TDS FC-053（CAS 311-89-7）Perfluorotributylamine

Total Page：16

File Type：pdf, Size：1020Kb

TDS FC-053（CAS 311-89-7）Perfluorotributylamine

TDS Anhui Sinograce Chemical Co., Ltd. FC-053（CAS 311-89-7）perfluorotributylamine cas: 311-89-7 Name: perfluorotributylamine,Tri(perfluorobutyl)amine; tri(1,1,2,2,3,3,4,4,4-nonafluorobutyl)amine;Tri(nonafluorobutyl)am ine;Fluosol 43;PFTBA;Perfluorotributylamine;1-Butanamine, 1,1,2,2,3,3,4,4,4-nonafluoro-N,N-bis(nonafluorobutyl)-;1,1,2,2,3,3, 4,4,4-nonafluoro-N,N-bis(1,1,2,2,3,3,4,4,4-nonafluorobutyl)butan-1 BASIC -amine;PFTBA,Perfluorotributylamine;nonafluoro tributylamine; Fluorocarbon FC43;HEPTACOSAFLUOROTRIBUTYLAMINE; INFORMATION Tris(nonafluorobutyl) amine;Perfluoro-compound FC-43§3; Tris(perfluorobutyl)amine; Molecular formula: C12F27N Molecular weight: 671.09200 PSA: 3.24000 LOGP: 8.56550 Appearance and properties: transparent colorless liquid Density: 1.883 g/mL at 25 °C(lit.) Boiling point: 178 °C(lit.) Melting point: -52 °C PHYSICAL Freezing point: -60℃ INDEX Flash point: None Refractive index: n20/D 1.3 Water solubility: insoluble Stability: Stable under normal temperatures and pressures. Storage conditions: 2-8ºC Anhui Sinograce Chemical Co., Ltd. Add.: Hefei city, Anhui province, China Tel: +86-0551-63459511 Mob: +86 15755193346 Email: [email protected] Web: www.sinogracechem.com TDS Anhui Sinograce Chemical Co., Ltd. Steam density: 23.3 (vs air) Vapor pressure: 1.3 mm Hg (25 °C) RTECS number: YA1000000 Safety instructions: S26-S36 Hazard category code: R36/37/38 SECURITY WGK Germany: 2 INFORMATION Dangerous goods mark: Xi production method From tributylamine and hydrogen fluoride through electrolytic fluorination. The electrolysis product is washed with water, alkali washed, dried, and rectified to obtain a finished product. use PRODUCTION 1. Anti-corrosion isolation of instruments and meters, transmission fluid. 2. Dielectric insulating liquid 3. Chemical reaction stable METHODS diluent or special solvent, solvent. 4. Heat conduction heat coolant, AND can be used in transformers, especially as small transformer oil in APPLICATION high-rise buildings. 5. Anti-oxidant lubricant. 6. Fluorocarbon emulsion artificial blood. 7. Electronic components and devices Anhui Sinograce Chemical Co., Ltd. Add.: Hefei city, Anhui province, China Tel: +86-0551-63459511 Mob: +86 15755193346 Email: [email protected] Web: www.sinogracechem.com.

Copy Link

Recommended publications

4. Industrial Processes and Product
4. Industrial Processes and Product Use The Industrial Processes and Product Use (IPPU) chapter includes greenhouse gas emissions occurring from industrial processes and from the use of greenhouse gases in products. The industrial processes and product use categories included in this chapter are presented in Figure 4-1. Greenhouse gas emissions from industrial processes can occur in two different ways. First, they may be generated and emitted as the byproducts of various non-energy- related industrial activities. Second, they may be emitted due to their use in manufacturing processes or by end- consumers. In the case of byproduct emissions, the emissions are generated by an industrial process itself, and are not directly a result of energy consumed during the process. For example, raw materials can be chemically or physically transformed from one state to another. This transformation can result in the release of greenhouse gases such as carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and fluorinated greenhouse gases (e.g., HFC-23). The greenhouse gas byproduct generating processes included in this chapter include iron and steel production and metallurgical coke production, cement production, lime production, other process uses of carbonates (e.g., flux stone, flue gas desulfurization, and glass manufacturing), ammonia production and urea consumption, petrochemical production, aluminum production, HCFC-22 production, soda ash production and use, titanium dioxide production, ferroalloy production, glass production, zinc production, phosphoric acid production, lead production, silicon carbide production and consumption, nitric acid production, adipic acid production, and caprolactam production. Greenhouse gases that are used in manufacturing processes or by end-consumers include man-made compounds such as hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride (NF3).
