DOCSLIB.ORG

A Method for Performance Analysis of a Ramjet Engine in A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A Method for Performance Analysis of a Ramjet Engine in A View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by University of Tennessee, Knoxville: Trace University of Tennessee, Knoxville Trace: Tennessee Research and Creative Exchange Masters Theses Graduate School 5-2012 A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors Kevin Raymond Holst [email protected] Recommended Citation Holst, Kevin Raymond, "A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors. " Master's Thesis, University of Tennessee, 2012. https://trace.tennessee.edu/utk_gradthes/1163 This Thesis is brought to you for free and open access by the Graduate School at Trace: Tennessee Research and Creative Exchange. It has been accepted for inclusion in Masters Theses by an authorized administrator of Trace: Tennessee Research and Creative Exchange. For more information, please contact [email protected]. To the Graduate Council: I am submitting herewith a thesis written by Kevin Raymond Holst entitled "A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors." I have examined the final electronic copy of this thesis for form and content and recommend that it be accepted in partial fulfillment of the requirements for the degree of Master of Science, with a major in Aerospace Engineering. Basil N. Antar, Major Professor We have read this thesis and recommend its acceptance: Robert W. McAmis, Roy J. Schulz Accepted for the Council: Dixie L. Thompson Vice Provost and Dean of the Graduate School (Original signatures are on file with official student records.) A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors A Thesis Presented for the Master of Science Degree The University of Tennessee, Knoxville Kevin Raymond Holst May 2012 Approved for Public Release; Distribution is Unlimited. Copyright © 2012 by Kevin Raymond Holst All rights reserved. ii For Brian iii ACKNOWLEDGEMENTS I would like to express my heartfelt gratitude to the individuals that offered their knowledge and support during the preparation of this thesis. Dr. Rob McAmis guided me during my coursework at UTSI and helped push me to complete this thesis. Many hours were spent in his office in search of a thesis topic and a direction from which to approach it. The time he has devoted to helping me on this thesis, on my coursework, and through my career at AEDC is a testament to his high character and integrity. Dr. Doug Garrard at AEDC provided a task for me that was able to be spun into this thesis and offered his knowledge and expertise on the topic when needed. Mark Cross at AEDC made available his wealth of ground testing and uncertainty knowledge to help formulate this thesis. Dr. Roy Schulz offered a careful critique of this work which helped to clarify the topic and to give it additional technical depth. Dr. Basil Antar also provided a review of this proposal and graciously served as my thesis committee chair. Finally, I would like to acknowledge the patience and support of my wife, Kimberly. I will be forever grateful for her understanding of my desire to continue classes and complete this thesis, and her ability to help me retain my focus and positive outlook on the task. iv ABSTRACT Ramjet and scramjet engines are being developed to provide a more fuel efficient means of propulsion at high Mach numbers. Part of the development of these engines involves test and evaluation of an engine in ground facilities as well as in flight. Ground facilities, like Arnold Engineering Development Complex (AEDC) and those at engine manufacturers like General Electric (GE) and Pratt & Whitney (PW), have decades of experience testing traditional turbine engines and much less experience testing full scale ramjet engines. Testing a supersonic engine in a free-jet mode presents a host of challenges not experienced during traditional direct connect turbine engine tests. Characterizing the performance of an engine in a free-jet test facility is a difficult task due in part to the difficulty in determining how much air the engine is ingesting and the spillage, friction and base drag of the engine installation. As more exotic propulsion systems like DARPA’s Falcon Combined Cycle Engine Test (FaCET) article or NASA’s X-43 are developed, there is a greater need for effective ground tests to determine engine performance and operability prior to flight testing. This thesis proposes a method for calculating three key performance parameters (airflow, fuel flow, and thrust) and investigates the uncertainty influences for these calculations. A data reduction method was developed for this thesis to calculate the engine airflow, net thrust, and specific impulse (ISP) in a ground test of a generic ramjet engine in a free-jet test facility. It considered typical measurements for an engine test (pressures, temperatures, fuel flow, scale force, and engine and cowl geometry). Once the code was developed, an uncertainty analysis of the calculations was conducted, starting with a simplified analytical assessment. A common industry accepted uncertainty approach was then used in conjunction with the data reduction code to determine the sensitivity or influence coefficients of the independent measurements on the dependent parameters by the dithering method. These influence coefficients were v used to ascertain where measurement improvements could be made to affect the greatest reduction in uncertainty of the predicted engine performance. vi TABLE OF CONTENTS CHAPTER I Introduction and Problem Statement ............................................................ 1 Ground Test Facilities ..................................................................................................... 1 Ramjet and Scramjet Background .................................................................................. 2 Free-jet Testing Compared to Direct Connect Testing ................................................... 5 Instrumentation ............................................................................................................... 8 Data Analysis .................................................................................................................. 9 Problem Statement ........................................................................................................ 10 CHAPTER II Literature Review ...................................................................................... 11 Ramjet Performance Analysis ....................................................................................... 11 Uncertainty .................................................................................................................... 11 Measurement Uncertainty ......................................................................................... 11 Calculation Uncertainty ............................................................................................ 15 Standardization of Ramjet Performance Reporting ...................................................... 16 CHAPTER III Approach................................................................................................... 18 Outline........................................................................................................................... 18 Data Reduction.............................................................................................................. 18 Engine Airflow.......................................................................................................... 18 Engine Net Thrust ..................................................................................................... 22 Specific Impulse........................................................................................................ 24 Sample Data .................................................................................................................. 27 Uncertainty Analysis ..................................................................................................... 28 Numerical Uncertainty Analysis ............................................................................... 29 Simplified Analytical Uncertainty Analysis ............................................................. 29 CHAPTER IV Results and Discussion ............................................................................ 33 Performance Analysis ................................................................................................... 33 Uncertainty Analysis ..................................................................................................... 35 Airflow ...................................................................................................................... 35 Net Thrust ................................................................................................................. 39 vii Specific Impulse........................................................................................................ 42 CHAPTER V Conclusions and Recommendations ......................................................... 46 Works Cited ...................................................................................................................... 48 Appendix ..........................................................................................................................
Load more

Recommended publications
  • Flow Measurement Universitaet Erlangen-Nuember Reinhard Haak Universitaet Erlangen-Nuember 28.1 Differential Pressure Flowmeters Zaki D
