DOCSLIB.ORG

Wpdocs\Shopnotes Index

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Wpdocs\Shopnotes Index ShopNotes Index Vol 1 to 81 3 Easy Ways Rabbet Cut 79-44 Bent Lamination 34-20 Case ,Drill Bit 10-10 3-in-1 Cut Off Sled 74-18 Best place for your Table Saw 79-42 Cast Iron 69-32 Abrasive pads 8-30 Better Results with Backrouting 82-8 Casters, Going Mobile 81-10 Add-On Tenoning Jig 74-24 Bevel Grinding Jig 3-6 Cauls, Putting on the Squeeze 81-50 Adjustable Dado Jig 20-4 Bin, Cut-Off 71-29 Changing Joiner Knives 12-14 Adjustable Hand Plane 61-26 Bins, Modular Storage 48-16 Cherry Saw Handle 52-24 Adjustable Miter Jig 52-6 Bird’s-Eye Maple 41-30 Chip Carving 52-28 Adjustable Outfeed Roller 81-6 Bits, Anti-Kickback 14-6 Chisel 44-10 Adjustable Planner Jig 38-6 Bits, Quick Change 20-20 Chisel Case 37-6 Adjustable Saw horse 17-4 Bits, Router, Multi-Profile 80-8 Chisel Plane 14-8 Adjustable Set-Up Gauge 5-24 Black Plane, Tuning Up a 36-8 Chisel Rack 63-6 Adjustable Shop Stool 46-6 Blades, Combination 25-22 Chisel, Sharpening a 26-8 Adjustable Spindle Sander 81-32 Block Plane Tips 7-8 Chisel Techniques 15-24 Adjustable Stop Block 6-8 Block Planes 32-12 Chisels, Finding the Right Angle for Your82-50 Adjustable Taper Jig 33-6 Board Footage 7-30 Chisels, Japanese 69-12 Adjustable V-Block System 65-6 Bookcase, Dovetailed 18-26 Choosing the Right Table Saw 63-32 Adjustable-Height Assembly Table 60-14 Bowl Gouge Basics 53-10 Circle Cutter, Getting Great Results 81-30 Air Compressor, Buying a Portable 60-10 Bowl, Turning a 53-12 Circular Saw Cut Off Jig 16-4 Air Compressor Caddy 60-6 Box Joint Jig 8-6 Circular Saw Miter Station 56-16 Air Hose Reels 84-46 Box Joint Jig 62-6 Circular Saw, Quick, Jigs 54-22 All About Bench Vises 84-38 Box Joint Jig 79-16 Circular Saws 19-8 Alternate Hardwoods 26-26 Box Joints, Making 8-12, 62-10, 75-12 Clamp Cart, Roll-Around Aluminum, Polishing & Protecting 82-36 Box Joints: Router Table 22-12 Clamp, Edge 42-6 Angled Dadoes 25-12 Box Joints, Super-Strong 71-12 Clamp Storage System 19-24 Angles Clamping Block 79-17 Brad Nailers 61-14 Clamp Storage System 73-28 Aniline Dyes 17-30 Brad Point Bits, Sharpening 8-14 Clamping, Angle, Block 79-17 Anti-Kickback Bits 14-6 Brass Body Hand Plane 79-32 Clamping, Picture frame Jig 36-5 Arched-top Clock 24-10 Brass, Working with 79-32 Clamping Station 62-24 Arm-R-Seal Finishes 78-34 Breath Right Safe Finishing 81-42 Clamping Station 3-22 Assembly Table 30-4 Bridge City Tools Universal Square 64-34 Clamps, Buying 82-42 Assembly Tips 51-10 Bridle Joinery, No Fuss 84-44 Clamps, Parallel Jaw 73-32 Auxiliary Fence 60-26 Brushing Basics 47-26 Clamps, Putting on the Squeeze 81-50 Auxiliary Fences, Slip-on 3-4 Building a Custom-Fitting Case 57-24 Clamps, Quick 27-26 Avoiding Dadoes Tearout 80-44 Building Raise Panels Doors 35-12 Clamps, Shop Built 6-12 Avoiding Kickback 21-4 Built-up Moldings 19-12 Clamps, Toggle 3-28 Backrouting, Better Results with 82-8 Bullnose Shoulder Plane 66-32 Classic Cabinet-Base Workbench 84-16 Baltic Birch Plywood 73-34 Buying a Portable Air Compressor 60-10 Clipboard Box 32-4 Band Clamp 17-26 Buying Clamps 82-42 Collets, get a grip on 81-8 Band Saw Circle Jig 15-4 Buying Lumber 23-30 Coloring Finishes 39-31 Band Saw, Cutting Tenons on a 20-10 Buying Pine 43-12 Combination Blades 25-22 Band Saw Fence System 8-16 Cabinet Clamping Tips 64-30 Combination Layout Tool 17-12 Band Saw, Pattern Cutting on a 24-8 Cabinet, Cordless Tool Storage 58-6 Combination Screws 4-30 Band Saw, Re-sawing on the 18-12, 51-24 Cabinet, Drill Bit 16-12 