecturer Department of Electronics and Communication Engineering. In partial fulfilment of the requirements for the award of Degree of Bachelor of Engineering Department of Electronics and Communication Engineering. SRI VENKATESWARA COLLEGE OF ENGINEERING PENNALUR, SRIPERUMBUDUR - 602 105. MARCH 1996 ACKNOWLEDGEMENTS From the bottom of our heart we express our gratitude and thanks to Mr. R.Arvind, Freelance Inventor who supported us morally during our rough times and to Mr. Rajagopal P.Sarathy of Binghamton, U.S.A, who sent us the components from abroad. We also thank our Guide, Mr. C.S. Mohan Ram, Lecturer, for his support time and again. Our grateful thanks are also felt to Prof. R. Ramachandran, Head of our Department and the entire teaching and Non-teaching staff of our department, who have been with us always as a constant source of inspiration for our success. CONTENTS Synopsis 1 Design Goals 2 Infra Red Remote Control Basics 3 Development Platform 7 Technical Requirement s 8 Hardware: Hand-Held Remote Keypad 9 Inside Out 13 Software: Hand-Held Remote Keypad 47 Problems Faced 54 Applications 55 Bibliography 56 Appendix A : IR Sensor Technical Specifications Appendix B : Philips Remote Transmitter Specifications Appendix C : Photometric Terminologies Appendix D : How The 8086 Uses I/O Ports Appendix E : Interrupt And 80x86 Family SYNOPSIS Computers are now in our living rooms, the familiar sight here is a remote control used for Audio and Video Systems, and our project idea stems from here. -
Edge Manual- Sept 20.Pub
User Manual KB950 Split Programmable Backlit Mechanical 1 Kinesis Corporation 22030 20th Avenue SE, Suite 102 Bothell, Washington 98021 USA Keyboard models covered by this manual: [email protected], [email protected] KB950-BLU www.KinesisGaming.com KB950-RED KB950-BRN September 20, 2017 Edition This manual covers features included through firmware version 1.0.0. To download the latest firmware and to access all support resources visit www.KinesisGaming.com/Support. To shop for accessories visit KinesisGaming.com/Accessories: Lift Kit (AC910)- Adjustable tenting accessory (5°/10°/15°) for use with Palm Supports V3 Pro (AC930)- Adjustable tenting accessory (5°/10°/15°) for use without Palm Supports (coming soon) Palm Pads (AC700blk)- Cushioned palm pads for use with Palm Supports © 2017 by Kinesis Corporation, all rights reserved. Kinesis and Freestyle are registered trademarks of Kinesis Corporation. Freestyle Edge, SmartSet, and v-Drive are trademarks of Kinesis Corporation. All other trademarks are property of their respective owners. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any commercial purpose, without the express written permission of Kinesis Corporation. FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.