[Show full text]
Control No. 1-5-54-01174(1F)
I 1: L I Y ,e- .- l THE DEVELOPMENT OF STRUCTURAL ADHESIVE I I SYSTEMS SUITABLE FOR USE WITH LIQUID OXYGEN ~ il Jerome Hollander, Floyd D. Trischler, and Edward S. Harrison ANNUAL SUMMARY REPORT I11 1 July 1965 to 30 June 1966 July 1966 , Prepared under Contract No. NAS 8-11068 Control No. 1-5-54-01174(1F) WHITTA-KER COR-PORATION Narmco Research & Development Division San Diego, California 92123 N e k (ACCESSION NUMBER) I (THRU) ea > - (PAGES) i (CODE) 2 (NASA CR OR TUX OR AD NUMBER) (CATEGORY) Propulsion and Vehicle Engineering Division 1'I! National Aeronautic s and Space Administration George C. Marshall Space Flight Center Huntsville, Alabama FOREWORD This report was prepared by Whittaker Corporation, Narmco Research 6 Development Division, under Contract No. NAS 8-11068, Control KO. 1-5-54- 01174(1F), entitled "The Development of Structural Adhesive Systems Suitable for Use with Liquid Oxygen," for the George C. Marshall Space Flight Center of the National Aeronautics and Space Administration. The work was adminis- tered under the direction of the Propulsion and Vehicle Engineering Division, Engineering Materials Branch, with Dr. W. E. Hill acting as project officer. The research work was conducted in Narmco's laboratory by Dr. Jerome Hollander and Mr. Floyd D. Trischler, Senior Research Chemists, Mr. Edward S. Harrison, Research Chemist and Mr. Robert M. DeBorde, Research Technician. Also con- tributing to the research were Mr. Richard T. Rafter, Mr. Phillip N. Crabtree, Mrs . Beatrix Y. Sanders, and Mr. Jerry L. Kerkmeyer , Research Chemists. Dr. Jerome Hollander served as program manager. This report covers the period 1 July 1965 to 30 June 1966.
[Show full text]
Method for Preparing Polymeric Foams and Chemical Compositions Used Therefor
Europaisches Patentamt 19 European Patent Office Office europeen des brevets © Publication number : 0 498 628 A1 EUROPEAN PATENT APPLICATION (2j) Application number : 92300954.2 © int. ci.5 : C08G 18/10, C08J 9/00, // C08L75/04 (22) Date of filing : 04.02.92 (§) Priority : 04.02.91 GB 9102362 Inventor : Postema, Aaldrik Roelf Frieswijk 113 NL-1852 VG Heiloo (NL) @ Date of publication of application Inventor : Stanssens, Drik 12.08.92 Bulletin 92/33 Pastoorslindestraat 75, Bus 1 B-3620 Lanaken (BE) Inventor : Randall, David @ Designated Contracting States : Nachtegalenlaan 7 DE ES FR GB IT NL SE B-3078Everberg (BE) Inventor : De Vos, Rik Valleelaan 40a © Applicant : IMPERIAL CHEMICAL B-3110 Rotselaar (BE) INDUSTRIES PLC Imperial Chemical House, Millbank London SW1P 3JF (GB) (74) Representative : Leherte, Georges Maurice Lucien Marie et al Group Patents Services Dept., P.O. Box 6, (72) Inventor : Gillis, Herbert Russell Shire Park, Bessemer Road Unit 4, 8230 Crestview Drive Welwyn Garden City, Hertfordshire AL7 1HD Sterling Heights, Michigan 48077 (US) (GB) © Method for preparing polymeric foams and chemical compositions used therefor. © A method for the preparation of rigid foams by reacting an organic polyisocyanate with an isocyanate-reactive material in the presence of a blowing promoter characterised in that the iso- cyanate-reactive material comprises at least one isocyanate-reactive cyclic carbonate or isocyanate- reactive cyclic urea, the reaction being performed in the presence of an inert insoluble organic liquid which is present as the disperse phase of an emulsion or a microemulsion, and in the presence of a metal salt catalyst. 00 CM CO 00 o> LU Jouve, 18, rue Saint-Denis, 75001 PARIS EP 0 498 628 A1 This invention relates to polymeric foams and more especially to rigid polyurethane foams derived from organic polyisocyanates and to methods for their preparation.