Combustibles 2-10 Band Saw Setup 13-10 Cabinet, Drill Press Accessory 84-34 Compound Miter Saws 31-24 Band Saw Table & Fence 76-16 Cabinet, Hardware Storage 64-22, 74-12 Containing Noise in the Shop 17-22 Band Saw Tune-Up 76-12 Cabinet, Lathe Tool 73-6 Convertible Shop Storage Cabinets 66-10 Band Saw Upgrade 51-16 Cabinet Levelers, Shop 84-10 Coping with Shop Disasters 74-32 Band Saws 24-22 Cabinet, Parts Bin 57-6 Cord Reels 82-46 Batteries, Cordless Tool 56-14 Cabinet, Rolling Tool 29-16 Cordless Drivers/Drills 26-20 Belt Sander, Drill Press 72-6 Cabinet, Router Bit Storage 13-4 Cordless Tool Batteries 56-14 Belt Sander Maintenance 15-8 Cabinet, Sliding Door Shop 77-6 Cordless Tool Storage Cabinet 58-6 Belt Sanders 29-8 Cabinet, Sliding-Door Wall 59-22 Country Shop 58-12 Bench Plane, Restoring a 47-10 Cabinet, Table Saw 1-14, 25-16, 50-16 Craftsman Tool Chest 29-23 Bench Plane, Tuning Up a 47-14 Cabinet, Wall-Mounted Tool 22-16 Cross Cutting 1-12 Benchtop Drill Presses 44-22 Cabinetmaker’s Tool Chest 49-16 Crosscut Sled 63-16 Benchtop Jointer Stand 48-26 Cabinets, Finish Storage 26-16 Crosscut Tips 63-21 Benchtop Mini Lathe 73-16 Cabinets, Modular Shop 59-6 Crotchwood 28-30 Benchtop Router Tables 45-16 Cabinets, Roll-Around Tool 84-48 Custom Fit Dadoes 45-10 Benchtop Tool Organizer 68-6 Caddies, Power Cord 54-26 Cut-off Sled Hold down 79-6 Benchtop Tool Stand 26-24 Caddy, Drill Press 2-4 Cut-Off Bin 71-29 Bending Press 69-26 Carpenter’s Toolbox 62-14 Cutoff Table, Sliding 27-16 ShopNotes Index Vol 1 to 81 Cutting Guide 19-16 Drill Press Table 57-10 Finishes, Spraying a Flawless 30-31, 55-12 Cutting Perfect Half Laps 59-30 Drill Press Table & Fence 38-22 Finishes, Surface Preparation 20-30 Cutting Plywood 42-10 Drill Press Table & Fence 18-16 Finishes, Varnish 23-24 Cutting Prefect Tapers 82-44 Drill Press Table Counterweight 11-4 Finishes, Water Based 57-28 Cutting Rabbets 20-16 Drill Press, Tilting, Table 6-4 Finishes, Water-Based Top Coast 21-31 Cutting Tapers on a Joiner 17-8 Drill Press Tips 14-24 Finishing on a Lathe 38-28 Cutting Tenons on a Band Saw 20-10 Drill Presses, Benchtop 44-22 Fishing Net 34-24 Cutting Threads in Wood 46-12 Drilling Guide 28-16 Flexible Veneer 16-8 Cutting Wood Plugs 37-30 Drilling Holes for Screws 27-22 Flush Trim Jig 34-16 Cyclone 13-15 Drilling Large Holes 56-22 Fold Down Drafting Table 41-16 Dado Blade, Freud Dail-A-Width 75-34 Drop-Down Tool Tray 30-24 Fold Down Work Center 14-16 Dado Blade Storage Case 79-30 Drop-In Draw Organizers 56-26 Fold-Away Tool Stand 77-18 Dado Blades 12-10 Drum Sander, Oscillating 32-16 Fold-Away Tool Stand, Optional Drafting Dado, Router, Jig 76-6 Drum Sander, Shop Made 4-11 Board 77-18 Dadoes, Angled 25-12 Dual Tool Station 75-24 Fold-Down Workstation 72-22 Dadoes, Custom Fit 45-10 Dust Collection System 13-14 Fold-Out Magazine Rack 51-28 Dadoes Tearout, Avoiding 80-44 Dust Collector Upgrade 55-16 Fold-up Outfeed Table 50-26 Dados Blade Storage Case 47-6 Easy to use Toggle Clamps 84-12 Folding Table 33-10 Dados Blades, Tips on Using 12-12 Edge banding Plywood 9-12 Forstner Bits 6-10 Dail Indicator 68-32 Edge Clamp 42-6 Frame & Panel Jig 35-28 Danish Oil 19-31 Edge Sander 37-16 Framing Square, New Angle on 78-10 Dealing with Lumber Storage 80-42 Edge Sanding Jig 53-6 Freud Dail-A-Width Dado Blade 75-34 Desktop Picture Frame 36-22 Edge-Sanding Block 65-30 Full Extension Drawer Slides 10-30 Disk Sander 12-16 Edging, Solid Wood 22-26 Full Mortise Lock 49-14 Disk Sander Stand 12-25 Edging with T-molding 79-28 Garage Lifts 82-48 Douglas Fir, Vertical Grain 84-50 