DOCSLIB.ORG

Cable Operated Throttle Hog Throttle Bodies* Super Stock™ Stealth Air Cleaner Kit*

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cable Operated Throttle Hog Throttle Bodies* Super Stock™ Stealth Air Cleaner Kit* THE DRAG SPECIALTIES JULY 2017 dragspecialties.com 1022-0190 1022-0193 CABLE OPERATED 1022-0182 1022-0186 THROTTLE HOG THROTTLE BODIES* • Sealed, stainless steel throttle shaft with dual roller bearings for smooth • More air flow for improved performance operation and no air leaks • Choose from 58mm for stock or mildly built engines, or the whopping • Black powder coat finish matches stock 66mm for big inch engines • Throttle bodies include hardened steel flanges and seals • Requires throttle body specific Stealth air cleaners (available separately) for 58mm and 66mm bodies NOTE: Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (405) on all • One-piece throttle body/ manifold design for easy installation and T-Series engines produced 10/1/12 and later. If you are not sure stock appearance which manifold should be ordered, check fitment with the stock • Compatible with stock sensors, fuel rail and throttle cables manifold first. FOR 06-17 TWIN CAM, S&S HOT SETUP KITS AND T-SERIES LONG BLOCKS W/ CABLE OPERATED THROTTLE PART # DESCRIPTION SUG. RETAIL 58MM 1022-0191 For 98", 103", 106", 107", S&S 117" Hot Setup kit and 124" Hot Setup kit (w/ S&S +.032" heads only), $699.95 S&S T-Series engines (engines produced after 10/1/12), 405 size manifold 1022-0192 For S&S T-Series 111" engines produced prior to 10/1/12, 398 size manifold 699.95 1022-0190 For S&S T-Series 124" engines w/ S&S bolt pattern and 124" Hot Setup kit 699.95 (w/ stock or standard S&S heads produced prior to 10/1/12), 417 size manifold 66MM 1022-0194 For 98", 103", 106", 107", S&S 117" Hot Setup kit and 124" Hot Setup kit (w/ S&S +.032" heads only), 699.95 S&S T-Series engines (engines produced after 10/1/12), 405 size manifold 1022-0195 For S&S T-Series 111" engines produced prior to 10/1/12, 398 size manifold 699.95 1022-0193 For S&S T-Series 124" engines w/ S&S bolt pattern and 124" Hot Setup kit 699.95 (w/ stock or standard S&S heads produced prior to 10/1/12), 417 size manifold FOR 02-05 TWIN CAM, S&S HOT SETUP KITS AND T-SERIES LONG BLOCKS W/ CABLE OPERATED THROTTLE PART # DESCRIPTION SUG. RETAIL 58MM 1022-0182 For 97", 98", and S&ST-Series engines (engines produced after 10/1/12), 410 size manifold size $699.95 1022-0184 For S&S T-Series 111" engines produced prior to 10/1/12, 398 size manifold 699.95 1022-0185 For S&S 117" Hot Setup kits, 408 size manifold 699.95 1022-0183 For S&S T-Series 124" engines produced prior to 10/1/12, 417 size manifold 699.95 66MM 1022-0187 For 97", 98", and S&ST-Series engines (engines produced after 10/1/12), 410 size manifold size 699.95 1022-0189 For S&S T-Series 111" engines produced prior to 10/1/12, 398 size manifold 699.95 1022-0188 For S&S 117" Hot Setup kits, 408 size manifold 699.95 1022-0186 For S&S T-Series 124" engines produced prior to 10/1/12, 417 size manifold 699.95 SUPER STOCK™ STEALTH AIR CLEANER KIT* • Kit includes backing plate, filter and hardware • Built-in stinger cone directs air smoothly into the bore of the carburetor or EFI throttle body and reduces turbulence and increases flow • Made in the U.S.A. NOTE: Kit does not come with outer cover. Must use S&S PART # DESCRIPTION SUG. RETAIL Stealth air cleaner covers except Airstream 1010-2183 For 15-17 XG 750/ 500 $134.95 (sold separately; see page 643 of 17 FatBook™). *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES THE DRAG SPECIALTIES JULY 2017 MAGNAFLOW EXHAUST Made-in-the-USA MagnaFlow is a global leader in exhaust design, innovation, technology, and state-of-the-art manufacturing. With superior quality, power and sound MagnaFlow delivers performance exhaust systems with best-in-market styling and finishes that are engineered to enhance the riding experience. Their Pro Dual headers you see here for ’17 Dressers reflect their complete commitment to exhaust excellence – start to finish. 