DOCSLIB.ORG

Magnetic Properties of Synthetic Mischmetal Alloyed with Cobalt, Copper, Iron, and Magnesium

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Magnetic Properties of Synthetic Mischmetal Alloyed with Cobalt, Copper, Iron, and Magnesium PLEASE 00 NOT REMOVE FRCM LIBRARY IRIL _ _ 1i'--8810__ ---' Bureau of Mines Report of Investigations/1983 Magnetic Properties of Synthetic Mischmetal Alloyed With Cobalt, Copper, Iron, and Magnesium By J. W. Walkiewicz. M. M. Wong. and E. Morrice UNITED STATES DEPARTMENT OF THE INTERIOR Report of Investigations 8810 Magnetic Properties of Synthetic Mischmetal Alloyed With Cobalt, Copper, Iron, and Magnesium By J. W. Walkiewicz, M. M. Wong, and E. Morrice UNITED STATES DEPARTMENT OF THE INTERIOR James G. Watt, Secretary BUREAU OF MINES Robert C. Horton, Director Library of Congress Cataloging in Publication Data: \\ a I k i e wi c z, J. W. (J 0 h n \\,) Magneric properties of synlhetic rnisl:hrncl,ll "lloy"d with "0),,11(, C{)PP<':f) iron, nlhJ magnesium. (Hcport of inves[ig~[inns / lJnilcJ Siales Departrnenl "f lh~ Illlcri­ or, Hure"u of Mines: 8810) Bibliography: p. 13. Supt. of Due." no,: I 28.23:8810, 1. Misehnlc[al-MOlglll:tic prorerti,'s, 2. Magneli,' "llo"s. l. Wong, M. M. (Morton Min), 1924- II, Morrice, I':. (hl\\'"r"). III. rirl<:. IV •.:-;crirs: Hcporr of invesrigarions(l'nire,j :-;lOlICS. !lurc"" of Mines): H810. TN23.U43 [TNfl93.R31 fl22s I fl20. ! 'H9291 83fj0022R CONTENTS Abstract ••••.•••••••..•..••••••••.•••••...••.••...•••••••....•••••..••••••••.•• Introduction................................................................... 2 Experimental procedures and equipment............................... ••..••..... 3 Alloy preparation......................................................... 3 Powder preparation........................................................ 3 Alinement and compaction.................................................. 4 Sintering................................................................. 4 Magnetic property measurements..................................................................................... 4 Results and discussion......................................................... 4 Magnetic propel,ties of M50-Co-Cu-i'lg....................................... 5 Effect of mischmetal content. ••• ••••..• ••••.....•••••....•...•. .••..• 5 Ef fect of copper content............................................. 5 Ef fect of magnesium content.......................................... 5 Ef fect of grinding................................................... 6 Magnetic properties of M30-Co-Cu-Mg....................................... 6 Ef fect of mischmetal content......................................... 6 Effect of copper content............................................. 7 Magnetic properties of M20-Co-Cu-Mg....................................... 7 Effect of mischmetal content......................................... 7 Effect of copper content............................................. 7 Effect of magnesium content.......................................... 8 Ef fect of grinding................................................... 8 Magnetic properties of M10-Co-Cu-Mg....................................... 9 Effect of mischmetal content......................................... 9 Effect of copper content............................................. 9 Magnetic properties of M-Co-Cu-Mg: Effect of lanthanum content........... 10 Magnetic properties of M-Co-Cu-Fe-Mg: Effect of iron content............. 11 Summary •••.••••••••••.•.••••••••••••••••.••••••••••.•.••....•••.••••.•••••.••. 12 References. .••..••••••.•••••.•••.•••••••.••••••••••••••••••••..••••••••. •. ••••. 13 Appendix.--Definitions of basic magnetic properties of a permanent magnet...... 