DOCSLIB.ORG

Diamond Blades & Core Bits

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Diamond Blades & Core Bits Diamond Tool Catalog 2012 www.multiquip.com Diamond Blades — Important Information Equipment Reference Icons Equipment Icons Angle Grinders (4" to 9") Flat Saw (Small HP) Various ICONS are placed next to the Diamond Tools to represent the equipment that Hand-Held Power Drill Flat Saw (Medium HP) is recommended for proper operations. Circular Saw (4" to 10") Flat Saw (Large HP) There are many occasions where Diamond Blades/Bits can Hand-Held Cut Off Saw be used on multiple pieces of Crack Chase Saw equipment. It is very important to check shaft speed (RPM), flange/ Tile/Masonry (Table) Saw Core Drill Rig mounting sizes and power rating and other specifications to ensure Masonry (Table) Saw that the power tool used matches Chop Saw up to the chosen Blade/Bit. Floor Grinder Value/Performance Reference Icons Performance Icons Economy Quality product with fine operational life. Value ICONS are placed next to Economy Plus Very good quality, cutting speed and the Diamond Tools to represent operational life. overall performance, value and return-on-investment. Standard Great performing product. Great value for your Factors that determine the overall investment. value are: Premium Excellent performing product. Exceptional n Segment/Rim Height return-on-investment. n Diamond Type Premium Plus Superior designed product. Trusted n Diamond Quality performance and service life. n Diamond Concentration Supreme Outstanding performing product. with an n Segment/Rim Weld Process equivalent return-on-investment. n Steel Core/Bit barrel quality design Highest quality product. Professional performance, operational life and results. Diamond Tools classified as ‘DRY/WET’ may be cooled with water or use the circular DRY/WET airflow of operations to diminish the build-up of heat. When operating ‘DRY’, it is best to CUT use an intermittent cutting/drilling procedure to allow sufficient time for steel core/barrel Blade/Bit cooling. Cooling Icons Diamond Tools classified as ‘WET’ must be used with water to reduce the extreme Cooling icons are placed WET heat that builds up during operations. Water also reduces the dust signature and helps next to the Diamond CUT remove residue. Operating a WET product without water may cause diamond tool Tools to represent damage and creates a safety hazard. A continuous flow of fresh water is critical to safe, the required methods effective operations. (water and/or ambient Diamond Tools classified as ‘DRY Cut’ are specifically engineered to operate with the air) to properly cool the DRY circular airflow as the sole agent for cooling the core/barrel. Water may be used to help diamond tool during CUT cool and control dust. operations. Diamond Tools classified as ‘DRY Drill’ are specifically engineered to operate with the DRY circular airflow as the sole agent for cooling the core bit barrel. Their best performance DRILL is generally characterized by not using water, but minimal water may be introduced to help cool and control dust during drilling operations. Table of Contents RIGHT ANGLE CIRCULAR SAW CHOP SAW GRINDERS (4" to 10") (10" to 14") DIAMOND TOOLS FOR... (4" to 9") General Purpose Materials - Dry/Wet Cut Standard Segmented ............................................................................................................................................................................ 1-3 Turbo Style ............................................................................................................................................................................................ 4-5 Combination/Special Materials - Dry/Wet Cut Combination Segmented ......................................................................................................................................................................... 6 The “Everything Blade” and Ductile Iron ............................................................................................................................................................. 6 Masonry Materials Dry/Wet Cut Segmented Blades - Block, Brick and Pavers ...............................................................................................................11-12 Natural Stone Materials Dry/Wet Cut Segmented & Continuous Rim .......................................................................................................................................... 14 Ceramic Tile Materials Continous Rim ....................................................................................................................................................................................... 15 Grinding Cup and Floor Diamond Wheels Segmented, Sidewinder, Trubo and Continuous Style ...................................................................................................................... 16-18 Tuck Pointing and Crack Chaser Blades Segmented, Water Design, and "V" Shape Style .............................................................................................................................. 