DOCSLIB.ORG

Company Profiles

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Company Profiles HiroshimaHiroshima AerospaceAerospace IndustryIndustry StudyStudy GroupGroup The City of Hiroshima --------------October 2010-------------- Company Profiles Table of Contents Page Company 1 C-COM CO., LTD. 2 DaikyoNishikawa Corporation 3 GIKEN inc. 4 HAMADA Corporation 5 HEIWA MACHINERY Co., Ltd. 6 HIROBO LIMITED 7 HIRO KIKO CO., LTD. 8 HIROKO Jet Technology Co., Ltd. 9 Hirotani co., ltd. 10 HIVEC Inc. 11 ISHII HYOKI CO., LTD. 12 KASAMI Inc. 13 Kubota Iron Works Co., Ltd. 14 KYOEI Co., Ltd. 15 Masue Iron Works Co., Ltd. 16 Meikodo Co., Ltd. 17 meteco 18 MISASHI SEISAKUSYO Co., Ltd. 19 Morita Industries Co., Ltd. 20 MUKAI MANUFACTURING CO., LTD. 21 NAKAYOSHI ENGINEERING CORPORATION 22 NISHII MANUFACTURING CO., LTD. 23 Sangen Corporation 24 SHINKAWA Sensor Technology, Inc. 25 Shikibo Ltd. 26 Shinwa Metal Corporation 27 SUGIHARA CO., LTD. 28 Tanaka Kakouki Kogyo Co., Ltd. 29 TODA Co., Ltd. 30 Toyo Advanced Technologies Co., Ltd. Hiroshima Aerospace Industry Study Group C-COM CO., LTD. Address 5-2-41 Kohnan, Naka-ku, Hiroshima City, Japan 730-0825 TEL +81-82-249-4450 ＦＡＸ +81-82-246-7578 URL http://www.c-com.ne.jp/en E-mail [email protected] Founded December / 1984 Rep (Mr.) Hiroshi Iwamoto Capital 40 million Yen Employees 145 Dealers Kawasaki Heavy Industries, Ltd. IHI Corporation Mazda Motor Corporation Daihatsu Motor Co., Ltd. Suzuki Motor Corporation General Motors Corporation Ford Motor Company First Automobile Works Group and so on （Japan）Hiroshima, Nagoya Office/Plant （Abroad） 1. Fabrication of gas turbine and aircraft engine parts. 2. Fabrication of prototype body panels for automobiles and Major Lines construction equipment. of Business 3. Fabrication of Bullet train prototype body panels. 1. Fully integrated production system that encompasses planning, development, design, manufacturing and assembly. Extremely high efficient fully integrated production line which operates 24 hours a day. Large capacity production facilities, machinery, presses, laser machines and equipment. Utilize a wide variety of materials (aluminum, stainless steel, titanium, nickel and cobalt alloy). 2. World class engineering and craftsmanship with the fortitude and Strengths vision to create new possibilities. We have a very experienced advanced technically skilled and innovative group of engineers and craftsmen. Extremely confident in our ability to produce flawless world-class quality finished products. All welding joints, dies and moulds require microscopic finishing which is cared out meticulously by our highly-skilled production craftsmen. We are extremely confident and proud of the superior quality of our finished products. Certifications ISO 9001 ・ ISO 14001 ・ JIS Q 9100 - 1 - Hiroshima Aerospace Industry Study Group DaikyoNishikawa Corporation Address 2-1-19 Yano-shinmachi, Aki-ku, Hiroshima 736-0084 Japan TEL +81-82-885-9050 FAX +81-82-884-1614 URL http://www.daikyonishikawa.co.jp/en/ E-mail [email protected] Founded April / 2007 (Established by merger between GP Daikyo Corporation and Nishikawa Kasei Co., Ltd.) Rep (Mr.) Ｔｏｒｕ Ｏｋａ Capital Approx. 19.4 billion Yen Employees 2,300 Dealers Mazda Motor Corporation、Daihatsu Motor Co., Ltd.、 Other automobile manufacturing companies （Japan）Hiroshima、Yamaguchi、Mie Office/Plant （Abroad）China、Thailand Manufacturer of plastic automotive parts: 1. Interior parts: Instrument panels, center modules, decoration panels, rear consoles, indicator panels, change knobs and glove compartments. 2. Trim parts: Door trim, trunk side trim, trunk boards, door modules, sun Major Lines visors, assist handles and pillar trim. of Business 3. Exterior parts: Bumpers, radiator grilles, side step moldings, rear spoilers, lift gate modules, license garnish, roofs and roof racks. 