DOCSLIB.ORG

Wireless & Self-Powered Internet of Things

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Wireless & Self-Powered Internet of Things Wireless & self-powered Internet of Things The Dolphin products are based on miniaturized energy converters, ultra-low power electronics and robust radio technology in open standards like EnOcean, zigbee and Bluetooth Low Energy for OEM product manufacturers. Building automation Smart home LED lighting M2M Our technology The Dolphin modules and white label products use the energy harvesting principle, in which energy is obtained from the surroundings, to supply self-powered wireless sensor networks. The modules are based on miniaturized energy converters that convert motion, light or temperature differences into electrical energy. Together with an efficient energy management system, the energy harvesting technology facilitates communication between maintenance-free IoT devices based on open wireless standards, such as EnOcean, zigbee and Bluetooth Low Energy. The solutions are used in building automation, smart homes, LED lighting control systems as well as industrial applications. Energy harvesting Wireless Ultra-low power The Dolphin portfolio for OEM product manufacturers The Dolphin portfolio includes the product lines “868 MHz EnOcean” for Europe, “902 MHz EnOcean” for North America and “928 MHz EnOcean” in Japan based on the EnOcean wireless standard introduced by the EnOcean Alliance (ISO/IEC 14543-3-1X) on the sub 1 GHz band, which has proven to be a resounding success in building automation and smart homes. The Dolphin porftolio also includes the “2.4 GHz zigbee” product line in the 2.4 GHz band, which can be used in smart home applications all over the world, and the “2.4 GHz BLE” portfolio for Bluetooth systems for modern lighting control. Energy converter Energy harvesting Energy harvesting Controlers Tools wireless switches wireless sensors Products in 868 MHz EnOcean for Europe Products with 868 MHz are suitable for Europe and other countries adopting RED. HIGH RELIABILITY The EnOcean radio standard (ISO/IEC 14543-3-1X) operates in license-free 868 MHz, 902 MHz and 928 MHz frequency bands with 1% duty cycle and a reliable radio range of approx. 30m indoors. INTEROPERABILITY Sensor profiles are standardized to ensure product interoperability across all product manufacturers and to provide interoperable system solution. LOW ENERGY REQUIREMENTS Optimized for self-powered switches and sensors with a high data transmission rate of 125 kbit/s for sensor information. Wireless switch & sensor modules PTM 210|PTM 215 PTM 330|335 PTM 535 Push-button transmitter module with The 4-channel transmitter module. The 4-channel transmitter module. 4 channels. PTM 215 has additional PTM 335 has additional security PTM 535 has security functions. security functions. functions. Both can be connected to It can be connected to the energy Application the energy converter ECO 200. converter ECO 200. ■ Wall switch Application Application ■ Handheld remote controls ■ Handheld remote controls ■ Handheld remote controls ■ Key card switch ■ Key card switch ■ Industrial switches ■ Industrial switches STM 300 STM 320|STM 329 STM 330|STM 331 STM 350 SMD mountable bi- Energy harvesting magnet Energy harvesting wireless tem- Energy harvesting wireless directional wireless sensor contact transmitter module perature sensor module with temperature sensor module with module with an energy with solar cell, learn button solar cell, antenna, learn button solar cell, helix antenna and harvesting interface. side operation, reed contact back operation and pin connec- onboard calibrated temperature Application and helix antenna. Variant tor. It supports plug-in humidity and humidity sensor. ■ Any kind of self-powered STM 329 has a learn button sensor module HSM 100. Application sensor back