PIC 9.0.4 Release Notice

Total Page:16

File Type:pdf, Size:1020Kb

PIC 9.0.4 Release Notice Oracle® Communications Performance Intelligence Center Release Notice Release 9.0.4 910-6618-01 Revision K January 2015 Oracle Communications Performance Intelligence Center Release Notice, Release 9.0.4 Copyright © 2000, 2015, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notices are applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to thirdparty content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle. PIC 9.0.4 Release Notice Release Notice PIC 9.0.4 Release Notice Release notices are distributed to customers with each new release of software. This release notice identifies the new features delivered with this release. It also lists the PRs that have been Resolved/Verified and PRs that are Ready-to-Test. Introduction ..................................................................................................................................... 4 PIC 9.0.4 Load Lineup for the Baseline Release ............................................................................ 5 Architecture versus product ............................................................................................................ 6 Legacy & Analytics interoperability ............................................................................................... 6 Upgrade Path ................................................................................................................................... 7 PIC 9.0.x Installation and Upgrade Documentation ....................................................................... 7 PIC / Eagle5 Compatibility Matrix ................................................................................................. 7 NSP Workstation H/W Description ................................................................................................ 8 PIC 9.0.4 Feature Content Summary .............................................................................................. 8 PMF 10GE interface ................................................................................................................... 8 Gb over E1 to GboIP converter .................................................................................................. 8 xDR data warehousing DWS-64 ................................................................................................. 8 ProTrace PCAP export : Sigtran only ........................................................................................ 8 PMF optimization ....................................................................................................................... 9 New xDR Builders ..................................................................................................................... 9 Datafeed ...................................................................................................................................... 9 Automated Static Enrichment Update ........................................................................................ 9 PR Severity Definitions .................................................................................................................. 9 Resolved PRs – PIC 9.0x Resolved PR’s .................................................................................... 10 PIC ISO can be burn on DVD’s .................................................................................................... 16 Appendix A: Supported Protocols – PIC .................................................................................... 17 NOTE: The information in this Release Notice reflects the latest data available as of its date of publication and is subject to change. 3 910-6618-01 Revision K PIC 9.0.4 Release Notice Introduction The following document describes the PIC 9.0.4 Release Notice. PIC 9.0.4 is a build stream that provides major and minor content releases for new features. It also contains PR fixes to address issues found in the deployment of previous PIC releases. The most current build stream is PIC 9.0.4 and PN’s for that stream are included in this Release Notice. The information in this document reflects the latest data available as of its date of publication. 