14 ILLUSTRATIONS I, Effect of mischmetal content on the magnetic properties of M50-Co-Cu-Mg alloys. • • • • • • .• . • • • . • . • • . • . • . • • • . • • • • • • • • • • • • • . • • • •• • • • • • . • . • • • • . • 5 2. Effect of copper content on the magnetic properties of M50-Co-Cu-Mg alloys 5 3. Effect of magnesium content on the magnetic properties of M50-Co-Cu-Mg alloys. • . • • • • • . • • • • • • • • • • • • • • • . • . • • • • • • • • . • • • • • • . • • • • • •• . • . • • • • • • . • • 6 4. Dependence of magnetic properties on the comminution time of M50-Co-Cu-Mg alloys. • • • • • • • • . • • • • . • •• • • • • . • . • • • • . • • • • • • . • • • • • • • • • • • • • • • • • • • • • • • 6 5< Effect of mischmetal content on the magnetic properties of M30-Co-Cu-Mg alloys. • . • • . • •• . •• • . • • . • • • • • • . • • . • • • . .. .• . • . • . 7 6. Effect of copper content on the magnetic properties of M30-Co-Cu-Mg alloys 7 7. Effect of mischmetal content on the magnetic properties of M20-Co-Cu-Mg alloys. • • • • • • • • . • •• • • • • • • • • • • . • • • • • • • • . • . • • • • . • . • • • • • • •• . • • • • • • • • • • • • • • 8 8. Effect of copper content on the magnetic properties of M20-Co-Cu-Mg alloys 8 9. Effect of magnesium content on the magnetic properties of M20-Co-Cu-Mg alloys. • • . • • • . • • . • • • • • • • • . •• • • • • • • . • • • • • • • • . • • • • • . • • • • • • • • • • • • •• • • • 8 10. Dependence of magnetic properties on the comminution time of M20-Co-Cu-Mg alloys ......... « •••••••••••••••••••••••••••••• "o •••••• " ••••••••••••••••• 9 11. Effect of mischmetal content on the magnetic properties of M10-Co-Cu-Mg alloys ......... t ......................................................... 9 ii ILLUSTRATIONS--Continued 12. Effect of copper content on the magnetic properties of MIO-Co-Cu-Mg all()ys................................................................... 10 13. Effect of lanthanum llnd copper on the mago<:tlc properties of a 36.5-pct-M allc)y ........ " ................ 10 ..... ,. 41 II> • ,. ,. " • 'II •• If .... , • ,. ...... " • .. • .. • .. • .. • .. • • • .. .. • • • • • 11 14. Effect of lanthanum and copper on the magnetic properties of a 37-pct-M a 110 Y .. ,. ....................... If .... r .. III .......... " ..... " ..................................... 111 " ........... /I 11 ]5. Effect of iron on the magnetic properties of MSO-Co-Cu-Fe-Mg alloys...... 12 16. Effect of iron on the magnetic properties of M20-Co-Cu-Fe-Mg alloys...... J2 A-I. HysterEsis loop of a permanent magnet materiaL.......................... 14 TABLES 1. Composition of M-Co-Cu-Fe-Mg alloys prepared arc melting.............. 3 2. Effect of composition 00 the magnetic properties of H-Co-Cu-Hg alloys.... 10 USED IN THIS REPORT °C degree Celsius MGDe mega-gauss-oersted em ce n t 1me ter MFa megapascal g gram min mi nute h hour \.lm micrometer kG kilogauss pct percent kOe kilooersted psi pounds of force per square inch MAGN ETIC PROPERT IES OF SYNTHETIC MISCHMET Al AllOYED WITH COBALT, COPPER, IRON, AND MAGNESIUM By J. W. Walkiewicz, I M. M. Wong, 2 and E. Morrice I ABSTRACT The Bureau of Mines investigated alloys containing lanthanum (La), praseodymium (Pr), neodymium (Nd), cobalt (Co), copper (Cu), iron (Fe), and magnesium (~g) as possible components of a permanent magnet mate­ rial utilizing a cerium-free synthetic mischmetal (M) as a substitute for scarce samarium (Sm) metal. Magnets containing M-Co-Cu-Mg and M-Co-Cu-Fe-Mg were fabricated by powder metallurgy techniques and evaluated. A synthetic mischmetal (M20) containing 20 pct La, 60 Pr, and 20 Nd yielded the best overall magnetic properties. The M20-Co-Cu-Mg alloys had energy products as high as 13.2 MGOe, rernanences as high as 7.89 kG, normal coercivities as high as 6.26 kOe, and intrinsic coercivities as high as 13.4 kOe. The best