Arxiv:1912.11467V5 [Hep-Ph] 2 Apr 2021 We Derive Bounds on the Power Absorbed by Axion Magnetic field

Total Page:16

File Type:pdf, Size:1020Kb

Arxiv:1912.11467V5 [Hep-Ph] 2 Apr 2021 We Derive Bounds on the Power Absorbed by Axion Magnetic field Parametrics of electromagnetic searches for axion dark matter Robert Lasenby∗ Stanford Institute for Theoretical Physics, Stanford University, Stanford, CA 94305, USA (Dated: April 6, 2021) Light axion-like particles occur in many theories of beyond-Standard-Model physics, and may make up some or all of the universe's dark matter. One of the ways they can couple to the Standard µν Model is through the electromagnetic Fµν F~ portal, and there is a broad experimental program, covering many decades in mass range, aiming to search for axion dark matter via this coupling. In this paper, we derive limits on the absorbed power, and coupling sensitivity, for a broad class of such searches. We find that standard techniques, such as resonant cavities and dielectric haloscopes, can achieve O(1)-optimal axion-mass-averaged signal powers, for given volume and magnetic field. For low-mass (frequency GHz) axions, experiments using static background magnetic fields generally have suppressed sensitivity | we discuss the physics of this limitation, and propose experimental methods to avoid it, such as microwave up-conversion experiments. We also comment on the detec- tion of other forms of dark matter, including dark photons, as well as the detection of relativistic hidden sector particles. I. INTRODUCTION have suppressed sensitivity (compared to their scaling at higher frequencies), and point out that this suppres- Axion-like particles, in particular the QCD axion, are sion can be alleviated in a number of ways, potentially a well-motivated dark matter (DM) candidate. They oc- motivating new experimental concepts. In particular, cur in many models of beyond-Standard-Model physics, we point out that `up-conversion' experiments, using a and can naturally be light and weakly-coupled, allowing magnetic field oscillating at microwave frequencies, can them to be stable and difficult-to-detect. There are also a have parametrically better scaling for small axion masses, number of early-universe production mechanisms, which and discuss the experimental details in a companion pa- can produce them in the correct abundance to be the per [14]. DM [1{8]. Similar sensitivity analyses can be applied directly to A wide range of existing and proposed experiments other forms of DM that couple to the SM photon, e.g. aim to detect axion DM candidates. These span many dark photon DM with a kinetic mixing. Analogous ideas decades of mass range, and target a variety of possible can also be applied to other kinds of DM-SM couplings, couplings to the Standard Model (SM) [9]. In this pa- and beyond that, to the detection of general hidden- µν sector states. We comment on some of these extensions per, we will focus on the aFµν F~ axion-photon-photon coupling, and address the sensitivity limits on such exper- later in the paper, and in the conclusions. iments | how small a DM-SM coupling could we possi- bly detect, given the dimensions, timescales, sensors etc. µν available? We choose the aFµν F~ coupling partly be- A. Summary of results cause, for a generic QCD axion, this coupling must lie within a fairly narrow (logarithmic) range [4, 10]; it is also Here, we give a brief summary of our main results. a generic feature of many other axion-like-particle mod- Suppose that dark matter consists of an axion-like parti- els [11]. In addition, it represents a particularly easily- 1 ~µν cle a of mass ma, with a coupling L ⊃ − 4 gaγγ aFµν F analysed example of the kind of sensitivity limits we are to the SM. For non-relativistic axion DM, this acts as (a) interested in. an `effective current' J ' gaγγ aB_ , where B is the arXiv:1912.11467v5 [hep-ph] 2 Apr 2021 We derive bounds on the power absorbed by axion magnetic field. Suppose that we have some laboratory DM experiments, under fairly general assumptions, in system with which we will try to detect the axion DM. terms of the magnetic field energy maintained inside the If we want to search for axions over a mass range ∆m, experimental volume. We also derive related limits on then for gaγγ small enough that the target system is in the achievable sensitivity for such experiments, using the the linear response regime, the expected time-averaged tools of quantum measurement theory. These analyses absorbed power from the axion effective current, at the are analogous to those developed in the gravitational least favourable axion mass, satisfies (under assumptions wave detection literature (see e.g. [12, 13] and references that we will discuss) therein). 