4. Engine parts: Piping systems, shroud panels, PS tanks, cylinder head covers, oil strainers, intake manifolds and engine covers. 1. Possess a broad range of blow molding technologies, capable of everything from precision molding to the creation of large-size products. Also created a production system which synchronizes molding and secondary machining in order to meet all kinds of client needs. Our molding technology allows continual shortening of development periods and molding cycles. 2. Leads the industry with top class urethane foam molding technical abilities, covering everything from material development to mass production. Among our production technologies are insert moldings (high quality and low cost), powder slash molding for highly varied designs and texture needs, continuous vacuum Strengths moldings (operate on one of the highest cycles in the industry), and the creation of trim-less products. 3. With the development of environmentally-friendly paints and the use of painting robots and electrostatic painting, we are able to provide high-quality painting for a broad range of plastic materials including thermoplastics and thermosetting plastics. 4. Able to achieve ultra-short delivery times. For example, DaikyoNishikawa has completed the process for a bumper (from order to design, prototype, and mass production) in only 10 months. 5. Innovative company which remains one step ahead of its customers' needs. Certifications ISO 9001 ・ ISO 14001 Patents Holds numerous auto part patents - 2 - Hiroshima Aerospace Industry Study Group GIKEN inc. Address 834-2, Hinokio, Tsuta, Hatsukaichi City, Hiroshima Pref. 738-0222 Japan TEL +82-829-72-1144 FAX +81-829-72-1600 URL http://www.gkn.co.jp E-mail [email protected] Founded November / 1981 Rep (Mr.) Shigetaka Morita Capital 10 million Yen Employees 25 Dealers Mazda Motor Corporation、 DaikyoNishikawa Corporation、 The Japan Steel Works, LTD、Molten Corporation （Japan） Group Companies; Hamamatsu(Creative Technology Inc.) Office/Plant （Abroad） Group Companies; Korea, Thailand, India, Canada 1. Automotive Design Sketching Computer graphics Clay models 3D data and laser measuring 2. Automotive Product Development Product Major Lines Mechanism design of Business ABS modeling and analysis 3. Automotive Prototype Development Plastic and metal dies/molds Machining Vacuum injection molds and extruded molds Molds for rubber Various other dies/molds. 4. Small lot production. from casting/molding to assembly 1. Design services, product design, prototype development and production, die and mould manufacturing, and small lot product manufacturing. 2. Integrated company with the ability to take on any or all of the four Strengths lines of business (1~4) listed above. 3. Very personal and flexible client services 4. Experience in creating ergonomic mock ups models for aircraft. Certifications ISO 9001 ・ ISO 14001 - 3 - Hiroshima Aerospace Industry Study Group HAMADA Corporation Address 1-9-41 Mokage, Fuchu-cho, Aki-gun, Hiroshima Pref. 735-0029 Japan TEL +81-82-281-6341 FAX +81-82-285-0531 URL http://www.kk-hamada.co.jp/index_e.html E-mail [email protected] Founded April / 1953 Rep (Mr.) Tadahiko Hamada Capital 30 Million Yen Employees 130 Dealers Mazda Motor Corporation, Ondo Corporation, Toyo Advanced Technologies Co., Ltd, Hiroshima Aluminum Industry Co., Ltd, Yoshiwa Kogyo Co., Ltd, （Japan）357-1, Muneyoshi, Hachihonnmatsu-cho, Office/Plant Higashi Hiroshima, Hiorshima Pref., 739-0145, Japan （Abroad） 1. Automobile Parts Power Train Components (Drive Pinions, etc…) Various AT and CVT Pump Components (Oil Pump Covers, Housings, Various Bushings, etc…) Major Lines MT Components (Change Levers, Pressure Plate, etc…) of Business Engine Components 2. Sports Equipment Golf Equipment (Irons) 1. Design and development of machinery, jigs and cutting tools for machining aluminum, stainless steel, cast and forged steel products, and difficult-to-cut materials. 