M.S. Ramaiah University of Applied Sciences, Bangalore-560054

By Prof. S.R. Shankapal Vice-Chancellor

1 © Ramaiah University of Applied Sciences Contents 1. University 15. Technology Incubation and Entrepreneurship 2. Academic Programmes and Development Centre Curriculum 16. Student Affairs 3. Curriculum Development 17. RUAS Innovation Centre 4. Admissions 18. Transferable Skills and Leadership 5. Teaching and Learning Resources Development 6. Academic Programme Administration 19. International Collaborations and Partnership Management(ICPM) 7. Teaching, Learning and Assessment 20. Faculty and Academic Leadership 8. Quality Assurance Development 9. Award of Degree 21. Prestigious Lectures at RUAS 10. Reservations and Diversity 22. Human Resources Policies and Staff Appraisal 11. Pedagogy and Digital Initiatives 23. Support from Industries & Businesses 12. Research 24. Public Relations and Publicity 13. Training & Lifelong Learning 25. Social Media 14. Techno Centre 26. Rural Development Cell 2 © Ramaiah University of Applied Sciences 1. University

3 © Ramaiah University of Applied Sciences Ramaiah University of Applied Sciences

University House, Gnanagangothri Campus, New BEL Road, MSR Nagar, Bangalore-560054 Ph: 080-4536 6666 Mail: [email protected] Web: www.msruas.ac.in 4 © Ramaiah University of Applied Sciences Founders GEF- Gokula Education Foundation-1962 M.S. Ramaiah – A Public Charitable Trust 1922-1997

Dr. M.R. Jayaram, Chairman

Engineering and General Sciences Health Sciences University of Applied Sciences

Faculty of 1. Ramaiah Institute of Technology (1962) 1. Ramaiah Medical College (1979) 1. Engineering and Technology 2. Ramaiah Polytechnic (1997) 2. Ramaiah Medical College Hospital(1984) 2. Art and Design 3. Ramaiah College of Arts, Science and 3. Ramaiah Memorial Hospital(2004) 3. Management and Commerce (1994) 4. Ramaiah Institute of Nursing Education and Commerce Research ( 1987) 4. Mathematical and Physical 4. Ramaiah Composite PU College(1993) 5. Ramaiah Institute of Physiotherapy (1996) 5. Ramaiah Vidyaniketan(1994) Sciences 6. Ramaiah International Medical School 5. Biological and Life Sciences 6. Ramaiah High School 7. Ramaiah INDIC Specialty Ayurveda 6. Dental Sciences 7. Ramaiah College of Education 8. Ramaiah HCG Cancer Centre 7. Pharmacy 8. Ramaiah College of Law (1995) 9. Ramaiah Milan Fertility Centre 8. Hospitality Management 9. Ramaiah Institute of Management (1995) 10. Ramaiah Narayana Heart Centre and Catering Technology 11. Ramaiah Metropolis 12. Ramaiah Institute of Neuro Sciences (UG and PG Programmes) 13. Ramaiah Centre for Rehabilitation 14. Ramaiah Drugs and Allied Products Testing Laboratory 5 © Ramaiah University of Applied Sciences GEF (Medical)-Trustees

S. No. Name Designation S. No. Name Designation 1 Dr. M.R. Jayaram Chairman 10 Smt. M.R. Prabhavathy Advisor 2 Shri. M.R. Sampangiramaiah Advisor 11 Smt. Jayakumari Jayaram Advisor 3 Shri. M.R. Seetharam Advisor 12 Smt. Indirarani S Ramaiah Advisor 4 Shri. M.R. Pattabhiram Advisor 13 Shri. M.J. Shantharam Advisor 5 Shri. M.R. Janakiram Advisor 14 Shri. M.S. Rajaram Advisor 6 Shri. M.R. Kodandaram Advisor 15 Smt. Raksha Ramaiah Advisor 7 Shri. M.R. Anandaram Advisor 16 Smt. Pushpa Prasanna Advisor 8 Shri. M.R. Ramaiah Advisor 17 Smt. M.R. Rani Advisor 9 Smt. M.R. Padmavathy Advisor 18 Shri. M. A. Navakotiram Advisor

6 © Ramaiah University of Applied Sciences University Act

• M.S. Ramaiah University of Applied Sciences is a Private University –Created by a separate Act of the State of Karnataka, Govt. of India • M.S. Ramaiah University of Applied Sciences Act-2013 (http://www.msruas.ac.in/pdf_files/University/uni_act13.pdf) • Govt. of Karnataka Notification

(http://www.msruas.ac.in/pdf_files/University/msruas_notification.pdf) • Established on 30th December 2013 • University was Launched on 18th March 2014 – Dr. Anil Kakodkar was the Chief Guest • A comprehensive University • Unitary in nature

7 © Ramaiah University of Applied Sciences UGC Expert Committee Visit- 13/14th Feb 2016

Prof. G. D. Yadav Prof. A. P. Singh Dr. V. K. Nangia Dr. Bharat Shetty Prof. Dharam Pal Pathak

Prof. Rakesh Kumar Gupta Dr. Anil Kumar Gupta Prof. B. Rajashekar Prof. Dr. Saranjit Singh Prof. B. Jayakar Bhasin

Dr. A. Raghuram Rao Dr. N. Gopukumar Dr. A U Ravishankar Prof. P. Duraisamy 8 © Ramaiah University of Applied Sciences UGC-Approved University

9 © Ramaiah University of Applied Sciences NIRF Rank-2016

10 © Ramaiah University of Applied Sciences K-SURF

11 © Ramaiah University of Applied Sciences Statutory Bodies

• Board of Governors (BoG) • Board of Management (BoM) • Academic Council (AC) • Research and Innovation Council (RIC) • Skills and Vocational Training Council (SVTC) • Finance Committee (FC)

12 © Ramaiah University of Applied Sciences Board of Governors (BoG) S. No. Name Designation Appointed by 1 Dr. M.R. Jayaram Chairperson SB 2 Mr. M.R. Kodandaram Member SB 3 Mrs. M.R. Prabhavathy Member SB 4 Principal Secretary, HE, GoK Member GoK 5 Principal Secretary, ME, GoK Member GoK

6 Dr. K. R. S. Murthy - Former Director IIMB Member GoK 7 Dr. Y.S. Rajan - Formerly, Chairman TIFAC, ISRO, GoI Member Chancellor

8 Dr. R. Natarajan - Former Director IITM, Former Chairman, AICTE Member Chancellor 9 Dr. S.R. Shankapal (VC) Member Chancellor

10 Dr. Govind R. Kadambi (PVC) Member (Non Chancellor Voting) 11 Mr. N.C. Shekar (Registrar & CFO) Member Chancellor Secretary SB: Sponsoring Body

13 © Ramaiah University of Applied Sciences Board of Management (BoM) S. No. Name Affiliation Membership Appointed by 1 Prof. S.R. Shankapal Vice Chancellor Chairperson Chancellor

2 Mr. Venugopal Sastry Chief Executive (GEF (M)) Member SB

3 Mr. B.N. Subramanya Advisor (GEF (M)) Member SB

4 Prof. Govind R. Kadambi Pro Vice Chancellor (SEG) Member Chancellor

5 N.C. Shekar Registrar & CFO Member-Secretary Chancellor

6 Dr. Pushpanjali K. Academic Registrar Member Vice Chancellor

7 Dr. Arulanantham Dean-FET Member Vice Chancellor

8 Prof. B.V. Sreenivasa Murthy Dean-FDS Member Vice Chancellor

9 Prof. V. Madhavan Dean – FPH Member Vice Chancellor

10 Prof. Abby Mathew Dean – FHMCT Member Vice Chancellor

11 Dr. H.S. Srivatsa Dean – FMC Member Vice Chancellor

12 Dr. Deepak A.S. Dean-FMPS Member Vice Chancellor

13 Mr. Lohith H.S. Associate Dean – FAD Member Vice Chancellor

SB: Sponsoring Body 14 © Ramaiah University of Applied Sciences Academic Council (AC) S. No. Name Affiliation Designation Appointed by 1 Dr. S. R. Shankapal Vice Chancellor Chairperson Chancellor 2 Dr. Govind R. Kadambi Pro Vice Chancellor Member Chancellor 3 Mr. N. C. Shekar Registrar & CFO Member Chancellor 4 Dr. Pushpanjali K. Academic Registrar Member - Secretary Vice Chancellor 5 Dr. H.K. Narahari Dean-FET Member Vice Chancellor 6 Dr. B.V. Sreenivasa Dean-FDS Member Vice Chancellor Murthy 7 Dr. V. Madhavan Dean – FPH Member Vice Chancellor 8 Prof. Abby Mathew Dean – FHMCT Member Vice Chancellor 9 Dr. N. Suresh Dean – FMC Member Vice Chancellor 10 Dr. Deepak A Dean – FMPS Member Vice Chancellor 11 Prof. Eugene Lai NTU - UK Member Vice Chancellor

15 © Ramaiah University of Applied Sciences Academic Council (AC) (Contd.) S. No. Name Affiliation Designation Appointed by 12 Prof. Ravishankar NITK - Surathkal Member Vice Chancellor 13 Dr. Salma Khanam Al-Ameen College of Member Vice Chancellor Pharmacy - Bangalore 14 Dr. Yathindra L. NIFT - Bangalore Member Vice Chancellor 15 Prof. K.K. Choudhary ISI - Bangalore Member Vice Chancellor 16 Dr. K. Krishnaraj Himalaya Drug Company Member Vice Chancellor 17 Dr. S.H. Srinivasan Amazon - Bangalore Member Vice Chancellor 18 Mr. Baskaran R. BOSCH Ltd. - Bangalore Member Vice Chancellor 19 Dr. Gurmail Singh NTU - UK Member Vice Chancellor 20 Prof. H. L. Bhat IISc - Bangalore Member Vice Chancellor 21 Prof. MythilyRamaswamy Tata Institute of Fundamental Member Vice Chancellor Research. Centre for Applicable Mathematics 22 Dr. Ramesh Professor & Dean, Faculty of Member Vice Chancellor Commerce & Management, Mount Carmel College 23 Dr. Jaykar Shetty Vice-Principal, Maruthi Dental Member Vice Chancellor College 16 © Ramaiah University of Applied Sciences Research and Innovation Council (RIC) S. No. Name Affiliation Designation Appointed by 1 Dr. S. R. Shankapal Vice Chancellor Chairperson Chancellor 2 Dr. Govind R. Kadambi Pro Vice Chancellor Member- Secretary Chancellor 3 Mr. N. C. Shekar Registrar & CFO Member Chancellor 4 Dr. Pushpanjali K. Academic Registrar Member Vice Chancellor 5 Dr. Arulanatham Dean-FET Member Vice Chancellor 6 Dr. B.V. Sreenivasa Murthy Dean-FDS Member Vice Chancellor 7 Dr. V. Madhavan Dean – FPH Member Vice Chancellor 8 Prof. Raghunandan Retd. Scientist, IISC - Bangalore Member Vice Chancellor 9 Prof. V. Prakash Formerly Distinguished Scientist, CSIR- Member Vice Chancellor India 10 Prof. A. Anantharaman Visiting Professor, Member Vice Chancellor Harvard Business School - Strategy & General Management 11 Dr. N. Venkateswaran Head - Competency Development, ABB Member Vice Chancellor India Pvt. Ltd. 12 Dr. S. Srinivasa Rao CVRDE - Chennai Member Vice Chancellor 13 Dr. M.S. Muthumurugan Sri Ramachandra University, Porur - Member Vice Chancellor Chennai 14 Dr. T. Thanga Mariappan Biocon Bristol Myers Squibb R & D Member Vice Chancellor Centre, Bangalore 15 Dr. K. M. Sharath Kumar Deputy Director – Sponsored Research Member Vice Chancellor 17 © Ramaiah University of Applied Sciences Skills and Vocational Training Council (SVTC) S. No. Name Affiliation Designation Appointed by 1 Prof. S. R. Shankapal Vice Chancellor Chairperson Chancellor

2 CA. N. C. Shekar Registrar & CFO Member Vice Chancellor

3 Dr. K. Pushpanjali Academic Registrar Member Vice Chancellor

4 Prof. H. K. Narahari Dean – FET Member Vice Chancellor

5 Dr. B. V. Sreenivasa Murthy Dean – FDS Member Vice Chancellor

6 Dr. V. Madhavan Dean – FPH Member Vice Chancellor

7 Prof. Abby Mathew Dean – FHMCT Member Vice Chancellor

8 Mr. H. S. Lohith Assoc Dean – FAD Member Vice Chancellor

9 Dr. H. S. Srivatsa Dean – FMC Member Vice Chancellor

10 Dr. Deepak A Dean-MPS Member Vice Chancellor

11 Dr. Arup Bhattacharya Director-DTLLL Member-Secretary Vice Chancellor

12 Mr. Jyothi Shankar Director - TSLD Member Vice Chancellor

18 © Ramaiah University of Applied Sciences Skills and Vocational Training Council (SVTC)

S. No. Name Affiliation Designation Appointed by Secretary General, Chamber of Vice Chancellor 13 Mr. N. Parthasarathi Member Industry and Commerce, Bangalore

14 Dr. Rajkumar Alle Karnataka State Dental Council Member Vice Chancellor

Former President, Peenya Vice Chancellor 15 Mr. Hareesh Hegde Member Industries Association, KASSIA

Former President, Peenya Vice Chancellor 16 Mrs. Latha Girish Member Industries Association

Sr. Partner, Vishnu Daya & Co, Vice Chancellor 17 CA Vishnu Moorthi Member Chartered Accountants

Director, HR & Business dev , Taj Vice Chancellor 18 Mr. Murali Krishnan Member West End

19 Mrs. Uma Reddy Former President CLIK Member Vice Chancellor

Gen Manager, Methods and Plant Vice Chancellor 20 Mr. Madhusudhan Member Engineering, Ace Designers.

21 Mr. Jays Chandy HR Consultant Member Vice Chancellor 19 © Ramaiah University of Applied Sciences Finance Committee (FC)

S. No. Name Affiliation Designation Appointed by 1 M.R. Sreenivasa Murthy Chief Executive, GEF(M) Chair Person SB 2 Mr. Venugopala Sastry CFO,GEF(M) Chairman SB 3 Prof. S.R. Shankapal Vice Chancellor, RUAS Member Chancellor 4 Mr. B.N. Subramanya Financial Advisor (GEF (M)) Member SB 5 N.C. Shekar Registrar & CFO,RUAS Member- Chancellor Secretary

SB: Sponsoring Body

20 © Ramaiah University of Applied Sciences Vision & Mission

Vision

“MSRUAS aspires to be the premier university of choice in Asia for student centric

professional education and services with a strong focus on applied research whilst maintaining the highest academic and ethical standards in a creative and

innovative environment”

Mission

Our purpose is the creation and dissemination of knowledge. We are committed to creativity, innovation and excellence in our teaching

and research. We value integrity, quality and teamwork in all our

endeavours. We inspire critical thinking, personal development and a passion for lifelong learning. We serve the technical, scientific and

economic needs of our Society.

21 © Ramaiah University of Applied Sciences 1. To disseminate knowledge and skills through instructions, teaching, training, seminars, workshops and

symposia in Engineering and Technology, Art and Design, Management and Commerce, Health and Allied

Sciences, Physical and Life Sciences, Arts, Humanities and Social Sciences to equip students and scholars

to meet the needs of industries, business and society

2. To generate knowledge through research in Engineering and Technology, Art and Design, Management

and Commerce, Health and Allied Sciences, Physical and Life Sciences, Arts, Humanities and Social

Sciences to meet the challenges that arise in industry, business and society

3. To promote health, human well being and provide wholistic healthcare

4. To provide technical and scientific solutions to real life problems posed by industry, business and Objectives society in Engineering and Technology, Art and Design, Management and Commerce, Health and Allied

Sciences, Physical and Life Sciences, Arts, Humanities and Social Sciences

5. To instill the spirit of entrepreneurship in our youth to help create more career opportunities in the

society by incubating and nurturing technology product ideas and supporting technology backed

business

6. To identify and nurture leadership skills in students and help in the development of our future leaders to

enrich the society we live in

7. To develop partnership with universities, industries, businesses, research establishments, NGOs,

international organisations, governmental organisations in India and abroad to enrich the experiences of

faculties and students through research and developmental programmes 22 © Ramaiah University of Applied Sciences University Logo

23 © Ramaiah University of Applied Sciences Envisaged Outputs of the University

Graduates, Postgraduates, Researchers Faculty and Staff Research Publications

Research Projects and Grants

IP and Patents Students and University Delegates Industrial Research and Problem Solving

Training and Skill Development

Physical and Technology and Business Incubation Learning Resources Community Services

24 © Ramaiah University of Applied Sciences University Model

Quality Assurance Pedagogy & Digital learning Faculty and Academic Cell Initiatives Cell Leadership Development Cell Research Centres • Automotive Technologies Research Centre International Collaborations • Centre for Aeronautical and Micro Social Media cell Air Vehicles Research Faculty of & Partnership Management • Energy and Power Systems Research 1. Engineering and Technology Centre • Sanitation, Waste Management and 2. Art and Design Public Relations Transferable Skills & Environmental Engineering Research

Alumni 3. Management and Commerce & Publicity Leadership Development Centre

Association 4. Mathematical and Physical • Centre for Machine Learning and Computational Intelligence Sciences • Centre for Control Systems and Robotics Research 5. Biological and Life Sciences Admissions • Centre for Biomedical Systems and 3D Printing 6. Dental Sciences Research • Centre for Signal Processing and Communication 7. Pharmacy Sponsored Systems Research Research

8. Hospitality Management and • Structural Design and Analysis Centre Affairs Student Student Catering Technology • Composite Materials and Technologies Research ACADEMICS RESEARCH Centre (UG and PG Programmes) • Research Centre for Contemporary Tools and Techniques in Industrial Design • Innovation and Entrepreneurship Development Research Centre RUAS • Photonics Research Centre Innovation Centre TRAINING • Centre for Batteries and Biofuel Research TECHNO • Software Engineering and Big Data Modelling & LIFELONG Research Centre CENTRE • Nutraceutical and Nutrition Research Centre LEARNING • Oral Cancer Research Centre • Biomaterials Research Centre • Dental and Maxillofacial Modelling and Simulation Centre • Drug Design and Development Centre Industrial Research, Problem Solving, • Pharmacological Modelling and Simulation Centre RUAS Competency Centre RUAS Vocational School Product Development (PhD & Sponsored Research) Technology Business Incubation & PgC, PgD Certificate Entrepreneurship Development ACP, MTP B. Voc. UoPC Engineering Centre for Composite in Emerging CTP in Health Program Program- Areas in Engg. Sciences -mes mes Technologies (VAT - KNRTU)

Karnataka Aerospace Technology Centre (KATC) - GoK

Ramaiah Innovation Centre for Healthcare Technology 2525 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences ORGANISATION Board of Governors Chancellor CHART Finance Committee Vice - Chancellor University Secretariat Board of Management Director - Admissions Academic Council Director - Public Relations & Publicity Head - Social Media Cel Research & Innovation Council

PVC PVC PVC Registrar & CFO ( Research ) ( Academics ) ( Allied Activities & Student Support )

Research Head - Pedagogy & Digital Director - TLLL Chief Manage - HR Centres learning Initiatives Cell Director - TC Chief Manager - ICT Head - Faculty and Academic Director - Student Affairs Manager - Finance & Accounts Leadership Development Cell Director - ALC Manager - Purchase & Stores Director - ICPM Head - RUAS Innovation Centre Manager Facilities Director - Sponsored Research Director - TSLD

Assoc. Dean - UG Assoc. Dean - UG ( UG Programme, Student Affairs, Admissions ) ( UG Programme, Student Affairs, Admissions ) Academic Registrar Assoc. Dean - PG Assoc. Dean - PG ( TLLL, Student Affairs, Admissions ) ( TLLL, Student Affairs, Admissions ) Chief QC & Chief Proctor Dean - FET Academic Register ( Research, TC, ICPM ) Academic Register ( Faculty ) Chief Librarian ( Faculty ) Administrative Register Administrative Register ( Faculty ) ( Faculty ) Deans – FMPS/FBLS Assoc. Dean - UG & PG Assoc. Dean - UG ( UG & PG Programme, TLLL, Student Affairs, ( UG Programme, Student Affairs, Admissions ) ( Research, TC, ICPM ) Admissions ) Assoc. Dean - PG Dean - FAD Academic Register ( TLLL, Student Affairs, Admissions ) ( Research, TC, ICPM ) ( Faculty ) Academic Register Administrative Register ( Faculty ) Dean – FDS ( Faculty ) Administrative Register ( Research, TC, ICPM ) Assoc. Dean - UG & PG ( Faculty ) ( UG & PG Programme, TLLL, Student Affairs, Admissions ) Assoc. Dean - UG Dean - FMC Academic Register ( UG Programme, Student Affairs, Admissions ) ( Research, TC, ICPM ) ( Faculty ) Assoc. Dean - PG Administrative Register ( TLLL, Student Affairs, Admissions ) ( Faculty ) Academic Register Academic Register ( Faculty ) Dean - FHMCT Dean - FPH ( Faculty ) Administrative Register ( Research, TC, ICPM ) ( Research, TC, ICPM ) Administrative Register ( Faculty ) ( Faculty ) 2626 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences University Officers