2 For low-mass (frequency GHz) axions, we re- g ρaU B P¯ ≤ π aγγ (1) view why static-background-field experiments generally ∆m where ρa is the energy density of the axion DM, and U B is the time-averaged magnetic field energy in the exper- ∗ [email protected] imental volume (ignoring magnetic fields on very small 2 spatial scales). Here, the expectation value includes in- at ∼ GHz frequencies in superconducting (SRF) cavi- tegrating over the unknown phases of the axion signal ties [29, 30]. (otherwise, there could be O(gaγγ ) components of the These field strengths were noted in [31], which pro- absorbed power). This bound applies to target systems posed a SRF up-conversion experiment.1 However, they for which the imaginary part of the response function is mainly considered νa ∼ GHz, for which static field ex- non-negative at positive frequencies | that is, the sys- periments do not encounter the quasi-static suppression. tem on average absorbs energy from the axion forcing, Consequently, the only benefit of an SRF experiment rather than emitting. As we discuss below, P¯ is, in many would be the higher cavity quality factor, which is un- circumstances, closely related to the detectability of an likely to overcome the disadvantages of smaller back- axion signal. The P¯ / 1=∆m behaviour corresponds to ground magnetic field, higher temperature (due to cool- the power vs bandwidth tradeoff that is a property of ing power requirements), and drive-related noise issues. many detection schemes; covering a broader axion mass However, as we point out here, for νa GHz, the lack range in the same integration time necessarily leads to of quasi-static suppression may make up-conversion more lower average signal power. competitive. We investigate this possibility in more de- In the νa & GHz regime (where νa = ma=(2π) is the tail in a companion paper [14] (see also [34]). frequency of the axion oscillation), cavity haloscopes (as initially proposed in [15]) such as ADMX [16, 17] and HAYSTAC [18, 19] can attain the bound in equation 1 1. Detectability to O(1). At higher frequencies (νa & 10 GHz), dielectric haloscope proposals [20, 21] can also achieve this, tak- ing the experimental volume to be that occupied by the In the above paragraphs, we discussed the average dielectric layers. power absorbed from the axion effective current. It is −1 obvious that, other things being equal, a higher absorbed However, for ma . L , where L is the length scale of the shielded experimental volume, the EM modes at power makes it easier to detect axion DM. However, in comparing different experiments, other things are often frequencies ∼ νa are naturally in the quasi-static regime. In that case, a static-background-field experiment has not equal, and more generally, it is useful to have quan- titative limits on how small a coupling can be detected. 2 By using quantum measurement techniques [35], we g ρaU B P¯ π aγγ (m L)2 (2) could in principle detect extremely small g , for a given . ∆m a aγγ U B. For example, by preparing a cavity mode in a large- number Fock state, we could Bose-enhance the absorp- This suppression affects low-frequency (νa GHz) axion DM detection proposals such as [22], ABRA- tion (and emission) of axions [36]. However, such tech- CADABRA [23], and DM Radio [24]. As discussed be- niques are often difficult to implement; in axion experi- low, the scaling of the detectability limit is similarly af- ments, the only similar measurement demonstrated so far is HAYSTAC's squeezed state receiver, which is planned fected, with the minimum detectable gaγγ increased by −1 to deliver a factor 2 scan rate improvement in the forth- ∼ (maL) . Our results agree parametrically with those of [24, 25], which analyse axion DM detection in the coming Phase II run [19]. quasi-static regime, using an inductive pickup and lin- To understand different signal detection techniques, we ear phase-invariant amplification. can consider splitting our laboratory system into a `tar- Even under the assumptions leading to equation 1, the get' part, which couples to the axion effective current, quasi-static suppression is not inevitable. To alleviate it and a separate `readout' part, which couples to the tar- for static background magnetic fields, we would need to get. One common technique used in readout schemes enhance the quantum fluctuations of the EM fields that is linear, phase-invariant amplification (in particular, it is employed by almost all existing and proposed axion couple to the axion effective current, at frequencies ∼ νa. One way to achieve this is for the field fluctuations to detection experiments at microwave frequencies and be- `borrow' energy from some other source, e.g. magnetisa- low). For different experimental setups, we can place tion energy in a material, or a circuit component with limits on the SNR obtained, in analogy to the absorbed negative differential resistance. The practicality of such power limit from equation 1. concepts requires further investigation. If a linear amplifier is employed in `op-amp' mode [35], The quasi-static suppression can also be alleviated by and is subject to the `Standard Quantum Limit' performing an `up-conversion' experiment, in which the (SQL) [37] (see appendix A), then the SNR obtained, av- background magnetic field is oscillating at a frequency eraged across a fractionally small axion mass range ∆m, −1 & L .