2. Specialists in spherical machining. Developed proprietary machinery, cutting tools, and methods for processing any type of Strengths spherical machining. 3. Sate-of-the-art, high precision, high quality spherical machining capability. We can produce extremely high degrees of sphericity with very low degrees of surface roughness in materials that are impossible for a general NC lathe to achieve. Certifications ISO 9001 ・ ISO 14001 - 4 - Hiroshima Aerospace Industry Study Group HEIWA MACHINERY Co ., Ltd. Address 1-17-9 Kamiseno, Aki-ku, Hiroshima 730-0301 Japan TEL +81-82-894-0088 FAX +81-82-894-0471 URL http://www.heiwakikai.co.jp E-mail [email protected] Founded May / 1987 Rep (Mr.) Yasuhiko Arita Capital 10 Million Yen Employees 50 Dealers Webasto Japan Co., Ltd.、MG Precision Co., Ltd.、 The Japan Steel Works, Ltd.,、KYOCERA Corporation、 TEIJIN PHARMA LIMITED、MITOKOGYO CO. LTD.,、Choshu Industry （Japan） Office/Plant （Abroad） 1. Machining Press molds/dies Various jigs including inspection jigs Major Lines Precision parts of Business 2. Integrated manufacturing from single unit wire machining to mass production machining. 1. All our machining tools and equipment are high-precision and high-speed machines. We are able to provide quality high-precision machining services with quick delivery. 2. Flawless quality assurance due to our exceptional inspection systems. 3. Exceptional detailed high quality manufacturing capabilities as a result of the combination of our advanced machinery and highly Strengths skilled engineers & craftsmen. 4. Wide scope in machining and manufacturing capabilities, from very detailed high precision machining to cutting of large heavy dies. 5. Designing and developing prototype manufacturing through 3D CAD and CAM. Certifications ISO 9001 - 5 - Hiroshima Aerospace Industry Study Group HIROBO LIMITED
Load more

Recommended publications
  • Contacts in Japan Contacts in Asia
    TheDirectoryof JapaneseAuto Manufacturers′ WbrldwidePurchaslng ● Contacts ● トOriginalEqulpment ● トOriginalEqulpment Service トAccessories トMaterials +RmR JA払NAuTOMOBILEMANUFACTURERSAssocIATION′INC. DAIHATSU CONTACTS IN JAPAN CONTACTS IN ASIA OE, Service, Accessories and Material OE Parts for Asian Plants: P.T. Astra Daihatsu Motor Daihatsu Motor Co., Ltd. JL. Gaya Motor 3/5, Sunter II, Jakarta 14350, urchasing Div. PO Box 1166 Jakarta 14011, Indonesia 1-1, Daihatsu-cho, Ikeda-shi, Phone: 62-21-651-0300 Osaka, 563-0044 Japan Fax: 62-21-651-0834 Phone: 072-754-3331 Fax: 072-751-7666 Perodua Manufacturing Sdn. Bhd. Lot 1896, Sungai Choh, Mukim Serendah, Locked Bag No.226, 48009 Rawang, Selangor Darul Ehsan, Malaysia Phone: 60-3-6092-8888 Fax: 60-3-6090-2167 1 HINO CONTACTS IN JAPAN CONTACTS IN ASIA OE, Service, Aceessories and Materials OE, Service Parts and Accessories Hino Motors, Ltd. For Indonesia Plant: Purchasing Planning Div. P.T. Hino Motors Manufacturing Indonesia 1-1, Hinodai 3-chome, Hino-shi, Kawasan Industri Kota Bukit Indah Blok D1 No.1 Tokyo 191-8660 Japan Purwakarta 41181, Phone: 042-586-5474/5481 Jawa Barat, Indonesia Fax: 042-586-5477 Phone: 0264-351-911 Fax: 0264-351-755 CONTACTS IN NORTH AMERICA For Malaysia Plant: Hino Motors (Malaysia) Sdn. Bhd. OE, Service Parts and Accessories Lot P.T. 24, Jalan 223, For America Plant: Section 51A 46100, Petaling Jaya, Hino Motors Manufacturing U.S.A., Inc. Selangor, Malaysia 290 S. Milliken Avenue Phone: 03-757-3517 Ontario, California 91761 Fax: 03-757-2235 Phone: 909-974-4850 Fax: 909-937-3480 For Thailand Plant: Hino Motors Manufacturing (Thailand)Ltd.
