G1- Microrouter
Total Page:16
File Type:pdf, Size:1020Kb
G1- MicroRouter Multi-Protocol: RS-485 and LonWorks APPLICATIONS G1 MicroRouter connects RS-485 full duplex network to LonWorks FT-10 based network. When loaded with pro- tocol specific app such as the G1-EnOcean it provides powerful and flexible gateway to bring-in (read) sensor information from wireless EnOcean sensors to LonWorks wired network. EnOcean sensors typically harvest energy and do not depend on battery power making them virtu- ally maintenance free. A typical application is to use wireless wall-mounted switches, sensors, etc. in a lighting control application where the lights are controlled by LonWorks devices. LonWorks devices receive the switch commands by the EnOcean wireless link. Another application example is to use LonWorks devices to control HVAC hardware such as VAVs or Fan Coils and the EnOcean wall-mounted temperature sensors. HW Part Number: G1-MicroRouter OVERVIEW Web TITAN touch panel The G1 device is a microprocessor based configurable Trending gateway. Protocol specific apps can be loaded into the gateway. Currently we support an EnOcean app. Refer to the G1-EnOcean App data sheet for more information. Alarming G1 connects by way of straight-through CAT5 patch cord to the antenna. The antenna is specific to the required Scheduling frequency. Standard CAT5 cable connects the VA-BUS port signals from the G1 gateway to the VA-BUS on the anten- LonTalk or BACnet IP over TCP/IP Ethernet or Fiber na. The VA-bus includes several comm. signals and power for the antenna. The antenna is EnOcean specific and fre- Router quency specific. Currently www.echoflexsolutions.com LonTalk and/or BACnet, FT-10 twisted pair offers an antenna for 902MHz frequency for use in the USA. LonWorks devices consum- ing wireless sensor data G1 and antenna EnOcean sensors Quark Communications, Inc. 2033 San Elijo Ave. Ste. 290, Cardiff, CA 92007, USA Phone +1(760) 634 6845 Page 1 http://www.InetSupervisor.com G1- MicroRouter Multi-Protocol: RS-485 and LonWorks I/O CONFIGURATION MECHANICAL There is no physical I/O present on the G1 gateway. This Hardware device is a protocol translation hardware only. Processor FT-5000, 8bits, 80MHz Memory 48k application memory Transceiver FTT-10; 78kbps Transceiver RS-485 full duplex Indicators Green LED, power, status, service pin Comm Ports RJ11, LON, TTL Power Supply Voltage 24VAC; 50/60Hz; Class II Max 30VA Typical 6VA plus peripherals Fuse 1.85A auto-resettable Enclosure Material ABS Color Black Installation 35mm DIN Connectors Removable (Green) Environment Temperature 0°-70°C (32°-158°F) Humidity 0-90% non-condensing Storage -20°- 70°C (-4° - 158°F) (3.4in) (1.4in) AGENCY APPROVALS 70 (2.75in) Safety Certifications CE WARRANTY Standard 2-year warranty. CE RoHS Quark Communications, Inc. 2033 San Elijo Ave. Ste. 290, Cardiff, CA 92007, USA Phone +1(760) 634 6845 Page 2 http://www.InetSupervisor.com .