    Richard Thorn. "Flow." Copyright 2000 CRC Press LLC. <http://www.engnetbase.com>. Richard Thorn University of Derby Adrian Melling Universitaet Erlangen-Nuember Herbert Köchner Flow Measurement Universitaet Erlangen-Nuember Reinhard Haak Universitaet Erlangen-Nuember 28.1 Differential Pressure Flowmeters Zaki D. Husain Important Principles of Fluid Flow in Pipes • Bernoulli’s Daniel Flow Products, Inc. Equation • Common Differential Pressure Flowmeters • Donald J. Wass Other Differential Pressure Flowmeters • Performance and Applications • Installation • Differential Pressure Daniel Flow Products, Inc. Measurement • Standards • Future Developments David Wadlow 28.2 Variable Area Flowmeters Sensors Research Consulting, Inc. General Description of Variable Area Flowmeters • Measuring Principles of Variable Area Flowmeters Harold M. Miller 28.3 Positive Displacement Flowmeters Data Industrial Corporation Design and Construction • Some Commercially Available Halit Eren PD Meter Designs • Advantages and Disadvantages of PD Meters • Applications • Accessories • Price and Performance Curtin University of Technology 28.4 Turbine and Vane Flowmeters Hans-Peter Vaterlaus Axial Turbine Flowmeters • Insertion Axial Turbine Rittmeyer Ltd. Flowmeters • Angular Momentum Flowmeters • Multijet Turbine Flowmeters • Cylindrical Rotor Flowmeter • Thomas Hossle Manufacturers • Conclusion Rittmeyer Ltd. 28.5 Impeller Flowmeters Paolo Giordano Sensing Principles • Flow Ranges • Installation • Manufacturers Rittmeyer Ltd. 28.6 Electromagnetic Flowmeters Christophe
    [Show full text]
  • Investigation of Fouling Mechanisms to Guide the Design of Diesel Engine
    INVESTIGATION OF FOULING MECHANISMS TO GUIDE THE DESIGN OF DIESEL ENGINE EXHAUST DRIVEN ABSORPTION HEAT PUMPS A Thesis Presented to The Academic Faculty by Victor C. Aiello In Partial Fulfillment of the Requirements for the Degree Master of Science in the School of Mechanical Engineering Georgia Institute of Technology December 2016 COPYRIGHT © 2016 BY VICTOR AIELLO INVESTIGATION OF FOULING MECHANISMS TO GUIDE THE DESIGN OF DIESEL ENGINE EXHAUST DRIVEN ABSORPTION HEAT PUMPS Approved by: Dr. Srinivas Garimella, Advisor School of Mechanical Engineering Georgia Institute of Technology Dr. William J. Wepfer School of Mechanical Engineering Georgia Institute of Technology Dr. Peter Loutzenhiser School of Mechanical Engineering Georgia Institute of Technology Date Approved: November 21, 2016 ACKNOWLEDGEMENTS I would first like to thank my advisor, Dr. Srinivas Garimella, for providing the opportunity to work on an intriguing and challenging research project. I am grateful for being given a balance of direction and autonomy that has allowed for an invaluable learning experience. I would also like to thank the members of the Sustainable Thermal Systems Lab for their unique willingness to provide technical guidance and support. I would particularly like to thank Marcel Staedter for his mentorship and Girish Kini for his incredible dedication to this research project. It has been an honor to work with and learn from such an inspiring and hard working group of people. Lastly, I would like to thank my family, for this accomplishment would not have been possible without their unwavering support. iii TABLE OF CONTENTS ACKNOWLEDGEMENTS iii LIST OF TABLES vii LIST OF FIGURES x LIST OF SYMBOLS AND ABBREVIATIONS xvii SUMMARY xx CHAPTER 1.
    [Show full text]
  • The Dimnum Package
    The dimnum package Miguel R. Clemente [email protected] v1.0.1 from 2021/04/05 Note: Prandtl number is redefined from the amsmath package. 1 Introduction This package simplifies the calling of Dimensionless Numbers in math or text mode. In Table 1 you can find all available Dimensionless Numbers. 2 Usage A Dimensionless number is composed of four items: the command, the symbol, the name, its identifier. You can call a Dimensionless Number in three distinct ways: by its symbol { using the command (i.e. \Ar { Ar). by its name (short version) { appending [s] to the command (i.e. \Bi[s] { Biot). by its name and identifier (long version) { appending [l] to the command (i.e. \Kn[l] { Knudsen number). Symbol, short and long versions, all work in math or text mode without the need of further commands. 1 Besides the comprehensive list of included Dimensionless Numbers, this pack- age also introduces a command to create new Dimensionless Numbers. Creating a Dimensionless Number is achieved by using \newdimnum{\command}{symbol}{name}{identifier} for example, to add the Morton number we write \newdimnum{\Mo}{Mo}{Morton}{number} The identifier can be left empty, such as in the case of Drag Coefficient \newdimnum{Cd}{\ensuremath{C_d}}{Drag Coefficient}{} in this example we also introduce an important command. When the Dimension- less Number symbol is always expressed in math mode { either by definition or the use of subscripts or superscripts { we add \ensuremath{} to encompass the symbol, ensuring a proper representation of the Dimensionless Number. You can add your own Dimensionless Numbers to your projects.
