DOCSLIB.ORG

Twist-A-Nut™ Screwdrivers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Twist-A-Nut™ Screwdrivers Twist-a-Nut ™ Screwdrivers n Top quality screwdrivers designed especially for the professional electrician n Patented wire connector wrench in handle helps install twist-on connectors n Patent pending Accu-Loop™ wire looping holes in handle n Tough Chrome-Vanadium shanks n Precision, machined tips for accurate fit 21-in-1 Twist-a-Nut™ Screwdriver 21-in-1 Twist-a-Nut ™ Screwdriver Patented Wire-Nut® Wire Connector Wrench n Wire-Nut® Wire Connector Wrench reduces accepts a wide variety of connectors. finger fatigue and gets in tight spots n Premium screwdriver ratchet mechanism can handle high torque without failure n Ergonomic, slip resistant comfort grip B-Cap® Wing-Nut® Wire-Nut® Twister® Heavy-duty chrome vanadium shafts provide robust strength and long life for professional use Textured grip provides excellent torque and resists perspiration, water, oil and chemicals PREMIUM RATCHET HIGH TORQUE Multiple Bit Storage Unit Six torsion bars provide All-Metal Ratchet exceptional grip • Pro-quality, 28 tooth double action, twin-tooth ratchet • 225 lbs. of torque (stronger than human wrist can torque) Heavy duty Chrome- 35-688 Vanadium fixed shaft Accu-Loop™ Wire Looping Hole Precision tips for accurate fit #1 PHILLIPS 3/160 SLOTTED #1 SQUARE #2 PHILLIPS 1/40 SLOTTED #2 SQUARE #3 PHILLIPS 5/160 SLOTTED #15 STAR 3/320 HEX 1/40 NUTDRIVER #20 STAR 1/80 HEX 5/160 NUTDRIVER #25 STAR 3/160 HEX 7/160 NUTDRIVER #30 STAR 5/320HEX 9-in-1 Ratch-a-Nut ™ Screwdriver Patented Wire-Nut® Wire Connector Wrench ® accepts a wide variety of connectors. Ratcheting Wire-Nut n Ratcheting Wire-Nut® Wire Connector Wrench Wire Connector Wrench prevents finger fatigue and gets in tight spots • Prevents finger fatigue and n Premium screwdriver ratchet mechanism can gets in tight spots handle high torque without failure • Accepts a wide variety of n Ergonomic, slip resistant comfort grip B-Cap® Wing-Nut® Wire-Nut® Twister® IDEAL wire connectors Textured grip provides excellent torque and resists perspiration, water, oil and chemicals Six torsion bars provide exceptional grip RATCHETS AT BOTH ENDS Heavy duty 35-988 Chrome- Accu-Loop™ Wire Vanadium Looping Hole fixed shaft All-Metal Ratchet • Pro-quality, 28 tooth double Precision tips action, twin-tooth ratchet for accurate fit • 225 lbs. of torque (stronger than human wrist can torque) #1 PHILLIPS 3/16” SLOTTED #2 PHILLIPS 1/4” SLOTTED 1/4” NUTDRIVER 5/16” NUTDRIVER 7/16” NUTDRIVER Innovation by IDEAL, The Brand Electricians Trust. 