value of intrinsic coercivity, 22.9 kOe, was obtained with an M-Co-Cu-Mg magnet in which the synthetic misch­ metal contained 30 pct La, 50 Pr, and 20 Nd. These values compare fa­ vorably with those of the Sm-Co magnets fabricated and measured at the Bureau's Reno Research Center, which had energy product of 15.1 MGOe, remanence of 7.8 kG, normal coercivity of 7.5 kOe, and intrinsic coercivity of 27.4 kOe. Iron substitution for part of the cobalt re­ sulted in a decrease of magnetic properties, although several percent iron can be added before a drastic loss of magnetic properties occurs. 1Metallurgist, Reno Research Center, Bureau of Mines, Reno, Nev. 2supervisory chemical engineer, Reno Research Center, Bureau of Mines, Reno, Nev. (now retired). 2 INTRODUCTION Samarium is a scarce metal which is im­ Even though the addition of copper and portant for Sm-Co magnets in national magnesium to MM-Co increased the coerciv­ defense applications and in energy­ ity, a substantial loss of remanence and efficient electrical devices. The "pre­ energy product occurred. This prompted ferred status" of Sm-Co has created a the Bureau of Mines to conduct an inves­ demand for samarium metal that exceeds tigation to develop a synthetic misch­ production. The need to alleviate the metal (M) with values of remanence and demand for samarium has stimulated re energy product comparable to those of search on (MM,Sm)-Co Cl_, 1,~, lQ-Q) 2 Sm-Co alloys: energy product 15.1 MGOe, and MM-Co (4-5, 8-11) magnets in which remanence 7.8 kG, normal coercivity 7.5 natural mischmetal (MM) replaces part or kOe, intrinsic coercivity 27.4 kOe. The all of the samarium. initial rare-earth mixture of 50 pct La, 30 Pr, and 20 Nd was selected for the The term "natural mischmetal" denotes following reasons: a mixture of the light rare-earth met­ als consisting of 23-27 pct La, 4-7 Pr, 1. Cerium was eliminated because Ce-Co 10-,14 Nd, and 50-55 Ce. This is approxi­ had the lowest theoretical value of mag­ mately the same ratio of rare-earth netization (l, 2), which was confirmed by elements found in natural ore. A previous Bureau research. samarium-free, high-intrinsic-coercivity
Load more

Recommended publications
  • (12) United States Patent (10) Patent No.: US 8,186,995 B2 Putrello, Jr
    US008186995B2 (12) United States Patent (10) Patent No.: US 8,186,995 B2 Putrello, Jr. (45) Date of Patent: May 29, 2012 (54) SURVIVAL TOOL FIRE STARTER WITH 148/404; 44/507,506, 508; 280/87.042: MISCHMETAL FLINTROD 126/25 B; 149/38, 41,42; 7/158 See application file for complete search history. (76) Inventor: Andrew C. Putrello, Jr., Utica, NY (US) (56) References Cited (*) Notice: Subject to any disclaimer, the term of this U.S. PATENT DOCUMENTS patent is extended or adjusted under 35 2,908,071 A * 10/1959 Bungardt ...................... 428,585 U.S.C. 154(b) by 765 days. 3,275,484. A * 9, 1966 Foote et al. ..................... 149,38 3.278,009 A * 10/1966 Crump, Jr. .................... 206,121 4,089,706 A 5/1978 Zeiringer (21) Appl. No.: 12/392,535 4,698,068 A * 10/1987 Jensen ............................ 44,507 6,782.576 B1 8, 2004 Valencic et al. (22) Filed: Feb. 25, 2009 2005/O127630 A1* 6/2005 Kuhlman et al. ........ 280/87.042 (65) Prior Publication Data * cited by examiner US 2009/0214996 A1 Aug. 27, 2009 Primary Examiner — Steven B McAllister Assistant Examiner — Avinash Savani Related U.S. Application Data (74) Attorney, Agent, or Firm — Hiscock & Barclay, LLP (63) Continuation-in-part of application No. 12/070,741, (57) ABSTRACT filed on Feb. 22, 2008. A fire-starter device for Survival or emergency use has a (51) Int. C. handle portion and case portion that twist together, to sheath a mischmetal flint rod inside the case, and a seal ring protects F23O I/02 (2006.01) the flint rod from environmental moisture.