4 910-6618-01 Revision K PIC 9.0.4 Release Notice PIC 9.0.4 Load Lineup for the Baseline Release The builds released for PIC 9.0.4 Load Lineup consists of the following software components and versions. This table also identifies compatible SW versions of existing applications and components that were not changed by PIC 9.0.4 development activities. Customers with installed versions previous to PIC 9.0.4 ordering expansions may request the expansion to be shipped with their current SW version PIC 9.0.4 – 1.4.0 Software Media/Iso PN Zip SKU Version All Servers IXP (32bits) 9.0.4-6.1.0 872-2537-105 V45667-01 872-2539-105 V45666-01 DWS (64bits) 9.0.4-6.1.0 Oracle 10 NSP (32bits) 10.2.0.5 872-2252-102 V46088-01 Oracle 11 (64bits) for DWS 24/25 disk config (fresh) 11.2.0.3 872-2540-102 V45669-01 NSP (32bits) 9.0.4-5.2.0 872-2536-107 V45668-01 Weblogic (32bits) 10.3.5.0-2.2.0 872-2423-102 V45672-01 IMF for HP & Tek2& Tek3 (32bits) 9.0.4-6.2.0 872-2541-106 V45675-01 PMF for HP G5 / G6 (32bits) 9.0.4-6.2.0 872-2541-106 V45675-01 872-2562-106 V45674-01 PMF for HP Gen8 (64bits) 9.0.4-6.2.0 872-2543-107 V45673-01 xDR Builder (32bits) 9.0.4-7.1.0 Tadapt(32bits) 9.0.2-1.1.0 872-2684-101 V45671-01 TPD Versions TPD Linux HP &TEK2 &TEK 3 (32bits) 5.1.2-73.6.0 872-2565-103 V43356-01 TPD Linux HP (Gen8) (64bits) 5.1.2-73.6.0 872-2509-103 V43355-01 Firmware HP SOLUTIONS FIRMWARE Min 2.2.4 Last available Last available PM&C 5.0.3-50.18.1 PM&C 872-2441-109 V45439-01 TVOE 2.0.2-80.34.0 872-2442-110 V43304-01 If you need assistance with license keys to activate purchased products, please visit http://www.oracle.com/us/support/licensecodes/index.html If you purchase hardware through Tekelec/Oracle, please open a SR to get access to the recommended firmware package 5 910-6618-01 Revision K PIC 9.0.4 Release Notice Architecture versus product IMF always 32bits PMF o Gen8 64bits o All other H/W 32bits IXP o Base / PDU always 32bits o DWS : Fresh install 64bits NSP always 32 bits Legacy & Analytics interoperability All Servers Report Server 9.0.1-2.1.0 895-1576-402 872-2637-101 PPS 9.0.1-2.1.0 895-1576-402 872-2636-101 MSW 9.1.5-2.0.0 N/A 872-2112-101 ATM 155 N/A 872-1389-01 SM – used with MSW 1.5.1-0.0.0 N/A 872-1279-01
Recommended publications
  • INAP); Part 1: Protocol Specification for Camel Phase 2 2 Draft ETSI EN 301 668-1 V1.1.1 (1999-07
    Draft ETSI EN 301 668-1 V1.1.1 (1999-07) European Standard (Telecommunications series) Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) extension; Intelligent Network Application Protocol (INAP); Part 1: Protocol specification for Camel Phase 2 2 Draft ETSI EN 301 668-1 V1.1.1 (1999-07) Reference DEN/SPS-03053-1 (fg090ico.PDF) Keywords IN, INAP, ISDN, mobile, protocol ETSI Postal address F-06921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Internet [email protected] Individual copies of this ETSI deliverable can be downloaded from http://www.etsi.org If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 1999. All rights reserved. ETSI 3 Draft ETSI EN 301 668-1 V1.1.1 (1999-07) Contents Intellectual Property Rights ............................................................................................................................... 6 Foreword............................................................................................................................................................ 6 1 Scope.......................................................................................................................................................
    [Show full text]
  • Release Notes Release 10.3.0.2 E98788-01
    Oracle® Communications Performance Intelligence Center Oracle Communications Performance Intelligence Center Release Notes Release 10.3.0.2 E98788-01 November 2019 Oracle® Communications Performance Intelligence Center Oracle Communications Performance Intelligence Center Release Notes, Release 10.3.0.2 Copyright © 2003, 2019 Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notices are applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs.