19-20 SURFACE DIAMOND TOOLS FOR... GRINDER (10") Grinding Cup and Floor Diamond Wheels Segmented Sytle ............................................................................................................................................................................19 HAND-HELD CUTOFF SAW DIAMOND TOOLS FOR... (12" to 16") General Purpose Materials - Dry/Wet Cut Standard Segmented ............................................................................................................................................................................ 1-3 Turbo Style ............................................................................................................................................................................................ 4-5 Combination/Special Materials - Dry/Wet Cut Combination Segmented ......................................................................................................................................................................... 6 The “Everything Blade” and Ductile Iron ............................................................................................................................................................. 6 Masonry Materials Dry/Wet Cut Segmented Blades - Block, Brick and Pavers ...............................................................................................................11-12 Natural Stone Materials Dry/Wet Cut Segmented & Continuous Rim .......................................................................................................................................... 13 MASONRY SAWS DIAMOND TOOLS FOR... (10" to 20") General Purpose Materials - Dry/Wet Cut Standard Segmented ............................................................................................................................................................................ 1-3 Turbo Style ............................................................................................................................................................................................ 4-5 Combination/Special Materials - Dry/Wet Cut Combination Segmented ......................................................................................................................................................................... 6 The “Everything Blade” and Ductile Iron.............................................................................................................................................................. 6 Masonry Materials Wet Cut Segmented Standard, Noise Reducing and Silent Core — Block, Brick and Pavers................................................................. 7-12 Dry/Wet Cut Segmented Blades - Block, Brick and Pavers ...............................................................................................................11-12 Natural Stone Materials Dry/Wet Cut Segmented & Continuous Rim .......................................................................................................................................... 13 Wet Cut Standard Segmented, Noise Reducing and Silent Core ...................................................................................................................14 Table of Contents CRACK CHASER WALK-BEHIND WALK BEHIND WALK BEHIND DIAMOND TOOLS (Medium HP) (Low HP) (Medium HP) (High HP) FOR... General Purpose Materials - Dry/Wet Cut Standard Segmented ............................................................................................................................................................................ 1-3 Turbo Style ............................................................................................................................................................................................ 4-5 Combination/Special Materials - Dry/Wet Cut Combination Segmented ......................................................................................................................................................................... 6 Tuck Pointing and Crack Chaser Blades Segmented and "V" Shape Style ......................................................................................................................................................19-20 Cured and Green Concrete and Asphalt Dry/Wet Cut Segmented - Walk-Behind Series - Flat Sawing ................................................................................................................ 21 Dry/Wet Cut Segmented - Walk-Behind Series
Load more

Recommended publications
  • Total Drilling Solution – Main Catalog
    UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc. 28231 Avenue Crocker, Unit 80 Valencia, CA 91355 USA Phone: (661) 257-2288 Fax: (661) 257-3833 www.ukam.com TOTAL DRILLING SOLUTION – MAIN CATALOG DIAMOND DRILLS FROM .001” to 48” (.0254mm to 1219mm) UKAM Industrial Superhard Tools is a Leading Manufacturer a full range of Precision Diamond Core drills from .001" to 48" Diameter, drilling just about any type of material / application. Our products are used world wide in Industry, Research & Development, Contractor, & Hobby applications. Customers include some of the leading Fortune 500 companies, Military, Science & Space Organizations, Universities, R & D Organizations as well as Small Machine Shops. Diamond Drills are available from inventory in many different specifications, outside & inside diameters, drilling depths, bond types, diamond mesh sizes, mountings, & tolerances. We will work with you to determine your needs, and Why Buy Diamond Drills/Bits from UKAM Industrial Superhard Tools recommend the right solution for your specific material/application. You can count on us to improve • Huge Diamond Drill/Bit Variety • Immediate Worldwide Delivery you drilling operation to its ultimate efficiency. • Superior Quality & Consistency • Manufacturer Direct Prices • Best Value & Performance • Superior Technology & Innovation • Unmatched Technical Support • Purchase the Right Diamond Drill/Bit for your Needs the First Time INDUSTRIES USED IN: • Advanced Ceramics • Composites • Concrete • Glass • Quartz • Stone
    [Show full text]
  • Diamond Dressing Tools
    DIAMOND DRESSING TOOLS SiWe ringrazia thank Mr il sig.Ezio Ezio Ferrari Ferrari perfor hisla gentilecollaboration collaborazione catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 1 Diamond dressing tools 3 18 DRESSING ABRASIVE HAND-SET MULTI-POINT GRINDING WHEELS DIAMOND DRESSING TOOLS MTT ROUND HEAD AND MTQ SQUARE HEAD 6 SINGLE-POINT DIAMOND DRESSING TOOLS 20 PBP MULTI-POINT GRIT IMPREGNATED DIAMOND DRESSING TOOLS 10 SINGLE-POINT DIAMOND CHISEL DRESSING TOOLS FOR PROFILE GRINDING 24 DIAMOND ROLLS FOR PROFILING AND DRESSING 12 ABRASIVE GRINDING WHEELS BLADE-TYPE MULTI-POINT AND POLYCRYSTALLINE DIAMOND DRESSERS 16 MULTI-POINT AND POLYCRYSTALLINE DIAMOND ROTARY DRESSERS catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 2 2 catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 3 DRESSING ABRASIVE GRINDING WHEELS DRESSING ABRASIVE GRINDING WHEELS GENERAL RECOMMENDATIONS In all grinding operations correct dressing is important in order to obtain FOR USE OF best grinding wheel performance and optimal processing parameters DIAMOND DRESSERS on the workpiece. Choose type, shape and size of the tool based on size and specification of the grinding wheel and application. DRESSING CONVENTIONAL GRINDING WHEELS Diamond carat weight must never be less than the recommended value. The dressing process of conventional abrasive and special microcrystalline Diamond must always be sharp. Aluminium Oxide wheels is carried out with: natural and polycrystalline single-point diamond dressers Single point diamond dressers have a blade-type hand set multi-point natural diamond dressers more aggressive action on the grain and blade-type polycrystalline diamond dressers are mostly recommended for profile multi-point and polycrystalline rotary diamond dressers wheels and for rough grinding wheels.
    [Show full text]
  • Diamond Blades
    905-814-6859 - 1-866-517-3289 - www.marcur.com DIAMOND BLADES ECONO QUALITY • A value quality, entry level grade blade for the extremely cost conscious user • Provides good cutting performance at low initial cost • Ideal for first time and occasional users PREMIUM QUALITY • A premium quality, contractor grade blade for use on medium to large jobs • Provides excellent cutting performance at a reasonable initial cost • Ideal for general contractors, construction sites and rental yards SUPER PREMIUM QUALITY • A super premium, professional grade blade for professional contractors demanding the ultimate in diamond blade performance • JET-KUT™ Super Premium blades are specially formulated for fastest cutting, longest blade life and optimal cutting cost ratio DIAMOND BLADE PERFORMANCE TIPS DRY CUTTING BLADES • Dry cutting diamond blades do not require water during cutting operations • Specially designed to dissipate heat using air flow around the blade • To ensure longest blade life, a dry blade should be operated using an intermitent cutting action • After every 10-15 seconds of cutting, take the pressure off the blade and run it up to full speed for a few seconds • This cool down period allows adequate air to flow around the blade, eliminating excessive heat build-up and greatly extending the life of the blade • Dry blades must only be used for shallow cuts of 1" - 2" per pass maximum • If the required cutting depth is greater than this, make several shallow passes (step cutting) to achieve the desired depth. Failure to do so will severely decrease wheel life • All JET-KUT™ dry cutting diamond blades can be used wet for added cooling WET CUTTING BLADES • Wet cutting diamond blades must be used wet at all times to prevent excessive heat build-up during operation • A continuous water flow is essential as excessive heat will cause blade damage, loss of wheel life and could cause a safety hazard.
    [Show full text]
  • It Can Be 10.000 Without Re-Sharpening!