7-in-1 Twist-a-Nut ™ Screwdriver Patented Wire-Nut® Wire Connector Wrench ® accepts a wide variety Wire-Nut of connectors. Wire Connector B-Cap® Wing-Nut® Wire-Nut® Twister® Wrench Universal connector wrench in handle helps install Textured grip provides twist-on wire connectors excellent torque and resists perspiration, water, oil and chemicals ™ Six torsion Accu-Loop bars provide Wire-looping hole in handle exceptional grip Twist-a-Nut™ Screwdriver Handle Interchangeable with new Heavy duty Chrome- conduit deburrer head and Vanadium 6-in-1 Tap Tool fixed shaft 30-908 / 30-909 Chrome Vanadium Accu-Loop™ Wire Steel Shaft Looping Hole Heavy duty chrome vanadium steel shaft Precision tips for accurate fit 30-908 30-909 1/40 Nutdriver 1/40 Nutdriver 1/40 Slotted 1/40 Slotted 3/160 3/160 Slotted Slotted #1 Phillips #2 Phillips #2 Square 5/160 Nutdriver 5/160 Nutdriver #1 Square Twist-a-Nut ™ Pro Screwdrivers Wire-Nut® Wire Connector 30-330 30-331 30-332 30-333 Wrench #2 Square x 60 1/40 Slotted x 40 #2 Phillips x 40 1/40 Cabinet x 60 Universal connector wrench in handle helps install twist-on wire connectors Accu-Loop™ Wire n Convenient Wire-Nut® Wire Connector Wrench Looping Hole in end of handle n Wire-looping hole in handle n Tough, chrome vanadium steel shank n Precision ground tip provides secure fit in screw slot Textured grip provides excellent torque and resists perspiration, water, oil and chemicals Innovation by IDEAL, The Brand Electricians Trust. 6-in-1 Twist-a-Nut ™ Tapping Tool Taps: 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20 n Forms new threads, re-forms burred threads and Textured grip provides cleans out obstructions excellent torque and resists perspiration, n Reversible, high-carbon tap with three clearly water, marked thread sizes on each end oil and chemicals Six torsion n Handle is interchangeable with 7-in-1 Screwdriver bars provide (35-908) and Conduit Deburrer (35-083) exceptional grip Complete Tool with Taps 30-922 Replacement Collar & Taps Wire-Nut™ Wire 30-923 Connector Wrench Universal connector wrench in handle helps install twist-on wire connectors Patented Wire Connector Wrench accepts a wide B-Cap® Wing-Nut® Wire-Nut® Twister® variety of connectors. Accu-Loop™ Wire Looping Hole Triple-Tap Tool Taps: 6-32, 8-32, 10-32 35-412 n Forms new threads, re-forms burred threads and cleans out obstructions n Reversible, high-carbon tap with three clearly marked thread sizes on each end n Handle is interchangeable with 7-in-1 Screwdriver (35-908) and Conduit Deburrer (35-083) n Universal connector wrench in handle helps installs twist-on wire connectors Twist-a-Nut ™ Conduit Deburring Tools n Deburrs inside and outside edges of 1/2 in., 3/4 in. and 1 in. EMT conduit n Hooded tip tightens EMT fitting set screws without slipping n Square tip “seats” much more quickly on fitting screws than slotted version n Head removes and is interchangeable with IDEAL 7-in-1 Twist-a-Nut™ Screwdriver shaft (#35-908) n Head can be used in drill or cordless 35-098 35-075 35-083 35-096 35-097 screwdriver at low RPM Conduit Deburrer Conduit Deburrer Conduit Deburrer Conduit Deburrer Replacement Blades ® Head Only #2 Square Tip Slotted Tip Head Only 2 Pack n Universal Wire-Nut Wire Connector Wrench #2 Square Tip Slotted Tip in handle Twist-a-Nut ™ Conduit Wiring Kit Wire-Nut™ Wire Connector Wrench Universal connector wrench in handle helps install twist-on wire connectors n Includes Twist-a-Nut™ Screwdriver (35-908), 35-926 Twist-a-Nut™ Deburring Head-Square Tip (35-098), Twist-a-Nut™ Tap Tool Shaft (35-923), Three Spare Bits (1/4 in. slotted & #2 square, 3/16 in. slotted & #1 square, #10 & #15 Torx®), 8-Pocket Carrying Pouch (35-927) n Nylon carrying pouch holds all three Twist-a-Nut™ tools plus room for four replacement bits or taps #1 PHILLIPS 3/160 SLOTTED #1 SQUARE #15 STAR #2 PHILLIPS 1/40 SLOTTED #2 SQUARE #20 STAR n Strong easy-slide metal belt clip CONDUIT DEBURRER 1/40 NUTDRIVER #2 SQUARE TIP 5/160 NUTDRIVER Innovation by IDEAL, The Brand Electricians Trust. Twist-a-Nut™ Screwdriver Product Line Standard Standard Standard Standard 7-in-1 7-in-1 9-in-1 21-in-1 6-in-1 Tap BurMaster™ BurMaster™ Triple-Tap Conduit Kit Item Number 30-330 30-331 30-332 30-333 35-908 35-909 35-988 35-688 35-922 35-075 35-083 35-412 35-926 Design Standard Standard Standard Standard Fixed Fixed 2 Ratchets 1 Ratchet Tap Tool Deburrer Deburrer Tap Tool Deburrer Screw Tips 1 Screw Tip 1 Screw Tip 1 Screw Tip 1 Screw Tip 4 Screw 4 Screw 4 Screw 15 Screw - 1 Screw 1 Screw - 1 Screw Nut Tips - - - - 2 Nut 2 Nut 3 Nut 3 Nut - - - - - Wire Connector Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench 1 Wrench Wire-Looping 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers 2 Loopers Phillips Tips #1 - - - - #1 Phillips - #1 Phillips #1 Phillips - - - - - #2 #2x40 Phillips - #2 Phillips - #2 Phillips #2 Phillips - - - - - #3 - - - - - - - #3 Phillips - - - - - Slotted Tips 3/160 - - - - 3/160 Slot. 3/160 Slotted 3/160 Slot. 3/160 Slot. - - - - 3/160 Slot. 1/40 - 1/4” Slot. x 40 - 1/4” Slot. x 60 1/40 Slot. 1/40 Slotted 1/40 Slot. 1/40 Slot. - - - - 1/40 Slot. 5/160 - - - - - - - 5/160 Slot. - - - - - Square Tips #1 - - - - - #1 Square - #1 Square - - - - #1 Square #2 #2 Sq. x 60 - - - - #2 Square - #2 Square - - - - #2 Square Star #15 - - - - - - - #15 Star - - - - - #20 - - - - - - - #20 Star - - - - - #25 - - - - - - - #25 Star - - - - - #30 - - - - - - - #30 Star - - - - - Hex Driver 3/320 - - - - - - - 3/320 Hex - - - - - 1/80 - - - - - - - 1/80 Hex - - - - - 3/160 - - - - - - - 3/160 Hex - - - - - 5/320 - - - - - - - 5/320 Hex - - - - - Nut Driver 1/40 - - - - 1/40 Nut 1/40 Nut 1/40 Nut 1/40 Nut - - - - - 5/160 - - - - 5/160 Nut 5/160 Nut 5/160 Nut 5/160 Nut - - - - - 7/160 - - - - - - 7/160 Nut 7/160 Nut - - - - - Deburrer Slotted - - - - - - - - - - Slot. Tip - Slot. Tip Square - - - - - - - - - Square Tip - - - Tap Tool 6-32 - - - - - - - - 6-32 - - 6-32 6-32 8-32 - - - - - - - - 8-32 - - 8-32 8-32 10-32 - - - - - - - - 10-32 - - 10-32 10-32 10-24 - - - - - - - - 10-24 - - - 10-24 12-24 - - - - - - - - 12-24 - - - 12-24 1/4-20 - - - - - - - - 1/4-20 - - - 1/4-20 IDEAL INDUSTRIES, INC. 1375 Park Avenue, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA International offices: Australia • Brazil • Canada • China • Germany • India • Mexico • UK Form No. P-5023 For complete sales office contact information, visit us at: 4/17 ©2017 IDEAL INDUSTRIES, INC. www.idealind.com Printed in U.S.A..