    [Show full text]
  • CFD Analysis of Viscosity Effects on Turbine Flow Meter Performance and Calibration
    University of Tennessee, Knoxville TRACE: Tennessee Research and Creative Exchange Masters Theses Graduate School 5-2015 CFD Analysis of Viscosity Effects on Turbine Flow Meter Performance and Calibration Carl Tegtmeier University of Tennessee - Knoxville, [email protected] Follow this and additional works at: https://trace.tennessee.edu/utk_gradthes Part of the Aerodynamics and Fluid Mechanics Commons, and the Computer-Aided Engineering and Design Commons Recommended Citation Tegtmeier, Carl, "CFD Analysis of Viscosity Effects on Turbine Flow Meter Performance and Calibration. " Master's Thesis, University of Tennessee, 2015. https://trace.tennessee.edu/utk_gradthes/3415 This Thesis is brought to you for free and open access by the Graduate School at TRACE: Tennessee Research and Creative Exchange. It has been accepted for inclusion in Masters Theses by an authorized administrator of TRACE: Tennessee Research and Creative Exchange. For more information, please contact [email protected]. To the Graduate Council: I am submitting herewith a thesis written by Carl Tegtmeier entitled "CFD Analysis of Viscosity Effects on Turbine Flow Meter Performance and Calibration." I have examined the final electronic copy of this thesis for form and content and recommend that it be accepted in partial fulfillment of the equirr ements for the degree of Master of Science, with a major in Mechanical Engineering. Phuriwat Anusonti-Inthra, Major Professor We have read this thesis and recommend its acceptance: Ahmad Vakili, Trevor Moeller Accepted for the Council: Carolyn R. Hodges Vice Provost and Dean of the Graduate School (Original signatures are on file with official studentecor r ds.) CFD Analysis of Viscosity Effects on Turbine Flow Meter Performance and Calibration A Thesis Presented for the Master of Science Degree The University of Tennessee, Knoxville Carl Tegtmeier May 2015 ACKNOWLEDGEMENTS I wish to thank all the people who helped me complete my Master of Science in Mechanical Engineering.
    [Show full text]
  • A Numerical and Experimental Investigation of Flow Induced Noise
    University of South Florida Scholar Commons Graduate Theses and Dissertations Graduate School January 2015 A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves Mutasim Mohamed Elsheikh University of South Florida, [email protected] Follow this and additional works at: http://scholarcommons.usf.edu/etd Part of the Mechanical Engineering Commons Scholar Commons Citation Elsheikh, Mutasim Mohamed, "A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves" (2015). Graduate Theses and Dissertations. http://scholarcommons.usf.edu/etd/5683 This Dissertation is brought to you for free and open access by the Graduate School at Scholar Commons. It has been accepted for inclusion in Graduate Theses and Dissertations by an authorized administrator of Scholar Commons. For more information, please contact [email protected]. A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves by Mutasim Elsheikh A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy Department of Mechanical Engineering College of Engineering University of South Florida Co-Major Professor: Jose L. F. Porteiro, Ph.D. Co-Major Professor: Steven T. Weber, Ph.D. Rajiv Dubey, Ph.D. Richard Gilbert, Ph.D. Craig Lusk, Ph.D. Kandethody M. Ramachandran, Ph.D. Date of Approval: June 23, 2015 Keywords: Steady State, Unsteady State Analysis, Fluid Flow, Mass Flow Rate, High Pressure, Low Pressure Copyright © 2015, Mutasim Elsheikh DEDICATION To my mother, Azeeza, Thank you for everything that you have done, for all of your love and support. To my wife, Haifa, and our lovely Kids, Azeeza, Magdi and Rawan.