Electrolysis, Removing Rust with 72-14 Gauge, Sliding Bevel 8-22 Doveltailed Toolbox 43-6 Elu Plunge Router 1-10 Gauge, Telescoping Drawer 81-6 Dovertail Jig, Leigh 79-12 End Drill Dowels 80-50 Gauges, Precision Marking 82-32 Dovetail Jig 43-16 Epoxy System 15-14 Gear Box, Shop Built 70-16 Dovetail Jigs 45-30 Epoxy, Working With 80-10 Gel Stains 14-30 Dovetail Keys 37-12 European Face Frame Hinge, Adjusting81-14 Get a Flat Panel with Splines 84-8 Dovetailed Bookcase 18-26 Extendable Drill Press Table 74-26 Get a grip on Collets 81-8 Dovetails, Hand-Cut 18-22 Fastener for MDF Projects 64-32 Get More Out of Your Grinder 76-22 Dowel Joiner 23-22 Fasteners, Favorite 79-10 Get More Out of Your Grinder 76-22 Dowel Locating Jig 80-14 Favorite Fasteners 79-10 Get the most from a Multi-Profile Bits 80-8 Dowel Pin Cutting Jig 81-5 Featherboard 21-6 Getting Connected Shop Air 81-38 Dowel Storage Rack 44-6 Featherboard Extension 79-4 Glue-Ups Tips 21-20 Dowelmax review 80-12 Fein Shop Vacuum 74-34 Glues Go Bad, When Good 71-34 Dowels, End Drill 80-50 Fence Accessories 1-26 Gluing Up Panels 28-12 Dowels, Routing Tenons on 28-11 Fence, Auxiliary 60-26 Gouge, Bowl, Basics 53-10 Drafting Board, Fold-Away Tool Stand, Fence, Band Saw System 8-16 Gouge, Spindle, Turning with a 23-6 Optional 77-18 Fence, Band Saw Table 76-16 Great Glue-Ups 62-20 Drafting Table, Fold Down 41-16 Fence, Drill Press Table & 18-16 Grinder, Get the Most from Your 82-26 Drafting Tools 41-12 Fence, Drill Press Table & 38-22 Get the Most from Your Grinder 82-26 Draw Organizers, Drop-In 56-26 Fence, Miter Gauge Fence 14-4, 53-16 Grinding, Bevel, Jig 3-6 Drawer Dividers, Shop Built 64-29 Fence, Miter Saw table & 67-6 Grinding, Low Speed Jig 31-16 Drawer Gauge, Telescoping 81-6 Fence, Radial Arm Saw 2-7 Grinding Prefect Bevels, Shop Made Drawer Joint Jig 18-4 Fence, Router Table & Accessories 69-16 Accessories for 76-30 Drill Bit Cabinet 16-12 Files & Rasps 40-12 Grinding Station 44-16 Drill Bit Case 10-10 Filter Box 13-22 Grinding Wheels, Selecting 44-14 Drill Bit Storage 53-24 Finding the Right Angle for Your Chisels82-50 Half Laps on a Table Saw, Perfect 81-26 Drill Press Accessory Cabinet 84-34 Finish, Rubbing out a 25-30 Hammers, Five Must Have 50-12 Drill Press Belt Sander 72-6 Finish Storage Cabinets 26-16 Hand Plane 11-10 Drill Press Caddy 2-4 Finishes, Brushing Basics 47-26 Hand Plane, Brass Body 79-32 Drill Press, Extendable Table 74-26 Finishes, Coloring 39-31 Hand Planer Jointer 19-4 Drill Press Foot Pedal 12-8 Finishes, Danish Oil 19-31 Hand
Load more

Recommended publications
  • Pipe & Cable Supports
    S&T156 PIPE &CABLE SUPPORTS PRODUCT CATALOGUE PRODUCT FEB 2015 PRODUCT CATALOGUE PIPE & CABLE SUPPORTS PIPE, FITTINGS & VALVES INTRODUCTION Steel & Tube is pleased to provide this Pipe & Cable Supports Product Catalogue for your use. We aim to carry all popular products and sizes on a continuous basis. The Pipe & Cable Supports Product Catalogue generally lists those sizes we carry ex-stock. However, there are some sizes (noted with a ) we offer on an indent basis only. We also carry many products not featured in this particular publication. Please contact Steel & Tube for more information on our comprehensive range of steel products, or visit our website: www.steelandtube.co.nz Steel & Tube offer a comprehensive package of product types designed for the support of Piping, Mechanical and Electrical installations. Our world leading brands work together as a total package to offer a complete solution in the support and installation for your application. The