    100 Surgeries with one Meyco diamond knife? 1.000 Surgeries with one Meyco diamond knife? You will not believe it – it can be 10.000 without re-sharpening! lt is the statement of Dr. A. Hennig, who built up the Lahan Eye Hospital in Nepal. They cannot afford expensive disposables – they work with valuable Meyco diamond knives. You determine the life of your diamond knife. lt never ever gets dull from cutting the cornea or sclera – just avoid any contact with other instru- ments. Do you know of any cheaper knife? Meyco diamond knives with the high precision, fully titanium handle, are a true investment for long-term use. Meyco Diamond Knives since 1975 Offering decades of use Free hand diamond knives with straight handle for cataract surgery 4-5 Phaco knives with angled handle for “clear cornea” technique 6-7 Navigator (3D knives) 8 MICS the adequate diamond knives for micro incision coaxial surgery 9 Crescent and tunnel knives for scleral tunnel incision 10 Multi purpose diamond knife 11 The limbal relaxing incision knives 12-13 Diamond knife for deep sclerectomy 14 Retina and Arumi diamond knives 15 Step diamond knives 16-17 Diamond knives with micrometer for refractive surgery 18 Diamond knives for Kera Rings and Intacts implantation 19 Multifunctional diamond knife 20-21 Setting the micrometer dial and handling instructions for the micrometer knives 22 ISO-Certificates 23 Swiss Quality production 24-25 Description of use of Meyco diamond knives 26-27 Cover Story: Are they the clear choice for clear corneal cataract surgery? 28-30 Meyco customer service 31 Free hand diamond knives with straight handle for 45° & 30° & 20° Single edge cataract surgery B L D A S order n° 1.50 3.50 0.20 45° 1.50 ME-100 1.50 3.50 0.20 30° 2.60 ME-102 1.00 3.50 0.20 45° 1.00 ME-105 1.00 3.50 0.20 30° 1.70 ME-106 1.00 3.50 0.20 20° 1.00 ME-107 0.80 3.50 0.20 45° 0.80 ME-109 ME-605 Single lancet B L D A S order n° 1.50 3.50 0.20 40° 2.00 ME-110 1.00 3.50 0.20 40° 1.30 ME-111 Lancet diamonds are the ideal 0.80 3.50 0.20 40° 1.00 ME-113 blades for side port incisions.
    [Show full text]
  • Getting the Most out of Your Diamond Tools
    UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc. 25345 Avenue Stanford, Unit 211 Valencia, CA 91355 USA Phone: (661) 257-2288 Fax: (661) 257-3833 www.ukam.com Getting the most out of your Diamond Tools Optimum diamond tool performance can be achieved through the proper use and basic care of your diamond tool, before and during its use. HOW DIAMOND TOOLS WORK This instruction manual has been written UKAM Industrial Superhard Tools manufactures tool help you get the most out of your precision diamond tools for a large variety of diamond tool investment. applications, materials, and industries In order to help you select the right Metal Bonded Diamond Tools are “impregnated” with diamond tool for your application, our diamonds. This means that selected diamonds are staff may ask you many questions about mixed and sintered with specific metal alloys to achieve the material you wish to machine. These the best cutting performance possible on any materials questions will specifically focus on: such as sapphire, glass, granite, tile and etc. The metal bond surrounding the diamonds must wear away to a.) material being machined continuously keep re-exposing the diamonds for the b.) how you plan to machine it diamond tool to continue cutting. c.) equipment you will be using If the tool becomes overheated, the metal bond does not wear away, instead it “glazes over” the diamond. d.) RPM of that machine Hence coating or covering the diamond. The metal bond then becomes the cutting agent rather than the e.) Coolants used diamond. Generating more heat.
    [Show full text]
  • Edmar Diamond Blade Training Manual 2 What Is a Diamond Blade?