    [Show full text]
  • Suzuki Announces FY2019 Vehicle Recycling Results in Japan
    22 June 2020 Suzuki Announces FY2019 Vehicle Recycling Results in Japan Suzuki Motor Corporation has today announced the results of vehicle recycling for FY2019 (April 2019 to March 2020) in Japan, based on the Japan Automobile Recycling Law*1. In line with the legal mandate, Suzuki is responsible for promoting appropriate treatment and recycling of automobile shredder residue (ASR), airbags, and fluorocarbons through recycling fee deposited from customers. Recycling of these materials are appropriately, smoothly, and efficiently conducted by consigning the treatment to Japan Auto Recycling Partnership as for airbags and fluorocarbons, and to Automobile Shredder Residue Recycling Promotion Team*2 as for ASR. The total cost of recycling these materials was 3,640 million yen. Recycling fees and income generated from the vehicle-recycling fund totalled 4,150 million yen, contributing to a net surplus of 510 million yen. For the promotion of vehicle recycling, Suzuki contributed a total of 370 million yen from the above net surplus, to the Japan Foundation for Advanced Auto Recycling, and 20 million yen for the advanced recycling business of the Company. For the mid-and long-term, Suzuki continues to make effort in stabilising the total recycling costs. Moreover, besides the recycling costs, the Company bears 120 million yen as management-related cost of Japan Automobile Recycling Promotion Center and recycling-related cost of ASR. The results of collection and recycling of the materials are as follows. 1. ASR - 60,388.3 tons of ASR were collected from 450,662 units of end-of-life vehicles - Recycling rate was 96.7%, exceeding the legal target rate of 70% set in FY2015 since FY2008 2.
    [Show full text]
  • Defendants and Auto Parts List
    Defendants and Parts List PARTS DEFENDANTS 1. Wire Harness American Furukawa, Inc. Asti Corporation Chiyoda Manufacturing Corporation Chiyoda USA Corporation Denso Corporation Denso International America Inc. Fujikura America, Inc. Fujikura Automotive America, LLC Fujikura Ltd. Furukawa Electric Co., Ltd. G.S. Electech, Inc. G.S. Wiring Systems Inc. G.S.W. Manufacturing Inc. K&S Wiring Systems, Inc. Kyungshin-Lear Sales And Engineering LLC Lear Corp. Leoni Wiring Systems, Inc. Leonische Holding, Inc. Mitsubishi Electric Automotive America, Inc. Mitsubishi Electric Corporation Mitsubishi Electric Us Holdings, Inc. Sumitomo Electric Industries, Ltd. Sumitomo Electric Wintec America, Inc. Sumitomo Electric Wiring Systems, Inc. Sumitomo Wiring Systems (U.S.A.) Inc. Sumitomo Wiring Systems, Ltd. S-Y Systems Technologies Europe GmbH Tokai Rika Co., Ltd. Tram, Inc. D/B/A Tokai Rika U.S.A. Inc. Yazaki Corp. Yazaki North America Inc. 2. Instrument Panel Clusters Continental Automotive Electronics LLC Continental Automotive Korea Ltd. Continental Automotive Systems, Inc. Denso Corp. Denso International America, Inc. New Sabina Industries, Inc. Nippon Seiki Co., Ltd. Ns International, Ltd. Yazaki Corporation Yazaki North America, Inc. Defendants and Parts List 3. Fuel Senders Denso Corporation Denso International America, Inc. Yazaki Corporation Yazaki North America, Inc. 4. Heater Control Panels Alps Automotive Inc. Alps Electric (North America), Inc. Alps Electric Co., Ltd Denso Corporation Denso International America, Inc. K&S Wiring Systems, Inc. Sumitomo Electric Industries, Ltd. Sumitomo Electric Wintec America, Inc. Sumitomo Electric Wiring Systems, Inc. Sumitomo Wiring Systems (U.S.A.) Inc. Sumitomo Wiring Systems, Ltd. Tokai Rika Co., Ltd. Tram, Inc. 5. Bearings Ab SKF JTEKT Corporation Koyo Corporation Of U.S.A.