Load more

Recommended publications
  • HYTORC Tool Basics Description, Operation and Safety
    HYTORC Tool Basics Description, Operation and Safety November 10, 2017 BOSS Training Series Basic Operation and Safety Series Contents 1. Hydraulic Torque Tools 2. Pneumatic Torque Tools 3. Electric Torque Tools 5. Hydraulic Tensioners Hydraulic Torque Technology Pneumatic Torque Tool Overview Electric Torque Tool Overview Hydraulic Tensioner Technology Hydraulic Torque Tool Overview Pneumatic Tool Comparison Electric Tool Comparison Top Side Tensioners Hydraulic Tool Comparison JGUN SINGLE SPEED FLASH 2.0 Wind and Subsea Tensioners EDGE jGUN DUEL SPEED LITHIUM SERIES Gun Tensioner Pumps VERSA FRL LION GUN Tensioner Accessories MXT Digital jGUN XLCT L – Lithium Battery Gun T - Hydraulic Tensioning ICE J - jGUN Tool Operating Operating Procedures Operating Procedures AVANTI Procedures STEALTH DJ – Digital jGUN Operating HY-115/230 Procedures HY-Air 4. HYTORC Fasteners Vector 6. Safety HYTORC Washer Additional Hydraulic Pumps Bolting Safety Moment HYTORC Nut H - Hydraulic Torque Tool HW - HYTORC Washer Install Operating Procedures Procedure HN – HYTORC Nut Install Procedure 1. Hydraulic Torque Tools BOSS Training Series Basic Operation and Safety Series Hydraulic Torque Tool Technology PUSH – ADVANCE – CLICK – RELEASE – Tool Drive Turns 24 degrees PUSH Pushing the advance button on the remote PUSH switches a solenoid valve on the pump and directs hydraulic fluid pressure into the advance side of the tool cylinder. ADVANCE ADVANCE Piston in the tool cylinder advances to turn the ratchet 24 degrees/click. (some tool ratchets are different, the STEALTH turns 18 degrees/click) CLICK CLICK Ratchet locks in place against a pawl with a distinct clicking sound. RELEASE - RETRACT Releasing the advance button causes the RELEASE solenoid valve to direct pressure in the release port to retract the piston.
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • How to Use Tools / Mistakes to Avoid CARLTSOE SAFETY TOOLS
    CARLTSOE SAFETY TOOLS If you just had the right tools How to Use Tools / Mistakes to Avoid Tool Proper Uses Abuse/Misuse Nail Hammers Nail hammers are intended for driving and pulling common, Never strike one hanmmer with or against another hammer unhardened nails only, and for ripping apart wooden or a hatchet. Never strike nail pullers, steel chisels or structures. They may be used to strike nail sets with the other hardened objects with a nail hammer as the face may center of the striking face. chip, possibly resulting in eye or other serious injury. Ball Pein Hammers Ball pein hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and Strike squarely and avoid glancing blows that may cause straightening unhardened metal. the edge of the face to chip, possibly resulting in eye or When striking a struck tool (chisel or punch), the striking face other serious injury. Never strike with or against the side, of the hammer should have a diameter at least 3/8" larger or cheek, of any hammer. than the struck face of the tool. Riveting and Setting Hammers The Riveting hammer is designed for driving and spreading Never use these special-purpose hammers for general- rivets on sheet metal work. The Setting hammer is designed purpose work. The square, sharp edges of the setting for forming sharp corners, closing and peining seams and lock hammer make it vulnerable to chipping if improperly used. edges, and for use by glaziers for inserting glazier points. Never strike against other steel tools.
    [Show full text]
  • United Rentals Tool Solutions Catalog
    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
    [Show full text]
  • Screwdrivers, Nut Drivers & Accessories
    F Screwdrivers, o r Nut Drivers & P r Accessories o Nut Screwdrivers, Drivers f Offering a variety of tip types, hex sizes, shaft lengths, and handle e designs, Klein has the screwdrivers s and nut drivers professionals demand s to get the job done with comfort and i ease of use. & Accessories o n a l s . S i n c e 1 8 5 7 ® Introduction – Screwdrivers, Nut Drivers & Accessories Klein screwdrivers give professionals extra-quality features that have made the Klein name famous for hand tools–features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability. All Klein drivers are made of the highest quality tempered steel, carefully heat-treated for maximum strength. Shafts have integral flanges that provide an extra-strong, torque-proof anchor in the handle. Strong, durable black tips are forged and precision ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action. Cushion-Grip screwdrivers feature super-comfortable, sure- grip handles on top-quality blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and MIL specifications. Keystone Cabinet Phillips Square TORX® Recess Using screwdrivers The size of the screw and the type of opening it has determines 4. Never use a driver at an angle to the screw. Always which driver to use. But there are a few tips on how to use a keep the shank perpendicular to the screw head. Driving driver that can be of benefit, because screwdrivers are the at an angle or using a point that is too small can spoil the most often misused and abused hand tools of all.