operation. Application ■ Temperature sensor ■ Self-powered heating valves Application ■ Temperature sensor ■ Humidity sensor ■ Actuators ■ Window/door contact ■ Humidity sensor ■ Room controllers ■ Occupancy sensor WHERE TO BUY? Worldwide Worldwide Worldwide www.futureelectronics.com www.farnell.com www.digikey.com Germany, Austria, SUPPORT Europe Switzerland Italy www.EnOcean.com/support www.EnOcean.com/product-finder www.EnOcean.com/contact www.rs-online.com www.hy-line.de www.specialind.it www.EnOcean.com/distributor Energy converters ECT 310 Perpetuum ECO 200 ECS 300|ECS 310 Themo-electric energy converter Kinetic energy converter harvests linear Solar cells harvest indoor light for harvests temperature differentials for motion for use in energy harvesting energy harvesting wireless sensors. energy harvesting wireless sensors wireless switches. and actuators. Wireless transceiver modules TCM 515 TCM 300 SMD mountable and programmable SMD mountable and programmable or plug&play transceiver module with transceiver module for line-powered reduced power consumption and applications. smaller size. Application Application ■ Actuators ■ Actuators ■ Room controllers ■ Room Controllers ■ Gateways ■ Gateways ■ Repeaters ■ Repeater TCM 310 TCM 320 TCM 330 SMD mountable Programmable transceiver Transceiver Module for and plug&play module for line-powered programmable transceiver module applications vertical LED controllers. for gateways for mounting. Application which an externally Application ■ LED controllers connected host pro- ■ Actuators ■ LED drivers cessor is needed. ■ Room controllers Application ■ Gateways ■ Gateways ■ Repeaters Products in 868 MHz EnOcean for Europe Products with 868 MHz are suitable for Europe and other countries adopting RED. Kits and accessories EnOcean Developer-Kit EnOcean EDK 350 Starter-Kit ESK 300 Developer kit for energy The easy way to get started with harvesting wireless sensor battery-less wireless technology. solutions. EnOcean click HSM 100 Clickboard for TCM 310 Humidity sensor module from MikroElektronika. HSM 100 as extension for STM 33x temperature sensor module. EnOcean software and firmware EnOcean Decoding Gateway EnOcean Link Gateway Controller TCM 300-compatible fi rmware Linux-based library for EnOcean radio Transparent gateway including for decoding of EnOcean telegram stack (e.g. ESP3, EEP). Smart Acknowledge and Remote with rolling code. Management. WHERE TO BUY? Worldwide Worldwide Worldwide www.futureelectronics.com www.farnell.com www.digikey.com Germany, Austria, SUPPORT Europe Switzerland Italy www.EnOcean.com/support www.EnOcean.com/product-finder www.EnOcean.com/contact www.rs-online.com www.hy-line.de www.specialind.it www.EnOcean.com/distributor Products for OEMs EOSW EOSC EKCS EMCS Wall mounted wireless Ceiling mounted wireless Wireless key Wireless magnet occupancy sensor. occupancy sensor. card switch. contact sensor. ETHS USB 300 NWC Wireless temperature and USB gateway. Navigan Wireless Commissioner humidity sensor. NWC 300 for easy confi guration of EnOcean controllers. Products in 902 MHz EnOcean for North America Products with 902 MHz are suitable for USA adopting FCC specification and Canada adopting IC specification. HIGH RELIABILITY The EnOcean radio standard (ISO/IEC 14543-3-1X) operates in license-free 868 MHz, 902 MHz and 928 MHz frequency bands with 1% duty cycle and a reliable radio range of approx. 