    [Show full text]
  • Suppliers to the New Nissan Cube
    Suppliers to the new Nissan Cube WIRING HARNESS PROTECTION: WIRING HARNESS: ADHESIVE TAPES: FUEL HOSE: WATER HOSE: HVAC: RAIN & LIGHT SENSORS: DOME LIGHT: SEATBELTS WITH PRETENSIONNERS: NAVIGATION SYSTEM: DELFINGEN FEDERAL-MOGUL TESA FEDERAL-MOGUL TRELLEBORG VALEO HELLA CML INNOVATIVE TECHNOLOGIES AUTOLIV BOSCH VACUUM PUMP: RADIO HEAD UNIT: KOLBENSCHMIDT PIERBURG CLARION SYSTEM PROTECTION PARTS: DASH INSULATOR: FEDERAL-MOGUL KASAI PISTONS: HAND LEVER PARKING BRAKE: KOLBENSCHMIDT PIERBURG OTSUKA KOKI CANISTER DRAIN CUT VALVE: MITSUBISHI ELECTRIC CURTAIN INFLATORS: TRW AUTOMOTIVE WATER PUMP: KOLBENSCHMIDT PIERBURG FUEL CAP: STANT CORPORATION ALTERNATOR: MITSUBISHI ELECTRIC DOOR TRIM: KASAI KOGYO O/P CHAIN: TSUBAKIMOTO SIDE DOOR LATCH: VALEO FUEL PUMP: TI AUTOMOTIVE FUEL TANK: TIMING TENSIONER: KAUTEX TEXTRON TSUBAKIMOTO SHOCK ABSORBERS: ENGINE SEALS: KYB FREUDENBERG 4WD DRIVE MODULE: GUIDE: GKN DRIVELINE TSUBAKIMOTO REAR AXLE [4WD]: KNOCK SENSORS: NTN CORPORATION CONTINENTAL ETC: TRANSMISSION SEALS: MITSUBISHI ELECTRIC FREUDENBERG MANUAL TRANSMISSION CLUTCH: REAR AXLE TWIST BEAM: VALEO YOROZU TORQUE CONVERTER ONE-WAY CLUTCH: FUEL SYSTEM: BORGWARNER A RAYMOND MANUAL TRANSMISSION HYDRAULIC SYSTEMS: FUEL DELIVERY MODULES: FACINGS: FRONT JOUNCE BUMPERS: FRONT AXLE BRAKING PADS: SIDESHAFTS: FRONT CVJ: LOWER CONTROL ARM: QUICK CONNECTORS: FUEL LINES: VALEO TI AUTOMOTIVE VALEO BASF CELLASTO HONEYWELL GKN DRIVELINE NTN CORPORATION YOROZU A RAYMOND TI AUTOMOTIVE Suppliers wanted: If you are a supplier and have questions or want your information considered for our cutaway features, contact Steven Wingett at [email protected] or through www.supplierbusiness.com.
    [Show full text]
  • Service and Parts Are Now Open Every Tuesday Night Until 7 Pm
    SCHWARTZ MAZDA SEPTEMBER 2019 BOOKMARK & SHARE: SERVICE AND PARTS ARE NOW OPEN EVERY TUESDAY NIGHT UNTIL 7 PM Send our Family-Size Fun: 2019 Mazda CX-9 coupons Signature Review directly to your mobile phone! If you’re looking for a ____________________ three-row crossover Schwartz Mazda that isn’t just a Service Specials! wannabe minivan, then the 2019 Mazda CX-9 should be at the top of your list; the same holds true for any of Mazda’s ________________________________ current crossovers. As fun as the CX-3 __________________ and CX-5 are, though, the CX-9 is fun Heritage, Experience = Dealership Homepage on a family scale, and the 2019 Mazda Schwartz Mazda New Vehicles CX-9 gets even better with a quieter, Experience 100 Years of Pre-Owned Vehicles refined interior and a retuned Schwartz Mazda History on Specials suspension. Like all other Mazda YouTube Parts vehicles, the 2019 Mazda CX-9 comes _____________________________ Service in Sport, Touring and Grand Touring MAZDA TO PARTNER WITH Lease & Finance trim levels. And the Signature trim is the TOYOTA FINANCIAL SERVICES Truck Center luxury model. Mazda has been using JPMorgan Chase About Us as its financial arm under the Mazda Hours & Directions Mazda designers have done an Capital Services name for the past Contact Us excellent job creating a brand image – decade. But __________________ called KODO, Soul of Motion – that starting April 1, CONTENTS surpasses vehicle size with lines and 2020, Mazda Motor proportions that look good on of America Inc. will • 2019 Mazda CX-9 everything from the smallest CX-3 to be switching to this family-sized CX-9.