    [Show full text]
  • GLOBAL RARE-EARTH PRODUCTION: HISTORY and OUTLOOK History – the Discovery
    Center for Strategic and International Studies Rare Earth Elements: Geology, Geography, and Geopolitics James B. Hedrick Hedrick Consultants, Inc. U.S. Rare Earths, Inc. Burke, Virginia December 15, 2010 Washington, DC GLOBAL RARE-EARTH PRODUCTION: HISTORY AND OUTLOOK History – The Discovery . The rare earths were discovered in 1787 by Swedish Army Lieutenant Carl Axel Arrhenius . Carl, an amateur mineralogist collected the black mineral ytterbite, later renamed gadolinite, from a small feldspar and quartz mine at Ytterby, Sweden . With similar chemical structures the rare earths proved difficult to separate . It was not until 1794 that Finnish chemist Johann Gadolin separated the first impure yttrium oxide from the mineral ytterbite History – The Discovery History – The Commercialization . The rare earths were commercialized when the incandescent lamp mantle industry was established in 1884 with mantles of zirconium, lanthanum, and yttrium oxides with later improvements requiring only the oxides of thorium and cerium. The lamp mantle was discovered by Baron Carl Auer von Welsbach . The mantles also used small amounts of neodymium and praseodymium as an indelible brand name Welsbach label History – The Early Mining . Rare earths were first produced commercially in the 1880s with the mining in Sweden and Norway of the rare-earth thorium phosphate mineral monazite . Foreign Production Brazil produced monazite as early as 1887 India produced monazite starting in 1911 . Domestic Production Monazite production in the United States was first recorded in 1893 in North Carolina - a small tonnage of monazite was reportedly mined in 1887 Monazite mining in South Carolina began in 1903 History – The Processing . Three main methods for separating and refining the rare- earth elements since they were discovered .
    [Show full text]
  • Producers Case Study the Changing
    Producers Case Study The Changing Geography of Rare Earth Element Production Introduction The locations where rare earth elements are produced changed repeatedly throughout the 1900s and early 2000s. This variation suggests that production is not determined primarily by the geographic location of rare earth ores. Instead, the location of mines and separation plants is driven by a combination of market prices, government policies, and the actions of producers and manufacturers. As a result where and how rare earth elements are produced could change in the future. Initial Rare Earth Metal Production Although a mineral containing rare earth elements was identified in Sweden in 1788, it took more than 100 years for the first significant industrial product to be made using the rare earths. In the 1890s chemist Carl Auer von Welsbach developed a mantle made of a mixture of 99% thorium and 1% cerium for use with gas streetlights. More than five billion mantles were sold worldwide through the 1930s. Welsbach also developed mischmetal, a mixture of rare earth elements cerium, lanthanum, neodymium, and praseodymium. When alloyed with iron, mischmetal produced a metal that sparked when struck. It was widely used in pocket cigarette lighters as well as automobile ignition switches. The Welsbach Company mined rare earth deposits located in coastal sands in Brazil, India, and North Carolina. India’s coastal sands are also rich in the radioactive element thorium, which is not a rare earth element. India banned the export of these sands in 1948 to preserve its thorium supply for a potential nuclear energy program. At that time the price of rare earth metals spiked until newly established mining locations briefly made South Africa the world’s leading exporter of rare earth ores in the 1950s.
    [Show full text]
  • Shark Deterrent and Incidental Capture Workshop April 10–11, 2008
    NOAA Technical Memorandum NMFS-PIFSC-16 November 2008 Shark Deterrent and Incidental Capture Workshop April 10–11, 2008 Compiled and Edited by Yonat Swimmer, John H. Wang, and Lianne McNaughton Pacific Islands Fisheries Science Center National Marine Fisheries Service National Oceanic and Atmospheric Administration U.S. Department of Commerce About this document The mission of the National Oceanic and Atmospheric Administration (NOAA) is to understand and predict changes in the Earth=s environment and to conserve and manage coastal and oceanic marine resources and habitats to help meet our Nation=s economic, social, and environmental needs. As a branch of NOAA, the National Marine Fisheries Service (NMFS) conducts or sponsors research and monitoring programs to improve the scientific basis for conservation and management decisions. NMFS strives to make information about the purpose, methods, and results of its scientific studies widely available. NMFS= Pacific Islands Fisheries Science Center (PIFSC) uses the NOAA Technical Memorandum NMFS series to achieve timely dissemination of scientific and technical information that is of high quality but inappropriate for publication in the formal peer- reviewed literature. The contents are of broad scope, including technical workshop proceedings, large data compilations, status reports and reviews, lengthy scientific or statistical monographs, and more. NOAA Technical Memoranda published by the PIFSC, although informal, are subjected to extensive review and editing and reflect sound professional work. Accordingly, they may be referenced in the formal scientific and technical literature. A NOAA Technical Memorandum NMFS issued by the PIFSC may be cited using the following format: Swimmer, Y, J. H. Wang, and L. McNaughton.
