Workingman's 2X10C
Total Page:16
File Type:pdf, Size:1020Kb
Workingman’s 2X10C OWNER’S MANUALMANUALOWNER’S SWR • SCOTTSDALE, AZ • USA IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER TO A QUALIFIED SERVICE TECHNICIAN. A. READ INSTRUCTIONS: All safety and operation instructions should be read before the product is operated. B. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. C. HEED WARNINGS: All of the warnings on this product and in the operating instructions should be adhered to. D. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. E. CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly damp cloth for cleaning. F. WATER AND MOISTURE: Do not use this product near water; for example, near a swimming pool, wet basement, and the like. G. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. H. VENTILATION: Slots and openings in the unit are provided for ventilation and to ensure reliable operation of the product, to protect it from overheating, thus these openings must not be blocked or covered. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. I. GROUNDING: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. J. POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them, paying particular attention to cords at plugs and the point where they exit the product. K. LIGHTNING: For added protection of this product during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. L. OVERLOADING: Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. M. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through the openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. N. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. O. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 1) When the power supply cord has been damaged 2) If liquid has been spilled or objects have fallen into the product 3) If the product has been exposed to rain, water, or other conductive liquids 4) If the product does not operate normally by following the operating instructions 5) If the product has been dropped or damaged in any way 6) When the product exhibits a distinct change in performance. P. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Q. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. R. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves or other products that produce heat. INTRODUCTIONINTRODUCTION Congratulations on your purchase of the Workingman's 2x10C Bass Combo Amplifier! You now own the most powerful combo amp in SWR's world-renowned Workingman's Line of products, a line designed for bassists who expect typical SWR professional quality at affordable prices. In today's crowded market, it's easy to forget that SWR pioneered the concept of the 2x10 + tweeter bass combo amp in the late 1980's with the introduction of the now-famous Redhead. The piece quickly became the first-call amplifier of first-call studio musicians in New York and Los Angeles, attaining legendary status for its crystal-clear sound, studio-specific feature set, and ample headroom. As its reputation grew, more and more people began using it as a live application amplifier, sometimes with a 2x10 or 1x15 extension cabinet hooked up to take full advantage of the amplifier's tone and power capabilities. Meanwhile, over time, we received numerous requests from our customers to produce a line of products that would incorporate SWR's accurate sound, high reliability, quality components, and hand-made craftsmanship - but at an overall lower cost. This resulted in the development of the Workingman's Series of amplification from SWR. The precision electronic section featured in the Workingman's Series is entirely hand-built, employing a variety of technologies selected for their sound quality and practical usefulness in a roadworthy and studio-ready amplifier, including an all-discrete initial gain stage in the preamplifier section and discrete solid-state design in the power amplifier. Regardless of its lower price, the Workingman's Series offers no compromises of the essential SWR design and construction philosophy. Corners are not cut from a more elaborate model: rather, each product's design parameters are conceived from the ground up and the best available components are selected for each application. Such was the case with the Workingman's 4004 amplifier, a 260/400 watt head that has proven to be one of the most successful and widely-used products in SWR's history since its release in 1999. We constantly strive to listen to our customers, and you've told us repeatedly that you wanted a 2x10 + tweeter combo amp in the Workingman's Series. Keeping SWR's design philosophy in mind, we custom- designed a 10" driver specifically for this combo amp, tweaked the design of the popular Workingman's 4004 head, and listened and soundtested repeatedly until it met and exceeded the demands of the many bassists (from inside and outside the company) who tried it. The fast all-solid-state response, the 260-watts (stand- alone)/400 watts (with any Workingman's extension speaker) power delivery, and the famous SWR sound are all there. Just like you asked for. It's all part of SWR's commitment to providing today's bassists with the tools necessary for the pursuit of the ultimate goal: finding equipment that not only does the job, but actually enhances the overall musical experience and contributes to the creative process. Everyone here at SWR sincerely hopes that the purchase of your Workingman's 2x10C helps you get there from here…and beyond. Please take the time to read your Owner's Manual thoroughly and completely, so that you can realize the full potential of your new Workingman's 2x10C Bass Combo Amplifier. Once again, thanks for your purchase, and for letting SWR help Amplify Your Future.™ Sincerely, SWR NoteNote: Please take a moment to verify that the following items were included in your SWR Workingman's 2x10C packaging: AC Cable, (4) heavy-duty caster wheels, SWR Catalog. WORKINGMAN’S 2X10C OWNER’S MANUAL • 1 WORKINGMAN'S 2X10C - FRONT PANEL FEATURES • Discrete Solid State Front End • Balanced XLR Output • Tuner Out Jack • High and Low Sensitivity 1/4" Input Jacks • Gain Control with LED peak clipping indicator • Aural Enhancer Control • Bass Level Control • Lo Mid Level Control • Mid Level Control • Hi Mid Level Control • Treble Level Control • Effects Blend Control • Variable Limiter with Pull Defeat Option • Master Volume Control • Speakers (both internal and extension) On/Off Switch • Stereo Headphones Jack • Single Open Rack Space for effects unit of your choice WORKINGMAN'S 2X10C - REAR PANEL FEATURES (chassis and cabinet) • Side-Chain Effects Loop (Effects Send and Effects Return 1/4" jacks) • Extension Speaker 1/4" Output Jack • Speaker Fuse (3AG, 10-amp fast-blo) • Line Fuse (3AG, 7-amp slo-blo) • AC Power Cord Receptacle • Internal Speaker On/Off Switch • 3-Way Tweeter Mode Selector Switch (Full Range, -6db, Off) SPECIFICATIONS Power Ratings (minimum) 260 Watts @ 8 ohms (internal cabinet) 400 Watts @ 4 ohms (with 8-ohm extension cabinet) Minimum Impedance (amplifier) 4 ohms Frequency Response (power amplifier) -3dB @ 20 Hz and 40 kHz 2 • WORKINGMAN’S 2X10C OWNER’S MANUAL Speaker Complement (2) 10" custom designed cast-frame SWR drivers (1) LeSon TLX-1 Piezo Tweeter Cabinet Construction and Features 5/8" 7-ply, Maple or Birch plywood construction, waterproof glue. All joints Dado and Rabbet, glued and nailed. Front Slot Port designed to eliminate unwanted noise Heavy Duty Removable Casters Heavy Duty Spring Handles Midnight Blue Carpeting with Stack Lock Corners Midnight Blue Stamped Steel Vibration-Free Grill Dimensions 23"W x 23"H x 16.75"D Weight 76 lbs. WORKINGMAN'S 2X10C - GETTING STARTED Remove the AC cable from the accessory pack and connect it from the amplifier to a standard wall outlet. Make sure that the "Gain" and "Master Volume" controls are set to the minimum position (fully counter- clockwise).