range includes: Sikla Pipe Support Systems Zip-Clip Wire Suspension EzyStrut Electrical Containment AGI Seismic Luminaire Fixtures MARKET SECTORS Major end-use markets include: • Mechanical & Building Services • Plumbing • Electrical Installation • Engineering • Fire Protection • Construction • Lighting • Irrigation • Refrigeration • Petrochemical TELARC LIMITED/ISO 9001 Steel & Tube is committed to providing our customers with consistent and reliable service that meets their needs and promotes excellence in systems and a continuous improvement in quality. To demonstrate this commitment Steel & Tube is a Telarc registered supplier, certified to ISO 9001. Telarc Limited (www.telarc.co.nz) is a national technical authority responsible for quality system certification through independent assessment, audit and testing of quality control procedures.
    [Show full text]
  • Welding Make-Up Tools
    * * WeldingWelding Make-upMake-up ToolsTools PB Catalog 8171 * At Sumner Manufacturing, our welding customers are very important people. One of our primary goals as a manufacturer is to provide our customers with high quality, competitively priced tools. But welders are not only our customers — we learn from the welder in the field what products are needed to make their jobs easier. These ideas help us to design and build new and better products. In essence, our customers are part of our Research & Development department, and without your input, we would be unable to continually offer great new products. Another important part of our philosophy at Sumner is our commitment to safety. All Sumner employees are dedicated to the safety of the individuals who use our products. We understand that price is always a concern to our users, but we will never sacrifice quality or safety just to save costs. eW know the demands expected of all Sumner products, and each is built for years of use. It could be said that Sumner tools are built the way the welder would make them. As a result, our tools are not only considered the best in the market, but also the most reliable to get the job done efficiently and safely. Visit us at sumner.com to see what's exciting and new. For the European market, please contact Sumner Netherlands [email protected] / tel. +31 (0)85 489 0284 * Sumner Manufacturing Co., LLC sumner.com Einführung 2 3 * Table of Contents Pipe Stands Fit-up Tools continued Adjust-A-Roll 8 Purge Star 34 Beam-Jax 16 Qwik Pins 26 Big V 11
    [Show full text]
  • Welding Make-Up Tools
    Welding Make-up Tools Catalog 315 At Sumner, our welding customers are very important people. One of our primary goals as a manufacturer is to provide our customers with high quality, competitively priced tools. But welders are not only customers—we learn from the welder in the field what products are needed to make their jobs easier. These ideas help us to design and build new and better products. In essence, our customers are part of our Research and Development department and without your input, Sumner would be unable to continually offer great new products. Another important part of our philosophy at Sumner is our commitment to safety. All Sumner employees are dedicated to the safety of the individuals who use our products. We understand that price is always a concern to our users, but we will never sacrifice quality or safety just to save costs. We know the demands expected of all Sumner products, and each is built for years of use. It could be said that Sumner tools are built the way the welder would make them. As a result, Sumner tools are not only considered the best at the market, but the most reliable tool to get the job done efficiently and safely. Thank you for buying Sumner products! 