Dr. M.R. Jayaram Chancellor

Prof. S.R. Shankapal Vice- Chancellor

Prof. Govinda Kadambi N.C. Shekar Dr. K. Pushpanjali Pro-Vice-Chancellor Registrar/CFO Academic Registrar 27 © Ramaiah University of Applied Sciences Application

Input Process Output Placement - Employment Industry, Business, Government, Research, Teaching/ Education For UG Academic Process Teaching & learning Graduates Pre University Education Practical work/Field work/ Higher Education - India / or Technical skills Abroad Equivalent Seminars Internships (Industry/ Abroad) Applications Entrepreneurship Technical Diploma for Project work Unsuccessful Lateral Entry Visit to industries Guest Lectures Candidates Self - Employment Assessment - Term Test Assignments, Examinations For PG Degree in Respective Family Business Subject Area Supplementary Processes Opportunities for Make Up Social Leadership Sports & Athletics For Ph.D Cultural Activities Masters Degree in Respective Technical Competitions Subject Area Technical Exhibitions Excursions Complementary Process Prestigious Lectures • Global Educational Practices Community Services • Learner Centric Education • Commitment to All- round Development of Students Complementary Process • Commitment to new knowledge Creation and Transferable skills & Dissemination Leadership Development • Community Service and Ethical values Training Placement Support Career Advice & Guidance for Higher Education Guidance and Support for Entrepreneurship 28 © Ramaiah University of Applied Sciences Faculties

S. No Faculties Deans Associate Deans Faculty Registrars 1 Engineering and Dr. Arulanantham Dr. Hariharan R Prof. Ashok Meti Technology Dr. Indira M S Dr. B.S. Dayananda 2 Art and Design Mr. H.S. Lohith --- Archana Patil

3 Management and Dr. H.S. Srivatsa --- Prof. H.N. Nagesh Commerce 4 Mathematical and Dr. Deepak A.S. Dr. T. Niranjan Prabhu Physical Sciences 5 Dental Science Dr. B.V. Sreenivas Dr. Latha Anandkrishna Dr. Lavanya R. Murthy Dr. Silju Mathew 6 Pharmacy Dr. V. Madhavan Dr. S. Bharath Prof. M. Narayana Dr. Anita Murali Babu 7 Hospitality and Prof. Abby Mathew Prof. Neena Joshi Ms. Rashmi Koppar Catering Technology 8 Biological and Life Dr. Pushpanjali K. ---- Dr. A. C. Lokesh Sciences

29 © Ramaiah University of Applied Sciences Departments

S. No Faculty Department Head of Department Associate Head 1 FET Automotive and Aeronautical Dr. R. Raja Dr. S. Srikari Engineering 2 Civil Engineering Dr. H. M. Rajashekar Dr. T. Valsa Ipe Swamy 3 Computer Science and Engineering Dr. Ragavendra Prof. N.D. Venkatesh Kulkarni Gangadhar 4 Electrical and Electronic Dr. K. Manikavasagam Dr. Sanjeev K. Engineering Nayak 5 Electronic and Communication Dr. Hariharan Ramasangu Dr. S. Malathi Engineering 6 Mechanical and Manufacturing Dr. T.N. Srikantha Dath Dr. N.C. Mahendra Engineering Babu 7 FAD Industrial Product Design Mr. H.S. Lohith Mr. Srinivasa 8 Fashion Design Dr. Mamatha Hegde Mrs. Nagaveni K.

30 © Ramaiah University of Applied Sciences Departments

S. No Faculty Department Head of Department Associate Head 9 FMC Management Dr. Chandrasen Mazumdar 10 Human Resources Ms. Geetanjali Pawar Management 11 Marketing Managment Dr. G. Devakumar 12 Finance Dr. N. Suresh 13 Commerce and Mr. Rakesh C. Accounting 14 Hospital Administration Dr. D. Shalini 15 FMPS Physics Dr. Vikas M. Shelar Dr. M. Suguna 16 Chemistry Dr. T. Niranjan Prabhu Dr. Sunil Kumar Y.C. 17 Mathematics Dr. Deepak A S Dr. Mahesh Narayana 18 FBLS Biotechnology Dr. Soma chaki 19 Food Technology Dr. A.C. Lokesh 20 Healthcare Technology Dr. Sudha Suresh

31 © Ramaiah University of Applied Sciences Departments S. No Faculty Department Head of Department 21 FDS Oral Medicine & Radiology Dr. Sujatha S. 22 Periodontics Dr. Ashwini S. 23 Oral and Maxillofacial Surgery Dr. Kavitha Prasad 24 Conservative Dentistry and Endodontics Dr. Sylvia Mathew 25 Orthodontics Dr. Silju Mathew 26 Oral Pathology and Microbiology Dr. Roopa S. Rao 27 Public Health Dentistry Dr. Pushpanjali K. 28 Pedodontics and Preventive Dentistry Dr. Latha Anandkrishna 29 Prosthodontics Dr. S. Suma 30 FPH Pharmacognosy Prof. V. Madhavan 31 Pharmaceutical Chemistry Prof. CHS Venkataramana 32 Pharmaceutics Dr. S. Bharath 33 Pharmacology Dr. Anita Murali 34 Pharmacy Practice Dr. E. Maheshwari

32 © Ramaiah University of Applied Sciences Departments

S. No Faculty Department Head of Department 35 FHMCT Food and Beverage Production Nagarekha C Palli 36 Food and Beverage Service Priya Arjun 37 Management Studies-Hospitality Dr. Prasanna Kumar J P 38 Front Office Shirin Kariappa 39 House Keeping Sandhya Anil Kumar

33 © Ramaiah University of Applied Sciences Research Division and Research Centres Research Division Prof. Govind R. Kadambi-PVC, Research Dr. S. Srikari - Associate Dean Research Dr. Rakesh N. - Associate Dean Research S. No. Research Centre Head

1 Automotive Technologies Research Centre Dr. Raja R. 2 Centre for Aeronautical and Micro Air Vehicles Research Prof. H. K. Narahari 3 Energy and Power Systems Research Centre Dr. Arulanantham 4 Dr. B.S. Dayananda Sanitation, Waste Management and Environmental Dr. Harshad Rameshwar Engineering Research Centre Parate 5 Centre for Machine Learning and Computational Dr. R. Hariharan Intelligence 6 Centre for Control Systems and Robotics Research Dr. Rinki Sharma

7 Dr. Preetham Shankapal Centre for Biomedical Systems and 3D Printing Research Dr. T. Christy Bobby 8 Centre for Signal Processing and Communication Systems Dr. B.R. Karthikeyan Research 34 © Ramaiah University of Applied Sciences Research Division and Research Centres Research Division Prof. Govind R. Kadambi-PVC, Research Dr. S. Srikari -Associate Dean Research Dr. Rakesh N.-Associate Dean Research S. No. Research Centre Head 9 Structural Design and Analysis Centre Dr. B.V. Vijay 10 Composite Materials and Technologies Research Centre Dr. Rahul M. Cadambi Research Centre for Contemporary Tools and Techniques 11 Mr. H.S. Lohith in Industrial Design

12 Innovation and Entrepreneurship Development Research Dr. G. Devakumar Centre

13 Photonics Research Centre Dr. S. Malathi

14 Centre for Batteries and Biofuel Research Dr. A.C. Lokesh

15 Software Engineering and Big Data Modelling Research Dr. P.V.R. Murthy Centre Dr. A.S. Deepak

16 Nutraceutical and Nutrition Research Centre Mrs. Priya Arjun 35 © Ramaiah University of Applied Sciences Research Division and Research Centres

Research Division Prof. Govind R. Kadambi-PVC, Research Dr. S. Srikari -Associate Dean Research Dr. Rakesh N.-Associate Dean Research S. No. Research Centre Head 17 Oral Cancer Research Centre Dr. Roopa S. Rao Dr. S. Srikari 18 Biomaterials Research Centre Dr. Harshitha Gowda Dental and Maxillofacial Modelling and Simulation 19 Dr. Rakesh N. Centre 20 Drug Design and Development Centre Dr. R. Deveswaran

21 Pharmacological Modelling and Simulation Centre Dr. G.R. Saraswathy

36 © Ramaiah University of Applied Sciences Collaborative Centre • Garment Design and Manufacturing Centre – Collaboration with Dept. Handloom and Textiles, GoK • Ramaiah Innovation Centre in Healthcare Technologies (RICH-Tech) • Collaboration with MSR Hospitals • Engineering Centre for Composite Technologies • Collaboration with KNRTU –Russia and VAT-Bangalore • Karnataka Aerospace Technology Centre • Collaboration with Dept. of Industries and Commerce, GoK • Automotive Design and Development Projects – Collaboration with Faurecia, Bangalore • R & D Centre for Hardened Steel Machining: Dr. Suresh, S. Dath, K N Ganapathy – Karnataka Council for Technology Upgradation, Dept. of Industry, GoK • R & D Centre for Automated Farm Machinery Design and Development for Small Farmers: Dr. Mahendra Babu, Dr. A C Lokesh – Karnataka Council for Technology Upgradation, Dept. of Industry, GoK • R & D Centre for Composite Materials and Technologies: Dr. Rahul Kadambi, Mr. Harsha Patil – Karnataka Council for Technology Upgradation, Dept. of Industry, GoK 37 © Ramaiah University of Applied Sciences Directorates

S. No Directorate Director Associate/Deputy 1 Admissions Dr. Prasanna Kumar J. P. --- 2 Student Affairs Mr. Arup Bhattacharya Manjunath Nayak 3 Transferable Skills and Mr. Jyothi Shankar --- Leadership Development 4 Sponsored Research Dr. Sharath Kumar ---- 5 ICPM VC --- 6 TLLL Mr. Arup Bhattacharya Mr. Narasimha Murthy 7 Techno Centre Mr. Madan J. ---- 8 Dental Hospital Dr. Prakash Chandra Shetty ----- 9 Public Relations, Press and Mr. Gautham U.G. ----- Publicity (PPP)

38 © Ramaiah University of Applied Sciences Centres and Cells S. Centres/Cells Chief/Head AssociateHead/s No 1 Quality Assurance Cell S. Parmeshwar -

2 Pedagogy and Digital Initiatives Cell Ms. Jayanathi Chatterjee Shruthi H.J.

3 Faculty and Academic Leadership Development Cell Dr. Sandhya Iya Dr. Hema Seshan

4 RUAS Innovation Centre Dr. Narendra Babu C 10 members

5 Technology Business Incubation and Entrepreneurship Mr. Madan J - Development Cell 6 Social Media Cell Mr. Pavan Yadav Ms. Rashmi Verma

7 University Secretariat Ms.Madhu B K -

8 University Data Centre Mr. Goutham Nagaraj -

9 ICT-Department Mr. Nagesh T.R. -

10 HR -Department Mr. Arup Bhattacharaya Ms. Anuradha

11 Library Mr. Ravichandran S -

12 Sports Mr. Kumar G M -

13 Alumni Association Mr. Arup Bhattacharya -

39 © Ramaiah University of Applied Sciences Ramaiah Technology Business Incubator (RTBI) • Ramaiah Technology Business Incubator (RTBI) is formed – Ramaiah –GoK Technology Business Incubator is being Established – Amount of Grant Sanctioned by GoK (IT, BT, ST, now Innovation and Technology Department): Rs. 6 Crores , 2.1 crore received – We are planning to inaugurate Shortly • The Incubator is Supporting MSME-GoI in Technology Business Incubation Activities since 2003. So far 15 Ideas have been supported • DST-TIFAC is supporting students internship activity through product development in association with MSME

40 © Ramaiah University of Applied Sciences Digital Campus- Student Life Cycle Management

ADMISSIONS ACADEMICS • Programme Details • Course/Module Specifications • Eligibility Criteria • Course/Module Registration at the start of the • Fees semester/ year • Schedules • Time Table Generation • On-line enquiry system Admissions • Marking of Attendance and viewing of total integrated with i-portal attendance percentage of each • Student Database (Pogramme / Academics course/module category wise) from i-portal • Course / Module Notes/ Assignment Questions made available on dash board of STUDENT ADMIN SERVICES student • Entry of Scores/Marks Library Available on web: • Libsoft-OPAC: entry, issue, • Academic Regulations return, renewals, fines, request • Programme Specifications for new books, journals, booking • e-Notice Board request, status report . Digital Campus • Alumni • Database of available books, journals, dailies, magazines, e- EXAM MANGEMENT journals…  Generation of Eligibility List with details of penalty (if applicable) Finance and Accounts:

 Examination Registration Services • Programme Fees (Tuition Fees, Admin Student  Hall Ticket Generation Caution Deposit) Exam  SAB/PAB (Progression/Result Analysis) • Hostel Fees Management  Grade Card/Marks Card • Exam Fees, Resit, Re-  Course Completion Certificate Registration, Fast Track,  Provisional Degree Certificate (PDC) penalties  Degree Certificate

41 © Ramaiah University of Applied Sciences Digital Campus

Admissions Academics Exam Management Student Admin Services

Available on web/i-portal: Available on i-portal: Available on i-portal: Library • Programme Details • Course/Module Specifications • Generation of Available: • Eligibility Criteria • Course/Module Registration at Eligibility List with • LibSoft (OPAC): entry, issue, • Fees the start of the semester/ year details of penalty (if return, renewals, fines, status • Schedules • Time Table Generation applicable) report ... • On-line enquiry system • Marking of Attendance and • Examination • Database of available books, integrated with i-portal viewing of total attendance Registration journals, dailies, magazines, e- • On-line Application form percentage of each • Hall Ticket Generation journals… filling course/module • SAB/PAB Future Requirement: • Live Chat option for • Course / Module Notes / (Progression/Result Request for new books, journals, admission queries Assignment Questions made Analysis) booking request, to be done using • Student Database available on dash board of student • Grade Card/Marks i-portal login (Programme / Category- • Entry of Scores/Marks Card wise list) from i-portal • Student Progress Report • Course Completion Finance and Accounts: • Student –ID Card Alumni Database and related Certificate • Programme Fees (Tuition Fees, generation with bar code operations available on separate • Provisional Degree Caution Deposit) alumni software employed by the Certificate (PDC) • Hostel Fees Future Requirement: University • Degree Certificate • Exam Fees, Resit, Re- • Registration to be made Available on web: Registration, Fast Track, penalties on-line integrated to • Academic Regulations Future Requirement: (Fee payments partly digitized): i-portal for report • Programme Specifications • Exam Planning Present Payment Status: 5 % by generations • e-Notice Board (Scheduling, Resource Cash, 30% by DD, 30% by on-line Future Requirement: Allocation) transfer, 35% by Debit/Credit Cards • Course/Module Grade Result • Migration Certificate Cafeteria/Hostel-Mess: Card announcement at individual • Transfer Certificate swiping and PayTM option available student level login

42 © Ramaiah University of Applied Sciences Smart and Clean Campus Objective What is Implemented

Waste management: Collection, transportation, and • Collection, transportation & dispose of general disposal of garbage and other waste products. Treating & waste. recycling. • Composting of garden waste.

Water Management: Planning, developing, distributing • Sensors to avoid water overflow. and optimum use of water under defined water polices • RO drinking water facility. and regulations. • In house team for quick maintenance. • Regular cleaning of water storage tanks.

Sewage Management: Removal of major contaminants • Sewage treatment plant installed. from waste-water or sewage and produce both liquid & • Recycled water is used for toilet flushing and solid effluent which can be reused. landscaping. • Sludge is dried & converted into manure.

Power Management: Planning and effective utilization of • Auto sleep / shutdown for most of the equipment. Power. Plan for renewable energy • Solar Power Generation. • Tracking electrical usage bysub-metering.

Security Management: Security management • Video Surveillance & storage. encompasses everything from the supervision of security • Asset Tracking. guards to the installation of high-tech security • Biometric attendance system. management systems designed to protect an • Fire detection and alarm (In selected location). organization's asset. ICT Management: Management of system data storage, • Teaching with technology. including the operation of routine data backup, archiving • Wi Fi and internet facility. and deletion routines. User requests to recover data • Secure based data storage and access. from backup or archive stores, and action taken. • Virtual private campus network. Maintenance of appropriate software. Licenses for live ICT systems. Green Campus Initiatives: • Rain water harvesting unit has to be initiated utilizing To tackle the challenges of climate change and the existing rain water collection sump environmental sustainability through innovative • 150 rose and 150 golden palms plants are being academic research, translating that into actions on planted campus and beyond

43 © Ramaiah University of Applied Sciences University Buildings

University House FDS-Block

FPH -Block FHMCT -Block

44 © Ramaiah University of Applied Sciences University Buildings

CV Raman and Aryabhata Blocks Sarvepalli Radhakrishnan and APJ Abdul Kalam Blocks

Viswakarma Block Visveswaraya Block Vivekananda Block 45 © Ramaiah University of Applied Sciences University Goals-2020

• Ranked as one of the top 10 universities of India • Target a total of 10000 students by 2020 • Maintain a Staff Student Ratio of 1:15 • At least 60% members of faculty are Ph.D. qualified • At least 80% of graduates are recruited for jobs on campus, with at least 50% of them in tier-1 organisations; 10% of graduates should seek higher education in world renowned universities; 5% students take-up entrepreneurial route and another 5% students should take up social leadership and bureaucracy • Organise to have at least 3% foreign students on Campus • Confer PhD on an average of 100 PhDs Scholars per year • Support at least 30 PhD Scholars per year with Scholarship • Achieve a publication rate of 2.5 per faculty member in Scopus/Web of Science indexed journals • Achieve a citation index of at least 3.0 per publication • Organise at least one international conference annually • Organise 12 seminars/workshops per year • Target an annual sponsored research grant of at least ₹ 500 lakh • Achieve an annual patent filing of 40 • Train at least 500 candidates on various skill and vocational programmes annually • Provide incubation support to at least 10 incubatees annually • Target a revenue of at least Rs.500 lakhs through industrial consultancy, product development and product commercialisation activities • Commercialise at least one product per year or promote one start up per year 46 © Ramaiah University of Applied Sciences Facts and Figures

Faculties 08 Total Number of Publications 2432+ Directorates 09 Total Number of Patents Filed 102 UG Programmes Offered 19 Total Number of Patents Granted 14 PG Programmes Offered 55 Total Number of Sponsored Research 121+ Projects Number of Research Centres 21 Number of Consultancy Projects 556+ Executed Number of UG Students on Roll 3075 Number of Delegated Trained 36824 Number of PG Students on Roll 838 Number of Foreign University 15 Collaborations Number of PhD Scholars on Roll 224 Industries Interaction 330+

47 © Ramaiah University of Applied Sciences 2. Academic Programmes and Curriculum

48 © Ramaiah University of Applied Sciences Academic Programmes offered (2018-19)

49 © Ramaiah University of Applied Sciences Outcome Based Education-Feed Back Model

Curriculum Development-Programme, Programme Goal, Programme Objectives, Job Role Requirements 1. Knowledge & Understanding Programme Outcomes in terms of Learning Outcomes Knowledge& Understanding, Cognitive 2. Cognitive Abilities-Critical, abilities and Skills and Courses to be studied Analytical, Problem Solving Skills Courses, Course Outcomes, Course Syllabus, 3. Practical Skills Teaching methods and Assessment, Grading 4. Transferable (Life) Skills of students, Quality Assessment

Learning Domains and Assessment Outcome based & Corporate Job Roles Learner Centric

Design methods to assess learning achieved in each learning domain involving learner Graduates with Problem Sectors Co-Curricular & Extra Curricular Activities Solving Competencies in Agriculture, Manufacturing, Technical Competitions the Chosen Domain Prestigious Lecture Construction, Health, Electronics and Transferable Skills and Leadership IT, Textiles, Pharma, Chemicals and Development Fertilisers, Trade and Commerce, Sports and Athletics Hospitality, Education, Transport, Real Cultural Activities Estate, Government Community Services , etc. Excursions 50 © Ramaiah University of Applied Sciences Choice Based Credit System (CBCS) • All courses at RUAS have credits • 1 credit (Theory) = 15 contact hours • 1 credit (Practical) = 30 contact hours • A student is expected to complete approximately 25 credits per semester or 50 credits per year, i.e., 1200 hours of interaction per year • Students can choose professional and Open Electives • All UG Courses follow Semester Scheme CBCS-Choice Based Credit System • All PG courses Follow Modular Scheme • 4 year UG programme – 200 credits • 2 year PG Programme- 100 credits 51 © Ramaiah University of Applied Sciences RUAS Advantages • Choice Based Credit System Example: B. Tech. Mechanical • Global Education Practices Programme (Revised-2018-19) • Learner Centric, Outcome Based Education • Emphasis on Applied Learning • A few credits can be completed Using MOOCs – Training for Lifelong Learning • Research Training Through Projects and Dissertations • Opportunities to do a minor to pursue second passion List of Minors

• Open elective to enlarge your horizon List of Open • Significant Training on Life Skills development Electives • World Class Learning Facilities • Internship, Training, Placement Support • Opportunities for Study Abroad • Opportunities for semester abroad or year abroad • Opportunities for Technology Incubation and Entrepreneurship Development

52 © Ramaiah University of Applied Sciences Purpose of Higher Education

– It is all about creating Global Citizens

Vs

53 © Ramaiah University of Applied Sciences Why Global Citizenship Needed?

