DOCSLIB.ORG

Standard Specifications for Street and Drainage Construction

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Standard Specifications for Street and Drainage Construction STANDARD SPECIFICATIONS FOR STREET AND DRAINAGE CONSTRUCTION 2 of 114 DIVISION 100. GENERAL PROVISIONS ................................ 6 Section 101. Definitions and Terms........................................................................ 6 Section 102. Control of Material ............................................................................. 9 Section 103. Quality Control Requirements.......................................................... 11 Section 104. Measurement and Payment............................................................. 15 Section 105. Roadway Construction Control........................................................ 18 Section 106. Trench and Excavation Safety Systems .......................................... 20 DIVISION 200. EARTHWORK ............................................... 21 Section 201. Clearing and Grubbing .................................................................... 21 Section 202. Excavation and Embankment.......................................................... 22 Section 203. Subgrade Preparation ..................................................................... 27 Section 204. Select Grading................................................................................. 28 DIVISION 300. STORM DRAINAGE..................................... 30 Section 301. Storm Drainage Pipe ....................................................................... 30 Section 302. Drop Inlets and Junction Boxes....................................................... 33 Section 303. Concrete Box Culverts..................................................................... 35 Section 304. Vacant ............................................................................................. 36 Section 305. Open Channels................................................................................. 36 Section 306. Filter Blanket and Riprap .................................................................. 39 Section 307. Flowable Select Material .................................................................. 40 DIVISION 400. BASE AND PAVING..................................... 42 Section 401. Aggregate Base Course .................................................................. 42 Section 402. Prime and Tack Coats ..................................................................... 43 Section 403. Asphalt Concrete Hot Mix................................................................ 45 3 of 114 Section 404. Asphalt Concrete Hot Mix Base Course .......................................... 50 Section 405. Asphalt Concrete Patching for Maintenance of Traffic...................... 51 Section 406. Asphalt Concrete Hot Mix Patching of Existing Roadway................. 52 DIVISION 500. MISCELLANEOUS CONSTRUCTION......... 53 Section 501. Concrete Curb and Gutter ............................................................... 53 Section 502. Concrete Sidewalks......................................................................... 55 Section 503. Driveway Construction or Reconstruction........................................ 56 Section 504. Headwalls and Retaining Walls ....................................................... 58 Section 505. Seeding and Sodding ...................................................................... 59 Section 506. Mailboxes ........................................................................................ 64 Section 507. Pavement Markings......................................................................... 65 Section 508. Street Signs..................................................................................... 68 Section 509. Erosion Control................................................................................ 69 Section 510. Traffic Control and Maintenance...................................................... 70 Section 511. Mobilization...................................................................................... 72 Section 512. Fences............................................................................................. 73 Section 513. Handicap Ramps ............................................................................. 77 Section 514. Project Signs ................................................................................... 