2 THANK YOU www.sumner.com CONTENTS Product Page Product Page Stands Fit-Up Tools continued Adjust-A-Roll............................................8-9 Mul-T-Square ............................................29 Beam Jax..................................................11 Nylon Expansion Plugs........................32-33 Big V ....................................................13-14
    [Show full text]
  • ICS Powergrit Catalog
    Product Catalog icsdiamondtools.com Petrol Power 695XL TECHNICAL SPECIFICATIONS 25cm, 40cm PowerGrit Bar Cutting Depth 30cm, 35cm, 40cm FORCE4 Powerhead Weight 9.6 kg Engine Speed 9300 +/- 150 rpm (max) Idling Speed 2700 +/- 100 rpm Horsepower 4.8 kW)@ 9000 rpm Engine Type 2-stroke, single cylinder, air cooled Displacement 94 cc Powerhead 46 cm x 36 cm x 30 cm Dimensions Guaranteed Sound 115 dB(A); (Kwa = 1.0 dB(A)) Power Level, Lwa (1) Sound Pressure Level, at 104.6 dB(A): (K = 1.0 dB(A)) Operator’s Ear Lwa (1) Vibration, a hv, eq 3.6 m/s2 (K=0.2 m/s2) Front Handle Concrete Cutting (2) 3.1 m/s2 (K=0.2 m/s2) Rear Handle Vibration, a hv, eq 5.62 m/s2 (K=0.2 m/s2) Front Handle Pipe Cutting (2) 5.28 m/s2 (K=0.2 m/s2) Rear Handle Water Supply Minimum of 1.4 bar 2010 Requirement 695 PG - Petrol Water Flow Minimum: 8 lpm Requirement Ductile Iron Pipe cut Portland, OR Fuel Mix Ratio 2% (50:1) fuel-to-oil Fuel Capacity 1.0 liter (1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432:2012 695XL-PG uilt to provide the best combination of performance and portablility for cutting in-ground utility pipe, the 695XL-PG Petrol Power Cutter with PowerGrit® chain will Bchange the way you cut pipe. The 695XL-PG offers unmatch power to weight ratio, allowing you to cut up to 40 cm deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining.
    [Show full text]
  • Milwaukee Tools 06-07 Catalog
    HEAVY-DUTY HOLE-HAWG® DRILL FUNCTIONAL DESIGN: PUTS FORCE IN LINE WITH CHUCK • Power And Torque, Reversing, Compact Design For Drilling Between Studs And Joists • 2-Position Pipe Handle 1675-6 • 3-Position Spade Handle • 2-Speed Gear Shift -~~~ a~ (Models 1675-6 and 1676-6) • External Brush Caps 1676-6 • Heat Treated Cut Steel Gears ((lc:J a~ • All Ball And Roller Bearings • Weighs Only 11-1/2 lbs EXCLUSIVE 1675-6 AND 1676-6 FEATURE -~ • Can Power Up To 4-5/8 .. Selfeed Bit In Low Speed And Drill Up To 1-3/811 Selfeed Bit In High Speed 1670-1 ACCESSORIES • CAN POWER UP IMPACT RESISTANT CARRYING CASE 11 TO 2-9/16 48-55-0111 For use with 1670-1 and 1675-6 SELFEED BIT (When ordered separately) TYPE "E" GREASE -~~~ a~ 49-()8-4122 11b. can QUICK CHANGE CHUCK Converts your 3 jaw chuck into a quick change chuck. Allows rapid , keyless insertion and removal of 7/ 16" hex drive accessories. 7/16" Quick drive shank SPECIFICATIONS 48-03-0006 1/2" CAPACITY REPLACEMENT REPLACEMENT CATALOG IN STEEL VOLTS NO LOAD SPINDLE CHUCK CATALOG NO. CHUCK KEY LENGTH NETWGT. SHIP. WGT. NUMBER (INCHES) AC ONLY AMPS RPM GEAR TRAIN DIAMETER* (CHUCK KEY INCLUDED) CATALOG NO. (INCHES) LBS. LBS. 1675-6 1/2 120 7.5 300/1200 TRIPLE 5/8" ROUND 48-66-1481 48-66-3280 6-1/2 11 .5 15.0 1676-6 1/2 120 7.5 300/1200 TRIPLE 5/8" ROUND 48-66-1481 48-66-3280 6-1 /2 11.5 21 .0 1670-1 1/2 120 7.5 900 TRIPLE 5/8" ROUND 48-66-1481 48-66-3280 6-1/2 11.5 14.0 STANDARD EQUIPMENT FOR 1676-6- Chuck 48-66-1481 , Chuck Key 48-66-3280, Flexible key Holder 48-66-4040 and Impact Resistant Carrying Case 48-55-0111 .
