Product Catalog

icsdiamondtools.com Petrol Power 695XL TECHNICAL SPECIFICATIONS

25cm, 40cm PowerGrit Bar Cutting Depth 30cm, 35cm, 40cm FORCE4 Powerhead Weight 9.6 kg Engine Speed 9300 +/- 150 rpm (max) Idling Speed 2700 +/- 100 rpm Horsepower 4.8 kW)@ 9000 rpm Engine Type 2-stroke, single cylinder, air cooled Displacement 94 cc

Powerhead 46 cm x 36 cm x 30 cm Dimensions

Guaranteed Sound 115 dB(A); (Kwa = 1.0 dB(A)) Power Level, Lwa (1)

Sound Pressure Level, at 104.6 dB(A): (K = 1.0 dB(A)) Operator’s Ear Lwa (1) Vibration, a hv, eq 3.6 m/s2 (K=0.2 m/s2) Front Handle Concrete Cutting (2) 3.1 m/s2 (K=0.2 m/s2) Rear Handle Vibration, a hv, eq 5.62 m/s2 (K=0.2 m/s2) Front Handle Pipe Cutting (2) 5.28 m/s2 (K=0.2 m/s2) Rear Handle

Water Supply Minimum of 1.4 bar 2010 Requirement 695 PG - Petrol Water Flow Minimum: 8 lpm Requirement Ductile Iron Pipe cut Portland, OR Fuel Mix Ratio 2% (50:1) fuel-to-oil Fuel Capacity 1.0 liter

(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432:2012 695XL-PG uilt to provide the best combination of performance and portablility for cutting in-ground utility pipe, the 695XL-PG Petrol Power Cutter with PowerGrit® chain will Bchange the way you cut pipe. The 695XL-PG offers unmatch power to weight ratio, allowing you to cut up to 40 cm deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining. All our power heads are designed for wet cutting and have integrated water delivery systems that reduce airborne particles during the cut. The 695XL-PG is capable of cutting the full line of 40 cm FORCE4® concrete cutting chains, meaning you can use the power cutter on masonry, stone, and even reinforced concrete - perfect for pipe taps, utility vaults, bridge work, and other utility applications.

695XL-PG PETROL POWER CUTTER AND CONSUMABLES PART NUMBER DESCRIPTION 575826 ICS 695XL F4 Powerhead ICS 695XL PG-16 Petrol Power Cutter Package with 575827 40 cm guidebar, PowerGrit-29 chain 537764 ICS PowerGrit 29, 40 cm chain 524490 ICS 695F4 Guidebar 40 cm 525496 ICS 695F4 Drive Sprocket 543904 ICS 695XL - F4/PG Tensioner Kit

2 icsdiamondtools.com | +32 10 201 251 Petrol Power 680ES TECHNICAL SPECIFICATIONS

25cm PowerGrit Bar Cutting Depth 30cm, 35cm FORCE3 Powerhead Weight 9.6 kg Engine Speed 11500 +/- 500 rpm (max) Idling Speed 2800-3200 rpm Horsepower 3.7 kW Engine Type 2-stroke, single cylinder, air cooled Displacement 76.5 cc Powerhead Dimensions 46 cm x 29 cm x 25 cm

Guaranteed Sound Power 117 dB(A): (Kwa = 3.0 dB(A)) Level, Lwa (1)

Sound Pressure Level, at 101.0 dB(A); (K = 2.0 dB(A)) Operator’s Ear Lwa (1) Vibration, a hv, eq Concrete 7.2 m/s2 (K=1.0 m/s2) Front Handle Cutting (2) 8.5 m/s2 (K=1.0 m/s2) Rear Handle Water Supply Requirement Minimum of 1.4 bar Water Flow Minimum: 8 lpm 2016 Fuel Mix Ratio 2% (50:1)fuel-to-oil 680ES - Petrol Fuel Capacity 0.88 liter Ductile Iron Pipe cut Portland, OR

(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001 and ISO22867:2011

680ES-PG uilt to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG petrol power cutter with PowerGrit chain will change the way to Bcut pipe. All our power heads are designed for wet cutting and have integrated water delivery systems that reduce airborne particles during the cut. This affordably priced petrol power cutter, allows you to cut up to 25 cm deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining and is also designed to run the full line of FORCE3 series chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this power cutter in masonry, stone and even reinforced concrete. Making it the most cost effective, versatile in your arsenal.