78 Section 515. Handrail ........................................................................................... 79 Section 516. Cold Milling Asphalt Pavement........................................................ 81 DIVISION 600. MATERIALS ................................................. 82 Section 601. Cast-in-Place Concrete ................................................................... 82 Section 602. Reinforcing Steel ............................................................................. 96 DIVISION 700. TRAFFIC CONTROL FACILITIES ............... 99 Section 701. Actuated Controller......................................................................... 99 4 of 114 Section 702. Traffic Signal Head ....................................................................... 100 Section 703. Pedestrian Signal Head................................................................ 103 Section 704. Countdown Pedestrian Signal Head............................................. 105 Section 705. Traffic Signal Cable ...................................................................... 108 Section 706. Galvanized Steel Conduit ............................................................. 109 Section 707. Non-Metallic Conduit .................................................................... 110 Section 708. Concrete Pull Box......................................................................... 111 Section 709. Traffic Signal Mast Arm with Pole and Foundation ....................... 111 Section 710. Traffic Signal Pedestrian Pole with Foundation ............................ 112 Section 711. Traffic Signal Equipment Performance Test ................................. 113 Section 712. Video Detector with Radio Interface ............................................. 114 Section 713. Radio Communication System ..................................................... 115 Section 714. Electrical Conductors in Conduit................................................... 115 5 of 114 DIVISION 100. GENERAL PROVISIONS Section 101. Definitions and Terms 101.01 Abbreviations and Definitions. Whenever the following abbreviations are used in these specifications or on the plans, they are to be construed the same as the respective expressions represented: (a) Industry Abbreviations. ACI American Concrete Institute AASHTO American Association of State Highway and Transportation Officials ADEQ Arkansas Department of Environmental Quality AGC Associated General Contractors of America AHTD Arkansas State Highway and Transportation Department AIA American Institute of Architects AISC American Institute of Steel Construction AISI American Iron and Steel Institute ANSI American National Standards Institute ARA American Railway Association AREA American Railway Engineering Association ARTBA American Road and Transportation Builders Association ASCE American Society of Civil Engineers ASTM American Society for Testing and Materials ATSSA American Traffic Safety Service Association AWPA American Wood Preservers Association AWS American Welding Society AWWA American Water Works Association CoE U.S. Army Corps of Engineers CRSI Concrete Reinforcing Steel Institute FHWA Federal Highway Administration FSS Federal Specifications and Standards, General ITE Institute of Traffic Engineers MIL Military Specifications MUTCD Manual on Uniform Traffic Control Devices for Streets and Highways NEMA National Electrical Manufacturers Association OSHA Occupational Safety and Health Administration SAE Society of Automotive Engineers SSPC Steel Structures Painting Council UL Underwriter’s Laboratory USC United States Code 6 of 114 (b) Contract Abbreviations for Construction Work AC Asphalt Cement ACHM Asphalt Concrete Hot Mix ACTD Actuated ADJ Adjusted AGG Aggregate(s) ALUM Aluminum APPL Application APPR Approach ASPH Asphalt ASSY Assembly AST Asphalt Surface Treatment AUTO Automatic BIND Binder BIT Bituminous BLDG Building(s) BLDG Building(s) BLKT Blanket BNG(S) Bearing(s) BR Bridge(s) BST Bituminous Surface Treatment C & G Curb and Gutter CA Corrugated Aluminum cc cubic centimeter(s) CD Compacted Depth CEM Cement CL Class CLVT(S) Culvert(s) CM Corrugated Metal CMBN Combination CNTL Control, Controller COMP Compaction, CONC Concrete Controller CONST Construction CONT Continuous, CORR Corrugated Continuously CR Crushed CRS Course(s) CS Corrugated Steel CTD Coated CU,cu Cubic DBL Double DI Drop Inlet(s) DWY(S) Driveway(s) EMUL Emulsified EWK Earthwork EXC Excavation EXP Expansion F & I Furnish and Install FDN Foundation FES Flared End Section(s) FNC Fence(s) FURN Furnish, Furnishing GA Gage, Gauge GALV Galvanized GR Grade, Graded GRVL Gravel ha hectare(s) HI High Intensity HM Hot Mix HMA Hot Mix Asphalt HMAS Hot Mix Asphalt Stabilized INST Install, Installing, Installation j joule(s) kg kilogram(s) kL kilometer(s) km/h kilometers per hour KPa kilopascal(s) L liter(s) LAB Laboratory m meter(s) mm millimeter(s) MA Mineral Aggregate MAINT Maintenance MATL Material(s) MES Mitered End Section(s) MET Metal MG 1000 Gallons MIN Mineral MOB Mobilization MOD Modified MPa MegaPascal(s) 7 of 114 MRK Marking(s) msta metric station mton 1000 kilograms NO Number(s) NON MET Non-Metallic NON REINF Non-Reinforced NPDES National
