DOCSLIB.ORG

Fuel Cell Handbook (Seventh Edition)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fuel Cell Handbook (Seventh Edition) Fuel Cell Handbook (Seventh Edition) By EG&G Technical Services, Inc. Under Contract No. DE-AM26-99FT40575 U.S. Department of Energy Office of Fossil Energy National Energy Technology Laboratory P.O. Box 880 Morgantown, West Virginia 26507-0880 November 2004 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or respon- sibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manu- facturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Govern- ment or any agency thereof. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, 175 Oak Ridge Turnpike, Oak Ridge, TN 37831; prices available at (423) 576-8401, fax: (423) 576-5725, E-mail: [email protected] Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Road, Springfield, VA 22161; phone orders accepted at (703) 487-4650. TABLE OF CONTENTS Section Title Page 1. TECHNOLOGY OVERVIEW ................................................................................................. 1-1 1.1 INTRODUCTION ................................................................................................................ 1-1 1.2 UNIT CELLS ..................................................................................................................... 1-2 1.2.1 Basic Structure ................................................................................................... 1-2 1.2.2 Critical Functions of Cell Components.............................................................. 1-3 1.3 FUEL CELL STACKING ..................................................................................................... 1-4 1.3.1 Planar-Bipolar Stacking ..................................................................................... 1-4 1.3.2 Stacks with Tubular Cells .................................................................................. 1-5 1.4 FUEL CELL SYSTEMS....................................................................................................... 1-5 1.5 FUEL CELL TYPES............................................................................................................ 1-7 1.5.1 Polymer Electrolyte Fuel Cell (PEFC)............................................................... 1-9 1.5.2 Alkaline Fuel Cell (AFC)................................................................................. 1-10 1.5.3 Phosphoric Acid Fuel Cell (PAFC).................................................................. 1-10 1.5.4 Molten Carbonate Fuel Cell (MCFC) .............................................................. 1-11 1.5.5 Solid Oxide Fuel Cell (SOFC) ......................................................................... 1-12 1.6 CHARACTERISTICS......................................................................................................... 1-12 1.7 ADVANTAGES/DISADVANTAGES................................................................................... 1-14 1.8 APPLICATIONS, DEMONSTRATIONS, AND STATUS ........................................................ 1-15 1.8.1 Stationary Electric Power................................................................................. 1-15 1.8.2 Distributed Generation ..................................................................................... 1-20 1.8.3 Vehicle Motive Power...................................................................................... 1-22 1.8.4 Space and Other Closed Environment Power .................................................. 1-23 1.8.5 Auxiliary Power Systems................................................................................. 1-23 1.8.6 Derivative Applications.................................................................................... 1-32 1.9 REFERENCES.................................................................................................................. 1-32 2. FUEL CELL PERFORMANCE............................................................................................... 2-1 2.1 THE ROLE OF GIBBS FREE ENERGY AND NERNST POTENTIAL........................................ 2-1 2.2 IDEAL PERFORMANCE ..................................................................................................... 2-4 2.3 CELL ENERGY BALANCE ................................................................................................. 2-7 2.4 CELL EFFICIENCY ............................................................................................................ 2-7 2.5 ACTUAL PERFORMANCE................................................................................................ 2-10 2.6 FUEL CELL PERFORMANCE VARIABLES........................................................................ 2-18 2.7 MATHEMATICAL MODELS............................................................................................. 2-24 2.7.1 Value-in-Use Models ....................................................................................... 2-26 2.7.2 Application Models.......................................................................................... 2-27 2.7.3 Thermodynamic System Models...................................................................... 2-27 2.7.4 3-D Cell / Stack Models................................................................................... 2-29 2.7.5 1-D Cell Models............................................................................................... 2-31 2.7.6 Electrode Models.............................................................................................. 2-32 2.8 REFERENCES.................................................................................................................. 2-33 3. POLYMER ELECTROLYTE FUEL CELLS ........................................................................ 3-1 3.1 CELL COMPONENTS......................................................................................................... 3-1 3.1.1 State-of-the-Art Components ............................................................................. 3-2 3.1.2 Component Development................................................................................. 3-11 3.2 PERFORMANCE .............................................................................................................. 3-14 iii 3.3 PEFC SYSTEMS.............................................................................................................. 3-16 3.3.1 Direct Hydrogen PEFC Systems ...................................................................... 3-16 3.3.2 Reformer-Based PEFC Systems....................................................................... 3-17 3.3.3 Direct Methanol Fuel Cell Systems ................................................................. 3-19 3.4 PEFC APPLICATIONS..................................................................................................... 3-21 3.4.1 Transportation Applications............................................................................. 3-21 3.4.2 Stationary Applications.................................................................................... 3-22 3.5 REFERENCES.................................................................................................................. 3-22 4. ALKALINE FUEL CELL ......................................................................................................... 4-1 4.1 CELL COMPONENTS......................................................................................................... 4-5 4.1.1 State-of-the-Art Components ............................................................................. 4-5 4.1.2 Development Components ................................................................................. 4-6 4.2 PERFORMANCE ................................................................................................................ 4-7 4.2.1 Effect of Pressure ............................................................................................... 4-8 4.2.2 Effect of Temperature ........................................................................................ 4-9 4.2.3 Effect of Impurities .......................................................................................... 4-11 4.2.4 Effects of Current Density................................................................................ 4-12 4.2.5 Effects of Cell Life........................................................................................... 4-14 4.3 SUMMARY OF EQUATIONS FOR AFC............................................................................. 4-14 4.4 REFERENCES.................................................................................................................. 4-16 5. PHOSPHORIC ACID FUEL CELL .......................................................................................