    [Show full text]
  • A38 Pipe Straps, Pipe and Conduit Clamps and Hangers
    A38 SUPERSTRUT METAL FRAMING — Pipe straps, pipe and conduit clamps and hangers Design loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger design Pipe hangers are of advanced design to be user friendly. Finishes and special materials The standard finish is electrogalvanized (EGC) or GoldGalv®. Some products are offered in aluminum and stainless steel where noted. O.D. of pipe Rigid EMT conduit conduit Wt./C Std. Cat. no. (in.) (mm) (in.) (in.) lb Pack 701–045PG 0.36–0.45 9–11.5 – – 9 10 701–055PG 0.46–0.55 11.5–14 – – 10 10 701–065PG 0.56–0.65 14 –17 – – 11 10 1 701–075PG 0.66–0.75 17–19.5 – ⁄2 13 10 1 701–088PG 0.76–0.88 19.5–22.5 ⁄2 – 15 10 3 701–100PG 0.89–1.00 22.5–25.4 – ⁄4 16 10 3 701–113PG 1.01–1.13 25.5–29 ⁄4 – 17 10 701–126PG 1.14–1.26 29–32 – 1 18 10 701–140PG 1.27–1.40 32–36 1 – 18 10 1 701 O.D. Pipe and conduit clamp 701–153PG 1.41–1.53 36–39 – 1 ⁄4 19 10 Machine screw and nut included. 1 701–167PG 1.54–1.67 39–42.5 1 ⁄4 – 20 10 1 701–180PG 1.68–1.80 42.5–46 – 1 ⁄2 23 10 Standard finishes and materials 1 701–193PG 1.81–1.93 46–49 1 ⁄2 – 26 10 PG Pregalvanized (i.e.
    [Show full text]
  • Portable Hacksaws for Tough Duty
    Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic • Electric • Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of pipe, structural steel, tanks and other materials. Our saws are designed for the toughest service in refineries, power plants, utilities, offshore oil, construction and demolition applications and are ideal for shutdowns and turnarounds in process piping industries. CS Unitec's pneumatic saws are safer than cutting with a welding torch in hazardous areas or confined spaces. • Compact size, ideal for cutting in confined spaces HACKSAWS • 2 3/8" blade stroke • Pipe clamps for 90˚ cutting of up to 30" OD pipe • Profile clamps for structural steel • Wide variety of blades and accessories for cutting steel, stainless steel, aluminum, plastic and wood HACKSAWS • Optional blade guide to ensure right-angle cuts • Automatically cut pipe with our optional self-feeding, pneumatic-powered pipe clamp system Assorted pipe clamps for pipes up to 30" OD or profile clamps for structural steel Twist or lever throttle (see pages 17-18) Manual or Pneumatic, electric automatic feed or hydraulic motor Pneumatic: Heavy-duty saw 3/4" NPT Connection blades from 8" Electric: to 37" long 110 Volt (220V available) Hydraulic: 1/2" FF (HTMA) Couplings HSS, HSS-SL, Optional saw blade guide and carbide- for added blade stability – coated ensures straight cutting! blades Two sizes available available (Not required – see page 18) (see page 19) 14 • 1-800-700-5919 • Visit
    [Show full text]
  • What Is Powergrittm and How Does It Work?