Load more

Recommended publications
  • Asphalt Concrete Pavement Design­ a Subsystem to Consider the Fatigue Mode of Distress
    Asphalt Concrete Pavement Design­ A Subsystem to Consider the Fatigue Mode of Distress D. A. KASIANCHUK, Associate Professor of Engineering, Carleton University, Ottawa; C. L. MONISMITH, Professor of Civil Engineering, Institute of Transportation and Traffic Engineering, University of California, Berkeley; and W. A. GARRISON, Materials Testing Engineer, Contra Costa County Public Works Department, Martinez, California In this paper a working model is presented for a subsystem to consider the fatigue mode of distress for asphalt concrete pavements. The de­ sign subsystem is divided into three general sections-(a) preliminary data acquisition, (b) materials characterization, and (c) analysis and evaluation. In developing a particular design with this subsystem, use is made of traffic and wheel load distributions, environmental condi­ tions based on available weather records for the vicinity of the pro­ posed design, multilayer elastic theory, resilient response of untreated granular materials and fine-grained soils, stiffness and fatigue char­ acteristics of the asphalt concrete, and a cumulative damage hypothesis based on the simple linear summation of cycle ratios. To expedite the design process, the majority of the design computations have been pro­ grammed for use with a high-speed digital computer. An example shows the use of the design procedure for a structural pavement section consisting of asphalt concrete resting directly on the subgrade soil. The design developed is shown for conventional mate­ rials and traffic to result in a thickness that is quite reasonable based on comparisons with other design methods. This particular subsystem would appear to have some advantages, however, in that it can be ex­ tended to consider loading conditions and material characteristics for which experience is not available.
    [Show full text]
  • Caltrans Proves Effectiveness of Pavement Renewal Approach 14
    TR NEWS NUMBER 232 MAY–JUNE 2004 3 Get In, Get Out, Stay Out! Caltrans Proves Effectiveness of Pavement Renewal Approach Kirsten R. Stahl and Mario A. Gutierrez Six years ago, a national workshop convened to discuss and develop innovative 3 approaches to the timely repair of crowded freeways. The California Department of Transportation, host of the workshop, immediately set out to apply the most workable concepts. Here is a report on the successful results with asphalt concrete and portland cement concrete projects. 4 Renewal Program Awaiting Launch Ann M. Brach 5 Birth of the Accelerated Construction Technology Transfer Team Frederick D. Hejl 6 Accelerated Construction Technology Transfer Workshops: 14 Completing Projects Faster, Safer, and Better Bill Bolles 8 Mix and Structure of I-710’s Long-Lasting Pavement Carl L. Monismith 12 CA4PRS Software Generates Pavement Rehabilitation Strategies Eul-Bum Lee, John T. Harvey, and Michael M. Samadian 14 The AASHO Road Test: Living Legacy for Highway Pavements 35 Kurt D. Smith, Kathryn A. Zimmerman, and Fred N. Finn The AASHO Road Test, conducted more than four decades ago, established many standards and protocols and helped define many pavement design, construction, and evaluation practices for rigid and flexible pavements. How did the pioneering project originate, gain support, develop, proceed, and produce such long-lasting, influential results? 23 Withstanding the Test of Time Fred N. Finn 24 Smithsonian to Archive Road Test Records Linda Mason 25 TRANSIT COOPERATIVE RESEARCH PROGRAM REPORT Cover: The new Transit Capacity and Quality of Service Manual assists The New Transit Capacity and Quality of Service Manual: planners in setting transit service Tour of the Expanded Guide for Transit Planners and Operators goals for a community.