    [Show full text]
  • Dynamics of Vortex Shedding from Slender Cones
    School of Engineering and Materials Science Queen Mary, University of London Dynamics of vortex shedding from slender cones Chetan Sakaleshpur Jagadeesh A thesis submitted for the degree of Doctor of Philosophy at the University of London 2009 I certify that this thesis, and the research to which it refers, are the product of my own work, and that any idea or quotation from this work of other people, published or otherwise, are fully acknowledged in accordance with the standard referencing practices of the discipline. Chetan Sakaleshpur Jagadeesh i Firstly, I would like to extend my deepest gratitude to my supervisor, Professor Michael Gaster, F.R.S., who inspired the present work (2009 also happens to be the 40th anniversary of his first publication on Vortex Shedding from Cones). It has been a great honour and pleasure to work under his guidance. His unique insight into many problems of fluid mechanics provides a never-ending stream of original ideas, whose pursuit is only constrained by time. Thanks are due to Dr. O.N.Ramesh, Indian Institute of Science, Bangalore, India for providing me with an opportunity to pursue a career in research. Acknowledgement is expressed to the members of staff at the School of Engineering & Materials Science, particularly to Mr. Michael Collins for his ingenuity and superb craftsmanship. I must also thank my colleagues, Mr. Zaheer Ikram, Mr. Mayo Adetoro, Mr. Jerome Irianto who provided both a pleasant working environment and a wider perspective of current research in fields beyond fluid dynamics. I would also like to acknowledge the financial support provided by Boeing Commercial Airplanes, Seattle in the form of a studentship.
    [Show full text]
  • Fluid Dynamic Assessment of Sensor Geometry for Micro System Applications
    Fluid Dynamic Assessment of Sensor Geometry For Micro System Applications Mohamed Hassan Ph.D. Thesis In The Department of Mechanical and Industrial Engineering Presented in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy at Concordia University Montreal, Quebec, Canada September, 2015 © Mohamed Hassan, 2015 CONCORDIA UNIVERSITY School of Graduate Studies This is to certify that the thesis prepared By: Mohamed Hassan Entitled: Fluid Dynamic Assessment of Sensor Geometry for Micro System Applications and submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy complies with the regulations of the University and meets the accepted standards with respect to originality and quality. Signed by the examining committee: -------------------------------------------------- Dr. (chair) -------------------------------------------------- Dr. Metin Yaras (External Examiner) -------------------------------------------------- Dr. Samuel Li (Ext.-to-Program) -------------------------------------------------- Dr. Hoi Dick Ng (Examiner) -------------------------------------------------- Dr. Ion Stiharu (Examiner) -------------------------------------------------- Dr. Georgios Vatistas (Examiner) -------------------------------------------------- Dr. Wahid Ghaly (Supervisor) Approved by ------------------------------------------------------------------------------------------- Department Chair or Graduate Program Director ----------------2015--------------------------------------------------------------------------------------
    [Show full text]
  • Extended Lee Model for the Turbine Meter & Calibrations with Surrogate Fluids This Article Can Be Found Published in Flow Me
    Extended Lee Model for the Turbine Meter & Calibrations with Surrogate Fluids This article can be found published in Flow Measurement and Instrumentation, 2012; 24: 71 − 82 Jodie G. Pope, John D. Wright, Aaron N. Johnson and Michael R. Moldover National Institute of Standards and Technology, Gaithersburg, MD, USA Tel: 301-975-4586, Fax: 301-258-9201, E-mail: [email protected], [email protected], [email protected] and [email protected] Abstract: We developed a physical model termed the “extended Lee model” for calibrating turbine meters to account for 1) fluid drag on the rotor, 2) bearing static drag and 3) bearing viscous drag. We tested the extended Lee model using a dual rotor, 2.5 cm diameter turbine meter and accurate flow measurements spanning a 200:1 flow range (50 Re 109,000) with liquid mixtures spanning a 42:1 kinematic viscosity range (1.2 × 106 m2/s ν 50 × 106 m2/s). For Re > 3500, the model correlates the volumetric flow data within 0.2 %. For Re 3500, deviations from the model increase, reaching 3.6 % at the lowest flows. The same data has a maximum deviation of 17 % from the commonly used Strouhal versus Roshko (or Re) correlation. For all the mixtures tested, the static bearing friction dominates the rotor’s behavior when Re < 1350 and it results in corrections as large as 51 % of the calibration factor. In a second set of experiments, we compared our calibration using Stoddard solvent (a kerosene-like hydrocarbon with ν 1.2 × 106 m2/s at 21 °C) with our calibrations using four different mixtures of propylene glycol and water (PG+W).