    DIAMOND BLADE BASICS Edmar Diamond Blade Training Manual 2 What is a Diamond Blade? Continuous Turbo Segmented Edmar Diamond Blade Training Manual 3 What is a Diamond Blade? The blade core is a precision-made steel disc which may or may not have slots. Blade cores are tensioned so that the blade will run straight at the proper cutting speed. Proper tension also allows the blade to remain flexible enough to bend slightly under cutting pressure and then go back to it’s original position. Diamond segments or rims are made up of a mixture of diamonds and metal powders. The diamonds used in bits and blades are man-made (synthetic) and are carefully selected for their shape, quality, friability, and size. These carefully selected diamonds are then mixed with a powder consisting of metals such as cobalt, iron, tungsten, carbide, copper, bronze, and other materials. This mixture is then molded into shape and then heated at temperatures from 1700˚ to 2300˚ under pressure to form a solid metal part called the “bond” or “matrix.” The segment or rim is slightly wider than the blade core. This side clearance allows the cutting edge to penetrate the material being cut without the steel dragging against the sides of the cut. After the blade is assembled it is “opened,” “broken in,” or, “dressed” by grinding the edge concentric to the center. This exposes the diamonds that will be doing the work and establishes the cutting direction as noted by the direction of the arrow stamped into the blade. Edmar Diamond Blade Training Manual 4 Edmar Diamond Blade
    [Show full text]
  • Vancouver INTERTECH 2003 Pre-Alloyed Sintered Bond Powder Development Efficient Wheel Dressing Promotes Efficient Cutting Tool Production Superabrasives
    REGISTER2003 SUPERABRASIVES NOW for INTERTECH 2003, RESOURCE the BIGGEST DIRECTORYEVENT of 2003! SPRING 2003 $8.00 Non-Ferrous Applications & Technology FALL/WINTER 2002 $8.00 Vancouver INTERTECH 2003 Pre-Alloyed Sintered Bond Powder Development Efficient Wheel Dressing Promotes Efficient Cutting Tool Production Superabrasives Resource Directory Permit No. 6159 No. Permit •Companies by Cincinnati, OH Cincinnati, Classification AID P U.S. POSTAGE U.S. • Products & Services RR STD PRSRT ABC offers a complete range of industrial diamond and CBN products. ABC specializes in customizing our products to meet individual requirements. Contact: ABC Superabrasives 6650 Park of Commerce Blvd. Boca Raton, FL 33487 Tel: (561) 995-7900 • Fax: (561) 995-7979 E-Mail: [email protected] ISO 9001:2000 Registered feature articles 6 INTERTECH 2003! 10 Pre-Alloyed Sintered Bond Powder Development 20 Efficient Wheel Dressing Promotes Efficient Cutting Tool Production 24 Superabrasives Resource Directory of 6 Companies & Organizations by departments Classification 4 A Finer Point of View 37 Calendar of Events 8 Editorial 9 Membership 39 Superabrasives Resource Directory of Application Products & Services by Company 18 Announcements & Products 19 News & Notes 6 18 24 56 Checklist of things to do ... 10 20 COVER PHOTO Courtesy of ABmart..................................................... 28 Lands Superabrasives Co. .................... 15 Vancouver Bureau of Tourism ABC Superabrasives ............................ IFC Lieber & Solow Co. .............................
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • ADT Compiled Catalogue
    Product Catalog Salt Lake City, Utah USA (877) 974-0403 November 2015 Table of Contents Table of Contents CP3 Triple Tube Conversion………………..……………………………………………….…. B83 A. Bits CP3 Quadlatch Overshot……………………………………………………………………...… B85 Bit Introduction……………………………………………………………………..…. A1 Standard Core Bit Dimensions……………………………………………………… A2 NXB Core Barrel……………………………………………………………………….…….. B87 Impregnated…………………………………………………………………….…….. A3 NXB Quadlatch Overshot……………………………………………………………………..… B89 Surface Set………………………………………………………………………..….. A4 HXB Core Barrel……………………………………………………………………….…….. B91 Amdril PDC……………………………………………………………………….…… A5 HXB Quadlatch Overshot……………………………………………………………………..… B93 Reamer Shells………………………………………………………………..………. A6 Casing & Rod Shoes…………………………………………………………...……. A6 4-5/8x3.00 Core Barrel…………………………………………………………………….... B95 4-5/8x3.00 Quadlatch Overshot……………………………………………………………...… B97 5-3/4x4.00 Core Barrel…………………………………………………………………..….. B99 B. Wireline Core Barrels 5-3/4x4.00 Optional Equipment……………………………………………………………….… B101 Wireline Core Barrel Introduction……………………………………………………. B1 - B4 8 x 5-7/8 Core Barrel……………………………………………………………………..….. B103 8 x 5-7/8 Optional Equipment………………………………………………………………...… B105 NWL Core Barrel…………………………………………………….………………... B5 NWL Knuckle Head and Easy Lock Overshots………………………………………... B7 - B10 N2WL Core Barrel…………………………………………………………………….. B11 C. Conventional Core Barrels N2WL Knuckle Head and Easy Lock Overshots………………………………………. B13 - B16 Conventional Core Barrel Introduction…………………………………………………….. C1 - C2 N3WL