    [Show full text]
  • Chapter 3 : Transportation (V1)
    Town of Aberdeen - Development Guide Chapter 3 : Transportation (v1) Chapter 3 : Transportation 3.1. - Traffic Impact Analysis 3 3.1.1. - Purpose 3 3.1.2. - Threshold 3 3.1.3. - Review 4 3.1.4. - Format 4 3.2. - Driveway Design Standards 7 3.2.1. - Non-residential Driveways 7 3.2.2. - Residential Driveways 7 3.3. - Separation Standards 8 3.4. - Street Construction Standards 9 3.4.1. - General Standards. 9 3.4.2. - Trench Backfill Standards 10 3.4.3. - Subgrade Standards 11 3.4.4. - Proof Roll 11 3.4.5. - Other Standards 12 3.4.6. - Fire Apparatus Requirements 13 3.4.7. - Intersections 13 3.5. - Sight Distances 15 3.5.1. - Intersection Sight Distance 15 3.5.2. - Minimum Stopping Sight Distance 15 3.5.3. - Intersection Sight Distance 15 3.5.4. - Greenway Sight Distance 17 3.6. - Right-of-way Design 17 3.6.1. - Arterial Streets 17 3.6.2. - Collector Streets 18 3.6.3. - Sub-Collector Streets 19 3.6.4. - Local Streets 20 3.6.5. - Alleys 21 3.7. - Dead-End Streets 22 3.7.1. - Dead-End Street Standards 22 3.7.2. - Turnaround Standards 22 3.8. - Street Signs 23 3.8.1. - Street Name and Traffic Control Signs. 23 3.8.2. - Street Name Sign Fees 23 3.8.3. - Standards for All Street Signs 23 3-1 Town of Aberdeen - Development Guide Chapter 3 : Transportation (v1) 3.8.4. - Specialty Street Signs 24 3.8.5. - Standards for Street Name Signs 25 3.8.6.
    [Show full text]
  • Pavement Preservation How: Arizona, Texas, Utah, and New Mexico Edc-4 Peer-To-Peer Exchanges
    Tech Brief PAVEMENT PRESERVATION HOW: ARIZONA, TEXAS, UTAH, AND NEW MEXICO EDC-4 PEER-TO-PEER EXCHANGES PAVEMENT INTRODUCTION PRESERVATION HOW On May 2nd and 3rd, 2019, an FHWA-sponsored EDC- The fourth round of Every Day 4 “How” Pavement Preservation State Peer-to-Peer Counts (EDC-4) innovations promoted quality construction Exchange was conducted in Phoenix, Arizona. State and materials practices that department of transportation (DOT) participants included apply to both flexible and 28 DOT representatives from Arizona, 1 from Texas, 2 rigid pavements. For flexible pavements, these include using from Utah, and 1 from New Mexico. Additional participants included improved specifications for thin 4 FHWA representatives, 1 consultant, and representatives from 5 county asphalt surfacings such as chip governments, 24 municipalities, and 9 tribal communities. Larry Galehouse seals, scrub seals, slurry seals, with the National Center for Pavement Preservation and Larry Scofield with the micro surfacing, and ultrathin bonded wearing courses; following International Grooving & Grinding Association and American Concrete Pavement improved construction practices; Association facilitated the day-and-a-half-long meeting. Arizona was the host state and and using the right equipment provided meeting room facilities. Antonio Nieves of the FHWA introduced the meeting to place these treatments. Rigid pavement treatments include the background and kicked off the meeting. rapid retrofitting of dowel bars to The meeting format consisted of each of the states identifying their current procedures, reduce future faulting; the use of new, fast-setting partial- and full- issues, and successes for each of the topics discussed. Table 1 indicates the depth patching materials to create discussion topics.
    [Show full text]
  • Pavement Marking Handbook
    Pavement Marking Handbook August 2004 © 2004 Texas Department of Transportation All rights reserved Pavement Marking Handbook August 2004 Manual Notices Manual Notice 2004-1 To: Recipients of Subject Manual From: Carlos A. Lopez, P.E. Traffic Operations Division Manual: Pavement Marking Handbook Effective Date: August 2004 Purpose and Content This handbook provides information on material selection, installation, and inspection guidelines for pavement markings. It is targeted for two audiences — engineering personnel and field personnel. The portion for engineering personnel provides information on selecting pavement marking materials for various applications. The portion for field personnel provides information on pavement marking installation and inspection. Additional information about TxDOT specifications, procedures, and standards applicable to pavement markings are included in an appendix. The manual may be used by designers to help with pavement marking material selection and inspectors in the field. Instructions This is a new manual, and it does not replace any existing documents. Content Cover Table of Contents Chapters 1 through 3 Appendix A & B Review History This manual is the product of a Texas Department of Transportation (TxDOT) research project. The TxDOT project director is Greg Brinkmeyer of the Traffic Operations Division. The research supervisor is Gene Hawkins of the Texas Transportation Institute (TTI). Tim Gates and Liz Rose of TTI developed most of the material in the handbook. Wade Odell was the research liaison engineer for the TxDOT Research and Technology Implementation Office. (continued...) Review History (continued) This handbook became a reality because numerous individuals were willing to contribute their time, ideas, and comments during the development process. Special credit should be given to a group of TxDOT staff who meet on a regular basis to review drafts and develop material for the handbook.
