Official Journal C 353 of the European Union

Volume 58 English edition Information and Notices 24 October 2015

Contents

II Information

INFORMATION FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

European Commission

2015/C 353/01 Non-opposition to a notified concentration (Case M.7669 — Lion Capital/Aryzta/Picard Groupe) (1) 1

IV Notices

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

European Commission

2015/C 353/02 Euro exchange rates ...... 2

Court of Auditors

2015/C 353/03 Special Report No 13/2015 — ‘EU support to timber-producing countries under the FLEGT Action Plan’ 3

EN (1) Text with EEA relevance NOTICES FROM MEMBER STATES

2015/C 353/04 Notice from the Government of the Republic of Poland concerning Directive 94/22/EC of the European Parliament and of the Council on the conditions for granting and using authorisations for the prospection, exploration and production of hydrocarbons in the ‘Skołyszyn’ area ...... 4

V Announcements

OTHER ACTS

European Commission

2015/C 353/05 Publication of an amendment application pursuant to Article 50(2)(a) of Regulation (EU) No 1151 /2012 of the European Parliament and of the Council on quality schemes for agricultural products and foodstuffs ...... 6 24.10.2015 EN Official Journal of the European Union C 353/1

II (Information)

INFORMATION FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

EUROPEAN COMMISSION

Non-opposition to a notified concentration (Case M.7669 — Lion Capital/Aryzta/Picard Groupe) (Text with EEA relevance) (2015/C 353/01)

On 7 August 2015, the Commission decided not to oppose the above notified concentration and to declare it compati­ ble with the internal market. This decision is based on Article 6(1)(b) of Council Regulation (EC) No 139/2004 (1). The full text of the decision is available only in the English language and will be made public after it is cleared of any business secrets it may contain. It will be available: — in the merger section of the Competition website of the Commission (http://ec.europa.eu/competition/mergers/ cases/). This website provides various facilities to help locate individual merger decisions, including company, case number, date and sectoral indexes, — in electronic form on the EUR-Lex website (http://eur-lex.europa.eu/homepage.html?locale=en) under document number 32015M7669. EUR-Lex is the online access to European law.

(1) OJ L 24, 29.1.2004, p. 1. C 353/2 EN Official Journal of the European Union 24.10.2015

IV (Notices)

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

EUROPEAN COMMISSION

Euro exchange rates (1) 23 October 2015

(2015/C 353/02)

1 euro =

Currency Exchange rate Currency Exchange rate USD US dollar 1,1084 CAD Canadian dollar 1,4483 JPY Japanese yen 133,80 HKD Hong Kong dollar 8,5901 DKK Danish krone 7,4597 NZD New Zealand dollar 1,6306 GBP Pound sterling 0,71955 SGD Singapore dollar 1,5408 SEK Swedish krona 9,4079 KRW South Korean won 1 249,33 ZAR South African rand 14,9007 CHF Swiss franc 1,0793 CNY Chinese yuan renminbi 7,0390 ISK Iceland króna HRK Croatian kuna 7,6243 NOK Norwegian krone 9,2525 IDR Indonesian rupiah 15 057,70 BGN Bulgarian lev 1,9558 MYR Malaysian ringgit 4,6862 CZK Czech koruna 27,074 PHP Philippine peso 51,565 HUF Hungarian forint 309,95 RUB Russian rouble 68,5882 PLN Polish zloty 4,2529 THB Thai baht 39,254 RON Romanian leu 4,4269 BRL Brazilian real 4,3168 TRY Turkish lira 3,1868 MXN Mexican peso 18,2027 AUD Australian dollar 1,5250 INR Indian rupee 71,8562

(1) Source: reference exchange rate published by the ECB. 24.10.2015 EN Official Journal of the European Union C 353/3

COURT OF AUDITORS

Special Report No 13/2015 ‘EU support to timber-producing countries under the FLEGT Action Plan’ (2015/C 353/03)

The European Court of Auditors hereby informs you that Special Report No 13/2015 ‘ EU support to timber-producing countries under the FLEGT Action Plan’ has just been published. The report can be accessed for consultation or downloading on the European Court of Auditors’ website: http://eca.europa.eu A hard copy version of the report may be obtained free of charge on request to the Court of Auditors: European Court of Auditors Publications (PUB) 12, rue Alcide De Gasperi 1615 Luxembourg LUXEMBOURG Tel. +352 4398-1 E-mail: [email protected] or by filling in an electronic order form on EU-Bookshop. C 353/4 EN Official Journal of the European Union 24.10.2015