[Show full text]
Elucidating CO2 Chemisorption in Diamine-Appended Metal–Organic Frameworks Alexander C
Elucidating CO2 Chemisorption in Diamine-Appended Metal–Organic Frameworks Alexander C. Forse,a,b,d Phillip J. Milner,a,e,† Jung-Hoon Lee,c,f Halle N. Redfearn,a Julia Oktawiec,a Rebecca L. Siegelman,a,e Jeffrey D. Martell,a Bhavish Dinakar,b,e Leo B. Porter-Zasada,a Miguel I. Gonzalez,a Jeffrey B. Neaton,*c,f,g Jeffrey R. Long,*a,b,e Jeffrey A. Reimer*b,e aDepartment of Chemistry, bDepartment of Chemical and Biomolecular Engineering, cDepartment of Physics, and dBerkeley Energy and Climate Institute, University of California, Berkeley, California 94720, U.S.A. eMaterials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, U.S.A. fMolecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, California 94720, U.S.A. gKavli Energy Nanosciences Institute at Berkeley, Berkeley, California 94720, U.S.A. ABSTRACT: The widespread deployment of carbon capture and sequestration as a climate change mitigation strategy could be facilitated by the development of more energy-efficient adsorbents. Diamine-appended metal–organic frameworks of the type diamine–M2(dobpdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobpdc4− = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) have shown promise for carbon capture applications, although questions remain regarding the molecular mechanisms of CO2 uptake in these materials. Here, we leverage the crystallinity and tunability of this class of frameworks to perform a comprehensive study of CO2 chemisorption. Using multinuclear nuclear magnetic resonance (NMR) spectroscopy experiments and van der Waals-corrected density functional theory (DFT) calculations for thirteen diamine–M2(dobpdc) vari- ants, we demonstrate that the canonical CO2 chemisorption products—ammonium carbamate chains and carbamic acid pairs—can be readi- ly distinguished, and that ammonium carbamate chain formation dominates for diamine–Mg2(dobpdc) materials.
[Show full text]
Perfluorotributylamine Safety Data Sheet 3132206 According to Federal Register / Vol
Perfluorotributylamine Safety Data Sheet 3132206 according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 08/04/2015 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form : Substance Substance name : Perfluorotributylamine CAS No : 311-89-7 Product code : 3132-2-06 Formula : C12F27N Synonyms : Perfluorotributylamine; HEPTACOSA; Tris(perfluorobut-1-yl)amine; Heptacosafluorotributylamine Other means of identification : MFCD00000436 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Laboratory chemicals Manufacture of substances Scientific research and development 1.3. Details of the supplier of the safety data sheet SynQuest Laboratories, Inc. P.O. Box 309 Alachua, FL 32615 - United States of America T (386) 462-0788 - F (386) 462-7097 [email protected] - www.synquestlabs.com 1.4. Emergency telephone number Emergency number : (844) 523-4086 (3E Company - Account 10069) SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture Classification (GHS-US) Skin Irrit. 2 H315 - Causes skin irritation Eye Irrit. 2A H319 - Causes serious eye irritation STOT SE 3 H335 - May cause respiratory irritation Full text of H-phrases: see section 16 2.2. Label elements GHS-US labeling Hazard pictograms (GHS-US) : GHS07 Signal word (GHS-US) : Warning Hazard statements (GHS-US) : H315 - Causes skin irritation H319 - Causes serious eye irritation H335 - May cause respiratory irritation Precautionary statements (GHS-US) : P261 - Avoid breathing fumes, mist, spray, vapors P264 - Wash skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves/protective clothing/eye protection/face protection P302+P352 - If on skin: Wash with plenty of soap and water P304+P340 - If inhaled: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes.
