Bullard ESS Innerzone Goggles Features and Benefits

Total Page：16

File Type：pdf, Size：1020Kb

Bullard ESS Innerzone Goggles Features and Benefits

Bullard ESS Goggles Bullard offers Eye Safety Systems (ESS) goggles as an NFPA 1971-2013 compliant alternative to fire helmet faceshields. ESS goggles may be worn alone or in conjunction with a faceshield on all Bullard fire helmets. These high-performance goggles provide additional eye protection options that can address primary eye protection issues defined in NFPA 1500, OSHA Standards 29 CFR and ANSI/ISEA Z87.1 requirements. Goggles are designed to surround the eye and offer protection against wind, airborne debris and radiant heat. Features and Benefits Full perimeter filtered ventilation of the goggle frame allows humid air to escape. This combined with anti-fog lens coating makes the goggle resist fogging better than any other goggle. Vent filters help keep dust particles and liquids out. Ergonomic anatomical frame offers superior comfort and a snug, fully enclosed fit. The tough, impact-resistant frame also fits over most eyeglasses. Modularity provides for quick replacement of straps and distortion-free lenses in less than 30 seconds. The speed clip strap adjustment system allows for rapid donning and doffing. Lower cost for parts replacement over existing fire faceshields offers long-term cost saving solutions for maintenance and upkeep. Tightening Strap Speed Clip www.bullard.com Ordering Information CATALOG NUMBER DESCRIPTION IZ2 Innerzone 2B Structural fire helmet goggle with snap-on/snap-off mounting brackets for easy removal from the helmet. Nomex® goggle straps with speed clip adjustment, polycarbonate, surgical grade, replaceable, anti-scratch lens, full perimeter, ventilated high-impact frame. IZ3 Innerzone 3B Structural fire helmet goggle with a single, wraparound Nomex goggle strap with speed clip adjustment and hook and loop helmet tabs, polycarbonate, surgical grade, replaceable anti-scratch lens, full perimeter, ventilated high- impact frame. XTO ESS Wildfire® Helmet Goggle Wildland approved, closed cell foam padded goggle with a single, wraparound Nomex goggle strap with speed clip adjustment and Velcro® helmet tabs, polycarbonate, surgical grade, replaceable anti-scratch lens, full perimeter, ventilated high-impact frame. WFB ESS Wildfire® Helmet Goggle Economy grade, Wildland approved goggle, with a single, wraparound Nomex goggle strap with speed clip adjustment and Velcro helmet tabs, polycarbonate, surgical grade, replaceable anti-scratch lens, full perimeter, ventilated high-impact frame. ISO 9001 Americas: Europe: Asia-Pacific: certified Bullard Bullard GmbH Bullard Asia Pacific Pte. Ltd. ©2015 Bullard. All rights reserved, including the right of reproduction, 1898 Safety Way Lilienthalstrasse 12 LHK Building in whole or in part, in any form. Cynthiana, KY 41031-9303 • USA 53424 Remagen • Germany 701, Sims Drive, #04-03 Bullard is a registered trademark Toll-free within USA: 877-BULLARD Tel: +49-2642 999980 Singapore 387383 of Bullard. Nomex is a registered (285-5273) Fax: +49-2642 9999829 Tel: +65-6745-0556 trademark of E.I. DuPont de Nemours Tel: +1-859-234-6616 Fax: +65-6745-5176 & Company. Velcro is a registered trademark of Velcro USA. Fax: +1-859-234-8987 www.bullard.com 8034(0715).

Copy Link

Recommended publications

Snow Goggles and Limiting Sunlight
MESS E N G E R S NOW G O ggl ES Y R U A ND L IMITIN G S UN L I G HT C R E M TO N M I S S I O L E S S O N O V E RV I E W GRADE LEVEL L ESSON S UMMARY 5 - 8 Although different kinds of radiation are helpful to human activities, too much of it can be harmful. The purpose of this lesson is to illustrate the use DURATION of the scientific method to solve problems of too much radiation. By studying 1-2 hours ancient solutions to the issue of excessive sunlight on human vision, we can better understand the process of designing solutions to similar problems for spacecraft, such as the MESSENGER mission to Mercury. Students build ESSENTIAL QUESTION snow goggles similar to those used by the Inuit people. The goggles are How can the scientific method be used to solve designed to block unwanted light, while increasing the viewer’s ability to different kinds of prob- see in a bright region. Students also create their own version of the goggles lems? to improve upon existing designs. Students compare the process used to invent snow goggles with that employed by the MESSENGER mission Lesson 2 of designers. As a result, they discover that the basic principles of using the Grades 5-8 Component scientific method for solving problems are the same, regardless of whether of Staying Cool the exact solution to the problem is the same. O BJECTIVES Students will be able to: ▼ Construct snow goggles to examine an ancient solution to the problem of excess sunlight.