NOTICES FROM MEMBER STATES

Notice from the Government of the Republic of Poland concerning Directive 94/22/EC of the European Parliament and of the Council on the conditions for granting and using authorisations for the prospection, exploration and production of hydrocarbons in the ‘Skołyszyn’ area (2015/C 353/04)

This procedure concerns the granting of concessions for the prospection and/or exploration of oil and/or natural gas deposits in the ‘Skołyszyn’ area, Małopolskie and Podkarpackie provinces:

PL-1992 coordinate system Name Block No X Y

219 733,92 619 454,87

221 404,67 679 600,42 parts of concession blocks Skołyszyn 212 143,88 679 908,95 Nos 414 and 415 211 064,14 643 905,34

210 523,09 619 421,78

Applications must cover the same area.

Concession applications must be submitted to the central office of the Ministry of the Environment no later than 12:00 noon (CET/CEST) on the last day of the 90-day period commencing on the day following the date of publication of this notice in the Official Journal of the European Union.

Applications received will be assessed on the basis of the following criteria:

a) the technology proposed for the work (50 %);

b) the technical and financial capacities of the applicant (40 %);

c) the fee proposed for the establishment of mining usufruct rights (10 %).

The minimum fee for the establishment of mining usufruct rights for the ‘Skołyszyn’ area is:

a) for the prospection of oil and/or natural gas deposits:

— during a three-year base period PLN 64 157,70 per year;

— for the fourth and fifth years of validity of a mining usufruct contract PLN 76 989,23 per year;

— for the sixth and subsequent years of validity of a mining usufruct contract PLN 89 820,77 per year;

b) for the exploration of oil and/or natural gas deposits:

— during a three-year base period PLN 128 315,39 per year;

— for the fourth and fifth years of validity of a mining usufruct contract PLN 153 978,47 per year;

— for the sixth and subsequent years of validity of a mining usufruct contract PLN 179 641,55 per year;

c) for the prospection and exploration of oil and/or natural gas deposits:

— during a five-year base period PLN 128 315,39 per year;

— for the sixth, seventh and eighth years of validity of a mining usufruct contract PLN 153 978,47 per year;

— for the ninth and subsequent years of validity of a mining usufruct contract PLN 179 641,55 per year. 24.10.2015 EN Official Journal of the European Union C 353/5

The application evaluation procedure will be completed within a period of six months following the deadline for sub­ mitting applications. Applicants will receive written notification of the outcome of the procedure. Applications must be drawn up in Polish. The licensing authority will grant concessions for the prospection and/or exploration of oil and/or natural gas deposits in the ‘Skołyszyn’ area to the successful applicant after taking account of the opinion of the relevant authorities, and will conclude a mining usufruct contract with it. In order to be able to carry out activity involving the prospection or exploration of hydrocarbon deposits in Poland, an operator must hold both mining usufruct rights and a concession. Applications should be sent to the following address: Ministry of the Environment Departament Geologii i Koncesji Geologicznych (Geology and Geological Concessions Department) ul. Wawelska 52/54 00-922 Warszawa POLSKA/POLAND Information may be obtained from: — the website of the Ministry of the Environment: www.mos.gov.pl — Geology and Geological Concessions Department Ministry of the Environment ul. Wawelska 52/54 00-922 Warszawa POLSKA/POLAND Tel. +48 223692449 Fax +48 223692460 Email: [email protected] C 353/6 EN Official Journal of the European Union 24.10.2015

V (Announcements)

OTHER ACTS

EUROPEAN COMMISSION

Publication of an amendment application pursuant to Article 50(2)(a) of Regulation (EU) No 1151/2012 of the European Parliament and of the Council on quality schemes for agricultural products and foodstuffs (2015/C 353/05)