[Show full text]
Material Safety Data Sheet Creation Date 14-Jun-2010 Revision Date 14-Jun-2010 Revision Number 1
Material Safety Data Sheet Creation Date 14-Jun-2010 Revision Date 14-Jun-2010 Revision Number 1 1. PRODUCT AND COMPANY IDENTIFICATION Product Name Perfluoro-compound FC-43® Cat No. AC123770000; AC123770100; AC123771000; AC123772500 Synonyms Fluorinertº4 FC-43; Perfluoro-n-tributylamine Recommended Use Laboratory chemicals Company Entity / Business Name Emergency Telephone Number Fisher Scientific Acros Organics For information in the US, call: 800-ACROS-01 One Reagent Lane One Reagent Lane For information in Europe, call: +32 14 57 52 Fair Lawn, NJ 07410 Fair Lawn, NJ 07410 11 Tel: (201) 796-7100 Emergency Number, Europe: +32 14 57 52 99 Emergency Number, US: 201-796-7100 CHEMTREC Phone Number, US: 800-424- 9300 CHEMTREC Phone Number, Europe: 703- 527-3887 2. HAZARDS IDENTIFICATION CAUTION! Emergency Overview May cause skin, eye, and respiratory tract irritation. The toxicological properties have not been fully investigated. Appearance Colorless Physical State Liquid odor odorless Target Organs None known. Potential Health Effects Acute Effects Principle Routes of Exposure _____________________________________________________________________________________________ Page 1 / 7 Thermo Fisher Scientific - Perfluoro-compound FC-43® Revision Date 14-Jun-2010 _____________________________________________________________________________________________ Eyes May cause irritation. Skin May cause irritation. Inhalation May cause irritation of respiratory tract. Ingestion May cause irritation. Chronic Effects None known. See Section 11 for additional Toxicological information. Aggravated Medical Conditions No information available. 3. COMPOSITION/INFORMATION ON INGREDIENTS Haz/Non-haz Component CAS-No Weight % Perfluorotributylamine 311-89-7 >95 4. FIRST AID MEASURES Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Skin Contact Wash off immediately with plenty of water for at least 15 minutes.
[Show full text]
Equilibrium Critical Phenomena in Fluids and Mixtures
: wil Phenomena I Fluids and Mixtures: 'w'^m^ Bibliography \ I i "Word Descriptors National of ac \oo cop 1^ UNITED STATES DEPARTMENT OF COMMERCE • Maurice H. Stans, Secretary NATIONAL BUREAU OF STANDARDS • Lewis M. Branscomb, Director Equilibrium Critical Phenomena In Fluids and Mixtures: A Comprehensive Bibliography With Key-Word Descriptors Stella Michaels, Melville S. Green, and Sigurd Y. Larsen Institute for Basic Standards National Bureau of Standards Washington, D. C. 20234 4. S . National Bureau of Standards, Special Publication 327 Nat. Bur. Stand. (U.S.), Spec. Publ. 327, 235 pages (June 1970) CODEN: XNBSA Issued June 1970 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402 (Order by SD Catalog No. C 13.10:327), Price $4.00. NATtONAL BUREAU OF STAHOAROS AUG 3 1970 1^8106 Contents 1. Introduction i±i^^ ^ 2. Bibliography 1 3. Bibliographic References 182 4. Abbreviations 183 5. Author Index 191 6. Subject Index 207 Library of Congress Catalog Card Number 7O-6O632O ii Equilibrium Critical Phenomena in Fluids and Mixtures: A Comprehensive Bibliography with Key-Word Descriptors Stella Michaels*, Melville S. Green*, and Sigurd Y. Larsen* This bibliography of 1088 citations comprehensively covers relevant research conducted throughout the world between January 1, 1950 through December 31, 1967. Each entry is charac- terized by specific key word descriptors, of which there are approximately 1500, and is indexed both by subject and by author. In the case of foreign language publications, effort was made to find translations which are also cited. Key words: Binary liquid mixtures; critical opalescence; critical phenomena; critical point; critical region; equilibrium critical phenomena; gases; liquid-vapor systems; liquids; phase transitions; ternairy liquid mixtures; thermodynamics 1.