1802-0369 PRO DUAL HEADERS* 1802-0370 • Revolutionary style, performance and engineering come together in one innovative design 1 • Pro-Duals feature MagnaFlow’s exclusive non-blueing, Magna-Black coated, • Bold 2 /2" full-coverage heat shields provide a dynamic stance on your bike 3 stainless steel, 1 /4" headpipes that reduce heat on the rider’s leg • 12mm and 18mm O2 sensor ports allow for maximum tuning options • Pro-Duals offer tuned-length headpipes for improved and better balanced • Choose MagnaFlow Dresser mufflers to complete your performance exhaust flow that helps generate power to the ground with an enhanced feel upgrade package or use any 95-16 OEM-style Dresser mufflers on the throttle • Made in the U.S.A. • Ideal for tuned engines requiring increased flow or stock engines looking for improved output • NOTE: Must use 95-16 OEM-style mufflers with these headers. FOR 17 FLHT/ FLHX/ FLHR/ FLTRX/ FLTRU PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL 1802-0369 Chrome $489.95 1802-0370 Black $559.95 2 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES LOS ANGELES CHOPPERS Here is a group of hands-on U.S.A. craftsmen that have developed, designed and built award-winning customs for years. Today they incorporate what they have learned building one-of-a-kind rides into producing functional and stylish new products like the Tru Power slip-ons you see here for your late model Bagger owners. These mufflers are loaded with premium features that your discerning riders have been demanding. Give them a look and a listen today. 1801-1136 1801-1135 1801-1138 1801-1137 4" TRU POWER SLIP-ON MUFFLERS* • Chrome mufflers include CNC-machined billet • Dyno perfected to optimize torque and performance “Stealth” tips in chrome or shiny black ceramic finish • Sleek, no-weld design • Black ceramic coat mufflers include CNC-machined billet chrome “Stealth” tips or matching black ceramic coat finish tips • Race-proven technology; perforated core baffles provide awesome sound and great acceleration • Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo • Beautiful hand-polished triple-plated chrome finish or new vibrant • Mufflers sold in pairs black ceramic coat that will take the heat without discoloring • Made in the U.S.A. FOR 17 FLHT/ FLHR/ FLHX/ FLTRX/ FLTRU (EXCEPT H-D TRIKE MODELS) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL CHROME BLACK 1801-1135 W/ chrome tips $499.95 1801-1137 W/ chrome tips $529.95 1801-1136 W/ gloss black tips 499.95 1801-1138 W/ gloss black tips 529.95 1 ® 1 /4" OUTLAWZ CHUBBY HANDLEBARS • Handlebars are 25% thicker than stock 0601-3914 • All bars are precision machined (not swage formed) at control mounts, providing perfect fit, form and unsurpassed look 0601-3915 • Designed with fluid bends at precise angles for maximum comfort and control • Pre-drilled for internal wiring • All handlebars work with Throttle-By-Wire as well as cable applications • Polished welds and diamond knurled • Made in the U.S.A. • Work with hydraulic clutch, stock and most custom controls, stock Springer risers and top clamps NOTE: All bars work with H-D® heated grips. • Available in show-chrome finish or Blackout series featuring NOTE: Not for use with stock risers and handlebar clamp/ gauge a semi-gloss black finish to match OEM black switch housings mount on 883C/ 1200C models. CHROME PART # SUG. RETAIL BLACK PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-3914 $325.95 0601-3915 $325.95 16" Springer Ape Hangers 16" 33.5" 9.5" 8" *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 3 THE DRAG SPECIALTIES JULY 2017 1800-2173 LONG ROAD RAGE III STAINLESS 2-INTO-1 SYSTEMS* 3 7 • Features stepped, 1 /4" to 1 /8", equal-length headpipes designed for maximum performance • Included heat shields cover enough of the headpipes for heat protection but end inches from the collector to show 1800-2174 off the stainless steel and hand TIG welding • Tapered, megaphone-style, long muffler body or 4” Straight Can muffler body; systems mount off of traditional saddlebag location • Systems come with 18mm and 12mm Oxygen ports with sensors, adapters, and plugs • Includes removable baffle and end cap • Made in the U.S.A. FOR 95-16 FLHT/ FLHR/ FLHX/ FLTR PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL 1800-2173 Long megaphone $1,199.95 1800-2174 Long 4” straight can $1,199.95 SHORT ROAD RAGE III STAINLESS 2-INTO-1 SYSTEM* 3 7 • Features stepped, 1 /4" to 1 /8", equal-length headpipes designed for maximum performance • Included heat shields cover enough of the headpipes for heat protection but end inches from the collector to show off the stainless steel and hand TIG welding • Tapered, megaphone-style, short muffler body; system mounts off of transmission for that truly radical short look • System comes with 18mm and 12mm Oxygen ports with sensors, adapters and plugs • Includes removable baffle and end cap • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1800-2172 For 95-16 FLHT/ FLHR/ FLHX/ FLTR $1,199.95 4 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES 1800-2171 ROAD RAGE II MEGA POWER 2-INTO-1 SYSTEMS* • Designed specifically to address the needs of tuned motors built for high-horsepower applications 3 7 • Features equal-length 1 /4"-1 /8" stepped headpipes • Tapered megaphone-style muffler body with 4" black billet end cap with contrasting machined flutes 1800-2170 • Includes full-coverage heat shields • Oxygen sensor ports and plugs (12mm and 18mm) PART # DESCRIPTION SUG.
Load more

Recommended publications
  • (Trunk) Lid, Sheet Metal, Rocker Panels
    Floorpans • Rocker Panels • Trunk Pans (Group 12) 1942-1948 All Super and Roadmaster Rocker Panels (12.934) All floor pans, trunk pans and RP428L............ (L.H.OUTER PANEL) ..............$79.50 ea. inner rocker panels are made RP428R........... (R.H.OUTER PANEL) ..............$79.50 ea. of 18 gauge coated steel. Outer rocker panels are made of 20 gauge coated steel. 1949 All Super and Roadmaster Panels are custom made and Rocker Panels for 4-dr. Models. (12.934) usually take a week or so to RP49L4.............. (L.H.OUTER PANEL) ............$79.50 ea. fabricate. RP49R4............. (R.H.OUTER PANEL) ............$79.50 ea. 1950 All; 1937-1940 All Special 1951-1953 Super, Roadmaster, Skylark. Floor Pans (Front and Rear) (12.980) Front Toeboards (12.980) FP370FFL................(FRONT LEFT) .................$94.50 ea. TB503L.......................(LEFT) ...........................$94.50 ea. FP370FFR...............(FRONT RIGHT) ...............$94.50 ea. TB503R.....................(RIGHT) ..........................$94.50 ea. FP370RFL.................(REAR LEFT) ..................$94.50 ea. FP370RFR...............(REAR RIGHT) .................$94.50 ea. Floor Pans (Front and Rear) (12.980) FP503FFL...............(FRONT LEFT) ..................$94.50 ea. 1939-1940 All Super and Roadmaster FP503FFR.............(FRONT RIGHT) .................$94.50 ea. Floor Pans (Front and Rear) (12.980) FP503RFL................(REAR LEFT) ...................$94.50 ea. FP390FFL................(FRONT LEFT) .................$94.50 ea. FP503RFR..............(REAR RIGHT) ..................$94.50 ea. FP390FFR...............(FRONT RIGHT) ...............$94.50 ea. FP390RFL.................(REAR LEFT) ..................$94.50 ea. Under Seats (Front and Rear) (12.980) FP390RFR...............(REAR RIGHT) .................$94.50 ea. FP503FSL............(13" FRONT LEFT)...............$99.50 ea. FP503FSR..........(13" FRONT RIGHT) .............$99.50 ea. 1940-1941 All Super and Roadmaster FP503RSL...............(REAR LEFT)..................$149.00 ea. Rocker Panels for 4-dr.