    [Show full text]
  • Instability Analysis and Suppression of Instability in Low-Density Gas Jets Sukanta Bhattacharjee Louisiana State University and Agricultural and Mechanical College
    Louisiana State University LSU Digital Commons LSU Master's Theses Graduate School 2013 Instability analysis and suppression of instability in low-density gas jets Sukanta Bhattacharjee Louisiana State University and Agricultural and Mechanical College Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_theses Part of the Mechanical Engineering Commons Recommended Citation Bhattacharjee, Sukanta, "Instability analysis and suppression of instability in low-density gas jets" (2013). LSU Master's Theses. 906. https://digitalcommons.lsu.edu/gradschool_theses/906 This Thesis is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Master's Theses by an authorized graduate school editor of LSU Digital Commons. For more information, please contact [email protected]. INSTABILITY ANALYSIS AND SUPPRESSION OF INSTABILITY IN LOW- DENSITY GAS JETS A Thesis Submitted to the Graduate Faculty of the Louisiana State University and Agricultural and Mechanical College in partial fulfillment of the requirements for the degree of Masters of Science in Mechanical Engineering in The Department of Mechanical Engineering by Sukanta Bhattacharjee B.S., Bangladesh University of Engineering and Technology, 2008 August 2013 This thesis is dedicated to my parents, Manik Chandra Bhattacharjee and Supriti Rani Chakraborty, who are with me along these years and assist in terms of guidance, encouragement, advice, monetary support, mental support, and time. ii ACKNOWLEDGEMENTS I would like to thank my advisor Dr. Sumanta Acharya who provides me support and advices in my research work during these years. I thank all of my friends and colleagues I worked with, Baine, James, Krishnendu, Pranay, Sheng, Srinibas, Susheel and especially Prasad.
    [Show full text]
  • Two‑Stream Mixing Flow with Streamwise Vorticity
    This document is downloaded from DR‑NTU (https://dr.ntu.edu.sg) Nanyang Technological University, Singapore. Two‑stream mixing flow with streamwise vorticity Mao, Rong Hai 2005 Mao, R. H. (2005). Two‑stream mixing flow with streamwise vorticity. Doctoral thesis, Nanyang Technological University, Singapore. https://hdl.handle.net/10356/6136 https://doi.org/10.32657/10356/6136 Nanyang Technological University Downloaded on 11 Oct 2021 14:25:42 SGT ATTENTION: The Singapore Copyright Act applies to the use of this document. Nanyang Technological University Library TWO-STREAM MIXING FLOW WITH STREAMWISE VORTICITY SCHOOL OF MECHANICAL AND PRODUCTION ENGINEERING NMANGTECHNQLOGICAL UNIVERSITY SINGAPORE ATTENTION: The Singapore Copyright Act applies to the use of this document. Nanyang Technological University Library Two-stream Mixing Flow with Streamwise Vorticity Mao Ronghai M.Sc. (CAS) School of Mechanical and Production Engineering A thesis submitted to the Nanyang Technological University in fulfillment of the requirement for the degree of Doctor of Philosophy in Mechanical and Aerospace Engineering ATTENTION: The Singapore Copyright Act applies to the use of this document. Nanyang Technological University Library Abstract ABSTRACT The aerodynamic characteristics of the single-lobe forced mixer have been extensively examined in the present dissertation. Nine single-lobe models with different parameters and geometry configurations were designed and fabricated. Penetration angles, lobe wavelengths, trailing edge configurations and modifications vary from case to case. Flat plate (to simulate plane free shear layer) and convoluted plate (to generate normal K-H vortex without streamwise vortex) have also been tested as baselines for comparison. Two velocity ratios, i.e., r =1: 1 and 0.4: 1 and Reynolds numbers (based on the wavelength of the basic single-lobe forced mixer) ranged from 9,200 to 40,000 have been chosen and tested.
