R

Model SR4200 User Guide

AV Surround Receiver ENGLISH ITALIANO WARRANTY GARANZIA For warranty information, contact your local distributor. L’apparecchio è coperto da una garanzia di buon funzionamento della RETAIN YOUR PURCHASE RECEIPT durata di un anno, o del periodo previsto dalla legge, a partire dalla data Your purchase receipt is your permanent record of a valuable purchase. di acquisto comprovata da un documento attestante il nominativo del It should be kept in a safe place to be referred to as necessary for Rivenditore e la data di vendita. La garanzia sarà prestata con la insurance purposes or when corresponding with Marantz. sostituzione o la riparazione gratuita delle parti difettose. IMPORTANT Non sono coperti da garanzia difetti derivanti da uso improprio, errata When seeking warranty service, it is the responsibility of the consumer installazione, manutenzione effettuata da personale non autorizzato o, to establish proof and date of purchase. Your purchase receipt or in- comunque, da circostanze che non possano riferirsi a difetti di voice is adequate for such proof. funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti di FOR U.K. ONLY alimentazione. This undertaking is in addition to a consumer's statutory rights and does Gli apparecchi verranno riparati presso i nostri Centri di Assistenza not affect those rights in any way. Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente. La casa costruttrice declina ogni responsabilità per danni diretti o indiretti FRANÇAIS provocati dalla inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate nel presente manuale o per guasti dovuti ad GARANTIE uso continuato a fini professionali. Pour des informations sur la garantie, contacter le distributeur local Marantz. PORTUGUÊS CONSERVER L'ATTESTATION D'ACHAT L'attestation d'achat est la preuve permanente d'un achat de valeur. La GARANTIA conserver en lieu sur pour s'y reporter aux fins d'obtention d'une Para informações sobre a garantia, contactar o distribuidor Marantz lo- couverture d'assurance ou dans le cadre de correspondances avec cal. Marantz. GUARDAR O RECIBO DE COMPRA IMPORTANT O recibo é o registo permanente da compra que fez. Deve ser guardado Pour l'obtention d'un service couvert par la garantie, il incombe au cli- num local seguro, para ser apresentado em questões relacionadas com ent d'établir la preuve de l'achat et d'en corroborer la date. Le reçu ou la o seguro ou para quando tiver de contactar a Marantz. facture constituent des preuves suffisantes. IMPORTANTE Quando procurar assisténcia técnica ao abrigo da garantia, é da DEUTSCH responsabilidade do consumidor estabelecer a prova e data de compra. O recibe é prova adequada. GARANTIE Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler. SVENSKA HEBEN SIE IHRE QUITTING GUT AUF Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen GARANTI Einkauf Das Aufbewahren der Quittung ist wichtig, da die darin För information om garantin, kontakta Marantz lokalagent. enthaltenen Angaben für Versicherungswecke oder bei Korrespondenz SPAR KVITTOT mit Marantz angeführt werden müssen. Kvittot är ett inköpsbevis på en värdefull vara. Det skall förvaras säkert WICHTIG! och hänvisas till vid försäkringsfall eller vidkorrespondens mod Marantz. Bei Garantiefragen muß der Kunde eine Kaufunterlage mit Kaufdatum VIKTIGT vorlegen. Ihren Quittung oder Rechnung ist als Unterlage ausreichend. Fö att garantin skall gälla är det kundens sak att framställa bevis och datum om köpet. Kvitto eller faktura är tillräokligt bevis fö detta. NEDERLANDS DANSK GARANTIE Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz. GARANTI UW KWITANTIE, KASSABON E.D. BEWAREN Henvend dem til Deres MARANTZ-forhandler angående inrformation om Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een garantien. waardevol artikel en dienen op een veilige plaats bewaard te worden GEM DERES KVITTERING voor evt, verwijzing bijv, in verbend met verzekering of bij correspondentie Deres købskvittering er Deres varige bevis på et dyrt køb. Den bør met Marantz. gemmes godt og anvendes som bevis, hvis De vil tegne en forsikring, BELANGRIJK eller hvis De kommunikerer med Marantz. Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de VIGTIGT consument een gedateerd bewijs van aankoop te tonen. Uw kassabon Det påhviler forbrugeren at skaffe bevis for købet og købsdatoen, hvis of factuurzijn voldoende bewijs. han eller hun ønsker garantiservice. Deres købskvittering eller faktura er et fuldgyldigt bevis herpå. ESPAÑOL GARANTIA Para obtener información acerca de la garantia póngase en contacto con su distribuidor Marantz. GUARDE SU RECIBO DE COMPRA Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz. IMPORTANTE Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuá¥do efectuó la compra. En este caso, su recibo de compra será la prueba apropiada. i CE MARKING

English The SR4200 is in conformity with the EMC directive and low-voltage directive. Français Le SR4200 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR4200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands De SR4200 voldoet aan de EMC eisen en de vereisten voor laag-voltage. Español El SR4200 está de acuerdo con las normas EMC y las relacionadas con baja tensión. Italiano Il SR4200 è conforme alle direttive CEE ed a quelle per i bassi voltaggi. Português O SR4200 conforma com as diretrizes EMC e de baixa voltagem. Svenska SR4200 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning. Dansk Model SR4200 er i overensstemmelse med EMC-direktiveet og direktivet om lavspænding.

English To ventilate the unit, do not install the unit in a rack or bookshelf, and Italiano note the followings. Perch é l'unità possa essere sempre ben ventilata, non installarla in - Do not touch the top of the enclosure during operation. scaffali o librerie e tenere presente quanto segue. - Do not block the openings in the enclosure during operation. - Non toccare la parte superiore del rivestimento durante il - Do not insert objects beneath the unit. funzionamento. - Do not block the ventilation slots at the top of the unit. - Non bloccare le aperture sul rivestimento durante il funzionamento. Do not place anything about 1 meter above the top panel. - Non inserire oggetti al di sotto dell'unità. - Make a space of about 0.2 meter around the unit. - Non bloccare le fessure di ventilazione sopra l'unità. Non posare nulla per circa un metro sopra il pannello superiore. - Lasciare 0,2 metro liberi tutto intorno l'unità. Français Pour que l'appareil puisse être correctement ventilé, ne pas l'installer Português dans un meuble ou une bibliothèque et respecter ce qui suit. Para ventilar o aparelho, não instalá-lo dentro duma estante ou algo - Ne pas toucher le dessus du coffret. similar, e observar as seguintes recomendações: - Ne pas obstruer les ouïes de ventilation du coffret pendant le - Não tocar a parte superior do aparelho durante a operação. fonctionnement. - Não bloquear as aberturas do aparelho durante a operação. - Ne placer aucun objet sous l'appareil. - Não insertar objectos debaixo do aparelho. - Ne pas obstruer les ouães de ventilation du panneau supérieur. Ne - Não bloquear as aberturas de ventilação na parte de cima do placer aucun objet à moins d'un mètre environ du panneau supérieur. aparelho. Deixar um espaço completamente livre de cerca de 1 metro - Veiller à ce qu'aucun objet ne soit à moins de 0,2 mètre des côtés de acima do painel superior. l'appareil. - Deixar um espaço de cerca de 0,2 metro ao redor do aparelho.

Deutsch Um eine einwandfreie Belüftung des Geräts zu gewährleisten, darf das Svenska Gerät nicht in einem Gestell oder Bücherregal aufgestellt werden; die För att ventilera enheten, ställ den inte i ett ställ eller bokhylla och tänk folgenden Punkte sind besonders zu beachten: på följande. - Während des Betriebs das Oberteil des Gehäuses nicht berühren. - Vidrör inte ytterhöljets ovansida under pågående drift. - Während des Betriebs die Öffnungen im Gehäuse nicht blockieren. - Blockera inte öppningarna i ytterhöljet under pågående drift. - Keine Gegenstände in das Gerät einführen. - Stick inte in föremål under enheten. - Die Belüftungsschlitze an der Oberseite des Geräts dürfen nicht - Blockera inte ventialtionshålen ovanpå enheten. blockiert werden. Darauf achten, daß über dem Gerät ein Freiraum Placera inte någonting närmare än 1 meter ovanför apparaten eller von mindestens 1 meter vorhanden ist. enheten. - Auf allen Geräteseiten muß ein Zwischenraum von ungefähr 0,2 meter - Se till att det finns omkring 0,2 meter fri plats runt omkring enheten. vorhanden sein.

Nederlands Installeer het toestel niet in een rek of boekenkast waar de ventilatie Dansk mogelijk wordt gehinderd. Let tevens op de volgende punten: Anbring ikke apparatet i et rack eller en boghylde, da dette kan bloke - Raak de bovenkant van het toestel niet aan als het in gebruik is. luftcirkulationen omkring apparatet. Iagttag ligeledes følgende: - Blokkeer de openingen van het toestel niet als het in gebruik is. - Berør ikke oversiden af kabinettet under anvendelsen. - Plaats geen onderwerpen onder het toestel. - Bloker ikke åbningerne i kabinettet under anvendelsen. - Blokkeer de ventilatie-openingen aan de bovenkant van het toestel - Stik ikke genstande ind under apparatet. niet. Zorg dat er tenminste 1 meter vrije ruimte boven het toestel is. - Bloker ikke ventilationsåbningerne ovenpå apparatet. - Zorg dat er 0,2 meter vrije ruimte rond het toestel is. Anbring ikke noget nærmere end 1 m over apparatets overside, - Sørg for, at der er et frit område på omkring 0,2 m omkring apparatet. Español Para ventilar la unidad no la instale en una estantería ni estante para libros, y tenga en cuenta lo siguiente: - No toque la parte superior de la caja durante el funcionamiento. - No tape las ranuras en la caja durante el funcionamiento - No ponga objetos debajo de la unidad. - No tape las ranuras de ventilación de la parte superior de la unidad. No ponga nada a menos de 1 metro por encima del panel superior. - Deje un espacio de unos 0,2 metro alrededor de la unidad.

ii AHIBCD EF G J K

VIDEO S-VIDEO

ANTENNA FM(75 ) GND AM IN OUT IN MONITOR IN OUT IN OUT IN IN MONITOR OUT VCR1 DVD OUT

DIG-1 DIG-2 DIG-3 DIG-4 COAXIAL OPUTICAL L

R

CD TAPE CDR/MD DSS/VCR2 VCR1 DVD TV OPTICAL COAXIAL IN IN OUT IN OUT IN OUT IN OUT IN IN INPUT OUTPUT AUDIO DIGITAL IN/OUT

REMOTE CONTROL PRE OUT SPEAKER SYSTEMS (IMPEDANCE 6 OHMS) AC OUTLET (230V 50Hz) MODEL NO. SR4200

– – FRONT SURR. CENTER

IN L

+ + OUT R

FRONT SURR. SUB WOOFER RLSURR. CENTER R FRONT L SWITCHED 100W MAX

R QP O N M L

POWER z x

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD c

AUX AMP

TV MAIN Attenuate Surround mode FM stereo Sleep timer Memory ¤4 VOL. SLEEP MUTE VOL. v ¤3 b Night mode Tuned RDS mode Stereo mode OSD MENU