    [Show full text]
  • CVJ : CONSTANT VELOCITY JOINTS #SECURITYINSIDE with You
    CVJ : CONSTANT VELOCITY JOINTS #SECURITYINSIDE With You CHOOSING NTN-SNR PRODUCTS, YOU WILL HAVE: OE quality products tested and approved by our OE customers Repair kits ready to set up, manufactured inside our plants A range covering the mains brands on the European car park A digital service DID YOU KNOW IT? NTN Corporation is the 2nd worldwide OE supplier in the CV Joint market. NTN-SNR produces 40 million of CV Joints per year thanks to their 5 R&D centers and 15 production plants dedicated to CVJ products over the world: Asia, Europe, South America and United States of America. DO YOU KNOW OUR PART NUMBERS? • Driveshaft kits – DK part numbers (Driveshaft Kits) • Wheel side joint kits – OJK part numbers (Outboard Joint Kits) • Wheel side boot kits – OBK part numbers (Outboard Boot Kits) • Gearbox side boot kits – IBK part numbers (Inboard Boot Kits) THE NTN-SNR AFTERMARKET OFFER With his strong position in OE market, NTN-SNR offers today 473 parts numbers in Aftermarket divided in 4 kind of kits to answer the mechanics needs: - 275 driveshaft kits - 77 outboard joint kits - 59 outboard boot kits - 62 inboard boot kits RANGE SPECIFICATION FIRST TO THE MARKET OE manufacturer, we regularly offer new products to our customers for the latest vehicles hitting the market where there isn’t any competition yet. NTN is a precursor and the first to the market on many parts numbers in the Independent Aftermarket. CAR PARK COVERAGE NTN-SNR offer a wide range for all vehicles in Europe. French cars: Renault (new model of Clio, Megane and Laguna), Dacia (Duster), Peugeot (5008, 3008, Expert), Citroën (DS3, DS4, Jumpy).
    [Show full text]
  • 読む Notice of the 89Th Annual General Meeting of Shareholders
    Note: This document has been translated from a part of the Japanese original for reference purposes only. In the event of any discrepancy between this translated document and the Japanese original, the original shall prevail. The Company assumes no responsibility for this translation or for direct, indirect or any other forms of damages arising from the translation. (Stock Exchange Code 5631) June 1, 2015 To Shareholders with Voting Rights: Ikuo Sato Representative Director & President The Japan Steel Works, Ltd. 11-1, Osaki 1-chome, Shinagawa-ku, Tokyo, Japan NOTICE OF THE 89TH ANNUAL GENERAL MEETING OF SHAREHOLDERS Dear Shareholders: We would like to express our appreciation for your continued support and patronage. You are cordially invited to attend the 89th Annual General Meeting of Shareholders of The Japan Steel Works, Ltd. (the “Company”). The meeting will be held for the purposes as described below. If you are unable to attend the meeting, you can exercise your voting rights in writing or via the Internet. Please review the attached Reference Documents for the General Meeting of Shareholders and exercise your voting rights by 5:00 p.m. on Tuesday, June 23, 2015, Japan time. If exercising your voting rights in writing, indicate your vote for or against the proposal on the enclosed Voting Rights Exercise Form and return it so that it is received by the above-mentioned deadline. If exercising your voting rights via the Internet, visit the Company’s Web site (http://www.web54.net) to exercise your voting rights, enter the voting rights exercise code and password that are indicated on the enclosed Voting Rights Exercise Form, follow the instructions on the screen and input your vote for or against each proposal by the above-mentioned deadline.