    [Show full text]
  • JANUARY-MARCH 2016 Vol.22, Number 1, 1-126
    ISSN 1451 - 9372(Print) ISSN 2217 - 7434(Online) JANUARY-MARCH 2016 Vol.22, Number 1, 1-126 www.ache.org.rs/ciceq Journal of the Association of Chemical Engineers of Serbia, Belgrade, Serbia Vol. 22 Belgrade, January-March 2016 No. 1 Chemical Industry & Chemical Engineering CONTENTS Quarterly (ISSN 1451-9372) is published quarterly by the Association of Chemical Shenghua Zhu, Yonghui Bai, Lunjing Yan, Qiaoling Hao Engineers of Serbia, Kneza Miloša 9/I, 11000 Belgrade, Serbia Fan Li, Characteristics and synergistic effects of co- pyrolysis of Yining coal and poplar sawdust .......................... 1 Editor: Jasmina Gubić, Jelena Tomić, Aleksandra Torbica, Mirela Vlada B. Veljković Iličić, Tatjana Tasić, Ljubiša Šarić, Sanja Popović, [email protected] Characterization of several milk proteins in domestic balkan donkey breed during lactation, using lab-on-a- Editorial Office: -chip capillary electrophoresis ................................................ 9 Kneza Miloša 9/I, 11000 Belgrade, Serbia Phone/Fax: +381 (0)11 3240 018 Seyed Ali Alavi Fazel, Goharshad Hosseyni, Experimental E-mail: [email protected] investigation on partial pool boiling heat transfer in www.ache.org.rs pure liquids ........................................................................... 17 Marija Ilić, Franz-Hubert Haegel, Vesna Pavelkić, Dragan For publisher: Tatijana Duduković Zlatanović, Snežana Nikolić-Mandić, Aleksandar Lolić, Zoran Nedić, The Influence of alkyl polyglucosides Secretary of the Editorial Office: (and highly ethoxylated alcohol boosters) on the phase Slavica Desnica behavior of a water/toluene/technical alkyl poly- ethoxylate microemulsion system ........................................ 27 Marketing and advertising: V. Sangeetha, V. Sivakumar, biogas production from AChE Marketing Office synthetic sago wastewater by anaerobic digestion: Kneza Miloša 9/I, 11000 Belgrade, Serbia Phone/Fax: +381 (0)11 3240 018 optimization and treatment ..................................................
    [Show full text]
  • Study of Vortex-Induced Vibrations in Off-Shore Structures
    Study of vortex-induced vibrations in off-shore structures Von der Fakultät für Ingenieurwissenschaften, Abteilung Maschinenbau und Verfahrenstechnik der Universität Duisburg-Essen zur Erlangung des akademischen Grades eines Doktors der Ingenieurwissenschaften Dr.-Ing. genehmigte Dissertation von Mohammed Abdulaziz aus Ägypten Gutachter: Univ.-Prof. Dr.-Ing. Betar Ould el Moctar Univ.-Prof. Dr.-Ing. Wojciech Kowalczyk Tag der mündlichen Prüfung: 20.03.2017 Study of the vortex-induced vibrations in off-shore structures By Mohammed Abdulaziz Submitted to Institute of Ship Technology, Ocean Engineering and Transport Systems (ISMT) in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the UNIVERSITY OF DUISBURG-ESSEN Supervisor: Univ. Prof. Dr. {Ing. Bettar Ould el Moctar Co-supervisor: Univ. Prof. Dr. {Ing. Wojciech Kowalczyk Acknowledgments This doctoral thesis is my performed task as a doctoral student at the Insti- tute of Ship Technology, Ocean Engineering and Transport Systems (ISMT) at the university of Duisburg-Essen, Duisburg, Germany. I would like to introduce my thanks to my supervisor Mr. Prof. Dr. {Ing Bettar Ould el Moctar for continual encouragement and patient guidance throughout the course of this work. 1 Abstract The flow around different geometric obstacles is a challenging research topic. The continual change of flow separation points positions on the obstacle sur- face generates the vortices in downstream flow within a phenomenon called vortex shedding, which was originally discussed by Mr. von K´arm´an. Be- cause of this continuous relocation of separation points on the obstacle sur- face, both the pressure and forces differ in an unstable scenario on the ob- stacle surface.
    [Show full text]