We are connected Globally

• Socially and culturally through media, telecommunications, travel and migration • Economically through trade • Environmentally through sharing one planet • Politically through international relations and systems of regulation

54 © Ramaiah University of Applied Sciences Competencies of a Global Citizen

• Discipline knowledge • Critical thinking competence • Interpersonal competence • Intercultural awareness • Social/Societal engagement, or active participation at a local level and at a global level • Communication skills

55 © Ramaiah University of Applied Sciences 3. Curriculum Development

56 © Ramaiah University of Applied Sciences Philosophy for Curriculum Development

Reflected

Sample Curriculum(PS)-1 Sample Curriculum(CS)-2 57 © Ramaiah University of Applied Sciences Curriculum Development Process

Programme Goal

Programme Objectives

Programme Outcomes

Knowledge and Transferable Skills Cognitive Abilities Practical Skills Understanding (Attitudinal)

Programme Learning Outcome

Course Course Course Course Learning Learning Learning Learning Outcomes Outcomes Outcomes Outcomes

Class Learning Class Learning Class Learning Outcomes Outcomes Outcomes 58 ©M. S. Ramaiah University of Applied Sciences Programme Development and Implementation

Faculty Subject Board of Academic BoM Initiation- BoM Deans Deans Groups Studies Council & BoG

Curriculum Approval by BoM Initiates Deans are asked Development by Academic BoM and BoG programme to discuss with subject groups Council Review by Board Approvals and ideas based on subject groups as per University & Approval from of Studies back to Deans for Market and finalize the Formats issued Government & implementation Requirements programmes by Academic Statutory Bodies Registrar if needed

59 ©M. S. Ramaiah University of Applied Sciences Typical Programme Structure

B. Tech. Programme M. Tech. Programme

Total Credits: 200 Total Credits: 100

60 © Ramaiah University of Applied Sciences Regulations and Curriculum

Programme Academic Programme Course Regulations Specifications (PS) Specifications (CS) 1. B. Tech. Aerospace Academic PS_ASE CS_ASE Engineering Regulations 2. B. Tech. Automotive PS_AUE CS_AUE Engineering 3. B.Tech. , Civil Engineering PS_CE CS_CE 4. B.Tech. , Computer Science and PS_CSE CS_CSE Engineering 5. B.Tech., Electrical PS_EEE CS_EEE and Electronic Engineering 6. B.Tech., Electronics PS_ECE CS_ECE and Communication Engineering 7. B.Tech., Mechanical Engineering PS_ME CS_ME

61 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Module Specifications (PS) Specifications (MS) M. Tech., in 1. Aircraft Design PS_ACD MS_ACD 2. Automotive Engineering PS_AE MS_AE 3. Automotive Product Design Academic PS_APD MS_APD 4. Automotive Regulations Powertrain Design PS_APTD MS_APTD 5. Turbomachinery Design PS_TMD MS_TMD 6. Advanced Machinery Design PS_AMD MS_AMD 7. Advanced Manufacturing PS_AMT MS_AMT Technologies 8. Engineering and PS_EMM MS_EMM Manufacturing Management 62 © Ramaiah University of Applied Sciences Regulations and Curriculum

Programme Regulations Programme Module Specifications (PS) Specifications (MS) M. Tech., in 9. Civil Structural PS_CS MS_CS Design 10. Construction PS_CE MS_CE Engineering and Academic Management Regulations PS_EM MS_EM 11. Electrical Machinery Design PS_SC MS_SC 12. Sensors and Control Systems Engineering 13. Biomedical PS_BM MS_BM Engineering 14. Electronics System PS_ES MS_ES Design Engineering 15. Digital Signal and PS_DS MS_DS Image Processing

63 © Ramaiah University of Applied Sciences Regulations and Curriculum

Programme Regulations Programme Module Specifications (PS) Specifications (MS) M. Tech. in 16. Signal Processing PS_SP MS_SP and Communication Technologies Academic 17. VLSI-System Regulations PS_VL MS_VL Design 18. Computer Science PS_CS MS_CS and Networking 19. Real Time PS_RT MS_RT Embedded Systems 20. Automotive PS_AL MS_AL Electronics

64 © Ramaiah University of Applied Sciences Regulations and Curriculum

Programme Regulations Programme Module Specifications (PS) Specifications (MS) M. Tech. in 21. Robotic PS-RE CS-RE Engineering 22. Machine Learning PS-ML CS-ML and Intelligent Systems 23. Transportation PS-TS CS-TS System 24. Sanitation Engineering and PS-SW CS-SW Waste Management

65 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Course/Module Specifications (PS) Specifications (CS/MS) B. Des., in Product Design Academic PS_PD CS_PD B. Des., Fashion Design Regulations PS_FD CS_FD M. Des. , in Product Academic PS_PD MS_PD Design Regulations BBA Academic PS_BBA CS_BBA Regulations MBA in 1. Marketing PS_MM MS_MM Management 2. Human Resources Academic PS_HR MS_HR Management Regulations 3. Financial PS_FM MS_FM Management 4. Operations PS_OP MS_OP Management 5. Small Business and PS_SB MS_SB Entrepreneurship 6. Innovation & Academic Entrepreneurship Regulations PS-IE MS-IE 66 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Module Specifications (PS) Specifications (MS) MHA Academic PS_HA MS_HA Regulations B. Com., (Hons) – Academic PS_ACF CS_ACF Accounting and Finance Regulations M. Com., in Academic PS_AT MS_AT Accounting and Taxation Regulations PS_BF MS_BF Banking and Finance B.Sc.,(Hons) - PCMS Academic PS_PCMS CS_PCMS Regulations M.Sc., in 1. Applied Solid State PS_AS MS_AS Physics 2. Optoelectronics Academic PS_OP MS_OP 3. Nuclear Physics and Regulations PS_NP MS_NP Technology 4. Analytical Chemistry PS_AC MS_AC 5. Industrial Chemistry PS_IC MS_IC 6. Medicinal Chemistry PS_MC MS_MC 7. Applied Mathematics PS_AM MS_AM 67 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Course/Module Specifications (PS) Specifications (CS/MS) BDS Academic PS_DS CS_DS Regulations MDS in 1. Oral Medicine and PS_OM MS_OM Radiology 2. Periodontics Academic PS_PD MS_PD 3. Oral and Maxillofacial Regulations PS_OS MS_OS Surgery 4. Conservative Dentistry PS_CD MS_CD and Endodontics 5. Orthodontics and PS_OD MS_OD Dentofacial Orthopaedics 6. Oral Pathology and PS_OP MS_OP Microbiology

68 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Course/Module Specifications (PS) Specifications (CS/MS) 7. Public Health Dentistry PS_PH MS_PH 8. Pedodonticsand PS_PP MS_PP Preventive Dentistry 9. Prosthodontics PS_PS MS_PS including and Bridge B. Pharm. Academic PS_BP CS_BP Regulations Pharm. D. Academic PS_PD CS_PD Regulations M. Pharm., in 1. Pharmacognosy Academic PS_PG MS_PG 2. Pharmaceutical Regulations PS_PC MS_PC Chemistry 3. Pharmaceutics PS_PS MS_PS 4. Pharmacology PS_PC MS_PC 5. Pharmacy Practice Academic PS-PP MS-PP 6. MBA in PBM Regulations PS-PBM MS-PBM 69 © Ramaiah University of Applied Sciences Regulations and Curriculum Programme Regulations Programme Course/Module Specifications (PS) Specifications (CS/MS) B.H.M. Academic PS_BH CS_BH Regulations MBA (HM) Academic PS_HM MS_HM Regulations Faculty of Biological and Life Sciences B.Sc.,(Hons) – Food Academic PS_FTFP CS_FTFP Technology and Food Regulations Processing

B.Sc.,(Hons) – Biotechnology Academic PS_BT CS_BT Regulations

70 © Ramaiah University of Applied Sciences 4. Admissions

71 © Ramaiah University of Applied Sciences Programmes –Admission –UG Programmes S. No. Faculty Programme KEA University 1 FET 1. B. Tech., Aerospace Engineering 40% 60% 2. B. Tech., Automotive Engineering 3. B. Tech. , Civil Engineering 4. B.Tech. , Computer Science and Engineering 5. B.Tech., Electrical and Electronic Engineering 6. B.Tech., Electronic and Communication Engineering 7. B.Tech., Mechanical Engineering 2 FAD 1. B. Des., Product Design 0 100% 2. B. Des., Fashion Design 3 FDS 1. Bachelor of Dental Surgery (BDS) 100% 0 4 FPH 1. Bachelor of Pharmacy (B. Pharm.) 50% 50% 2. Doctor of Pharmacy (Pharm. D.) 50% 50% 5 FHMCT 1. Bachelor of Hotel Management (BHM) 0 100% 6 FMPS 1. B.Sc. (Honours)-PCMS 0 100% 7 FBLS 1. B.Sc. (Honours)- Biotechnology 0 100% 2. B.Sc. (Honours)- Food Technology and Food Processing 3. B.Sc. (Honours)- Healthcare Technology 8 FMC 1. B. Com. (Honours) 0 100% 2. BBA 72 © Ramaiah University of Applied Sciences Programmes –Admission –PG Programmes S. No. Faculty Programme KEA University 1 FET 1. Automotive Engineering 40% 60% 2. Automotive Product Design 3. Automotive Powertrain Design 4. Turbomachinery Design 5. Aircraft Design 6. Advanced Machinery Design 7. Advanced Manufacturing Technologies 8. Engineering and Manufacturing Management 9. Civil Structural Design 10. Construction Engineering and Management 11. Electrical Machinery Design 12. Sensors and Control Systems Engineering 13. Biomedical Engineering 14. Electronics System Design Engineering 15. Digital Signal and Image Processing 16. Signal Processing and Communication Technologies 17. VLSI-System Design 18. Computer Science and Networking 19. Real Time Embedded Systems 20. Automotive Electronics 21. Robotic Engineering 22. Machine Learning and Intelligent System 23. Transportation Engineering 24. Sanitation Engineering and Waste Managment 73 © Ramaiah University of Applied Sciences Programmes –Admission –PG Programmes S. No. Faculty Programme KEA University 2 FAD 1. Product Design 0 100%

3 FMC 1. MBA 40% 60%

2. MHA 0 100% 3. M. Com. 0 100% 4 FSH 1. M.Sc., Physics 0 100% 2. M.Sc., Chemistry 3. M.Sc., Mathematics 5 FHMCT 1. MBA in Hospitality Management 0 100%

6 FDS MDS in 100% 0 1. Oral Medicine and Radiology 2. Periodontology 3. Oral and Maxillofacial Surgery 4. Conservative Dentistry and Endodontics 5. Orthodontics and Dentofacial Orthopaedics 6. Oral Pathology and Microbiology 7. Public Health Dentistry 8. Pedodontics and Preventive Dentistry 9. Prosthodontics including Crown and Bridge

74 © Ramaiah University of Applied Sciences Programmes –Admission –PG Programmes

S. No. Faculty Programme KEA-RGUHS University 7 FPH 1. Pharmacognosy 50% 50% 2. Pharmaceutics 3. Pharmacology 4. Pharmaceutical Quality Assurance 5. Pharmacy Practice 6. MBA-Pharma Business Management 0 100%

Number of UG and PG programmes offered: 19+ 47 =66

Entrance Examinations: CET, PGCET, NEET Uni-Gauge, ComedK, CET, Any State CETs Direct Admissions

75 © Ramaiah University of Applied Sciences Student Numbers - Year Wise 2014-15 2015-16 2016-17 2017-18 SI/AI SI/AI SI/AI SI/AI B. Tech. 300 153 300 211 450 439 690 660 B.Tech (Lateral) 0 137 139 68 B. Des. 120 17 120 32 120 44 120 64 BDS 60 60 60 60 60 55 60 60 B. Pharm. 60 60 60 56 60 60 100 66 Pharm. D. 30 30 30 30 30 30 30 30 BHM 90 90 120 120 150 149 150 128 M. Tech. 420 212 420 176 492 167 492 220 M. Des. 24 8 24 7 24 7 24 9 MBA 120 78 120 92 120 109 120 110 MHA 20 20 30 26 30 16 30 25 M. Com. 30 5 30 9 30 11 30 11 M. Sc. 90 9 90 13 90 39 90 23 MDS - - 40 40 40 40 40 32 M. Pharm. 69 26 69 11 69 10 69 25 Total 1433 768 1513 1020 1765 1315 2045 1531 76 © Ramaiah University of Applied Sciences Student Numbers-On Roll (as on August 2017)

2014-15 2015-16 2016-17 2017-18 Total (On rolls) B. Tech. 153 211 439 660 1463 B.Tech (Lateral) 137 139 68 344 B. Des. 17 32 44 64 157 BDS 60 60 55 60 235 B. Pharm. 60 56 60 66 242 Pharm. D. 30 30 30 30 120 BHM 90 120 149 128 487 M. Tech. 212 176 167 220 387 M. Des. 8 7 7 9 16 MBA 78 92 109 110 219 MHA 20 26 16 25 41 M. Com. 5 9 11 11 22 M. Sc. 9 13 39 23 62 MDS - 40 40 32 112 M. Pharm. 26 11 10 25 35 Total 768 1020 1315 1531 3942 77 © Ramaiah University of Applied Sciences Number of Students Graduated 2014-15 2015-16 2016-17 2017-18 B. Tech. ------B. Des. ------BDS ------B. Pharm. ------Pharm. D. ------BHM ------M. Tech. -- -- 150 143 M. Des. -- -- 08 07 MBA -- -- 53 80 MHA -- -- 18 19 M. Com. -- -- 5 09 M. Sc. -- -- 3 05 MDS -- -- NA NA M. Pharm. -- -- 20 09 Total -- -- 257 272 78 © Ramaiah University of Applied Sciences 5. Teaching and Learning Resources

79 © Ramaiah University of Applied Sciences Teaching and Research Staff

Associate Assistant No. of Faculty Professors Tutors Total Professors Professors Ph.Ds

FET 17 22 93 16 148 43 FAD 1 0 14 4 19 1 FMC 2 10 15 0 27 7 FSH 4 0 26 3 33 28 FDS 22 24 16 13 75 3 FPH 8 3 31 1 43 22 FHMCT 3 4 16 2 25 2 Total 57 63 211 39 370 106

Adjunct Professors (with Ph.D): 09

80 © Ramaiah University of Applied Sciences Staff-Student Ratio

Total Number Total Number of Faculty/Student of Students Faculty Ratio FET 2194 148+22 12.90 FAD 173 19 9.10 FMC 282 27 10.44 FMPS 62 33 (22+11) 5.64 FDS 347 75 4.63 FPH 397 43 9.23 FHMCT 487 25 19.48 Overall Ratio 3942 370 10.65

81 © Ramaiah University of Applied Sciences Administrative and Technical Staff

Faculty Administrative Staff Technical Staff Total

FET 60 35 95 FAD 2 0 2 FMC 4 0 4 FSH 3 0 3 FDS 46 19 65 FPH 17 04 21 FHMCT 10 1 11 UO 82 28 110 Total 224 87 311

Contractual Staff: 150

82 © Ramaiah University of Applied Sciences Learning Resources Faculty Classrooms Laboratories Library Workshops Studios (Seminar Halls) Print Book Titles: 7804 E-Books: 386 Book Volumes: 12439 Yes (Fitting, Carpentry, E Journals: IEEE Explore: Sheet Metal, FET 51 43 188 Welding, Machine NA Shop, CNC Shop, RPT ASCE: 35 & Foundry & ASME: 29 Forging) Total Journals :252 Magazines:8 Titles: 996 Volumes: 1408 Yes FAD 06 NA NA E Journals: 1 8 studios Magazines:8

83 © Ramaiah University of Applied Sciences Learning Resources Faculty Classrooms Laboratories Library Workshops Studios (Seminar Halls)

Titles: 2042 Volumes: 2770 FMC 10 01 NA NA E Journals: EBSCOHOST Business Source Elite: 1108 Magazines:6 Titles: 898 03 + Labs of Volumes: 1876 FMPS 07 FET are NA NA available Journals: - 6 Magazines:9

Print Books: Titles : 2217 FDS 13 11 Volumes: 12606 1 NA

Journals: 2691

84 © Ramaiah University of Applied Sciences Learning Resources Faculty Classrooms Laboratories Library Workshops Studios (Seminar Halls) FPH 14 23 Titles: 3702 NA NA Volumes: 8443

Journals: - 1988 FHMCT 14 15 Titles- 3690 NA NA Volumes: 8190

Journals: - 16 FBLS 09 06 Being set up NA NA

124 102 Volumes: 47732 2 8 Total Journals: 6062

85 © Ramaiah University of Applied Sciences Learning Resources

All Class Rooms are equipped with Audio visual facilities, Networked and wi-fi enabled

86 © Ramaiah University of Applied Sciences ICT-Facilities S. No. ICT Facilities Quantity 1 Work Stations 29 2 Laptops 95 3 Laboratory Computers 1161 4 Faculty & Admin Computers 845 : All Faculty , Technical and Admin staff are provided computers/Laptops

5 Library Computers 64 Total 2194 6 Printers/Plotters 114 7 Audio Visual Systems 113 8 Wi-Fi/Internet 275 Mbps 9 Telephones Lines 26 Land Lines + 2 PRI Lines 10 Intercom Available 11 Website 100 GB (www.msruas.ac.in) 12 UMS-iportal 100 GB (www.iportal.msruas.ac.in) 13 Webmail 300 GB – Allotted to all Staff and Students