    [Show full text]
  • Tools for Tile & Stone Catalog
    TOOLS FOR TILE & STONE CONTRACTORS CUTTING, PROFILING & POLISHING TH Since 1986 Celebrating 35 Years Providing Better Solutions to the Professional VERSION 6 CONTACT US WELCOME Alpha Professional Tools® was founded in 1986 and has become a leading manufacturer of quality tools for professionals in the natural/engineered stone, porcelain, ceramic, glass, construction, marine and automotive industries. Alpha® provides the best products for cutting, drilling, shaping and polishing all types of materials. In addition to providing the best products in the industry, Alpha Professional Tools® offers a variety of services to support their products. Company Contact Information: Headquarters & 16 Park Drive Training Center: Franklin, NJ 07416 Hours of Operation (EST): 8:30 a.m. - 5:00 p.m. Telephone No: 201-337-3343 Toll-Free No: 800-648-7229 Fax No: 201-337-2216 Toll Free Fax No: 800-286-0114 E-mail Orders to: Contact Us: [email protected] www.alpha-tools.com [email protected] [email protected] Follow Us: Sales Contacts by Territory – [email protected] Caribbean 201-337-3343 Ohio Valley 440-364-3759 Canada 519-546-9861 Pacific 800-648-7229 International 201-337-3343 South 480-848-6808 Midwest 630-849-7105 Southeast 678-977-1147 Northeast 973-830-7681 Southern CA 925-428-1292 Northern CA 925-428-1292 TABLE OF CONTENTS TOOLS STONE CUTTER • ESC-125, Wet Stone Cutter .......................................................................................2 • Countertop Trim Kit ....................................................................................................4
    [Show full text]
  • BOLTING TECHNOLOGY Industrial Products Gmbh
    BOLTING TECHNOLOGY www.cmco.eu Industrial Products GmbH The brands Pfaff-silberblau – the name of this company with its long- standing tradition and history of more than 140 years has become the synonym for power, dynamics and safety. Hoists, material handling equipment as well as rope winches and rack and pinion jacks of the Pfaff-silberblau brand are used wherever high loads need to be lifted, turned or moved in an environment with demanding safety requirements. In logistics, industrial produc- tion or outdoor Yale is the leading brand for standard manual hoisting applications, the equipment in Europe. As early as 1877, Yale produced innovative products the first spur-geared hand chain hoist incorporating and application- the Weston screw-and-disc type load brake – a design specific designs principle which is still used today. In 1936, hoist manu- with their unique facture started in Velbert with the production of the world silver blue finish renowned PUL-LIFT®. provide the solution The product range as well as all new and further develop- to numerous lifting ments of Yale in the individual product sectors constantly applications. raise the benchmark for quality, reliability and safety. The comprehensive range of products includes hoists, cranes, load hoisting tackles and crane weighers, balancers, textile lifting and lashing equipment and personal protection equipment, material handling equipment and load moving systems, hydraulic tools, bolting technology as well as workshop equipment. The prominently yellow products, which are delivered ready for operation, are used world-wide for the most varied industrial and commercial applications. 2 The company Industrial Products GmbH Yale has already been a successful partner within the international corporate network of Columbus McKinnon Corporation (CMCO) for more than ten years.