    Questions and Answers What is PowerGritTM and how does it work? PowerGrit is a patent-pending, diamond-coated Utility Saw Chain designed to grind through ductile iron, cast iron, PVC, HDPE and other types of pipe as well as a broad range of other hard materials. What are the benefits of using PowerGrit? PowerGrit chain is faster, easier and safer than other methods. - Reduced excavation time to access pipe - Reduced labor required to dig under pipe - Single position cutting access up to 12” (30 cm) diameter pipe, no need to access bottom of pipe - Easier saw control, reduced operator effort during cutting - Improved operator safety due to access, control and reduced rotational forces - Reduced potential for blade breakage How fast will a PowerGrit utility saw chain cut? Depending on the saw and other factors, including pipe wall thickness, hardness, operator experience and others, a PowerGrit chain can cut through a 10” (25 cm) ductile iron pipe in as little as 3-5 minutes. How long will a PowerGrit utility saw chain last? PowerGrit chains can last as long as 30 cuts through 10” (25 cm) ductile iron pipe. Note: The number of cuts will vary depending on many factors, including pipe diameter, pipe wall thickness and/or hardness, position of the pipe in the trench, factors related to the saw, operator experience and others. Cutting into materials surrounding the pipe can reduce chain life as can inadequate water supply to the saw. How long does a guidebar last? A guidebar used with PowerGrit Utility Saw Chain should last through one to three chains depending on several factors including material being cut, operator experience, cutting into surrounding material, water pressure and others.
    [Show full text]
  • Pipe Clamps and Accessories
    Pipe Clamps and Accessories 5Pipe Clamps and Accessories Stabil D Stabil D-3G Stabil D-M16 Page 5-4 Page 5-6 Page 5-8 Stabil D-3G with Lining Stabil D-3G w/ Silicone Stabil D-M16 with Lining Lining Page 5-9 Page 5-11 Page 5-13 Stabil D-M16 w/ Silicone Countersink Screw SCR Triple Thread Connecting Lining Nut NT 3G Page 5-14 Page 5-15 Page 5-16 Ratio S Ratio S-K for Plastic Pipes Ratio LS Page 5-17 Page 5-18 Page 5-20 05/2010 Siconnect 5-1 Pipe Clamps and Accessories Ratio LS Silicone Duo Clamp SRS Duo Clamp SRS with Lining Page 5-21 Page 5-22 Page 5-23 Ratio S M8 Pipe Clamp RS 3567 A Stabil Type C Page 5-24 Page 5-25 Page 5-27 Ring Bolt SCR Refrigeration Clamp SKS Refrigeration Clamp LKS Top-2C Page 5-28 Page 5-29 Page 5-31 Refrigeration Clamp CMP Load Plate Pipe Loop RSL N Page 5-33 Page 5-35 Page 5-36 Siconnect 5-2 05/2010 Pipe Clamps and Accessories Pipe Loop RSL Praktica S Pipe Loop RSL Praktica S w/ Kombi S Silicone Lining Page 5-37 Page 5-38 Page 5-39 U Bolt RUB U Clamp RUC Adapter AD f/f Page 5-40 Page 5-41 Page 5-42 Height Adjuster HRS 0 Height Adjuster HRS 1 Height Adjuster HRS P Page 5-43 Page 5-44 Page 5-45 05/2010 Siconnect 5-3 Pipe Clamps and Accessories Stabil D Group: 1239 Application For the installation of pipes required for all M&E services in industrial, residential and public buildings.
