Quick Start Set up Guide Technical Specification What Is Included in the Box Using the Remote Control Online Manual

Technical Specifi cation Product fi che

Trademark Sharp

Model ID 32BC2IE 40BG2IE 32BC2IO Quick Start Set Up Guide For information on using the TV’s features, please refer to the Operating Instructions. Energy effi ciency class A+ Visible screen size (diagonal) 81 cm / 32 inches 102 cm / 40 inches Model Numbers On-mode power consumption 31.0 W 45.0 W 32BC2IE Register your manufacturers guarantee Annual energy consumption *1 45 kWh 66 kWh Standby power consumption *2 <0.50 W 32BC2IO online within 14 days of purchase at www.registertoday.co.uk/sharp Off mode power consumption n/a 40BG2IE Screen resolution 1366 (H) x 768 (V) 1920 (H) x 1080 (V) and enter into a prize draw to *1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. Win a *2: When the TV is turned off with the remote control/standby button and no function is active. Soundbar 32BC2IE 32BC2IO 40BG2IE RF 75 ohm Antenna / Analog / DVB Quick & easy guide for setting up your TV Inputs 3 x HDMI, 2 x USB, 1 x SCART, What is included in the box 1 x RJ45 LAN/Ethernet, 1 x Composite/CVBS Video & Component/YPbPr Input, 1 x L/R Audio input for Composite/CVBS & Component/YPbPr Using the remote control Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone Setting up the TV for the fi rst time - including attaching the stand Speaker*/ Amplifi er Watts 2 x 10 / 2 x 8 Connecting other devices to the Television (RMS) Voltage and power AC 220V ~ 240V; 50Hz AC 220V ~ 240V; 50Hz consumption 31/45/70W (home mode/standard/max) 45/65/80W (home mode/standard/max) Need help setting up or using your TV? (<0.5W in Standby) (<0.5W in Standby)

Dimensions including stand 730W x 470H x 179D 914W x 575H x 199D (mm) Please contact the UK & ROI Helpline* Net weight (Kgs) 4.6 6.8 Telephone UK 0330 024 0803 or ROI 01443 3323 Wall Mounting VESA 200 x 100 (mm) VESA 200 x 200 (mm) Online support at: www.umc-uk.co.uk Email support at: [email protected]

*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter). *Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Calls to the ROI number are charged at the local call rate. Harman Kardon is trademark of HARMAN International The terms HDMI, HDMI High-Defi nition Multimedia Interface, The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm. Industries, Incorporated, registered in the United States and the HDMI Logo are trademarks or registered trademarks and/or other countries. of HDMI Licensing Administrator, Inc. Bank Holidays - 10am to 4pm Closed Christmas and New Years day

SHA/QSW/0146

need to program it with the code 4170. code the with it program to need

use your Sky Q remote to operate the TV’s basic functions, you will will you functions, basic TV’s the operate to remote Q Sky your use

and you will need to program it with the code 2134. If you wish to to wish you If 2134. code the with it program to need will you and

functions, you will need a Sky remote control (Revision 9 or later) later) or 9 (Revision control remote Sky a need will you functions,

your item in the event of warranty/service repair is in it’s original box/packaging. original it’s in is repair warranty/service of event the in item your If you wish to use your Sky remote to operate the TV’s basic basic TV’s the operate to remote Sky your use to wish you If

are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package package to way safest The correctly. it package to unable are you if warranty/service out carry to unable are

Sky Remote Code Remote Sky

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We We support. or repair warranty/service of event the in this need will you as box/packaging your save Please

- To repeat playback. repeat To - REPEAT

- Select different angle of DVD. of angle different Select - ANGLE/3D

- Press once to set point, press a second time to return to point. point. to return to time second a press point, set to once Press - A-B

example, 101 (BBC1 HD) 102 (BBC2 HD) etc. HD) (BBC2 102 HD) (BBC1 101 example,

c chapter. c speciﬁ a to go To - GOTO

Please note that any Freeview HD channels found during tuning will be placed in channel positions above 100. For For 100. above positions channel in placed be will tuning during found channels HD Freeview any that note Please

- To

p l ay / p a u s e at www.freeview.co.uk. at

You can check coverage for your postcode postcode your for coverage check can You

- To

p l ay

i n

f a s t fo

rward

m o d e

A-B 3

REPEA O T T O G

coverage area. coverage

- To

p l ay

i n

f a s t re

w i n d m o d

T LIS C C RE To receive Freeview channels, in particular Freeview HD channels, you will need a Digital TV aerial and be in a good Freeview Freeview good a in be and aerial TV Digital a need will you channels, HD Freeview particular in channels, Freeview receive To