    [Show full text]
  • An Evaluation of Magnetic, Electropositive, and Chemical
    An Evaluation of the Behavioral Responses of Cownose Rays (Rhinoptera bonasus) to Permanent Magnets and Electropositive Alloys Completed by Robert A. Fisher Virginia Institute of Marine Science College of William and Mary Eric M. Stroud and Michael M. Herrmann SharkDefense LLC Patrick H. Rice Consulting Marine Biologist VIMS Marine Resource Report No. 2006-12 VSG-06-14 December 2006 Table of Contents Introduction ......................................................................................................................... 2 Overview of Repellent Technologies.................................................................................. 2 Magnetics ................................................................................................................ 2 Electropositive Alloys ............................................................................................. 5 Methods............................................................................................................................... 7 Experimental Design ............................................................................................... 7 Results Trial 1 – Control Swim Behavior ............................................................................ 9 Trial 2 – Controls.................................................................................................. 10 Trial 3 – Magnetic Treatment ............................................................................... 10 Trial 4 – Controls.................................................................................................
    [Show full text]
  • Changes to Argus Rare Earths Effective 07 April 2016 Argus Will Be
    Changes to Argus Rare Earths effective 07 April 2016 Argus will be updating categories for the following assessments in Argus Rare Earths with effect from 07 April 2016. PA-code Description Old category New category PA0014298 Cerium oxide 99.5-99.9% cif Europe ->Metals - Non-ferrous->Rare Earths->Europe ->Rare earth metals->Cerium->Europe PA0014340 Neodymium metal 99% cif Europe ->Metals - Non-ferrous->Rare Earths->Europe ->Rare earth metals->Neodymium->Europe PA0014341 Neodymium oxide 99.5-99.9% cif Europe ->Metals - Non-ferrous->Rare Earths->Europe ->Rare earth metals->Neodymium->Europe PA0014365 Yttrium oxide 99.999% cif Europe ->Metals - Non-ferrous->Rare Earths->Europe ->Rare earth metals->Yttrium->Europe PA0014378 Cerium carbonate min 45% REO ex-works China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014379 Cerium carbonate min 45% REO fob China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014380 Cerium metal min 99% ex-works China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014381 Cerium metal min 99% fob China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014382 Cerium oxide 99.5-99.9% ex-works China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014383 Cerium oxide 99.5-99.9% fob China ->Metals - Non-ferrous->Rare Earths->Asia-Pacific ->Rare earth metals->Cerium->China PA0014395 Dysprosium metal min 99% ex-works China
    [Show full text]
  • This Document Consists of 4§ Pages, Plus 1 Figure
    Geology aad Mineralogy <* This document consists of 4§ pages, plus 1 figure. Series A UTIITE1J" STATES-DEPARTMENT OF THE INTERIOR GEOLOGICAL SURVEY SELECTED ANNOTATED BIBLIOGRAPHY AND INDEX MAP OF THORIUM AND RARE-EARTH DEPOSITS IN THE UNITED STATES AND ALASKA* By Katharine L. Buck July 1955 TraeeBEiementst Investigations Report 531 This preliminary report is distributed \ without editorial and technical review for conformity with official standards and nomenclature. It is not for public inspection or quotation. *ThisTeport concerns work done on belialf of the Division of Raw Materials of the U. S. Atomic Energy Commission. USGS - TEI -531 GEOLOGY AND MINERALOGY No, of copies Atomic Energy Commission, Washington «, 2 Division of Raw Materials, Albuquerque. 0 1 • Division of Raw Materials, Austin ...... 1 - Division of Raw Materials,, Butte „ . „ . 1 Division of Raw Materials, Casper ...... 1 Division of Raw Materialsc Denver „ 1 Division of Raw Materials, Hot Springs . 1 Division of Raw Materials. Ishpeming . 1 Division of Raw Materials, Phoenix „ . 1 Division of Raw Materials, St0 George . 1 Division of Raw Materials, Salt Lake City .... 1 Division of Raw Materials, Washington „„.«,. 3 . Exploration Division, Grand Junction Operations Office 1 Grand Junction Operations Office,, «„.<,.. 1 Tecfeiical Information Sdtvice, Oak Ridge . 6 TJ8 S0 Geological Survey : Alaskan Geology Branch, Menlo Park „ 2 Fuels Branch, Washington„ „ 0 e 1 Geochemistry and Petrology Branch, Washington » 1 Geophysics Branch, Washington „ 1 Mineral Deposits Branch, Washington ..... 2 P8 C8 Bafemari, Menlo Park ........ 1 A0 L. Brokaw 0 Grand Junction . 1 N0 M8 Denson, Denver 0 . 0 «».«.. 1 C. Ea Dutton, Madison ......... 1 V0 L0 Freeman, College . „ „ . D . 1 R.
