QR-Card.fm Page 1 Monday, June 1, 2015 2:26 PM

16-Position Receiving and Transmitting Select Knob m Antenna ASTRO® APX™ 8000 Series ______1 Select zone/channel. Digital Portable Radios 2 Listen for a transmission. On/Off/Volume Quick Reference Card Top Control Knob OR RF Energy Exposure and Product Safety Display Press and hold Volume Set button. Guide for Portable Two-Way Radios Microphone OR ATTENTION! Press Monitor button and listen for activity. This radio is restricted to Occupational use only. Before using Top Side (Select) the radio, read the RF Energy Exposure and Product Safety Button Main 3 Adjust volume, if necessary. Guide for Portable Two-Way Radios which contains important ______Speaker operating instructions for safe usage and RF energy awareness 4 Press the PTT button to transmit; release to and control for Compliance with applicable standards and PTT Button Regulations. receive. Radio Controls Bluetooth Side Button 1 Sending an Emergency Alarm Pairing ______3-Position A/B/C Indicator Switch 1 Press and hold the Emergency button*. Top (Orange) ______Button 2 The display shows Emergency and the ______Battery current zone/channel. Radio sounds a short, Side Button 2 ______medium-pitched tone, and the LED blinks red Microphone 2-Position momentarily. Concentric Switch ______Radio On/Off 3 When acknowledgment is received, you hear Main Display • On – On/Off/Volume knob clockwise. four beeps; alarm ends; and radio exits Accessory emergency. Connector Menu Select • Off – On/Off/Volume knob counterclockwise. Buttons * Default timer of Emergency button press to Data Feature Zones and Channels activate Emergency is 50 milliseconds. This Home Button Button timer is programmable, see Emergency • Zone – Toggle the Zone switch or use the Operation in the user guide for details. radio menu to the desired zone. Keypad 4-Way Navigation Button To exit emergency at any time, press and hold • Channel – Turn the Channel knob or use the the Emergency button. radio menu to the desired channel. *PMLN7287A* PMLN7287A MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2015 by Motorola Solutions, Inc. All Rights Reserved. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. 06/15 1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A. English QR-Card.fm Page 2 Monday, June 1, 2015 2:26 PM

Sending an Emergency Call The more stripes, the stronger the On = Secure operation. 1 Press the Emergency button. v signal strength for the current site m Off = Clear operation. (trunking only). Blinking = Receiving an encrypted 2 Press and hold the PTT button. Speak clearly Direct radio to radio communication or voice call. into the microphone. O connected through a repeater. On = AES Secure operation. 3 Release the PTT button to end call. On = Direct Off = Clear operation. Off = Repeater Blinking = Receiving an encrypted 4 Press and hold Emergency button to exit voice call. This channel is being monitored. emergency. M On = GPS enabled, and signal To exit emergency at any time, press and hold L = Radio is set at Low power. G available. HOR . the Emergency button. H = Radio is set at High power. Off = GPS disabled. Blinking = GPS enabled, but signal Scanning a scan list. Sending a Silent Emergency Call i unavailable. 1 Press the Emergency button. Blinking dot = Detects activity on the On = User is currently associated with Priority-One Channel the radio. 2 The display does not change; the LED does n during scan. Off = User is currently not associated not light , and there is no tone. j Steady dot = Detects activity on the with the radio. 3 Silent emergency continues until you: Priority-Two Channel Blinking = Device registration or user Press and hold the Emergency button to exit during scan. registration with the server failed due to an invalid emergency state. The vote scan feature is enabled. OR k username or pin. Press and release the PTT button to exit the On steady = View mode Data activity is present. Silent Emergency Alarm mode and enter Blinking = Program mode o regular dispatch or Emergency Call mode. b Bluetooth is ready. To exit emergency at any time, press and hold Bluetooth is connected to the device. the Emergency button. a Display Status Icons ® Menu Navigation The radio Wi-Fi network is connected. The number of bars displayed Receiving a call or data. u < or > to Menu Entry. represent the signal strength of the Wi-Fi signal. Transmitting a call or data. t {, |, or } directly below Menu U or D to scroll through sub-list. 8 Blinks when the battery is low. Entry to select. {, |, or } directly below Menu H to exit. Entry to select. English