    [Show full text]
  • N2SCP CAMEL/INAP Conformance
    N-Squared Software N2SCP CAP/INAP Protocol Conformance Statement Version 2020-08 N2SCP CAP/INAP Protocol Conformance Statement Version 2020-08 1 Document Information 1.1 Scope and Purpose This document describes the implementation of the CAMEL (including INAP variants) protocol for real- time SCP flows for voice interaction control using the N-Squared Service Control Point (N2SCP) family of applications. The N2SCP family of applications includes: • N2DSG-SCP (CAMEL/Diameter Signalling Gateway) • N2NP-SCP (Number Portability translation application) • N2ACD-SCP (Advanced Call Distribution application for Toll-Free and other routing services) • …plus other custom SCP services that may be developed. All of these applications use the N2SCP framework. They do not typically use all of the framework. Please refer to the relevant technical guide ([R-N2-DSG-TG], [R-N2-NP-TG], [R-N2-ACD-TG]) for application-specific scenarios and configuration parameters. This document assumes a working knowledge of the relevant CAP/INAP and other telephony concepts, including the standard CAP/INAP interactions between an SCP, an SSP, and an SRP (or Intelligent Peripheral). 1.2 Definitions, Acronyms, and Abbreviations Term Meaning AC Apply Charging ACR Apply Charging Report ARI Assist Request Instructions ASN.1 Abstract Syntax Notation One AT Activity Test BCSM Basic Call State Model CAMEL Customized Applications for Mobile Network Enhanced Logic CAP CAMEL Application Part CIR Call Information Request/Report CTR Connect To Resource CWA Continue With Argument DFC
    [Show full text]
  • CAMEL User's Guide Contains the Following Information: No Title Description 1 Introduction to CAMEL Overview of CAMEL Protocols
    Document Part Number: P_EXCL_CAMEL_UG_2.5 COPYRIGHT Copyright © 2003 IntelliNet Technologies, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or any means electronic or mechanical, including photocopying and recording for any purpose other than the reader’s personal use without the written permission of IntelliNet Technologies, Inc. Information in this document is subject to change without notice. IntelliNet Technologies 1990 W. New Haven Ave., Suite 307 Melbourne, FL 32904 U.S.A. Phone: +1 321 726 0686 Fax: +1 321 726 0683 Web site: www.intellinet-tech.com TRADEMARKS IntelliNet Technologies and the IntelliNet Technologies logo are trademarks of IntelliNet Technologies, Inc. Other brands and their products are registered trademarks or trademarks of their respective owners. 2 CAMEL User’s Guide Revision History Revision Date Notes Rev. 1.0 7-9-2003 Begin document modification for Lucent Excel (P. Arteaga) Rev. 2.0 7-30-2003 Contents of the document reorganized per Gururaj and Santanu (Shobha). Rev. 2.1 9-10-2003 Added details of every message (Invoke and Response) along with the associated parameters and the header files in Chapter 3 (Shobha). Rev. 2.2 9-11-2003 Updated Chapter 5 (Shobha). Rev. 2.3 9-15-2003 Added licensing section (Shobha). Rev. 2.4 11-07-2003 Added section Building and Running CAMEL Application on HP-UX (Shobha). Rev. 2.5 11-10-2003 Added section Building and Running CAMEL Application on Linux (Shobha). 3 CAMEL User’s Guide Contents Revision
    [Show full text]
  • MAPS™ Brochure from Brochures.Html Website, Or Refer to Webpage
    Message Automation & Protocol Simulation (MAPS™) Multi-Interface, Multi-Protocol Simulator - TDM, IP, 2G, 3G, 4G, 5G Overview GL's Message Automation & Protocol Simulation (MAPS™) is a protocol simulation/ emulation and conformance test tool that supports a variety of protocols such as MGCP, SIP, MEGACO, SS7, ISDN, GSM, CAS, MC- MLPPP, MAP, LTE, UMTS, SS7 SIGTRAN, ISDN SIGTRAN, SIP I, Diameter, MAP IP, 5G N1 N2, N4 and others. This protocol emulation tool covers solutions for both protocol simulation and analysis. The product also supports RTP, TDM, TRAU GSM, and Mobile traffic simulation over various network. The application includes various test plans and test cases to support the testing of real- time entities. Along with automation capability, the application gives users the unlimited ability to edit messages and control call scenarios (message sequences). "Call Scenarios" are generated through scripts. MAPS™ is designed to work on TDM interfaces as well as on the Ethernet interfaces. TDM signaling protocols such as SS7, ISDN, CAS, MC-MLPPP, MAP, IUP, CAP, INAP, GSM, and FXO/FXS operate over TDM networks, whereas SIP, MEGACO, and MGCP operate over IP networks. MAPS™ supports 3G & 4G mobile protocol simulation such as LTE (S1, eGTP) interfaces, LTE Diameter [S6a, S6d, S13, Cx/Dx, Gx, Rx, SLg, SLh], INAP IP (ANSI, ITU), CAP IP (ANSI, ITU), GSM A over IP, SKINNY, MAP IP, BICC IP, GPRS, and UMTS (IuCS, IuPS, IuH) over IP. MAPS™ architecture supports both Binary and Text Based Protocol Simulation. MAPS™ also supports Location Services (LCS) simulation for positioning mobile devices. Simulates SLg, SLh interfaces (GMLC, MME, HSS), Lg, Lh interfaces (GMLC, MSC, SGSN, HLR), SLs interface (MME, E-SMLC) and Lb interface (MME, SMLC) and interfaces implementing positioning functionality in a cellular network.