¤2 n NIGHT DIGITAL PRO LOGIC TUNED STEREO RDS PTY RT M MEMO STEREO DSP VIRTUAL OK ATT PRESET CH. m MOVIE MUSIC HALL MATRIX GAME kHz ¤1 PEAK MHz SETUP/ MENU OFF ANALOG PCM AUTO mS T.TONE , ¤0 S-DIRECT AUTO DTS DISPLAY OFF 1 2 3 ⁄9 NIGHT CS5.1 6.1 DSP 4 5 6 Display off ⁄8 DIMMER 6-STEREO 2CH 7CH-DIR . 7 8 9 Peak CLEAR MEMO A/D P.SCAN ⁄0 ⁄7 0 Preset channel ⁄6 CHANNEL/SKIP ⁄1

⁄5 BASS TREBLE TUNE/SEARCH

⁄4 MODE DISP./RDS F.DIRECT ⁄2

+/A /ANT —/B /VCR ATT. PTY

DISC/DECK ⁄3

SYSTEM REMOTE CONTROLLER RC5200SR !1 !2 !3 !4!5 !6 ey u io!0r

AV SURROUND RECEIVER SR4200

SURROUND VOLUME

NIGHT DIGITAL PRO LOGIC DTS TUNED STEREO RDS PTY RT RT TA TP TAPE M MEMO 3 STEREO AC-3 PCM THEATER ATT HALL STADIUM DISCO CHURCH DELAY T.PRESET CH. VCR 1 REC SPK A B kHz PEAK DVD LD AUX SOURCE MHz mS DOWN UP

DISPLAY OFF

CLEAR MEMORY TUNING/PRESET F/P MODE

A/D S-DIRECT SLEEP DIMMER MUTE

STANDBY

POWER ON/OFF PHONES TV DVD VCR1 DSS/VCR2 CDR/MD TAPE CD TUNER

qw t

iii VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS VIDEO SYSTEM CONNECTIONS FOR VIDEO COMPONENTS DVD PLAYER TV MONITOR TV

AUDIO VIDEO S-VIDEO OUT OUT OUT VIDEO S-VIDEO IN IN CVBS LR DIGITAL AUDIO VIDEO S-VIDEO OUT OUT OUT OUT

LR

VIDEO S-VIDEO

ANTENNA FM(75Ω) GND AM IN OUT IN MONITOR IN OUT IN OUT IN IN MONITOR OUT VCR1 DVD OUT

DIG-1 DIG-2 DIG-3 DIG-4 COAXIAL OPUTICAL L

R

CD TAPE CDR/MD DSS/VCR2 VCR1 DVD TV OPTICAL COAXIAL IN IN OUT IN OUT IN OUT IN OUT IN IN INPUT OUTPUT Connect the provided AUDIO DIGITAL IN/OUT detachable power cord To household REMOTE CONTROL PRE OUT SPEAKER SYSTEMS (IMPEDANCE 6 OHMS) AC OUTLET (230V 50Hz) power outlet MODEL NO. SR4200

– – FRONT SURR. CENTER

IN L

+ + OUT R

FRONT SURR. SUB WOOFER RLSURR. CENTER R FRONT L SWITCHED 100W MAX

DIGITAL AUDIO AUDIO VIDEO AUDIO AUDIO VIDEO S-VIDEO OUT OUT IN OUT IN OUT IN OUT IN OUT IN

LR LR LR LR SATELLITE TUNER or VCR2 VCR iv AUDIO SYSTEM CONNECTIONS FOR AUDIO COMPONENTS AM EXTERNAL ANTENNA AM LOOP ANTENNA CD RECORDER/MD PLAYER MD PLAYER CD Recorder Assemble the AM loop antenna as shown in the figure before use

IN OUT L L DIGITAL R R DIGITAL INPUT INPUT

DIGITAL OUTPUT FM EXTERNAL ANTENNA FM LEAD TYPE ANTENNA

VIDEO S-VIDEO

ANTENNA FM(75Ω) GND AM IN OUT IN MONITOR IN OUT IN OUT IN IN MONITOR OUT VCR1 DVD OUT

DIG-1 DIG-2 DIG-3 DIG-4 COAXIAL OPUTICAL L

OUTPUT R CD TAPE CDR/MD DSS/VCR2 VCR1 DVD TV OPTICAL COAXIAL IN IN OUT IN OUT IN OUT IN OUT IN IN INPUT OUTPUT L AUDIO DIGITAL IN/OUT

REMOTE CONTROL PRE OUT SPEAKER SYSTEMS (IMPEDANCE 6 OHMS) AC OUTLET (230V 50Hz) R MODEL NO. SR4200

DIGITAL – – OUTPUT FRONT SURR. CENTER

IN L

+ + OUT R

FRONT SURR. SUB WOOFER RLSURR. CENTER R FRONT L SWITCHED 100W MAX

CD PLAYER

To a component with REMOTE (Marantz RC-5 D-BUS) jacks Refer to "CONNECTION FOR A SUBWOOFER" (Page 6) NORMAL CENTER INPUT SPEAKER (L) (R) INVERT OUTPUT IN OUT L L SUBWOOFER R R

(L) (R) SURROUND SPEAKER SUBWOOFER TAPE DECK SPEAKER SYSTEM (MA6100) v TABLE OF CONTENTS

FOREWORD ...... 2 INTRODUCTION...... 3 DESCRIPTION...... 3 FEATURES ...... 3 ENGLISH FRONT PANEL FEATURES ...... 4 REAR PANEL CONNECTIONS...... 5 REMOTE CONTROL OPERATION ...... 7 OPERATION ...... 7 FUNCTION AND OPERATION...... 7 PROGRAMMING THE REMOTE CONTROLLER ...... 8 OPERATION OF REMOTE CONTROL UNIT ...... 9 SET-UP ...... 10 MENU FUNCTION ...... 10 MENU STRUCTURE ...... 10 SYSTEM SETUP ...... 11 SPEAKERS SETUP ...... 11 TEST MODE ...... 12 BASIC OPERATION ...... 13 LISTENING TO THE TUNER ...... 13 RDS OPERATION ...... 14 PLAYBACK OPERATION ...... 15 SETTING THE SLEEP TIMER ...... 15 SURROUND MODES ...... 16 TROUBLE SHOOTING ...... 18

1 PRECAUTIONS ENGLISH FOREWORD The following precautions should be taken when operating the This section must be read before any connection is made to the mains equipment. supply.

WARNINGS GENERAL PRECAUTIONS When siting the equipment ensure that: Do not expose the equipment to rain or moisture. — the ventilation holes are not covered; Do not remove the cover from the equipment. — air is allowed to circulate freely around the equipment Do not push anything inside the equipment through the — it is on a vibration free-surface; ventilation holes. — it will not be exposed to interference from an external source; Do not handle the mains lead with wet hands. — it will not be exposed to excessive heat, cold, moisture or dust; — it will not be exposed to direct sunlight; — it will not be exposed to electrostatic discharges Never place heavy objects on the equipment. EQUIPMENT MAINS WORKING SETTING If a foreign body or water does enter the equipment, contact your Your Marantz product has been prepared to comply with the nearest dealer or service centre. household power and safety requirements that exist in your area. Do not pull out the plug by pulling on the mains lead, hold the plug. SR4200 can be powered by 230 V AC only. It is advisable when leaving the house, or during a thunderstorm, to disconnect the equipment from the mains supply.

IMPORTANT: (For UK version) This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: PRECAUTIONS IN CONNECTION 1. Remove fuse cover and fuse. • Be sure to unplug the power cable from the AC outlet or turn off the 2. Fix new fuse which should be a BS1362 13A, A.S.T.A. or BSI POWER switch before proceeding with any connection. approved type. • Connect one cable at a time observing the “input” and “output”. 3. Refit the fuse cover. This will avoid any cross connection between channels and signal If the fitted plug is not suitable for your socket outlets, it should be cut inputs and outputs. off and an appropriate plug fitted in its place. • Insert the plugs securely. Incomplete connection may result in If the mains plug contains a fuse, this should have a value of 13A. If a noise. plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. • Prior to connecting other audio and video equipment to the SR4200, please read their owner’s manuals. Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. INSTALLATION How to connect a plug If this unit or another electronic device incorporating a microcomputer The wires in the mains lead are coloured in accordance with the is used at the same time with the tuner or television, picture following code: disturbance or noise may occur. In such a case, install the unit BLUE—“NEUTRAL” (“N”) according to the following guide points. BROWN—“LIVE” (“L”) • Separate the unit as far as possible from the television. 1. The BLUE wire must be connected to the terminal which is marked • Place the antenna wire for the tuner or TV apart from the power cable and audio and video connection cables of this unit. with the letter “N” or coloured BLACK. • Since the phenomenon is likely to occur when using an indoor 2. The BROWN wire must be connected to the terminal which is marked antenna and/or 300-ohm feeder wire, we recommend using an with the letter “L” or coloured RED. outdoor antenna and 75-ohm coaxial cable. 3. Do not connect either wires to the earth terminal in the plug which is marked by the letter “E” or by the safety earth symbol or coloured green or green-and-yellow. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead — not simply over the two wires.

COPYRIGHT Recording and playback of any material may require consent. For further information refer to the following: — Copyright Act 1956 — Dramatic and Musical Performers Act 1958 — Performers Protection Acts 1963 and 1972 — any subsequent statutory enactments and orders

ABOUT THIS USER GUIDE Refer to the figures on page iii of this user guide. The numbers on the figures correspond to those in the text. All references to the connections and controls that are printed in BOLD type are as they appear on the unit.

2 INTRODUCTION FEATURES Thank you for purchasing the Marantz SR4200 DTS/Dolby Digital • Dolby Digital and DTS surround sound decoding, plus Dolby Pro Surround receiver. Logic II decoding and a variety of additional surround modes. This remarkable component has been engineered to provide you with • 96 kHz/ 24 bit decoding for highest possible fidelity and bandwidth, many years of home theater enjoyment. and high-resolution playback of 96 kHz/ 24 bit PCM audio sources. Please take a few minutes to read this manual thoroughly before you • 70 watts to each of the five main channels; the power amp section connect and operate the SR4200. features advanced, premium high-storage power supply capacitors, ENGLISH As there are a number of connection and configurations options, you and fully discrete output stages housed in cast aluminum heat are encouraged to discuss your own particular home theater setup sinks. with your Marantz A/V specialist dealer. • 5.1 channel pre-amp outputs for connection to external components such as a subwoofer and external power . • 2 Digital outputs for connection to CD-R or MD. • High-quality AM (MW/LW) /FM tuner with 50 station presets. • Source Direct switch bypasses, tone controls and bass management DESCRIPTION for purest sound quality. • S-video and composite video switch. • Radio Data System (RDS) provides information on FM broadcasts.

DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality, discrete multi-channel digital sound to both movies and music. DTS is a multi-channel sound system designed to create full range digital sound reproduction. The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy of the studio master recordings to neighborhood and home theaters. Now, every moviegoer can hear the sound exactly as the moviemaker intended. DTS can be enjoyed in the home for either movies or music on DVD’s, LD’s and CD’s. ] Dolby Digital lets you enjoy Digital TV, Digital Satellite as well as DVD, LD software in digital surround, which is the next step above Dolby Pro Logic. In Comparison with Dolby Pro Logic, Dolby Digital can provide separate left surround and right surround channels, for more precise localization of sound and a more convincing, realistic ambience. And, with Dolby Digital all five main channels can be full ranged and a subwoofer can be added to each channel, if desired. By providing up to 5.1 channels of digital audio independently. Dolby Digital lets you enjoy better sound quality and more powerful presence than conventional Dolby Surround.