Recommended publications
  • Chips for Discovering the Higgs Boson and Other Particles at CERN: Present and Future
    Chips for discovering the Higgs boson and other particles at CERN: present and future W. Snoeys CERN PH-ESE-ME, Geneva, Switzerland [email protected] Abstract – Integrated circuits and devices revolutionized particle physics experiments, and have been essential in the recent discovery of the Higgs boson by the ATLAS and CMS experiments at the Large Hadron Collider at CERN [1,2]. Particles are accelerated and brought into collision at specific interaction points where detectors, giant cameras of about 40 m long by 20 m in diameter, take pictures of the collision products as they fly away from the collision point. These detectors contain millions of channels, often implemented as reverse biased silicon pin diode arrays covering areas of up to 200 m2 in the center of the experiment, generating a small (~1fC) electric charge upon particle traversals. Integrated circuits provide the readout, and accept collision rates of about 40 MHz with on-line selection of potentially interesting events before data storage. Important limitations are power consumption, radiation tolerance, data rates, and system issues like robustness, redundancy, channel-to-channel uniformity, timing distribution and safety. The already predominant role of Figure 1. Aerial view of CERN indicating the location of the 27 silicon devices and integrated circuits in these detectors km LHC ring with the position of the main experimental areas the is only expected to increase in the future. ring. The city of Geneva, its airport, the lake and Mont Blanc are visible © 2015 CERN. Keywords-particle detection; silicon pin diodes; charge sensitive readout II. MAIN CONSTRAINTS AND LIMITATIONS I.
    [Show full text]
  • Phonon Spectroscopy of the Electron-Hole-Liquid W
    PHONON SPECTROSCOPY OF THE ELECTRON-HOLE-LIQUID W. Dietsche, S. Kirch, J. Wolfe To cite this version: W. Dietsche, S. Kirch, J. Wolfe. PHONON SPECTROSCOPY OF THE ELECTRON- HOLE-LIQUID. Journal de Physique Colloques, 1981, 42 (C6), pp.C6-447-C6-449. 10.1051/jphyscol:19816129. jpa-00221192 HAL Id: jpa-00221192 https://hal.archives-ouvertes.fr/jpa-00221192 Submitted on 1 Jan 1981 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. JOURNAI, DE PHYSIQUE CoZZoque C6, suppZe'ment au nOl2, Tome 42, de'cembre 1981 page C6-447 PHONON SPECTROSCOPY OF THE ELECTRON-HOLE-LIQUID W. ~ietschejS.J. Kirch and J.P. Wolfe Physics Department and Materials Research ihboratory, University of IZZinois at Urbana-Champaign, Urbana, IL. 61 801, U. S. A. Abstract.-We have observed the 2kF cut-off in the phonon absorption of electron-hole droplets in Ge and measured the deformation potential. Photoexcited carriers in Ge at low temperatures condense into metallic drop- lets of electron-hole liquid (EHL).' These droplets provide a unique, tailorable system for studying the electron-phonon interaction in a Fermi liquid. The inter- 2 action of phonons with EHL was considered theoretically by Keldysh and has been studied experimentally using heat In contrast, we have employed mono- chromatic phonons5 to examine the frequency dependence of the absorption over the range of 150 - 500 GHz.