    [Show full text]
  • The 21Th Japan-Turkey Joint Economic Committee Meeting List of Japanese Participants (Tokyo / October 4, 2013)
    The 21th Japan-Turkey Joint Economic Committee Meeting List of Japanese Participants (Tokyo / October 4, 2013) As of Sep 9, 2013 Kazuyuki KAMA Chairman Japan-Turkey Economic Committee Keidanren Chairman of the Board IHI Corporation Hiroshi HORIGUCHI General Manager, Global Marketing Department, Global Marketing Headquarters IHI Corporation Toshihiko KITANO Executive Officer Director, International Division HAZAMA ANDO CORPORATION Harutoshi OKITA Executive Officer & C.O.O Plant Project, Marine & Aerospace Div. ITOCHU Corporation Akinori MATSUI General Manager Administration Department EBARA CORPORATION ※Takaji MINEO Senior Executive Officer General Manager, International Division KAJIMA CORPORATION Masato TAKEUCHI Group Leader Business Development Group Construction Department International Division KAJIMA CORPORATION Masaaki ISHIJIMA Manager Department2 Overseas Strategic2 KAWASAKI HEAVY INDUSTRIES, LTD. Mieko WANIBUCHI President GINZA TAILOR GROUP CO., LTD. Koichi YAZIMA Managing Director Global Head of Energy, Natural Resources and Environment Finance Group JAPAN BANK FOR INTERNATIONAL COOPERATION Hisashi KOBAYASHI Director, Senior Executive Officer COSMO OIL COMPANY, LIMITED 1 Masao FUJITA Senior Executive Officer Komatsu Ltd. Shigeki TONOOKA Member of the Board Senior Managing Director JFE Engineering Corporation Kazuyuki TANAKA Senior Vice President JX Nippon Oil & Energy Corporation Koichiro HIGASHIDE Managing Officer Director, Corporate Planning Division SHIMIZU CORPORATION Takeshi HASEGAWA Deputy General Manager Business Development Department International Division SHIMIZU CORPORATION Koichiro EBIHARA Senior Staff Officer Mitsui O.S.K Lines, Ltd. Kozo OMAE General Manager Corporate Planning DIV. NIPPON STEEL & SUMITOMO METAL CORPORATION Tetsuo SHIMIZU General Manager International Business Development Dept. Sumitomo Rubber Industries, Ltd. Tsuyoshi NAGAE General Manager Strategic Business Research Department SUMITOMO FORESTRY CO., LTD. Hayao HORA Senior Executive Vice President ALL NIPPON AIRWAYS CO., LTD.
    [Show full text]
  • Mazda Toyota Manufacturing, USA, Inc
    March 9. 2018 (March 8, 2018 - CST) Mazda Motor Corporation Toyota Motor Corporation Mazda and Toyota Establish Joint-Venture Company “Mazda Toyota Manufacturing, U.S.A., Inc.” - Vehicle assembly plant with annual production capacity of 300,000 units will be built in Huntsville, Alabama. - Investment to reach $1.6 billion for facility that will employ up to 4,000, open in 2021 Huntsville, Alabama, U.S.A. (March 8, 2018) / Hiroshima and Toyota-city, Japan (March 9, 2018) – Mazda Motor Corporation and Toyota Motor Corporation have established their new joint- venture company “Mazda Toyota Manufacturing, U.S.A., Inc.” (MTMUS) that will produce vehicles in Huntsville, Alabama starting in 2021. The new plant will have the capacity to produce 150,000 units of Mazda’s crossover model that will be newly introduced to the North American market and 150,000 units of the Toyota Corolla. The facility is expected to create up to 4,000 jobs. Toyota and Mazda are investing $1.6 billion towards this project with equal funding contributions. “We hope to make MTMUS a plant that will hold a special place in the heart of the local community for many, many years,” said Mazda’s Executive Officer Masashi Aihara, who will serve as President of MTMUS. “By combining the best of our technologies and corporate cultures, Mazda and Toyota will not only produce high-quality cars but also create a plant employees will be proud to work at and contribute to the further development of the local economy and the automotive industry. We hope that cars made at the new plant will enrich the lives of their owners and become much more than just a means of transportation.” “The new plant, which will be Toyota’s 11th manufacturing facility in the U.S., not only represents our continuous commitment in this country, but also is a key factor in improving our competitiveness of manufacturing in the U.S.,” said Hironori Kagohashi, executive general manager of Toyota and MTMUS’s Executive Vice President.