Load more

Recommended publications
  • Energy Technology Perspectives 2020
    Energy Technology Perspectives 2020 A path for the decarbonisation of the buildings sector 14 December 2020 Page 1 Opening remarks Timur Gül Head, Energy Technology Policy Division, International Energy Agency (IEA) The IEA buildings technology work across four main deliverables Energy Technology Tracking clean energy Special Report on Clean Technology guide progress Perspectives Innovation Tracking Clean Energy Progress Assessing critical energy technologies for global clean energy transitions The IEA is unfolding a series of resources setting an ambitious pathway to reach the Paris Agreement and other Sustainable Development goals. Opening remarks Roland Hunziker Director, Sustainable Buildings and Cities, World Business Council for Sustainable Development (WBCSD) Energy Technology Perspectives 2020 presentation Thibaut ABERGEL Chiara DELMASTRO Co-leads, Buildings Energy Technology, Energy Technology Policy Division, International Energy Agency (IEA) Commitment to net-zero emissions is globalising Share of energy-related CO2 emissions covered by national and supra-national public net-zero emissions targets as of 01st SeptemberDecember 20202020 Carbon or climate 100% 10 neutrality target 80% 8 No target 2 60% 6 Under discussion GtCO 40% 4 In policy document 20% 2 Proposed legislation 0% 0 In law Total emissions (right axis) Countries responsible for around 60% of global energy-related CO2 emissions have formulated net-zero emissions ambitions in laws, legislation, policy documents or official discussions. Source: IEA (2020),| Credit Energyphoto
    [Show full text]
  • Blending Hydrogen Into Natural Gas Pipeline Networks: a Review of Key Issues
    Blending Hydrogen into Natural Gas Pipeline Networks: A Review of Key Issues M. W. Melaina, O. Antonia, and M. Penev NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Technical Report NREL/TP-5600-51995 March 2013 Contract No. DE-AC36-08GO28308 Blending Hydrogen into Natural Gas Pipeline Networks: A Review of Key Issues M. W. Melaina, O. Antonia, and M. Penev Prepared under Task No. HT12.2010 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory Technical Report 15013 Denver West Parkway NREL/TP-5600-51995 Golden, Colorado 80401 March 2013 303-275-3000 • www.nrel.gov Contract No. DE-AC36-08GO28308 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof.