    [Show full text]
  • Technological Institute for Superhard and Novel Carbon Materials” (TISNCM)
    General information about Federal State Institution “Technological Institute for Superhard and Novel Carbon Materials” (TISNCM). The Institute was established in 1995 as the Scientific Technological Centre “Superhard Materials” (STC SHM). In 1998 the Institute was reorganized as the Federal State Institution “Technological Institute for Superhard and Novel Carbon Materials” (FSI TISNCM). FSI TISNCM is administrated by the Federal Agency of Science and Innovations of the Ministry of Education and Science of the Russian Federation. Scientific Research Departments at FSI TISNCM 1. Department of Structural Research • Laboratory of Spectral Research • Laboratory of Electron Microscopy 2. Department of New Superhard Material Synthesis • Laboratory of Nanostructured Metal-Carbon Materials 3. Department of Single Crystal Growth • Laboratory of Cubic Boron Nitride Synthesis • Laboratory of CVD Diamond Growth 4. Department of Physical Properties of Nanostructures • Laboratory of Gas and Thermal Treatment of Carbon Materials 5. Department of Physical and Mechanical Properties Research • Laboratory of Scanning Probe Microscopy • Laboratory of Physical and Chemical Measurements 6. Department of Scientific-Information Research of Superhard and Novel Carbon Materials 7. Department of Chemical Technologies and Nanomaterials 8. MIPT Department “Physics and Chemistry of Nanostructures” The subdivisions within the Institute are grouped in the following divisions: • FSI TISNCM Center of Collective Use (CCU) of Scientific Equipment “Research of Nanostructured,
    [Show full text]
  • Live the Trade
    The OX Book 2019 Live the Trade Edition 1 Manager Your Account Your Manager Your Customer Care Your Our story OX Tools is a world leading supplier of hand tools, diamond tools and safety products. Developed and proven in Australia over the past 44 years, our tools are recognized as tough, dynamic and different across the globe. As a leading supplier of professional tools we sell direct to the merchants, providing them with excellent service, innovative merchandising solutions and a very powerful brand. FOLLOW US… OXTools USA OXTools USA OXTools USA Issue date: 2018 Subject to availability and OX Tools USA terms and conditions of sale. Page 2 www.oxtools.com Contents Diamond Tools Layout & Measuring Tools Plastering / EIFS/ Drywall Tools pages 10–35 pages 36–43 pages 44–50 General Hand Tools Striking & Demolition Tools Safety & Storage pages 51–53 pages 54–61 pages 62–69 Site Tools Concreting Tools Bricklaying Tools pages 70–73 pages 74–83 pages 84–89 Tiling Tools Merchandising Diamond Tool Product Training & pages 90–99 pages 100–105 Trouble Shooting Guide pages 106–118 The OX Book 2019 Edition 1 Page 3 18 offices, 15 countries, one OX UK - OX Australia - OX USA - Europe/Middle East Australasia/Asia Pacific North America - France - New Zealand – Chicago - Spain - Baltimore - Sweden – Canada - The Netherlands - Malta - Italy - Finland - Saudi Arabia - Argentina - United Arab Emirates Page 4 www.oxtools.com World leading technology… Look at the detail of the products – the strength and thickness of the steel, the perfect weight & balance, the positioning of the handles – guaranteed better than the rest! Packed with innovation, OX tools raise the benchmark for tool performance to unprecedented new levels.
    [Show full text]
  • Wood Grinding Tools the New Diamond Tool Series for Wood Grinding
    Wood grinding tools The new diamond tool series for wood grinding The SL-Series is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result. EZ SL 30 Wood - 30 grit Item no: 598887001 Quantity per box: 3 pcs The SL 30 Wood tool is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result. EZ SL 50 Wood - 50 grit Item no: 598887101 Quantity per box: 3 pcs The SL 50 Wood tool is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result.
    [Show full text]