Pro Logic II, the next generation in Dolby Surround Pro Logic technology, brings the excitement of surround sound to any existing stereo mix, while making existing Dolby Surround mixes sound more like discrete 5.1-channel surround sound. It works with CDs, VHS tapes and TV shows, and MP3 files and radio broadcasts-converting all of these source to surround sound, without the artifacts by other matrix-decoding technologies.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

3 i ENGLISH FRONT PANEL FEATURES (SEE SLEEP button PAGE iii.) Set the sleep timer function with this button . o DIMMER (Display off) button q POWER switch and STANDBY indicator When this button is pressed once, the display is dimmed. Press the button to turn the power ON, and press again to turn it OFF. When this button is pressed twice, the display is turned off and the If the POWER switch is in the ON position, the power of this unit can “DISPLAY OFF” indicator lights up. be turned ON/OFF by pressing the POWER button on the remote Press this button again to turn the display ON again. control unit. When this unit is in the standby mode with the POWER switch set to !0 MUTE button the ON position, pressing one of the FUNCTION SELECTOR buttons Press this button to mute the output to the speakers. Press it again to also allows to turn the power on. return to the previous volume level. The STANDBY indicator lights up when this unit is the standby mode (power OFF) by the remote control unit. !1 CLEAR button w PHONES jack for stereo headphones Press this button to cancel the station memory setting mode or preset scan tuning. Conventional dynamic headphones can be plugged in here. Notes: When using headphones, the surround mode is switched automati- !2 MEMORY button cally to STEREO and the sound from the speakers is muted. Press this button to enter the tuner preset memory numbers and The surround mode returns to the previous setting as soon as the station names. plug is removed from the jack. !3 TUNING / PRESET UP and DOWN buttons e SURROUND MODE Selector knob During reception of AM (MW/LW) or FM, you can scan the other When this knob is turned, the surround mode is switched in the frequencies or select another preset station pressing these buttons. following sequence. DOLBY DOLBY PLII DOLBY PLII AUTO DTS PROLOGIC MOVIE MUSIC !4 FREQUENCY / PRESET button During reception of AM (MW/LW) or FM, you can change the function STEREO MOVIE of the UP/DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.

VIRTUAL 5 STEREO GAME MATRIX HALL Note: !5 MODE button Not all modes will be present if an analog input is selected. Press this button to select the auto stereo mode or mono mode when the FM band is selected. The M indicator lights in the auto stereo r VOLUME control knob mode. Adjusts the overall sound level. Turning the control clockwise increases the sound level. !6 INFRARED SENSOR window This window receives infrared signals from the remote control unit. t FUNCTION SELECTOR buttons (AUDIO/ VIDEO) These buttons are used to select the sources. The video function selector, such as TV , DVD , VCR1 and DSS/ VCR2, selects video and audio simultaneously.

y A/D (Analog/Digital) SELECTOR button This is used to select between the analog and/or digital inputs. When analog input is selected, “ANALOG” will be shown in the display. Note: This button is not used for an input source that is not connected to a digital input.

u S. ( Source) DIRECT button When this button is pressed, the tone control circuit is bypassed as well as Bass Management. Notes: The surround mode is automatically switched to AUTO when the source direct function is turned on. Additionally, Speaker Configurations are fixed automatically as follow. Front speaker = Large Center speaker = Large Surround speaker = Large Sub woofer = Yes

4 REAR PANEL CONNECTIONS J S-video outputs VCR1 (SEE PAGE iii.) Connect each output terminals to S-video input (REC in) of your video All connections to the rear panel should be made with the entire recording equipment. system powered off. To avoid errors, it is advisable to connect one cable at a time between K the various components. AC INLET Connect to supplied AC cable, and connect to AC power outlet. ENGLISH SR4200 can be powered by 230V AC only. A Analog audio inputs for video source equipment L AC OUTLET TV, DVD, VCR1, and DSS/VCR2 Connect the power cables of components such as a DVD or CD player Connect each input to the audio outputs of your video source to this outlet. equipment. Caution: In order to avoid potential turn-off thumps, anything plugged in B Analog audio inputs here should be powered up BEFORE the SR4200 is turned on. CD, TAPE, and CD-R/MD Connect the audio outputs of your source components to the input M DIGITAL outputs jacks on the receiver. Optical and Coaxial Connect digital input of your digital recording equipment. C Analog audio outputs for audio source equipment N DIGITAL inputs TAPE and CD-R/MD Dig.1, 2 (Optical) and Dig.3 ,4 (Coaxial) Connect each output to the audio inputs (REC in) of your recording Connect each input to the digital output of your equipment. equipment. Use the system setup menu to assign digital input to appropriate source. (see page. 11) D Note : FM antenna terminal (75 ohms) Do not connect for LD player’s RF out, If you want to decode this Connect an external FM antenna with a coaxial cable, or a cable type of signal, an external demodulator must be used. network FM source. AM antenna and ground terminals o SPEAKER terminals Connect the supplied AM loop antenna. Use the terminals marked FRONT Left & Right speakers output terminals “AM” and “GND”. Connect to the front left & right speakers. The supplied AM loop antenna will provide good AM reception in most CENTER speaker output terminals areas. Connect to the center speaker. Position the loop antenna until you hear the best reception. SURROUND Left & Right speakers output terminals Connect to the surround (rear) left & right speakers. E Analog audio outputs for video source equipment P SUB WOOFER output jack Connect to the input jack(s) of the power amplifier for subwoofer VCR1, and DSS/VCR2 channel or powered subwoofer. Connect each output to the audio inputs (REC in) of your video recording equipment. Q PRE OUT jacks F Video inputs Jacks for Front - L/R, Center and Surround. Use these jacks for connection to an external power amplifier. TV, DVD, VCR1, and DSS/VCR2 Connect each input to the video outputs of your video source equipment. R REMOTE CONT. IN/OUT terminals Connect to a Marantz component equipped with remote control (RC- G Video outputs 5) terminals. VCR1, and DSS/VCR2 Connect each output to the video input (REC in) of your video recording equipment.

H TV MONI. (VIDEO/S-VIDEO) output jacks Connect the TV MONI jack to your TV’s video input (VIDEO IN) jack. You can connect your video equipment with S-VIDEO jacks if possible, or the composite VIDEO jacks. You must use the same type of connection from your video player into the receiver, and out of the receiver into your TV. Both must be composite video or both must be S-Video. You cannot convert a signal from one type to the other.

I S-video inputs DVD and VCR1 Connect each input to the S-video outputs of your video source equipment.

5 REMOTE CONTROL BUS CONNECTIONS ENGLISH This unit is equipped with a remote control function. By connecting this unit’s remote control jacks to a Marantz CD player or tape deck equipped with remote control (RC-5) jacks, it allows system remote control to operate. Connect RCEMOTE CONTROL OUT jack of SR4200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable.

Note: If a component equipped with remote control (RC-5) jacks has an INT/EXT switch on the rear panel, set the switch to EXT when using the system control function with SR4200.

(Connection example)

REMOTE CONTROL

REMOTE REMOTE CONT. CONT. IN IN IN

OUT OUT OUT

SR4200 rear panel CD player rear panel Tape deck panel

CONNECTION FOR A SUBWOOFER

VIDEO

ANTENNA FM(75‰) GND AM IN OUT IN OUT IN

L

R

CD TAPE CDR/MD DSS/VCR2 VCR1 DVD IN IN OUT IN OUT IN OUT IN OUT IN AUDIO Use this connection when using a sub-woofer speaker.

REMOTE CONTROL PRE OUT You can also connect a powered subwoofer.

FRONT SURR. CENTER Powered subwoofer

IN L

+ OUT R

FRONT SURR. SUB WOOFER RLSURR.

LINE IN REMOTE CONT.

INPUT IN

INVERT OUT OUTPUT Other Marantz VIDEO/ 5-13VDC Equipment (RC-5) EXT.CONT.IN

+

- Marantz MA6100 power amplifier SPEAKER SYSTEM 8 OHMS

Controlling the power ON/OFF of a power amplifier connected to Subwoofer speaker the SR4200 through Marantz remote control 1. Now the MA6100 can be turned ON / OFF in synchronism with the power ON / OFF of the SR4200.

Notes: n Be sure to connect the remote control bus before the procedure above.

6 REMOTE CONTROL OPERATION . Numeric buttons 1 to 9 (A, B, C ... Z, –) / Surround mode buttons Numeric buttons OPERATION These buttons are used to enter figures in the selection of a tuner preset The provided remote control unit is a universal remote controller. The station and station name preset or to set select a CD track number, etc. POWER button x, numeric buttons . and control buttons ⁄2 are used The functions of these buttons are dependent on the function button in common across different input source components. selected. ENGLISH The input source controlled with the remote control unit changes when Surround mode buttons (when AMP mode is selected) c one of the input selector buttons is pressed. These buttons are used to select the surround mode. • Example: To select the DVD as the input source and play the DVD player. Note: The 6-STEREO button is used to 5-stereo mode for SR4200. Press the DVD button c twice within 2 seconds. The CS5.1 and 6.1 buttons are unavailable for SR4200. The input selector of the SR4200 is switched to DVD and the remote control unit is set for control of the DVD player. ⁄0 P.SCAN (preset scan) button (when TUNER Press the PLAY button on the remote controller . mode is selected) When this button is pressed, SR4200 is turned to tuner (last memory) FUNCTION AND OPERATION and preset scan starts. z Transmitting indicator ⁄1 0 / A/D button Lights up during a button is pressed and an infrared signal is sending. 0 button This button is used to enter the number “0” x Main POWER buttons A/D button (when AMP mode is selected) Press to switch the power of the SR4200 ON or OFF after pressing the This is used to switch between the analog and digital inputs. AMP button c. ⁄2 CONTROL buttons c Input selector buttons/ FUNCTION These buttons are used when operating the CD player, TAPE deck, etc. The function of these buttons are dependent on the function button SELECTOR buttons (AUDIO/VIDEO selected. INPUT) For the controllable functions of each input function, please refer to Press one of these buttons once or twice to select a particular source following table. component. For example, to set the receiver to the DVD input, press TV VCR DVD DSS TUNER CD TAPE CDR MD the DVD button twice within 2 seconds. Note: CHANNEL/SKIP CH— PREV PREV CH— CH— PREV PREV PREV PREV

CDR/MD button is set CDR function at initial. To switch MD function, CHANNEL/SKIP CH+ NEXT NEXT CH+ CH+ NEXT NEXT NEXT NEXT press and hold down CDR/MD button and press 2 button .. To return CDR function, press and hold down CDR/MD button and TUNE/SERCH REWIND REWIND TUNING— REWIND REWIND REWIND REWIND . press 1 button . TUNE/SERCH FF FF TUNING+ FF FF FF FF REC REC REC REC v MAIN VOLUME UP ( ) /DOWN ( ) buttons MODE MODE DIRECTION Main volume control of the SR4200. The front, surround, center and CH CH RDS subwoofer channel volumes controlled by these buttons simultaneously. DSIP/RDS DISPLAY PAUSE PAUSEDISPLAY DISPLAY PAUSE PAUSE PAUSE PAUSE PLAY PLAYFRQ. PLAY PLAY PLAY PLAY F.DIRECT DIRECT b MUTE button +/A/ANT VIDEO TV/VCR DISC + DSS/VCRDISC + DECK A

Muting button of the SR4200. Press this button decrease the sound –/B/VCR VIDEO TV/VCRDISC + DSS/VCR DISC — DECK B temporarily . Press this button again to return to the previous sound. STOP STOPRDS STOP STOP STOP STOP PTY PTY n MENU button ⁄3 ATT (attenuater) button This button is used to enter the menu functions. Use the menu functions When the input signal is too high and the voice distorts even by throttling to setup SR4200. the SR4200 VOLUME control and PEAK indicator will light up, turn on this function. “ATT” is indicated when this function is activated m Cursor buttons ( , , , , OK) The input level is reduced. Attenuater is invalid for use with the output Use these button when operating the menu functions. signal of “REC OUT”. See page 10. ⁄4 TREBLE buttons , MENU OFF button These buttons are used to adjust the tone control of high frequency This button is used to return original display from menu functions. sound for left, center and right speaker.