    [Show full text]
  • Ity in the Topological Weyl Semimetal Nbp
    Extremely large magnetoresistance and ultrahigh mobil- ity in the topological Weyl semimetal NbP Chandra Shekhar1, Ajaya K. Nayak1, Yan Sun1, Marcus Schmidt1, Michael Nicklas1, Inge Leermakers2, Uli Zeitler2, Yurii Skourski3, Jochen Wosnitza3, Zhongkai Liu4, Yulin Chen5, Walter Schnelle1, Horst Borrmann1, Yuri Grin1, Claudia Felser1, & Binghai Yan1;6 ∗ 1Max Planck Institute for Chemical Physics of Solids, 01187 Dresden, Germany 2High Field Magnet Laboratory (HFML-EMFL), Radboud University, Toernooiveld 7, 6525 ED Nijmegen, The Netherlands 3Dresden High Magnetic Field Laboratory (HLD-EMFL), Helmholtz-Zentrum Dresden- Rossendorf, 01328 Dresden, Germany 4Diamond Light Source, Harwell Science and Innovation Campus, Fermi Ave, Didcot, Oxford- shire, OX11 0QX, UK 5Physics Department, Oxford University, Oxford, OX1 3PU, UK 6Max Planck Institute for the Physics of Complex Systems, 01187 Dresden, Germany Recent experiments have revealed spectacular transport properties of conceptually simple 1 semimetals. For example, normal semimetals (e.g., WTe2) have started a new trend to realize a large magnetoresistance, which is the change of electrical resistance by an external magnetic field. Weyl semimetal (WSM) 2 is a topological semimetal with massless relativistic arXiv:1502.04361v2 [cond-mat.mtrl-sci] 22 Jun 2015 electrons as the three-dimensional analogue of graphene 3 and promises exotic transport properties and surface states 4–6, which are different from those of the famous topological 1 insulators (TIs) 7, 8. In this letter, we choose to utilize NbP in magneto-transport experiments because its band structure is on assembly of a WSM 9, 10 and a normal semimetal. Such a combination in NbP indeed leads to the observation of remarkable transport properties, an extremely large magnetoresistance of 850,000% at 1.85 K (250% at room temperature) in a magnetic field of 9 T without any signs of saturation, and ultrahigh carrier mobility of 5×106 cm2 V−1 s−1 accompanied by strong Shubnikov–de Hass (SdH) oscillations.
    [Show full text]
  • Properties of Liquid Argon Scintillation Light Emission
    Properties of Liquid Argon Scintillation Light Emission Ettore Segreto∗ Instituto de F´ısica \Gleb Wataghin" Universidade Estadual de Campinas - UNICAMP Rua S´ergio Buarque de Holanda, No 777, CEP 13083-859 Campinas, S~aoPaulo, Brazil (Dated: December 14, 2020) Liquid argon is used as active medium in a variety of neutrino and Dark Matter experiments thanks to its excellent properties of charge yield and transport and as a scintillator. Liquid argon scintillation photons are emitted in a narrow band of 10 nm centered around 127 nm and with a characteristic time profile made by two components originated by the decay of the lowest lying 1 + 3 + ∗ singlet, Σu , and triplet states, Σu , of the excimer Ar2 to the dissociative ground state. A model is proposed which takes into account the quenching of the long lived triplet states through the + self-interaction with other triplet states or through the interaction with molecular Ar2 ions. The model predicts the time profile of the scintillation signals and its dependence on the intensity of an external electric field and on the density of deposited energy, if the relative abundance of the unquenched fast and slow components is know. The model successfully explains the experimentally observed dependence of the characteristic time of the slow component on the intensity of the applied electric field and the increase of photon yield of liquid argon when doped with small quantities of xenon (at the ppm level). The model also predicts the dependence of the pulse shape parameter, Fprompt, for electron and nuclear recoils on the recoil energy and the behavior of the relative light yield of nuclear recoils in liquid argon, Leff .