[Show full text]
The Future of Smart Glasses
The Future of Smart Glasses Forward-looking areas of research Prepared for Synoptik Foundation May 2014 Brian Due, PhD. Nextwork A/S Contents Smart&Glasses&and&Digitised&Vision&.....................................................................................................&3! 1.0&The&basis&of&the&project&...............................................................................................................................&4! 1.1!Contents!of!the!project!................................................................................................................................................!4! 2.0&The&historic&development&of&smart&glasses&..........................................................................................&5! 3.0&The&technological&conditions&and&functionalities,&and&various&products&..................................&8! 4.0&The&likely&scope&of&smart&glasses&within&the&next&3H5&years&...........................................................&9! 5.0&Likely&applications&of&smart&glasses&.....................................................................................................&12! 5.1!Specific!work6related!applications!......................................................................................................................!12! 5.2!Specific!task6related!applications!........................................................................................................................!12! 5.3!Self6tracking!applications!........................................................................................................................................!13!
[Show full text]
Tactical Eyewear Protection Equipment Assessment Report
Tactical Eyewear Protection Equipment Assessment Report May 2020 Approved for Public Release SAVER-T-R-21 The Tactical Eyewear Protection Equipment Assessment Report was funded under Financial Transaction FTLF- 19-00009 from the U.S. Department of Homeland Security, Science and Technology Directorate. The views and opinions of authors expressed herein do not necessarily reflect those of the U.S. Government. Reference herein to any specific commercial products, processes, or services by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government. The information and statements contained herein shall not be used for the purposes of advertising, nor to imply the endorsement or recommendation of the U.S. Government. With respect to documentation contained herein, neither the U.S. Government nor any of its employees make any warranty, express or implied, including but not limited to the warranties of merchantability and fitness for a particular purpose. Further, neither the U.S. Government nor any of its employees assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed; nor do they represent that its use would not infringe privately owned rights. The cover photo and images included herein were provided by the National Urban Security Technology Laboratory, unless otherwise noted. Approved for Public Release ii FOREWORD The U.S. Department of Homeland Security (DHS) established the System Assessment and Validation for Emergency Responders (SAVER) Program to assist emergency responders making procurement decisions. Located within the Science and Technology Directorate (S&T) of DHS, the SAVER Program conducts objective assessments and validations on commercially available equipment and systems and develops knowledge products that provide relevant equipment information to the emergency responder community.
[Show full text]
WP.005.2010-12-14 Choosing Welding Helmets and Goggles
Choosing Helmets and Goggles Arc-Zone.com® Technical-Focus Sheet WP.005.2010-12-14 December 14, 2010 Choosing Welding Helmets and Goggles Few decisions affect the safety and well‐being of welders as much as his or her choice of eye and face protection equip‐ ment. The CPSC (Consumer Product Safety Commission) esti‐ mates that approximately 10,000 eye injuries related to welding occurred each year, and making a wise choice of helmets or goggles can greatly reduce the chances of your becoming in‐ jured. Most importantly, always choose helmets and goggles complying with ANSI Z87.1. When choosing them, there are Inside three main considerations: • Fixed filtration versus variable electronic darkening • Choosing Welding Hel- • mets and Goggles Traditional flip up helmets versus autodarkening ones • Fixed Versus Variable • The filter shade rating number required by the job Filtration • Autodarkening Versus The filter lens should be marked with the manufacturer, the Traditional Flip-up Hel- shade number or number range, and Z87.1. For cutting or mets • Choosing Filter Shades working overhead, use a full‐face shield on top of safety • Cheater Lenses glasses. If using goggles, to prevent fogging, ensure that the • About Arc-Zone.com vents aren’t obstructed. Fixed Versus Variable Filtration This choice usually comes down to cost and reliability. Fixed shade helmets and goggles are less expensive, easier to main‐ tain, and more reliable. Variable shade helmets are electronic devices that provide much greater flexibility if welding condi‐ tions vary. The shade rating determines the welder’s ability to see what he or she is doing when welding.