⁄5 BASS buttons These buttons are used to adjust the tone control of low frequency sound for left, center right and subwoofer speaker.

⁄6 MEMO button Memory enable button for various preset functions.

7 ⁄7 ENGLISH CLEAR button PROGRAMMING THE REMOTE CONTROLLER This button is used to cancel for certain memory or programming The remote controller RC5200SR must be programmed to use the operations. codes for your appliances of different . This is done by keying in a 4-digit code or by scanning the codes until the correct one is found. ⁄8 DIMMER button We recommend to using the 4-digit code. This mode is faster and When this button is pressed once, the display is dimmed. more reliable. The code scanning method should be used only if you When this button is pressed twice, the display is turned off and the cannot find the code for one of your appliances. The codes are listed “DISPLAY OFF” indicator lights up. at the end of this book. Press this button again to turn on the display again. Important: ⁄9 NIGHT button Use the remote control buttons for programming, not the buttons of the receiver or other appliances. Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. PROGRAMMING WITH THE 4-DIGIT CODE However, the function is valid only for the case when the Dolby Digital 1. Press and hold down the function button c for the appliance signal is entered into OPTICAL or COAXIAL and data to compress the which should be controlled and press SETUP ¤1 until the indicator voice exists in the signal to be played back. z blinks twice.

2. Press the 4-digit code for appliance (codetable at the end of this ¤0 S- ( Source) DIRECT button book) When this button is pressed, the tone control circuit is bypassed as well as Bass Management. 3. When the procedure is successful, the indicator will blink twice. ¤1 SETUP / T.TONE button Test tone function is used for adjusting the balance between the volume Notes: levels of speaker channels. Press AMP button and press this button to If the indicator did not blink twice, then repeat steps 1 through 2 generate pink noise from each channel. Press the button again to stop and try entering the same code again. the pink noise generation.

SCANNING THE CODE TABLE ¤2 OSD button 1. Switch on the appliance which should be controlled. This button is not used for SR4200. 2. Press and hold down the function button c for appliance which ¤3 SLEEP (sleep timer) button should be controlled and press SETUP ¤1 until the indicator z blinking twice. This button is used for setting the sleep timer. It can be operated the same way as the button in unit. 3. Press the code 9 - 9 - 1. The indicator will blink twice. ¤4 TV VOLUME UP ( ) /DOWN ( ) buttons These buttons increase or decrease TV’s volume. 4. Aim the remote control at the appliance and slowly alternate between pressing POWER x and the function button c for the appliance.

5. Stop when the appliance turns off.

6. Press SETUP ¤1 once to lock in the code.

CHECKING THE CODE 1. Press and hold down the function button c for appliance which should be controlled and press SETUP ¤1 until the indicator z blinking twice.

2. Press the code 9 - 9 - 0. The indicator will blink twice.

3. To view the code for first digit, press 1 once. Wait 3 seconds, count the indicator blinks (e.g. 3 blinks = 3) and write down the number. Note: If a code digit is “0”, the indicator will not blink.

4. Repeat step 3 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

8 Once you have found and the codes for your various appliances, you may want to write them down here. OPERATION OF REMOTE CONTROL UNIT 1. Remote control TV The distance between the transmitter of the remote control unit and VCR the IR SENSOR of the SR4200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or DSS if there is an obstacle between them, remote control may not be possible. ENGLISH DVD Remote-controllable range CD SR4200 TAPE CDR MD

Approx. 5 m

60°

Remote control unit (RC5200SR)

2. Loading batteries The life of the batteries used with the remote control unit is about 4 months with normal use. Also be sure to replace batteries earlier when you notice that they are getting weak. (1) Remove the back cover.

(2) Insert the new batteries (AAA type) with correct (+) and (–) polarity.

(3) Close until it clicks.

9 ENGLISH SET-UP After all components are connected, initial setup must be performed.

MENU FUNCTION The SR4200 incorporates a menu function, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller.

MENU STRUCTURE SPK SIZE (Speaker size) FRONT F(ront)- LARGE

F(ront)- SMALL

CENTER C(enter)- LARGE

C(enter)- SMALL

C(enter)- NONE

SURROUND S(urround)- LARGE

S(urround)- SMALL

S(urround)- NONE

S (ub) - WOOFER S (ub) W(oofer) - YES

S (ub) W(oofer) - NO

SPK DIST (Speaker distance) FRONT F(ront) 3.0 M(eter)

CENTER C(enter) 3.0 M(eter)

SURROUND S(urround) 3.0 M(eter)

CH LEVEL (Channel Level) F(ront) L(eft) LEVEL F(ront) L(eft) 0 dB

C(enter) LEVEL C(enter) 0 dB

F(ront) R(ight) LEVEL F(ront) R(ight) 0 dB

R(ight) S(urround) LEVEL R(ight) S(urround) 0 dB

L(eft) S(urround) LEVEL L(eft) S(urround) 0 dB

S(ub) W(oofer) LEVEL S(ub) W(oofer) 0 dB

LFE ATT (LFE Attenuater) LFE OFF

LFE 0

LFE -10

DIG IN (Digital Input) DIGITAL1 D(igital)1/DVD

DIGITAL2 D(igital)2/CD

DIGITAL3 D(igital)3/CD-R

DIGITAL4 D(igital)4/DSS

10 SYSTEM SETUP FRONT : Select the type of front speakers with or button. 1. Press the AMP button c. 2. Press MENU button n display the menu.

CENTER : Select the type of center speaker with or button.

ENGLISH Choose a desired item in the contents with or button, and press the OK or button to select. Display will change to menu for each item. SURROUND: Select the type of surround speakers with or button. Note: If no operating continues for 1 minute or more, the setup menu is cancelled and the display will return to original.

S-WOOFER: Select the subwoofer speaker YES or NO with or SPEAKERS SETUP button. The home theater system you already have installed should function provided that there are left, center and right front speakers, left and right rear/surround speakers and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical Notes: or similar driver units. This will deliver smooth pans across the front This speaker size setup is not effective when the SOURCE- sound stage as the action moves from side to side. DIRECT is selected. Your center channel speaker is very important as over 80 % of the When the front speakers are set to SMALL, the setting for dialog from a typical motion picture emanates from the center channel. subwoofer is automatically set to YES. This subwoofer setting will It should possess similar sonic characteristics to the main speakers. not be shown on the display. Rear channel speakers need not be identical to the front channel speakers, but they should be of high quality. One of the benefits of both Dolby Digital (AC-3) and DTS is that surround channels are discrete full range, while they were frequency SPK DIST (Speaker distance) limited in earlier “Pro Logic’ type systems. Use this parameter to specify the distance of the speaker’s position Bass effects are an important part of home theater. For optimal from the listener. enjoyment a subwoofer should be used as it is optimized for low The delay time is automatically set according to these distances. frequency reproduction. If you have full range front speakers, however, they may be used in place of a subwoofer with proper setting UNITS:Select speaker with or button, and input each speaker’s of the switches in the menu system. distance with or button. When the input for each speaker’s distance has been finished, SUB WOOFER and press the OK or button.

LEFT RIGHT CENTER

SURROUND-L SURROUND-R Notes : Placement beyond that distance is beyond the range of the automatic time delay feature. The delay feature does not function in the SOURCE-DIRECT and decoding of 96 kHz sources. If possible, mount the surround speakers on the walls to the sides of the viewing area, 2-3 feet above seated viewers, firing straight across at each other. CH LEVEL (Channel level) Desired channels can be selected by pressing or button. SPK SIZE (Speake size) Each channel level will be adjusted by pressing or button. Only the usable channels which are determined depending on the This menu enters the information about which type of speakers will be SURROUND mode, and SPEAKER SETTING are displayed. used for each channel. In turn, these settings will determine which speakers receive low frequency information. For the purpose of establishing proper bass reproduction, use the LARGE settings if the speaker being used at any position is a traditional full-range that is capable of reproducing sound below 100 Hz and you are not using a subwoofer. Use the SMALL setting for smaller, frequency-limited speakers that are not able to reproduce sounds below 100Hz and you are using a subwoofer. Low frequencies will be diverted from the speaker to the subwoofer. Note that when “small” speakers are used it is advisable to install a separate subwoofer, especially if you wish to appreciate the full impact of a good home theater soundtrack. If the Surround speakers or Center speaker will not be used, set NONE for each speaker. The NONE setting will send the audio for the surround channels or Center channel to the front left/right speakers.

11 LFE ATT (LFE attenuater) ENGLISH Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB, -10 dB or OFF with or button. The level is ordinarily set to 0 dB. When use DTS Music source, LFE level is set to -10 dB.

DIG IN (Digital input) Four digital inputs can be assigned for the desired source. Use this menu to determine which source is connected to which input. Example; When the digital output of a DVD player is connected to Digital 4 (input jack) of the SR4200; 1. Select “DIG IN” with cursor buttons or and press the OK or button.

2. Select “DIGITAL4” with cursor buttons or and press the OK or button.

3. Select “D4/DVD” with cursor buttons or and press the OK or button.

4. If you desire to continue the next setup, press the OK or button on NEXT-SETUP. If you desire to exit from menu system, press the MENU OFF button on EXIT. Notes: The TUNER is assigned to the analog input, and are prevented from selecting any digital input. While the DTS-LD or DTS-CD is playing, this setup is not available, this is to avoid noise being generated from the analog input. Stop the LD or CD playback to setup. The SR4200 does not switch from digital input to analog input or vice versa automatically. In the event that both digital and analog inputs are connected to SR4200, if you desire to switch to an analog input temporarily, you can switch by pressing the A/D button y.

TEST MODE When you press the T.TONE ¤1, the test tone will be cycled through in a circular pattern which is FL (front left) → C (center) → FR (front right) → RS (right surround ) → LS (left surround) → SW (subwoofer) → FL → ... 3 seconds for each channel.