    [Show full text]
  • Hydrogen and Fuel Cells in Japan
    HYDROGEN AND FUEL CELLS IN JAPAN JONATHAN ARIAS Tokyo, October 2019 EU-Japan Centre for Industrial Cooperation ABOUT THE AUTHOR Jonathan Arias is a Mining Engineer (Energy and Combustibles) with an Executive Master in Renewable Energies and a Master in Occupational Health and Safety Management. He has fourteen years of international work experience in the energy field, with several publications, and more than a year working in Japan as an energy consultant. He is passionate about renewable energies, energy transition technologies, electric and fuel cell vehicles, and sustainability. He also published a report about “Solar Energy, Energy Storage and Virtual Power Plants in Japan” that can be considered the first part of this document and is available in https://lnkd.in/ff8Fc3S. He can be reached on LinkedIn and at [email protected]. ABOUT THE EU-JAPAN CENTRE FOR INDUSTRIAL COOPERATION The EU-Japan Centre for Industrial Cooperation (http://www.eu-japan.eu/) is a unique venture between the European Commission and the Japanese Government. It is a non-profit organisation established as an affiliate of the Institute of International Studies and Training (https://www.iist.or.jp/en/). It aims at promoting all forms of industrial, trade and investment cooperation between the EU and Japan and at improving EU and Japanese companies’ competitiveness and cooperation by facilitating exchanges of experience and know-how between EU and Japanese businesses. (c) Iwatani Corporation kindly allowed the use of the image on the title page in this document. Table of Contents Table of Contents ......................................................................................................................... I List of Figures ............................................................................................................................ III List of Tables ..............................................................................................................................
    [Show full text]
  • If You Bought Or Leased a New Vehicle Or Bought Certain Replacement Parts for a Vehicle in the U.S
    If You Bought or Leased a New Vehicle or Bought Certain Replacement Parts for a Vehicle in the U.S. Since 1995 You Could Get Money From Settlements Totaling Approximately $1.04 Billion A Federal Court authorized this Notice. This is not a solicitation from a lawyer. • Please read this Notice and the Settlement Agreements available at www.AutoPartsClass.com carefully. Your legal rights may be affected whether you act or don’t act. This Notice is a summary, and it is not intended to, and does not, include all the specific details of each Settlement Agreement. To obtain more specific details concerning the Settlements, please read the Settlement Agreements. • Separate lawsuits claiming that Defendants in each lawsuit entered into unlawful agreements that artificially raised the prices of certain component parts of qualifying new vehicles (described in Question 8 below) have been settled with 56 Defendants and their affiliates (“Settling Defendants”). Previously, settlements with 23 of the Settling Defendants (“Round 1 Settlements” totaling approximately $225 million and “Round 2 Settlements” totaling approximately $379 million) received final Court approval. Now, additional settlements totaling approximately $432,823,040 have been reached with 33 Settling Defendants. These Settling Defendants are called the “Round 3 Settling Defendants,” and the settlements with them are called the “Round 3 Settlements.” This Notice will give you details of those proposed Round 3 Settlements and your rights in these lawsuits. • Generally, you are included in the Settlement Classes for the Round 3 Settlements if, at any time between 1995 and 2018, depending upon the component part, you: (1) bought or leased a qualifying new vehicle in the U.S.
    [Show full text]
  • Notice of Convocation of the 202Nd Ordinary General Meeting of Shareholders
    (Translation) Securities Code: 7013 May 29, 2019 To: Shareholders IHI Corporation Tsugio Mitsuoka, President & CEO 1-1, Toyosu 3-chome, Koto-ku, Tokyo NOTICE OF CONVOCATION OF THE 202ND ORDINARY GENERAL MEETING OF SHAREHOLDERS You are cordially invited to attend the 202nd Ordinary General Meeting of Shareholders of IHI Corporation (the “Company”). The meeting shall be held as followings. 1. Date and Time: June 20, 2019 (Thursday), 10:00 a.m. (The reception of the attendees to the meeting shall start at 8:45 a.m.) 2. Place: The “Hiten” main banquet hall, Grand Prince Hotel New Takanawa 13-1, Takanawa 3-chome, Minato-ku, Tokyo 3. Purposes Matters to be reported: 1. Report on the business report and the consolidated financial statements for the 202nd fiscal year (from April 1, 2018 to March 31, 2019), and the results of the audit of the consolidated financial statements by the accounting auditor and the Audit & Supervisory Board 2. Report on the non-consolidated financial statements for the 202nd fiscal year (from April 1, 2018 to March 31, 2019) Matters to be resolved: Agenda Item No. 1: Allotment of dividend of surplus Agenda Item No. 2: Election of eleven (11) directors Agenda Item No. 3: Election of one (1) audit & supervisory board member - 1 - 4. Exercise of Voting Rights by Shareholders Unable to Attend the Meeting If unable to attend the meeting on the day, voting rights can be exercised by voting form (i.e., “Form for Exercising Voting Right”) or via the Internet, etc. Please review the Reference Material for the General Meeting of Shareholders (page 5 to page 34) in this document and exercise your voting rights using one of the methods described on the following page.
    [Show full text]