[Show full text]
Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2017 – Industrial Processes and Product
1 2 4. Industrial Processes and Product Use 3 The Industrial Processes and Product Use (IPPU) chapter includes greenhouse gas emissions occurring from 4 industrial processes and from the use of greenhouse gases in products. The industrial processes and product use 5 categories included in this chapter are presented in Figure 4-1. Greenhouse gas emissions from industrial processes 6 can occur in two different ways. First, they may be generated and emitted as the byproducts of various non-energy- 7 related industrial activities. Second, they may be emitted due to their use in manufacturing processes or by end- 8 consumers. 9 In the case of byproduct emissions, the emissions are generated by an industrial process itself, and are not directly a 10 result of energy consumed during the process. For example, raw materials can be chemically or physically 11 transformed from one state to another. This transformation can result in the release of greenhouse gases such as 12 carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), and fluorinated greenhouse gases (e.g., HFC-23). The 13 greenhouse gas byproduct generating processes included in this chapter include iron and steel production and 14 metallurgical coke production, cement production, lime production, other process uses of carbonates (e.g., flux 15 stone, flue gas desulfurization, and glass manufacturing), ammonia production and urea consumption, petrochemical 16 production, aluminum production, HCFC-22 production, soda ash production and use, titanium dioxide production, 17 ferroalloy production, glass production, zinc production, phosphoric acid production, lead production, silicon 18 carbide production and consumption, nitric acid production, adipic acid production, and caprolactam production.
[Show full text]
Section 2. Hazards Identification
Conforms to US OSHA Hazard Communication 29CFR1910.1200 SAFETY DATA SHEET GCMS Tuning Standard – Perfluorotributylamine, Part Number 05971-60571 Section 1. Identification 1.1 Product identifier Product name : GCMS Tuning Standard – Perfluorotributylamine, Part Number 05971-60571 Part no. : 05971-60571 Validation date : 11/20/2020 1.2 Relevant identified uses of the substance or mixture and uses advised against Material uses : Reagents and Standards for Analytical Chemistry Laboratory Use 1 x 0.5 ml 1.3 Details of the supplier of the safety data sheet Supplier/Manufacturer : Agilent Technologies, Inc. 5301 Stevens Creek Blvd Santa Clara, CA 95051, USA 800-227-9770 1.4 Emergency telephone number In case of emergency : CHEMTREC®: 1-800-424-9300 Section 2. Hazards identification 2.1 Classification of the substance or mixture OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Classification of the substance or mixture H315 SKIN IRRITATION - Category 2 H319 EYE IRRITATION - Category 2A H335 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation) - Category 3 2.2 GHS label elements Hazard pictograms : Signal word : Warning Hazard statements : H315 - Causes skin irritation. H319 - Causes serious eye irritation. H335 - May cause respiratory irritation. Precautionary statements Prevention : P280 - Wear protective gloves. Wear eye or face protection. P261 - Avoid breathing vapor. P264 - Wash thoroughly after handling. Response : P304 + P312 - IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Storage : P403 + P233 - Store in a well-ventilated place. Keep container tightly closed. Disposal : P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
[Show full text]
Perfluorotributylamine, MS Grade Safety Data Sheet 3132204 According to Federal Register / Vol
Perfluorotributylamine, MS Grade Safety Data Sheet 3132204 according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 08/04/2015 Revision date: 06/03/2021 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form : Substance Substance name : Perfluorotributylamine, MS Grade CAS No : 311-89-7 Product code : 3132-2-04 Formula : C12F27N Synonyms : Perfluorotributylamine; HEPTACOSA; Tris(perfluorobut-1-yl)amine; Heptacosafluorotributylamine Other means of identification : MFCD00000436 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Laboratory chemicals Manufacture of substances Scientific research and development 1.3. Details of the supplier of the safety data sheet SynQuest Laboratories, Inc. P.O. Box 309 Alachua, FL 32615 - United States of America T (386) 462-0788 - F (386) 462-7097 [email protected] - www.synquestlabs.com 1.4. Emergency telephone number Emergency number : (844) 523-4086 (3E Company - Account 10069) SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture Classification (GHS-US) Skin Irrit. 2 H315 - Causes skin irritation Eye Irrit. 2A H319 - Causes serious eye irritation STOT SE 3 H335 - May cause respiratory irritation Full text of H-phrases: see section 16 2.2. Label elements GHS-US labeling Hazard pictograms (GHS-US) : GHS07 Signal word (GHS-US) : Warning Hazard statements (GHS-US) : H315 - Causes skin irritation H319 - Causes serious eye irritation H335 - May cause respiratory irritation Precautionary statements (GHS-US) : P261 - Avoid breathing fumes, mist, spray, vapors P264 - Wash skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear protective gloves/protective clothing/eye protection/face protection P302+P352 - If on skin: Wash with plenty of soap and water P304+P340 - If inhaled: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes.