12 3. Recalling a Preset Station BASIC OPERATION 1. Press the F/P button !4 to change the display to preset. 2. Select the desired preset station by pressing TUNING/PRESET LISTENING TO THE TUNER or button !3 on the front panel or press CHANNEL button ⁄2 MANUAL TUNING on the remote. 1. To select the tuner as the source, press the TUNER button t on Note: the front panel or press the TUNER button c on the remote. To directly access the preset stations using the numeric keypad, 2. Press the TUNER button t on the front panel or press the select the desired preset station by entering one or two digits using ENGLISH TUNER button c on the remote to select the desired frequency the numeric keypad .. band if required. To return to the Manual Tuning mode, press the F/P button !4. 3. Press the F/P button !4 on the front panel to display the frequency. 4. Press the TUNING/PRESET or button !3 on the front panel or press the 1 or ¡ button ⁄2 on the remote. 4. Preset Scan Tuning (Using the remote control unit) 5. If FM is selected, press the MODE button !5 on the front panel or 1. Press the P.SCAN button ⁄0 on the remote control. (The preset press the MODE button ⁄2 on the remote control to select the station with the smallest preset number is recalled first. If no desired audio mode. stations have been preset, CH “00” blinks in the display and the unit returns to the previous mode.) 2. Preset stations are recalled in sequence (CH-1 → CH-2, etc.) for 5 (FM) MODE BUTTON OPERATION seconds each. Preset numbers that do not contain stations are When “M” indicator is on in the display, FM stations that broadcast in skipped. stereo will be received in stereo and the “STEREO” indicator lights. 3. You can fast forward the preset stations by pressing the When “M” indicator is off, all the FM stations will be received in mono CHANNEL ¢ button ⁄2 continuously. regardless of whether or not they are broadcasting in stereo. When the desired preset station is received, cancel the preset scan operation by pressing the CHANNEL 4 button ⁄2 or the CLEAR button !1. AUTO TUNING (USING THE SR4200) 1. Press the F/P button !4 on the front panel to display the frequency. 5. Clearing Preset Stations 2. Press the TUNING/PRESET or button !3 on the front panel You can remove preset stations from memory using the following for more than 1 second to start the Auto tuning function. procedure. 1. Recall the preset number to be cleared with the method described AUTO TUNING (USING THE REMOTE CONTROL UNIT) in “Recalling” a preset station . Press 1 or ¡ button ⁄2 for more than 1 second to start the Auto 2. Press the MEMORY button !2 on the front panel or MEMO button tuning function. ⁄6 on the remote unit, “MEMO” blinks in the display for 5 seconds. While “MEMO” is still blinking, press the CLEAR button !1 on the front panel or CLEAR button ⁄7 on the remote unit. PRESET TUNING “CLEAR” appears on the display to indicate that the specified With this unit you can preset up to 50 FM/AM (MW/LW) stations in any preset number has been cleared. order. For each station, you can memorize the frequency and reception mode if desired.

1-a. Manual Presetting (Using the SR4200) 1. Refer to the “MANUAL TUNING” or “AUTO TUNING” section above to tune in a desired station. 2. Press the MEMORY button !2. “MEMO” indicator starts blinking on the display. While “MEMO” is still blinking (approx. 5 seconds), select the preset number by pressing the TUNING/PRESET or button !3 then press the MEMORY button !2 again. 3. When a number has been properly input, “MEMO” indicator stops blinking and goes out. The station is now stored in the specified preset memory location.

1-b. Manual Presetting (Using the remote control unit) 1. Tune in a desired station. 2. Press the MEMO button ⁄6. 3. Enter the desired preset number with ten keypad .. * When entering a single digit number (2, for example), either input “02” or just input “2” and wait for a few seconds. * If a number other than 1-50 is entered by mistake, that number flashes in the display to indicate that it is invalid and the display returns to the original frequency display.

2. Auto Presetting This function automatically scans the AM (MW/LW) and FM band and enters all stations with sufficient signal strength into the memory. 1. Select the FM band with the TUNER button t. 2. Tune in the lowest receivable frequency. 3. Press and hold down the MEMORY button !2 and TUNING/ PRESET button !3 simultaneously, auto presetting will starts. 4. Each time the tuner finds a station, the scanning will pause and memory. 5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. To stop the auto preset function at anytime, press the CLEAR !1 button . 13 STATION NAME PRESET ENGLISH The station name preset function allows the name of each preset RDS OPERATION channel to be entered using alphanumeric characters. The Station Now in use in many countries, RDS (Radio Data System) is a Name button is valid only in the tuner mode. Before station name description of the station’s programming hidden space in the FM preset operation, store stations with the preset memory operation. signal. 1. Press the MEMORY button !2 on the front panel or MEMO button Your new receiver is equipped with RDS to assist in the selection of ⁄6 on the remote for more than 3 seconds. FM stations using station and network names, rather than broadcast 2. The left most column of the station name indicator flashes, frequencies. Additional RDS functions include the ability to search for indicating the character entry ready status. programme types. [Operation (Using the SR4200)] 3. When you press the TUNING/PRESET or buttons !3 is RADIO TEXT turned, alphabetic and numeric characters will be displayed in the Some RDS stations broadcast RADIO TEXT, which is additional following order: information on the station and programme being broadcast. A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A RADIO TEXT information appears as ‘running’ text in the display. UP → RADIO TEXT is transmitted character-by- character by the radio ← DOWN station. As a result of that it may take some time until the entire text 4. After selecting the first character to be entered, press the has been completely received. MEMORY button !2. The entry in this column is fixed and the next column starts to flash. Fill the next column and press the RDS DISPLAY MEMORY button !2 for more than 3 seconds to confirm the entry. When a receiver is tuned to an FM station that is transmitting RDS data, the Front Panel Information Display will automatically show the [Operation (Using the remote control unit)] station name or RDS TEXT in place of the typical display of the First, press the TUNER button c on the remote control unit. station’s broadcast frequency. ⁄2 (This operation is not necessary if the remote control unit has To change the display, press the RDS button on the remote already been operated in the TUNER mode.) controller. 3. Enter the character using the ten keypad .. For example, to PS (Program Service Name)RT (RADIO TEXT) Frequency enter “A”: 1) Press the “1” button. “A” appears on the display column. 2) Every time the 1 button is pressed, the displayed character PROGRAMME TYPE (PTY) DISPLAY changes in the order: A → B → C → 1 → A... The RDS system categorizes programmes according to their genre Pressing buttons other than the “1” button cause different into different programme type (PTY) groups. To display the characters to be displayed in a similar way, so that other programme type information of the current station, press the PTY alphanumeric characters can be entered. To enter a blank or button ⁄2 in the TUNER MODE on the remote controller. space, press the “9” button. 4. When the desired character is displayed, press the MEMO button PTY AUTO SEARCH ⁄6 to confirm the entry in this column and move to the next Your receiver is equipped to automatically search for stations column. After having filled all of the 8 columns, press the MEMO transmitting any of 29 different programme types. To search for a ⁄6 button , for more than 3 seconds to confirm the entry. PTY, follow these procedures: 1. Press the PTY button ⁄2 in the TUNER MODE on the remote controller. The current station’s PTY will be displayed, or the currently selected PTY group will be displayed in blinking if no FREQUENCY DIRECT CALL (Using the remote control station or RDS data is present. unit) 2. To change to a new PTY type, press the CHANNEL button ⁄2 1. Press the F.DIRECT button ⁄2 in the TUNER MODE on the until the desired PTY is shown in the display. remote controller. 3. Once the desired PTY group or type has been selected, press the 2. Front display will show “F-DIR IN”. PTY button ⁄2 while the display blink (approx. 5 seconds). The 3. Input your desired frequency with ten key pad button on the PTY Auto search will start, and the tuner will pause at each station remote. broadcasting RDS PTY information corresponding to the selected choice. 4. To advance to the next RDS station with the desired PTY, press the PTY button ⁄2 again within 5 seconds.

14 NUMBER DISPLAY PROGRAMME TYPE PLAYBACK OPERATION 1 POP Pop Music NORMAL PLAYBACK 2 ROCK Rock Music 1. Press the POWER button q / x. 2. Press the FUNCTION SELECTOR button t on the front panel or 3 MOR M. O. R. Music press the FUNCTION button c on the remote unit to select an 4 LIGHT Light classical input source. 5 CLASSIC Serious classical ENGLISH 6 NEWS News 7 AFFAIR Current Affairs 8 INFO Information 3. Turn the SURROUND MODE SELECTOR knob e on the front panel or Surround mode buttons . in the AMP MODE on the 9 SPORT Sport remote unit to select the desired surround mode. 10 EDUCATE Education 11 DRAMA Drama 12 CULTURE Culture AUTO 13 SCIENCE Science 4. Adjust the volume level using the VOLUME knob r on the front panel or press the MAIN VOL. button v on the remote. If 14 OTHERS Varied necessary, adjust the tone, press the TRB , TRB ⁄4 and BAS , 15 OTHER Other Music BAS ⁄5 on the remote unit. 16 WEATHER Weather Note: 17 FINANCE Finance In case of remote control operation, press one of the function buttons twice within 2 seconds to select the function. 18 CHILDREN Children’s programmes 19 SOCIAL Social Affairs 20 RELIGION Religion SETTING THE SLEEP TIMER 21 PHONE IN Phone In Set the sleep timer while the power is turned on. i ¤3 22 TRAVEL Travel 1. Turn the power ON and press the SLEEP button / . 2. Press the SLEEP button i / ¤3 the number of times to set the 23 HOBBIES Hobbies desired sleep time in minutes. 24 JAZZ Jazz Music Each press of the SLEEP button i / ¤3 or changes the display in the following order: 25 COUNTRY Country Music 26 NATION Music 10 20 30 40 50 27 OLDIES Oldies Music OFF 90 80 70 60 28 FOLK Folk Music The unit will shut off in the number of minutes indicated. 29 DOCUMENT Documentary * While the sleep timer is activated, the remaining time can be displayed for approximately 2 seconds by pressing the SLEEP button i / ¤3. * To cancel the sleep timer, press the SLEEP button i / ¤3 and then press the CLEAR button !1 / ⁄7.

15 ENGLISH SURROUND MODES The SR4200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.

Surroud mode FEATURES

1. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, PCM-audio or DTS. Note: When a Dolby Digital or DTS signal is input, the number of channels for which the corresponding signal is encoded will be played. Inputting a Dolby Digital two channel signal with Dolby surround status automatically subjects that signal to ProLogicII processing before play. 96 kHz source material can be playback in this mode and 96k will be shown in the display.

2. STEREO This mode bypasses all surround processing. Stereo program sources the left and right channels play normaly when PCM-audio or analog stereo is input. With Dolby Digital and DTS sources, the 5.1 multi-channels are converted to two channel stereo. 96 kHz source material can be playback in this mode and 96k will be shown in the display.

3. 2 This mode is used with source materials encoded in Dolby Digital and Dolby Surround. Dolby Pro Logic II brings the excitement of surround sound to any stereo mix, while making existing Dolby Surround mixes sound more like discrete 5.1 channels Surround sound. Dolby Pro Logic II has below 3 modes.

MOVIE This mode provides 5.1 channel surround sound from Dolby Surround encoded stereo movie sound tracks. MUSIC This mode provides 5.1 channel surround sound from conventional stereo sources, analog or digital, such as CD, tape, FM, TV, stereo VCR, etc.

PRO LOGIC This mode emulated original Dolby Pro Logic decoding (3/1 surround) suit for Dolby Surround encoded stereo movie soundtracks. Note: PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz. When a signal in another format is input, output will be muted.

4. DTS This mode is for DTS encoded source materials such as LASER DISC, CD, and DVD. The DTS mode cannot be used when an Analog input has been selected. When the signal in another digital format is input, output will be muted.

5. MOVIE These modes provide surround effect processing from each input source material. HALL They will produce theater, concert hall and stadium like atmospheres. Select as your taste desires. MATRIX Note: GAME PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and analog source material can playback in this mode.

6. VIRTUAL This mode create the virtual surround sound with the front right and left speakers. Note: PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and analog source material can playback in this mode.

7. 5-STEREO This mode is used to create a wider, deeper and more natural soundstage from two channel source material. This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel. Note: The 96 kHz sampling frequency mutes output.