    [Show full text]
  • Rare Earths and the Balance Problem: How to Deal with Changing Markets?
    Journal of Sustainable Metallurgy (2018) 4:126–146 https://doi.org/10.1007/s40831-018-0162-8 (0123456789().,-volV)(0123456789().,-volV) REVIEW ARTICLE Rare Earths and the Balance Problem: How to Deal with Changing Markets? 1 2 3 4 Koen Binnemans • Peter Tom Jones • Torsten Mu¨ ller • Lourdes Yurramendi Published online: 9 February 2018 Ó The Author(s) 2018. This article is an open access publication Abstract The balance between the market demand and the natural abundance of the rare-earth elements (REEs) in ores, often referred to as the Balance Problem (or the Balancing Problem), is a major issue for REE suppliers. The ideal situation is a perfect match between the market demand for and the production of REEs, so that there are no surpluses of any of the REEs. This means that the rare-earth industry must find new uses for REEs that are available in excess and search for substitutes for REEs that have either limited availability or are high in demand. We present an overview of the trends in the applications for the different REEs and show that the demand for REEs for use in magnets, catalysts, and alloys is still increasing, while the application of REEs in polishing agents, glass, and ceramics are stable. On the other hand, the use of REEs in nickel–metal-hydride (NiMH) batteries and lamp phosphors is decreasing. These changes in the REE market have an influence on the Balance Problem, because the REEs that can be recycled from fluorescent lamps, cathode-ray tubes (CRTs), and NiMH batteries have to be at least partly reused in other applications.
    [Show full text]
  • Metastable Bcc Mischmetal-Magnesium Alloys Antonio Sabariz Iowa State University
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1-1-1988 Metastable bcc mischmetal-magnesium alloys Antonio Sabariz Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Metallurgy Commons Recommended Citation Sabariz, Antonio, "Metastable bcc mischmetal-magnesium alloys" (1988). Retrospective Theses and Dissertations. 18603. https://lib.dr.iastate.edu/rtd/18603 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Metastable bee mischmetal-magnesium alloys by Antonio Luiz R. Sabariz A Thesis Submitted to the Graduate Faculty in Partial Fulfillment of the Requirements for the Degree of MASTER OF SCIENCE Department: Materials Science and Engineering Major: Metallurgy Signatures have been redacted for privacy Iowa State University Ames, Iowa 1988 ABSTRACT The bee phase in the MM-Mg system can be metastably retained at room temperature for magnesium composition within the range 16 at. % - 20 at. '.L The retention of a lower composition was restricted by quenching rate and at higher concentrations by intermetallic compound precipitati on. The lattice parameter for the pure bee mischmetal phase was 0 determined by extrapolation. The value obtained (aE = 4.131 A) was in 0 good agreement with the theoretical va lue (at= 4. 156 A). Magnetic susceptibi lity data suggested that bee mischmetal-magnesium alloys underwe nt a chan ge from paramagnetic to antiferromagnetic behavior on coo ling at -20 K, independent of magnesium composition.