    [Show full text]
  • Guidelines for Identifying and Repairing Localized Areas of Distress in Ac Pavements Prior to Capital Preventive Maintenance Or Rehabilitation Repairs
    APPENDIX B GUIDELINES FOR IDENTIFYING AND REPAIRING LOCALIZED AREAS OF DISTRESS IN AC PAVEMENTS PRIOR TO CAPITAL PREVENTIVE MAINTENANCE OR REHABILITATION REPAIRS I. Background Information A. AC Pavement Distress Terminology and Definitions 1) AC Pavement Cracks a) Alligator Cracks Alligator cracking is characterized by interconnected or interlaced cracks in the wheel path, forming a series of small polygons, (generally less than 1 foot on each side). The cracking resembles the appearance of alligator skin, thus the term alligator cracking. Alligator cracking is a load-related distress and occurs when the wheel loads exceed the design of the roadbed. b) Longitudinal Cracks [Shrinkage Cracks, Reflection Cracks, Joint Cracks, Edge Cracks and Slippage Cracks] Longitudinal cracks are non-load-associated cracks. Longitudinal cracks are single cracks approximately parallel to the centerline. These cracks are primarily due to the contraction and shrinkage of the surface course, reflection from underlying pavement joints, poorly constructed paving joints, or roadbed settlement. c) Transverse Cracks Transverse cracks are non-load-associated cracks. Transverse cracks appear approximately at right angles to the centerline. These cracks are primarily due to the contraction and shrinkage or the surface course or reflection from underlying pavement joints. 2) AC Surface Distortions a) Rutting Rutting is a longitudinal surface depression in the wheel path caused by the consolidation in the asphalt surface layer or lateral movement in one or more of the layers of roadbed material under heavy loads. b) Shoving Shoving is localized displacement or bulging of pavement material in the direction of loading pressure. Shoving is often associated with bleeding or over rich asphalt mix.
    [Show full text]
  • GLOSSARY of TERMS1 Aggregate Base (AB) - a Base Course Consisting of Compacted Mineral Aggregates
    ACKNOWLEDGMENT OF SPONSORSHIP This work was sponsored by the American Association of State Highway and Transportation Officials, in cooperation with the Federal Highway Administration, and was conducted in the National Cooperative Highway Research Program, which is administered by the Transportation Research Board of the National Research Council. DISCLAIMER This is the final draft as submitted by the research agency. The opinions and conclusions expressed or implied in the report are those of the research agency. They are not necessarily those of the Transportation Research Board, the National Research Council, the Federal Highway Administration, the American Association of State Highway and Transportation Officials, or the individual states participating in the National Cooperative Highway Research Program. APPENDIX A — GLOSSARY OF TERMS1 aggregate base (AB) - A base course consisting of compacted mineral aggregates. Also, granular base (GB), unbound granular base. aggregate interlock - A load transfer mechanism whereby the shear is carried by the aggregate-cement paste interface. aggregate subbase (ASB) - A subbase course consisting of compacted mineral aggregates. Also, granular subbase, unbound granular subbase. alligator cracking - Interconnected or interlaced cracks forming a pattern that resembles an alligator's hide. Also, map cracking. alternatives - Differing paving or rehabilitation courses of action that will satisfy established pavement design and management objectives. analysis period - The time period used for comparing design alternatives. An analysis period may contain several maintenance and rehabilitation activities during the life cycle of the pavement being evaluated. annual average daily truck traffic (AADTT) - The estimate of typical truck traffic on a road segment for all days of the week over the period of a year.