30m indoors. INTEROPERABILITY Sensor profiles are standardized to ensure product interoperability across all product manufacturers and to provide interoperable system solution. LOW ENERGY REQUIREMENTS Optimized for self-powered switches and sensors with a high data transmission rate of 125 kbit/s for sensor information. Wireless switch & sensor modules PTM 210U PTM 330U Application The 4-channel transmitter module. It can be Push-button transmitter module connected to the energy converter ECO 200. with 4 channels. Application Application ■ Handheld remote controls ■ Wall switch ■ Key card switch ■ Handheld remote controls ■ Industrial switches STM 300U STM 332U|STM 333U STM 350U SMD mountable bi- Energy harvesting wireless tem- Energy harvesting wireless directional wireless sensor perature sensor module with temperature sensor module with module with an energy STM 320U solar cell, antenna, learn button solar cell, helix antenna and harvesting interface. Energy harvesting magnet back operation and pin connec- onboard calibrated temperature Application contact transmitter module with tor. It supports plug-in humidity and humidity sensor. ■ Any kind of self-powered solar cell, learn button sensor module HSM 100. Application sensor side operation, reed contact Application ■ Temperature sensor ■ Self-powered heating valves and helix antenna. ■ Temperature sensor ■ Humidity sensor ■ Actuators Application ■ Humidity sensor ■ Room controllers ■ Window/door contact ■ Occupancy sensor Energy converters ECT 310 Perpetuum ECO 200 Themo-electric energy converter Kinetic energy converter harvests ECS 300|ECS 310 harvests temperature differentials linear motion for use in energy Solar cells harvest indoor light for for energy harvesting wireless harvesting wireless switches. energy harvesting wireless sensors. sensors and actuators. WHERE TO BUY? Worldwide Worldwide USA/Canada www.futureelectronics.com www.digikey.com www.cdiweb.com SUPPORT USA USA Canada www.EnOcean.com/support www.EnOcean.com/product-finder www.EnOcean.com/contact www.adhocelectronics.com www.newark.com www.echoflexsolutions.com www.EnOcean.com/distributor Wireless transceiver modules TCM 515U TCM 300U SMD mountable and programmable or plug&play transceiver SMD mountable and programmable transceiver module with reduced power consumption and smaller size. module for line-powered applications. Application Application ■ Actuators ■ Actuators ■ Room
Load more

Recommended publications
  • Comparison of Zigbee, Z-Wave, Wi-Fi, and Bluetooth Wireless Technologies Used in Home Automation
    Comparison of Zigbee, Z-Wave, Wi-Fi, and Bluetooth Wireless Technologies Used in Home Automation Salim Jibrin Danbatta Asaf Varol Department of Software Engineering Department of Software Engineering Firat University Firat University Elazig, Turkey Elazig, Turkey [email protected] [email protected] Abstract— Most of the home automation wireless technologies A literature review is presented in section II, home on the internet of things are based on ZigBee, Z-Wave, Wi-Fi, automation wireless technologies are discussed in section III. and Bluetooth wireless technologies. While these solutions are The research design is described in section IV while results and good enough, users of smart homes are facing challenges of discussion are presented in section V, and section VI describes selecting the best technology. This paper compares the the conclusions of the study. performance of ZigBee, Z-Wave Wi-Fi and Bluetooth technologies from the user’s perspective. Power consumption, range, cost, ease of use, scalability, and interoperability are the six indices developed as guidelines to potential users, and hence, II. LITERATURE REVIEW the results of this study. With this knowledge, the users can make the appropriate choice of wireless technology solution to use in Several studies about home automation systems have been their home automation systems. done in the past. They include experimental, descriptive, and comparative analysis involving different wired and wireless Keywords—internet of things, home automation, wireless technologies used in Home Automation. technologies, Zigbee, Z-Wave, Wi-Fi, Bluetooth Sikandar et al. [5] show how SMS (short message service) based and wireless technology enhance the controlling of home I.