[Show full text]
Chapter 1, Choosing Between the Mass Balance and Emission Factor Approach)
Chapter 6: Electronics Industry Emissions CHAPTER 6 ELECTRONICS INDUSTRY EMISSIONS 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories 6.1 Volume 3: Industrial Processes and Product Use Authors Laurie Beu (USA) and Sebastien Raoux (France/USA) Yun Chung (Jack) Chang (USA), Michael Roger Czerniak (UK), Francesca Illuzzi (Italy), Tetsuya Kitagawa (Japan), Deborah Ottinger (USA) and Natalya Parasyuk (Ukraine) Contributing Authors Stephanie N. Bogle (USA), Shoumian Chen (China), Joseph Van Gompel (USA), Melissa Ann Gresham (USA), David Harman (USA), Kyungah Kim (Republic of Korea), Joey (Ching-Hui) Lu (Taiwan, Province of China), Youngsook Lyu (Republic of Korea), Brian K. Raley (USA) and Jennifer Politsch (USA) 6.2 2019 Refinement to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories Chapter 6: Electronics Industry Emissions Contents 6 Electronics Industry emissions ..................................................................................................................... 6.7 6.1 Introduction ........................................................................................................................................ 6.7 6.1.1 Overview of emissions and their sources ....................................................................................... 6.7 6.1.2 Summary of refinements ................................................................................................................ 6.8 6.2 Methodological Issues .....................................................................................................................
[Show full text]
Innovation in the Synthesis of Perfluorinated Organics Through Electrochemical Fluorination
Journal contents Innovation in the synthesis of perfluorinated organics through electrochemical fluorination in anhydrous liquid hydrogen fluoride: peculiarities of the method and applications of perfluorinated organics V.A. Matalin, G.I. Kaurova, D.D. Moldavskiy, V.G. Barabanov, O.V. Blinova Federal State Unitary Enterprise «Russian Scientific Center "Applied Chemistry", St.Petersburg, Russia (Financially supported by USA and performed under the contract to the International Science and Technology Center (ISTC), Moscow.) Electrochemical fluorination (hereinafter: ECF) is a method to introduce fluorine into organic or inorganic substrate through some electrode reactions. The ECF method involves passing of a direct current through a solution of some initial organic substance in anhydrous hydrogen fluoride. J.Simons (USA) developed the most part the ECF method in early 1940th [1]. ECF provides replacement of all hydrogens by fluorines, saturation of triple or double C=C bonds and aromatic systems with fluorine, and fragmentation of carbon skeletons, while functional groups and heteroatoms available in the original molecule stay untouched. ECF demonstrates a number of advantages over other methods of synthesis of perfluorinated organic substances: Hydrogen fluoride serves as the source of fluorine. This obviates the otherwise necessary stage of fluorine manufacture using hydrogen fluoride for the raw material. The needed equipment is relatively simple because the required electrolytic cell (electrolyzer) is a single chamber apparatus. In spite of inevitable destruction of the initial substance ECF allows conserving most of the functional groups or heteroatoms (N, O, S) available in the initial molecule. Among numerous perfluorinated substances produced by ECF there are perfluorinated tertiary amines, perfluoroethers and perfluorocarbons.
[Show full text]