    [Show full text]
  • IDP and Analyzed Information Features 910-5805-001 Revision a December 2009
    Tekelec EAGLE® 5 Integrated Signaling System Feature Manual - IDP and Analyzed Information Features 910-5805-001 Revision A December 2009 Copyright 2009 Tekelec. All Rights Reserved. Printed in USA. Legal Information can be accessed from the Main Menu of the optical disc or on the Tekelec Customer Support web site in the Legal Information folder of the Product Support tab. Table of Contents Chapter 1: Introduction.......................................................................9 Introduction.............................................................................................................................10 Scope and Audience...............................................................................................................10 Manual Organization..............................................................................................................10 Related Publications...............................................................................................................11 Documentation Availability, Packaging, and Updates.....................................................11 Documentation Admonishments..........................................................................................12 Customer Care Center............................................................................................................12 Emergency Response..............................................................................................................14 Locate Product Documentation on the Customer
    [Show full text]
  • SS7 Signalling in Mobile Networks – 3 Days
    SS7 Signalling in Mobile Networks – 3 days CONTENTS The SS7 Signalling in Mobile Networks course explains and describes the world’s most widespread inter-exchange signalling system used in fixed and mobile telecommunication today: Signalling System No 7. It provides the basic ideas and structure of the SS7 protocol stack. Different aspects of various signalling protocols and signalling applications in the telecommunications world are covered. There are a few detailed examples from both mobile and fixed networks. The course focus is on ITU SS7 and GSM/UMTS core network protocols that are based on SS7 system. The participants will also gain a general understanding on how to interpret log files and traces taken from live networks. PREREQUISITES General telecom and basic signalling knowledge is recommended. For background knowledge, we recommend the Apis’ course 3GPP Mobile Systems Overview. SS7 Introduction • The overview of the SS7 system • The definition and structure of the SS7 signalling network: SP, STP, SL, LS, etc. • The logical division of SS7: MTP and User Parts • Use of SS7 protocol in 2G and 3G mobile networks and fixed networks • Overview of various SS7 protocols MTP - Message Transfer Part • The functions of the different MTP levels • The structure and functions of MTP signal units, signalling link states and link management functions • MTP 3 message handling – addressing, routing, load sharing, and distribution • The overview of Signalling Network Management and Testing functions ISUP - ISDN User Part • Use and functions of
    [Show full text]
  • TR 129 903 V5.0.0 (2001-12) Technical Report
    ETSI TR 129 903 V5.0.0 (2001-12) Technical Report Universal Mobile Telecommunications System (UMTS); Feasibility study on SS7 signalling transportation in the core network with SCCP-User Adaptation (SUA) (3GPP TR 29.903 version 5.0.0 Release 5) 3 GPP TR 29.903 version 5.0.0 Release 5 1 ETSI TR 129 903 V5.0.0 (2001-12) Reference DTR/TSGN-0429903v500 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission.