    [Show full text]
  • ZIGBEE EXPLOITED the Good, the Bad and the Ugly
    08 ZIGBEE EXPLOITED The good, the bad and the ugly Tobias Zillner – August 6th 2015 Cognosec © 2015 | Castellezgasse 16/2 | 1020 Vienna, Austria ZigBee Exploited Version 1.0 TABLE OF CONTENTS ABSTRACT ..................................................................................................................................................... 1 INTRODUCTION ............................................................................................................................................. 1 THE ZIGBEE STANDARD .............................................................................................................................. 1 ZIGBEE SECURITY ........................................................................................................................................ 2 Network Layer Security ................................................................................................................................ 2 Application Support Sublayer Security ......................................................................................................... 2 ZIGBEE APPLICATION PROFILES ............................................................................................................... 3 ZigBee Home Automation Public Application Profile (HAPAP) .................................................................... 3 ZigBee Light Link Profile (ZLL) ..................................................................................................................... 4 SECBEE – A NEW ZIGBEE SECURITY
    [Show full text]
  • Zach-2010-Monitoring for Simulation Validation-182.Pdf
    MONITORING FOR SIMULATION VALIDATION Robert Zach and Ardeshir Mahdavi Department of Building Physics and Building Ecology, Vienna University of Technology, Austria building data streams are not exploited. Such benefits ABSTRACT include: One of the key problems in building simulation is to i) Energy optimization through improved determine the accuracy of a simulation model. Due to management of technical building systems. the complexity of a building, a comprehensive and exhaustive mathematical proof is usually not ii) Increased awareness of building users possible. Therefore, an appropriate way to validate a regarding their impact on buildings’ energy building model is to compare simulation results with use. measurements obtained from real buildings. Such iii) Early detection (and treatment) of comparisons not only allow for the validation of deficiencies and malfunctions in energy simulation models used in the context of building systems and devices, thus effectively design support, but also provide calibrated simulation supporting a preventive maintenance models to be applied in the context of real-time regime. simulation-assisted building systems control. iv) Successive building performance INTRODUCTION improvement and optimization via the analyses of dynamically updated building This paper deals with the monitoring infrastructure energy and performance data bases. necessary to validate building simulation models and implement simulation-based control strategies v) Long-term accumulation of empirical (Mahdavi et al. 2009, Orehounig et al. 2010). information on buildings' energy and Required sensors are discussed and technologies for environmental performance toward different domains are compared and assessed. improving the design, construction, and Possible network infrastructures to collect the operation of existing and new buildings. measured data are discussed.
    [Show full text]
  • Network & Wireless
    NETWORK & WIRELESS HUMIDITY & WIRELESS Kele Has Doubled the Offering of Network and Wireless Solutions, NETWORK and Continues to Add to Our Options to Meet Your Needs. Babel Buster | p. 719 L-VIS Series | p. 721 BASRT-B | p. 727 Series 110A | p. 733 ValuPoint VP4-23 | p. 744 EKI Series | p. 738 Series NETWORK & WIRELESS Products manufactured MODEL/SERIES PAGE in the United States Network Display and Control Panels Wireless EnOcean and ZigBee Devices L-VIS Series — BACnet and LON Touch Panel . 721 and Systems (cont.) Products that are BBC-SD — BACnet Graphic Display . 724 E3T-SxE Series — EnOcean Wireless European new to the catalog WebOP Series — Touchscreen Operator Display Light Switches . 826 Panel . 725 E3T-S2H Series — EnOcean Wireless Handheld Remote . 827 Network Gateways EasySens Thanos — EnOcean Room Operating ETH-1000 — Provides connectivity between Ethernet Panel . .. 830 and RS-485 based networks . 713 EasySens Receiver Gateways — EnOcean Receiver XLTR-1000 — Provides Connectivity Between Two Gateways . 831 Rs-485 Based Networks . 714 EasySens SRC Receiver Controllers — EnOcean Raptor Protocol Converter — RLE Technologies Receiver Controllers . 832 Protocol Coverter . 715 EasySens Repeater — EnOcean Wireless LGATE-9xx Series — Lonworks/Bacnet And Repeater . 833 Universal Gateways . 717 EasySens Switches — EnOcean Lighting, Blinds Babel Buster Series — BACnet - Modbus - SNMP and Shutters Switches . 834 Gateways . 719 EasySens Specialty Wireless Transmitters — AddMe® Series — BACnet - Modbus Network I/O . 743 EnOcean Remote Control, Key Card Switch, Window/Door Contact . 835 Network I/O Modules EasySens Room Sensors — EnOcean Temperature, Humidity and CO2 Sensors . 836 L-IOB Series — BACnet and LON I/O Module . 739 EasySens Temperature Sensors — EnOcean i.CanDoIt Series — Embedded Network Servers 742 Surface, Duct, Remote and Outdoor AddMe® Series — BACnet - Modbus Network I/O .