14 CCTV 111 15 Polycom Videoconference Facility 2 sets 87 © Ramaiah University of Applied Sciences Application Software Engineering and Technology- Engineering and Technology- Engineering and Technology- Sl. No. Electrical and Electronics Mechanical and Manufacturing Computer Science and Engineering Engineering 1 ABAQUS STUDENT EDITION ANDROID ADT ADVANCED SYSTEM DESIGN (ADS) 2 ALTAIR HYPERWORKS ANDROID STUDIO ANSYSCODE COMPOSER STUDIO 3 AMESIM APACHE + PHP ARM RVDS 4 ANSYS ARM DS-5 METROWERKS CODE WARRIOR 5 ARENA SIMULATION SOFTWARE BLUESTACK CADENCE 6 AUTODESK SUITE DIA EMPIRE 3D 7 AXSTREAM JAVA TOOL CHAIN EMPRO 3D EM SIMULATION 8 CAMBRIDGE MATERIAL SELECTOR GNU TOOL CHAIN + OPENMP FLASH MAGIC 9 CAPSMILL GREENFOOR IDE KEIL MDK ARM 10 CAPSTRUN HASKELL PLATFORM MADYMO 11 CASTING PROCESS DESIGN LINUX KERNEL MPLAB IDE 12 CATIA-V6 MPLAB IDE NI LABVIEW, NI MULTISIM 13 LS-DYNA MYSQL PSPICE STUDENT EDITION 14 MINITAB NETBEANS IDE TASM 15 MSC ADAMS NS2 & NS3 SIMULATORS XILINX VIVADO 16 MSC NASTRAN / PATRAN PYTHON TOOLS LOGICSIM 17 PREACTOR SAGEMATH PROTEUS 18 QA SIX SIGMA SUITE TEXMAKER EMULATOR 8086 19 RICARDO TOMCAT & GLASSFISH ROBO STUDIO 20 SIMIO APPLICATION SERVERS ANSYS ELECTRONICS – MAXWELL 21 SWANSOFT CNC SIMULATION XENOMAI KERNEL PATCH MATLAB 22 UNIGRAPHICS-NX COMSOL MULTIPHYSICS 23 MACHINE DESIGN ONLINE LUMERICAL LAB SUITE 88 © Ramaiah University of Applied Sciences Application Software Engineering and Technology - Management and Sl. No. Art and Design Civil Engineering Commerce 1 ANSYS AUTODESK SKETCHBOOK PRO MICROSOFT PROJECT 2 AUTODESK SUITE AUTODESK SKETCHBOOK DESIGNER ERP NAVIGATOR STADD PRO - FOUNDATION ADVANCED, GLOBAL AUTODESK AUTOCAD IBM SPSS 3 DESIGN CODE 4 BENTLEY POWER REBAR AUTODESK ALIAS AUTOMOTIVE TALLY 5 RAM CONCEPT AUTODESK MAYA MINITAB STATISTICAL S/W 6 MICROSTATION + POWER DRAFT AUTODESK 3DS MAX IC SOFT 7 BENTLEY NAVIGATOR AUTODESK SHOWCASE PROFESSIONAL RISK POOL AECOSIM - BUILDING DESIGNER, ENERGY AUTODESK MOUNDFLOW INSIGHT TORA 8 SIMULATOR ADVANCED 9 BENTLEY DESCARTES AUTODESK 360 10 BENTLEY MAP ENTERPRISE COREL DRAW SUITE Faculty of Dental Sciences 11 BENTLEY POINTOOLS COREL PAINTER 12 SEWER GEMS PINNACLE STUDIO DOLPHIN IMAGING PREMIUM 13 WATER HYDRAULICS PRODUCTS DFMA VISTA SCAN & PRACTO 14 STORM CAD CBCT 15 CIVIL STORM 3-MATIC 16 HAMMER Faculty of Hospitality Management and 17 BENTLEY - MX ROAD SUITE Catering Technology 18 BENTLEY - POWER CIVIL FOR COUNTRY FORTUNE NEXT 6i PRO 19 BENTLEY - MAX SURF ENTERPRISE ORELL LANGUAGE S/W 20 SACS MARINE ENTERPRISE 21 SACS OFFSHORE STRUCTURE ENTERPRISE 89 © Ramaiah University of Applied Sciences Application Software

Sl. No. Pharmacy PACE Grant General Software

1 Turbo C AUTODESK SKETCHBOOK PRO E SCAN ANTIVIRUS 2 IR Solutions software AUTODESK SKETCHBOOK DESIGNER MICROSOFT OFFICE SUITE 3 Euro Chrome software AUTODESK AUTOCAD MICROSOFT CAMPUS AGREEMENT 4 PCP DISSO V2 – DRUG RELEASE KINETIC STUDIES AUTODESK ALIAS AUTOMOTIVE LIBSOFT - LIBRARY S/W SOFTWARE 5 GRAPH PAD PRISM – VER. 4.0 SOFTWARE AUTODESK MAYA FRONT PAGE 6 CAMAG – HPTLC SYSTEM – SWITZERLAND (THIN LAYER AUTODESK MOLDFLOW INSIGHT UNIVERSITY MGMT. SYSTEM CHROMATOGRAPHY – WINCAT’S SOFTWARE) ADVANCED 7 MICRO IMAGE LITE – OLUMPUS AUTODESK SHOWCASE TALLY MULTI USER PROFESSIONAL 8 BIOVIS – IMAGE CAPTURE SOFTWARE AUTODESK 3DS MAX SARAL PAY PACK 9 NIVIQUE DAS SYSTEM (ECG, BP, TISSUE CONTRACTION AUTODESK 360 ACC PAC – INCREASED USE OF DRUG) 10 EXPHARMA – ANIMAL SIMULATION SOFTWARE LSCT LS DYNA TURNITIN - ANTI PLAGIARISM 11 MICROMEDEX – DRUG INFORMATION SOFTWARE ANSYS ALUMNI MANAGEMENT S/W 12 TOPCAT - DRUG DESIGN - AUXILIARY SOFTWARE MENTOR GRAPHICS TIME ATTENDANCE MGMT TOOL 13 WORDS WORTH ENGLISH LANGAUAGE ALTAIR HYPERMESH 14 SCHRODINGER SUITE

90 © Ramaiah University of Applied Sciences Special Equipment Special Equipment include • Scanning Electron Microscope • Tunnelling Microscope • 3D Printers (ABS and Metal) • ABB Robot • Jet Engine Test Facility • Aircrafts (2) • Trackers and CMMs for Reverse Engineering • Universal Testing Machine with Insitu-Scanner and Camera Facility • High Performance Thin Layer Chromatography (HPTLC) • High Performance Liquid Chromatography (HPLC) • Fourier Transform Infrared Spectrophotometer (FTIR) • U V –Visible Spectrophotometer • Pilot Model – Pharma Products Manufacturing • Cone Beam Computed Tomography (CBCT) • 18000C Furnace • Aircraft grade Composites Manufacturing Facility • Clean Room (10000 grade) • Wind Tunnels-Subsonic and Supersonic • CNC-Turning Centre, Machining Centre and Wirecut EDM 91 © Ramaiah University of Applied Sciences 6. Academic Programme Administration

92 © Ramaiah University of Applied Sciences Academic Administration and Operations

Vice Chancellor

Academic Registrar -University

Academic Registrars- Faculty Deans, Associate Deans, HoDs

Resources Operations

Class Rooms & Teaching and ICT Library Registrations Teaching Aids Learning Announcement Examinations of Results; Laboratories/Workshops/Studios/Clinics/ &Assessments Issuing of Kitchens/ Restaurants Transcripts

QAC 93 © Ramaiah University of Applied Sciences University Secretariat • The responsibilities of this Secretariat are: – Managing all the Academic Records and Data of the University – Corresponding with Academic bodies like UGC, KSHEC and other Regulatory Bodies – Maintaining Student Academic Records – Issuing Student Transcripts – Uploading student academic data to National Academic Depository • Contact: – Madhu B.K., Manager, University Secretariat [email protected] • Programme Operations Documents

( Operations Manual, Students Handbook) 94 © Ramaiah University of Applied Sciences University Data Centre

• The responsibilities of this Centre are – Managing University Management System(UMS) – Managing the data entry into UMS – Processing the academic data and other data as per University Academic Requirements and Templates – Managing University website • Contact Person – Goutham Nagaraj [email protected] • i-portal

95 © Ramaiah University of Applied Sciences 7. Teaching, Learning and Assessment

96 © Ramaiah University of Applied Sciences Learning Domains

• Learning Domains • Mental Skills: Knowledge, Understanding and Cognitive (Application, Analysis, Synthesis, Evaluation) • Psychomotor :Practical Skills • Attitudinal : Transferable skills • Bloom’s Taxonomy • Knowledge, Understanding and Cognitive • Psychomotor :Practical Skills • Attitudinal : Transferable Skills Learning Domains-Knowledge, Understanding and Cognitive Sample –curriculum

97 © Ramaiah University of Applied Sciences Teaching Content

• Every member of the faculty is required to prepare session wise teaching material in power point format • Teaching material is reviewed by a committee consisting of Academic Team and Quality Control Team • Every student is provided with the teaching material in advance to start delivering of the course/Module • A sample format of the Teaching Material is shown – SRS- Control Notes Format – SRS- VDHS Notes Format • All the reviewed course/module notes are uploaded to i-portal for students to download

98 © Ramaiah University of Applied Sciences Laboratory Videos

99 © Ramaiah University of Applied Sciences Teaching-Delivery Methods

All Class Rooms are fitted with Audio Visual Systems with Internet Connection Students are required to have 85% Attendance 100 © Ramaiah University of Applied Sciences Internships, Group Project and Dissertation • Internships, Group Project and Dissertation – Industry Internship/Academic Internship (India/Abroad) (UG/PG)

– Group Projects (UG/PG)

– Dissertation (PG) • Internship and Dissertation work in M. Sc., and M. Com., programmes with opportunities to chose their elective modules from Engineering, Pharmacy and Management Faculties

101 © Ramaiah University of Applied Sciences Assessment Methods

• Assessment to test learning outcomes – Design to test outcomes – Knowledge and Understanding – Term written Tests Higher Order – Cognitive Skills (Critical, Analytical, Problem Learning Skills Solving, Research Skill) – Assignments, presentations, dissertations work – Practical Skills Practical Examination, Internships Projects ,Reports, Posters, Demonstrations – Transferrable Skills – Lower Order Learning Skills – Written Tests, Assignments, Demonstrations, Posters, Assignment Submissions, Punctuality, Group work, Social Work – Knowledge, Understanding, Analytical and Problem Solving Skills Written Examination , Dissertations, Reports, Publications 102 © Ramaiah University of Applied Sciences Assessing Practical Skills

Tests and Examinations

Oral Examinations

Reports

Demonstrations

Assessing Class Work

103 © Ramaiah University of Applied Sciences Marking and Grading

Sl. No Marks Scored Grading Description

 Exceptional knowledge and understanding of the course and its underlying concepts.  Critical evaluation /synthesis/analysis and of reading.  Evidence of breath and depth of reading to inform development of work. 1 90.1 – 100 O (Outstanding )  Exceptional demonstration of relevant skills.  Excellent communication. • Absolute Grading  Performance in some, if not all, areas deemed beyond expectation of the level.  Excellent knowledge of the course as the student is typically able to go beyond what has been taught  Evidence of breadth of reading to inform development of work. • Relative Grading 2 80.1 – 90 A+ (Excellent)  Excellent demonstration of relevant skills.  Demonstrates good communication skills.

 A good breadth of knowledge and understanding of the taught content, very good work characterized by evidence of wider understanding of the course as the student is typically able to relate facts/concepts together with some ability to apply to known/taught contexts. 3 70.1 – 80 A (Very Good)  Identification and selection of material to inform development of work.  Very good demonstration of relevant skills.  Demonstrates good communication skills  A good breadth of knowledge and understanding of the taught content and able to make meaningful synthesis and demonstrates good analytical skills. 4 60.1 - 70 B+ (Good)  Uses set material to inform development of work; addresses all aspects of the given brief.  Good demonstration of relevant taught skills.  Communication is competent.  A good breadth of knowledge and understanding of the taught content and able to make meaningful synthesis and lack good analytical skills 5 55.1 - 60 B ( Above Average )  Uses set material to inform development of work , addresses all aspects of the given brief  Demonstration of relevant taught skills  Communication is competent  Knowledge and understanding is just sufficient to deal terminology basic facts and concepts but to make meaningful synthesis. 6 50.1-55 C (AVERAGE)  Relies on set material to inform development of work.  Adequate demonstration of relevant skills over a limited range.  Communication /presentation is generally competent but with some weakness.  Knowledge and understanding is just sufficient to deal with terminology, basic facts and concepts but to make meaningful synthesis. 7 40-50 P(Pass)  Naively follows set material in development of work .  Adequate demonstration of relevant skills over a limited range .  Communication /presentation shows limited clarity and coherence.

 Insufficient knowledge and understanding of the course and its underlying concepts .  Ignores set material in development of work . 8 Below 40 F/AB : Fail or Absent  Given briefly may be only tangentially addressed or may ignore key aspect of the brief .  Fails to demonstrate relevant skills .  Communication shows no clarity, poor presentation, incoherent . 104 © Ramaiah University of Applied Sciences Overall Grading Normally A good distribution looks as shown below Class Average ~ 52 Standard Deviation ~ 14

Fail Pass Second First Distinction Pass (2/10) Class Class (1/10) (1/10) (4/10) (2/10) 105 © Ramaiah University of Applied Sciences Feedback to Students (PMAR)

• All marked and graded answer books are given to the students – To give a feedback on their performance – To practice transparency in the system – Sometimes a written feedback is given for students to improve their academic performance

106 © Ramaiah University of Applied Sciences Subject Assessment Board (SAB)

• SAB – The Subject Assessment Board meets at the end of each semester or at the end of certain modules to review the assessed work for each subject/module. The Board objectively examines the subject/module delivery, examination and evaluation processes to ensure academic standards based on data compiled for the semester/modules are met. The most important task is to review the standard of assessment and its comparability across subjects/modules. Each course/module marks distribution is analysed 107 © Ramaiah University of Applied Sciences Programme Assessment Board (PAB)

• PAB – The Programme Assessment Board meets at the end of each semester/year. The purpose of the Programme Assessment Board is to make decisions on progression and awards for all students registered for the named award for which the Board is responsible. In reaching a decision on progression or an award, the Board must consider the overall performance of the student. The overall performance of the student is made up of the course marks which have been confirmed by the Subject Assessment Board. 108 © Ramaiah University of Applied Sciences New Paradigms

• Semester Abroad – Students are allowed to complete 15-20 credits by studying a Foreign University of Repute • 3+1+1 – Students can complete final year of study in a foreign university and earn up to 50 Credits • Digital Initiatives – Student can complete up to 12 credits by passing on line courses offered by SWAYAM or any other well known online platforms

109 © Ramaiah University of Applied Sciences 8. Quality Assurance

110 © Ramaiah University of Applied Sciences Quality Assurance Cell

111 © Ramaiah University of Applied Sciences Review of Teaching Material/Assignments/Test Papers

• Review of Course Curriculum, Subject/Module Notes, Term Tests, Assignments and Written Examination Papers by Quality Control Department to adhere to Course/Programme Objectives

• Course/Module Notes Review • Assignment Review

• Term Tests and Written Examination Review

112 © Ramaiah University of Applied Sciences Staff – Student Consultative Committee Meetings

Staff-Student Consultative Committee Staff-Student Consultative Committee Meeting – FET & FAD – 09-11-2015 Meeting – FPH & FHMCT – 07-11-2015

Staff-Student Consultative Committee Staff-Student Consultative Committee Meeting – FDS – 22-12-2015 Meeting – PG Programmes – 08-01-2016 113 © Ramaiah University of Applied Sciences University Management System (UMS) All operations of the University are fully Automated Through UMS

114 © Ramaiah University of Applied Sciences 9. Award of Degree

115 © Ramaiah University of Applied Sciences Annual Convocation

116116 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences NAD

• Students Transcripts are ready to be uploaded on NAD

117 © Ramaiah University of Applied Sciences 10. Reservations and Diversity

118 © Ramaiah University of Applied Sciences Reservation Policy

119 © Ramaiah University of Applied Sciences Inclusiveness Faculty and Student Social Inclusiveness

S. No Category Number of Students Number of Faculty 1 SC 174 20 2 ST 47 6 3 OBC 651 107 4 Muslim Minority 300 3 5 Other Minorities 244 22 Faculty and Student Gender Equality Faculty Gender Equality Student Gender Equality

Total Number of Total Number of Total Number of Total Number of Faculty - Male Faculty - Female Students - Male Students - Female

218 148 2695 1442

120 © Ramaiah University of Applied Sciences Diversity

Student Diversity –National Student Diversity –International

Number of Full RAJASTHAN 43 Number of Full Time Name of the State Name of the Nationality Time Students TAMILNADU 105 Students KARNATAKA 2663 TELANGANA 33 Nepal 7 UTTAR PRADESH 88 A P 320 Ghana 20 ASSAM 49 UTTARA KHAND 10 U A E 5 BIHAR 126 WEST BENGAL 140 Iran 1 DELHI 14 HARYANA 7 Doha 2 GOA 10 SIKKIM 2 GUJRAT 15 MADHYA PRADESH 15 Kuwait 1 HP 7 CHATTISGARH 36 Nigeria 1 J & K 12 ARUNACHAL PRADESH 3 Muscat 1 JHARKAND 62 MIZORAM 1 Afghanisthan 3 KERALA 221 NAGALAND 3 Maldives 2 MP 19 ORISSA 8 Oman 2 MAHARASHTRA 50 ANDAMAN & NICOBAR 5 MANIPUR 6 ISLANDS Thailand 1 TRIPURA 5 DADAR 1 KSA 1 MEGHALAY 22 PONDICHERRY 1 South Africa 2 PUNJAB 10 TOTAL 4112 Total 49 121 © Ramaiah University of Applied Sciences 11. Pedagogy and Digital Initiatives

122 © Ramaiah University of Applied Sciences Pedagogy & Digital Learning Initiatives Cell • The main objective of this Cell are: – Be acquainted with the teaching and learning models being practiced across the world – Be acquainted with the application of technologies for teaching and learning – Be acquainted with various digital initiatives and digital technologies that can be aligned with University education system for effective teaching and learning – Implement appropriate teaching and learning methods, technologies across University faculties through Academic registry, Deans and Heads of Departments – Study the Impact of adoption of new learning and teaching methods and technologies on teaching and learning – Lay the Foundation for Lifelong Learning • The organisation of the Cell

Head, PDLI Cell Academic Division (Academic Registry, Faculty Members Associate Head, PDLI Cell Deans, HoDs, QAC)

123 © Ramaiah University of Applied Sciences Activities-PDLI-Cell

Head/Associate Head

Contemporary Digital Initiatives as Effective Teaching and Teaching and Learning Philosophies/Paradigms in Applied Teaching and Learning Methods Tools/Technology Curriculum Development Learning

Development of Templates for Flipped Class Rooms Flipped Class Rooms Curriculum Development MOOCS, Online Platforms, Blended Learning Blended Learning, considering contemporary LMS Face to Face Lectures Tools, Physical Models, Philosophies/Paradigms etc. Software

Students can complete up to 12 credits using MOOCs platform UGC-Gazette

124 © Ramaiah University of Applied Sciences 12. Research

125 © Ramaiah University of Applied Sciences Research and PhD programme • PhD Programme – Full Time and Part Time – Number of Scholars Registered: 224

Sl. Sl. Research Centre Research Centre No. No. 1 Automotive Technologies Research Centre Research Centre for Contemporary Tools and Techniques in 11 2 Centre for Aeronautical and Micro Air Vehicles Research Industrial Design 3 Energy and Power Systems Research Centre 12 Innovation and Entrepreneurship Development Research Centre Sanitation, Waste Management and Environmental Engineering 13 Photonics Research Centre 4 Research Centre 14 Centre for Batteries and Biofuel Research 5 Centre for Machine Learning and Computational Intelligence 15 Software Engineering and Big Data Modelling Research Centre 6 Centre for Control Systems and Robotics Research 16 Nutraceutical and Nutrition Research Centre 7 Centre for Biomedical Systems and 3D Printing Research 17 Oral Cancer Research Centre

Centre for Signal Processing and Communication Systems 18 Biomaterials Research Centre 8 Research 19 Dental and Maxillofacial Modelling and Simulation Centre 9 Structural Design and Analysis Centre 20 Drug Design and Development Centre 10 Composite Materials and Technologies Research Centre 21 Pharmacological Modelling and Simulation Centre

126 © Ramaiah University of Applied Sciences Doctoral Research Programme- PhD Degree • Duration – Full Time : 3-5 years – Part Time: 4- 6 years • Faculties – Engineering and Technology – Pharmacy – Dental Sciences – Management and Commerce – Science and Humanities – Art and Design – Hospitality Management

127 © Ramaiah University of Applied Sciences Ph.D. Programme Regulations

Programme Regulations

128 © Ramaiah University of Applied Sciences Ph. D. – Programme Structure

129 © Ramaiah University of Applied Sciences Research - Doctoral Research (Ph.D.)