    [Show full text]
  • Cerium Oxide and Cerium Compounds
    DRAFT - DO NOT CITE OR QUOTE EPA/635/R-08/002 www.epa.gov/iris TOXICOLOGICAL REVIEW OF Cerium Oxide and Cerium Compounds (CAS No. 1306-38-3) In Support of Summary Information on the Integrated Risk Information System (IRIS) May 2009 NOTICE This document is a Final draft. This information is distributed solely for the purpose of pre- dissemination peer review under applicable information quality guidelines. It has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agency determination or policy. It is being circulated for review of its technical accuracy and science policy implications. U.S. Environmental Protection Agency Washington, DC 1 DISCLAIMER 2 3 4 This document is a preliminary draft for review purposes only. This information is distributed 5 solely for the purpose of pre-dissemination peer review under applicable information quality 6 guidelines. It has not been formally disseminated by EPA. It does not represent and should not 7 be construed to represent any Agency determination or policy. Mention of trade names or 8 commercial products does not constitute endorsement or recommendation for use. 9 MAY, 2009 ii DRAFT - DO NOT CITE OR QUOTE 1 CONTENTS—TOXICOLOGICAL REVIEW OF CERIUM OXIDE 2 AND CERIUM COMPOUNDS (CAS NO. 1306-38-3) 3 4 5 LIST OF TABLES .......................................................................................................................... v 6 LIST OF FIGURES ......................................................................................................................
    [Show full text]
  • The Rare-Earth Elements— Vital to Modern Technologies and Lifestyles
    USGS Mineral Resources Program The Rare-Earth Elements— Vital to Modern Technologies and Lifestyles Until recently, the rare-earth elements (REEs) were familiar to a relatively As part of a broad mission to conduct research small number of people, such as chemists, geologists, specialized materials and provide information on nonfuel mineral scientists, and engineers. In the 21st century, the REEs have gained visibility resources, the U.S. Geological Survey (USGS) through many media outlets because (1) the public has recognized the critical, supports science to understand the following: specialized properties that REEs contribute to modern technology, as well as (2) China’s dominance in production and supply of the REEs and (3) inter- • Where and how concentrations of rare- national dependence on China for the majority of the world’s REE supply. earth elements form in the Earth’s crust; Since the late 1990s, China has provided 85 – 95 percent of the world’s • Where undiscovered/undeveloped resources REEs. In 2010, China announced their intention to reduce REE exports. During of rare-earth elements may occur; this timeframe, REE use increased substantially. REEs are used as components in high technology devices, including smart phones, digital cameras, computer • Trends in the supply and demand of hard disks, fluorescent and light-emitting-diode (LED) lights, flat screen rare-earth elements domestically and televisions, computer monitors, and electronic displays. Large quantities of internationally; some REEs are used in clean energy and defense technologies. Because of the many important uses of REEs, nations dependent on new technologies, • How undisturbed and mined rare-earth such as Japan, the United States, and members of the European Union, reacted deposits interact with the environment.
    [Show full text]
  • Effect of Rare Earth Metals, Sr, and Ti Addition on the Microstructural Characterization of A413.1 Alloy
    Hindawi Advances in Materials Science and Engineering Volume 2017, Article ID 4712946, 12 pages https://doi.org/10.1155/2017/4712946 Research Article Effect of Rare Earth Metals, Sr, and Ti Addition on the Microstructural Characterization of A413.1 Alloy M. G. Mahmoud,1 A. M. Samuel,1 H. W. Doty,2 S. Valtierra,3 andF.H.Samuel1 1 UniversiteduQu´ ebec´ aChicoutimi,Chicoutimi,QC,Canada` 2GeneralMotors,MaterialsEngineering,823JoslynAvenue,Pontiac,MI48340,USA 3Nemak, S.A., Libramiento Arco Vial Km. 3.8, 66000 Garcia, NL, Mexico Correspondence should be addressed to F. H. Samuel; [email protected] Received 5 February 2017; Accepted 9 March 2017; Published 16 May 2017 Academic Editor: Patrice Berthod Copyright © 2017 M. G. Mahmoud et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The present work was performed on A413.1 alloy containing 0.2–1.5 wt% rare earth metals (lanthanum or cerium), 0.05–0.15% Ti, and 0–0.02 wt% Sr. These elements were either added individually or combined. Thermal analysis, image analysis, and electron probe microanalysis were the main techniques employed in the present study. The results show that the use of the depression in the eutectic temperature as a function of alloy modification cannot be applied in the case when the alloy is treated with rare earth metals. Increasing the concentration of RE increases the solidification zone especially in Sr-modified alloys leading to poor feeding ability. This observation is more prominent in the case of Ce addition.
    [Show full text]