    [Show full text]
  • Honda Insight Emergency Response Guide, May 2001 11 Copyright  2001, American Honda Motor Co., Inc
    Emergency Response Guide A Gasoline-Electric Hybrid Prepared for Fire Service, Law Enforcement, Emergency Medical and Professional Towing Personnel By American Honda Motor Co., Inc., May 2001 Location of Key Components Fuel Lines Fuel Tank Gasoline Engine IPU Compartment Electric Motor with High- Transmission Voltage Battery 12V High-Voltage Battery Cables 12V Battery IPU Compartment Gasoline Engine, with High- Electric Motor & Voltage Battery Transmission High-Voltage Fuel Tank Cables 2 Vehicle Description Type, Size, Shape & Materials The Insight is a two-passenger gasoline-electric hybrid, the first vehicle sold in North America that utilizes both a conventional gasoline engine and a battery-powered electric motor for power. The Insight can be identified by its aerodynamic shape and rear fender skirts, as illustrated on the front cover, and by the Insight logo and the words “Gasoline-Electric Hybrid” on the rear hatch. The chassis and most components are made of aluminum, some parts are plastic, and a few are made of magnesium. Gasoline Engine The Insight’s main power source is a conventional 1.0 liter, 3- cylinder gasoline engine, located under the hood. Electric Motor During start-up and acceleration, the gasoline engine is assisted by an ultra-thin (2.3 inch/60mm wide) electric motor, located between the engine and the transmission. During braking and Gasoline Engine Electric Motor 12V Battery deceleration, the motor acts as a generator to recharge the high- voltage battery and the 12-volt battery. Turning the ignition switch to either the Accessory (I) or the Lock (0) position turns off the gasoline engine and the electric motor.
    [Show full text]
  • Genuine Parts & Quality Reproductions
    2009 Genuine Parts & Quality Reproductions PRICES IN THE PDF CATALOGS ARE SUBJECT TO CHANGE Please use the links for "Online Inventory" to access our online database for the most current prices or call. Providing Quality Service Since 1993 Contact Information Early Ford V8 Sales Inc. was founded in 1993 and has been providing quality Ford auto parts and accessories OFFICE HOURS (Eastern Time): to customers ever since. To date we have grown into a Monday - Friday, 8 a.m. - 5 p.m. HowHow ToTo FindFind UsUs 12,000 square foot warehouse with over 10,000 items. Store sales during the above listed hours and by We are a full line provider of reproduction and original appointment at mutually convenient times on the parts for 1928-1966 Ford passenger and pickup trucks. weekends. Please call ahead to make sure we Our entire catalog is now available online for your will be available. convenience. Search our extensive database of Ford products and accessories! TOLL FREE ORDER: ..............800-417-3347 Our web site will help you learn more about our company, (Outside New York State) find answers to your most common questions, and order any of our over 4,500 parts and accessories. CUSTOMER SERVICE: ........518-884-2824 If you don’t see what you are looking for call us and ask. FAX: ......................................... 518-884-2633 Our staff is always ready to assist you with technical ORDER ON-LINE .........EARLYFORD.COM questions. Early Ford V-8 Sales, Inc. is a full line supplier of 1928 through 1966 Early V-8 parts as well as Quality Model Call before 4:00 pm for same day shipping.
    [Show full text]
  • Safety Instructions & Operators Manual
    Safety Instructions & Operators Manual ™ ™ Congratulations for buying a Country Clipper product. Your Country Clipper Zero Turn Radius Riding Mower was designed and built to provide long and trouble free service. Keep in mind that it, like any other mechanical device, can be potentially dangerous if used improperly, and hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the equipment. Study this manual and pay special attention to the important Safety Precautions on pages 3-5. Following these instructions will help you continue to enjoy the trouble-free performance expected of the Country Clipper product. P-13148 TABLE OF CONTENTS MODEL NUMBER’S & SERIAL NUMBER’S ........................................................................... 2 SAFETY ......................................................................................................................................... 3 ACCIDENT PATTERNS TO AVOID ........................................................................................................... 3 SAFETY INSTRUCTIONS AND RECOMMENDATIONS ........................................................................ 3 SAFETY INTERLOCK SYSTEM ................................................................................................................. 5 START UP AND OPERATION .................................................................................................... 6 CHECKLIST
    [Show full text]
  • 1 Technical Specifications Heavy Duty Sixty-Foot Electric Low Floor Transit Buses
    10/25/2019 Rev. 0 TECHNICAL SPECIFICATIONS HEAVY DUTY SIXTY-FOOT ELECTRIC LOW FLOOR TRANSIT BUSES 1 10/25/2019 Rev. 0 Contents TS 1. Scope .................................................................................................................................................. 9 TS 2. Definitions ............................................................................................................................................ 9 TS 2.1 Abbreviations ............................................................................................................................ 14 TS 3. Referenced Publications.................................................................................................................... 15 TS 4. Legal Requirements .......................................................................................................................... 15 TS 5. Overall Requirements ........................................................................................................................ 16 TS 5.1 Weight ....................................................................................................................................... 16 TS 5.2 Capacity .................................................................................................................................... 16 TS 5.3 Service Life ............................................................................................................................... 16 TS 5.4 Maintenance and Inspection ....................................................................................................