(To

EJ E CT

t h e

d i s c

p re s s / h o l d PVR/MEDIA t h e

b u t to n

fo r

s e co n d s )

DVD SETUP DVD

- To -

s to p

t h e

p ay l b a c k / E j e ct

D i s c

NU E DVD M DVD - T - o a d va n ce

fo rw ard

to t h e

n ext

c h a p te r

- To

re s t a rt

t h e

c u rrent c h a

p te r

N E T+

the TV’s DVD setup menu (must be set to the DVD source). DVD the to set be (must menu setup DVD TV’s the

- Opens the list of previously recorded items/Access recorded previously of list the Opens - REC LIST/DVD SETUP SETUP LIST/DVD REC

SU BT XT I TL

TE E

TV 4 FO IN

will not be able to access content that requires the upgrade. the requires that content access to able be not will DVD menu of the DVD inserted (must be set to the DVD source). DVD the to set be (must inserted DVD the of menu DVD

Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you you upgrade, an decline you If content. their access to PlayReady upgrade to you require may owners Content

- Access the USB record function/Access the function/Access record USB the Access - RECORD/DVD MENU RECORD/DVD

ect unprotected content or content protected by other content access technologies. technologies. access content other by protected content or content unprotected ect aff not should Revocation

FA K V BAC - Access the Aquos NET+ Smart Portal. Smart NET+ Aquos the Access - NET+ NET+

content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. content. PlayReady-protected consume to ability device’s the revoke to Microsoft require may owners content

ix App. ix Netﬂ the Access - NETFLIX

and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, usage, content on restrictions enforce properly to fails device the If content. WMDRM-protected and/or

- Access the Youtube App. Youtube the Access - YOUTUBE

including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content content PlayReady-protected access to technology PlayReady uses device This content. copyrighted including

- To switch to Digital Channels. Digital to switch To - TV TV

OK Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, property, intellectual their protect to technology access content PlayReady™ Microsoft use owners Content

- To switch the dialogue at the bottom of the screen (on/off). screen the of bottom the at dialogue the switch To - SUBTITLE

- To enter/exit Text. enter/exit To - TEXT

of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. from license(s) appropriate the without prohibited is product this of outside technology this of

- Press twice for information about the current programme. current the about information for twice Press -

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution distribution or Use Microsoft. of rights property intellectual certain to subject technology contains product This

- Press once for now/next channel information. channel now/next for once Press - INFO INFO

MEN U

EXIT 4

Microsoft PlayReady™ Microsoft

- To display favourites menu. favourites display To - FAV

SOURCE

- To go back a previous step. previous a back go To - BACK

CH VOL

system settings to your preference. your to settings system

SOUND

- Allows you to navigate the on-screen menus and adjust the the adjust and menus on-screen the navigate to you Allows - ( / / / / OK) / / / / (

- To exit all menus. all exit To - EXIT

PICTURE

RF Cable Cable RF - To display OSD menu. OSD display To - MENU

- To increase or decrease the channel being watched. being channel the decrease or increase To - CH (+/-) CH

- To display the input/source menu. menu. input/source the display To - SOURCE cables either from your retailer or at www.umc-uk.co.uk/cables at or retailer your from either cables GUIDE 0

TV - Scrolls through sound mode options. mode sound through Scrolls - SOUND Should you wish to connect older/analogue devices to your television, you can purchase the necessary necessary the purchase can you television, your to devices older/analogue connect to wish you Should

- Scrolls through picture mode options. mode picture through Scrolls - PICTURE

Additional Accessories Additional

- To increase/decrease the sound level. sound the increase/decrease To - VOL (+/-) VOL 9 7

8 3

et Leaﬂ Safety x 1

1 x Remote Control & 2 x AAA Batteries AAA x 2 & Control Remote x 1

- To return to the previous channel viewed. channel previous the to return To -

4 6

- Opens the 7 day TV guide (digital TV mode). TV (digital guide TV day 7 the Opens - TV GUIDE GUIDE TV 1 x Stand installation pack installation Stand x 1 1 x Quick Start Guide Guide Start Quick x 1

- 0–9 to select a TV channel directly. directly. channel TV a select to 0–9 - NUMBER BUTTONS NUMBER

Included with this TV are the following accessories following the are TV this with Included 3 1 2

Accessories

- Mute the sound or vice versa. vice or sound the Mute - MUTE MUTE

- Switch on the TV when in standby or vice versa. vice or standby in when TV the on Switch - ON/OFF 1

What is included in the box the in included is What

NOFMUTE ON/OFF

For models with 3D functions. 3D with models For

For models with USB Playback. USB with models For

For models with PVR Function. PVR with models For

Online Manual Online

For models with integrated DVD players. DVD integrated with models For 1

To launch the Online Manual, press the [MENU] button and then select Settings>About TV>Help Information>View Information>View TV>Help Settings>About select then and button [MENU] the press Manual, Online the launch To Key