    [Show full text]
  • Section U - Hand Tools & Jigs
    Section U - Hand Tools & Jigs SECTION U - TABLE OF CONTENTS A Section U Contents: B Hammers/Nailsets...................................... 2 C Install and Cutting Tools.............................. 3 Utility Knives and Blades....................... 4 - 5 ↑ Utility Knives & Blades D Files → Razor Blades and Putty Knives................... 6 pages U-4 - U-5 pages Files and Accessories............................ 7 - 9 U-7 - U-9 EE Tape Measures..................................10 - 11 FF Marking and Measuring Tools.........11 - 13 Pressure Rollers → page U-32 Kreg Jigs and Accessories.................14 - 17 G Deco Hardware and Lighting Jigs.....18 - 19 3rd Hand Supports................................... 20 H Clamps...............................................21 - 27 Pinch Dogs and Toggle Clamps...............28 I Laminate and Edgebanding Tools....29 - 31 Pressure Rollers..........................................32 J Laminate & Edgebanding Tools → KK pages U-29 - U-31 L MM ← Tape Measures page U-10 - U-11 NN OO PP QQ R ↑ 3rd Hand page U-20 S T ↓ Clamps pages U-21 - U-27 ↑ U V WW XX Y ↑ Jigs (Pockethole, Hardware & Lighting) pages U-14 - U-19 800-289-2237 • WWW.WURTHBAERSUPPLY.COM • WÜRTH BAER SUPPLY U - 1 Section U - Hand Tools & Jigs A HAMMERS/NAIL SETS B Rubber Mallet C • Tough rubber head molded to a lacquered wooden handle • Rubber head helps minimize marring and surface damage D Item # Length Weight E ST57-522 13-1/4” 18 oz. F G Dead Blow Hammer • Uni-Cast™ construction of nonferrous materials eliminate sparking and won’t H absorb liquids • Dead-blow function uses steel shot to eliminate bounce back I Item # Length Weight J ST57-531 11-1/4” 18 oz. K Curve Claw Hammer L • Forged high-carbon steel head, fully heat-treated and polished bell face M • Hickory handle N Item # Length Weight ST51-616 13-1/4” 16 oz.
    [Show full text]
  • Regular Public Meeting Minutes July 27, 2020 Page 1 of 107
    Regular Public Meeting Minutes July 27, 2020 Page 1 of 107 President Vice President Board Member Christina Schratz L. Daniel Rodriguez Maryann Capursi Board Member Board Member Board Member Horacio Ray Carrera Kenia Flores Craig B. Miller Board Member Board Member Board Member Judith Sanchez Arthur G. Soto Ronald Van Rensalier Regular Public Meeting Minutes July 27, 2020 Page 2 of 107 REGULAR PUBLIC MEETING - MONDAY, JULY 27, 2020 1. Call to Order.....................................................................................................................1 2. Invocation …………………………………………………………………………………………………….1 3. Pledge of Allegiance...........................................................................................................1 4. Roll Call ……………………………………………………………………………………………………….1 5. Public Participation …………………………………………………………………………………………1 6. Executive Session…………………………………………………………………………………………… 1 7. Report of the President…………………………………………………………………………………..... 1 8. Report of the Superintendent……………………………………………………………………………. 1 9. Committee Reports ………………………………………………………………………………………... 1 10. Agenda Items A. Approval of Minutes .................................................................................................. A-1 B. Personnel……………… ............................................................................................... B-1–B-34 C. Tuitions .................................................................................................................... C-1-C-6 D. Authorizations .........................................................................................................
    [Show full text]
  • CS Unitec Portable Magnetic Drill Accessories
    Accessories Cut holes in steel plate up to 3/8" thick Starter Kits CS Unitec starter kits offer the essentials you need to begin drilling. We have three options that provide a cost-effective tool set for your application. HSS Steel Cutter Starter Kit ZST 100S Kit Includes: Set of 5 annular cutters (one each of the following): 9/16" dia. x 1" depth (6-1-118) 11/16" dia. x 1" depth (6-1-122) 13/16" dia. x 1" depth (6-1-126) 15/16" dia. x 1" depth (6-1-130) (6-1-134) 1-1/16" dia. x 1" depth 2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100) STARTER KITS 1 quart high-performance cutting oil (ZHS 006) See pages 56-57 for more information on HSS annular cutters. Armor-PlatedArmor-Plated TiAlNTiAlN Carbide-CoatedCarbide-Coated CutterCutter StarterStarter KitKit Other annular cutter kits are ZST 100P Kit Includes: available – Set of 5 annular cutters (one each of the following): contact CS Unitec 9/16" dia. x 1" depth (8-1-118) 11/16" dia. x 1" depth (8-1-122) for details. 13/16" dia. x 1" depth (8-1-126) 15/16" dia. x 1" depth (8-1-130) 1-1/16" dia. x 1" depth (8-1-134) 2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100) 1 quart high-performance cutting oil (ZHS 006) See pages 58-59 for more information on Armor-Plated TiAlN Carbide-Coated annular cutters. HSS Steel Cutter Starter Kit with Power Cleaner ZST 200S Kit Includes: Set of 5 annular cutters (one each of the following): 9/16" dia.
    [Show full text]