    [Show full text]
  • Charge Separation and Dissipation in Molecular Wires Under a Light Radiation
    Charge Separation and Dissipation in Molecular Wires under a Light Radiation Hang Xie*1, Yu Zhang2, Yanho Kwok 3, Wei E.I. Sha4 1 Department of Physics, Chongqing University, Chongqing, China 2Department of Chemistry, Northwestern University, Evanston, Illinois, United States 3Department of Chemistry, the University of Hong Kong, Hong Kong, China 4 College of Information Science & Electronic Engineering, Zhejiang University, Hangzhou 310027, P. R. China Photo-induced charge separation in nanowires or molecular wires had been studied in previous experiments and simulations. Most researches deal with the carrier diffusions with the classical phenomenological models, or the static energy levels by quantum mechanics calculations. Here we give a dynamic quantum investigation on the charge separation and dissipation in molecule wires. The method is based on the time-dependent non-equilibrium Green’s function theory. Polyacetylene chain and poly-phenylene are used as model systems with a tight-binding Hamiltonian and the wide band limit approximation in this study. A light pulse with the energy larger than the band gap is radiated on the system. The evolution and dissipation of the non-equilibrium carriers in the open nano systems are studied. With an external electric potentials or impurity atoms, the charge separation is observed. Our calculations show that the separation behaviors of the electron/hole wave packets are related to the Coulomb interaction, light intensity and the effective masses of electron/hole in the molecular wire. I. INTRODUCTION In the development of photovoltaic devices, some nanostructures such as graphene, silicon-nanowires, and 2D materials have gained a lot of interest [1, 2].
    [Show full text]
  • Holes and the Spin Separation of Orbital Electrons David Lindsay Johnson Overview (Abstract)
    Holes and the Spin Separation of Orbital Electrons David Lindsay Johnson Overview (Abstract) Semiconductor theory relies on holes to act as the positive charge equivalents of electrons so as to support diffusion and drift across the depletion zone of a p-n junction . Holes need to be capable of movement to act as positive charge carriers, and to be involved in random collisions to produce the Brownian motion required to support diffusion and drift. Lack of movement, or even the required type of movement, is a major problem for semiconductor theory. The Pauli Exclusion Principle indicates that, if an atomic orbital is occupied by an electron of one-half spin state, the orbital may only be shared by an electron of opposite spin (i.e. negative one-half spin). An atomic orbital is full when it is occupied by a pair of electrons of opposite spin, with no more electrons able to enter it until one of the pair vacates the orbital. This paper looks at the possibility and implications of extending the electron spin concept to free electrons within semiconductors, with positive and negative charge carriers simply being electrons with opposite spin. The existence of two physically different charge carriers in the form of opposite-spin electrons, which requires only minor terminology adjustments to semiconductor theory, provides a better explanation of the formation and nature of electric fields; capacitor charge/discharge; and micro/radio wave generation. Also, the concept of electric currents being the one-way movement of generic electron charge carriers, which totally ignores electron spin, is challenged.
    [Show full text]
  • Strong-Field Control and Spectroscopy of Attosecond Electron-Hole Dynamics in Molecules
    Strong-field control and spectroscopy of attosecond electron-hole dynamics in molecules Olga Smirnovaa,b, Serguei Patchkovskiia, Yann Mairessea,c, Nirit Dudovicha,d, and Misha Yu Ivanova,e,1 aNational Research Council of Canada, 100 Sussex Drive, Ottawa, ON, Canada K1A 0R6; bMax Born Institute, Max Born Strasse 2a, D-12489 Berlin, Germany; cCentre Lasers Intenses et Applications, Universite´Bordeaux I, Unite´Mixte de Recherche 5107 (Centre National de la Recherche Scientifique, Bordeaux 1, CEA), 351 Cours de la Libe´ration, 33405 Talence Cedex, France; dDepartment of Physics of Complex Systems, Weizmann Institute of Science, Rehovot 76100, Israel; and eDepartment of Physics, Imperial College London, South Kensington Campus, London SW7 2AZ, United Kingdom Communicated by Stephen E. Harris, Stanford University, Stanford, CA, July 19, 2009 (received for review August 8, 2008) Molecular structures, dynamics and chemical properties are deter- electron from either ⌸ vs. ⌺ or bonding vs. nonbonding orbital. mined by shared electrons in valence shells. We show how one can Increasing laser wavelength ␭ suppresses runaway nonadiabatic selectively remove a valence electron from either ⌸ vs. ⌺ or excitations (19) while keeping ionization channels intact. Con- bonding vs. nonbonding orbital by applying an intense infrared trol over the initial electronic excitation is a gateway to control- laser field to an ensemble of aligned molecules. In molecules, such ling molecular fragmentation that follows. ionization often induces multielectron dynamics on the attosecond Because tunnel ionization can create electronic excitations, time scale. Ionizing laser field also allows one to record and the hole left in a molecule will move on attosecond time-scale reconstruct these dynamics with attosecond temporal and sub- determined by inverse energy spacing between excited electronic Ångstrom spatial resolution.