[Show full text]
Smart Glasses Design Exploring User Perception of Wearable Computing
SMART GLASSES DESIGN EXPLORING USER PERCEPTION OF WEARABLE COMPUTING Master Thesis University of Lapland Faculty of Art and Design Department of Industrial Design Spring 2016 Vahab Pour Roudsari Farnaz 0371195 Abstract University of Lapland Faculty of Art and Design Title: Smart Glasses Design-Exploring user perception of wearable computing Author: Vahab Pour Roudsari Farnaz Degree Program: Industrial Design Type: Master Thesis Pages: 95 Year: 2016 As technology is growing rapidly and integrating itself to all aspects of people’s life, designers and developers try to provide a more pleasant experience of technology to people. One of the technology trends which aims to make life easier is wearable computing. Wearables aim to assist people to be in control of their life by augmenting the real life with extra information constantly and ubiquitously. One of the growing trends of wearable computing is Head Mounted Displays (HMD), as the head is a great gateway to receive audio, visual and haptic information. Also due to the Google Glass project, wearables in form of glasses gained much more attention during last years. However, because of the early stages of the technology adaptation, there is still much to explore on social acceptancy, key use cases and design directions of glasses as a type of wearable computing. This thesis has two stages. In the first stage, the aim is to explore the different use cases of a wearable eye tracker concept in different context and study the user’s perception of such a device. To accomplish this objective a user study with (n=12) participants were conducted using the experience sampling methods (ESM) and employing a mock-up of a smart-glasses as a design probe.
[Show full text]
Eyewear Frames and Eyewear
What Every Member of the Trade Community Should Know About: Eyewear Frames and Eyewear AN INFORMED COMPLIANCE PUBLICATION FEBRUARY 2012 Eyewear Frames and Eyewear February 2012 NOTICE: This publication is intended to provide guidance and information to the trade community. It reflects the position on or interpretation of the applicable laws or regulations by U.S. Customs and Border Protection (CBP) as of the date of publication, which is shown on the front cover. It does not in any way replace or supersede those laws or regulations. Only the latest official version of the laws or regulations is authoritative. Publication History First Published: January 2008 Revised April 2009 Revised January 2011 Reviewed with No Changes February 2012 PRINTING NOTE: This publication was designed for electronic distribution via the CBP website (http://www.cbp.gov) and is being distributed in a variety of formats. It was originally set up in Microsoft Word 2003®. Pagination and margins in downloaded versions may vary depending upon which word processor or printer you use. If you wish to maintain the original settings, you may wish to download the .pdf version, which can then be printed using the freely available Adobe Acrobat Reader®. 2 Eyewear Frames and Eyewear February 2012 PREFACE On December 8, 1993, Title VI of the North American Free Trade Agreement Implementation Act (Pub. L. 103-182, 107 Stat. 2057), also known as the Customs Modernization or “Mod” Act, became effective. These provisions amended many sections of the Tariff Act of 1930 and related laws. Two new concepts that emerge from the Mod Act are “informed compliance” and “shared responsibility,” which are premised on the idea that in order to maximize voluntary compliance with laws and regulations of U.S.
[Show full text]
11 Eye Protection
11 EYE PROTECTION Spectacles (Class 1 Eye Protection) CSA Standard Z94.3-15 requires that Class 1 Proper eye protection can reduce the risk of an eye spectacles incorporate side protection. Most side injury. However, eye protection is not the whole shields are permanently attached to the eyewear, answer. Knowing the hazards, using the proper but some may be detachable (Figure 11-1). tools, and establishing safe work procedures is also very important. Class 1A Spectacles with side protection Class 1B Like any other manufactured product, eye Spectacles with side and radiation protection protection has material, engineering, and design limitations. But selecting the proper eye protection to match the specific construction hazard can help Figure 11-1: Types of Class 1 Eye Protection reduce the number and severity of eye injuries. Considering that one out of every two construction workers may suffer a serious eye injury during Goggles (Class 2 Eye Protection) their career, the importance of wearing proper There are two types of goggles: eye protection cannot be overemphasized. In the hazardous environment of the construction 1. Eyecup goggles industry, wearing proper eye protection on a 2. Cover goggles. jobsite should be a mandatory policy, not just a Both must meet the CAN/CSA Z94.3-15. recommended practice. Eyecup goggles (Figure 11-2) completely cover Classes of Eye Protectors the eye socket to give all-round protection. They have adjustable or elasticized headbands and are Before outlining the type(s) of eye protectors equipped with ventilation ports to allow air in and recommended for a particular work hazard, it is prevent fogging.