Number of Number of Total Total Total Total Total Scholars Scholars Number of Number of Number of Number of Number of Faculty Admitted Admitted Scholars in Scholars in Scholars in Scholars in Scholars During During 2014 2015 2016 2017 Enrolled Apr-17 Sep-17 FET 26 13 24 19 13 32 95 FAD 02 01 02 00 00 00 05 FMC 05 15 19 03 07 10 49 FMPS 03 01 01 06 04 10 15 FPH 07 02 05 01 07 08 22 FDS 10 09 09 04 01 05 33 FHMCT 00 01 00 01 03 04 05 Total 53 42 60 34 35 69 224

130 © Ramaiah University of Applied Sciences Progress Review Panel (PRP)

Reviews PhD Scholars Progress Periodically

131 © Ramaiah University of Applied Sciences Sponsored Research

• Number of Projects completed so far: 108 • Number of ongoing Projects: 13 • Granting Agencies: – ISRO, DST, DST-TIFAC, DRDO- NPOL, GTRE, DARE, CVRDE, AR &DB, ER&IPR, NMRL, ADA, CAIR, LRDE, ADE, LSRB, DBT-WellCome Trust, ICMR, AYUSH, Social Welfare, VGST, KCTU – NP-MICAV, NP-GATET – EU-FP6, UKIERI

132 © Ramaiah University of Applied Sciences Number of Sponsored Research Projects Sanctioned (Including CARS) Datum 2014-15 2015-16 2016-17 2017-18 Total

CARS Other CARS Other CARS Other CARS Other CARS Other CARS Other

FET 54 25 03 04 06 03 04 02 06 10 73 44 FAD ------FMC ------FMPS ------FDS - - - - - 01 - - - 02 - 03 FPH - - - - - 01 - - - - - 01 FHMCT ------Total 54 25 03 04 06 05 04 02 06 12 73 48

Names of Agencies Funded: Department of Science and Technology (DST); GoK-University of Agricultural Dept.; DRDO - Aeronautics Research and Development Board (AR&DB); DBT- Welcome Trust; Vision Group of Science and Technology (VGST); Karnataka Council for Technology Upgradation; NP-MICAV, GTMAP, GATET, NPOL, MTRDC, CVRDE, SERB, ADA. ADE 133 © Ramaiah University of Applied Sciences University Interactions – Research Funding Agencies

134 © Ramaiah University of Applied Sciences Sponsored Research –Some Examples

135 © Ramaiah University of Applied Sciences Characteristics of Shock Vector Controlled Fluid Thrust Vectoring System for Jet Engine Sponsoring Body : AR & DB (DRDO) Principal Investigator : Dr. S.R. Shankapal

Salient Achievements: • The effect of cross-flow jet Mach number and injection angle on the thrust vectoring in an axisymmetric supersonic nozzle for shock vector controlled thrust vectoring was numerically estimated. • A design guideline was developed to achieve prescribed thrust vector performance in an axisymmetric supersonic nozzle for the varied angle of injection and Mach number of the cross-flow jet. 136 © Ramaiah University of Applied Sciences Cooling Concepts Related to Gas Turbine Blades

Sponsoring Body : GTRE(DRDO) Principal Investigator : Dr. H.K. Narahari

Salient Achievements: • Fluid flow and heat transfer simulated for a single pass ribbed flow passage and validated against data with published literature • The above work repeated for two pass smooth serpentine flow passage and correlation for friction factor and heat transfer established • Results of heat transfer studies for non-rotating two pass ribbed serpentine flow passage and validation against experimental/published numerical data 137 © Ramaiah University of Applied Sciences Combustion Simulation in a Twin Spark Ignition Engine

Sponsoring Body : Motorbike Manufacturing Company Principal Investigator : Dr. S.R. Shankapal

Flame radius at 10° crank angle interval for a twin and a single spark ignition

Twin Spark Single spark Pressure v/s Crank angle Twin spark Single spark 3.0E+06 300 Maximum Pressure=2.72+E06 Pa

Spark 2.5E+06 250 Maximum Pressure=2.02+E06 Pa plugs 2.0E+06 200

1.5E+06 150

Pressure (Pa) 1.0E+06 100

Total heat release (J)

5.0E+05 50

0.0E+00 0 180 232 283 334 360 386 412 437 463 489 515 Crank angle (Deg) Salient Achievements: • Studies were done to optimize spark plug positions, pressure rise, increased compression ration and reduced emission of pollutants

138 © Ramaiah University of Applied Sciences Design and Development of Helmet Mounted Conformal Antenna for Military Applications

Sponsor: DRDO-CAIR Principal Investigator : Govinda R. Kadambi

139 © Ramaiah University of Applied Sciences Optical Flow Based Navigation and Obstacle Avoidance

Sponsoring Body : DRDO-ARDB, ER-IPR, SIGMA (5 Projects) Principal Investigator : Dr. Govind R. Kadambi

Optical Flow Vectors

Salient Achievements: • Optical Flow Navigation Algorithms and Technology Demonstrators were developed for navigation of UGVs and MAVs in indoor and outdoor conditions

140 © Ramaiah University of Applied Sciences Geographical Track Following Algorithms for Autonomous MAV Navigation

Sponsoring Body : DRDO-ARDB Principal Investigator : Dr. Govind R. Kadambi and Viswanath Reddy

Track Following Concept Track Following Results Actual Actual Heading

0180 RIGHT if 090 Decision   LEFT if 90180

Salient Achievements: • Simulated the algorithm for extracting the orientation of a defined track • Tested the algorithm on test video sequences 141 © Ramaiah University of Applied Sciences Multi DOF Bionic Arm with Control-Assist Mode Functionality Sponsoring Body : DRDO-DEBEL Principal Investigator : Dr. Hariharan Ramasangu and S. N. Nagananda

Salient Features: Algorithms were developed and technology demonstration of Multi DOF Bionic Arm was made by fitting on Physically Challenged subject 142 © Ramaiah University of Applied Sciences Enhancement of Local Drug Delivery to Residual Brain Tumor Using Ultrasound Sponsoring Body : DRDO-ER & IPR, DEBEL Principal Investigator : Dr. M.S. Vijaya (Physics) and Dr. Ravigopal Varma (MSRINS)

US transducer

Acceptor

Donor chamber chamber

Pre-operative Post-operative In-Vivo CT scan CT scan Saline+drug Membrane (brain tissue) In-vitro experimental set-up Salient Features: Using Vibration Transducer, it is possible to diffuse the drug at a much fasters rate 143 © Ramaiah University of Applied Sciences Chitosan Polycaprolactone Scaffold For Bone Tissue Regeneration Investigating Team Members: Dr. Srinivasan(FSH), Dr. S. Srikari, Dr Arun Rao (FET) Dr. Harshitha , Dr. Sejal ,Dr. Pushpalatha, Dr. Mahatesha , Dr. Madhu, Dr. B.V. Sreenivasa Murthy (FDS)

Salient Features: 1. To develop a newer polymer based scaffold by conjugation of synthetic and natural polymer for bone regeneration 2. Chitosan is an excellent material that has various biomedical applications, ensures biodegradation, biocompatibility with cell culture and antimicrobial in nature 3. Polycaprolactoneis a bioresorbablepolymer with potential applications for bone and cartilage repair 4. Conjugating chitosan with Polycaprolactone is undertaken to optimize the desired properties of scaffold for bone regeneration(longevity) 144144 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences CD44 Gene Polymorphism Expression Among Sub Mucous Fibrosis Patients Investigating Team Members: Dr. Sujatha S. and Dr. Aninditya Kaur

Salient Features: 1. Sub mucous fibrosis is a premalignant condition, quite prevalent among Indian population (0.04-9.7%) 2. CD44 gene is a surface glycoprotein; associated with numerous fundamental biological processes and its upregulation can lead to enhanced chemoresistance, epithelial mesenchymal transition (EMT) and increased metastasis 3. The present study will be performed for one single nucleotide polymorphism (rs187115) of CD44 gene so as to formulate or standardize a treatment plan for sub mucous fibrosis patients 145145 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Mucoadhesive Inserts of Cinnarizine: A Novel Nasal Delivery System

Investigating Team Members: Dr. Bharath S. and Manoj Kulkarni

Salient Achievements Residence time of cinnarizine in the nasal cavity was increased; bypassing the first pass metabolism. Drug release was independent by Zero order kinetics over a period of 8 hours. Stable, biodegradable nasal insert of Cinnarizinewas developed

Patent filed: Pharmaceutical composition of nasal insert comprising cinnarizine, mucoadhesive and drug retardant polymers - Indian Patent Application - 3861/CHE/2014

146 © Ramaiah University of Applied Sciences Herbal Drugs –Development and Validation at FPH

1. Diabetes Pandanus roots Pandanus fascicularis Lam Curculigo roots Curculigo orchioides (Kalimusali) Cocculus leaves Cocculus hirsutus (Broom creeper, Ink berry) 2. Epilepsy Smilax rhizomes and Smilax zeylanica Linn roots (Chobchini) Nymphoides Nymphoidesindica rhizomes and roots (L.) Kuntze (Tagara)

147 © Ramaiah University of Applied Sciences Herbal Drugs –Development and Validation at FPH 3. Jaundice Capparis roots Capparis sepiaria (Khanthaari)

4. Fertility Drosera whole plant Drosera burmanii (Mukhajalee) Vahl 5. Renal disorders Nothosaerva roots Nothosaerva (Paashaanabedha) brachiata Wight 6. Immunity disorders Flickingeria Aerial Flickingeria macraei stem Lindl (Jevanti)

148 © Ramaiah University of Applied Sciences Seminars/Workshops/Conferences

• Seminars/Workshops • Conferences

Future Transport Design

Triple ‘O’ Conference

149 © Ramaiah University of Applied Sciences Seminars/Workshops/Conferences

2014-15 2015-16 2016-17 2017-18 Total S/W C S/W C S/W C S/W C FET 03 - 05 - 13 - 03 - 24

FAD - - - - 02 - - - 02

FMC 01 - - - 02 - 02 - 05

FMPS - - - - 02 - - 02 04

FDS 04 - 04 - 08 02 03 - 21

FPH - - 02 - 05 01 04 - 12

FHMCT - - 04 - 07 - 05 - 16

Total 08 - 15 - 39 03 17 02 84

150 © Ramaiah University of Applied Sciences University Publications

• University Journal Publications SASTech Journal Journal of Dental & Orofacial Research Journal of Management and Commerce

• Other Publications – Book of Student Project Abstracts – RUAS Book of Research Review Articles – RUAS Book of Research Progress Articles • General Publications – Reflections – Quarterly News Letter

– Kannada Saurabha 151 © Ramaiah University of Applied Sciences Journal Publications

Datum 2014-15 2015-16 2016-17 2017-18 Total

Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed

FET 257 23 36 20 29 10 27 19 51 23 400 95

FAD 15 00 08 00 11 01 02 00 07 00 43 01

FMC 18 01 13 04 18 01 16 09 24 05 89 20

FSH 00 00 05 04 12 11 11 09 19 09 47 33

FDS 381 132 136 106 153 124 76 33 107 69 853 464

FPH 146 48 36 27 31 19 14 09 35 21 262 124 FHMCT 01 00 02 00 04 00 00 00 04 00 11 00 Total 818 204 236 161 258 166 146 79 247 127 1705 737

152 © Ramaiah University of Applied Sciences Conference Publications

Datum 2014-15 2015-16 2016-17 2017-18 Total

Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed FET 172 27 29 16 39 14 51 38 39 34 330 129 FAD 00 00 04 00 04 00 00 00 00 00 08 00 FMC 04 00 01 00 02 00 75 15 04 00 86 15 FSH 00 00 08 01 08 01 06 04 19 00 41 06 FDS 03 01 60 00 62 00 55 04 34 13 214 18 FPH 01 00 02 00 18 00 04 00 16 00 41 00 FHMCT 01 00 00 00 00 00 06 00 00 00 07 00 Total 181 28 104 17 133 15 197 61 112 47 727 168

153 © Ramaiah University of Applied Sciences Total Publications

Datum 2014-15 2015-16 2016-17 2017-18 Total Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed Total Indexed FET 429 50 65 36 68 24 78 57 90 57 730 224 FAD 15 00 12 00 15 01 02 00 07 00 51 01 FMC 22 01 14 04 20 01 91 24 28 05 175 35 FSH 00 00 13 05 20 12 17 13 38 09 88 39 FDS 384 133 196 106 215 124 131 37 141 82 1067 482 FPH 147 48 38 27 49 19 18 09 51 21 303 124 FHMCT 02 00 02 00 04 00 06 00 04 00 18 00 Total 999 232 340 178 391 181 343 140 359 174 2432 905

154 © Ramaiah University of Applied Sciences Patents

Datum 2014-15 2015-16 2016-17 2017-18 Total

Filed Awarded Filed Awarded Filed Awarded Filed Awarded Filed Awarded Filed Awarded

FET 23 02 13 05 08 03 14 02 10 00 68 12 FAD 05 01 03 00 00 00 00 00 01 00 08 01 FMC 00 00 00 00 00 00 00 00 00 00 00 00 FSH 00 00 00 00 00 00 00 00 00 00 00 00 FDS 00 00 03 00 03 00 02 01 03 00 11 01 FPH 00 00 05 00 02 00 00 00 07 00 14 00 FHMCT 00 00 00 00 00 00 00 00 00 00 00 00 Total 28 03 24 05 13 03 16 03 21 00 102 14

155 © Ramaiah University of Applied Sciences 13. Training & Lifelong Learning

156 © Ramaiah University of Applied Sciences University Interactions - Training & Lifelong Learning

157 © Ramaiah University of Applied Sciences Training and Lifelong Learning

• Credit Based Training Courses – B. Voc., (Diploma, Advanced Diploma and Degree) – Postgraduate Certificate in Professional Practice (PGCPP) • Non Credit Based Training Courses – CTP (Corporate Training Programme) – ACP (Advanced Certificate Programme) – MTP (Modular Training Programme) – PC (Proficiency Courses) – Skill Development Courses

158 © Ramaiah University of Applied Sciences B. Voc. Programmes 1. Passenger Car Repair and Maintenance (D, AD, B. Voc.) 2. Machine Tool Operations and Maintenance (D, AD, B. Voc.) 3. Product Design and Modelling (D, AD, B. Voc.) 4. Mechatronics (D, AD, B. Voc.) 5. Computer Aided Design and 3D Printing 6. Electrical and Electronic Appliance Repair and Maintenance 7. Garment Manufacturing and Quality Control (D, AD, B. Voc.) 8. Culinary Operations (D, AD, B. Voc.) 9. Secretarial Practice and Office Administration (D, AD, B. Voc.) 10. Popular Music (D) 11. Theatre

159 © Ramaiah University of Applied Sciences Training and Lifelong Learning

Arup Bhattacharya Director

Visiting Industry, Publicity, Business Targets Narasimha Murthy Presenting to Industry and Managing Associate Director training programmes in emerging areas like Data science, Cyber Security, UoPC

Archana Vijay Kumar Mrs. Neena Murali Dr. Basavaraj Dr. Raghavendra Dr. Srivatsa H.S. Madhukar Deputy Joshi Manager Coordinator Coordinator Coordinator Manager Director Coordinator

B. Voc./ All ACP, MTP All Pharmacy All Dental All Hospitality CTP/ Marketing Management In Training Training Training Proficiency Part Time Training Engineering Courses Programmes Programmes M. Tech. Programmes

160 © Ramaiah University of Applied Sciences Corporate Training Programme

Automotive Aircraft Design Manufacturing

Product Design Electronics Client list

Management Tool Training

Our Clients :

More than 750 programmes 161 © Ramaiah University of Applied Sciences Advanced Certificate Programme

The courses under Advanced Certificate Training Programme (ACTP) are value addition courses with greater emphasis on student skill development on high-end, industry standard software and hardware tools

Modular Training Programme

Modular Training Programme (MTP) These courses are designed for the students/ working professionals who would like to acquire skills in specific areas

162 © Ramaiah University of Applied Sciences Proficiency Programme

Proficiency programme is a month long course offered on weekends for the benefit of working professionals & students. This provides an opportunity for the students and working professionals to update their knowledge in modern and thrust areas.

Proficiency list

163 © Ramaiah University of Applied Sciences Skill Development Programmes Training on CNC Machines

164 © Ramaiah University of Applied Sciences Skill Development Programmes Training on Conventional Machineries

CAD/CAM Software Training

165 © Ramaiah University of Applied Sciences Number of Delegates Trained Datum 2014-15 2015-16 2016-17 2017-18 Total ACP 1100 44 40 36 47 1267 MTP 2430 36 47 48 55 2616 CTP 16175 1575 1275 1300 1400 21725 SDP - 18 20 2 - 40 B. Voc. - - 4 36 114 154 PGCPP 22 8 5 5 15 55 UoPC 136 20 - - - 156 Proficiency 1416 47 19 391 410 2283 Seminars / 4616 2142 532 812 426 8528 Workshops Total 25895 3890 1942 2630 2467 36824 Names of Companies Participated in CTP 2014-15 Mahindra Trucks and Buses Ltd., Continental Technical Centre , General Motors - Technical Centre , Mercedes Benz R&D India Private Limited . 2015-16 Bosch Limited , General Motors - Technical Centre , TACO , Mercedes Benz R&D India Private Limited , Mahindra Trucks and Buses Ltd. , 2016-17 General Motors , Bosch Technical Centre India , KPIT Technologies , Mercedes Benz R&D India Private Limited , Mahindra & Mahindra Limited, Chennai , 2017-18 General Motors , Mercedes Benz R&D India Private Limited , Mahindra & Mahindra Limited, Chennai , TAFE , Genpact , 166 © Ramaiah University of Applied Sciences 14. Techno Centre

167 © Ramaiah University of Applied Sciences Industrial Research, Product development, Problem Solving and Incubation

Techno Centre Engineering – Engineering Design & Analysis Centre – Electronic System Development Centre – New Product Design and Development Centre – Centre for Mechanical Prototype Development

168 © Ramaiah University of Applied Sciences University Interactions – Problem Solving

169 © Ramaiah University of Applied Sciences University Interactions – Consultancy & Product Development

170 © Ramaiah University of Applied Sciences Industrial Problem Solving -Examples

Finite Element analysis CFD and Heat Transfer Analysis

Kinematic and Combustion- Analysis Dynamics Impact /Crash Analysis Analysis 171 © Ramaiah University of Applied Sciences Title of the Project Automotive Torque Converter

Collaborative Partner Combat Vehicle Research and Development Establishment (CVRDE)-DRDO

Principal Investigator Prof. S.R. Shankapal

Project Team Members Parikshith N., Madan J., Chetan Kulkarni, Ravishnakar, Kishore S. M.

Technology Domain Area Automotive Component Design

Duration and Number of Project Duration: 2 Years Number of Publications: 2 Publications

172 © Ramaiah University of Applied Sciences Title of the Project Optimisation Engine Cooling System Geometry for Desired Coolant Flow Rate

Collaborative Partner Combat Vehicle Research and Development Establishment (CVRDE)-DRDO

Principal Investigator Prof. S.R. Shankapal

Project Team Members Parikshith N., Madan J., Chetan Kulkarni,

Technology Domain Area Automotive Thermal System Design

Duration and Number of Project Duration: 1 Years Number of Publications: 0 Publications

173 © Ramaiah University of Applied Sciences Title of the Project Electromagnetic and Thermal Analysis of 5kW BLDC Generator

Collaborative Partner Combat Vehicle Research and Development Establishment (CVRDE)-DRDO

Principal Investigator Prof. H. K. Narahari

Project Team Members Parikshith N., Madan J., Rohith Panduranga, Pradeep T.S., Swathi Prasad B.K.