Caution for DTS signal: Caution for 96kHz PCM-audio signal: This signal can be played when the connected DVD-player, laser- This signal can be played when a DVD-player or DAT-player disc player or CD-player is capable of DTS-digital output. For connected to the SR4200 is capable of 96 kHz PCM output. For details, refer to the player's operation manual. details, refer to the player’s operation manual. The signal can be played when STEREO or AUTO has been selected Depending on the player used, DTS play may produce noise. If that for the Surround mode. happens, set the Surround mode to DTS. Some DVD formatted discs featured copy protect. When use such disc, 96 kHz PCM signal is not output from the DVD player. For Playing a DTS-CD or DTS laser disc causes the player’s analog details, refer to the player's operation manual. output terminal to output noise. Before playing DTS sources, be sure to connect the player’s digital output to the SR4200’s digital input. Be careful when connecting the output of these players to analog audio input. Note that the SR4200 has the following restrictive functions built in to reduce noise emission as much as possible. If DTS is selected while in the Surround mode, digital input cannot be switched to analog input. When the analog input function has been selected, Surround mode cannot be switched to DTS. While signals from DTS-laser disc or CD are playing in another Surround mode, you cannot switch to digital input or from digital input to analog input.

16 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode buttons of the SR4200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; SURROUND OUTPUT FLUORESCENT INDICATOR INPUT SIGNAL MODE L/R LS/RS C SW FORMAT STATUS & SURROUND MODE TEMPORARY DISPLAY STATUS AUTO DOLBY DIGITAL(5.1CH) OOOO2 DIGITAL , AUTO >AUTO>

DOLBY DIGITAL(2CH) O ––O 2 DIGITAL , AUTO >AUTO> ENGLISH DOLBY DIGITAL(2CH:Lt/Rt) OOOO2 DIGITAL, MOVIE, AUTO >AUTO> 96KHZ PCM O –––PCM, STEREO , AUTO >AUTO> PCM(AUDIO) O ––O PCM, STEREO , AUTO >AUTO> ANALOG O ––O STEREO , AUTO >AUTO> DTS(5.1CH) OOOOdts , AUTO >AUTO> STEREO DOLBY DIGITAL(5.1CH) O ––O 2 DIGITAL,STEREO >STEREO> DOLBY DIGITAL(2CH) O ––O 2 DIGITAL,STEREO >STEREO> DOLBY DIGITAL(2CH:Lt/Rt) O ––O 2 DIGITAL,STEREO >STEREO> 96KHZ PCM O –––PCM, STEREO >STEREO> PCM(AUDIO) O ––O PCM, STEREO >STEREO> ANALOG O ––O STEREO >STEREO> DTS(5.1CH) O ––O dts , STEREO >STEREO> 2 DOLBY DIGITAL(5.1CH) OOOO2 DIGITAL >DOLBY D> MOVIE DOLBY DIGITAL(2CH) OOOO2 DIGITAL, MOVIE >DOLBY PLII> DOLBY DIGITAL(2CH:Lt/Rt) OOOO2 DIGITAL, MOVIE >DOLBY PLII> 96KHZ PCM ––––(PCM), 2, MOVIE >DOLBY PLII> PCM(AUDIO) OOOOPCM, 2, MOVIE >DOLBY PLII> ANALOG OOOO2, MOVIE >DOLBY PLII> DTS(5.1CH) ––––(dts), 2, MOVIE >DOLBY PLII> 2 DOLBY DIGITAL(5.1CH) OOOO2 DIGITAL >DOLBY D> MUSIC DOLBY DIGITAL(2CH) OOOO2 DIGITAL, MUSIC >DOLBY PLII> DOLBY DIGITAL(2CH:Lt/Rt) OOOO2 DIGITAL, MUSIC >DOLBY PLII> 96KHZ PCM ––––(PCM), 2, MUSIC >DOLBY PLII> PCM(AUDIO) OOOOPCM, 2, MUSIC >DOLBY PLII> ANALOG OOOO2, MUSIC >DOLBY PLII> DTS(5.1CH) ––––(dts), 2, MUSIC >DOLBY PLII> 2 DOLBY DIGITAL(5.1CH) OOOO2 DIGITAL >DOLBY D> PRO LOGIC DOLBY DIGITAL(2CH) OOOO2 DIGITAL, 2 PRO LOGIC >DOLBY PL> DOLBY DIGITAL(2CH:Lt/Rt) OOOO2 DIGITAL, 2 PRO LOGIC >DOLBY PL> 96KHZ PCM ––––(PCM), 2 PRO LOGIC >DOLBY PL> PCM(AUDIO) OOOOPCM, 2 PRO LOGIC >DOLBY PL> ANALOG OOOO2 PRO LOGIC >DOLBY PL> DTS(5.1CH) ––––(dts), 2 PRO LOGIC >DOLBY PL> DTS DOLBY DIGITAL(5.1CH) ––––(2), dts >DTS> DOLBY DIGITAL(2CH) ––––(2), dts >DTS> DOLBY DIGITAL(2CH:Lt/Rt) ––––(2), dts >DTS> 96KHZ PCM ––––(PCM), dts >DTS> PCM(AUDIO) ––––(PCM), dts >DTS> DTS(5.1CH) OOOOdts >DTS> MOVIE DOLBY DIGITAL(5.1CH) ––––(2), DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> HALL DOLBY DIGITAL(2CH) ––––(2), DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> MATRIX DOLBY DIGITAL(2CH:Lt/Rt) ––––(2), DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> GAME 96KHZ PCM ––––(PCM), DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> PCM(AUDIO) OOOOPCM, DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> ANALOG OOOODSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> DTS(5.1CH) ––––(dts),DSP, MOVIE/ HALL/ MATRIX/ GAME >MOVIE/ HALL/ MATRIX/ GAME> VIRTUAL DOLBY DIGITAL(5.1CH) ––––(2), DSP, VIRTUAL >VIRTUAL> DOLBY DIGITAL(2CH) ––––(2), DSP, VIRTUAL >VIRTUAL> DOLBY DIGITAL(2CH:Lt/Rt) ––––(2), DSP, VIRTUAL >VIRTUAL> 96KHZ PCM ––––(PCM), DSP, VIRTUAL >VIRTUAL> PCM(AUDIO) O ––O PCM, DSP, VIRTUAL >VIRTUAL> ANALOG O ––O DSP, VIRTUAL >VIRTUAL> DTS(5.1CH) ––––(dts),DSP, VIRTUAL >VIRTUAL> 5-STEREO DOLBY DIGITAL(5.1CH) OOOO2 >5-STEREO> DOLBY DIGITAL(2CH) OOOO2 >5-STEREO> DOLBY DIGITAL(2CH:Lt/Rt) OOOO2 >5-STEREO> 96KHZ PCM ––––(PCM) >5-STEREO> PCM(AUDIO) OOOOPCM >5-STEREO> ANALOG OOOO >5-STEREO> DTS(5.1CH) OOOOdts >5-STEREO>

Note: L/R : Front speaker ( ): The indicator blinks • Dolby Digital (2 ch: Lt/Rt): signal with Dolby Surround flag Speakers are full set. LS/RS : Surround speaker • When 2, dts or PCM is blinking, the selected surround mode is unavailable for C : Center speaker input signal. Select the other appropriate surround mode to playback. SW : Sub woofer speaker • No sound outputs from the surround speaker, center speaker and subwoofer if the DVD disc has no surround data.

17 If the unit does not operate properly, check items shown in the following table. ENGLISH TROUBLE SHOOTING If your trouble cannot be recovered with the remedy actions listed in In case of trouble, check the following before calling for service: the following table, malfunction of the internal circuitry is suspected; 1. Are the connections made properly ? immediately unplug the power cable and contact your dealer, nearest 2. Are you operating the unit properly following user’s guide ? Marantz distributor or the Marantz Service Center in your country. 3. Are the power amplifiers and speaker working properly ?

SYMPTOM CAUSE REMEDY

SR4200 cannot be turned up. The power plug is not connected. Connect the power plug to the outlet.

No sound and picture are output Mute is on. Cancel mute using the remote control unit. even when power is on. The input cable is not connected correctly. See the connection diagram and connect the cables correctly. The master volume control is turned all the way down. Adjust the master volume. The function selector position is wrong. Select correct position.

Speaker does not outputting any The headphones are connected to the headphone jack. Disconnect the headphones. (Speakers will not output sound when sound. headphones are connected.)

Sound and pictures from other Input cable connected incorrectly. Connect the cable correctly by referring to the connection diagram. than equipment selected with the function selector.

Sound from the wrong channel is Speaker cable connected incorrectly. Connect the cable correctly by referring to the connection diagram. output from the speaker.

No sound is output from the center The center speaker cable connection is incomplete. Connect the cable correctly. speaker. STEREO has been selected for Surround mode. When STEREO is selected for Surround mode, no sound will be output from the center speaker. Set another Surround mode. Center = NONE has been selected in SETUP mode. Make the correct setting.

No sound is output from the The surround speaker cable connection is incomplete. Connect the cable correctly. surround speakers. STEREO has been selected for Surround mode. When STEREO has been selected for Surround mode, no sound will be output from the surround speaker. Set another Surround mode. Surround = NONE has been selected in SETUP mode. Make the correct setting.

No output to Sub Woofer Out. Sub-woofer = NO has been selected in SETUP mode. Select Sub-woofer = YES.

Surround mode cannot be changed. The headphones are connected to the jack. Disconnect the headphones. (When headphones are connected, Surround mode will be fixed to STEREO.)

Noise is produced during DTS- Analog has been selected for input. Be sure to perform digital connection, select digital input, then play. encoded CD or laser disc play.

DTS sources cannot be played. Surround mode is set to DOLBY. Select other mode. The DVD or LD player is not DTS digital out capable. Use a player which responds to DTS-digital out.

Player skips during play of a DTS Data error occurred during player skip. Set Surround mode to DTS. source and produces noise.

A 96kHz PCM signal cannot be The disc player is not 96kHz PCM digital out capable. Use a player that responds to 96kHz PCM digital out. played. Surround mode is set to other than STEREO and AUTO. Set Surround mode to STEREO or AUTO.

A normal PCM signal (CD or laser Surround mode is set to DTS. Select other mode. disc) cannot be played.

A Dolby Digital signal cannot be Surround mode is set to DTS. Select other mode. played.

A specific channel does not Nothing recorded on source. Check the encoded channel on the source side. produce output.

FM or AM reception fails. Antenna connection is incomplete. Correctly connect the indoor FM and AM antennas to FM and AM antenna outlets.

Noise is heard during AM reception. Reception is affected by other electrical fields. Try changing location where the AM indoor antenna is set up.

Noise is heard during FM reception. The radio waves from the broadcasting station are weak. Install an FM outdoor antenna.

Cannot get programmed station Preset data has been erased. Disconnecting power plug for long periods of time will erase preset when the PRESET button is data. If that happens, input the preset data again. pressed.

Nothing appears on the remote Batteries are consumed. Replace all the batteries with new ones. commander display.

Control with the remote control unit Batteries are consumed.. Replace all the batteries with new ones.. fails. Remote controller's function-key setting is wrong. Select different position from which equipment will be controlled. The distance between this SR4200 and the remote Move closer to this SR4200. commander is too far. Something is blocking SR4200 and the remote commander. Remove offending object.