    [Show full text]
  • X2rail-1 Deliverable D7.1 Analysis of Existing Lines and Economic Models
    X2Rail-1 Project Title: Start-up activities for Advanced Signalling and Automation Systems Starting date: 01/09/2016 Duration in months: 36 Call (part) identifier: H2020-S2RJU-CFM-2015-01-1 Grant agreement no: 730640 Deliverable D7.1 Analysis of existing lines and economic models Due date of deliverable Month 09 Actual submission date 18-02-2019 Organization name of lead contractor for this deliverable 18-TTS Dissemination level PU Revision DB-001-02-R2 Deliverable template version: 02 (09/11/16) X2Rail-1 Deliverable D7.1 Analysis of existing lines and economic models Authors Author(s) Alstom Transport S.A. (ALS) Pierre Damien Jourdain AZD Praha SRO (AZD) Michal Pavel Lukas Michalik BOMBARDIER TRANSPORTATION SWEDEN AB (BTSE) Jorgen Mattisson INDRA (INDRA) Francisco Parrilla Thales Transportation Systems GMBH (TTS) Ana Millán Belen Losada Trafikverket – TRV (TRV) Jan Bystrom Contributor(s) ANSALDO STS S.p.A. (ASTS) Giovanni Canepa CAF Signalling S.L. (CAF) Ignacio Gonzalez Deutsche Bahn AG (DB) Julian Mohr MERMEC SPA (MERMEC) Vito Caliandro Siemens (SIE) Jose Manuel Mellado GA 730640 Page 2 of 165 X2Rail-1 Deliverable D7.1 Analysis of existing lines and economic models 1. Executive Summary The present document constitutes the first issue of Deliverable D7.1 “Analysis of existing lines and economic models” in the framework of the Project titled “Start-up activities for Advanced Signalling and Automation Systems” (Project Acronym: X2Rail-1; Grant Agreement No 730640). Although modern signalling systems are going to considerably reduce trackside equipment in the next years, a source of the innovation step proposed by the X2Rail-1 WP7 is to provide fully distributed control of remote trackside objects such as points, level crossings, etc., without requiring the necessity to install specialized trackside cabling and associated cable routes, ducting etc.
    [Show full text]
  • Zigbee-Based System for Remote Monitoring and Control of Switches
    Copyright is owned by the Author of the thesis. Permission is given for a copy to be downloaded by an individual for the purpose of research and private study only. The thesis may not be reproduced elsewhere without the permission of the Author. ZigBee-Based System for Remote Monitoring and Control of Switches A thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering at Massey University, Albany, New Zealand. © Matthew Lyon October 2010 1 Abstract Home automation technology has existed for nearly four decades, but is nonetheless mostly absent in the average home today. The systems that do exist are often highly customised and expensive, catering to a very niche market, or overly sophisticated and complicated. Many of these also require extensive, dedicated cabling as their communications backbone and as such are only practical to install during the construction of a new house. The core aims of this project are to develop a cheap and simple home automation system that can be easily installed in new and existing houses. These aims are achieved by creating a centralised system where most of the intelligence is managed by a PC server and the end nodes are kept as simple as possible. The server is responsible for basic security, maintaining awareness of the current system state and providing the user interface. At the outer edge of the system is a ZigBee network of wall switches and, in between, a home gateway provides a protocol translation service between the two. The new, “smart” switches are designed to be entirely compatible with existing wall switches in terms of their mounting and wiring requirements, and so ZigBee is chosen to provide a reliable wireless communication channel between the end nodes and the gateway.