[Show full text]
Smart Sunglasses and Goggles Based on Electrochromic Polymers
Smart Sunglasses and Goggles Based on thieno[3,4-b][1,4]dioxepine] (PProDOT-Me2), to fabricate and characterize the lens of prototype smart sunglasses. The PProDOT- Electrochromic Polymers Me2 EC film exhibits high transmittance contrast ratio (Δ%T) between blue color and transparent state, low operation potentials, high Chao Ma, Minoru Taya and Chunye Xu* conductivity and high thermal stability6. The lens of smart sunglasses and goggles are multilayer Center of Intelligent Materials and Systems, University of Washington, structured ECD, as schemed in Figure 1. The electrochromic working Box 352600, Seattle, WA 98115 layer, PProDOT-Me2 film, is deposited on Indium Tin oxide (ITO) coated glass. The counter layer of the device is vanadium oxide (V2O5) *Corresponding author: [email protected] film, also deposited on ITO glass. The V2O5 film serves as an ion storage layer and works with the PProDOT-Me2 film as a pair. When ABSTRACT the EC film is reduced with an applied potential and changes color to - Today, people concern more and more about the sun’s harmful blue, the V2O5 film will absorb ClO4 simultaneously. When the EC film effects on the eyes and safety issues. Sunglasses and goggles can is oxidized with an opposite potential and changes to transparent state, + meet this need to protect the eyes from sun light damages and the V2O5 film will absorb Li . During switching, the V2O5 film maintains influences. This paper discusses the design, process and performance a light green color. There is also a transparent polymer gel electrolyte, - + of prototype smart sunglasses and goggles based on cathodic which is a good conductor for small ions such as ClO4 and Li and a electrochromic (EC) polymers, which show several merits compared to insulator for electrons, sandwiched between the working and counter traditional sunglasses materials as well as other smart window layers.
[Show full text]
Kit Contents
Virtual Reality Kit Contents Kit Contents 1 OculusGO VR headset in a black case. Oculus Go Standalone Virtual Reality Headset - 32GB goggles Remote control 2 Spare AA rechargeable batteries in a mini zipper bag 10 foot USB cable and USB wall plug adapter. 1 Google Cardboard VR Headset 1 Onn plastic smartphone VR Headset, Blue or Pink Laminated instruction manual 1 SteelSeries Stratus Duo Wireless Gaming Controller 1 iPad Mini 2 - 16GB 1 Apple USB charger cord 1 Apple wall plug adapter 1 Laminated sheet: Casting to the iPad Mini 1 Black 3 ring binder Black USB flash drive 7 laminated VR activities menus 1 laminated Oculus Go VR warnings notice Technology How-To Guide spiral-bound booklet - glossy card VR in Libraries spiral-bound booklet Keep Talking and Nobody Explodes: Bomb Defusal Manual spiral-bound booklet Clipboard Feedback form Plastic zippered bag with cleaning supplies: Clorox wipes Purell wipes Anti-static screen cleaners Grey screen cleaning micro cloth Introduction - 1 Virtual Reality Resource Kit ─ Introduction Virtual reality (VR) is defined as the computer-generated simulation of images or whole environments that can be experienced using special electronic equipment. Traditional virtual reality creates environments, allowing people to be “present” in that alternative environment. Content is consumed and experienced from a viewer-centric perspective. Augmented reality (AR) starts with the real world, usually as seen through a camera or seeming clear glasses, and overlays virtual objects and information. The game Pokemon Go is a good example of this. Spherical, immersive, or 360-degree video is a video that captures an entire scene in which the viewer can look up, down, and around.