18 GENERAL MALFUNCTION HOW TO RESET THE UNIT If the equipment malfunctions, this may be because an electrostatic Should the operation or display seem to be abnormal, reset the unit discharge or AC line interference has corrupted the information in the with the following procedure. equipment memory circuits. Therefore: Press POWER button x to set SR4200 in standby mode, then press - disconnect the plug from the AC line supply and hold the F/P !4 until SR4200 is turned on. - after waiting at least three minutes, reconnect the plug to the AC Remember that the procedure will reset the settings of the function line supply selector, Surround mode, delay time, TUNER PRESET etc., to their

- re-attempt to operate the equipment initial settings. ENGLISH

Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR4200 is equipped with a backup function to prevent memory data such as the preset memory from being erased. The memory functions are backed up for up to about one week. NOTE: First of all keep SR4200 Standby or Powered-on more than 6 hours, to sufficient time for memory back up.

19 SETUP CODES MD PLAYERS ...... 1900 Kenwood ...... 1708, 1853 Marantz ...... 1207 CD ...... 1895 ...... 0151, 0184 Optimus ...... 1090 Burmester...... 0447 Pioneer ...... 1090 California Audio Labs ...... 0056, 0330 Sharp...... 1888 Carver ...... 0184, 0206, 0326, 0464 Sherwood ...... 1094 DKK ...... 0027 ...... 1517 Denon...... 0030 Yamaha ...... 1915 Emerson ...... 0332 Fisher ...... 0201, 0206 Garrard ...... 0420, 0447 CDR Genexxa ...... 0059, 0332 Harman/Kardon ...... 0184, 0200 Marantz ...... 0999 ...... 0059 JVC ...... 0099 Kenwood ...... 0055, 0064, 0217 TAPE Krell ...... 0184 LXI ...... 0332 Aiwa ...... 0056, 0224 Linn ...... 0184 Carver ...... 0056 ...... 0062, 0120, 0293, 0354, 0355, 0457, 0459, 0510, 0516 Denon...... 0103 MCS ...... 0056 Garrard ...... 0335, 0336 MTC ...... 0447 Harman/Kardon ...... 0056, 0209 Magnavox...... 0184, 0332 JVC ...... 0271, 0300 Marantz ...... 0056, 0184, 0207, 1207, 0999, Kenwood ...... 0097 Mission ...... 0184 Magnavox...... 0056 NAD...... 0046, 0326, 0343, 0747, 0748 Marantz ...... 0056 NSM ...... 0184 NAD...... 0171 ...... 0106, 0174, 0466, 0471, 0691 Onkyo ...... 0162, 0309 Nikko ...... 0201 Optimus ...... 0054, 0247 Onkyo ...... 0128 ...... 0256 Optimus ...... 0027, 0059, 0064, 0172, 0206, 0332, 0447, 0464, 0495 Philips...... 0056 Panasonic ...... 0056, 0330 Pioneer ...... 0054, 0126, 0247 Parasound ...... 0447 Polk Audio ...... 0056 Philips...... 0184 RCA...... 0054, 0247 Pioneer ...... 0059, 0271, 0332, 0495 Samsung ...... 0418, 0419 Polk Audio ...... 0184 Sansui ...... 0056 Proton...... 0184 Sony ...... 0197, 0270, 0318 QED ...... 0184 Teac ...... 0307, 0335, 0336, 0418, 0419 Quasar ...... 0056 ...... 0256 RCA...... 0059, 0080, 0206, 0332, 0495, 0791 Victor ...... 0300 Realistic...... 0206, 0207, 0447 Wards ...... 0054 ...... 0184, 0447 Yamaha ...... 0121, 0124 SAE ...... 0184 Sansui ...... 0184, 0332 ...... 0206 Scott ...... 0332 SAT (DSS) Sears ...... 0332 AlphaStar ...... 0799 Sharp...... 0064, 0207 Echostar ...... 0802, 1032 Sherwood ...... 0207 Expressvu ...... 0802 Sonic Frontiers ...... 0184 General Instrument ...... 0388, 0654, 0896 Sony ...... 0027, 0212 HTS ...... 0802 Soundesign ...... 0172 Hitachi ...... 0846 Tascam ...... 0447 Hughes Network Systems ...... 0776 Teac ...... 0201, 0207, 0420, 0447 JVC ...... 0802 Technics ...... 0056, 0330 Jerrold ...... 0388, 0654 ...... 0046, 0326 Magnavox...... 0749, 0751 Victor ...... 0099 Memorex ...... 0751 Wards ...... 0080, 0184 Next Level ...... 0896 Yamaha ...... 0063, 0214 Panasonic ...... 0728 Yorx ...... 0488 Philips...... 0749, 0751, 1103 Primestar ...... 0388, 0654 RCA...... 0170, 0419, 0593, 0882 Radio Shack ...... 0896 Sony ...... 0666 Star Choice ...... 0896 Toshiba ...... 0776, 0817 ...... 0749, 0751 Zenith ...... 0883 I Marantz ...... 0057, 0081, 1581 Matsushita ...... 0277 TV Megatron ...... 0172, 0205 AOC ...... 0046, 0057 Memorex ..... 0043, 0083, 0177, 0181, 0205, 0206, 0277, 0490 Admiral ...... 0120, 0490 Midland...... 0044, 0074, 0078 Aiko ...... 0119 Mitsubishi ...... 0046, 0120, 0177, 0205 ...... 0057 Motorola ...... 0120 Alaron ...... 0206 Multitech ...... 0207 Ambassador ...... 0204 NAD...... 0183, 0193, 0205 America Action ...... 0207 NEC...... 0046, 0057, 0083 Anam ...... 0207 NTC ...... 0119 Audiovox ...... 0119, 0207, 0478, 0650 Nikko ...... 0057, 0119, 0205 Baysonic...... 0207 Onwa ...... 0207 Belcor ...... 0046 Optimus ...... 0181, 0193, 0277 Bell & Howell ...... 0043, 0181 ...... 0120, 0192 Bradford ...... 0207 Orion ...... 0206, 0263, 0490 Brockwood ...... 0046 Panasonic ...... 0078, 0277 Broksonic ...... 0263, 0490 Penney ...... 0046, 0057, 0074, 0078, 0083, 0087, 0183, 0205, 1374 CXC...... 0207 Philco ...... 0046, 0057, 0081, 0172, 0490 Candle ...... 0057, 0083 Philips...... 0081 Carnivale ...... 0057 Pilot ...... 0046, 0057 Carver ...... 0081 Pioneer ...... 0193, 0706 Celebrity ...... 0027 Portland ...... 0046, 0119 Cineral ...... 0119, 0478 Prism ...... 0078 Citizen ...... 0057, 0083, 0087, 0119 Proscan ...... 0074 Concerto...... 0083 Proton...... 0205 Contec ...... 0207 Pulsar ...... 0044, 0046 Craig...... 0207 Quasar ...... 0078, 0192, 0277 Crosley ...... 0081 RCA...... 0046, 0074, 0078, 0117, 0120, 0706, 1074, Crown ...... 0207 1174, 1274, 1374, 1474 Curtis Mathes ...... 0043, 0057, 0074, 0078, 0081, 0083, 0087, Radio Shack ...... 0046, 0057, 0074, 0083, 0181, 0192, 0205, 0207 0120, 0172, 0181, 0193, 0478, 1174, 1374 Realistic...... 0046, 0057, 0083, 0181, 0192, 0205, 0207 Daewoo ...... 0046, 0119, 0478, 0650, 0651 Runco ...... 0044, 0057, 0630 Daytron...... 0046 SSS ...... 0046, 0207 Denon...... 0172 Sampo ...... 0057 Dumont...... 0044, 0046 Samsung ...... 0046, 0057, 0083, 0087, 0205 Dwin ...... 0747, 0801 Sansei ...... 0478 Electroband ...... 0027 Sansui ...... 0490 Emerson ..... 0046, 0181, 0204, 0205, 0206, 0207, 0263, 0490, Sanyo ...... 0181 0650, 0651 Scimitsu...... 0046 Envision...... 0057 Scotch ...... 0205 Fisher ...... 0181 Scott ...... 0046, 0205, 0206, 0207, 0263 ...... 0206, 0710 Sears ...... 0074, 0081, 0083, 0181, 0183, 0205, 0206 ...... 0206, 0207 Semivox ...... 0207 Futuretech ...... 0207 Semp ...... 0183 GE ...... 0074, 0078, 0120, 0205, 0478, 1174, 1374 Sharp...... 0120, 0192, 0715 Gibralter ...... 0044, 0046, 0057 Shogun ...... 0046 GoldStar ...... 0046, 0057, 0083, 0205 Signature ...... 0043 Gradiente ...... 0080, 0083 Sony ...... 0027 Grunpy ...... 0206, 0207 Soundesign ...... 0205, 0206, 0207 Hallmark ...... 0205 Starlite ...... 0207 Harley Davidson ...... 0206 Supreme...... 0027 Harman/Kardon ...... 0081 Sylvania...... 0057, 0081 Harvard ...... 0207 TMK...... 0083, 0204, 0205 Hitachi ...... 0043, 0083, 0172 TNCi ...... 0044 Infinity ...... 0081 Tandy ...... 0120 Inteq ...... 0044 Technics ...... 0078, 0277 JBL ...... 0081 Technol Ace ...... 0206 JCB ...... 0027 Techwood...... 0078, 0083 JVC ...... 0080 Teknika...... 0043, 0046, 0081, 0083, 0087, 0119, 0177, 0206, 0207 KEC ...... 0207 Telefunken ...... 0083 KTV ...... 0057, 0207 Toshiba ...... 0087, 0181, 0183, 1283 Kenwood ...... 0046, 0057 Vector Research ...... 0057 LG ...... 0083 Victor ...... 0080 LXI ...... 0074, 0081, 0181, 0183, 0205 Vidikron ...... 0081 Logik...... 0043 Vidtech ...... 0046, 0205 Luxman ...... 0083 Wards ...... 0043, 0046, 0057, 0081, 0083, 0192, 0205, 0206 MGA ...... 0046, 0057, 0177, 0205 White Westinghouse ...... 0490, 0650, 0651 MTC ...... 0046, 0057, 0083, 0087 Yamaha ...... 0046, 0057 Magnavox...... 0057, 0081, 0206, 1281 Zenith ...... 0043, 0044, 0119, 0490, 0651 Majestic ...... 0043