    [Show full text]
  • 28. Particle Detectors 1 28
    28. Particle detectors 1 28. PARTICLE DETECTORS Revised 2006 (see the various sections for authors). In this section we give various parameters for common detector components. The quoted numbers are usually based on typical devices, and should be regarded only as rough approximations for new designs. More detailed discussions of detectors and their underlying physics can be found in books by Ferbel [1], Grupen [2], Kleinknecht [3], Knoll [4], and Green [5]. In Table 28.1 are given typical spatial and temporal resolutions of common detectors. Table 28.1: Typical spatial and temporal resolutions of common detectors. Revised September 2003 by R. Kadel (LBNL). Resolution Dead Detector Type Accuracy (rms) Time Time Bubble chamber 10–150 µm 1 ms 50 msa Streamer chamber 300 µm2µs 100 ms Proportional chamber 50–300 µmb,c,d 2 ns 200 ns Drift chamber 50–300 µm2nse 100 ns Scintillator — 100 ps/nf 10 ns Emulsion 1 µm— — Liquid Argon Drift [Ref. 6] ∼175–450 µm ∼ 200 ns ∼ 2 µs Gas Micro Strip [Ref. 7] 30–40 µm < 10 ns — Resistive Plate chamber [Ref. 8] 10 µm 1–2 ns — Silicon strip pitch/(3 to 7)g hh Silicon pixel 2 µmi hh a Multiple pulsing time. b 300 µmisfor1mmpitch. c ± Delay line cathode√ readout can give 150 µm parallel to anode wire. d wirespacing/ 12. e For two chambers. f n = index of refraction. g The highest resolution (“7”) is obtained for small-pitch detectors ( 25 µm) with pulse-height-weighted center finding. h Limited by the readout electronics [9]. (Time resolution of ≤ 25 ns is planned for the ATLAS SCT.) i Analog readout of 34 µm pitch, monolithic pixel detectors.
    [Show full text]
  • Optical Physics of Quantum Wells
    Optical Physics of Quantum Wells David A. B. Miller Rm. 4B-401, AT&T Bell Laboratories Holmdel, NJ07733-3030 USA 1 Introduction Quantum wells are thin layered semiconductor structures in which we can observe and control many quantum mechanical effects. They derive most of their special properties from the quantum confinement of charge carriers (electrons and "holes") in thin layers (e.g 40 atomic layers thick) of one semiconductor "well" material sandwiched between other semiconductor "barrier" layers. They can be made to a high degree of precision by modern epitaxial crystal growth techniques. Many of the physical effects in quantum well structures can be seen at room temperature and can be exploited in real devices. From a scientific point of view, they are also an interesting "laboratory" in which we can explore various quantum mechanical effects, many of which cannot easily be investigated in the usual laboratory setting. For example, we can work with "excitons" as a close quantum mechanical analog for atoms, confining them in distances smaller than their natural size, and applying effectively gigantic electric fields to them, both classes of experiments that are difficult to perform on atoms themselves. We can also carefully tailor "coupled" quantum wells to show quantum mechanical beating phenomena that we can measure and control to a degree that is difficult with molecules. In this article, we will introduce quantum wells, and will concentrate on some of the physical effects that are seen in optical experiments. Quantum wells also have many interesting properties for electrical transport, though we will not discuss those here.