    [Show full text]
  • Stormwater Best Managementpractices (BMP's
    Spills This is one in a series of pamphlets describing storm drain protection measures. Other pamphlets include: Stormwater Sweep up dry spilled materials Automotive Maintenance & Car Care Best ManagementPractices immediately. Never attempt to bury (BMP’s): them or “wash them away” with water. Equipment Rentals Clean up spills on dirt areas by digging Food Service Industry up and properly disposing of contaminated soil. Fresh Concrete & Mortar Application Report significant spills to the appropriate spill response agencies General Construction & Site Supervision immediately. Heavy Equipment and Earthmoving Activities Clean up leaks, drips, and other spills immediately. Home Repair & Remodeling Never hose down “dirty” pavement or Horse Owners and Equine Industry surfaces where materials have spilled. Kennels Roadwork and Paving Recycling & Hazardous Landscaping, Gardening & Pest Control Waste Disposal Safe Environmental Habits and Mobile Washers and Cleaners Procedures for: Nurseries City of Modesto Road Crews Solid Waste Management Painting (209) 577-5494 Construction Crews Roadwork and Paving Seal Coat Contractors Stanislaus County Swimming Pool, Jacuzzi & Household Hazardous Waste Facility Fountain Maintenance (209) 525-4123 Home Builders For more information about storm drain protection or additional pamphlets, call: Developers To Report a Clogged Storm Drain General Contractors City of Modesto City of Modesto Inspectors Water Quality Control Division Stormwater Program (209) 577-6200 Site Supervisors To Report a Spill or Illegal Dumping www.modestogov.com (209) 577-6377 City of Modesto Environmental Compliance Section Water Quality Control Division Public Works Department Environmental Compliance Section (209) 577-6200 City of Modesto Public Works Department Water Pollution Prevention Use check dams, ditches or berms to divert runoff around excavations.
    [Show full text]
  • Chip Seals for High Traffic Pavements
    24 TRANSPORTATION RESEARCH RECORD 1259 Chip Seals for High Traffic Pavements SCOTT SHULER Chip seals have been successfully used on highways with traffic problems. To accomplish this objective, this paper has been volumes in excess of 5,000 vehicles per day. The performance divided into three parts as follows: life of those chip seals averages 6 to 7 years, with some appli­ cations lasting much longer. Unfortunately, a significant number • Problems and Suggested Solutions, of chip seals have not performed adequately. Some agencies refuse • Desirable Equipment, and to use this potentially cost effective approach to pavement reha­ bilitation and maintenance as a consequence. By developing a • Alternative Techniques. more fundamental understanding of the causes of chip seal fail­ ures on high traffic volume facilities, improved design methods, Facilities with traffic in excess of 7 ,500 vehicles per day in construction materials and methods, equipment, and specifica­ one direction on four lanes will be considered as high traffic tions can be developed. These improved procedures will form for purposes of this paper. the basis of implementation packages that will encourage state highway administrations and other public agencies to utilize chip seals on high-volume pavements. Reasons for chip seal failure on high traffic volume facilities and methods that have been used to PROBLEMS AND SUGGESTED SOLUTIONS overcome these difficulties are described. In addition, methods are described for predicting potential adhesive qualities of chip Chip seals are not used frequently in the United States and seal binders by using a modification of the Vialit procedure. Also, Canada on high traffic volume facilities.