    [Show full text]
  • EN 301 668-1 V1.1.2 (2000-05) European Standard (Telecommunications Series)
    Final draft ETSI EN 301 668-1 V1.1.2 (2000-05) European Standard (Telecommunications series) Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1) extension; Intelligent Network Application Protocol (INAP); Part 1: Protocol specification for Camel Phase 2 2 Final draft ETSI EN 301 668-1 V1.1.2 (2000-05) Reference DEN/SPS-03053-1 Keywords IN, INAP, ISDN, mobile, protocol ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.:+33492944200 Fax:+33493654716 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/ If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
    [Show full text]
  • SS7 Vulnerabilities
    Contents 1. Introduction ..................................................................................... 3 2. Market Drivers and Business Challenges ..................................5 2.1 History of SS7 ..................................................................................................................... 5 2.2 Evolution to Diameter ......................................................................................................... 6 3. SS7 Security Threats .....................................................................8 3.1 Requirements for carrying out an attack .................................................................. 8 3.2 Who is the Attacker? ........................................................................................................ 8 3.3 Types of Network / Subscriber Attacks ..................................................................... 9 3.3.1 Subscriber Identity Disclosure ......................................................................................... 9 3.3.2 Discovery of Subscribers Location .............................................................................. 13 3.3.3 Disruption of Subscribers Availability ........................................................................ 16 3.3.4 Intercepting SMS Messages ........................................................................................... 20 3.3.5 Manipulation of USSD Request ..................................................................................... 23 3.3.6 Manipulation
    [Show full text]
  • IN@Vantage in Introduction V7a
    Intelligent Network IN@vantage IN Introduction V7a IN Training Center Intelligent Network Training Center Vienna IN Introduction V7a Edition 9/02 Technical modifcations possible. Technical specifications and features are binding only insofar as they are specifically and ex- pressly agreed upon in a written contract. The software and hardware names used in this document are registered trademarks and are thus subject to the legal provisions thereof. The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registrations of a utility model or design, are reserved. Intelligent Network IN Introduction V7a Contents 1 What is an Intelligent Network? ................................................................................... 1-3 1.1 Example: Prepaid Service (PPS) ........................................................................................1-4 1.1.1 Life Cycle ..........................................................................................................................1-4 1.1.2 Additional Features............................................................................................................1-6 1.1.3 PPS – Service Logic for Online Charging..........................................................................1-10 1.2 IN Goals ..........................................................................................................................1-12
    [Show full text]
  • Nuno Filipe Oliveira Novo Controlo E Gestão De Sessões Multimédia IP
    Universidade de Aveiro Departamento de Electrónica Telecomunicações e 2010 Informática Nuno Filipe Oliveira Controlo e Gestão de Sessões Multimédia IP Novo usando o IM-SSF Universidade de Aveiro Departamento de Electrónica Telecomunicações e 2010 Informática Nuno Filipe Oliveira Controlo e Gestão de Sessões Multimédia IP usando Novo o IM-SSF Dissertação apresentada à Universidade de Aveiro para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Electrónica e Telecomunicações, realizada sob a orientação científica do Doutor Amaro Fernandes de Sousa, Professor Auxiliar do Departamento de Electrónica Telecomunicações e Informática da Universidade de Aveiro O júri Presidente Doutor Aníbal Manuel de Oliveira Duarte Professor Catedrático da Universidade de Aveiro Vogais Doutor Paulo Manuel Martins de Carvalho Professor auxiliar da Escola de Engenharia da Universidade do Minho Doutor Amaro Fernandes de Sousa Professor auxiliar da Universidade de Aveiro agradecimentos Ao Professor Doutor Amaro Fernandes de Sousa, do Departamento de Engenharia de Electrónica e de Telecomunicações da Universidade de Aveiro, na qualidade de orientador, pela oportunidade concedida para a realização do presente trabalho, assim como pelo rigor, crítica permanente, sessões de trabalho conjunto e pela disponibilidade e empenho que sempre demonstrou. Ao Mestre António Amaral pela amizade e pela colaboração que foi de extrema importância na realização desta dissertação. À PT Inovação, pelas condições que colocaram à minha disposição. Finalmente, gostaria de agradecer a todos os colegas da PT Inovação, pelo apoio e pela colaboração que foi de extrema importância na elaboração desta dissertação palavras-chave Sinalização, Sessões Multimédia IP, IMS, IM-SSF, 3GPP resumo Na rede Internet Protocol (IP), é sempre possível um terminal comunicar com outro terminal remoto desde que seja conhecido o endereço IP destino e o número da porta da aplicação destino.
    [Show full text]