    [Show full text]
  • Residential Solid Oxide Fuel Cell Generator Fuelled by Ethanol
    Residential Solid Oxide Fuel Cell Generator Fuelled by Ethanol: Cell, Stack, and System Modelling with a Preliminary Experiment Andrea Lanzini, Massimo Santarelli, Gianmichele Orsello To cite this version: Andrea Lanzini, Massimo Santarelli, Gianmichele Orsello. Residential Solid Oxide Fuel Cell Generator Fuelled by Ethanol: Cell, Stack, and System Modelling with a Preliminary Experiment. Fuel Cells, Wiley-VCH Verlag, 2010, 10 (4), pp.654. 10.1002/fuce.201000004. hal-00552373 HAL Id: hal-00552373 https://hal.archives-ouvertes.fr/hal-00552373 Submitted on 6 Jan 2011 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Fuel Cells Residential Solid Oxide Fuel Cell Generator Fuelled by Ethanol: Cell, Stack, and System Modelling with a Preliminary Experiment For Peer Review Journal: Fuel Cells Manuscript ID: fuce.201000004.R1 Wiley - Manuscript type: Original Research Paper Date Submitted by the 30-Mar-2010 Author: Complete List of Authors: Lanzini, Andrea; Politecnico di Torino, Energetics Santarelli, Massimo; Politecnico di Torino, Energetics Orsello, Gianmichele;
    [Show full text]
  • Fuel Cells and Environmental, Energy, and Other Clean Energy Technologies…
    Energy Efficiency & Renewable Energy U.S. Department of Energy Fuel Cell Technologies Program Nancy L. Garland, Ph.D. Technology Development Manager Fuel Cell Technologies Program Energy Efficiency and Renewable Energy United States Department of Energy Washington, D.C. 18th WWorldo rld Hydrogen EnergyEnergy Conference 2010 Essen, Germany May 17, 2010 Advancing Presidential Priorities Energy efficiency and renewable energy research , development , and deployment activities help the U.S. meet its economic, energy security, and environmental challenges concurrently. Energy Security Economic • Deploy the cheapest, cleanest, • Create green jobs through fastest energy source – energy Recovery Act energy projects efficiency • Double renewable energy • One million plug-in hybrid cars generation by 2012 on the road by 2015 Presidential Priorities • Weatherize one million homes • Develop the next generation of annually sustainable biofuels and infrastructure • Increase fuel economy standards Environmental • Implement an economy-wide cap-and-trade program to reduce greenhouse gas emissions 80 percent by 2050 • Make the US a leader on climate change • Establish a national low carbon fuel standard U.S. DOE President’s National Objectives for DOE— Energy to Secure America’s Future • Quickly Implement the Economic Recovery Package: Create Millions of New Green Jobs and Lay the Foundation for the Future • Restore Science Leadership: Strengthen America ’s Role as the World Leader in Science and Technology • Reduce GHG Emissions: Drive emissions 20 Percent below 1990 levels by 2020 • Enhance Energy Security: Save More Oil than the U.S currently imports from the Middle East and Venezuela combined within 10 years • Enhance Nuclear Security: Strengthen non-proliferation activities, reduce global stockpiles of nuclear weapons, and maintain safety and reliability of the US stockpile First Principle: Pursue material and cost-effective measures with a sense of urgency From: Secretary Chu’s presentation on DOE Goal’s and Targets, 5/5/09 U.S.
    [Show full text]
  • Hydrogen Delivery Roadmap
    Hydrogen Delivery Hydrogen Storage Technologies Technical Team Roadmap RoadmapJuly 2017 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non‐binding, and nonlegal partnership among the U.S. Department of Energy; United States Council for Automotive Research (USCAR), representing Chrysler Group LLC, Ford Motor Company, and General Motors; five energy companies — BPAmerica, Chevron Corporation, Phillips 66 Company, ExxonMobil Corporation, and Shell Oil Products US; two utilities — Southern California Edison and DTE Energy; and the Electric Power Research Institute (EPRI). The Hydrogen Delivery Technical Team is one of 13 U.S. DRIVE technical teams (“tech teams”) whose mission is to accelerate the development of pre‐competitive and innovative technologies to enable a full range of efficient and clean advanced light‐duty vehicles, as well as related energy infrastructure. For more information about U.S. DRIVE, please see the U.S. DRIVE Partnership Plan, https://energy.gov/eere/vehicles/us-drive-partnership-plan-roadmaps-and-accomplishments or www.uscar.org. Hydrogen Delivery Technical Team Roadmap Table of Contents Acknowledgements .............................................................................................................................................. vi Mission .................................................................................................................................................................
    [Show full text]
  • Appendix A: Solid Oxide Fuel Cell Primer
    Appendix A: Solid Oxide Fuel Cell Primer This section is not a comprehensive discussion of all potential components and applications of SOFCs; rather, it is intended to provide a conceptual overview of the basic components and functions of a SOFC supporting a vocabulary within which policymakers can debate and formulate policy decisions. A SOFC is an electrochemical device that generates electricity by oxidizing fuel such as natural gas or synthetic gas produced from coal. When commercialization of SOFCs is achieved, they can become a desirable and significant source of electricity in the United States and the world because they are efficient, reliable, adaptable, and produce low levels of emissions. When the fuel is hydrogen the only byproducts are water and heat, which can be used to support heat and power systems. In a SOFC, electricity is generated through an electrochemical reaction and not through a combustion process. The operating principles of fuel cells are similar to those of batteries, given they produce electricity without combustion or emissions. Unlike batteries, SOFCs do not run down or need to recharge; they only require a constant source of fuel and oxygen. A single fuel cell consists of three basic components1: (1) an anode, (2) a cathode, and (3) an electrolyte that separates them (see Figure 1). Bipolar plates on either side of the cell distribute gases and serve as current conductors. The Anode is the negative electrode that releases electrons to the external circuit and oxidizes fuel during the electrochemical reaction. The Cathode is the positive electrode that acquires electrons from the external circuit and is reduced during the electrochemical reaction.