    [Show full text]
  • What's New in Zigbee 3.0
    White Paper SWRA615A–June 2019 What's New in Zigbee 3.0 Zigbee is an industry-proven worldwide standard for low power, self-healing, robust mesh networks offering a complete and interoperable IoT solution for home and building automation. Based on the IEEE 802.15.4 standard and providing a simplified approach to commissioning devices securely, it enables users the ability to form networks involving over 250 devices for large coverage areas. Through adherence to a profile specification and ZCP (Zigbee Compliant Platform) testing, Zigbee devices can become certified for interoperability across various platforms. Texas Instruments™ CC13x2 and CC26x2 devices are part of the SimpleLink™ microcontroller (MCU) platform. Zigbee based applications can be developed on these devices using the TI Z-Stack included with the SimpleLink™ CC13x2 and CC26x2 software development kit (SDK). This SDK includes everything needed to develop Zigbee certifiable solution including tools, application examples, documentation and source code. It uses Zigbee 3.0, the latest specification from the Zigbee Alliance which unifies former application segments under a common certification process. The following sections intend to give users an overview of all of the new features introduced in the Zigbee 3.0 specification. 1 Overview At the core of Zigbee 3.0 is the Zigbee PRO 2017 (R22). Note that previously Zigbee Pro 2015 (R21) was required for Zigbee 3.0, which has now been replaced with the newer Zigbee Pro 2017 (R22) specification. Older implementation based on the R21 specification are still compatible with the new R22 specification. The Zigbee PRO Specification adds child device management, improved security features, and new network topology options to Zigbee networks.
    [Show full text]
  • Cybersecurity of Industrial Cyber-Physical Systems: a Review
    CYBERSECURITY OF INDUSTRIAL CYBER-PHYSICAL SYSTEMS: AREVIEW Hakan Kayan Matthew Nunes School of Computer Science and Informatics School of Computer Science and Informatics Cardiff University, UK Cardiff University, UK [email protected] [email protected] Omer Rana Pete Burnap School of Computer Science and Informatics School of Computer Science and Informatics Cardiff University, UK Cardiff University, UK [email protected] [email protected] Charith Perera School of Computer Science and Informatics Cardiff University, UK [email protected] January 12, 2021 ABSTRACT Industrial cyber-physical systems (ICPSs) manage critical infrastructures by controlling the processes based on the “physics” data gathered by edge sensor networks. Recent innovations in ubiquitous computing and communication technologies have prompted the rapid integration of highly intercon- nected systems to ICPSs. Hence, the “security by obscurity” principle provided by air-gapping is no longer followed. As the interconnectivity in ICPSs increases, so does the attack surface. Industrial vulnerability assessment reports have shown that a variety of new vulnerabilities have occurred due to this transition while the most common ones are related to weak boundary protection. Although there are existing surveys in this context, very little is mentioned regarding these reports. This paper bridges this gap by defining and reviewing ICPSs from a cybersecurity perspective. In particular, multi-dimensional adaptive attack taxonomy is presented and utilized for evaluating
    [Show full text]
  • Enocean Alliance Now with More Than 170 Members (01/2011)
    The way into the future. The EnOcean Standard for sustainable buildings. Energy-efficient. Interoperable. Practice-proven. Self-powered wireless technology from EnOcean. Everything else is prior art. ENOCEAN IS THE KEY TO INTELLIGENT GREEN BUILDINGS. Due to the unique combination of miniaturised energy converters with reliable radio technology, these wireless sensor networks operate for decades without maintenance, are flexible, and ensure cost reductions and energy savings in buildings and industrial installations alike: n Building automation optimizes energy savings and reduces operating costs lowering total cost of ownership. It furthermore, enhances security, protection and convenience. n Wireless radio technology is essential to the success of building automation. It permits the required number, functionality and flexibility of the necessary sensors. Radio technology minimizes installation times and reduces system costs. n No batteries is a mandatory requirement for larger installations. The cost to monitor, replace and recycle batteries increases with the number of installed nodes. Batteryless EnOcean radio solutions are eco-friendly, comply with the principles of building biology, and save key resources. PREMINO II, MUNICH New office building 2007: cross-facility solution Application Building automation with WAGO I/O, DALI, sunshield, heating control, ceilings with integrated cooling Solution n 55 window contacts n 352 lighting switches n 321 blind switches n 303 room temperature sensors n Room controllers in ceilings and floors Benefits n Flexible room structure n Simple installation and service n Full interoperability of products ENOCEAN WIRELESS STANDARD FOR SUSTAINABLE BUILDING. Self-powered Only EnOcean wireless technology supports batteryless and maintenance-free sensors that can be freely positioned: switches next to doors, temperature sensors at the workplace, and motion detectors in the middle of rooms.