    [Show full text]
  • 11 Piece STANLEY® FATMAX® Screwdriver SET 6 Piece
    STANLEY® FATMAX® SCREWDRIVERS S ■ Ergonomically designed quad-lobe handle provides more torque than traditional-style screwdrivers for less effort. C ■ High strength polypropylene handle has textured rubber grip for comfort. REWDRIVER ■ Magnetic tips help secure grip on fasteners. ■ Color-coded handles for easy tip identification. ■ Chrome plated bars resist corrosion. ■ Bars are fully ground and polished. ■ Bars are made of alloy steel and heat treated for strength and durability. S ■ Shot blasted black oxide tips provide a more precise fit and a textured surface, which provides increased grip and less cam-out when in use. 6 PIECE STANLEY® FATMAX® DIAMOND SCREWDRIVER SET Product #: FMHT62052 ■ Industrial Grade Simulated Diamond Tip Technology: Industrial Grade Simulated Diamond deposited on to screwdriver tips helps bite into screw, helping to extend tip life. ■ Longer tip life when compared to traditional STANLEY® screwdrivers. ■ Black phosphate bars provide corrosion resistance. ■ Ergonomic quad-lobe design provides maximum tip torque. ■ Color-coded handles makes choosing the right driver quick and easy. Pieces Description 6 (1) Slotted Cabinet: 3/16 x 4” (2) Flared Slotted: 1/4 x 4, 5/16 x 6” (3) Phillips: 1 x 3, 2 x 4, 3 x 6” 11 PIECE STANLEY® FATMAX® SCREWDRIVER SET Product #: 62-502 Contents Description 62-552 Screwdriver, FATMAX® Standard Slotted Stubby 1/4" x 1-3/4" 62-553 Screwdriver, FATMAX® Standard Slotted 1/4" x 4" 62-555 Screwdriver, FATMAX® Standard Slotted 5/16" x 6" 62-551 Screwdriver, FATMAX® Standard Slotted Precision Pocket 1/8" x 3" 62-554 Screwdriver, FATMAX® Cabinet Slotted 3/16" x 3" 62-556 Screwdriver, FATMAX® Phillips Precision Pocket # 0 x 2-1/4" 62-560 Screwdriver, FATMAX® Phillips Stubby # 2 x 1-3/4" 62-559 Screwdriver, FATMAX® Phillips # 1 x 3" 62-561 Screwdriver, FATMAX® Phillips # 2 x 4" 62-562 Screwdriver, FATMAX® Phillips # 3 x 6" Torx® is a trademark of Acument Intellectual Properties, LLC WARNING: WORK SAFELY WITH TOOLS.
    [Show full text]
  • PIP-Safety-Products-Catalog-2015-Composite-And-Insulated-Tools.Pdf
    BRINGING THE BEST OF THE WORLD TO YOU® ELECTRICAL SAFETY TOOLS 228 COMPOSITE TOOLS COMPOSITE TOOLS INSULATED TOOLS 229 INSULATED TOOLS Manufactured from braided, military-grade fiberglass composite PIP’s line of insulated tools meet the ASTM F 1505 standard over a tough polymer core, composite tools combine the latest and are rated for use up to 1000 volts. Many styles are made in 232 ELECTRICIAN’S TOOL KIT in space-age materials technology with traditional heat steel the USA, and feature the trusted Channellock® brand name. tips in a unique family of products ideal for the safety-minded professional. CUSHION GRIP LIGHTWEIGHT FIBERGLASS COMPOSITE SHAFT (NON-CONDUCTIVE) HEAT TREATED STEAL TIP COMPOSITE & INSULATED TOOLS 800-262-5755 / www.pipusa.com 227 COMPOSITE TOOLS DRIVERS OR CHOOSE FROM PICK A BIT SIZE THAT BEST ASSORTED SHAFT LENGTHS SUITS YOUR NEEDS WITH A BUILT IN BIT COMPOSITE MALE COMPOSITE NUT COMPOSITE SLOTTED COMPOSITE PHILLIPS HEXAGON DRIVERS DRIVERS SCREWDRIVERS SCREWDRIVERS ITEM NUMBER LENGTH BIT ITEM NUMBER LENGTH BIT ITEM NUMBER LENGTH BIT ITEM NUMBER LENGTH BIT 9500-00620 3" 5/32" 9500-00880 3" 3/16" 9500-00813 3" 1/8" 9500-00851 3" #0 9500-00621 3" 3/16" 9500-00881 3" 7/32" 9500-00814 6" 1/8" 9500-00852 5" #1 9500-00622 3" 7/32" 9500-00882 3" 1/4" 9500-00820 7" 1/4" 9500-00853 6" #0 9500-00623 3" 1/4" 9500-00883 3" 9/32" 9500-00822 4½" 5/16" 9500-00856 4½" #2 9500-00625 3" 5/16" 9500-00884 3" 5/16" 9500-00823 7" 5/16" 9500-00857 6" #2 9500-00627 3" 3/8" 9500-00885 3" 11/32" 9500-00843 7" 3/16" 9500-00858 7" #2 9500-00640