    [Show full text]
  • Quick Reference Index Section Illustration Text
    ILLUSTRATION CAR BODY 1 H I L L S T H U N D E R B I R D C E N T E R 2 Quick Reference Index 1955-57 Thunderbird Section Illustration Text Index .................................................................................................................................. 3-6 General Information, Paint Codes & Trim Codes ........................................................ 7-8 Interior, Upholstery……………………………………….……………8 ..................... 9-13 Repaint Body Gasket & Seal Kits ...................................................................................... 14 Exterior Chrome & Emblems Kits ................................................................................... 15 Radio, Speakers, Antenna’s, Radio Parts ................................................................... 16-17 Stamp Kit Set… ................................................................................................................... 17 H Wheels & Brake (1000-2999)….……18-19…...…....20-25, 29 I Suspension & Steering (3000-3999)…….…26-28….…......25-35, 39 L Rear Axle & Drive train (4000-4999)…….…36-37 .................... 38-39 L Exhaust System & Frame (5000-5999)……….26, 37… ................ 41-42 S Rear Suspension (5000-5999)…………..37 ..................... 40-41 Engine (6000-6999)….…....43-44 ..................... 45-47 T Transmission Standard-Automatic (7000-7999)…..…...48-50 .................... 51-55 H Cooling System & Grille (8000-8999)…...….56-57 ..................... 58-60 U Fuel & Carburetor (9000-9999)…….....61-64 ....................
    [Show full text]
  • Ford 1935 Cars Grille
    cott’s Wes Auto Restying 1935 Passenger Stock and Street Rod Hoods Steel Hoods by Rootlieb Grille, Hood, Fenders & Running Boards 1 piece top Louvered Smooth 4 Piece hood Stock Hood top includes center hinge. Side panels are complete with hood handles and hinge rods. One piece top panel does not have cutout for ornament. 3 piece Side panels do not have handles. Hood Grille Ornament hinges and top panel braces not 3 piece hood Ornament, Chromed included, sold separatly. with sides 4 8 -8215 110.00 ea Ford Emblem Chrome with blue background 4 0 -8212-B 20.00 ea Accessory Greyhound Chrome, Mounts to ornament Stock Plain 4 8 -8100-G not.avbl 1935 Passenger Grille Grille: 4 8 -8200 not.avbl Hot Rod Scoop Grille trim set with mount clips: 4 Piece 3 Piece Stainless Steel Top, Smooth 48-16710 500.00 ea 48-16710-3 575.00 ea 4 8 -8234 135.00 ea Top, 6 rows louvers 48-16710-L 675.00 ea 48-16710-3L 725.00 ea Grille trim mount clip set (34 pcs): Sides, Stock louvers 48-16712 not.avbl 48-16713 not.avbl 4 8 -20001 10.00 set Sides, Hot Rod Louvers 48-16712-H 325.00 pr 48-16713-H 325.00 pr Sides, Plain 48-16712-P 325.00 pr 48-16713-P 325.00 pr Grille Bug Screen Sides, Scoop 48-16712-S 650.00 pr 48-16713-S 650.00 pr 4 8 -18700 65.00 ea Hood Lacing on Grille or Cowl Grille Inner Baffel 4 0 -16739-S Grille: 1933-35 Pass, fabric w/rivets 17.50 ea 4 8 -16740-S Cowl: 1935 Passenger, fabric, w/screws 20.00 ea Fiberglass H R -16739 Foam rubber, 3/8” x 3/16” (most rad shells) 100.00 ea H R -16740 Foam rubber, 5/8” x 3/8” (most cowls) 125.00 ea G S P35P 175.00 ea Hinge and Braces for 3-Piece Hoods Top panel Top Panel Braces braces Hood Side Trim & Hardware 3/8” round steel braces provide extra support.