680ES-PG PETROL POWER CUTTERS AND CONSUMABLES PART NUMBER DESCRIPTION ICS 680ES PG-10 Petrol Power Cutter Package with 580423 25 cm FORCE4 guidebar, PowerGrit-25 chain 580424 ICS PowerGrit-25, 25 cm Chain 579158 ICS 680PG Guidebar 25 cm/25 segments 525496 ICS 680ES PowerGrit Drive Sprocket

73935 ICS 680ES Tensioner Kit

icsdiamondtools.com | +32 10 301 251 3 Hydraulic Power 890F4 PG TECHNICAL SPECIFICATIONS 30 lpm 45 lpm

Powerhead Weight 10.6 kg

Length 58.5 cm

Height 26.5 cm

Width 24 cm

Hydraulic Supply 30 lpm @ 172.5 bar 45 lpm @ 172.5 bar Hydraulic Fluid PC HYDREX MV32 or equivalent Requirements (Type) Water Supply Minimum: 1.5 bar Requirements Water Flow Minimum: 4 lpm 6,100 rpm 6,500 rpm (avg. free running) (avg. free running) Operating Speed 5,500 sfm 5,800 sfm (avg. free running chain) (avg. free running chain) Torque* 9.6 Nm 13.5 Nm 2011 Horsepower (1)* 4.5 kW 6.0 kW 880 F4 - Hydraulic Guaranteed Sound 107 dB(A) (K=0.2 dB(A)) Ductile Iron Pipe repair Power Level Lwa (2) Little , TX Equivalent Sound Pressure at the 98 dB(A) (K=0.7 dB(A))

Operator's Ear LpA (2) 2 2 Vibration ahv, eq 2.0 m/s (K=0.1 m/s ) Front Handle Concrete Cutting (3) 6.0 m/s2 (K=1.4 m/s2) Rear Handle

2 2 Vibration ahv, eq 4.6 m/s (K=0.1 m/s ) Front Handle 890 Series PowerGrit Cutting (3) 4.8 m/s2 (K=0.3 m/s2) Rear Handle

f you’re looking for the highest level of 890F4 HYDRAULIC POWER CUTTERS AND CONSUMABLES

performance and cutting capability, look PART NUMBER DESCRIPTION no further. The 890PG Hydraulic Power I 566357 ICS 890F4 Powerhead 30 l/m, 30 cm hose whips Cutter with PowerGrit® chain offers cutting 566356 ICS 890F4 Powerhead 30 l/m, 2.5 m hose whips depths of up to 63 cm in ductile iron, cast 566353 ICS 890F4 Powerhead 45 l/m, 30 cm hose whips iron, PVC, HDPE and Insituform lining. The 566354 ICS 890F4 Powerhead 45 l/m, 2.5 m hose whips deep cutting ability of the 890PG allows 566352 ICS 890F4-FL Powerhead 30 l/m, 30 cm hose whips the operator to make a single cut from one 566350 ICS 890F4-FL Powerhead 30 l/m, 2.5 m hose whips side meaning less excavation is required. ICS 890PG-15 Hydraulic Power Cutter Package with 38 cm 566123 All our power heads are designed for wet Guidebar, PowerGrit-29 chain cutting and have integrated water delivery 537764 ICS PowerGrit Chain 38 cm systems that reduce airborne particles 537765 ICS PowerGrit Chain 50 cm during the cut. The 890PG is capable of 545017 ICS PowerGrit Chain 63 cm operating the full line of FORCE4® concrete 523080 ICS 890F4 Guidebar 38 cm cutting chains, meaning you can use the 529767 ICS 890F4 Guidebar 50 cm power cutter on masonry, stone, and even 525320 ICS 890F4 Guidebar 63 cm reinforced concrete - perfect for pipe taps, 565065 ICS 890F4 Drive Sprocket utility vaults, bridge work, and other utility 565066 ICS 890F4-FLUSH Drive Sprocket applications. 70636 890F4 Tensioner Kit 523946 890F4-FL Tensioner Kit

(1)Measured using 18hp hydraulic power pack (30 lpm and * Output ratings based on maximum 23HP hydraulic power pack (45 lpm) at 2000psi/138 bar. input conditions and efficiency (2) Measured in accordance with ISO3744:2010 assumptions and may vary (3) Measured in accordance with ISO5349-1:2001 depending on power supply.

4 icsdiamondtools.com | +32 10 201 251 Pneumatic Power 701-A TECHNICAL SPECIFICATIONS

Powerhead Weight 13 kg Bar Length Up to 63 cm Powerhead Dimensions 58.5 cm x 26.5 cm x 30.5 cm Air Motor Power 5 kW

Air Supply Requirements 6 bar - 3.5 m³/min (maximum) Resin and acid-free Motor lubrication SAE 5 W to SAE 10 W oil

Water Pressure Minimum: 1.4 bar Requirements Water Flow Requirements Minimum: 8 lpm 5,700 rpm (average free running) Operating Speed 4,900 sfm (average free running chain) Vibration ahv, eq Front handle: 5.09 m/s2 (K=0.2 m/s2) Concrete Cutting (2) Rear handle: 5.07 m/s2 (K=0.2 m/s2) Vibration ahv, eq Front handle: 4.58 m/s2 (K=0.2 m/s2) 2015 PowerGrit Cutting (2) Rear handle: 4.43 m/s2 (K=0.2 m/s2) 701A - Pneumatic Guaranteed Sound Power 113 dB(A); (Kwa=0.5 dB(A)) Level Lwa (1) Ductile Iron pipe cutting Portland, OR (1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001 and ISO22867:2011