    [Show full text]
  • Drivers of Innovation in Energy and Fuel Cell Technology: Supply-Demand and R&D
    Drivers of Innovation in Energy and Fuel Cell Technology: Supply-Demand and R&D Madeline Woodruff IEA and Yukiko Fukasaku OECD 1 Overview Q Drivers of energy technology innovation – Sustained increase in demand – Diversification of sources of fossil fuel supply due to growing security and economic concerns – Fuel switching and development of new fuels due to efficiency and environmental concerns – De-regulation and increasing competition Q Increasing importance of R&D and technological innovation Q How the energy innovation system works Q Focus on fuel cells 2 Part I Supply, Demand, and Investment Trends Role of Fuel Cells in the Energy System 3 4 Today’s Energy Reference Word Primary Energy Demand Challenges 6,000 WEO 2002 Oil Q Energy security to fuel economic 5,000 growth and mobility Gas 4,000 and Coal 3,000 curbing environmental and climate Nuclear damage from energy use 2,000 Hydro 1,000 Other – “business as usual” energy renewables demand is rising inexorably 0 1970 1980 1990 2000 2010 2020 2030 – greenhouse gas emissions also – stronger policies stabilize OECD emissions only after 2020. Reference Energy-Related CO2 Emissions WEO 2002 Q Access to modern energy for all – 1.6 billion people have no access 45000 to electricity, 80% of them in 40000 World South Asia and sub-Saharan 35000 30000 OECD Africa 25000 Transition 20000 Q Lower costs in deregulated Economies 15000 markets; infrastructure stresses Developing 10000 Million Tonnes CO2 Tonnes Million Countries 5000 0 1971 1990 2000 2010 2020 2030 5 Renewables Growing Fast, but From
    [Show full text]
  • Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems
    energies Review Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems Qaisar Abbas 1 , Mojtaba Mirzaeian 2,3,*, Michael R.C. Hunt 1, Peter Hall 2 and Rizwan Raza 4 1 Centre for Materials Physics, Department of Physics, Durham University, Durham DH1 3LE, UK; [email protected] (Q.A.); [email protected] (M.R.H.) 2 School of Computing, Engineering and Physical Sciences, University of the West of Scotland, Paisley PA1 2BE, UK; [email protected] 3 Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty 050040, Kazakhstan 4 Clean Energy Research Lab (CERL), Department of Physics, COMSATS University Islamabad, Lahore 54000, Pakistan; [email protected] * Correspondence: [email protected] Received: 30 September 2020; Accepted: 26 October 2020; Published: 9 November 2020 Abstract: Electrochemical energy storage and conversion systems such as electrochemical capacitors, batteries and fuel cells are considered as the most important technologies proposing environmentally friendly and sustainable solutions to address rapidly growing global energy demands and environmental concerns. Their commercial applications individually or in combination of two or more devices are based on their distinguishing properties e.g., energy/power densities, cyclability and efficiencies. In this review article, we have discussed some of the major electrochemical energy storage and conversion systems and encapsulated their technological advancement in recent years. Fundamental working principles and material compositions of various components such as electrodes and electrolytes have also been discussed. Furthermore, future challenges and perspectives for the applications of these technologies are discussed.
    [Show full text]
  • Wind Energy Technology Data Update: 2020 Edition
    Wind Energy Technology Data Update: 2020 Edition Ryan Wiser1, Mark Bolinger1, Ben Hoen, Dev Millstein, Joe Rand, Galen Barbose, Naïm Darghouth, Will Gorman, Seongeun Jeong, Andrew Mills, Ben Paulos Lawrence Berkeley National Laboratory 1 Corresponding authors August 2020 This work was funded by the U.S. Department of Energy’s Wind Energy Technologies Office, under Contract No. DE-AC02-05CH11231. The views and opinions of the authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, or The Regents of the University of California. Photo source: National Renewable Energy Laboratory ENERGY T ECHNOLOGIES AREA ENERGY ANALYSISAND ENVIRONMENTAL I MPACTS DIVISION ELECTRICITY M ARKETS & POLICY Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or The Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, or The Regents of the University of California.