Technology Domain Area Thermal System Design and Analysis

Duration and Number of Project Duration: 1 Years Number of Publications: 0 Publications

LabelID=IPhaseC

LabelID=IWindingA LabelID=IResistorA

A LabelID=VPhaseA

LPhaseA 0nH 168mOhm L1008 R1009

Model

Rect LabelID=VPhaseC

D1070 D1067 D1065 R1061 LabelID=IFinal

R1031 168mOhm

LabelID=IPhaseA C LabelID=VFinal

LabelID=IResistorC D1069 D1068 D1066

0

0nH

L1032

LPhaseC LabelID=IWindingC

L1026 LabelID=VPhaseB 168mOhm R1025 0nH LPhaseB B

LabelID=IResistorB LabelID=IWindingB

LabelID=IPhaseB

174 © Ramaiah University of Applied Sciences Title of the Project Thermal Cooling Analysis of Electronic Systems

Collaborative Partner Bharath Electronics Limited

Principal Investigator Madan J

Project Team Members Parikshith N., Rohith Panduranga,

Technology Domain Area Thermal System Design and Analysis

Duration and Number of Project Duration: Short Durations Number of Publications: 4 Publications

Transmitter Cabinet PDP Cabinet ACT Cabinet

Single Display Unit Air transport Rack (ATR) 175 © Ramaiah University of Applied Sciences Product Design and Development- Examples

OMAP 3530 & Max CPLD based USB Mass Storage Controller for MR Mounts Device

32 Bit –ARM- PID Controller for Video Transceiver for Active Controller Automotive Semi Corner Round Firing RFID Active Suspension 176 © Ramaiah University of Applied Sciences Hemi-Pelvis Implant Development

177 © Ramaiah University of Applied Sciences Bionic Hand Development

178 © Ramaiah University of Applied Sciences Haemostatic Drug Delivery System

179 © Ramaiah University of Applied Sciences Techno Centre Recognition Letters

Design- Vendor Design and Analysis

CEMILAC - CERTIFICATION Design and Analysis Design and Analysis 180 © Ramaiah University of Applied Sciences Techno Centre Recognition Letters

Formulation and Development Development of Atorvastatin of Liquid Bandage Lipid Formulation for Enhanced Oral Bioavailability

181 © Ramaiah University of Applied Sciences Number of Projects Executed

Datum 2014-15 2015-16 2016-17 2017-18 Total

Total 325 27 33 45 53 483

Names of Companies worked for 2014-15 Mody Pumps, Mistral Solutions, HHV, Entec, DARE, Enginium Designs, Hynetic, BEL, CVRDE 2015-16 SKF, Saturam, Zoo Grip, Merlinhawk Aerospace, Qatar Steel, Greensol Renewable Power, Alligator Designs, BISS, IKA, Fouress, HMT, BEL, CVRDE, NPOL, DARE, ITC, I-Tech Controls 2016-17 Mekhos , Filtrex, Add Technologies, Aurora , GTRE, BEL, ABB, TATA Advanced Systems, Axis Cades, HYDAC, SIKA, UCAM, Control Infotech , Amphenol, Tenova, BISS, ITC, Elmeasure India Pvt. Ltd, 2017-18 BHEL, NPOL, KSTIDC, MTRDC, Veniktools, GTRE, BEL, HMT, Faurecia, IntEssence, Paras Defence, Rajamane, Ducom,

182 © Ramaiah University of Applied Sciences 15. Technology Incubation and Entrepreneurship Development Centre

183 © Ramaiah University of Applied Sciences Ramaiah Technology Business Incubator (RTBI)

Early stage Funding (Self, Govt., FA) Accelerators (Mentoring)

A Early stage Incubators s Venture Angel p Funding Funding i r Attract and i Identify n Aspiring Technology Business Incubation g Entrepreneurs Product and Entrepreneurship Patents through Incubation Development E Start -Ups Publicity & (Supports Aspiring (Supports Aspiring n Entrepreneur) Entrepreneur) t Screen Feasible Ideas r Stage-1 Stage-2 e p r Govt. Self Funding Funding e CEO- n Technology Product Incubation and Governing Council e Entrepreneurship Development u Cell r

Admin Advise and Support Team Support Teams from University: Advice on-screening ideas, Technology Product Development, Incubation Funding Patenting, business plan development, Commercialisation, Marketing, Business Setup &Operations, Human Resources Resources from University: Laboratory, Workshops, Library, ICT Facilities, Physical Space 184 © Ramaiah University of Applied Sciences Ramaiah Technology Business Incubator (RTBI) • Ramaiah Technology Business Incubator (RTBI) is formed – Ramaiah –GoK Technology Business Incubator is being Established – Amount of Grant Sanctioned by GoK (IT, BT, ST, now Innovation and Technology Department): Rs. 6 Crores , 2.1 crore received – We are planning to inaugurate Shortly

185 © Ramaiah University of Applied Sciences MSME-GoI Funding Number of Products/Business Incubated

2014-15 2015-16 2016-17 2017-18 Total Products 6 6 3 - 15 Incubated Funding MSME(GOI) MSME(GOI) MSME(GOI) - Agencies Total 6 6 3 - 15

Names of Companies /Businesses Established 2014-15 WORLD VISION SOFTEK, Cloudruples, I-Tech Hybrid Controller, ASPARTIKA, ARGNER, PARAM TECHNOLOGIEs 2015-16 AIR PAPER, Bhumaya, Krimmi Bio-Tech, Next level Nutraceuticals, ORC Power, CuraBiotics

2016-17 Healed Labs, PODS, FIRSTLIGHT 2017-18

186 © Ramaiah University of Applied Sciences MSME Technology Business Incubator- Ideas Incubated S. No. Project Title 1 Nitro CRM - Powerboost your sales performance

2 Cloudruples

3 I-Tech Hybrid Controller

4 Cost Effective Nutraceuticals to Combat Diabetes, Obesity & Protein Deficency

5 Biodegradable Palm Fibre Mats with Extraction of Vitamin A&E

6 Hot Water Cum Compost Generator (HCCG)

7 AIRPAPER

8 A Novel and Innovative Approach of Recovering Sericin as Industrial Effluent from Silk Reeling Industry towards Development of Products related to Animal Nutrition, Microbial Culture, & Cosmeceuticals 9 Development of Low cost artificial diets for health rearing of silkworms

10 Low Temperature Power Generation with ORC Systems (WHPGS)

11 Novel Therapeutic Components from Banana Plant Extracts

12 EPN Biocontrol Technology To Protect Crops Against Insect Pests, while Avoiding Chemical Pesticides

13 Earths field NMR spectrometer

14 PODS: Single seater transport for developing India

15 FIRSTLIGHT 187 © Ramaiah University of Applied Sciences 16. Student Affairs

188 © Ramaiah University of Applied Sciences Directorate of Student Affairs

Director Arup Bhattacharya

Associate Director Manjunath Nayak

Accommodation and Hostel, Student Placements & Internship Sports and Athletics Student Scholarship and Student Programmes Student Health Arup Bhattacharya Mr. Kumar Mr. P. Venkatesha Murthy Manjunath Nayak Dr. Prabhakar Mr. Dayananda (Warden) Fresher's Day Srikishen Sports Managers Mr. A.S. Anand (Hostel Cultural Activities Vikram Manager) Parents Day Asha Shyam Sports Activities Mr. Srikishen(Accommodation Inter University Cultural Internship and Placement Team Inter University Sports Coordinator) Activities Tournaments

Student Technical Competition- RUASIC (Cell) Student Clubs –DTSLD (Debate, Quiz, Essay competitions Etc. )

Student Industry Visits – Faculties/Departments Students Study Abroad Programme -ICPM

189 © Ramaiah University of Applied Sciences Student Accommodation and Cafeteria

190 © Ramaiah University of Applied Sciences Student Placements Companies Recruited our Students

191 © Ramaiah University of Applied Sciences Student Internships and Placements

192 © Ramaiah University of Applied Sciences Number of Students Underwent Internship

2014-15 2015-16 2016-17 2017-18 Total Reg. Sucs Reg. Sucs Reg. Sucs Reg. Sucs Reg. Sucs B. Tech. 164 91 Reg. starts from - Reg. starts from - Reg. starts from - 164 91 Jan 2018 Jan 2019 Jan 2020 B. Des. 11 1 Reg. starts from - Reg. starts from - Reg. starts from - 11 1 Jan 2018 Jan 2019 Jan 2020 BDS NA NA NA NA NA NA NA NA - - B. Pharm. 30 30 Reg. starts from - Reg. starts from - Reg. starts from - 30 30 Sep 2018 Sep 2019 Sep 2020 Pharm. D. Reg. starts from - Reg. starts from - Reg. starts from - Reg. starts from - - - Sep 2019 Sep 2020 Sep 2021 Sep 2022 BHM 71 71 72 72 Reg. starts from - Reg. starts from - 143 143 Oct 2017 Oct 2018 M. Tech. 148 63 114 43 Reg. starts from - Reg. starts from - 262 106 Oct 2017 Oct 2018 M. Des. 8 2 7 0 Reg. starts from - Reg. starts from - 15 2 Oct 2017 Oct 2018 MBA 66 62 79 76 Reg. starts from - Reg. starts from - 145 138 Oct 2017 Oct 2018 MHA 16 12 18 17 Reg. starts from - Reg. starts from - 34 29 Sep 2017 Sep 2018 M. Com. 5 3 9 8 Reg. starts from - Reg. starts from - 14 11 Oct 2017 Oct 2018 M. Sc. 2 1 9 1 Reg. starts from - Reg. starts from - 11 2 Oct 2017 Oct 2018 MDS NA NA NA NA NA NA NA NA - - M. Pharm. 20 0 9 1 Reg. starts from - Reg. starts from - 29 1 Sep 2017 Sep 2018 Total 541 336 317 218 - - - - 858 554 193

©M. S. Ramaiah University of Applied Sciences Number of Students Placed for Jobs 2014-15 2015-16 2016-17 2017-18 Total

Reg. Sucs Reg. Sucs Reg. Sucs Reg. Sucs Reg. Sucs

B. Tech. 164 Starts from Reg. starts from - Reg. starts from - Reg. starts from - 164 - Sep 2017 Jan 2018 Jan 2019 Jan 2020 B. Des. 11 Starts from Reg. starts from - Reg. starts from - Reg. starts from - 11 - Sep 2017 Jan 2018 Jan 2019 Jan 2020 BDS NA NA NA NA NA NA NA NA - -

B. Pharm. Reg. starts from - Reg. starts from - Reg. starts from - Reg. starts from - - - Sep 2017 Sep 2018 Sep 2019 Sep 2020 Pharm. D. Reg. starts from - Reg. starts from - Reg. starts from - Reg. starts from - - - Sep 2019 Sep 2020 Sep 2021 Sep 2022 BHM Reg. starts from - Reg. starts from - Reg. starts from - Reg. starts from - - - Apr 2017 Apr 2018 Apr 2019 Apr 2020 M. Tech. 148 29 114 1 ( Reg. starts from - Reg. starts from - 262 30 Campus Oct 2017 Oct 2018 process in progress) M. Des. 8 2 7 0 Reg. starts from - Reg. starts from - 15 2 Oct 2017 Oct 2018 MBA 66 33 79 9 Reg. starts from - Reg. starts from - 145 42 Oct 2017 Oct 2018 MHA 16 8 18 1 Reg. starts from - Reg. starts from - 34 9 Sep 2017 Sep 2018 M. Com. 5 0 9 0 Reg. starts from - Reg. starts from - 14 0 Oct 2017 Oct 2018 M. Sc. 2 1 9 1 Reg. starts from - Reg. starts from - 11 2 Oct 2017 Oct 2018 MDS NA NA NA NA NA NA NA NA - -

M. Pharm. 20 13 9 12 Reg. starts from - Reg. starts from - 29 25 Sep 2017 Sep 2018 Total 440 86 245 24 - - - - 685 110 194

©M. S. Ramaiah University of Applied Sciences Athletics & Sports Facilities • Outdoor Games Areas: • Indoor Games: • Outdoor Facilities: – Basket ball court, volley ball court, throw ball court, mini foot ball court, two cricket net practice pitches • Indoor Facilities: – Table tennis Boards, carom boards, chess boards • Gymnasium: – 8 station multi gym, Tread mills, Dumbbells, Plates, Barbells, Dips stand, rack stand, Bench press

195 © Ramaiah University of Applied Sciences Annual Athletics Meet

196 © Ramaiah University of Applied Sciences Inter University Games

The first Ramaiah Inter University/Collegiate Basketball Tournament for boys and Volleyball Tournament for girls was held in Peenya campus from 2nd to 5th March 2018. The Chief Guest for the inauguration program was Mr. Austin Joy Mildred D’Almeida, International Basketball player and Ekalavya Awardee and the Guest of Honour was Ms. Rohini H, International Volleyball player and Ekalavya Awardee. Honourable Vice Chancellor of RUAS Prof. S R Shankapal presided over the function.

197 © Ramaiah University of Applied Sciences Inter University Games • Ramaiah Interuniversity Basket Ball Tournament for Men –Rolling Shield

• Ramaiah Interuniversity Volley Ball Tournament for Women –Rolling Shield

An Annual Event 198 © Ramaiah University of Applied Sciences Student Interuniversity/College Sports Competitions

Competition Organisers Year Conducted at RUAS Team Status

Inter GEF Athletic Won 6 Gold, 6 Silver, RIT 2018 GEF Ground Meet 3 Bronze

IDA All India Inter Sri Krishnadevaraya Dental T20 Cricket IDA 2018 Quarter- finalist Dental College, Bengaluru Tournament

Inter University/ Christ University 2018 Christ campus Semi - finalist Cricket Tournament Inter University/ Throw Ball PES University 2017 PES University Campus 1st round Tournament Inter University/ REVA University 2017 REVA campus Semi-finalist Cricket Tournament

Inter University/ Christ University 2017 Christ University Hosur 1st round Basket Ball road Campus Tournament 199 © Ramaiah University of Applied Sciences Student Interuniversity/College Sports Competitions

Competition Organisers Year Conducted at RUAS Team Status

Inter University/ Christ University 2017 Christ University Hosur 1st round Volley Ball road Campus Tournament PROMETHUS 2017 MSRMC 2017 HMT Ground, Semi-finalist Intercollegiate Bengaluru Cricket Tournament

Inter collegiate/ Christ University 2017 Christ University Mysore 1st round Cricket Tournament road Campus Inter collegiate/ Christ University 2017 Christ University Mysore 1st round Foot Ball road Campus Tournament

Inter collegiate/ St. Pouls college 2016 St. Pouls Campus 1st round Volley Ball Tournament

Inter collegiate/ RRCE 2016 RRCE campus 1st round Volley Ball Tournament 200 © Ramaiah University of Applied Sciences Student Interuniversity/College Sports Competitions

Competition Organisers Year Conducted at RUAS Team Status

Inter collegiate/ Christ University 2017 Christ Uni. Mysore road 1st round Cricket Tournament campus

PROMETHUS 2017 MSRMC 2017 HMT Ground, Semi-finalist Intercollegiate Bengaluru Cricket Tournament

KIMS All India Manipal University 2017 Manipal University, 2nd round Cricket Tournament Manipal Inter Collegiate/ NMIT , Bangalore 2017 NMIT campus 1st round Volley Ball Tournament

Inter GEF Athletic RIT 2017 GEF Ground Won 4 Gold, 12 Meet Silver, 9 Bronze

Inter collegiate/ Christ University 2017 Christ University Mysore 1st round Volley Ball road campus Tournament 201 © Ramaiah University of Applied Sciences Student Interuniversity/College Sports Competitions

Competition Organisers Year Conducted at RUAS Team Status

Inter collegiate/ Christ University 2017 Christ University Mysore 1st round Cricket Tournament road campus

Inter collegiate/ St. Pouls college 2016 St. Pouls Campus 1st round Volley Ball Tournament

Inter collegiate/ RRCE 2016 RRCE campus 1st round Volley Ball Tournament Inter collegiate/ Ramaiah I T 2016 Sir M V I T Campus 1st round Cricket Tournament Ground

Inter collegiate/ RVCE 2016 RVCE , Campus Semi - finalist Volley Ball Tournament

Inter collegiate/ St. Pouls college 2016 St. Pouls Campus 1st round Volley Ball Tournament 202 © Ramaiah University of Applied Sciences Student Interuniversity/College Sports Competitions

Competition Organisers Year Conducted at RUAS Team Status

Inter collegiate/ RVCE 2016 RVCE , Campus Semi-finalist Volley Ball Tournament Intercollegiate RGUHS 2016 Rajarjaeshwari Medical Semi-finalist Cricket Tournament College, Bengaluru

RGUHS Bangalore RGUHS 2015 St. Johns Medical College 1st round Zone Intercollegiate Bangalore Cricket Tournament SPIN -2015 All India SDM Dental College 2015 SDM Dental College, Quarter- finalist Inter Dental T20 Dharwad Cricket Tournament

RGUHS, Bengaluru RGUHS 2015 Dr. B. R. Ambedkar Runners - up Zone, Table Tennis College, Bengaluru Tournament

CHAIRMAN ACS Rajarajeshwari 2014 Rajarjaeshwari Medical Runners-up TROPHY Dental College & College, Bengaluru Hospital 203 © Ramaiah University of Applied Sciences CULTURAL FEST - AKAIRA

204204 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Fresher's Day

205 © Ramaiah University of Applied Sciences Trekking

206 © Ramaiah University of Applied Sciences Student Grievances and Redressal Cell

• Such of those students have any grievances can submit a filled up form stating the grievances • Such Filled up application form be submitted to the head of the Cell – Mr. Arup Bhattacharya -Head of the Cell at Peenya Campus – Mr. Srikishen- Head of the Cell at Gnanagangothri Campus • Grievances will be addressed by “ Student Grievances and Redressal Committee” with in a week submitting the filled up form • Student Grievances and Redressal Form can be downloaded from the University website http://www.msruas.ac.in/student/grievances

207 © Ramaiah University of Applied Sciences Mandatory Service to Society Programme

All student and staff Members are required to participate two days in community Service Programme

208 © Ramaiah University of Applied Sciences Service to Society

Denture Treatment Camp-Chikkaballapur Desilting of Pond-Thyavanahalli-Kolar Dist

Best out of Waste

Painting a Rural School- Mandya Dist. Training Polytechnic Students 33 teams, each team containing around 25-30 members participated in service to society programme 29-30th of January 2016 209 © Ramaiah University of Applied Sciences Dental Hospital

Year Sl . No No of Patients Treated (From Aug – To July)

1 2014 - 2015 1,56,881

2 2015-2016 1,58,569

3 2016-2017 1,58,896

4 2017 – Till Date 93,046

Total 5,67,392

210 © Ramaiah University of Applied Sciences Healthcare Programmes

• National Pulse Polio Programme- GoI/GoK –organised by FPH – Around 10000 Children were administered polio drops • Danta Bhagya Yojane ( GoK) – 360 dentures were delivered by the Dental Hospital • Danta Kavacha- (GoK) – 15000 children were treated for Comprehensive Oral Care

211 © Ramaiah University of Applied Sciences Blood Donation Camps

Year Number of members participated Blood collected in Units

2015-2016 250 140

2016-2017 350 240

2017-2018 480 315

Total 1080 695

212 © Ramaiah University of Applied Sciences Annual Parents Day

• To make parents familiar with University-Teaching and Learning, Learning Resources, University’s Expectations • To understand Parents- Students Aspirations • To implement new ideas and methods in teaching and learning and other support systems to meet parents- students aspirations • To establish communication between teachers-parents to design and implement activities to enhance student abilities

213 © Ramaiah University of Applied Sciences 17. RUAS Innovation Centre

214 © Ramaiah University of Applied Sciences RUAS Innovation Centre

• The main objectives of this Centre are: – Encourage students and staff of MSRUAS to develop innovative and creative ideas that are useful to Society – Help students and staff members to convert innovative ideas into technology demonstrations – Patenting of ideas – Help students and staff participate in national and international competitions – Provide necessary guidance for Technology and Business Incubation – Seek funds for development of technology demonstrations and participate in competition from Industries and Business organisations through CSR initiatives of the organisations

215 © Ramaiah University of Applied Sciences RUAS IC Organisation

RUAS Innovation Centre (RIC)

RUAS Innovation Centre (RIC)- Students Section RUAS Innovation Centre (RIC)- Faculty and Staff Section

Narendra Babu Dr. B.V. Vijay Head –RUASIC (SS) Dr. Mahesh Varpe Dr. Punithavathi Dr. Pushpavathi

Associate Heads from Each Faculty

1. RUAS Innovation Challenge for Students –Annual Event 2. Students are encouraged to take part in National/International Competitions 3. Faculty members are encouraged to develop interested Products 216216 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Student Technical and Innovation Competitions

217217 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences RUAS Innovation Challenge-2017-18 Indigenous Nutrition

Low Cost Healthcare

BiomimickingRobots Renewable Energy

Artificial Intelligence Based Games Clean Water 218 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Bachelor’s and Master’s level design and engineering students of RUAS participated in a PACE Urban Mobility Challenge teaming with 1 24th July 2017 PACE Global Challenge 2017 other design and engineering universities around the world. The concept developed by the design team from RUAS secured 1st place within the team.

"World Robotic Olympiad Students from B.Tech took part in the event 7th to 8th Oct 2 (WRO)" National Organized by India stem foundation for India 2017 competition Student Name: Rahul Singh (B.tech)

Mr. Sachin V and Mr. Manoj Kulkarni students of Faculty of Engineering and Technology(FET) M.Tech. Automotive Product Design(APD) won the first and second place in PACE PUMA Design Design Competition 21st and 22nd Competition held on February 2017. Students 3 Personal Urban Mobility February 2017 were competing with various design Access challenge (PUMA). Universities to meet the Personal Urban Mobility Access challenge (PUMA). Totally 8 designer submitted their design for this competition.

219 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Students of FT-15 M Tech Automotive Engineering, Vijay Dominic and Sooraj won the 2nd Prize in PACE Course Competition on Siemens UG-NX conducted at PES University on 4 25 January 2017 PACE Course Competition 25 January 2017 in association with PACE (Partners for Advancement of Collaborative Engineering Education). Totally seven teams participated in the final round of UG-NX competition from various institutions.