    [Show full text]
  • The Automobile from Horseless Carriage to Everyday Technology
    Part I: The Automobile From Horseless Carriage to Everyday Technology by Arthur D. Delagrange, Massachusetts Beta ’64 F ONE PIECE OF TECHNOLOGY had to be cho- The development of the modern automobile is a micro- sen to represent twentieth-century America, a cosm of the development of modern engineering. The story likely candidate would be the automobile or, more is recounted here, both for those young people who would precisely, the presence of a car in every household, like to know how we went about achieving personal land on the average. (There are more cars than licensed rockets that sit in massive traffic jams, and for the old-tim- idrivers.) The microcomputer is certainly impressive, but ers who long for the good-old days when cars wouldn’t start every new car has at least one of these plus a host of other in cold weather, boiled over in hot weather, and wouldn’t highly-developed parts. The machines that produce these stop in wet weather. cars, nearly au- tomatically, are marvels in themselves. If engineering is Origins: The 1700s science in quan- The history of the automobile can be conveniently divided tity, then the au- into three periods: the 19th century (and earlier!) and the tomobile is an first and last halves of the 20th century. That break may be engineering mas- taken at WWII as civilian car production ceased during the terpiece. Not war and resumed immediately afterward—pre-war models. only is auto-mak- The first section is short. Steam-powered vehicles were ing the biggest demonstrated in the latter half of the 18th century, the first industry in the practical application being traction engines (tractors) avail- U.S., it supports a able in the 1770s.
    [Show full text]
  • Vehicle Inspection Form
    American Freedom PHYSICAL DAMAGE INSPECTION/ Insurance Company 1699 Wall St. Suite 600 MECHANICAL STATEMENT REPORT Mount Prospect, IL 60056 Date of Inspection: Time: Insurer Name: Policy No.: Insured’s Name: Insured’s Address City: State: Zip: Inspector: (Print) Inspection Site: (Name/Address) Description of Vehicle: Color: Body Style: Year: Make: Model: Vehicle Identification Number: (Obtain directly from vehicle, dash or EPA sticker) From: Odometer Reading: (Must be completed) Discrepancies Between Numbers: Plate Number: State: Garaged At: Mark (X) Damaged Areas Chipped or Broken Glass Bumper (Rear) Fender Skirts Scratch Trunk Side Molding Dent Hood-Grill Windshield Missing Hubcaps(s) Top Rear Window Faded Paint Right Side Side Glass Bumper (front) Left Side Tires Is there existing body or paint damage marked above? If so, describe: _______________________________________________________ _________________________________________________________________________________________ Is there existing glass damage marked above? If so, describe:______________________________________________________________ _________________________________________________________________________________________ Have any modifications been made to this vehicle? No Yes: describe____________________________________________________ _________________________________________________________________________________________ Interior Condition: Good Fair Poor, explain______________________________ Exterior Condition: Good Fair Poor, explain______________________________
    [Show full text]
  • 2018 SOFTAIL DELUXE SPECS Classic
    By Koz Mraz Photos by Brian Nelson Yea, you’ve heard all about the brand new Harley-Davidson Softail line, lighter weight, bigger motors, and better suspension all married to brand new frames. It’s all true and don’t get me wrong, that’s great but really, I just wanted a cool vintage looking motorcycle. With all H-D’s newfangled technology they must know that nostalgia and antique design also caters to the young buyer demographic…vintage is hip. Bingo! The 2018 Softail Deluxe and Heritage 2018 SOFTAIL DELUXE SPECS Classic. The Motor Company delivers classic good looks with modern technology. The current Lean Angle, Right (deg.): 28 Brakes, Caliper Type: 4-piston DRIVETRAIN Engine Torque: 109 ft-lb @ Softail Deluxe traces its lineage back to 1949 when fxed front and 2-piston foating 30000 rpm Harley-Davidson first mounted hydraulic front Lean Angle, Left (deg.): 28 rear Engine: Milwaukee-Eight® 107 forks to replace the springer front ends on their Fuel System: Electronic rigid FL frames to beget the Hydra-Glide. It’s Wheels, Front Type: Chrome Tires, Front Specifcation: Bore x Stroke: 3.937 in. x 4.374 Sequential Port Fuel Injection no coincidence that the faux-rigid Softail frames Steel Laced MT90B16 72H in. (ESPFI) allow the original geometry to shine through in the upper lines that drop uninterrupted from steering Wheels, Rear Type: Chrome Tires, Rear Specifcation: Displacement: 107 cu in Exhaust: 2-into-2 shorty dual; stem to rear axle. A design that truly mimics the Steel Laced MU85B16 77H catalyst in muffer look of these old hardtails, but hard ride it’s not.