This publication confers the right to oppose the amendment application, pursuant to Article 51 of Regulation (EU) No 1151/2012 of the European Parliament and of the Council (1). APPLICATION FOR APPROVAL OF AN AMENDMENT TO THE PRODUCT SPECIFICATION OF PROTECTED DESIGNATIONS OF ORIGIN/PROTECTED GEOGRAPHICAL INDICATIONS WHICH IS NOT MINOR Application for approval of an amendment in accordance with the first subparagraph of Article 53(2), of Regulation (EU) No 1151/2012 ‘KARLOVARSKÝ SUCHAR’ EU No: CZ-PGI-0105-01344 — 15.6.2015 PDO ( ) PGI ( X ) 1. Applicant group and legitimate interest Karlovarská pekárna Trend s.r.o. Slepá 517/1 360 05 ČESKÁ REPUBLIKA Tel. +420 774455807 Email: [email protected] The legitimate interest derives from the fact that the applicant is the sole producer in the area; see text for further details. 2. Member State or Third Country 3. Heading in the product specification affected by the amendment(s) — Name of product — Description — Geographical area — Proof of origin — Method of production — Link — Labelling — Other [to be specified] 4. Type of amendment(s) — Amendment to product specification of a registered PDO or PGI not to be qualified as minor in accordance with the third subparagraph of Article 53(2) of Regulation (EU) No 1151/2012.

(1) OJ L 343, 14.12.2012, p. 1. 24.10.2015 EN Official Journal of the European Union C 353/7

— Amendment to product specification of a registered PDO or PGI for which a single document (or equiva­ lent) has not been published not to be qualified as minor in accordance with the third subparagraph of Article 53(2) of Regulation (EU) No 1151/2012.

5. Amendment(s) I. Description of product: In the seventh paragraph of point 4.2 of the Specification ‘Physico-chemical properties’, the sentence ‘ Average val­ ues per 100 g product - Karlovarský suchar special’ is replaced by ‘ Minimum quantities of constituents per 100 g of product: “Karlovarský suchar special”’. The figures for the various constituents are amended as follows:

Dry matter: min. 90 g;

Protein: min. 10 g;

Fat: min. 1,7 g;

Carbohydrates: min. 64,1 g;

Energy value: 1 400-1 570 kJ.

Point 3.2 of the single document is worded accordingly.

II. In the eighth paragraph of point 4.2 of the Specification, the sentence ‘Average values per 100 g product - Karlovarský suchar dietní’ is replaced by ‘Minimum quantities of constituents per 100 g of product: “Karlovarský suchar dietní”’. The figures for the various constituents are amended as follows:

Dry matter: min. 90 g;

Protein: min. 10 g;

Fat: min. 1,5 g;

Carbohydrates: min. 63,9 g;

Energy value: 1 370-1 550 kJ.

In the 10th paragraph ‘Microbiological properties’ of point 4.2, the word ‘well’ is deleted from the third sentence ‘In all parameters results are negative or well below the norm.’ The fifth sentence ‘The microbiological properties of the product must comply with this regulation: Decree No 132/2004 Coll., on microbiological requirements for foods, the method of their control and evaluation.’ is replaced by ‘The microbiological properties of the product must conform to the legislation in force.’

In the 11th paragraph of point 4.2, ‘Karlovarský suchar special:’, the words ‘ drinking water’ and ‘ Karlovy Vary thermal spring salt’ are deleted.

In the 13th paragraph of point 4.2, the sentence ‘They are marketed in 200 g cartons.’ is replaced by ‘They are marketed in packagings of different weights.’

Points 3.2 and 3.3 of the single document are worded accordingly.

Justification for the amendments under I and II The values specified for the quantities of the various constituents of Karlovarský suchar special and Karlovarský suchar dietní are replaced by a higher minimum dry matter content and lower minimum fat and sugar contents.

The higher minimum dry matter content is the result of improved storage and transport technology, which means that the product does not absorb additional moisture. The lower sugar and fat contents are due to modern dietary requirements, bearing in mind that rusks are perceived and used as dietary food. The reduced fat and sugar con­ tents have resulted in a lower energy value, especially in the case of Karlovarský suchar dietní. The ranges originally indicated for the various constituents have been replaced by prescribed minimum amounts owing to a streamlining of control mechanisms, and there is not normally any significant increase in these values as the energy value speci­ fied above has to be maintained. C 353/8 EN Official Journal of the European Union 24.10.2015

III. Proof of origin Several minor amendments to point 4.4 of the Specification are necessary.

In the second sentence of the first paragraph, the words ‘Karlovy Vary thermal spring salt’ are deleted.

The first sentence of the second paragraph is amended: ‘An internal check for compliance with specifications is performed once every six months by a c ompany technologist.’ is replaced by ‘ An internal check for compliance with the specification is performed by a company technologist in accordance with the HACCP.’

In the second sentence of the third paragraph, the words ‘critical points’ are deleted.