    [Show full text]
  • Fuel Properties Comparison
    Alternative Fuels Data Center Fuel Properties Comparison Compressed Liquefied Low Sulfur Gasoline/E10 Biodiesel Propane (LPG) Natural Gas Natural Gas Ethanol/E100 Methanol Hydrogen Electricity Diesel (CNG) (LNG) Chemical C4 to C12 and C8 to C25 Methyl esters of C3H8 (majority) CH4 (majority), CH4 same as CNG CH3CH2OH CH3OH H2 N/A Structure [1] Ethanol ≤ to C12 to C22 fatty acids and C4H10 C2H6 and inert with inert gasses 10% (minority) gases <0.5% (a) Fuel Material Crude Oil Crude Oil Fats and oils from A by-product of Underground Underground Corn, grains, or Natural gas, coal, Natural gas, Natural gas, coal, (feedstocks) sources such as petroleum reserves and reserves and agricultural waste or woody biomass methanol, and nuclear, wind, soybeans, waste refining or renewable renewable (cellulose) electrolysis of hydro, solar, and cooking oil, animal natural gas biogas biogas water small percentages fats, and rapeseed processing of geothermal and biomass Gasoline or 1 gal = 1.00 1 gal = 1.12 B100 1 gal = 0.74 GGE 1 lb. = 0.18 GGE 1 lb. = 0.19 GGE 1 gal = 0.67 GGE 1 gal = 0.50 GGE 1 lb. = 0.45 1 kWh = 0.030 Diesel Gallon GGE GGE 1 gal = 1.05 GGE 1 gal = 0.66 DGE 1 lb. = 0.16 DGE 1 lb. = 0.17 DGE 1 gal = 0.59 DGE 1 gal = 0.45 DGE GGE GGE Equivalent 1 gal = 0.88 1 gal = 1.00 1 gal = 0.93 DGE 1 lb. = 0.40 1 kWh = 0.027 (GGE or DGE) DGE DGE B20 DGE DGE 1 gal = 1.11 GGE 1 kg = 1 GGE 1 gal = 0.99 DGE 1 kg = 0.9 DGE Energy 1 gallon of 1 gallon of 1 gallon of B100 1 gallon of 5.66 lb., or 5.37 lb.
    [Show full text]
  • H2@Railsm Workshop
    SANDIA REPORT SAND2019-10191 R Printed August 2019 H2@RailSM Workshop Workshop and report sponsored by the US Department of Energy Office of Energy Efficiency and Renewable Energy Fuel Cell Technologies Office, and the US Department of Transportation Federal Railroad Administration. Prepared by Mattie Hensley, Jonathan Zimmerman Prepared by Sandia National Laboratories Albuquerque, New MexiCo 87185 and Livermore, California 94550 Issued by Sandia National Laboratories, operated for the United States Department of Energy by National Technology & Engineering Solutions of Sandia, LLC. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use would not infringe privately owned rights. References herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government, any agency thereof, or any of their contractors or subcontractors. The views and opinions expressed herein do not necessarily state or reflect those of the United States Government, any agency thereof, or any of their contractors. Printed in the United States of America. This report has been reproduced directly from the best available copy. Available to DOE and DOE contractors from U.S. Department of Energy Office of Scientific and Technical Information P.O.
    [Show full text]
  • Making Markets for Hydrogen Vehicles: Lessons from LPG
    Making Markets for Hydrogen Vehicles: Lessons from LPG Helen Hu and Richard Green Department of Economics and Institute for Energy Research and Policy University of Birmingham Birmingham B15 2TT United Kingdom Hu: [email protected] Green: [email protected] +44 121 415 8216 (corresponding author) Abstract The adoption of liquefied petroleum gas vehicles is strongly linked to the break-even distance at which they have the same costs as conventional cars, with very limited market penetration at break-even distances above 40,000 km. Hydrogen vehicles are predicted to have costs by 2030 that should give them a break-even distance of less than this critical level. It will be necessary to ensure that there are sufficient refuelling stations for hydrogen to be a convenient choice for drivers. While additional LPG stations have led to increases in vehicle numbers, and increases in vehicles have been followed by greater numbers of refuelling stations, these effects are too small to give self-sustaining growth. Supportive policies for both vehicles and refuelling stations will be required. 1. Introduction While hydrogen offers many advantages as an energy vector within a low-carbon energy system [1, 2, 3], developing markets for hydrogen vehicles is likely to be a challenge. Put bluntly, there is no point in buying a vehicle powered by hydrogen, unless there are sufficient convenient places to re-fuel it. Nor is there any point in providing a hydrogen refuelling station unless there are vehicles that will use the facility. What is the most effective way to get round this “chicken and egg” problem? Data from trials of hydrogen vehicles can provide information on driver behaviour and charging patterns, but extrapolating this to the development of a mass market may be difficult.
    [Show full text]