    [Show full text]
  • Electron-Hole Pairs
    Electronic Supplementary Material (ESI) for Nanoscale. This journal is © The Royal Society of Chemistry 2019 The excitons (electron-hole pairs) generated by semiconductor materials excited by light could recombine through: direct recombination of electrons and holes, indirect recombination luminescence through surface defect states, and recombination luminescence through impurity levels. These luminescence modes compete with each other, and proportion of luminescence modes will depend on specific structures of the quantum dots. Fewer surface defects of quantum dots will induce fewer trapped electrons and holes, increasing the probability of exciton state luminescence wand yielding strong illuminance intensity of the exciton state. Otherwise, the corresponding exciton state luminescence intensity will be weak. Therefore, exciton luminescence could be improved through fabrication of quantum dots with intact surfaces or by modification of quantum dots surfaces by ligands or their encapsulation in matrices. The effect of temperature on bandgap width of bulk material primarily depends on thermal expansion and electroacoustic interaction of the crystal lattice. The relationship between bandgap width and energy band of bulk semiconductor materials can be described by the well-known Varshni empirical formula (Equation 1), which could also be used for quantum dots. T 2 E T E 0 (1) g g T where: Eg(0) represents gap width of the material at 0 K in eV, α is the thermal expansion system of the material in eV·K-1, T is temperature in K, β is approximate Debye temperature of material in K. [43, 44] As can be seen from the Varshni empirical formula, increase in temperature should T 2 raise the value of factor but gap width of the material will decrease.
    [Show full text]
  • Excitations of Quasi-Particles in Nanostructured Systems
    University of Tennessee, Knoxville TRACE: Tennessee Research and Creative Exchange Doctoral Dissertations Graduate School 5-2017 Excitations of Quasi-Particles in Nanostructured Systems Jingxuan Ge University of Tennessee, Knoxville, [email protected] Follow this and additional works at: https://trace.tennessee.edu/utk_graddiss Part of the Other Materials Science and Engineering Commons Recommended Citation Ge, Jingxuan, "Excitations of Quasi-Particles in Nanostructured Systems. " PhD diss., University of Tennessee, 2017. https://trace.tennessee.edu/utk_graddiss/4461 This Dissertation is brought to you for free and open access by the Graduate School at TRACE: Tennessee Research and Creative Exchange. It has been accepted for inclusion in Doctoral Dissertations by an authorized administrator of TRACE: Tennessee Research and Creative Exchange. For more information, please contact [email protected]. To the Graduate Council: I am submitting herewith a dissertation written by Jingxuan Ge entitled "Excitations of Quasi- Particles in Nanostructured Systems." I have examined the final electronic copy of this dissertation for form and content and recommend that it be accepted in partial fulfillment of the requirements for the degree of Doctor of Philosophy, with a major in Materials Science and Engineering. Gerd Duscher, Major Professor We have read this dissertation and recommend its acceptance: Ramki Kalyanaraman, Haixuan Xu, Dibyendu Mukherjee Accepted for the Council: Dixie L. Thompson Vice Provost and Dean of the Graduate School (Original signatures are on file with official studentecor r ds.) Excitations of Quasi-Particles in Nanostructured Systems A Dissertation Presented for the Doctor of Philosophy Degree The University of Tennessee, Knoxville Jingxuan Ge May 2017 Dedications To my father, my parents in-law, my husband, and my son.
    [Show full text]
  • Maxwell Equations Including Magnetic Monopoles
    The Maxwell equations including magnetic monopoles © W.D.Bauer 27.02.04 [email protected] Abstract: The derivation of the Maxwell equations is reproduced whereby magnetic charges are included. This ansatz yields following results: 1) Longitudinal Ampère forces in a differential magnetostatic force law are improbable. Otherwise a electric current would generate magnetic charges. 2) Simple magnetic and electric induced polarization phenomena are completely analogous and are described by a Laplace equation. 3) Permanent magnetic fields can be understood to be caused by magnetic charges. Consequently, a moving permanent magnet represents a magnetic current which generates a electric field. 4) The electromagnetic tensors of energy and momentum have some additional terms which are written down generally. 5) If the electric material parameters are influenced by non- electric variables (for instance temperature or pressure), the formalism of electrodynamics is not sufficient to describe the system and has to be completed by further differential equations from the other areas of physics. 6) Nonlinear electro-thermodynamic systems may violate the second law of thermodynamics. This is illustrated by a electric cycle with a data storing FET invented by Yusa & Sakaki. 1 1) Introduction The Maxwell equations are about 150 Jahre old. They are the mathematical compilation of the experiments and considerations based on the original work of Cavendish, Coulomb, Poisson, Ampère, Faraday and others [1]. Mathematically they are partial differential equations. Different notations exist for them: most popular is the vector notation (O. Heaviside), which replaced the original notations in quaternions (J.C. Maxwell). More modern is the tensor notation (H.
    [Show full text]