701-A PNEUMATIC POWER CUTTERS 701-A AND CONSUMABLES uilt tough to stand up to everyday use in the PART NUMBER DESCRIPTION harsh environment of utility pipe cutting. The 573511 ICS 701-A Powerhead ICS 701-A F4-15 Pneumatic Package ICS powerful pneumatic power cutter with 574173 B with 38cm guidebar, ProFORCE-29 chain PowerGrit® chain offers cutting depths of up to 63 cm in ductile iron, cast iron, PVC, HDPE and 537764 ICS PowerGrit Chain 38 cm Insituform lining. The deep cutting ability of the 537765 ICS PowerGrit Chain 50 cm 701-A allows the operator to make a single cut from 545017 ICS PowerGrit Chain 63 cm one side meaning less excavation is required. All our 523080 ICS 701-A Guidebar 38 cm power heads are designed for wet cutting and have 529767 ICS 701-A Guidebar 50 cm integrated water delivery systems that reduce 525320 ICS 701-A Guidebar 63 cm airborne articles during the cut. The 701-A is 565065 ICS 701-A Drive Sprocket capable of operating the full line of FORCE4® 575013 Airpac, pneumatic power cutter oiler concrete cutting chains, meaning you can use the 575130 Oiler, with hose whip 3/4 x 6ft. power cutter on masonry, stone, and even 70636 Tensioner Kit reinforced concrete - perfect for pipe taps, bridge work, and other utility applications.

icsdiamondtools.com | +32 10 301 251 5 Diamond Chains

Diamond Chain Technology Diamond chains are not all created equal, so insist on Diamond Chains from ICS®, the people who invented the technology. As the inventors of Diamond Chain Technology™, ICS is committed to continually improving the quality and versatility as well as the perfect blend of power, precision and efficiency: chains specifically designed for different power cutter types as well as the many different materials you encounter on the job. Choosing the right chain for your needs is essential to getting the best value for your purchase.

PowerGrit® PowerGrit® Utilized by public and private Pipe Cutting Chain water and wastewater departments worldwide, this The ICS Utility chain power patented platform exclusively cutter addresses operator safety from ICS is designed to cut a with its revolutionary grinding variety of materials from ductile technology which eliminates iron to plastic pipe. rotational kickback and Featuring a brazed layer diamond improves operator positioning coating on our FORCE4 platform, when cutting pipe with far this chain makes your job safer, less excavation. faster and easier.

Conventional method

PowerGrit method

6 icsdiamondtools.com | +32 10 310 251 icsdiamondtools.com | +32 10 301 251 7 Hydraulic Hoses ICS® 2-Stroke Oil Quick disconnect, 7,5m long, 20,68 bar Intensive laboratory and field testing have resulted in an oil formula that is cleaner burning, provides better thermal protection and an improved film barrier reducing piston ring wear. Protect your investment with work-proven ICS® 2-stroke Engine Oil.

50:1 Mix

PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION 70466 7,5 m hoses 571229 ICS 2 -Stroke Oil, 2%, 100 ml, 6-pack 571230 ICS 2 -Stroke Oil, 2%, 100 ml, 24-pack

Portable Hydraulic Powerpack Portable Water Supply ICS® petrol powered powerpacks are a dependable, When water isn’t readily available, this corrosion self-contained source of hydraulic power that offer resistant water supply system, with poly tank provides superior cooling capacity. The the solution. This system offers the functional, ergonomic design pressure and flow that ICS power makes them easily transportable cutters require. The High-Flow pump to any job site. provides 1.8 gpm at 60 psi and comes with alligator clips for 12v P95 13.5 kW Powerpack battery hookup. Comes with a whip Adjustable for 20 lpm or 30 lpm operation. fitted with a standard hose end, ready for any regular hose.

PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION 551529EU Portable Water Supply 599653 P95 13.5 kW Powerpack

Flow Adapter Valve 890F4/701-A Pipe Enjoy the convenience and efficiency In addition to the time saving value of PowerGrit® of powering your ICS® hydraulic power technology, the pipe clamp accessory developed cutter from skid steers, backhoes, and for the underground pipe application brings a whole other common construction new level of safety, accuracy and ease of use to the equipment. Available for both 30 lpm job. With a simple adaptor, you can mount to this and 45 lpm power cutters. clamp and dramatically reduce the effort of handling the power cutter, while providing a solid, stable cutting platform that also improves operator safety and the precision of the cut. Fits pipes up to 30 cm (outside diameter).

PART NUMBER DESCRIPTION PART NUMBER DESCRIPTION 70350 30 lpm Flow adapter valve 537640 Pipe Clamp 71287 45 lpm Flow adapter valve 537634 Axle replacement

FOR 890F4/701-A ONLY

6 icsdiamondtools.com | +32 10 310 251 icsdiamondtools.com | +32 10 301 251 7 ICS, Blount Europe SA Rue Emile Francqui 5 1435 Mont-Saint-Guibert, Belgium +32 10 301 251

icsdiamondtools.com

ADICS-100-10