    [Show full text]
  • Public Road Standards
    PUBLIC ROAD STANDARDS COUNTY OF SAN DIEGO DEPARTMENT OF PUBLIC WORKS March 2012 TABLE OF CONTENTS Page SECTION 1 INTRODUCTION.........................................................................................................1 1.1 INTRODUCTION............................................................................................................................. 1 l.2 PURPOSE .......................................................................................................................................... 1 1.3 EXCEPTIONS .................................................................................................................................. 1 SECTION 2 GENERAL DEFINITIONS .........................................................................................2 2.1 GENERAL DEFINITIONS ............................................................................................................. 2 2.2 OTHER DOCUMENTS ................................................................................................................... 4 SECTION 3 GENERAL POLICY .....................................................................................................6 3.1 PLANS TO BE APPROVED BY DIRECTOR, DEPARTMENT OF PUBLIC WORKS ......... 6 3.2 WHERE NO STANDARD IS SPECIFIED .................................................................................... 6 3.3 PAYMENTS FOR IMPROVEMENTS .......................................................................................... 6 3.4 WIDENING AND IMPROVEMENT OF EXISTING
    [Show full text]
  • Impact of Hurricane Katrina on Roadways in the New Orleans Area
    Impact of Hurricane Katrina on Roadways in the New Orleans Area Technical Assistance Report No. 07-2TA by Kevin Gaspard, Mark Martinez, Zhongjie Zhang, Zhong Wu LTRC Pavement Research Group Conducted for Louisiana Department of Transportation and Development Louisiana Transportation Research Center The contents of this report reflect the views of the authors who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the views or policies of the Louisiana Department of Transportation and Development or the Louisiana Transportation Research center. This report does not constitute a standard, specification or regulation. March 2007 ii ABSTRACT On August 29, 2005, Hurricane Katrina devastated New Orleans and southeastern Louisiana, leaving hundreds of thousands either displaced or homeless. Nearly four weeks later, Hurricane Rita made landfall in the southwestern portion of the state, further damaging Louisiana’s infrastructure and impacting the New Orleans area. In response, LTRC personnel conducted pavement testing on several on-going construction projects that were submerged to determine if contract modifications would be necessary to address damage impact. Damage was found in asphalt and concrete layers, and subgrades were found to be very weak. For one project, LA 46, LTRC had “before and after” data which indicated that the damage incurred was equivalent to three inches of asphalt concrete. As a result, LaDOTD contracted with Fugro Consultants, LP, to conduct testing on 238 miles of state highways in New Orleans at 0.1 mile intervals. Fugro conducted Falling Weight Deflectometer, Ground Penetrating Radar, and Dynamic Cone Penetrometer testing along with coring selected locations for thickness and damage verification to determine the extent of structural damage to these pavements.
    [Show full text]
  • B2 – Asphalt Concrete
    B2 – Asphalt Concrete Asphalt concrete has the characteristics of the mixtures that used to be known as bitumen macadam. Bituminous mixtures have four components — coarse aggregate, fine aggregate, filler and bitumen. The difference between the many bituminous mixtures produced in the UK is based on the proportions of these four components. In general terms, just over half of an asphalt concrete mixture is coarse aggregate — the aggregate retained on a 4mm size test sieve. Slightly less than half is fine aggregate passing a 4mm size test sieve. The remainder of the mixture consists of small and almost equal percentages of filler and bitumen. Mixtures with the largest coarse aggregate size have a lowest proportion of bitumen. The maximum size of the coarse aggregate varies according to the intended use of the mixture: 32mm is the largest size, 4mm is the smallest. Asphalt concretes are continuously-graded mixtures. There is a proportion of every aggregate fraction within the mixture. Full details are given in: BS Guidance: PD 6691, Asphalt – Guidance on the use of BS EN 13108 Bituminous Mixtures, Material Specifications Standard: BS EN 13108-1, Bituminous mixtures – material specifications. Part 1: Asphalt concrete BS EN 13108-1 replaced: BS 4987-1 Coated macadam (asphalt concrete) for roads and other paved areas. Part 1: Specification for constituent materials and asphalt mixtures The BS EN 13108 Standards present a menu of specification requirements from which individual specifications can be selected. Not all of the requirements in the Standard are appropriate to UK applications. The guidance in PD 6691 is important. Mixture designation The BS EN Standards use a system of mixture designation based on four sections.
    [Show full text]