    [Show full text]
  • Home Automation an Introduction to Home Assistant
    Open Source Home Automation An Introduction to Home Assistant Rob Peck ([email protected]) What is Home Automation? • Using computers to control our physical world. • Controlling lighting, HVAC, appliances, etc using remote systems and automations. • Automating repetitive tasks around the home. We are humans, we shouldn’t behave like computers. My Home Automation Journey • Bought our house in 2012, it has eave lighting. Makes the house look pretty at night. Decided I wanted them to turn on and off at certain times. • Has 2 different banks of lights, with different switches on opposite sides of the house. :/ • First I used WeMo Wifi switches for this and they “worked” but were kind of a pain to use. The Z-Wave Era • After being unhappy with the WeMo Wifi switches, I decided to go deeper into the Home Automation world. Started looking at industry standards. • There are a handful of home automation standards: ZigBee and Z-Wave are the two big ones and use mesh wireless. X10 is an older protocol using power line communication, Insteon is a newer powerline and wireless mesh protocol. • I decided on Z-Wave mostly because it used the less-crowded 900mhz band with longer range. ZigBee is in the 2.4ghz band, same as wifi. Downside is Z- Wave devices are usually more expensive. • Eventually I ended up with both. SmartThings • All protocols require a hub. The hub acts as a central coordinator of messages and a source for automations. • Both ZigBee and Z-Wave are mesh protocols, meaning that some devices also act as re-transmitters so that messages can reach remote areas.
    [Show full text]
  • Onboard Monitoring and Control – Wireless Sensor Networks Systems Integration DTFR53-12-D-00003L 6
    U.S. Department of Transportation Onboard Monitoring and Control – Wireless Federal Railroad Sensor Networks Systems Integration Administration Office of Research, Development, and Technology Washington, DC 20590 DOT/FRA/ORD-21/21 Final Report July 2021 NOTICE This document is disseminated under the sponsorship of the Department of Transportation in the interest of information exchange. The United States Government assumes no liability for its contents or use thereof. NOTICE The United States Government does not endorse products or manufacturers. Trade or manufacturers’ names appear herein solely because they are considered essential to the objective of this report. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE 3. REPORT TYPE AND DATES COVERED July 2021 Technical Report 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Onboard Monitoring and Control – Wireless Sensor Networks Systems Integration DTFR53-12-D-00003L 6. AUTHOR(S) Task Order 0011 Tom Campbell*, Dr. Hamid Sharif** 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8.
    [Show full text]
  • Embedded Network Combining CAN, Zigbee and DC-PLC for Motorhome
    VEHICULAR 2015 : The Fourth International Conference on Advances in Vehicular Systems, Technologies and Applications Embedded Network Combining CAN, ZigBee and DC-PLC for Motorhome Fabienne Nouvel Hussein Kdouh IETR/INSA IETR/INSA Rennes, France Rennes, France e-mail : [email protected] e-mail: [email protected] Abstract— Today, the number of motorhomes increases in low to medium data rates and better reliability. However, these Europe and North America as they offer greater individual buses are placed in the motor area and mainly used for driving freedom. As motorhome users spend the most of their time in and automotive controls. Furthermore, they must be separated their confined area, it seems essential to develop new solutions from the possible camper van “home network”, due to security that make their life easier. In order to meet the new needs of levels. customers, a new centralized architecture of a control system based on ubiquitous wired and wireless solutions is studied in this If we consider it as a "mobile home", many technologies paper. The objective of this study is to verify the feasibility of have been developed to make the home smart. The ubiquitous technologies in this original environment. Different technologies include solution for building automation as well measurements have been conducted on a motorhome using as the domestic control activities [3]. Furthermore, devices Controller Area Networks (CAN), ZigBee and direct current may allow remote access. power line communications (DC-PLC). Results have shown that these technologies may be used in a future hybrid control system It seems to be interesting to combine networks used for in a motorhome.
    [Show full text]