In the fifth paragraph ‘Individual control points’, under ‘sifting of flour’ , the words ‘ physical checks’ are deleted. The indent ‘- dissolution of fat (visual checks for impurities)’ is also deleted from this paragraph.

In the sixth paragraph ‘Main provisions’ , the words ‘in accordance with implementing Decrees Nos 852/2004 and 178/2002’ are replaced by the words ‘in accordance with the legislation in force’.

In the seventh paragraph ‘Microbiological control’ , the first sentence ‘ Samples are sent for microbiological analysis at least 1x per year.’ is replaced by ‘Samples are sent for microbiological analysis, in accordance with the HACCP system.’ In the fourth sentence, the word ‘well’ is deleted. The fifth sentence ‘The microbiological properties of the product must comply with this implementing decree: Decree No 132/2004 Coll., on microbiological requirements for foods, the method of their control and evaluation.’ is replaced by ‘Microbiological properties are assessed on the basis of the legislation in force.’

Justification for amendments under III Internal checking of compliance with the specification and the technological process are replaced by continuous HACCP monitoring.

Checks on the dissolving of fat have been deleted as raw materials production has been modernised and producers and suppliers guarantee product quality by means of quality certificates.

IV. Method of production Several minor modifications need to be made to point 4.5 of the Specification.

In the second paragraph, the words ‘Karlovy Vary thermal spring salt’ contained within the brackets are deleted.

The sentence ‘Karlovy Vary sprudel salt is a mixture of sodium and potassium sulphate and sodium hydrogen car­ bonate.’ is deleted.

In the fifth paragraph ‘Mixing’, the second and third sentences ‘After adding raw materials individual initial raw materi­ als are mixed in a kneading-t rough with warm water, with fermentation starting temperature of around 27 °C. After that a m edium stiff dough is mixed in a column beater for around seven minutes and is left to rest with a dough temperature of 27–30 °C, the dough is left to rest for ca 60-80 minutes.’ are replaced by ‘After adding raw materi­ als individual initial raw materials are mixed in a kneading-trough with water. After that a medium stiff dough is mixed in a c olumn beater and is left to rest with a d ough temperature of 20-30 °C; the dough is left to rest for ca 20-40 minutes.’

In the sixth paragraph ‘Separation’, the sentence ‘The matured dough is separated on a separator into cuts of 1,10 – 1,15 kg in weight, which are formed in loaf shapes and placed into greased forms (shaped into forms).’ is replaced by ‘After resting, the dough is shaped into loaves which are then cut and placed in greased forms (shaping into forms).’

In the seventh paragraph ‘Rising’, the sentence ‘The loaves are left to rise for ca 60 minutes at a proofing tempera­ ture of 35 to 40 °C and humidity of 70-75 %.’ is replaced by ‘ The loaves are left to rise for about 60 minutes at a prover oven temperature of 35-40 °C and 70-80 % humidity.’

In the eighth paragraph ‘Baking’, the sentence ‘After rising the loaves are placed in uncovered forms into a steamed peel oven at a temperature of 220 - 230 °C, with baking time of 35 - 45 minutes at a temperature of 280 – 300 °C.’ is replaced by ‘After rising, the loaves are placed, in covered forms, into a steamed peel oven or rotary oven at a tempera­ ture of 220-240 °C and baked for 35-45 minutes at a temperature of 200-230 °C.’ 24.10.2015 EN Official Journal of the European Union C 353/9

In the 10th paragraph ‘Slicing’, the sentence ‘The loaves are sliced on a cutter into slices of 13,5 mm thickness.’ are replaced by ‘The loaves are sliced on a cutter.’

In the 11th paragraph ‘Toasting’ , the sentence ‘The slices are directly placed onto the toasting belt and toasted for 12 minutes with a toasting space temperature of 200–210 °C and burner temperature of 280–300 °C’ is replaced by ‘The slices are laid horizontally on a toasting belt or baking sheets and toasted for about 8-12 minutes at a baking compartment temperature of 200-210 °C.’

In the 12th paragraph ‘Cooling and packaging’, the sentences ‘ After toasting, the slices are placed in crates and, when thoroughly cooled, are wrapped in aluminium foil with protective paper. The wrapped rusks are placed in small printed cartons, which are then packed into large cardboard boxes. The product weighs 200 g, with a toler­ ance of -7 %.’ are replaced by ‘The toasted slices are placed onto racks and, when thoroughly cooled, are packaged in foil with a label affixed or printed foil, or in cartons of different weights.’