"World Robotic Olympiad FET Students (Batch-1) Won FIRST Prize in the 25th to 27th 5 (WRO)" National "World Robotic Olympiad (WRO)" National Nov 2016 competition competition and participated in Internationals

Around 8 teams appeared for phase 1 and 1 14th oct 2017 DRDO Robotics and cleared for 2nd round 6 to Unmanned Systems Qualified for next phase of the competition 29th 25th May 2018 Exposition March 2018

220 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Michelin Challenge Design- Michelin Concourse Five Students from Automotive product design 7 1st March 2018 d'Elegance 2050 has submitted the design

Boeing National Aeromodelling Competition The competition involves RC aircraft with electric motors. The competition provides a platform to compete for different flyers through 15th March a series of different rounds doing different 8 2018 to 18th Techkriti'18, IIT Kanpur maneuvers and showing their talent in flying like March 2018 payload dropping, limbo flying and on spot landing. More than 200 people participated in Sky Sparks 16 which was sponsored by Boeing. Three students from first year B.Tech. Aerospace Engg.

Annual HUM3D Competition Student from Automotive product design has 9 29th Sept 2017 Car Render challenge for 3D taken part in the CAR Render challenge 2017 Artists Student name: Nithin Krishna

221 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Third Year EEE students of Faculty of Engineering and Technology (FET) has secured 2nd Rank in Advanced Robotics Challenge at "World Robotic Olympiad 25th to 27th WRO nationals organized by India STEM 10 (WRO)" National Nov 2016 Foundation held in Kolkata during October 22- competition 23 2016 and got selected for WRO internationals held for the first time in INDIA at Delhi on 25th Nov to 27th Nov 2016.

Fifth Semester EEE students of Faculty of Engineering and Technology (FET) had participated in ROBOVR –INDIA’s 1st Robot 17th and 18th 11 ROBOVR – INDIA’s Sports competition in IIT Bombay under Robo Dec 2016 Bowling Category, conducted by High-Tech Robotics company on 17th and 18th December 2016.

In the event Mechathlon –A test on Fundamentals with trivial materials, Mr T M Seshagopalan and Mr Vinayak Pai, B Tech IISc. Open Day 12 5th March 2016. (Mech.) 4th semester students were the Competitions Runners. 20 teams participated from various Universities/Colleges in this event.

222 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

In Egg’ chute- Save the eggs from free fall using your creative ideas, out of 16 teams only four teams Egg ‘chute landed successfully and the 5th March 2016. team from MSRUAS was one among them. Mr. 13 IISc. Open Day Competitions Suraj, Mr. Adeeb Delvi(Civil), and Mr. Ashish (EEE) got special appreciation for the innovations in design.

Mr. Pravardhan V. of 1st semester Mechanical “TOURCHLISTA - Inter Engineering branch of our University won in the 19th October 14 Collegiate Photo-graphy category of ‘Diversity’ in “TOURCHLISTA 2014 Competition” FESTIVAL” inter collegiate PHOTOGRAPHY competition held at PESIT South campus,

Organized by Texas Instruments around 26 Texas Instruments India 15 10.02.2018 teams across university applied, 17 cleared Innovation Challenge 2018 phase 1 and 13 cleared phase 2

223 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

All the events were after the academic hours, 16 10.02.2018 Code debug yet the response was overwhelming 110 students took part in the event.

Two teams who participated in Honeywell Hackathon competition held on 3rd , 4th and 5th August 2015, were shortlisted for final round. These 2 ideas from the students was 17 05/Aug/2015 Honeywell HACKATHON showcased at the Tek-Unite day, a Honeywell partner event, on the side-lines of the annually held Honeywell Technology Symposium –India 2015, held in Bangalore on August 17, 2015.

224 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

9th, 10th and 11th February FET and FAD to Model UN Conference, 18 UN Conference 2018. conducted at SRM University Chennai,

Project: Futuristic Vehicle Student name: Roshit 16th, and 17th 12th Pune design festival 19 February 2018. 2018 Competition is open for design projects Battle of Projects completed as part of the curriculum in reputed design institutes in India.

Project: Wearable self Defence Device Student name: Pranathi 12th Pune design festival 16th, and 17th 20 2018 Competition is open for design projects February 2018. Battle of Projects completed as part of the curriculum in reputed design institutes in India.

225 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Project: Compost Bin for Indian Kitchen Student name: Sachin 12th Pune design festival 16th, and 17th 21 2018 Competition is open for design projects February 2018. Battle of Projects completed as part of the curriculum in reputed design institutes in India.

Easy-walker for Indian elderly and disabled 9th Pune Design people. Won the first place in “Battle of 26th, and 27th Festival2015 Projects” design competition at the Pune Design 22 February 2016 Battle of Projects Fest, Under Product Design category Student Name: Parashuraman

"World Robotic Olympiad Students from B.Tech took part in the event 7th to 8th Oct 23 (WRO)" National Organized by India stem foundation for India 2017 competition Student Name: Rahul Singh (B.tech)

226 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Elite invites you to design the new metal Coca- Cola bottle, creating a handy product, suitable Coca-Cola Bottle Design for indoor and outdoor use, with an easy to 24 15th Sept 2017 Award drink system. Student Name: Afshaar

Ms. Vibha (1st Year) and Mr. Abhinav (2nd Year), B.Design students of Faculty of Art and Design bagged 1st and 2nd prize respectively in Monochrome Art Competition held at In-Bloom, 25 4 Feb 2017 “Monochrome Painting” a national-level cultural festival organised annually by Christ University, Bengaluru held on 4 Feb 2017. Approximately 25 colleges from different parts of India had participated in the event.

Bachelor’s and Master’s level design and engineering students of RUAS participated in a PACE Urban Mobility Challenge teaming with 26 24th July 2017 PACE Global Challenge 2017 other design and engineering universities around the world. The concept developed by the design team from RUAS secured 1st place within the team.

227 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Painting Competition 31st March 27 'Furore‘ inter college fest Theme: Fantasy or SciFi 2017 Students Secured 2nd Prize was bagged byMs. Vibha (1st Yr) and Mr. Ruthwik (2nd Yr)

Painting Competition Theme: Fantasy or SciFi 31st March 28 'Furore‘ inter college fest Students Secured 1st Prize was bagged by Mr. 2017 Abhinav (2nd Yr) & Mr. Tarun (2nd Yr) in Team 1

27th to 31st July 2014 - 2016 Pace Global RENCONFIGURABLE SHARED USE MOBILITY 29 2015 Collaborative (Phase 1) SYSTEM

228 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Reconfigurable Shared-Use MSRUAS Student as part of the International 24th to 29th Mobility Systems Team in 30 July 2016 Competition (Phase 2) the RSMS Team 6 during the Presentation with Judging Panel

Mr. Azlan Mohammed Shakib and his wife Mrs. Amina Iman, Part-time Product Design Masters’ Students had developed a product which creates an ecosystem to grow vegetables at Bengaluru MINI MAKER 31 16/Oct/2015 home ensuring 30 percent faster growth while FAIRE 2015 saving 90 percent water compared to conventional methods. The couple intend to further develop the product through MSME Scheme.

Mr. SundarR. and Mr. Trived K. students of MBA from Faculty of Management and Commerce were selected as delegates for the Young Leader’s Summit’ at 32 Sep/2015 ‘Young Leader’s Summit’ at Vista 2015, IIM, Vista 2015, IIM, Bangalore Bangalore during September 2015. They participated in the case study solving event and won for being among the top Three.

229 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Event was held at FDS, MSRUAS. The event was inaugurated by Dean Dr.B.V.Sreenivasa Murthy & Dr. World Aids Day a Silju Mathew. Introductory talk was given by Dean Poster competition on 33 1-12-2014 followed by Dr.KavithaPrasad and Dr. Lalithaon the the theme "GETTING theme. Later a lecture on HIV was given by Dr. TO ZERO" Rajanikanth on the theme of the WORLD AIDS Day "Getting to Zero".

Organized at Faculty of Dental Sciences, 9 teams Collage competition comprising of 3 members each took part. The judges with the theme of were Mr. Gopala Krishna, Registrar Administration, FDS, "Communal Harmony MSRUAS and Dr. Raghavendra, Senior Tutor, FDS, 34 25-11-2014 and National MSRUAS. Integration 1st Prize: Ms. Akshata, Ms. Alisha, and Ms. Niveditha 2nd prize: Dr.Pallavi.HN , Dr. Prashanti and Dr. Shwetha

230 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Foundation day Organized as a part of the Foundation day program of the program of the IIAACD Indian association of aesthetic and Cosmetic Dentist(IAACD). 4th August 35 & paper presentation Dr Nadirafrom the Department of Esthetic dentistry won 2014 competition the best paper and Dr.Sarikafrom the Department of Conservative Dentistry and Endodontics was the runner up.

Organized by MSRUAS on WHO theme of “Raise Tobacco Tax, Lower Death and Disease” I prize - Dr Nidhi Gupta, dept. of Conservative and World No Tobacco Day Endodontics. 36 31st May 2014 - 2014 : Essay II prize - Dr Ankit Saxena, dept. of Oral Medicine and Competition Radiology. III prize - Dr Sanketh, dept. of Oral Pathology.

MICAV - 2014 competition organized by DRDO – NAL. The Faculty of Engineering and Technology (FET) at MSRUAS has 8-11 January developed fully Autonomous Quadcopters. The drones 37 MICAV - 2014 2014 developed by Unmanned Air Vehicle (UAV) research team at FET, are capable of navigating itself from one location to another using GPS data.

231 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Indian Pharmaceutical Students from the Faculty of Pharmacy have 20-22 38 Congress presented 16 papers in 65th IPC conference December 2013 (2013) at New Delhi.

Triumphant students of Faculty of Hotel Management and Catering Technology, Bangalore, were declared OVERALL WINNERS at Advitiya, Technical Fest KLE the Technical Fest held at KLE College. The 39 unknown College, Hubli winners were Anand ( Bakery art) , Sreesudha (Linen Art), Moksha( Best from Waste) , Heena Khan (Vegetable Carving ) and Rohan and Shelley ( The Quiz ).

Mr. Sri Harsha Chalasani, Asst. Professor, Department of Pharmacy Practice, Faculty of February 22-23, 7th Pharmaceutical Care 40 Pharmacy has bagged the "BEST POSTER 2017 Conference, Muscat PRESENTATION" award at 7th Pharmaceutical Care Conference

232 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Fifth and Sixth year Pharm.Dstudents of Faculty World Congress-2016, St. of Pharmacy participated in the events of John’s Medical College INDUSEM (India-United States Emergency Hospital, Bengaluru Medicine) WORLD CONGRESS – 2016 and won October 22-23, 41 1st and 2nd prizes in four events. The events 2016 Simulation: I Prize were organised by the Accident and Emergency Street Play: I Prize Medicine, MSRMH and students from GEF (M) Pick & Speak: II Prize institutions participated E- Poster: II Prize

65th Indian Pharmaceutical Students from the Faculty of Pharmacy have 20-22 Congress 2013 is being 42 presented 16 papers in 65th IPC conference December, 2013 hosted by the IPGA at Amity (2013) at New Delhi University, Noida

RUAS Innovation Challenge Four teams from Faculty of Pharmacy (FPH) in 43 8th March 2018 2018, Ramaiah University of collaboration with FHMCT have participated in Applied Sciences first round of evaluation

233 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

Innovative Cocktail Challenge 1st prize - Vijaykant(2014) Innovative flower arrangement 2nd prize - Kiran 5tth to 9th Feb AIMS Hospitality Week Kumar Reddy and Hazel Carolyn (2014) 44 2018 Acharya College Hotel Case Study 2nd Prize - Ankith and Suryah (2015) Destination Marketing 2nd Prize - Puneeth (2015)

Turas 2018 St Josephs Quiz First place - Sudamsh (2015) and Abhishek 45 5th Feb College Gowda (2017)

#ProMillets - the Millet Product Display Challenge Manaswi -Gold, 21st January for Young Chefs at the Siddharth G and Santhosh P -Silver, 46 2018 Organics and Millets 2018 - Suryah and Vinith -Bronze International Trade Fair held Gowri –Bronze in Palace Grounds,

234 © Ramaiah University of Applied Sciences Student Technical and Innovation Competitions S. No. Dates Event Details Photos Eva Mariam, Hazel Carolyn, Kiran Kumar, Krishna K. Menon and Vinith Veerappawere the participants representing FHMCT at the ChandiwalaHospitality Ensemble competition. The students were tested on 2017, hosted by the Banarsidas their technical skills through competitions 11th to the 13th ChandiwalaInstitute of Hotel 47 on management skills, culinary aptitude, of October 2017. Management & Catering bartending and designing. It was a learning Technology, New Delhi-. experience for our students and a proud National inter-collegiate event moment when they were judged overall 7th among the 42 colleges that came from across the nation

Treasure Hunt-1st place- Kinjalk, Joyraj, Tilak Napkin folding-1st Place- Samyukta Mind bogglers-1st place- Dawood, Krishna, 16 and 17 March Technical Events – Vinuthna, Hazel 48 2017 T John Hotel Management College Entertainment quiz- 1st place- Samyukta, Joyraj Entertainment quiz- 2nd place -Tilak, kinjalk Solo dance-2nd place- Krishna Menon Pot painting-2nd place- Eva Towel art-2nd place - Anvitha Culinary Competition - 1st Place- Mr. Varun Raj & Mr. Surjith S. Best Manager - 1st Place - Ms. Madhuri V. "Catafete - 2016" Intercollegiate Food and Beverage Service - 1st place - Mr. technical competitions conducted - 49 5th March 2016. Nishant S. Army Institute of Hotel Bakery Competition - 2nd place - Ms. Management, Bangalore Vaishnavi Kantak Best House Keeping - 2nd Place - Ms. Sree 235 © Ramaiah University of Applied Sciences Sudha Student Technical and Innovation Competitions

S. No. Dates Event Details Photos

FHMCT has won the Overall Winners Trophy

Quiz - First place (Sree Sudha, VIII Sem and “CONCOUR 2016", Madhuri "intercollegiate technical Culinary Competition - First Place -Surjith VIII 50 Feb 2016 competitions - KLE Society's Sem and Lakshmi Narayan S. Nijalingappa College, Towel Art - First Place -Sree Sudha Bangalore. Cocktail Making - First Place -Nishant S Group Discussion - Second Place (Madhuri Best Out of Waste - Second Place -Vaishnavi Kantak

Culinary-Competition and 19th and 20th The Culinary Skills and The Culinary Quiz 51 Expo, Bangalore" held in February 2016 competitions. -1st Prize -Mr. Viren Nebhwani Acharya College, Bangalore. and Mr. Varun

Overall Winners at The Fest Bakery Art- Anand Technical Fest held at KLE Linen Art- Sreesudha 52 Feb 2015 College-Creativity and Best from Waste- Moksha Innovation. Vegetable Carving- HeenaKhan The Quiz- Rohan and Shelley 236 © Ramaiah University of Applied Sciences Faculty Projects-2017-18 1. Development of Micro -Gasturbine 2. Development of 5 kg Payload Quadcopter 3. Development of IC Engine Powered Fixed wing Aircraft 4. Development of 2 seater Electric Car 5. Development of Agri-robot 6. Development of water purifier to purify Brackish water into potable water

237 © Ramaiah University of Applied Sciences Faculty Projects-2018-19 • Development of 100 N Thrust Jet engine • Development of 100 kg Payload Hexa-copter as Ambulance • Development of Bionic Arm • Air Pollution Controller (Low Altitude CO, CO2, NOx and PM Absorption Plates from Atmosphere in Cities to keep the Air Clean) • Humanoid Robot • Dynamic Charging of Electric Cars • Synthetic Aperture Radar • Domestic Water Treatment and Recirculation Unit • Magnetic Levitator for a Toy Train (50 m) • Hyperloop

238 © Ramaiah University of Applied Sciences 1st Annual PG Students Group Projects Exhibition (University)

239 © Ramaiah University of Applied Sciences 2nd Annual PG Students Group Projects Exhibition

240 © Ramaiah University of Applied Sciences 3rd Annual PG Students Group Projects Exhibition

241 © Ramaiah University of Applied Sciences 18. Transferable Skills and Leadership Development (TSLD)

242 © Ramaiah University of Applied Sciences Debate/Quiz/Essay Competitions

Competition Organisers Year Conducted at RUAS Team Status

The Big Debate NHRDN Wednesday, 7th Christ University Runners Up December 2016

The InQuizzitive Mi Career Launcher 9th September 2017 RUAS University Four teams nds (National Level and 11th November Campus and qualified to City Competition) 2017 Baldwin Boys High Level Finals. One School team qualified to Regional Finals (Karnataka region)

243 © Ramaiah University of Applied Sciences Debate/Quiz/Essay Competitions

Competition Organisers Year Conducted at RUAS Team Status

National level Manipal University 29th and 30th Manipal University The teams were parliamentary November and 1st Campus, Manipal placed in the 11th debate October, 2017 position out of the competition 30 teams that participated.

244 © Ramaiah University of Applied Sciences Debate/Quiz/Essay Competitions

Competition Organisers Year Conducted at RUAS Team Status

Model UN SRM University, 9th, 10th and 11th SRM, Chennai We had sent a delegation Conference Chennai February 2018. comprising 10 students from FET and FAD.

One delegate won ‘High Commendation’ Award with a cash prize of Rs.6,000/-

Two delegates won ‘Honourable Mention’

245 © Ramaiah University of Applied Sciences Activities - TSLD

Motivational workshop by TalentEase Guest Lecture by Mr. Dinakar Murthy on Team building as part of induction to MBA “Developing Core Competency”

Guest Lecture by Prof Chennagiri Guest Lecture by Mr. S V Dattatri on Guest Lecture by Dr. Babu Krishnamurthy Gopinath on “Creativity at Work” “Happiness and Success” on “Student and Spirituality”

246 © Ramaiah University of Applied Sciences Dramatics Club

Interactive Sessions with Mr M K Shankar and team Osage

247 © Ramaiah University of Applied Sciences Quiz Club Quiz Preliminary Round

Quiz Boot Strap Camp

248 © Ramaiah University of Applied Sciences 19. International Collaborations and Partnership Management(ICPM)

249 © Ramaiah University of Applied Sciences International Collaborations and Partnership Management

• The objectives of the Directorate are: – Develop Collaborations with International Universities – Facilitate Semester Abroad, 3+1+1, Study Abroad, Study in India Programmes for students – Facilitate contact between University Researchers with Researchers of Foreign Universities – Facilitate Faculty Exchange and short time visit of faculties to other Foreign Universities

250 © Ramaiah University of Applied Sciences International Collaborations and Partnership Management

Director-ICPM [email protected]

K. R. Narasimha Rashmi Koppar Ms. Lyubov Kulikovich [email protected] Murthy [email protected] Asst. Director [email protected] Asst. Director Asst. Director European and African Russian Universities US Universities Universities

251 © Ramaiah University of Applied Sciences International Collaborations 1. University of Illinois, Chicago : Semester Abroad, 3+1+1 2. University of Illinois at Urbana Champaign, at Chicago (UIUC, UIC)-Semester Abroad, 3+1+1 3. Michigan Technological University (MTU)-Semester Abroad, 3+1+1 4. Oklahoma State University, Still Waters, Oklahoma, US : Joint Research-Water Resources and Pollution 5. Kazan National Research Technical University, Kazan, Russia- Joint Research and Product Development-Composites 6. St. Petersburg State University of Architecture & Civil Engineering, St. Petersburg, Russia: Civil Engg.- Student Exchange 7. St. Petersburg State University of Industrial Technologies and Design, Russia-Student Exchange 8. Peter the Great St. Petersburg Polytechnic University, Russia - Student Exchange 9. Moscow State University of Civil Engineering (National Research University), Russia - Student Exchange 10. Coventry University, UK : Student Exchange, Joint Programmes-PG/PhD 11. University of Bedfordshire, UK : Student Exchange –MBA 12. University of Grimsby, UK : Student Exchange –MBA 13. Institut Polytechnique des Sciences Avancées (IPSA), France: Student Exchange 14. Air force Institute of Technology, Nigeria- Training of Airforce Officers 15. Ghana Technology University College, Ghana; Joint Programmes-PhD programmes 252 © Ramaiah University of Applied Sciences Study Abroad

2014-15 2015-16 2016-17 2017-18 Total FET 00 07 25 28 60 FAD 00 00 00 00 00 FMC 00 00 05 00 05 FSH 00 00 00 00 00 FDS 00 00 00 00 00 FPH 00 00 00 00 00 FHMCT 00 00 13 02 15 Total 00 07 43 30 80

253 © Ramaiah University of Applied Sciences 254

©M. S. Ramaiah University of Applied Sciences Study Abroad International Student Exchange Programme • 12 Pre - Doctoral Proposals proposed by FET, MSRUAS for Aquitaine – Karnataka Student Exchange Scheme have been Selected • One MSRUAS student – Mr. Jay Kalina from FSH has received grants to visit Bordeaux University, France for a period of 6 months • 13 students from FHMCT visited France, Belgium and Netherlands to learn about European Food and Beverage and culture • Two students from FHMCT, Mr. Rohan Shah and Mr. Yogesh Achari have been selected to intern at , Hotel Ravenala Altitude, Mauritius for a period of 6 months.