    [Show full text]
  • Complete Screwdriver and Nut Driver Program
    2019 PROFESSIONAL SCREWDRIVERS & NUT DRIVERS COMPLETE SCREWDRIVER AND NUT DRIVER PROGRAM Slotted • Phillips • TORX® • Security TORX® • Hex Inch/Metric • Ball End Hex MagicRing Hex • Security Hex • Nut Drivers • Pozidriv® • Square • Tri-Wing TORXPlus® • Pentalobe • Terminal Xeno Slotted/Phillips & Phillips/Pozidriv® Toll Free: (800) 494-6104 2 Wiha SoftFinish® CushionGrip Screwdrivers Wiha Powerhandle Screwdrivers Description Page Description Page ® SoftFinish Slotted/Phillips Drivers 4-7 Powerhandle Torx® Drivers 21 Stubby Slotted/Phillips Drivers 7 SoftFinish® Square Drivers 7 SoftFinish® Pozidriv® Drivers 8 Wiha Proturn Screwdrivers SoftFinish® Spanner Drivers 8 Description Page Torx®/TR Torx® Screwdrivers 9-10 Proturn Torx® Drivers 21 SoftFinish® TorxPlus® Drivers 11 SoftFinish® MagicSpring Drivers 9 SoftFinish® MagicRing Drivers 12-13 Measuring Scale Screwdrivers 8 Wiha Square Handle Screwdrivers Description Page Wiha 3K Series Screwdrivers Slotted & Phillips Drivers 22 Description Page 3K Series Slotted/Phillips 15 3K Series Torx Drivers 14 Wiha Offset Screwdrivers 3K Series Pozidriv® Drivers 15 Description Page 3K Series Bit Holders 14 3K Series Hex Inch & Metric 16 Slotted & Phillips Offset Drivers 22 TORX Offset Screwdrivers 22 Wiha Drive-Loc VI Tools Description Page Drive-Loc VI Handles 17 Wiha Power Blades & Sets Drive-Loc VI Blades 17-19 Description Page CentroFix Blade Holder 23, 39 Wiha Drive-Loc VI Sets 90mm Power Blades 23-24 Description Page Power Blade Sets 24 Drive-Loc VI Blade Sets 18-19 Power Blade Nut Drivers 39-40
    [Show full text]
  • Pyro-Bloc® M Module Design and Installation Guidelines
    16518 Pyro-Bloc Module Manual v3_Layout 1 6/21/2016 4:25 PM Page 2 Pyro-Bloc® M Module Design and installation guidelines THERMAL CERAMICS 16518 Pyro-Bloc Module Manual v3_Layout 1 6/21/2016 4:25 PM Page 3 Table of contents 1 Overview of the Pyro-Bloc® Module Pyro-Bloc Module history and Pyro-Log™ base............................................................. 03 Pyro-Bloc Module composition and hardware overview................................................04 Pyro-Bloc M-Module at a glance......................................................................................06 Pyro-Bloc velocity.............................................................................................................07 2 Guidelines for Installing Pyro-Bloc M Module Lining consideration..........................................................................................................09 Site preparation ................................................................................................................10 Installation Equipment ......................................................................................................11 Welding process, inspection and test........................................................................12 - 13 Installation steps of Pyro-Bloc M Module.................................................................14 - 15 3 Installing the Pyro-Bloc M Corner Module Installation steps for Pyro-Bloc Corner Module using T-Bar hardware...................16 - 17 4 Typical Pyro-Bloc M Module designs..................................................................18
    [Show full text]