Online Manual Online Using the remote control remote the Using

SSHA-QSW-0146.inddHA-QSW-0146.indd 1 229/01/20209/01/2020 18:13:1218:13:12 Setting up the TV set for the fi rst time To obtain a copy of your Operating Instructions, please go to: www.umc-uk.co.uk/instruction-manuals/sharp 1 Fitting the stand 3 TV panel must be facing downwards. Back/Shortest 4 For the stand installation, there is one type of screw provided as shown R

below. 1 To complete the stand installation you 2 will require a cross head screw driver. 4 x Place the TV set on a ﬂ at and 2 Front/Longest 3 clean surface with the panel facing 1 L downwards to avoid damage. Place the TV set on a ﬂ at and clean surface When the stand feet are installed correctly the When the stand/feet are in the correct with the panel facing downwards to avoid stand feet will be longest at the front of the TV position, secure the feet to the underside of 4 x damage. and shortest at the back with the feet pointing the TV set using 4 screws provided. Used for attaching the stand away from each other. to the TV set (fi g.2)

2 Connecting your set 3 Powering On the TV Wall Mounting the TV

TV Control Stick Remote Control: Installing Batteries 1. Remove the four screws that are supplied in the wall mounting holes. 2. The wall mount can now be easily attached to the mounting holes on the rear of the TV. 3. Install the wall mounting bracket to the TV control stick television as advised by the bracket manufacturer. 1) Connect the TV to your power socket. 2) If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input Switch on the television by pressing Insert the batteries supplied into the remote The picture shows the use of spacers, which from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/ the TV control stick located on the control and press the standby button to power are not applicable to all sets/installations. TV set. on the TV. Image for illustration only. Saorview, skip this step.

4 First time installation Basic installation steps are shown below. These may vary slightly depending on model. Connectivity

M 1 2 3 Introduction Languages Country Selection When the set fi rst turns on, it enters the First Time Installation Select your preferred on-screen display language. This will change the language Select the correct fl ag for the country in which the set will be L mode. This can be restarted by restoring the set to default settings in which the menus and associated information is displayed in. When set up has used in. This will enable the set to correctly install the functions in the ‘About TV’ Menu. been completed, to change this press the [MENU] button and then select Settings > applicable in the country of use. K Note: In home mode, System Menu > Language the TV will switch off automatically after 4 hours in the event that J SCART no buttons are pressed on G the TV or remote control. 1 2 (You can change this C D by pressing the [MENU] DIGITAL I ETHERNET button and then selecting AUDIO OUT Settings>Time>Auto OPTICAL L R VIDEO/Y Pb Pr Standby) H 4 A 5 6 B E F Environment of Use Network setup Set Up Netfl ix Home Mode: For normal use, by default it is set to a power saving mode You can connect the TV to your broadband router or wireless network in order If you have a Netfl ix account, it can be set up on the television which reduces the energy used by up to 25% (by reducing the power to to take advantage of the Smart functions. If you connect the TV to your router here. Once set up and validated, the First Time Installation the LED/LCD panel). This can be changed in the picture mode settings. using an Ethernet cable (recommended) this step will be skipped. returns to the next step. A Ethernet/LAN* Network connection H SAT In Satellite Input

B Digital Audio Digital Optical Audio Output I RF in RF / TV aerial input

C HDMI 1 HDMI input J HDMI 3 HDMI input

D HDMI 2 HDMI input (ARC) K Earphones Earphone input Audio shared for Video/Composite E L/R HDMI input (ARC) Service Input Input is used only by service centres and component/ YPbPr L Video Input (green) and HD input F Video/YPbPr HD input (YPbPr) CI card in Common interface module (Ypbpr) M 7 8 9 G SCART SCART input N USB 2.0 USB port 2.0

Default Source Support Advice Tune in Channels Select the source which you use the most. If Digital TV (Freeview) is chosen, Information regarding support is displayed for a little while. * The Ethernet/LAN port is used for Freeview HD services and smart functions. Choose to install terrestrial channels now or later. then at the next step, the set will tune in and default to Digital TV (Freeview). Tuning continues and a progress bar is shown with the number of If one of the other sources is selected, then the set will not tune in at this channels found indicated below. stage and default to that input. If it is required to tune the set in later, press If you are picking up signals from more than one transmitter, you the [MENU] button and then select Settings>Channels will be requested to select your primary and secondary regions.

SSHA-QSW-0146.inddHA-QSW-0146.indd 2 229/01/20209/01/2020 18:13:1918:13:19