255 © Ramaiah University of Applied Sciences 20. Faculty and Academic Leadership Development

256 © Ramaiah University of Applied Sciences Faculty and Academic Leadership Development Cell

• The objectives of this Cell are: – Train new faculty members on Academic Practices of the University – Train Faculty members on new topics, tools, techniques, processes in academics – Train Faculty members on academic leadership positions like Heads of Departments, Deans, Registrars, Directors, Centre Heads, Heads of Cells – Organise prestigious lectures for students and members of faculty

257 © Ramaiah University of Applied Sciences Faculty and Academic Leadership Development

Head/Associate Head-FALDC

Organise Faculty Development and Leadership Programmes for

Group-1 Group-2 Group-3 Group-4 Deans, Associate Deans HODS and Senior Associate Professors and Directors and Academic Registrars Professors Assistant Professors Administrative Heads

Prestigious/Guest Lectures Faculty, Staff and Students

258 © Ramaiah University of Applied Sciences Faculty Development

• Workshop on Teaching & Learning Methods was conducted by the Vice Chancellor • This workshop was conducted to bring in uniformity in assessment procedures across the University

259 © Ramaiah University of Applied Sciences Faculty Development -Workshop

A one day Faculty Development Workshop on Teaching & Learning Methods was conducted by Prof. Eugene Lai, Nottingham Trent University, UK. During 26th June-2015, Staff members from Faculty of Dental Sciences, Pharmacy, Hospitality Management & Catering Technology attended the workshop. He also conducted a programme on 5th February 2016

260 © Ramaiah University of Applied Sciences Faculty Development-Workshop

A one day Faculty Development Workshop on Teaching & Learning Methods was conducted by Dr. Gurmail Singh, Nottingham Trent University, UK and Dr. Leburn Rose, London South Bank University, UK on 26th June 2015. Staff members from Faculty of Engineering & Technology, Art & Design, Management & Commerce, Science & Humanities attended the workshop. They also conducted a programme on 5th February 2016

261 © Ramaiah University of Applied Sciences Faculty Development-Continuing Education Programme

All the faculty members of MSRUAS participated in Faculty Development Programme conducted at respective faculties during the month of July - August 2015. The Deans of each faculty organized the Faculty Training Programme (FDP) as a part of continuing Education programme on Relevant Academic topics which would enable the faculty members to enrich their knowledge and understanding.

262 © Ramaiah University of Applied Sciences Research & Innovation Council Meeting

The Research and Innovation Council (RIC) meeting was organised by the Research Division on 1st August 2015.

263 © Ramaiah University of Applied Sciences Discussions on Developing Proposals for Research Grants

Dr. S.R. Shankapal, VC, and Dr. Govind Kadambi, PVC-Research discussing with all concerned on writing relevant research proposal for research grants

264 © Ramaiah University of Applied Sciences Workshop on Writing Research Proposals for Research Grants

Dr. Peter White, Professor Emeritus, Coventry University, UK Training faculty members on how to write a good research proposal for award of research grants -17th January 2015

265 © Ramaiah University of Applied Sciences Reviewing of Project Proposals

A research review committee is reviewing research proposals prepared by members of faculty – 1st July to 31st July 2015

266 © Ramaiah University of Applied Sciences Writing Good Research Manuscripts and Publishing in Indexed Journals

Dr. Gautham M.S. Dr. Pradeep B. S.

Dr. Gautham M.S. Nad, Dr. Pradeep B.S., Professors at NIMHANs, training members of faculty on how to write good research papers to publish indexed Journals

267 © Ramaiah University of Applied Sciences How to Write Good Manuscripts and Publish in High Impact Factor Journals

Prof. B.N. Raghunandan, IISc and Prof. Peter White, Coventry University, U.K. delivered the training in two separate sessions. Prof. Raghunandan highlighted the important issues of Publishing along with explaining the criticality of Impact Factor of the Journals. Prof. Peter White demonstrated the procedure to identify the best journals in a particular field with the available SCOPUS powered SCImago website and shared some good manuscripts.

268 © Ramaiah University of Applied Sciences Interaction with Multi – Disciplinary Academic Teams

Prof. Owen Carmichael, Pennington Biomedical Research Center, LA Interacting with Doctors, Engineers, Pharmacists, and Dentists during the interactive session organized to arrive at contemporary research problems in Biomedical Engineering 5th and 6th January 2016

269 © Ramaiah University of Applied Sciences Interaction with Multi – Disciplinary Academic Teams

Dr. V. Prakash, Distinguished Scientist, former Director CFTRI-CSIR, Mysore, Interacted with Faculty members of Pharmacy, Dental Sciences, Hospitality Management, MSR Indic Centre and Medical College on contemporary research Topics in Pharmaceuticals, Ayurceuticalsand Nutraceuticals on 27-01-2016

270 © Ramaiah University of Applied Sciences Workshop on IPR and Patenting

Mr. Om Prakash Sringeri, MD of OM Patents training members of faculty on IPR and Patenting November 27th and 28th 2015

271 © Ramaiah University of Applied Sciences Faculty Exchange

Dr. Rahul Cadambi & Mr. Harsha Patil, faculty members from Department of Mechanical & Manufacturing Engineering of Faculty of Engineering & Technology visited Kazan National Research Technical University, Russia during the month of May 2015 and had an extensive training in the field of Composite Materialsand Technologies. A Team of 6 Professors from KNRTU spent One week at MSRUAS from January 19th 2015 onwards

272 © Ramaiah University of Applied Sciences Faculty Exchange

Dr. H.M. Rajashekhar Swamy & Mr. Santhosh H.P., faculty members from Department of Civil Engineering of Faculty of Engineering & Technology visited Saint Petersburg State University of Architecture and Civil Engineering (SPSUACE), Russia during the month of June 2015 and had an extensive interaction in the field of Metal Structures and other Laboratories Two Lady Professors from Saint PetersburgState University of Architecture and Civil Engineering (SPSUACE) spent a Week at MSRUAS from March 25th 2015 onwards 273 © Ramaiah University of Applied Sciences Best Paper Award 2015 honored by UNESCO and IMRF

Mr. Rakesh C. (Asst. Professor - FMC) participated in a conference organised by the United Nations Educational, Scientific Cultural Organization(UNESCO) and International Multidisciplinary Research Foundation (IMRF) on 9th and 10th October,2015 at Vijayawada, Andhra Pradesh, India. There were approximately 110 paper presenters from different disciplines and his presentation got selected for “Best Presentation Award-2015” honored by UNESCO and IMRF.

274 © Ramaiah University of Applied Sciences Best Paper Award at 12th IEEE India International Conference INDICON

17 December 2015 to 20 December 2015 Ms. Anusha Vadde and Mr. V. S. N. Sitaram Gupta, Asst. Professors from Faculty of Engineering and Technology have bagged the "BEST PAPER" award at 12th IEEE India International Conference INDICON 2015 held at Jamia Millia Islamia, New Delhi

275 © Ramaiah University of Applied Sciences Faculty of Dental Sciences

Dr Sivaranjani Gali won the Dr Pushpanjali presented prize poster Paffenbarger award at the Academy at World Summit on Social of Dental Materials Annual meeting at Accountability was organized by Chicago, Illinois on 13th -18th October Towards Unity for Health (TUFH) in 2016 First Indian to Receive this Hammamet, Tunisia on 8th – 12th April Award 2017

Dr Shruthi presented poster at 2nd Dr Rakesh N won the Best Paper International Scientific conference Award at European Congress of International conference of Oral and Maxillofacial surgeon “Science for Future” Russia on 20th - 23rd Dentomaxillofacial Radiology at –Hongkong , 2017 By Dr.Ahmed Elham , Dr.Abhishek th th September 2016 Cardiff on 15 -18 June 2016 Nandavar

276 © Ramaiah University of Applied Sciences Faculty of Dental Sciences

Dr Latha Anandakrishna was awarded the Dr Vinod and Dr Sharanya presented at Best Poster at International Sugar Symposium Dr Madhu presented at International Conference 2nd SAARC Orthodontic conference held Is sugar the new tobacco?- Oral Health on Dentistry- Dental 2017 at Dubai UAE 3rd- at Kathmandu, Nepal on 15th – 17th May Perspectives at New Delhi on 11th November 5th April 2017 2017 2016

6th World Congress International Academy Of Oral Oncology (IAOO) , 17th To 20th May 2017 held at Shangri- La Bengaluru, India.

277 © Ramaiah University of Applied Sciences Faculty of Pharmacy

V and VI year Pharm D students of Faculty of Pharmacy, ‘The Best Paper for Poster Presentation’ along RUAS participated in the events of INDUSEM (India-United with a cash prize of Rs. 10000/-, won by M. States Emergency Medicine) WORLD CONGRESS – Pharm (Pharmacology) student Ms. Qhuba 2016 on 16.10.2016 and won 1st and 2nd prizes in four Nasreen at the 1st Pharmaceutical Science events. The events were organised by the Accident and Congress conducted at our University during Emergency Medicine, MSRMH and students from GEF (M) 18th and 19th March, 2017. cash prize of Rs. institutions participated. 10000/

Ms. Kanika Kaushik was awarded the best poster in pharmacy practice category for the Mr. Arjun Jadhav. S was awared for Development of research work entitled Salbutamol Sulphate Embedded Transmucosal Nasal “Levonorgestrol Induced Breast Enlargement: Inserts. Funding Agency: Vision Group of Science & Data Mining in Public Version of FDA AERS Technology (VGST), Govt. of Karnataka under SPiCE Database” in ALPHACON– 2017, National category for Post graduate Research, cash prize of conference held at Al-Ameen college of Rs. 30000/ Pharmacy

Mr. Subeesh K Viswam, Asst. Professor, Dept. of Mr. Sriharsha Chalasani, Asst. Professor, Dept. of Pharmacy Practice,Faculty of Pharmacy participated Pharmacy Practice, Faculty of Pharmacy has and won the Best Scientific Paper Award for the paper participated and won the Best Poster Award entitled “Vortioxetine induced agitation and anger: as “First Winner” at 7th Pharmaceutical Care Generating safety signals by data mining in FDA AERS Conference conducted at Muscat, Sulanate of database” at International Society for Oman, 22nd & 23rd February 2017 for the poster Pharmacoeconomics and Outcomes Research (ISPOR), entitled “Assessment of Medication Errors in the Thirupati Chapter, 21st & 22nd April 2017, Tirupati, Intensive Care Unit in a developing country’s Andhra Pradesh. Tertiary Care Teaching Hospital”.

278 © Ramaiah University of Applied Sciences Best Paper Award at National Women’s Science Congress

Dr. Jyotsna Kumar, Asst. Professor, Department of Chemistry, Faculty of Science & Humanities has bagged the "BEST PAPER" award at National Women’s Science Congress held at Veterinary College, Hebbal, Bengaluru during 7 - 8 November 2015.

279 © Ramaiah University of Applied Sciences National Education Leadership Award 2015

Prof. S. R. Shankapal, Vice Chancellor, M. S. Ramaiah University of Applied Sciences received prestigious 'National Education Leadership Award 2015' from Vijayavani for Outstanding Contribution to Education on 12 September 2015 at Vivanta by Taj, Bengaluru.

280 © Ramaiah University of Applied Sciences National Education Leadership Award 2016

Prof. S. R. Shankapal, Vice Chancellor, M. S. Ramaiah University of Applied Sciences received prestigious 'National Education Award' by ABP News for outstanding contribution to Education on 23 June 2016 at Mumbai.

281 © Ramaiah University of Applied Sciences Lifetime Achievement Award in Antenna Engineering

Prof. Govind R. Kadambi, Pro-Vice Chancellor (Research) – MSRUAS received a Lifetime Achievement Award in Antenna Engineering during Contemporary Academic Meet of VICAM – 2016. The award was given to Prof. Govind R. Kadambi by Hon’ble Justice Vallinayagamalong with the Board of Trustees of Venus International Foundation at Chennai, Tamil Nadu.

282 © Ramaiah University of Applied Sciences Faculty Development Programmes Organised

2014-15 2015-16 2016-17 2017-18 Total

FET 08 09 30 35 82

FAD 08 09 07 1 25

FMC 08 06 03 1 18

FSH 08 05 05 15 33

FDS 08 03 03 10 24

FPH 08 10 04 3 25

FHMCT 08 07 07 7 29

Total 56 49 59 72 236

283 © Ramaiah University of Applied Sciences Faculty Members Supported for Higher Studies

2014-15 2015-16 2016-17 2017-18 Total

FET 13 6 11 14 44

FAD 0 0 2 1 3

FMC 3 1 2 3 9 FSH 0 1 0 0 1 FDS 8 3 6 0 17

FPH 5 2 0 4 11 FHMCT 0 0 0 2 2

Total 29 13 21 24 87

284 © Ramaiah University of Applied Sciences Faculty Members Supported for Conferences/Training 2014-15 2015-16 2016-17 2017-18 Total FET 29 39 51 35 154 FAD 4 4 0 0 8 FMC 1 2 75 3 81 FSH 8 8 6 19 41 FDS 60 62 55 31 208 FPH 2 18 4 16 40 FHMCT 0 0 6 0 6 Total 104 133 197 104 538

Names of Conferences Attended 2014-15 2015-16 Details attached as an Annexure 2016-17 2017-18

285 © Ramaiah University of Applied Sciences 21. Prestigious Lectures at RUAS

286 © Ramaiah University of Applied Sciences Prestigious Lecture Series

Dr. A.S. Kiran Kumar, Chairman, Indian Space Research Organisation (ISRO) delivered the first Prestigious Lecture on the topic “India in Space Age” during the first anniversary function of MSRUAS.

Date: March 17, 2015

287287 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Prestigious Lecture Series

Ramaiah University of Applied Sciences organized a Prestigious Guest Lecture by Dr. M. Annadurai (Padmashri Awardee – 2016), Distinguished Scientist and Director of ISAC on the topic “Science and Technology in India: A Critical View”. Dr. M. Annadurai shared his learnings at ISRO and key challenges faced in handling Chandrayaan - 1 and Mars Orbiter Mission. All Faculty members and students from the University actively participated in the Prestigious Guest Lecture.

Date March 17, 2017

288288 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Prestigious Lecture Series

Dr. Devdutt Pattanaik, a renowned expert on Mythology, delivered a Prestigious Lecture on “How Mythology Can Be Studied to Enhance Knowledge”.

Date: October 13, 2017

289 © Ramaiah University of Applied Sciences Prestigious Lecture Series

Sadhguru Jaggi Vasudev visited the Ramaiah Campus and interacted with students and faculty.

Date : November 20, 2017

290290 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences Prestigious Lecture Series Dr. Bertrand Piccard is a renowned Environmentalist, Global Influencer, and Architect of ‘Solar ’ – the first of its kind aircraft fuelled by solar power, which flew 25,000 miles to promote the usage of renewable and clean energy. In his Lecture, Dr. Piccard stressed on the importance of innovation, creativity, pioneering spirit, and passion for exploring unchartered territory. RUAS organized a interaction session with students and faculties at campus .

Date : January 12 , 2018.

291 © Ramaiah University of Applied Sciences Leadership training programme on “Transformational Leadership to Achieve Excellence at RUAS” With the intention to imbibe leadership qualities amongst each and everyone, a leadership programme called “Transformational Leadership toAchieve Excellence at RUAS” was conducted atvarious levels. The leadership training highlighted different types of leadership namely engage, enable, enact, encourage and evaluate. Prof. Ramaprasad with his forte in the field of higher education analyzed the function, aspirations and outcome of RUAS at present and in next 10 yrs. The training stressed on the importance of researchin the field of higher education.

Dates: 24th,29th and 30th January2018

292292 ©©M. Ramaiah S. Ramaiah University University of Applied of Applied Sciences Sciences 22. Human Resources Policies and Staff Appraisal

293 © Ramaiah University of Applied Sciences HR -Policies

• MSRUAS-Employment Regulations http://www.msruas.ac.in/university/hrd

294 © Ramaiah University of Applied Sciences Seminars/Conferences Participation

• Staff Members are entitled for – Seminar/Conference Registration Fee – Travel Allowance in third AC – Subsistence Allowance

At an average of more than 50 faculty members avail such benefits annually

295 © Ramaiah University of Applied Sciences Performance Based Appraisal System (PABS)

• Quantity Parameters - Teaching and Research Staff (http://www.msruas.ac.in/university/hrd) – To be more specific and deterministic, work load distribution for the year has been done. The activities of a Teaching and Research staff has been classified into 08 different heads and the hours to be spent under each head is arrived at. The staff members need to note the hours in each head and fulfil the same. • Quantity Parameters - Administrative and Technical Staff (http://www.msruas.ac.in/university/hrd) – All the Administrative and Technical staff members of the University should fulfil overall 1800 hours for the year categorised under various heads

• Quality Parameters (http://www.msruas.ac.in/university/hrd) • Overall Grade

296 © Ramaiah University of Applied Sciences Faculty Appraisal Grade Card Sample

297 © Ramaiah University of Applied Sciences Staff Grievances and Redressal Cell

• Such of those staff members who have any grievances can submit a filled up form stating their grievances • Such Filled up application form be submitted to the head of the Cell – Chief Manager - HR • Grievances will be addressed by “ Staff Grievances and Redressal Committee” with in a month submitting the filled up form • Staff Grievances and Redressal Form can be downloaded from the University website http://www.msruas.ac.in/staff

298 © Ramaiah University of Applied Sciences 23. Support from Industries & Businesses

299 © Ramaiah University of Applied Sciences National Collaborations • ABB • Mann + Hummel Pvt. Ltd. • Bharath Electronics • Bangalore Integrated Systems Solutions • Palladion Networks Private Limited • National Design Research Forum (NDRF)-Bangalore • Consortium of Electronic Industries Karnataka (CLIK)-Bangalore • Institute for Drug Delivery and Biomedical Research (IDBR)-Bangalore • Karnataka State Higher Education Council • Genotypic Technologies Private Limited • Enliven Technologies Pvt. Ltd. • Microlabs

300 © Ramaiah University of Applied Sciences TIFAC CORE in DIGITAL IMAGE PROCESSING

301 © Ramaiah University of Applied Sciences PACE

• PACE –Design Studio at MSRUAS (9th March 2015) • PACE-Partners for the Advancement of Collaborative Engineering Education

302 © Ramaiah University of Applied Sciences Donations to Laboratory

303 © Ramaiah University of Applied Sciences GM

• GM has donated a number of Engines, Automotive Components and Vacuum Forming Machine

304 © Ramaiah University of Applied Sciences 24. Public Relations and Publicity

305 © Ramaiah University of Applied Sciences Public Relations and Publicity • The main activities of the Directorate are – Developing Marketing Materials and Brochures – Marketing University Academic Programmes – Advertisements and Publicity Activities through Press and Media

306 © Ramaiah University of Applied Sciences University Video

Teaser

307 © Ramaiah University of Applied Sciences 308 © Ramaiah University of Applied Sciences 25. Social Media

309 © Ramaiah University of Applied Sciences Social Media Cell

Head/Associate Head

Main Objectives: Publish News on Social Media on a Daily Basis • University News • Faculty News • Departments News • Research Centres • Student Affairs • Directorate News • News from various Centres and Cells

Pavan Yadav [email protected] Social Media

311 © Ramaiah University of Applied Sciences 26. Rural Development Cell

312 © Ramaiah University of Applied Sciences New Projects

• Will setup Rural Development Cell – Adopting a Village for Complete Development – Already we are working in Kaiwara where we have setup Dental Clinic

313 © Ramaiah University of Applied Sciences Thank You

314 © Ramaiah University of Applied Sciences