Point 3.4 of the single document is worded accordingly.

Justification for the amendments under IV With regard to the deletion of the reference to Karlovy Vary thermal spring salt in the second paragraph, see Justi­ fication for amendments under V.

As the temperature of the raw materials used and the quantity of dough mixed are not always the same, the parameters concerning the temperature of the water, fermentation, mixing time, the temperature of the dough and the standing time are amended.

In the case of cutting, reference to the thickness is deleted because this depends on the size of the baking tins used.

In the case of proving, information regarding humidity is added because covered baking tins are used. A fairly high level of humidity is required for the dough to prove properly in the covered baking tins.

In the case of baking, the dough has to be placed in closed baking tins to ensure that the dimensions of the slices remain the same. As a result of advances in oven design, another possible type of oven, i.e. the rotary oven, is also mentioned. The oven-loading temperature is higher because the temperature falls by about 10 °C when steam is introduced into the baking compartment of the ovens used. The baking temperature is amended because modern­ ised equipment is more efficient whilst using less power, which is more economical and more environment- friendly.

In the case of slicing, reference to the thickness of the slices is deleted, as this has no bearing on the resulting product quality.

With regard to toasting, more modern ovens are now used. Conveyor-belt ovens are now used only rarely and baking sheets are used in rotary ovens. The toasting time is amended as it depends on the quantity of rusks being toasted. The reference to the temperature of the burners is deleted, as this has no bearing on the quality of the resulting product.

In the case of packaging, greater variation has been permitted so as to be able to meet consumers' different requirements.

V. Link The final sentence of the second paragraph of point 4.6 ‘Link’ of the Specification ‘The quality of the product derives from the use of local raw materials (Karlovy Vary water, Karlovy Vary thermal spring salt), and from local traditions and human experience.’ is replaced by ‘The quality of the product derives from the use of local raw materials (Karlovy Vary thermal spring water), and from local traditions and human experience.’

The first sentence of the third paragraph ‘The product contains Karlovy Vary thermal spring water and, in the case of Karlovarský suchar special, Karlovy Vary thermal spring salt.’ is replaced by ‘The product contains Karlovy Vary thermal spring water.’ In the final sentence of this paragraph, the words ‘ Karlovy Vary thermal spring salt’ are deleted.

Point 5 of the single document is worded accordingly.

Justification for the amendments under V When the original specification was drawn up, Karlovy Vary thermal spring salt was produced by means of a s pecific technology, namely nanofiltration, which is no longer used. Karlovy Vary thermal spring salt now has different parameters, as it is produced intermittently and by different methods. It therefore appears appropriate to replace Karlovy Vary thermal spring salt and the substances it contains with Karlovy Vary thermal spring water without the addition of drinking water. This does not in any way affect the taste or other properties of the product. C 353/10 EN Official Journal of the European Union 24.10.2015

SINGLE DOCUMENT ‘KARLOVARSKÝ SUCHAR’ EU No: CZ-PGI-0105-01344 — 15.6.2015 PDO ( ) PGI ( X ) 1. Title ‘Karlovarský suchar’

2. Member State or Third Country Czech Republic

3. Description of the agricultural product or foodstuff 3.1. Type of product Group 2.4: Bread, pastry, cakes, confectionery, biscuits and other baker's wares.

3.2. Description of product to which the name in 1 applies Two varieties of ‘Karlovarský suchar’ are currently produced: ‘Karlovarský suchar special’ and ‘Karlovarský suchar dietní’.

Shape: slices cut from a loaf, regular shape corresponding to the tin in which the product was baked.

Appearance: uniformly porous, well baked, clean, crisp, well dried; it must not be burnt and must not contain foreign objects.

Colour: golden brown, but not dark.

Taste: delicate baked taste; must not be bitter or sour or have any other foreign taste.

Aroma: normal odour of bakery goods; must not be stale or have any foreign odour.

Physico-chemical characteristics:

Minimum quantities of constituents per 100 g of product — ‘Karlovarský suchar special’:

Dry matter: min. 90 g;

Protein: min. 10 g;

Fat: min. 1,7 g;

Carbohydrates: min. 64,1 g;

Energy value: 1 400-1 570 kJ.