II NEC...... 0094, 0131 VCR Nikko ...... 0064 Admiral ...... 0075, 0236 Noblex ...... 0267 Adventura ...... 0027 Olympus ...... 0062 Aiko ...... 0305 Optimus ...... 0064, 0075, 0085, 0131, 0189, 0459, 1075, 1089, Aiwa ...... 0027, 0064 1189, 1289 America Action ...... 0305 Orion ...... 0211, 0236, 0506 American High...... 0062 Panasonic ...... 0062, 0189, 0252, 0643, 1089, 1189, 1289 Asha ...... 0267 Penney ...... 0062, 0064, 0069, 0267 Audiovox ...... 0064 ...... 0069 Beaumark ...... 0267 Philco ...... 0062, 0236, 0506 Bell & Howell ...... 0131 Philips...... 0062, 0108, 0645, 1108, 1208 Broksonic ...... 0148, 0211, 0236, 0506 Pilot ...... 0064 CCE...... 0099, 0305 Pioneer ...... 0085, 0094 Calix ...... 0064 Polk Audio ...... 0108 Canon...... 0062 Profitronic ...... 0267 Carver ...... 0108 Proscan ...... 0087 Cineral ...... 0305 Protec ...... 0099 Citizen ...... 0064, 0305 Pulsar ...... 0066 Colt ...... 0099 Quasar ...... 0062, 0189, 1189 Craig...... 0064, 0074, 0099, 0267 RCA...... 0062, 0069, 0075, 0085, 0087, 0267 Curtis Mathes ...... 0062, 0087, 0189 Radio Shack ...... 0027, 1064 Cybernex ...... 0267 Radix ...... 0064 Daewoo ...... 0072, 0305 Randex ...... 0064 Denon...... 0069 Realistic...... 0027, 0062, 0064, 0074, 0075, 0131 Dynatech ...... 0027 ReplayTV ...... 0641, 0643 Electrohome ...... 0064 Runco ...... 0066 Electrophonic ...... 0064 STS ...... 0069 Emerex ...... 0059 Samsung ...... 0072, 0267 Emerson ..... 0027, 0064, 0070, 0148, 0211, 0236, 0305, 0506 Sanky ...... 0066, 0075 Fisher ...... 0074, 0131 Sansui ...... 0027, 0094, 0236, 0506 Fuji ...... 0062 Sanyo ...... 0074, 0131, 0267 Funai ...... 0027 Scott ...... 0070, 0072, 0148, 0211 GE ...... 0062, 0075, 0087, 0267 Sears ...... 0027, 0062, 0064, 0069, 0074, 0131 Garrard ...... 0027 Semp ...... 0072 Go Video ...... 0459 Sharp...... 0075 GoldStar ...... 0064 Shintom ...... 0099 Gradiente ...... 0027 Shogun ...... 0267 HI-Q...... 0074 Singer ...... 0099 Harley Davidson ...... 0027 Sony ...... 0027, 0059, 0062, 1059 Harman/Kardon ...... 0108 Sylvania...... 0027, 0062, 0070, 0108 Harwood ...... 0099 Symphonic ...... 0027 Hitachi ...... 0027, 0069 TMK...... 0267 Hughes Network Systems ...... 0069 Teac ...... 0027 JVC ...... 0094 Technics ...... 0062, 0189 KEC ...... 0064, 0305 Teknika...... 0027, 0062, 0064 KLH ...... 0099 Thomas ...... 0027 Kenwood ...... 0094 Tivo ...... 0645 Kodak ...... 0062, 0064 Toshiba ...... 0070, 0072 LXI ...... 0064 Totevision ...... 0064, 0267 Lloyd’s ...... 0027 Unitech ...... 0267 Logik...... 0099 Vector ...... 0072 MEI ...... 0062 Video Concepts ...... 0072 MGA ...... 0070, 0267 Videosonic ...... 0267 MGN Technology ...... 0267 Wards ...... 0027, 0062, 0069, 0074, 0075, 0087, 0099, 0108, 0267 MTC ...... 0027, 0267 White Westinghouse ...... 0099, 0236, 0305 Magnasonic ...... 0305 XR-1000 ...... 0027, 0062, 0099 Magnavox...... 0027, 0062, 0066, 0108 Zenith ...... 0027, 0066, 0236, 0506 Magnin ...... 0267 Marantz ...... 0062, 0108, 1408 Marta ...... 0064 Matsushita ...... 0062, 0189 Memorex .... 0027, 0062, 0064, 0066, 0074, 0075, 0131, 0189, 0236, 0267, 0506, 1064, 1189, 1289 ...... 0069 Mitsubishi ...... 0070, 0075, 0094 Motorola ...... 0062, 0075 Multitech ...... 0027, 0099 NAD...... 0085

III DVD

Aiwa ...... 0668 Apex ...... 0699 Denon...... 0517, 0661 Fisher ...... 0697 GE ...... 0549 Harman/Kardon ...... 0609 Hitachi ...... 0691 Hiteker ...... 0699 JVC ...... 0585, 0650 Kenwood ...... 0561, 0709 Magnavox...... 0530, 0702 Marantz ...... 0566 Mitsubishi ...... 0548 Onkyo ...... 0530, 0654 Optimus ...... 0598 Oritron ...... 0678 Panasonic ...... 0517, 0659 Philips...... 0530, 0566 Pioneer ...... 0552, 0598, 0659 Proscan ...... 0549 RCA...... 0549, 0598 Samsung ...... 0600 Sharp...... 0657 Sony ...... 0560 Technics ...... 0517 Theta Digital ...... 0598 Toshiba ...... 0530 Yamaha ...... 0517, 0572 Zenith ...... 0530, 0618

IV TECHNICAL SPECIFICATIONS

FM TUNER SECTION Frequency Range ...... 87.5 - 108.0 MHz Usable Sensitivity ...... IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ...... Mono/Stereo 70/65 dB Distortion ...... Mono/Stereo 0.2/0.3 % Stereo Separation ...... 1 kHz 45 dB Alternate Channel Selectivity ...... ± 300 kHz 60 dB Image Rejection ...... 98 MHz 70 dB Tuner Output Level ...... 1 kHz, ± 40 kHz Dev 600 mV

AM TUNER SECTION Frequency Range ...... LW: 152 - 282 kHz, MW: 531 - 1602 kHz Signal to Noise Ratio ...... 50 dB Usable Sensitivity ...... Loop 400 µV/m Distortion ...... 400 Hz, 30 % Mod. 0.5 % Selectivity ...... ± 18 kHz 60 dB

AUDIO SECTION Maximum Power Output (6 ohms / EIAJ) Front ...... 100W Center ...... 100W Surround ...... 100W Continuous Power Output (8 ohms / 20 Hz - 20 kHz) Front ...... 70W Center ...... 70W Surround ...... 70W THD Front (20 Hz - 20 kHz) ...... 8 ohms 0.09 % Input Sensitivity/Impedance Linear ...... 316 mV/ 47 Kohms Signal to Noise Ratio Linear ...... 99 dB

VIDEO Input Level/Impedance ...... 1 Vp-p/ 75 ohms Output Level/Impedance ...... 1 Vp-p/ 75 ohms

GENERAL Power Requirement ...... AC 230 V 50 Hz Power Consumption ...... 280 W Dimension (MAX) Width...... 440 mm Height ...... 164 mm Depth ...... 365 mm Weight...... 9.7 Kg

ACCESSORIES Remote Control Unit RC5200SR ...... 1 AAA-size batteries ...... 2 FM Lead Type Antenna ...... 1 AM Loop Antenna ...... 1 AC Power Cord ...... 1 Registration Card ...... 1 User Guide ...... 1

Specifications subject to change without prior notice. COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria BAHREIN Ambassador Stores P.O. Box 237,141, Government Avenue, Manama,Bahrein BANGLADESH Target 1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh BELGIUM Van der Heyden Audio N.V. Brusselbaan 278, 9320 Erembodegem, Belgium BULGARIA Ariescommerce GmbH Makedonia Blvd. 16, 1606 Sofia, Bulgaria CANADA Lenbrook Industries Limited 633 Granite Court, Pickering, Ontario CHINA Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China CYPRUS Empire Hifi systems Ltd. P.O. Box 5604, Nicosia, Cyprus Audio International Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic Audio Nord Dali Allé 1, 9610 Noerager, Denmark DUBAI V.V.& SONS P.O. Box 105, Dubai, U.A.E. EGYPT Solimco 9, El Attibaa St. Doki, Cairo, Egypt ESTONIA HiFi Club Estonia Ehte 4, 90503 Haapsalu, Estonia F.Y.R.O.M. T.P. KODI ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija FINLAND Audio Nord Uudenmaankatu 4-6, Helsinki SF-00120, Finland Marantz France A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France Marantz Deutschland Hakenbusch 3, 49078 Osnabrück, Germany GREECE Adamco S.A. 188, Hippocratous Street, 11471 Athens, Greece HEADQUARTERS EUROPE: Marantz Europe B.V. Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands HONG KONG Marantz Asia Ltd. Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong HUNGARY Infovox Ltd. Terez Krt.31, 1067 Budapest, Hungary ICELAND ID Electronics Ltd. Armula 38, 108 Reykjavik, Iceland INDIA NOVA Audio Private 8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India IRAN Home Co. 5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran IRELAND Marantz Ireland Clonskeagh, Dublin 14, Ireland ISRAEL Elmor Ltd. 52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel Marantz Italy Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde IVORY COAST Hifivoir B.P. 2428, Abidjan 01, Ivory Coast Marantz Japan Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan KOREA Mk Enterprises Ltd. 121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea KUWAIT alAlamiah Electronics Intl. P.O. Box 8196, Salmiah 22052, Kuwait LATVIA Ace Ltd. 61, LacPlesa Str., Riga LV 1011, Latvia LEBANON AZ Electronics S.A., 1, P.O. Box 11 2833, Beirut, Lebanon LITHUANIA Accapella Ltd. Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania MALAYSIA Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia MALTA Doneo Co Ltd. 78 The Strand, Sliema SLM07, Malta MAURITIUS SKR Electronics Ltd. P.O. Box 685, Bell Village, Port Louis, Mauritius MILITARY MARKET EUROPE PASCO GmbH PO BOX 1280, Sandhausen 69200, Germany NETHERLANDS Marantz Domestic Sales A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands NEW ZEALAND Wildash Audio Systems 14 Malvern Road, Mt. Albert, Auckland, New Zealand NORWAY Audio Nord Sandkerveien 64, Oslo 0483, Norway OMAN Mustafa & Jawad Trading CO. P.O. Box 1918, Ruwi, Oman Philips Polska Sp. z.o.o. Al.Jerozolimskie 195b, 02 222 Warszawa, Poland PORTUGAL Corel2 Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal PROFESSIONAL EUROPE Marantz Professional Products Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K. PROFESSIONAL U.S.A. Marantz Professional Products Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illino QATAR Almana & Partners W.W.L. P.O. Box 49, Doha, Qatar REUNION Vision + 180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion Nova Music Entertainment 5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania RUSSIA Absolute Audio 7/2, Montazhnaya Street, 107497 Moscow, Russia SAUDI ARABIA Adawlia Univ. Electr. Apl P.O. Box 2154, Alkhobar 31952, Saudi Arabia SINGAPORE Wo Kee Hong Distribution PTE Ltd. 130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357 Bis Audio s.r.o. Nam. SNP 10, 96001 Zvolem, Slovakia SLOVENIA Bofex Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia SOUTH AFRICA Coherent Imports (PTY) Ltd. P.O. Box 1614, Alberton, 1450, South Africa SPAIN Marantz Spain Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain SRI LANKA The listening Room Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka Audio Nord Almedalsvagen 4, Gotenborg 402-23, Sweden SWITZERLAND Sound Company AG Postfach, 8010 Zürich, Switzerland SYRIA Hamzeh & Partners Hafez Ibrahim Str. No 117, Damascus Shalan, Syria TAHITI Covecolor Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti TAIWAN Pai-Yuing Co. Ltd. 6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C. THAILAND MRZ Standard Co. Ltd. 746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand TUNESIA Societe EDEVIG 40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey U.K. Marantz Hifi UK Ltd. Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K. U.S.A. Marantz America Inc. 440 Medinah Road, Roselle, IL 60172, U.S.A. YUGOSLAVIA ITM Company Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia EXPORT Marantz Domestic Sales A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands www.marantz.com Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

R is a registered trademark.

Printed in China 01/05 MITi 319W851310