    [Show full text]
  • Regulations Respecting Vehicle Equipment, Safety and Inspection
    Draft for consultation purposes only Regulations Respecting Vehicle Equipment, Safety and Inspection made by the Minister of Transportation and Infrastructure Renewal under Section 150 of Chapter 29 of the Acts of 2018, the Traffic Safety Act Part 1: Interpretation 1 Citation These regulations may be cited as the Vehicle Equipment, Safety and Inspection Regulations. 2 Definitions In these regulations, “Act” means the Traffic Safety Act; “adopted” means adopted and incorporated by reference; “antique vehicle” means a vehicle that is eligible to be issued an antique number plate under the Vehicle Document Regulations; “CSA standard” means a standard developed and published by the Canadian Standards Association; “equipment manufacturer”, in relation to equipment installed or used in a vehicle, means the manufacturer of the equipment; “federal legislation” means the Motor Vehicle Safety Act (Canada) and the regulations made under that Act that apply to vehicle equipment; “federal standard” means a standard set out in the federal legislation; “Motor Vehicle Safety Regulations” means the Motor Vehicle Safety Regulations made under the Motor Vehicle Safety Act (Canada); “nighttime” means the period of time between 1/2 hour after sunset and 1/2 hour before sunrise on the following day; Page 1 of 151 “OEM”, in relation to a vehicle, means the original equipment manufacturer and refers to the manufacturer of the equipment that was installed or used in the vehicle at the time the vehicle was manufactured; “SAE standard” means a standard developed and published by the Society of Automotive Engineers International; “spot lamp” means a lamp of high intensity that may be mounted on a motor vehicle and that can be operated and directed from inside the motor vehicle; “Vehicle Document Regulations” means the Vehicle Document Regulations made under the Act.
    [Show full text]
  • ULTIMATE JAGUAR PARTS SPECIALIST SNG Barratt Jaguar XJ40/X300 Parts Catalogue Component Section Buyultimate On-Line at JAGUAR PARTS SPECIALIST
    ULTIMATE JAGUAR PARTS SPECIALIST SNG Barratt Jaguar XJ40/X300 Parts Catalogue Component Section BuyULTIMATE on-line at www.sngbarratt.com JAGUAR PARTS SPECIALIST With over 30 years experience in supplying Jaguar parts, SNG Barratt Group are the World’s largest independent specialists, with a Head Office in the UK and branches in the USA, France and Holland. We stock and supply parts for Jaguar cars from 1949 right through to the present day. At SNG Barratt we have always prided SNG Barratt has also received recognition from ourselves on maintaining a high standard Jaguar by being awarded Authorised Parts both in terms of the service we offer and the Distributor status in the UK. This enables us to range of parts which we supply. Our in-house order stock directly from the factory on a daily manufacturing and supply network allows us basis and gain access to parts and knowledge to produce an extensive range of parts from for both classic and current models. The ongoing switch gears, electrical motors, petrol tanks, success of SNG Barratt can be credited to the to chromium plated bumper parts and body highest levels of quality, service and attention rubbers. Continued investment in the Jaguar to detail. Continued investment in technology marque ensures the availability of otherwise and our people raise these standards and will obsolete parts thus safeguarding the future of best help us to offer continued excellence to many historically important vehicles. our customers. +44 (0) 1746 765432 +1 603 622 1050 +33 3 85 201 420 +31 13 52 11 552 PAGE 2 Page 2 [email protected] [email protected] [email protected] [email protected] SNG Barratt Jaguar XJ40/X300 EARLYParts Catalogue SALOONS INTRODUCTION Componentwww.sngbarratt.com Section Buy on-line at www.sngbarratt.com WELCOME HOW TO USE THIS CATALOGUE SNG Barratt first started to sell and remanufacture Jaguar Use the illustration in each section to identify the component components in the 1970’s.
    [Show full text]