[Show full text]
The Consumer's Choice in Athletic Eyewear
Pacific University CommonKnowledge College of Optometry Theses, Dissertations and Capstone Projects 5-1983 The consumer's choice in athletic eyewear Stan Matsuura Pacific University Dale E. Thompson Pacific University Recommended Citation Matsuura, Stan and Thompson, Dale E., "The consumer's choice in athletic eyewear" (1983). College of Optometry. 671. https://commons.pacificu.edu/opt/671 This Thesis is brought to you for free and open access by the Theses, Dissertations and Capstone Projects at CommonKnowledge. It has been accepted for inclusion in College of Optometry by an authorized administrator of CommonKnowledge. For more information, please contact [email protected]. The consumer's choice in athletic eyewear Abstract The consumer's choice in athletic eyewear Degree Type Thesis Degree Name Master of Science in Vision Science Committee Chair Norman S. Stern Subject Categories Optometry This thesis is available at CommonKnowledge: https://commons.pacificu.edu/opt/671 Copyright and terms of use If you have downloaded this document directly from the web or from CommonKnowledge, see the “Rights” section on the previous page for the terms of use. If you have received this document through an interlibrary loan/document delivery service, the following terms of use apply: Copyright in this work is held by the author(s). You may download or print any portion of this document for personal use only, or for any use that is allowed by fair use (Title 17, §107 U.S.C.). Except for personal or fair use, you or your borrowing library may not reproduce, remix, republish, post, transmit, or distribute this document, or any portion thereof, without the permission of the copyright owner.
[Show full text]
ZEISS Snow Goggle 2018/2019 Collection ZEISS Snow Goggles Marketing Material Download Area
ZEISS Snow Goggle 2018/2019 Collection ZEISS Snow Goggles Marketing material download area ZEISS Snow Goggle App for iPad. Detailed technical information for the sales force and the opticians. Available in the Apple Store from October 2018: “ZEISS SNOW GOGGLE 2018/2019”. Password: 1846. Download here: https://drive.google.com/open?id=15n8q3rrWqvGZJJvJupFwnRrawQkChHs6 • The PPT catalogue with the text content and technical info • The High resolution images • The Videos B2C for the end consumer and for social media distribution For any issues related to the marketing material, please contact: [email protected] [email protected] 2 About ZEISS Snow Goggles Intro The 2018/2019 collection offers a range of different goggles available in 5 designs, all produced in Italy: - Cylindrical - Interchangeable - Junior - Men‘s - Women’s The collection includes a range of performance lenses for every situations: - For bright light conditions: the Sunny Days series – dark tints and multilayer mirrors – and the ZEISS SONAR series. - For challenging light conditions: the Cloudy Days series and the ZEISS SONAR series – high contrast tints and performance coatings. - For glare reduction and optimized vision: the Pol effect series. Dedicated distribution channel: only available at optical shops. 3 About ZEISS Snow Goggles Collection Overview Interchangeable goggles Junior Goggles Men’s Goggles* Women’s Goggles* Cylindrical Goggles *Available until out-of-stock 4 ABOUT ZEISS SNOW GOGGLES Lenses series 5 About ZEISS goggle lenses Watch the Sonar video online ZEISS Sonar Series For challenging light conditions: cloudy or snowy days, dusk, dawn conditions. Innovative high contrast tint specifically developed to improve vision in the snow and detect obstacles, enhancing colors brightness and contrasts.
[Show full text]
Service Animals in Laboratories
2017 Accommodating Students with Service Animals in Teaching Laboratories PREPARED BY THE CHEMICAL SAFETY COMMITTEE IN COOPERATION WITH DISABILITY SUPPORT SERVICES AND THE OFFICE OF EQUITY AND COMPLIANCE NOVEMBER 2017 GUIDANCE FOR LAB EMPLOYEES Scope This guidance applies to University employees who need to accommodate students with conditions or disabilities (permanent or temporary) that require a service animal. This is not intended to substitute for guidance from Disability Support Services (DSS), nor does this override the University policy for Animals in Buildings. All students with disabilities are encouraged to access the services available through DSS, however, students who require a service animal are not required to contact DSS. This guideline is intended for teaching laboratory employees but may be used for research laboratory applications as well. Definition The ADA defines a service animal as: “any dog that is individually trained to do work or perform tasks for the benefit of an individual with a disability, including a physical, sensory, psychiatric, intellectual, or other mental disability. Other species of animals, whether wild or domestic, trained or untrained, are not service animals for the purposes of this definition.” 28CFR Part 35 A provision of the final rule covers miniature horses that have been trained to do work or perform tasks for the benefit of an individual with a disability; 28 CFR 35.136(i). Goal The University intends all students to be safe and successful in the laboratories. We welcome students to share any personal information they feel is pertinent for their instructors to have in order to help the student be successful.
[Show full text]