Minimum quantities of constituents per 100 g of product — ‘Karlovarský suchar dietní’:

Dry matter: min. 90 g;

Protein: min. 10 g;

Fat: min. 1,5 g;

Carbohydrates: min. 63,9 g;

Energy value: 1 370-1 550 kJ.

They are placed on the market packaged in foil with a label affixed or in printed foil, or in cartons of different weights.

3.3. Feed (for products of animal origin only) and raw materials (for processed products only) ‘Karlovarský suchar special’: wheat flour, Karlovy Vary thermal spring water, flour improver, sugar, solid vegetable fat, yeast, cooking salt, dried egg yolk.

‘Karlovarský suchar dietní’: wheat flour, Karlovy Vary thermal spring water, drinking water, flour improver, solid vegetable fat, yeast, cooking salt. 24.10.2015 EN Official Journal of the European Union C 353/11

Karlovy Vary thermal spring water is of the bicarbonate-sulphur-sodium-chloride type with total mineralisation of around 6,45 g/l and a minerals content of 560-980 mg/l.

3.4. Specific steps in production that must take place in the identified geographical area The key raw material (Karlovy Vary thermal spring water) is obtained from the defined area. The processing of the raw materials and all stages of production take place in the defined area.

The production process for ‘Karlovarský suchar’ is as follows:

Dough is prepared using a straight-dough process. After the raw materials are measured out, the individual ingredi­ ents are blended with water in a dough trough. Subsequently, they are worked in a c olumn mixer to form a medium-stiff dough, which is left to rest. After resting, the dough is formed by a d ivider into loaves, which are divided into portions and placed in greased baking tins to prove fully. After proving, the loaves are placed in cov­ ered tins in a steam-filled deck oven or rotary oven, where they are baked. After baking, the products are turned out of their tins and loaded on to trolleys to cool. They are then divided by a cutter into slices, which are placed on a toasting belt or on baking sheets and toasted. After toasting, the slices are placed on racks and are packaged when thoroughly cooled.

3.5. Specific rules concerning slicing, grating, packaging, etc. of the product the registered name refers to The product must be packaged at the production site. This is because of its fragility and the fact that it easily absorbs ambient humidity, and also to improve product traceability.

3.6. Specific rules concerning labelling of the product the registered name refers to The designation ‘Karlovarský suchar’ must appear on the packaging. No specific labelling requirements are laid down as regards positioning, lettering, colour, etc.

4. Concise definition of the geographical area The area of the , bordered by the municipalities of Karlovy Vary — Šemnice — — Ostrov — Hroznětín — Mezirolí — Stará Role — Karlovy Vary, including those municipalities.

5. Link with the geographical area The defined geographical area is historically linked with spa tourism and thermal springs and waters. Karlovy Vary water is famous and unique by virtue of its properties and comes from the Karlovy Vary thermal springs, which are amongst the most important and best known in the world. The fact that the sources issue at the precise spot mentioned is due to a fault fracture in the earth's crust and the crossing of significant faults in the area surround­ ing the Karlovy Vary thermal spring.

Karlovarský suchar is specific owing in particular to its reputation and the long-standing tradition of production in the defined geographical area of Karlovy Vary, its crispness, easy digestibility and dietary benefits.

For several decades, the producer has used the traditional method of producing Karlovarský suchar only in the defined geographical area specified in point 4. Karlovarský suchar is a p roduct which is considered to be part of the local colour of Karlovy Vary alongside the spa treatment and mineral waters, and contributes towards the inter­ national reputation of this spa.

Karlovarský suchar contains Karlovy Vary thermal spring water, which must be fresh. Karlovy Vary thermal spring water improves and eases digestion and intestinal absorption.

The causal link between the geographical area of Karlovy Vary and Karlovarský suchar can be seen in the historical connection between the production of Karlovarský suchar in the defined geographical area and the use of local mineral water in its production. Karlovy Vary is a s pa famed for its curative waters. In addition, there is a long-s tanding tradition — and hence local people have experience — of producing Karlovarský suchar, which is used in dietetic programmes that are part of spa treatment.

Reference to publication of the specification (Article 6(1), second subparagraph, of this Regulation)

http://www.upv.cz/dms/vestnik/vestnik_spolecny/2014/vestnik_50-2014.pdf#page=143

Official Gazette No 50, 10.12.2014, p. 143 et seq.

ISSN 1977-091X (electronic edition) ISSN 1725-2423 (paper edition)

EN